Sames KM. 3 Ex Manuale utente

Marca: Sames

Modello: KM. 3 Ex

Categoria: Spruzzatore di vernice

Tipo: Manuale utente

DOCUMENTATION

MANUAL ELECTROSTATIC GUN

KM.3 Ex

Manual : 582.050.110-UK - 1904

Date: 16/04/19

Supersede : 01/06/18

Modif.:

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : Before assembly and start-up, please read and clearly understand all the documents relating to

this equipment (professional use only).

THE PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE..

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN N° : 578.015.130-1904

578.015.130 1904

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

FR UK DE

Pour une utilisation sure, Il est de votre

responsabilité de :

 Lire attentivement tous les documents contenus

dans le CD joint avant la mise en service de

l’équipement,

 D’installer, d’utiliser, d’entretenir et de réparer

l’équipement conformément aux préconisations de

SAMES KREMLIN ainsi qu’aux réglementations

nationales et/ou locales,

 Vous assurez que les utilisateurs de cet

équipement ont été formés, ont parfaitement compris

les règles de sécurité et qu’ils les appliquent.

To ensure safe use of the machinery, it is your

responsibility to:

 Carefully read all documents contained on the

enclosed CD before putting the machinery into service,

 Install, use, maintain and repair the machinery in

accordance with SAMES KREMLIN's

recommendations and national and/or local

regulations,

 Make sure that the users of the machinery have

received proper training and that they have perfectly

understood the safety rules and apply them.

Eine sichere Nutzung setzt voraus, dass Sie: :

 alle in der CD enthaltenen Dokumente vor der

Inbetriebnahme der Anlage aufmerksam lesen,

 die Anlage im Einklang mit den Empfehlungen von

SAMES KREMLIN sowie mit den nationalen und/oder

lokalen Bestimmungen installieren, verwenden,

warten und reparieren,

 sich vergewissern, dass die Nutzer dieser Anlage

angemessen geschult wurden, die

Sicherheitsbestimmungen verstanden haben und sie

anwenden.

ES IT PT

Para una utilización segura, será de su

responsabilidad:

 leer atentamente todos los documentos que se

incluyen en el CD adjunto antes de la puesta en

servicio del equipo,

 instalar, utilizar, efectuar el mantenimiento y

reparar el equipo con arreglo a las recomendaciones

de SAMES KREMLIN y a la normativa nacional y/o

local,

 cerciorarse de que los usuarios de este equipo han

recibido la formación necesaria, han entendido

perfectamente las normas de seguridad y las aplican.

Per un uso sicuro, vi invitiamo a:

 leggere attentamente tutta la documentazione

contenuta nel CD allegato prima della messa in

funzione dell'apparecchio,

 installare, utilizzare, mantenere e riparare

l'apparecchio rispettando le raccomandazioni di

SAMES KREMLIN, nonché le normative nazionali e/o

locali,

 accertarvi che gli utilizzatori dell'apparecchio

abbiano ricevuto adeguata formazione, abbiano

perfettamente compreso le regole di sicurezza e le

applichino.

Para uma utilização segura, é da sua

responsabilidade:

 Ler atentamente todos os documentos incluídos

no CD em anexo antes de pör o equipamento em

funcionamento,

 Proceder à instalação, utilização, manutenção e

reparação do equipamento de acordo com as

preconizações de SAMES KREMLIN, bem como com

outros regulamentos nacionais e/ou locais aplicáveis,

 Assegurar-se que os utilizadores do equipamento

foram devidamente capacitados, compreenderam

perfeitamente e aplicam as devidas regras de

segurança.

NL SE FI

Voor een veilig gebruik dient u:

 alle document op de bijgevoegde cd aandachtig te

lezen alvorens het apparaat in werking te stellen,

 het apparaat te installeren, gebruiken,

onderhouden en repareren volgens de door SAMES

KREMLIN gegeven aanbevelingen en overeenkomstig

de nationale en/of plaatselijke reglementeringen,

 zeker te stellen dat de gebruikers van dit apparaat

zijn opgeleid, de veiligheidsregels perfect hebben

begrepen en dat zij die ook toepassen.

För en säker användning av utrustningen ansvarar ni

för följande:

 Läs noga samtliga dokument som finns på den

medföljande cd-skivan innan utrustningen tas i drift.

 Installera, använd, underhåll och reparera

utrustningen enligt anvisningarna från SAMES

KREMLIN och enligt nationella och/eller lokala

bestämmelser.

 Försäkra er om att användare av denna utrustning

erhållit utbildning, till fullo förstått

säkerhetsföreskrifterna och tillämpar dem.

Käytön turvallisuuden varmistamiseksi

velvollisuutesi on:

 Lukea huolella kaikki CD:llä olevat asiakirjat ennen

laitteiston käyttöönottoa,

 Noudattaa laitteiston asennuksessa, käytössä,

kunnossapidossa ja huollossa SAMES KREMLIN in

suosituksia sekä kansallisia ja/tai paikallisia

määräyksiä,

 Varmistaa, että laitteiston käyttäjät ovat

koulutettuja ja ymmärtävät täysin

turvallisuusmääräykset ja miten niitä sovelletaan.

PL CS SL

Dla zapewnienia bezpiecznego użytkowania na

użytkowniku spoczywa obowiązek:

 Uważnego zapoznania się ze wszystkimi

dokumentami znajdującymi się na załączonej płycie CD

przed pierwszym uruchomieniem urządzenia,

 Instalowania, użytkowania, konserwacji i naprawy

urządzenia zgodnie z zaleceniami firmy SAMES

KREMLIN oraz z przepisami miejscowymi,

 Upewnienia, że wszyscy przeszkoleni użytkownicy

urządzenia zrozumieli zasady bezpieczeństwa i stosują

się do nich.

Pro bezpečné používání jste povinni:

 Před uvedením zařízení do provozu si pozorně

přečíst veškeré dokumenty obsažené na přiloženém

CD,

 Nainstalovat, používat, udržovat a opravovat

zařízení v souladu s pokyny firmy SAMES KREMLIN

a s národními a/nebo místními legislativními předpisy,

 Ujistit se, že uživatelé tohoto zařízení byli

vyškoleni, že dokonale pochopili bezpečnostní pravidla

a že je dodržují.

Za varno uporabo ste dolžni:

 natančno prebrati vse dokumente na CD pred

zagonom stroja,

 inštalirati, uporabljati, vzdrževati in popravljati

opremo po določilih SAMES KREMLIN in v skladu z

veljavnimi nacionalnimi in/ali lokalnimi predpisi,

 poskrbeti, da so uporabniki te opreme ustrezno

usposobljeni, poznajo varnostne predpise in da jih

upoštevajo.

SK HU RO

V záujme bezpečného je vašou povinnosťou:

 pozorne si prečítať všetky dokumenty obsiahnuté

na priloženom CD predtým, ako zariadenie uvediete do

prevádzky,

 nainštalovať, používať, udržiavať a opravovať

zariadenie v súlade s odporúčaniami spoločnosti

SAMES KREMLIN a národnými a/alebo miestnymi

predpismi,

 uistiť sa, že používatelia tohto zariadenia boli

zaškolení, riadne porozumeli pravidlám bezpečnosti a

používajú ich.

A biztonságos használat érdekében az Ön

felelőssége, hogy:

 a berendezés üzembe helyezése előtt figyelmesen

elolvassa a mellékelt CD által tartalmazott összes

dokumentumot,

 a berendezést a SAMES KREMLIN ajánlasainak

valamint a nemzeti és/vagy helyi szabályozásoknak

megfelelően helyezze üzembe, használja, tartsa

karban és javítsa,

 megbizonyosodjon róla, hogy a berendezés

felhasználói képzettek, tökéletesen megértették és

alkalmazzák a biztonsági előírásokat.

Pentru o utilizare sigură, este responsabilitatea dvs.

să:

 Citiţi cu atenţie toate documentele de pe CD-ul

anexat, înainte de punerea în funcţiune a

echipamentului,

 Instalaţi, utilizaţi, întreţineţi şi reparaţi

echipamentul conform instrucţiunilor SAMES

KREMLIN precum şi reglementărilor naţionale şi/sau

locale,

 Vă asiguraţi că utilizatorii acestui echipament au

fost instruiţi, au înţeles perfect regulile de securitate şi

le aplică integral.

Déclaration(s) de conformité au verso de ce document / Declaration(s) of conformity at the back of this document / Konformitätserklärung(en) auf der Rückseite dieser Unterlage

/ Declaración (es) de conformidad en el reverso de este documento / Dichiarazione/i di conformità sul retro del presente documento

/ Declaração(ções) de conformidade no verso do documento / Conformiteitsverklaring(en) op de keerzijde van dit document / Försäkran om överensstämmelse på omstående

sida av detta dokument / Vaatimustenmukaisuusvakuutukset tämän asiakirjan kääntöpuolella / Deklaracja(e) zgodności na odwrocie dokumentu

/ Prohlášení o shodě se nachází/nacházejí na zadní straně tohoto dokumentu / Deklaracija(e) o skladnosti na hrbtni strani tega dokumenta / Vyhlásenie/-a o zhode sa nachádzajú

na zadnej strane dokumentu / A dokumentum hátlapján szereplő megfelelőségi nyilatkoz(ok) / Declaraţii de conformitate pe versoul acestui document

SAMES KREMLIN - 2 - N° : 578.015.130-1904

DECLARATION UE DE CONFORMITE

EU DECLARATION OF CONFORMITY

EU- KONFORMITÄTSERKLÄRUNG

DECLARACIÓN UE DE CONFORMIDAD

DICHIARAZIONE DI CONFORMITÀ UE

DECLARAÇÃO UE DE CONFORMIDADE

EU-CONFORMITEITSVERKLARING

EU-FÖRSÄKRAN OM ÖVERENSSTÄMMELSE

EU- VAATIMUKSENMUKAISUUSVAKUUTUS

DEKLARACJA ZGODNOŚCI UE

EU PROHLÁŠENÍ O SHODĚ

IZJAVA EU O SKLADNOSTI

VYHLÁSENIE O ZHODE

EU-MEGFELELŐSÉGI NYILATKOZAT

DECLARAŢIA DE CONFORMITATE UE

Le fabricant / The manufacturer / Der Hersteller

/ El fabricante / Il produttore / O fabricante

/ De fabrikant / Tillverkare / Valmistaja / Producent / Výrobce

/ Proizvajalec / Výrobca / Gyártó / Fabricantul:

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - FRANCE

Tél. : 33 (0)4 76 41 60 60

Déclare que le matériel désigné ci-après / Herewith declares that the equipment / erklärt hiermit, dass die / Declara que el material designado a

continuación / Dichiara che il materiale sottoindicato / Declara que o material a seguir designado / verklaart dat de hieronder aangeduide apparatuur

/ Kungör att den utrustning som anges här nedan / ilmoittaa, että alla mainitut laitteistot / Oświadcza, że wymienione poniżej urządzenia / Prohlašuje,

že níže uvedené vybavení / Izjavlja, da je opisana oprema spodaj / Vyhlasuje, že zariadenie uvedené nižšie / Kijelenti, hogy a megjelölt anyag a

továbbiakban / Declară că echipamentul precizat mai jos:

PISTOLET MANUEL DE PULVERISATION ELECTROSTATIQUE / MANUAL ELECTROSTATIC SPRAYING GUN

ELEKTROSTATISCHE HANDSPRITZPISTOLE / PISTOLA MANUAL DE PULVERIZACIÓN ELECTROSTÁTICA

KM* 3 Ex

Est conforme à la législation d’harmonisation de l’Union applicable suivante / Is in conformity with the relevant Union harmonisation legislation / Erfüllt

die einschlägigen Harmonisierungsrechtsvorschriften der Union / es conforme con la legislación de armonización pertinente de la Unión / è conforme

alla pertinente normativa di armonizzazione dell’Unione / in overeenstemming met de desbetteffende harmonisatiewetgeving van de Unie / med den

relevanta harmoniserade unionslagstiftningen / on asiaa koskevan unionin yhdenmukaistamislainsäädännön vaatimusten mukainen / jest zgodny z

odnośnymi wymaganiami unijnego prawodawstwa harmonizacyjnego / Shoduje se s následující příslušnou evropskou harmonizační legislativou

/ V skladu s harmonizirano zakonodajo Unije / Je v súlade s uplatniteľnými harmonizačnými právnymi predpismi EÚ / Megfelel a következő

alkalmazandó uniós harmonizációs szabályozásnak / Este conform cu legislaţia aplicabilă de armonizare de mai jos

Directive ATEX / ATEX Directive / ATEX Richtlinie / Directiva ATEX / Direttiva ATEX / Diretiva ATEX

/ ATEX-Richtijn / ATEX-direktivet / ATEX-direktivi / Dyrektywa ATEX / Směrnice ATEX / Direktiva ATEX / Smernica ATEX

/ ATEX-irányelv

2014/34/UE

II 2G EEx 0,24 mJ

EN 50050:2000

EN 50014+ A1 + A2:1997

EN 50019 :2000

EN 50028:1987

Attestation d’examen CE de type / EC certificate examination, INERIS 03 ATEX 0026 X

Notifiée par / Notified by : INERIS 0080 - 60550 Verneuil-en-Halatte - France

"Les normes utilisées ne sont plus celles qui sont harmonisées, mais la conformité du matériel n'est pas impactée par les

modifications substantielles des normes de la série EN 60079 et EN 50050." / 'The standards used are no longer the

harmonized ones, but the conformity of the equipment is not affected by the substantial modifcations of the EN 60079 and EN

50050 serie standards'.

Notification Assurance Qualité de Production / Production Quality Assurance Notification INERIS 03 ATEX Q721

Notifiée par / Notified by : INERIS 0080 - 60550 Verneuil-en-Halatte - France

SAMES KREMLIN - 3 - N° : 578.015.130-1904

La présente déclaration de conformité est établie sous la seule responsabilité du fabricant / This declaration of conformity is issued under the sole

responsibility of the manufacturer / Die alleinige Verantwortung für die Ausstellung dieser Konformitätserklärung trägt der Hersteller / La presente

declaración de conformidad se expide bajo la exclusiva responsabilidad del fabricante / La presente dichiarazione di conformità è rilasciata sotto la

responsabilità esclusiva del fabbricante / A presente declaração de conformidade é emitida sob a exclusiva responsabilidade do fabricante / Deze

conformiteitsverklaring wordt verstrekt onder volledige verantwoordelijkheid van de fabrikant / Denna försäkran om överensstämmelse utfärdas på

tillverkarens eget ansvar / Tämä vaatimustenmukaisuusvakuutus on annettu valmistajan yksinomaisella vastuulla / Niniejsza deklaracja zgodności

wydana zostaje na wyłączną odpowiedzianość producenta / Toto prohláŝení o skodě se vydává na výhradní odpovědnost výrobce / Za izdajo te izjave

o skladnosti je odgovoren izključno proizvajalec / Toto vyhlásenie o zhode sa vydáva / na vlastnú zodpovednosť výrobcu / Ezt a megfelelőségi

nylatkozatot a gyártó kizárólagos felelőssége mellett adják ti / Prezenta declaraţie de conformitate este emisă pe răspunderea exclusivă a

producătorului.

Hervé WALTER

Directeur Innovation & Développement / Innovation & Development

Director / Direktor für Innovation & Entwicklung / Director de Inovación

y Desarrollo / Direttore Innovazione e sviluppo

/ Diretor de Inovação / Manager Innovatie en Ontwikkeling / Direktör för

Forskning och Utveckling / Innovaatio- ja kehitysjohtaja

/ Dyrektor ds. Innowacji I Rozwoju / Ředitel pro inovace a vývoj

/ Direktor za inovacije in razvoj / Riaditeľ pre inováciu a rozvoj

/ Innovációs és fejlesztési igazgató / Director Inovaţie şi Dezvoltare

Fait à Meylan, le / Established in Meylan, on / Geschehen zu Meylan, am / En Meylan, a / Redatto a Meylan, / Vastgesteld te Meylan, / Utformat i

Meylan, den / Meylan, Ranska, / Sporządzono w Meylan, dnia / Meylan, dnia / V Meylanu, / V Meylan dňa / Kelt Meylanban, / Întocmită la Meylan, pe

data de 12/04/2019 - 04/12/2019

INSTRUCTION MANUAL

MANUAL ELECTROSTATIC GUN

SERIE KM.3 Ex

Manual : 1805 573.149.112

Date : 25/05/18 - Supersede : 24/05/16

Modif : Update + Pages 7 and 8

TRANSLATION FROM THE ORIGINAL MANUAL

IMPORTANT : before assembly and start-up, please read and clearly understand all documents relat-

ing to this equipment (professional use only).

PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR

NOTICE.

SAMES KREMLIN SAS

13, chemin de Malacher

38 240 - MEYLAN - France



: 33 (0)4 76 41 60 60

www.sames-kremlin.com

SAMES KREMLIN Page 1 Manual : 573.149.112

INSTRUCTION MANUAL

MANUAL ELECTROSTATIC GUN

SERIE KM.3 Ex

TABLE OF CONTENTS

1. GENERAL SAFETY INSTRUCTIONS .......................................................................................................2

2. OPERATING PRINCIPLE...........................................................................................................................4

3. SPECIFICATIONS......................................................................................................................................5

4. INSTALLATION..........................................................................................................................................9

5. STARTING UP..........................................................................................................................................10

6. DAILY CARE AND CLEANING................................................................................................................12

7. TROUBLESHOOTING AND ELECTRICAL TESTS................................................................................14

8. MAINTENANCE........................................................................................................................................17

ADDITIONAL DOCUMENTATIONS :

UE Declaration of Conformity 578.015.130

Parts Identification List

Electrostatic guns : specific spare parts 573.163.050

KMP 3 Ex manual electrostatic gun 573.164.050

KMV 3 Ex manual electrostatic gun 573.165.050

KMC 3 Ex manual electrostatic gun 573.166.050

KMX 3 Ex manual electrostatic gun 573.167.050

SAMES KREMLIN Page 2 Manual : 573.149.112

Dear Customer,

We would like to take this opportunity to thank you for buying a new manual electrostatic gun.

We are confident that you have made the right choice.

We have taken every care, from original design to final manufacture, to ensure that this product

gives you complete satisfaction.

To obtain the best performance and reliability from this equipment, we would strongly advise you

to read this instruction manual attentively before attempting to use the equipment.

1. GENERAL SAFETY INSTRUCTIONS

1 - The non-compliance with the safety requirements and precautions stated in this manual

could result in unsafe conditions.

2 - The personnel involved in operating and servicing the electrostatic coating equipment must be fully

aware of all the safety requirements stated in this manual.

3 - The workshop supervisor must be certain that the personnel has perfectly understood the safety

instructions and complies with them. These instructions cover the precautions required for solvent-

based paint spraying and the specific precautions in connection with the use of equipment requiring

high voltage.

The electrostatic coating system shall be used by qualified personnel only. The personnel must also

be familiar with the local safety standards which can be in force in certain coutries.

WARNING : failure to observe the safety precautions contained herein could result in

operating troubles and create unsafe conditions (body injury, explosion fire or electric

shock).

INSTALLATION

The EN 50 053 standard covers the select, installation and use requirements of the

electrostatic projection equipments for ignitible materials.

The part 1 of that standard covers the paint electrostatic projection manual guns.

The KM.3 Ex gun is a gun designed only for the application of paints and varnishes.

4 - Spraying, cleaning and servicing must be made in a ventilated area so that solvent vapours are

properly drained.

5 - STD 9 power supply unit must be installed in a non-hazardous area. Moreover, it must be

located 4 meters (13 ft) at least away from any flammable vapour emissions.

Ground the earth terminal.

6 - All metallic parts located within 3 meters (10 ft) around the gun (such as pumps, drums, conveyor,

etc…) must be correctly grounded.

7 - Storage of paint and solvent drums near or inside the spraying area is prohibited. Keep all fluid

containers properly closed in a non-hazardous area.

Use cleaning solvents with the highest flash point - If possible, higher than the ambiant

temperature.

8 - Remove the useless parts from the spraying area and keep this area clean. Part holders and

conveyor hooks must be removed and frequently cleaned.

9 - The floor must be electrically conductive and grounded. Maximum resistivity of the floor : 1 Mas

per EN 50 053-7-2.

10 - The warning sign must be affixed in the spraying area and located where it can be easily seen and

read by all operators.

SAMES KREMLIN Page 3 Manual : 573.149.112

SPRAYING

11 - Never point the spray gun to anyone or at any part of the body.

12 - Never throw or drop the electrostatic manual gun. Any misuse of the spray gun equipment or

accessories can damage them and result in serious body injury, fire or explosion.

13 - The parts to be painted must be properly grounded. Any incorrect electrical continuity might result in

stock hazard.

14 - Never operate the electrostatic spray gun if air leaks are detected on the gun. Never use air hoses

on which air leaks can occur.

15 - Be sure that tip and air cap are in position and hand tightened with the retaining ring onto the gun

before turning on the power supply.

16 - Verify that any person entering the spray area is correctly grounded with conductive sole shoes (in

accordance with EN 50 053 standard).

The operator must not wear gloves which insulate the hand from the conductive gun handle. If using

gloves, check that they are conductive (in accordance with EN 50 053) or that a square has been

cut-out in the glove palm.

SERVICING

17 - After any servicing or cleaning, never switch on the power supply tip and air cap are in position and

secured with the retaining ring onto the gun.

18 - Never immerse the gun or plastic parts of the gun in solvent.

This could seriously damage the gun and cause fire, explosion or body injury. To clean the gun use

soft cloth or bristle brush with a moderate amount of non-conductive solvent, wipe the front of the

gun at fluid nozzle with the gun pointed down to prevent from flowing back into the air passages.

19 - Before disconnecting the hoses, check that they are no more under pressure and that the power

supply is off.

20 - The personnel involved in the electrostatic coating system servicing must be trained and qualified. If

you face any trouble which cannot be repaired, do not try to start up the equipment. Consult

immediately your local authorized SAMES KREMLIN distributor for assistance.

SAMES KREMLIN Page 4 Manual : 573.149.112

2. OPERATING PRINCIPLE

STD 9 power supply unit KM.3 Ex gun

An electrostatic coating system consists of an electrostatic manual gun, a power supply unit, connecting

air hoses and low voltage electrical link cable.

STD 9 POWER SUPPLY

The STD 9 power supply transfoms the network voltage into an adjustable continuous low voltage by

means of an electronic system.

An electronic regulator built into the power supply unit automatically reduces the intensity and

voltage when the electrode on the spray gun is close to a grounded object (less than 100 mm or 4

inches) thereby preventing any electric discharge.

The power supply unit includes a 3-pin plug and cable assembly so as guarantee a safe

grounded AC input power system. Failure to ground the power supply may result in an

electrical shock hazard.

Interconnect the STD 9 power supply unit with the air pressure network (maximum pressure 6 bar /

87 psi). The STD 9 power supply incorporates a flow switch to ensure gun safety.

FLOW SWITCH :

A flow switch is an electropneumatic device detecting any downstream air consumption so that the

power supply unit provides low voltage to the gun only when the atomizing air flows from the front of

the gun.

KM.3 Ex MANUAL ELECTROSTATIC GUN

The KM.3 Ex manual electrostatic gun is designed to negatively charge the material being sprayed,

so that it is drawn to the positively grounded conductive object being coated.

As a result of the electrostatic charge of the paint particules, a more efficient and uniform application

of the coating material is applied to the front but also on the sides, edges and back of the grounded

workpieces.

SAMES KREMLIN Page 5 Manual : 573.149.112

3. SPECIFICATIONS

COMMON FEATURES TO ALL KM.3 Ex MANUAL ELECTROSTATIC GUNS

The KM.3 Ex manual gun is supplied in a case with a

complete range of accessories, electric cable, a gun cover,

a detailed instruction manual and a warning sign.

Weight (without hoses) : 800 g.

Gun length : 285 mm / 11.2"

Electric specifications

Type ................................................... integrated generator

Operating voltage (electrode)............. 20 kV to 85 kV (negative)

Maximum current at the electrode ..... 100 µA.

Low voltage........................................ adjustable from 3 V to 12 Vdc (refer to STD 9 instruction

manual).

Low voltage display............................ by a red indicator LED on the STD 9

Electrostatic effect ON/OFF............... by an ON/OFF switch (on the back of the gun)

Maximum current consumption.......... 0,65 A at 12 V.

Low voltage cable length ................... 10 m / 32.8", 15 m / 49.2" or 30 m / 98.5"

Fluid specification

Fluid resistivity.................................... > 5 M(standard assembly with rigid tube)

from 0 to 5 Mor water-based materials

(remove the rigid tube and install instead of it a insulated

specific hose - length : 10 m / 32.8", 15 m / 49.2" or 30 m

/ 98.5" - refer to SPARE PARTS, Doc. 573.163.050)

0 M(water based paint) (¤ - refer to nota above)

Fluid connections ............................... M 1/2 " JIC

Air specifications

Maximum operating air pressure ...... 7 bar (100 psi)

Air inlet .............................................. M 1/4 NPS

Recommended air hose .................... antistatic hose 8 mm (5/16") diameter

Fan width adjustment ........................ by a knurled knob located on the left of the gun handle



Gun operating temperature range…. . From 0 to 40° C / from 32° to 104° F

(¤) Nota : When using non-flammable water-based paints, the paint equipment must be insulated in

a bubble.

The installation will consist of an insulating Iso Bubble II, a STD 9 B power supply, a KM 3 H2O

gun.

Please refer to the instruction manuals of the different equipments.

SAMES KREMLIN Page 6 Manual : 573.149.112

SPECIFIC FEATURES OF THE KM.3 EX GUNS

AIRMIX ®GUNS PNEUMATIC GUNS

KMX 3 EX KMC 3 EX KMP 3 EX KMV 3 EX

Gun assembly

with air cap

and nozzle

KX 16 air cap or

KVX 14 air cap

09/135 nozzle

KXC 5 air cap

K 30 nozzle

KP 3 air cap

Ø 1,2 nozzle

KMV air cap

Swirling fan nozzle

Fluid

specifications

Fan pattern Airmix® -

Adjustable flat

pattern

Airmix® - Round

hollow spray Pneumatic - Flat

pattern Pneumatic - round

patern

Maximum

viscosity 40 s CA 4

- For upper

viscosity, please

contact SAMES

KREMLIN

40 s CA 4

- For upper

viscosity, please

contact SAMES

KREMLIN

40 s CA 4

- For upper

viscosity, please

contact SAMES

KREMLIN

40 s CA 4

- For upper

viscosity, please

contact SAMES

KREMLIN

Maximum fluid

pressure 100 bar / 1450 psi 100 bar / 1450 psi 10 bar / 145 psi 10 bar / 145 psi

Fluid flow rate

and fan width Adjustable by air

flow rate variation

on the air cap

- Refer to AIRMIX®

nozzle chart

- Doc. 573.167.050.

Refer to AIRMIX®

nozzle chart

- Doc. 573.166.050.

Maxi 1 litre/minute

Fan width at 25 cm :

30 cm

Maxi 1 litre/minute

Fan width at 25 cm :

20 cm

Maximum fluid

temperature 60° C / 140°F 60° C / 140°F 60° C / 140°F 60° C / 140°F

Wetted parts Stainless steel -

Polyamide - PETP -

Nickel-plated brass

- PTFE elastomer -

Tungsten carbide -

Polyacetale

Stainless steel -

Polyamide - PETP -

Nickel-plated brass

- PTFE elastomer -

Tungsten carbide -

Polyacetale

Stainless steel -

Polyamide - PETP -

Nickel-plated brass

- PTFE elastomer -

Polyacetale -

Polyethylene

Stainless steel -

Polyamide - PETP -

Nickel-plated brass

- PTFE elastomer -

Polyacetale -

Polyethylene

Air

specification KX 16 air cap flow

rate:

8 Nm3/h.

KXC 5 air cap flow

rate:

8 Nm3/h.

KP 3 air cap flow

rate :

maxi 20 Nm3/h at 4

bar (58 psi)

KMV air cap flow

rate:

16 Nm3/h at 4 bar

(58 psi)

SAMES KREMLIN Page 7 Manual : 573.149.112

DESCRIPTION OF THE MARKING LABEL

KMX3 GUN KMC3 GUN

KMP3 GUN KMV3 GUN

SAMES KREMLIN Page 8 Manual : 573.149.112

COMMON MARKING TO GUNS DESCRIPTION

CE 0080 0080 : INERIS code which notified the Quality Management

System

SAMES KREMLIN

Stains FRANCE Name and address of the manufacturer

KMP3 Ex or KMV3 Ex or KMX3 Ex

or KMC3 Ex Gun version

PATENT PENDING Registered patent

INERIS 03 ATEX 0026X Material certificate N° given by INERIS

EEx 0.24mJ II 2 G EEx 0.24mJ : marking corresponding to the projection guns for

paints for the non-flammable paints or flock in association with

non-flammable adhesive vapours with an energy less than 0.25

mJ (En 50 050 standard).

:For use in explosive area

II : group II 2: class 2 G: gas

Surface equipment meant to be in an area where explosive

atmospheres due to gas, vapours, mists are liable to appear

from time to time in usual operating

P max : xxx bar / xxx psi Maximum fluid pressure (depending on gun version :

100 bar / 1450 psi for the KMX3 Ex and KMC3 Ex

10 bar / 145 psi for the KMP3 Ex and KMV3 Ex)

N° Serie / Serial Nb

(engraved under the front body near the

handle)

Number given by SAMES KREMLIN. The two first numbers

indicate the manufacturing year.

SAMES KREMLIN Page 9 Manual : 573.149.112

4. INSTALLATION



REFER TO GENERAL SAFETY INSTRUCTIONS

A safe electrostatic system installation requires compliance with all applicable safety standards and

requirements outlined in this manual. Any improper installation or misuse of the electrostatic coating

system can cause serious body injury, fire, explosion or electric shock hazard.

The European safety standard EN 50 053 covers installation and operation regulations of electrostatic

coating system.

Drawing of an installation for solvanted paint with a resistivity > 5 M

A Main air supply line

B Air and water separator

C Air supply shut off valve

D Air filter with air pressure regulator

E Atomizing air shut off valve

F Air pressure regulator (pump)

G Air supply shut off valve (pump)

H STD 9 power supply unit

I-R Connecting air lines

J KM.3 Ex electrostatic manual gun

K Low voltage cable

L Pump

M Fluid filter

N Fluid drain valve

O Connecting fluid line

P Three wire cable (230 V + ground) or (115

V + ground)

Q Warning sign

R Air supply hose of the power supply

The typical installation shown above is only a guide for selecting and installing an electrostatic coating

system. Other installations can be used (with diaphragm pump, circulating, heated coating system,

etc…).

SAMES KREMLIN Page 10 Manual : 573.149.112

COMPRESSED AIR SUPPLY CONNECTION

(Refer to the typical installation drawing)

Compressed air supply to the electrostatic coating system must be dry and clean. Dirt or moisture

can ruin the quality of your finished workpiece and can cause the gun to malfunction.

To reduce the risk of electric shock or other serious injury, use only SAMES KREMLIN electrically

conductive air hose (with green mark).

For correct operation of the electrostatic coating system, interconnect the air hose between the

outlet on the air filter/air pressure regulator (D) and the air inlet connection on the power supply (H).

Interconnect the air hose between the air outlet connection on the power supply (H) and the air inlet

connection on the electrostatic gun (J).

If necessary install an air line lubricator between the air pressure regulator (F) and the pump (L).

PRODUCT SUPPLY CONNECTION

(Refer to the typical installation drawing)

Before connecting the fluid line (O), check that the hose is suited to the pump working pressure.

Blow it out with air and flush it with solvent.

Never use damaged fluid hoses. Use only SAMES KREMLIN fluid hose designed for the resistivity

range of the fluid to be sprayed.

Connect the fluid fliter (M) onto the pump fluid outlet (L).

Connect the fluid drain valve (N) onto the fluid filter outlet (M).

Interconnect the fluid filter outlet (M) and the KM.Ex electrostatic gun (J) with a fluid hose (O).

VENTILATE THE SPRAY BOOTH

To prevent hazardous concentrations of toxic and/or flammable vapors, spray only in a correctly

ventilated spray booth.

Never operate the spray gun when the ventilation system is stopped.

High velocity air exhaust will decrease the operating efficiency of the electrostatic system. (Air

exhaust velocity of 30 meters (98.5 ft)/minute should be sufficient).

Nevertheless, before operating the electrostatic coating system, make sure that the air velocity of

the spray booth complies with the local regulations.

ELECTRICAL CHECKS

(Refer to the typical installation drawing)

Before connecting the power supply unit on the main power source, be sure is compatible with the

local voltage source (110 VAC or 220 VAC).

With a megohmmeter check the electrical grounding continuity between the ground connection of

the power supply (H) and the grounded AC input power source (real earth connection).

With a megohmmeter check the electrical grounding continuity between the conductive gun handle

and this grounded AC Input power source (real earth connection).

Do not attempt to by-pass or defeat the ground interconnections : it may result in an electric shock

hazard, fire or explosion.

5. STARTING UP



REFER TO GENERAL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

Before using the electrostatic coating system :

Check that the operators have fully understood the safety instructions stated in this manual.

The operators must not wear gloves which could insulate the hand from the conductive gun handle If

using gloves, check that they are conductive (in accordance with EN 50 053) or that a square has

been cut out in the glove palm.

SAMES KREMLIN Page 11 Manual : 573.149.112

Be sure that the personnel entering the spraying area has read and understood the safety

requirements stated in this manual and/or on the warning sign. Verify that any person entering the

spray area is correctly grounded with conductive sole shoes or personnal grounding straps.

Check that fans are in good operating condition.

Remove any useless parts from the spraying area and keep this area clean. Part holders and

conveyor hooks must be cleaned frequently. All conductive objects must be electrically grounded as

well.

PROCEDURE

To prime the pump and the connecting fluid line :

- Set the air pressure regulator (F) to 0 bar (0 Psi).

- Open the fluid drain valve (N).

- Immerse the suction and discharge hoses into the paint drum.

- Increase the air pressure by opening the air pressure regulator (F) so that the pump runs slowly.

- When the fluid begins to flow regularly from the discharge hose, close the fluid drain valve (N).

Remove the air cap, the nozzle and the air cap retaining ring from the Airmix ® guns.

Turn off the atomizing air.

Trigger the gun to dispense fluid into the fluid container.

If necessary turn on the knob assembly at the rear of the gun (J) counter clockwise, to open the gun

needle valve.

If necessary increase the fluid pump air pressure.

Release gun trigger when the fluid flows regularly from the gun nozzle.

If necessary install a clean tip into the air cap (KMX 3 Ex and KMC 3 Ex). Position the air cap

assembly over the needle seat or tip (KMP 3 Ex and KMC 3 Ex) and secure in position with the

retaining ring hand tightened onto the gun.

Adjust the atomizing air pressure on the air pressure regulator (D).

Caution : Be certain there is no air leak between the power supply air outlet (H) and the gun

air inlet (J).

Turn on the fan air control valve located on the gun (J).

Trigger the gun to dispense spray coating material out of the gun air cap.

Release the trigger.

Turn the ON / OFF power supply switch to "I" :

The green indicator LED (VOLTAGE) illuminates.

The green indicator LED (TEST) iluminates.

Set up the high voltage adjustment knob fully clockwise to 85 kV.

Turn the ON / OFF gun switch to "I".

Trigger the gun toward the grounded part to be coated.

When spraying :

The red and yellow indicator LEDS should illuminate.

The green indicator LED (TEST) should be off.

Adjust the following parameters :

Fluid flow rate :

On the air spray guns (KMP 3 Ex and KMV 3 Ex) adjust the fluid flow rate using the knob

assembly at the rear of the gun (turn it counterclockwise to increase the flow rate or

clockwise to decrease the flow rate).

Atomizing air :

Use the air pressure regulator (D) to adjust the atomizing air pressure.

Whenever possible, use the lowest air pressure to obtain efficient electrostatic wrap

around. Use the fan air control valve to adjust the spray pattern.

Electrostatic effect :

Set up the electrostatic wrap-around effect with the high voltage adjustment knob (from 20

to 85 kV).

SAMES KREMLIN Page 12 Manual : 573.149.112

FAN PATTERN ADJUSTMENTS (KM.3 Ex GUNS)

KMP 3 Ex KMV 3 Ex KMX 3 Ex KMC 3 Ex

HV CONTACT

central air fan air swirling air central air fan air central air

atomization fan width wide fan narrow fan atomization narrow fan

Air adjust.

OPEN

FAN PATTERN

CLOSED

FRONT VIEW

general air air adjust. knob

supply general air

supply

ADJUSTED BY

hole for

locating pin

AIR CAP

ADAPTER black white black

SPRAY FAN

HV CONTACT HV CONTACT HV CONTACT

locating pin

hole for locating pin

hole for

knob :

Air adjust.

knob :

air adjust. knob air adjust. knob

white

supply

general air

narrow fan

central air

air adjust. knob

wide fan

swirling air

6. DAILY CARE AND CLEANING



REFER TO GENERAL SAFETY INSTRUCTIONS

The fluid and air hoses and the gun must remain clean. The electrostatic wrap effect efficiency

decreases quickly when gun and hoses are dirty.

FLUID NETWORK CLEANING METHOD

Important recommendations

Cleaning and flushing of the electrostatic coating system must be carried out in a ventilated area.

The ON / OFF switches on the power supply and gun must be OFF before starting cleaning

operation.

All metallic parts located within 4 m (13 ft) around the gun must be correctly connected to the

ground. The floor must be electrically conductive and grounded.

Use cleaning solvents with the highest flash point – If possible, higher than the ambient

temperature.

Only apply a moderate amount of solvent onto a clean soft cloth or bristle brush to clean the gun and

hoses.

Synthetic resins used in the fabrication of the electrostatic manual guns can react with certain

solvents.

Avoid using the most toxic solvents. Do not use chlorinated solvents.

Clean all parts with a non-conductive (1) solvent, compatible with the fluid being sprayed (conductive

(1) solvent can cause the gun to malfunction). If cleaning requires the use of a conductive (1)

solvent, never leave this solvent inside the fluid network. Flush it with a non-conductive (1) solvent,

blow the fluid hose out with air and dry the gun carefully.

SAMES KREMLIN Page 13 Manual : 573.149.112

(1) non-conductive solvents are also called non polar solvents; conductive solvents are also called

polar solvents.

Before switching ON the electrostatic effect :

- Install the air cap assembly over the needle seat or tip and secure in position with retaining ring

onto the gun.

- After applying solvent onto the gun and hoses check they are completely dried.

- Check the cleaning solvent vapors due to the cleaning operation are totally evacuated.

Procedure

Turn the ON / OFF switch on the power supply and gun to OFF "O" (All indicator lights switch off).

Turn off the atomizing air shut off valve (E).

Fully screw clockwise the needle stop at the rear of the gun.

Trigger the gun until the atomizing air stops flowing from the front of the gun.

Empty all material from the container, then fill the material container with a solvent compatible with

the material just emptied.

Remove the air cap and tip from the gun.

Fully unscrew counterclockwise the needle stop at the rear of the gun (fluid passage open).

Decrease the air pressure on the pump air motor.

Trigger the gun to dispense solvent into a grounded waste container until the solvent is clean. If

necessary, increase the fluid pump air pressure.

When clear solvent flows from the gun, turn down the air pressure regulator (F).

Remove the fluid pump suction hose from the solvent. Go on to triggering the gun until the fluid

pump starts to overspeed denoting that all solvent has cleared the pump. Release the gun trigger.

Blow up the fluid hose with compressed air and reassemble the air cap and tip onto the spray gun.

GUN CLEANING METHOD RECOMMENDED

Never immerse the gun in solvent.

Do not use metal tools to clean the gun or the air cap holes, as they scratch them and create a

distorsion of the spray pattern.

Only use soft cloth or bristle brush.

Clean the front of the gun and the fluid nozzle with the gun pointed down, to prevent dirty solvent

from flowing back into the air passages.

AIR CAP CLEANING METHOD RECOMMENDED

Make sure that the fluid pressure has been released in fluid hose.

Remove the air cap ring and air cap from the spray gun.

Clean them with a soft brush and some solvent (do not leave these items immersed in solvent).

Blow up the air cap and air cap ring with compressed air.

After cleaning, store the air cap, tip, nozzle and needle seat or reinstall them onto the gun.

On KMX 3 Ex and KMC 3 Ex, check the electrode wire :

the wire is bent : straighten it.

the wire is broken or damaged : replace it.

Never start up a gun whose electrode wire is damaged or broken.

SAMES KREMLIN Page 14 Manual : 573.149.112

7. TROUBLESHOOTING AND ELECTRICAL TESTS

GUN OPERATION TROUBLESHOOTING CHART

TROUBLE PROBABLE CAUSE SOLUTION

Jerking or spitting spray

Air is being suctioned into material

stream. Check pump suction hose for leaks and

tighten fittings. If necessary use thread

sealant on male thread.

Unsufficient fluid pressure. Increase pump air pressure and/or

clean fluid filter.

Dirt in the fluid line. Clean the fluid line, clean the fluid filter.

Not enough fluid in the fluid

container. Fill the fluid container.

No fluid output.

Tip blocked. Dirt in the fluid being

applied. Clean air cap and tip. Use a finer fluid

filter or replace a damaged filter.

Fluid passage in gun obstructed. Clean the fluid passage and check for

obstructed needle valve. If necessary

use an inline fluid filter.

Fluid filter clogged. Clean the fluid filter.

Low fluid pressure. Increase pump air pressure / check the

fluid filter.

Fluid continuously leaking

from gun tip.

Needle tip or seat worn. Replace needle tip and seat.

Needle tip not fully seated. Replace a weak or damaged needle

spring.

Fluid leaks above the gun

trigger. Worn cartridge. Replace cartridge assembly.

Fluid leaks through holes in

air cap.

Improper position of tip over the

needle seat (KMX 3 Ex - KMC 3 Ex).

Clean the air cap and tip. Check that

fluid did not flow back in the air

passages.

O Ring on seat worn or damaged. Replace O Ring

Poor atomization.

Tip obstructed / Tip clogged (KMX 3

Ex - KMC 3 Ex). Clean tip or replace tip.

Low fluid pressure

(KMX 3 Ex - KMC 3 Ex). Increase pump air pressure and / or

clean fluid filter.

Fluid viscosity too high. Reduce viscosity adding compatible

solvent (or heating material where

appropriate).

Atomizing air pressure too low. Increase atomized air pressure.

Fluid flow rate too high

(KMV 3 Ex - KMP 3 Ex). Decrease the fluid flow rate (decrease

pump air pressure)

"Orange peel" finish.

Evaporation of solvent too fast. Use slower evaporation solvent.

Improper distance between gun and

work part. Adjust spraying distance and work

closer.

Improper thinner of fluid being

sprayed. Dilute fluid with solvent.

Poor atomization. Increase air atomization pressure.

Increase pump air pressure.

Use smaller tip size (KMX3 Ex-KMC3

Ex).

SAMES KREMLIN Page 15 Manual : 573.149.112

GUN OPERATION TROUBLESHOOTING CHART (CONT'D)

Fluid runs.

Evaporation of solvent too slow. Use faster evaporating solvent.

Excessive delivery. Spray at a greater distance.

Reduce pump air pressure.

Use smaller tip size (KMX3 Ex-KMC3 Ex).

Increase air atomization pressure.

Excessive delivery in middle

of spray (non homogeneous

spraying)

Excessive fluid flow rate

(KMP 3 Ex - KMV 3 Ex). Reduce fluid flow rate. Increase air

atomization pressure.

Improper tip size (KMX 3 Ex). Use a smaller tip.

Improper fluid thinner. Dilute fluid with solvent or heating fluid

where appropriate.

Air holes in air cap obstructed. Clean air cap thoroughly with solvent. Blow

air holes clean with compressed air.

La pagina sta caricando ...

Sames KM. 3 Ex Manuale utente

Marca: Sames

Modello: KM. 3 Ex

Categoria: Spruzzatore di vernice

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Sames KM. 3 Ex User manual
español: Sames KM. 3 Ex Manual de usuario
română: Sames KM. 3 Ex Manual de utilizare

Sames KM. 3 Ex Manuale utente

Sames KM. 3 Ex Manuale utente

in altre lingue

Documenti correlati

Altri documenti