Philips XL4951DS/38 Manuale utente

www.philips.com/support

User manual

Always there to help you

Register your product and get support at

XL490

XL495

Question?

Contact

Philips

1EN

Contents

1 Important safety instructions 3

2 Your phone 5

What is in the box 5

Overview of the phone 6

Overview of the base station 7

3 Get started 8

Connect the base station 8

Install the handset 8

Congure your phone (country

dependent) 9

Change the remote access PIN code

(for XL495) 9

Charge the handset 10

Check the battery level 10

What is standby mode? 10

Display icons 10

Check the signal strength 11

Switch the handset on or off 11

4 Calls 12

Make a call 12

Answer a call 12

End a call 13

Adjust the earpiece/speaker volume 13

Mute the microphone 13

Turn the speaker on or off 13

Make a second call 13

Answer a second call 13

Switch between two calls 13

Make a conference call with the

external callers 14

5 Intercom and conference calls 15

Make a call to another handset 15

Make a conference call 15

6 Text and numbers 17

Enter text and numbers 17

Switch between uppercase and

lowercase 17

7 Phonebook 18

Direct keys 18

Direct access memories 18

View the phonebook 18

Search a record 18

Call from the phonebook 19

Access the phonebook during a call 19

Add a record 19

Edit a record 19

Delete a record 19

Delete all records 20

8 Call log 21

Call list type 21

View the call records 21

Save a call record to the phonebook 21

Return a call 21

Delete a call record 22

Delete all call records 22

9 Redial list 23

View the redial records 23

Save a redial record to the phonebook 23

Redial a call 23

Access the redial list during a call 23

Delete a redial record 23

Delete all redial records 23

10 Phone settings 24

Sound settings 24

Eco mode 25

ECO+ mode 25

Name the handset 26

Set the date and time 26

Set the display language 26

Auto answer 26

Set the handset LED indicator behavior 27

11 Alarm clock 28

Set the alarm 28

Turn off the alarm 28

2 EN

12 Telephone answering machine 29

Turn the answering machine on or off 29

Family notes 29

Set the answering machine language 29

Set the answer mode 30

Announcements 30

Incoming messages 30

Remote access 32

13 Services 34

Call list type 34

Auto conference 34

Call barring 34

Call blocking 35

Network type 36

Auto prex 36

Select the recall duration 36

Dial mode 36

Auto clock 37

Register additional handsets 37

Unregister the handsets 37

Restore default settings 38

14 Technical data 39

15 Notice 40

Declaration of conformity 40

Use GAP standard compliance 40

Compliance with EMF 40

Disposal of your old product and battery 40

16 Appendix 42

Text and number input tables 42

17 Frequently asked questions 44

18 Index 46

3EN

1 Important safety

instructions

Power requirements

• This product requires an electrical supply

of 100-240 volts AC. In case of power

failure, the communication can be lost.

• The voltage on the network is classied

as TNV-3 (Telecommunication Network

Voltages), as dened in the standard EN

60950.

Warning

• The Electrical network is classied as hazardous. The

only way to power down the charger is to unplug the

power supply from the electrical outlet. Ensure that the

electrical outlet is always easily accessible.

To avoid damage or malfunction

Caution

• Use only the power supply listed in the user

instructions.

• Use only the batteries listed in the user instructions.

• Risk of explosion if battery is replaced by an incorrect

type.

• Dispose of used batteries according to the instructions.

• Do not dispose of batteries in re.

• Always use the cables provided with the product.

• Do not allow the charging contacts or the battery to

come into contact with metal objects.

• Do not let small metal objects come into contact with

the product. This can deteriorate audio quality and

damage the product.

• Metallic objects may be retained if placed near or on

the handset receiver.

• Do not use the product in places where there are

explosive hazards.

• Do not open the handset, base station or charger as

you could be exposed to high voltages.

• For pluggable equipment, the socket-outlet shall

be installed near the equipment and shall be easily

accessible.

• Handsfree activation could suddenly increase the

volume in the earpiece to a very high level: make sure

the handset is not too close to your ear.

• This equipment is not designed to make emergency

calls when the power fails. An alternative has to be

made available to allow emergency calls.

• Do not allow the product to come into contact with

liquids.

• Do not use any cleaning agents containing alcohol,

ammonia, benzene, or abrasives as these may harm

the set.

• Do not expose the phone to excessive heat caused by

heating equipment or direct sunlight.

• Do not drop your phone or allow objects to fall on

your phone.

• Active mobile phones in the vicinity may cause

interference.

About operating and storage temperatures

• Operate in a place where temperature is

always between 0°C to +40°C (up to 90%

relative humidity).

• Store in a place where temperature is

always between -20°C and +45°C (up to

95% relative humidity).

• Battery life may be shorter in low

temperature conditions.

4 EN

•

5EN

2 Your phone

Congratulations on your purchase and welcome

to Philips!

To fully benet from the support that Philips

offers, register your product at www.philips.

com/welcome.

What is in the box

Handset**

Base station (XL490)

Base station (XL495)

Charger**

Power adapter**

Line cord*

Guarantee

User manual

Quick start guide

Note

• * In some countries, you have to connect the line

adapter to the line cord, then plug the line cord to the

telephone socket.

Tip

• ** In multi-handset packs, there are additional handsets

and chargers and power adapters.

4XLFNVWDUWJXLGH

6 EN

Overview of the phone

a Earpiece

b

• Scroll up on the menu.

• Increase the earpiece/speaker volume.

• Access the phonebook in standby

mode.

c

• Delete text or digits.

• Cancel operation.

• Access the redial list in standby mode.

• Change the sound prole during a call.

d

• End the call.

• Exit the menu/operation.

a

c

d

e

b

h

g

i

f

j

k

l

m

n

o

p

q

r

• Press and hold to switch the handset

on or off.

e m1/m2/m3

Store the emergency phone numbers or

numbers you call frequently.

f

• Press to enter a space during text

editing.

• Press and hold to lock/unlock the

keypad in standby mode.

g

• Press and hold to enter a pause when

making a call.

• Switch to upper/lower case during

editing.

h

• Mute or unmute the microphone.

• Access to the answer machine menu in

standby mode (for XL495 only).

• Listen to new messages from the

answering machine (for XL495 only).

i Microphone

j

Activate/deactivate audio boost in earpiece

or handsfree mode.

k

• Turn the speaker phone on/off.

• Make and receive calls through the

speaker.

l

• Press and hold to make an intercom

call (for multi-handset version only).

• Change the dial mode (from pulse

mode to temporary tone mode).

m

• Scroll down on the menu.

• Decrease the earpiece/speaker volume.

• Access the call log in standby mode.

n

• Make and receive calls.

• Recall key (This function is network

dependent.)

7EN

o

• Access the main menu in standby

mode.

• Conrm selection.

• Enter the options menu.

• Select the function displayed on the

handset screen directly above the key.

p LED indicator

View events or charging status.

q Loudspeaker

r Battery door

Overview of the base station

XL490

a

• Press to nd handsets.

• Press and hold to enter the registration

mode.

XL495

a

• Press to nd handsets.

• Press and hold to enter the registration

mode.

b Speaker

a

c

d

b

a

e

f

g

c

Turn the answering machine on or off.

d

• Delete the current playback message.

• Press and hold to delete all old

messages.

e /

Decrease/increase the speaker volume.

f /

Skip backward/forward during playback.

g

• Play messages.

• Stop messages playback.

8 EN

3 Get started

Caution

• Make sure that you have read the safety instructions in

the 'Important safety instructions' section before you

connect and install your handset.

Connect the base station

Warning

• Risk of product damage! Ensure that the power supply

voltage corresponds to the voltage printed on the back

or the underside of the phone.

• Use only the supplied power adapter to charge the

batteries.

Note

• If you subscribe to the digital subscriber line (DSL) high

speed internet service through your telephone line,

ensure you install a DSL lter between the telephone

line cord and the power socket. The lter prevents

noise and caller ID problems caused by the DSL

interference. For more information on the DSL lters,

contact your DSL service provider.

• The type plate is located on the bottom of the base

station.

1 Connect each end of the power adapter

to:

• the DC input jack at the bottom of the

base station;

• the power socket on the wall.

2 Connect each end of the line cord to:

• the telephone socket at the bottom of

the base station;

• the telephone socket on the wall.

3 Connect each end of the power adapter

to (for multi handset version only):

• the DC input jack at the bottom of the

extra handset charger.

• the power socket on the wall.

Install the handset

The batteries are pre-installed in the handset.

Pull the battery tape off from the battery door

before charging.

9EN

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

• Use only the supplied batteries.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

Note

• Charge the batteries for 8 hours before rst use.

• If the handset becomes warm when the batteries are

charging, it is normal.

Warning

• Check the battery polarity when inserting in the

battery compartment. Incorrect polarity may damage

the product.

Congure your phone

(country dependent)

1 When using your phone for the rst time,

you see a welcome message.

2 Press [OK].

Set the country/language

Select your country/language, then press [OK]

to conrm.

» The country/language setting is saved.

Note

• The country/language setting option is country

dependent. If no welcome message is displayed, it

means the country/language setting is preset for your

country. Then you can set the date and time.

To re-set the language, see the following steps.

1 Select [Menu] > [Phone setup] >

[Language], then press [OK] to conrm.

2 Select a language, then press [OK] to

conrm.

» The setting is saved.

Set the date and time

1 Select [Menu] > [Phone setup] > [Date &

time], then press [OK] to conrm.

2 Press the numeric buttons to enter the

date, then press [OK] to conrm.

» The time setting menu is displayed on

the handset.

3 Press the numeric buttons to enter the

time.

• If the time is in 12-hour format, press

/ to select [am] or [pm]

(Country dependent).

4 Press [OK] to conrm.

Change the remote access

PIN code (for XL495)

Note

• This feature is available only for models with answering

machine.

• The default answering machine remote access PIN

code is 0000 and it is important to change it to ensure

the security.

1 Select [Menu] > [Answ. Machine] >

[Remote access] > [Change PIN], then

press [OK] to conrm.

10 EN

2 Enter the old PIN, then press [OK] to

conrm.

3 Enter the new PIN code, then press [OK]

to conrm.

4 Enter the new PIN code again, then press

[Save] to conrm.

» The setting is saved.

Charge the handset

Place the handset on the base station to

charge the handset. When the handset is

placed correctly on the base station, you hear a

docking sound.

» The handset starts charging.

Note

• Charge the batteries for 8 hours before rst use.

• If the handset becomes warm when the batteries are

being charged, it is normal.

You can activate or deactivate the docking tone

(see 'Set the docking tone' on page 25).

Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery

level.

When the handset is off the

base station, the bars indicate the

battery level (full, medium and

low).

When the handset is on the base

station/charger, the bars ash until

charging is complete.

The empty battery icon ashes.

The battery is low and needs

recharging.

The handset turns off if the batteries are empty.

If you are on the phone, you hear warning

tones when the batteries are almost empty. The

call gets disconnected after the warning.

What is standby mode?

Your phone is in standby mode when it is idle.

The handset name, date and time, and handset

number are displayed on the standby screen.

Display icons

In standby mode, the icons shown on the main

screen tell you what features are available on

your handset.

Icon Descriptions

When the handset is off the base

station/charger, the bars indicate the

battery level (from full to low).

When the handset is on the base

station/charger, the bars keep scrolling

until charging is complete.

The empty battery icon ashes and

you hear an alert tone.

The battery is low and needs

recharging.

It shows the connection status

between the handset and base station.

The more bars are shown, the better

the signal strength is.

11EN

It remains steadily on when browsing

incoming calls in the call log.

It remains steadily on when browsing

outgoing calls in the redial list.

It ashes when there is a new missed

call or when browsing unread missed

calls in call log.

It remains steadily on when browsing

the read missed calls in call log.

It remains steadily on when browsing

blocked calls in call log.

It ashes when receiving incoming call.

It remains steadily on when you are

in a call.

The speaker is on.

The ringer is off.

The silent mode is set and within

active period

(the phone does not ring).

Answering machine (XL495 only):

it ashes when there is a new

message or when the memory is full.

It is displayed when the telephone

answering machine is turned on.

It ashes when there is a new voice

message.

It remains steadily on when the voice

messages are already viewed in the

call log.

The icon is not shown when there is

no voice message.

The silent mode is set, but is outside

of active period.

The alarm is activated.

/

It is displayed when you adjust the

volume.

ECO The Eco mode is activated.

ECO+ The ECO+ mode is activated.

Check the signal strength

The number of bars indicates

the connection status between

the handset and base station. The

more bars are shown, the better

the connection is.

• Make sure the handset is connected to the

base station before you make or receive

calls and carry out the phone functions

and features.

• If you hear warning tones when you are

on the phone, the handset is almost out

of battery or the handset is out of range.

Charge the battery or move the handset

nearer to the base station.

Note

• When ECO+ is on, the signal strength is not displayed.

Switch the handset on or off

Press and hold to switch the handset on or

off.

12 EN

4 Calls

Note

• When the power fails, the phone cannot access

emergency services.

Tip

• Check the signal strength before you make a call or

when you are in a call (see 'Check the signal strength'

on page 11).

Make a call

You can make a call in these ways:

• Normal call.

• Predial call.

• Call through the direct keys

You can also make a call from the redial list (see

'Redial a call' on page 23), phonebook list (see

'Call from the phonebook' on page 19) and call

log (see 'Return a call' on page 21).

Normal call

1 Press or .

2 Dial the phone number.

» The number is dialed out.

» The duration of your current call is

displayed.

Predial call

1 Dial the phone number

• To erase a digit, press [Clear].

• To enter a pause, press and hold .

2 Press or to dial out the call.

Call through the direct key

You can make a quick call from the record pre-

saved in the direct key in the following ways:

• Press m1, m2 or m3 in standby mode, then

press or to dial out the number.

• Press or to get the dial tone rst.

Then press m1, m2 or m3 to display the

record content. Then press [OK] to dial

out the number.

Tip

• For information of how to set the direct keys, see the

chapter 'Phonebook', section 'Direct keys'.

Note

• The talk time of your current call is displayed on the

call timer.

• If you hear warning tones, the phone is almost out of

battery or out of range. Charge the battery or move

the phone close to the base station.

Answer a call

When the phone rings, you can select from the

following options:

• press or to answer the call.

• pick up the phone from the base station

(or from the charger) to answer the call

when you have activated the auto answer

feature (see 'Auto answer' on page 26).

Warning

• When the handset rings or when the handsfree is

activated, keep the handset away from your ear to

avoid ear damage.

Note

• The caller ID service is available if you have registered

to the caller ID service with your service provider.

13EN

Tip

• When there is a missed call, a notication message is

displayed.

• Select [Silent] to turn off the ringer of the current

incoming call.

End a call

You can end a call in these ways:

• Press ;

• Place the handset to the base station

or charging cradle.

Adjust the earpiece/speaker

volume

Press / to adjust the volume during

a call.

» The earpiece/speaker volume is

adjusted and the phone is back to the

call screen.

Mute the microphone

1 Press during a call.

» [Mute on] is displayed on the handset.

» The caller cannot hear you, but you

can still hear his voice.

2 Press again to unmute the microphone.

» You can now communicate with the

caller.

Turn the speaker on or off

Press .

Make a second call

Note

• This service is network dependent.

1 Press during a call.

» The rst call is put on hold.

2 Dial the second number.

» The number displayed on the screen is

dialed out.

Answer a second call

Note

• This service is network dependent.

When there is a periodical beep to notify you

of an incoming call, you can answer the call in

these ways:

1 Press and to answer the call.

» The rst call is put on hold, and you

are now connected to the second call.

2 Press and to end the current call and

answer the rst call.

Switch between two calls

Note

• This service is network dependent.

You can switch your calls in these ways:

• Press and ; or

• Press [Option] and select [Switch calls],

then press [OK] again to conrm.

» The current call is put on hold, and you

are now connected to the other call.

14 EN

Make a conference call with

the external callers

Note

• This service is network dependent. Check with the

service provider for additional charges.

When you are connected to two calls, you can

make a conference call in these ways:

• Press , then ; or

• Press [Option], select [Conference] and

then press [OK] again to conrm.

» The two calls are combined and a

conference call is established.

15EN

5 Intercom and

conference calls

Note

• This feature is available for multi- handset versions only.

An intercom call is a call to another handset

that shares the same base station. A conference

call involves a conversation between you,

another handset user and the outside callers.

Make a call to another

handset

Note

• If the base station only has 2 registered handsets, press

and hold to make a call to another handset.

1 Press and hold .

» For multi-handset versions, the

handsets available for intercom are

displayed, then go to step 2.

» For two-handset versions, the other

handset rings, then go to step 3.

2 Select a handset, then press [OK] to

conrm.

» The selected handset rings.

3 Press on the selected handset.

» The intercom is established.

4 Press to end the intercom call.

While you are on the phone

You can go from one handset to another during

a call:

1 Press and hold .

» The current caller is put on hold.

» For multi-handset versions, the

handsets available for intercom are

displayed, then go to step 2.

2 Select a handset, then press [OK] to

conrm.

» Wait for the other side to answer your

call.

Switch between calls

Press and hold to switch between the outside

call and the intercom call.

Make a conference call

A 3-way conference call is between you,

another handset user and the outside callers. It

requires two handsets to share the same base

station.

During an external call

1 Press and hold to initiate an internal call.

» The external caller is put on hold.

» For multi-handset versions, the

handsets available for intercom are

displayed, then go to step 2.

» For two-handset versions, the other

handset rings, then go to step 3.

2 Select a handset, then press [OK] to

conrm.

» The selected handset rings.

3 Press on the selected handset.

» The intercom is established.

4 Press [Conf].

» You are now in a 3-way conference

call with an external call and a selected

handset.

5 Press to end the conference call and

transfer the existing call to the selected

handset.

16 EN

Note

• Press to join an ongoing conference with another

handset if [Services] > [Conference] is set to [Auto].

During the conference call

1 Press [Int.] to put the external call on hold

and go back to the internal call.

» The external call is put on hold.

2 Press [Conf] to establish the conference

call again.

Note

• If a handset hangs up during the conference call, the

other handset remains connected to the external call.

17EN

6 Text and

numbers

You can enter text and numbers for handset

name, phonebook records, and other menu

items.

Enter text and numbers

1 Press once or several times on the

alphanumeric key to enter the selected

character.

2 Press [Clear] to delete a character. Press

and hold [Clear] to delete all characters.

Press and to move the cursor

left and right.

3 Press to add a space.

Note

• For information on key mapping of characters and

numbers, see the chapter 'Appendix'.

Switch between uppercase

and lowercase

By default, the rst letter of each word in a

sentence is uppercase and the rest is lowercase.

Press and hold to switch between the

uppercase and lowercase letters.

18 EN

7 Phonebook

This phone has a phonebook that stores up to

50 records. Each record can have a name up to

16 characters long. Each record can store up to

2 numbers, with each number up to 24 digits

long.

Direct keys

The phone also features 3 direct keys to store

the emergency phone numbers or numbers

you call frequently.

Set the direct keys

1 Enter the number.

2 Press and hold m1, m2 or m3.

3 Enter/edit the name, then press [OK] to

conrm.

4 Enter/edit the number, then press [Save] to

conrm.

» The direct key is set.

Note

• If there is already a record saved in the direct key, you

need to conrm whether you want to replace the old

record with the new one.

• The phonebook records and the direct key records are

saved in the base station. For multiple handset versions,

the same phonebook records and direct key records

are shared among different handsets.

Direct access memories

You have up to 2 direct access memories (Keys

1 and 2). Depending on your country, keys 1

and 2 are preset to the voice mail number and

information service number of your service

provider respectively. When you press and hold

on the key in standby mode, the saved phone

number is dialed automatically.

Note

• The availability of direct access memory is country

dependent.

View the phonebook

Note

• You can view the phonebook on one handset only

each time.

1 Press or select [Menu] >

[Phonebook] > [View] > [OK] to access

the phonebook list.

2 Select a contact and view the available

information.

Search a record

You can search the phonebook records in these

ways:

• Scroll the contacts list.

• Enter the rst character of the contact

name.

Scroll the contact list

1 Press or select [Menu] >

[Phonebook] > [View] > [OK] to access

the phonebook list.

2 Press and to scroll through the

phonebook list.

Enter the rst character of a contact

1 Press or select [Menu] >

[Phonebook] > [View] > [OK] to access

the phonebook list.

La pagina sta caricando ...

Philips XL4951DS/38 Manuale utente

Philips XL4951DS/38 Manuale utente

in altre lingue

Documenti correlati

Altri documenti