AJA KONA 3G Installation and Operation Guide

Marca: AJA

Modello: KONA 3G

Categoria: Apparecchiature musicali supplementari

Tipo: Installation and Operation Guide

KONA Series

Capture, Display, Convert

Version 15.0r1

Published November 27, 2018

Installation and Operation Guide

KONA Capture, Display, Convert v15.0r1 2 www.aja.com

Notices

Trademarks

AJA® and Because it matters.® are registered trademarks of AJA Video Systems, Inc.

for use with most AJA products. AJA™ is a trademark of AJA Video Systems, Inc. for

use with recorder, router, software and camera products. Because it matters.™ is a

trademark of AJA Video Systems, Inc. for use with camera products.

CION®, Corvid Ultra®, lo®, Ki Pro®, KONA®, KUMO®, ROI® and T-Tap® are registered

trademarks of AJA Video Systems, Inc.

AJA Control Room™, KiStor™, Science of the Beautiful™, TruScale™, TruZoom™,

V2Analog™ and V2Digital™ are trademarks of AJA Video Systems, Inc.

All other trademarks are the property of their respective owners.

this manual is subject to change without notice. No part of the document may be

reproduced or transmitted in any form, or by any means, electronic or mechanical,

including photocopying or recording, without the express written permission of AJA

Video Systems, Inc.

Contacting AJA Support

When calling for support, have all information at hand prior to calling. To contact AJA

for sales or support, use any of the following methods:

Telephone +1.530.271.3190

FAX +1.530.271.3140

Web https://www.aja.com

Support Email suppor[email protected]

Sales Email [email protected]

KONA Capture, Display, Convert v15.0r1 3 www.aja.com

Contents

Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Contacting AJA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 1 – Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

KONA Models Covered in this Manual. . . . . . . . . . . . . . . . . . . . . . . . .5

AJA Software & Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Disk Storage Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

KONA 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

KONA 5 Card Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

KONA 4/3G Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

KONA 4 Only Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

KONA 4/3G Connectors On Card . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

KONA 4/3G Breakout Cable Connections . . . . . . . . . . . . . . . . . . . . . . 12

K3G-Box for KONA 4 & 3G. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

KONA 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

KONA 1 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Chapter 2 – Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

AJA System Test Application. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Shipping Box Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Installing the KONA Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Cabling the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

KONA 4/3G Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Installing KONA Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Software Package Installation and Re-installation . . . . . . . . . . . . . . . . 21

Firmware Update Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Firmware Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Chapter 3 – Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Using KONA with Professional Video /Audio Software . . . . . . . . . . . . . . . 24

Capture Formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

AJA Control Panel Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

AJA Control Panel User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Controlling Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Presets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Single-User & Shared Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Function Screens. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

About KONA Modal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Control Panel Operation in Standard or UFC Mode . . . . . . . . . . . . . . . . . 31

Control Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Format Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Input Select Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SDI Out Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

HDMI Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Analog Out Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Video Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Audio Setup Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Audio Mixer Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Conversion Screen (Mac OS only). . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Downstream Keyer Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

LUT Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

KONA Capture, Display, Convert v15.0r1 4 www.aja.com

Timecode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Presets Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Firmware Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Info Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Control Panel Operation in 4K Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 56

4K Transport Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Control Screen in 4K Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

SDI Out Screen in 4K Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

HDMI Screen in 4K Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

HDMI HDR Screen (KONA 4 in 4K Mode) . . . . . . . . . . . . . . . . . . . . . . 62

Analog Out Screen in 4K Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Video Setup Screen in 4K Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Audio Mixer Screens (KONA 4 in 4K Mode and KONA 1) . . . . . . . . . . . . 65

Audio Mixer Playback Monitor Mode Screen . . . . . . . . . . . . . . . . . . . 67

Audio Mixer Capture Monitor Mode Screen . . . . . . . . . . . . . . . . . . . . 69

Downstream Keyer Screen in 4K Mode . . . . . . . . . . . . . . . . . . . . . . . 70

Who is Controlling KONA? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Using Multiple AJA Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Notes on Using Multiple AJA Products: . . . . . . . . . . . . . . . . . . . . . . . 72

Using 8-bit Versus 10-bit Video. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Appendix A – Specications . . . . . . . . . . . . . . . . . . . . . . . . 73

KONA 5 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

KONA 4 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

KONA 3G Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

KONA 1 Tech Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Appendix B – Safety & Compliance. . . . . . . . . . . . . . . . . . . .84

Warranty and Liability Information . . . . . . . . . . . . . . . . . . . .91

Limited Warranty on Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Governing Law and Language; Your Rights. . . . . . . . . . . . . . . . . . . . . . 92

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

KONA Capture, Display, Convert v15.0r1 5 www.aja.com

Chapter 1 – Introduction

Overview

The AJA KONA series cards brings the highest quality 4K/UltraHD, 2K, HD, and

SD video and audio to computers running Mac, Windows or Linux Operating

Systems.

KONA Models Covered in this Manual

This manual covers the installation and operation of these models:

• KONA 5

• KONA 4

• KONA 3G

• KONA 1

NOTE: The KONA LHe Plus and KONA LHi cards share a separate AJA manual, and the

KONA IP and KONA HDMI cards each have a separate AJA manual.

AJA Software & Utilities

AJA’s KONA software and hardware were developed for powerful integrated

video/audio capture, editing, and production with a variety of 3rd-party

software. With KONA and a qualified computer, you have the ultimate system

for production, post-production, broadcast, and streaming work. AJA software

is distributed as a unified package which includes all the software, firmware,

plugins, and utility programs for AJA’s Io, KONA, and T-TAP products.

Four retail packages are available, one for Mac, one for Windows, and two for

Linux (one package for Ubuntu, one package for Red Hat/CentOS).

NOTE: Support for the Linux OS retail drivers is based on the Linux application used and

comes from the application’s vendor.

To download AJA software, go to the AJA website:

https://www.aja.com/en/support/downloads

For a complete software compatibility list, see the AJA website link:

https://www.aja.com/en/category/edit/compatibility

KONA Capture, Display, Convert v15.0r1 6 www.aja.com

Mac, Windows and Linux Packages

These packages include:

Drivers

AJA device drivers for tightly integrated hardware/software operation.

AJA Control Panel

The Control Panel provides:

• Source selection and control of your AJA hardware.

• A block diagram to show visually what routing and processing is being

performed.

AJA Control Room

Control Room is a cross-platform software application for ingest, playback and

output with AJA devices.

AJA System Test

System Test provides accurate and detailed evaluations of drive and system

performance statistics, allowing you to measure the capabilities of your system

for recording and playing back various resolutions and codecs. The application

includes:

• System Disk Test

• AJA Device Test

• Disk + Device Test

• System Report

The application tests Read and Write, Capture and Playback speeds in both

Megabytes per second and Frames per second. The disk speed tests differ from

standard disk I/O performance applications in that they specifically test the

system under conditions typically encountered with video capture, playback, and

editing.

NOTE: Theoretically the best test is to fill your storage disk to 80% and then test capture

at the highest data rate you will use.

Additional with Mac and Windows Packages

3rd-Party Plugins

AJA provided plugins for popular 3rd-party Professional Video Applications from

Adobe, Avid, Apple, and Telestream.

System Requirements

AJA Video recommends that your system meet minimum hardware and software

requirements to achieve a satisfactory level of performance. Updates to system

requirements are subject to change.

NOTE: See Software Vendor system requirements for GPU recommendations and

additional hardware requirements and recommendations.

AJA recommends:

• Mac OS 10.12 Sierra or later

• Win 10 or later with all updates

KONA Capture, Display, Convert v15.0r1 7 www.aja.com

• Linux Redhat/CentOS 7

• Linux Ubuntu 14.04 LTS and Ubuntu 16.04 LTS

• 2.5 GHz quad core i7 minimum, for HD

• 3.5 GHz eight core minimum, faster processors and more cores recommended,

for UltraHD/4K workows, especially with high frame rate

• 16GB RAM minimum, 32GB or more recommended, especially for UltraHD/4K

or High Frame Rate applications

• A reasonably fast and powerful graphics card, with plenty of on-board

memory. Examples (may be specic to application version and/or host CPU)

include:

• Nvidia K5200

• Nvidia K4200

• Nvidia M6000

• Nvidia M5000

• Nvidia M4000

• AMD W7100

• AMD W8100

• Media storage with adequate bandwidth to sustain the capture and playback

of the material you expect to be working with.

NOTE: For large scale installations with shared storage, or for very high performance

requirements, AJA recommends consultation with an experienced a system

integrator. A consultant will be able to assist with many important variables.

Disk Storage Methods

To ensure performance and quality, the disk storage system used with

the workstation must be able to meet the demands of storing real-time

uncompressed media. At the very minimum, the disk storage system must be

able to provide and maintain a consistent transfer rate from the workstation to

disk (read/write). There are a variety of system configurations and peripherals that

can provide this level of performance.

For more on disk storage performance see "AJA System Test Application" on page

17.

KONA 5 Features

KONA 5 Card Only

• Four bidirectional SDI locking HD-BNCs congurable for up to four inputs, or

four outputs, or two inputs and two outputs.

• Single Link I/O for 4K/UltraHD, HD and SD across 12G-SDI, 6G-SDI, 3G-SDI, and

1.5G-SDI

• Dual Link I/O for 1.5G-SDI and 3G-SDI (2x HD-BNC)

• Quad Link I/O for 1.5G-SDI, 3G-SDI (4x HD-BNC)

• Supports Quadrant or Two Sample Interleave transport

• HDMI 2.0 Output

• HDR (HDR10 or HLG via HDMI, 12 Bit RGB, BT2020)

• Up to 16 channels of SDI embedded audio

• Up to 8 channels of HDMI embedded audio

• Reference In BNC

KONA Capture, Display, Convert v15.0r1 8 www.aja.com

KONA 5 Card with Breakout Cable

• Up to four channel pairs of AES audio on full size BNC connectors,

configurable as two pairs in and two pairs out, or all four pairs in, or all four

pairs out.

• Reference In/LTC In (selectable)

• LTC Output

• RS-422 control via 9-pin

KONA 5 Card Connectors

Figure 1. KONA 5 Card

Four Locking

Bi-directional

HD-BNCs

Supporting Up

to 12G-SDI

Reference/

LTC Input

Locking HD-BNC

Multi-pin

Breakout Cable

Connector

ATX Power

Connector

The KONA 5 endplate provides five twist-lock HD-BNC connectors:

• One Reference/LTC input HD-BNC connector (#5 bottom)

• Four 12G-SDI capable bi-directional HD-BNC connectors (#1-#4)

KONA 5 offers one 4K/UltraHD input (over 1x 12GSDI) and passthrough of one 4K/

UltraHD Output (over 1x 12GSDI), and additional monitoring is also available via

HDMI.

A multi-pin connector at the top of the card attaches to the supplied breakout

cable.

Five short HD-BNC (locking) to full size BNC adapter cables are also provided.

KONA 5 Breakout Cable

Figure 2. KONA 5 Breakout Cable

NOTE: KONA 5 breakout cables cannot be used with KONA 4/3G cards, and vice versa.

KONA Capture, Display, Convert v15.0r1 9 www.aja.com

The six-foot long KONA 5 breakout cable has a multi-pin connector for the rear of

the KONA 5 card, and on the other end has the following full size BNC connectors:

• AES Ch 1/2 In

• AES Ch 3/4 In

• AES Ch 5/6 In

• AES Ch 7/8 In

• AES Ch 1/2 Out

• AES Ch 3/4 Out

• AES Ch 5/6 Out

• AES Ch 7/8 Out

• LTC In

• LTC Out

In addition, one female 9-pin D connector on the breakout cable provides RS-422

Machine Control for devices using RS-422 SMPTE (Sony protocol).

Figure 3. KONA 5 Breakout and Adapter Cables

Digital AES

Audio Input BNCs

Channels 1-8

Digital AES

Audio Output BNCs

Channels 1-8

RS422 Machine Control to VTR

9-pin D-sub (male)

HDMI Output (1)

SDI I/O 1

SDI I/O 2

SDI I/O 3

SDI I/O 4

Reference/LTC Input

LTC Output BNC

LTC Input BNC

5 HD-BNCs

to 5 Standard BNCs

KONA 5

PCIe Bracket

KONA Capture, Display, Convert v15.0r1 10 www.aja.com

KONA 4/3G Features

Video I/O

• SD-SDI, HD-SDI, Dual Link HD-SDI, HSDL, and 3G HD-SDI inputs

• HDMI 1.4b output

• KONA 3G I/O supports SD and HD over HDMI

• HDMI v2.0

• 30/36 bits/pixel, RGB or YUV, 2.25 Gbps

• 2K, HD, and SD, UltraHD with HFR support up to 60p 4:2:0

• HDR10 Support - HDR Infoframe metadata, in accordance with HDMI 2.0a/

CTA-861.3

• 2K support that includes 2048x1556 and 2048x1080 formats

• 4K and UltraHD capture and playout

• KONA 3G supports frame rates up to 30 fps

• KONA 4 supports frame rates up to 60 fps

• 12-bit HD component analog video and SD analog component or composite

and s-video output

• 10-bit HD/SD Video+Key Output

• HD/SD Hardware Downstream Keyer

KONA 4/3G supports Dual Link HD-SDI (4:4:4). KONA 4/3G supports the ingest

and output of SMPTE-372M compliant 4:4:4 RGB video and 4:2:2 1080p 50, 1080p

59.94, and 1080p 60 at 10-bit.

Conversion

• Broadcast quality hardware-based 10-bit down-conversion

• Broadcast quality hardware based 10-bit up-conversion

• Broadcast quality hardware based 10-bit cross-conversion (1080 to 720 and

720 to 1080)

• Broadcast quality hardware based 10-bit SD aspect ratio conversion

(anamorphic to letterbox, etc.)

KONA 4/3G features hardware-based full 10-bit broadcast quality motion

adaptive SD to HD up-conversion, HD to SD down-conversion and HD to HD

cross-conversion. The quality of the conversion features found in the KONA 4/3G

is virtually identical to AJA’s award winning stand-alone converter products used

throughout the post production market. The KONA 4/3G built-in up-converter

uses a full 10-bit path, fully motion adaptive de-interlacing, and large multi-

point digital interpolators. Down-conversion uses large multi-point digital

interpolators, anti-alias filtering and interpolation.

Cross-conversion is high-quality hardware-based, providing capability to

streamline dailies and offers true broadcast picture quality in real time. Because

these functions are in hardware on the card, they are available full time, all

the time—with no CPU load. Such conversions are useful for cost effective

monitoring, making standard definition dubs of an HD project, or upconverting

from a standard definition project to an HD deliverable.

Audio I/O

• 8-channel 24-bit, 48kHz digital AES/EBU audio

• 16 channels of SDI embedded digital audio

KONA 4/3G supports 8-channel 24-bit 48kHz AES audio via full size BNC

connections on the supplied breakout cable—or with the optional K3G-Box,16-

channels of AES audio.

KONA Capture, Display, Convert v15.0r1 11 www.aja.com

KONA 4/3G’s high-quality input sample-rate conversion on AES inputs eliminates

the need for audio source synchronization. Sample rate converters auto-lock to

any AES input, 32-96kHz, and then convert it to 24-bit 48kHZ audio, locked to

internal KONA 4/3G video. Sample rate conversion is done at very high quality

(over 120db THD).

Signal Timing

• Genlock input with optional looping capability via the K3G- Box (terminated

on the supplied breakout cable)

• LTC (longitudinal timecode) input/output

Cabling

• Standard 2-meter length connection cables including HDMI mini to HDMI

output

UltraHD/4K Mode Capture and Playout

In 4K Mode, KONA 4/3G offers 4K capture and playback in both YCbCr and RGB.

When using a capture application that supports 4K geometry, the KONA 4/3G

maps connectors SDI1 through SDI 4 as inputs for 4K video.

When 4K playout in Quadrant mode is selected, the four SDI connectors are

remapped as outputs for driving the four quadrants of a 4K display. A large

number of 4K formats are supported for this workflow; see the specifications

("KONA 4 Tech Specs" on page 76) for supported 4K formats. For a description of

Two Sample Interleave output mapping, see "2SI Mode" on page 58.

Internal HD/SD Hardware Downstream Keyer

KONA 4/3G provides a powerful hardware keyer that can place graphic files with

an alpha channel over video in a selectable matte or the contents of the card’s

framebuffer from a software application (including AJA TV). Key a bug or text

over picture and avoid what might normally be a lengthy software render. Also,

working with these software applications, you can key video that has an alpha-

channel over video input or a matte. For example, you can load a QuickTime clip

that has an alpha-channel (a flying logo generated in the Animation codec) into

AJA TV and then place it over live video coming into the card and then passing

both on to a VTR for recording or broadcast.

KONA 4 Only Features

KONA 4 supports all the KONA 3G features listed above, and also supports:

• Quadrant and Two Sample Interleave transport standards for UltraHD and 4K

video formats

• HDR signaling and monitoring for HDR10 and HLG

• Audio Monitoring Mixer, including Host Computer and Application

KONA 4/3G Connectors On Card

Each KONA 4 and KONA 3G card is equipped with:

• Four DIN 1.0/2.3 sliding sleeve video connectors on the card endplate (a DIN

to full size BNC adapter cable snake is provided).

• One mini-HDMI output connector

• One multi-pin female D connector for use with the breakout cable provided

with the card.

KONA Capture, Display, Convert v15.0r1 12 www.aja.com

KONA 4/3G Breakout Cable Connections

NOTE: KONA 4 and KONA 3G breakout cables are interchangeable. However, these

cables cannot be used with KONA 5 cards, and vice versa.

KONA offers unsurpassed cable connectivity for a video/audio capture card.

Connections are made via the breakout cable (included with the card) and

connectors mounted on the KONA Card endplate.

KONA 4/3G provides complete I/O connectivity choices in two multi-signal

breakout cables and one HDMI-to-HDMI mini output cable. One multi-signal

cable provides AES/EBU digital BNC connections and analog video monitoring

connections. The other has four DIN 1.0/2.3 small connectors on one end and

four full size BNCs on the other providing SDI connections. Cable connections are

marked on both the KONA card endplate and on the cable connectors for easy

identification.

Figure 4. KONA 4/3G Breakout and Adapter Cables

4 DIN 1.0/2.3

small BNCs to

4 standard BNCs

Reference Input BNC

HDMI Output (1)

RS422 Machine Control to VTR

(9-pin)

SDI Out1/Link A BNC

SDI Out2/Link B BNC

SDI In1/Link A BNC

SDI In2/Link B BNC

Digital AES

Audio Input BNCs

Channels 1-8

Digital AES

Audio Output BNCs

Channels 1-8

LTC Input BNC

LTC Output BNC

SDI

KONA 4/3G

end-plate

3 BNCs (Analog Connections)

SD Out: Component, Composite, or S-Video

HD Out: Component or RGB

K3G-Box for KONA 4 & 3G

An optional 19” 1RU rack-mountable breakout box is available that attaches to the

KONA 4/3G card via cables that connect to the back of the breakout box. These

cables are supplied with the breakout box. Breakout boxes can be easily rack

mounted or placed on top of a broadcast monitor or editing desk.

KONA Capture, Display, Convert v15.0r1 13 www.aja.com

The K3G-Box for KONA 4 and 3G offers convenient connector access and

additional functionality including simultaneous BNC AES output, 2-channel RCA

analog audio monitoring, and looping BNC connection for Genlock reference and

LTC timecode. If you’re using a digital Betacam deck, HDCAM, DVCPRO HD, D5, D9

or even an HDCAM SR, you’ll have the proper connections.

Figure 5. K3G-Box Model Breakout Box (front view)

RS422

Machine

Control

Longitudinal

Time Code

(LTC)

External

Reference

(loop)

Video Monitor Out

Component/

Composite

Video Output

Analog Audio

Output

AES/EBU Audio In

Channels 1 through 16

All AES/EBU audio connectors have two channels

per connector

SDI Ports 1 through 4AES/EBU Audio Out

Channels 1 through 16

HDMI

Out

Figure 6. K3G-Box Model Breakout Box (rear view)

HDMI Output

from KONA 3G

Mini-HDMI connector

SDI Ports

1 through 4

KONA 3G

Host

Connector

KONA 4/3G to K3G-Box Connectors

Connectors on the standard cable set are labeled for their function for easy

installation and maintenance. Connectors on the optional K3G-Box (breakout

box) are similarly labeled.

8-Channel Digital AES/EBU Audio I/O

When using the standard cables, BNC connections are provided for AES/EBU

audio input/output. Four BNC connectors are provided for audio input and four

for audio output. Each BNC carries two channels. The connectors are labeled for

input/output and channels.

The optional K3G-Box provides BNC audio connections on the front panel for

16-channels of audio input and output.

Unbalanced Audio on K3G-Box

The K3G breakout box has two analog output connectors, one for each channel.

These connectors are RCA-style phono jacks.

RS-422 Machine Control

A female DE-9 connector provides connection for VTRs, camcorders, disk media

servers, and other devices using RS-422 SMPTE (Sony) protocol. This connector

is present on both the general I/O cables and the optional K3G-Box (connector

pinout is Sony 9-pin protocol).

KONA Capture, Display, Convert v15.0r1 14 www.aja.com

SDI Inputs & Outputs

On the KONA 4/3G card, DIN 1.0/2.3 sleeve locking small connectors are provided

for bi-directional SDI inputs and outputs for Single Link, Dual Link or 4K/UltraHD

I/O. A cable with four DINs on one end and four BNCs on the other end is

provided for connecting equipment to the SDI inputs and outputs.

In Standard mode, KONA 4/3G offers four video outputs altogether:

• 2 SDI outputs that are used for both High- and Standard-denition (SD/HD-

SDI)

• 2 monitor outputs (discussed later), one component analog and one HDMI

1.4a.

Each of the four outputs is independently switchable between HD and SD. For

example, if you are working in HD, you can have simultaneous HD-SDI, SD-SDI,

and HD-component analog output.

In 4K Mode, KONA 4/3G offers one 4K/UltraHD input (over 4x 3GSDI) or one 4K/

UltraHD output (over 4x 3GSDI), and additional monitoring is also available via

HDMI.

SDI inputs and outputs support video and 16-channel embedded 24-bit digital

audio.

Use SDI wherever possible for the best quality uncompressed video input,

capture, and output. If peripheral equipment has a variety of inputs/outputs, look

to see if it has SDI I/O, and use it wherever possible. Most high-end professional

broadcast equipment supports SDI (VTRs, cameras, media storage servers, etc.).

HDMI Output

An HDMI mini-connector on the KONA 4/3G endplate (full-size HDMI connectors

on the K3G-Box) provides HDMI 1.4 capability, supporting 4K up to p30 on KONA

3G, and UltraHD at up to p60 on KONA 4.

NOTE: KONA 4/3G support SD and HD over HDMI. KONA 4 also supports UltraHD and 4K

up to 60over HDMI.

HDMI also supports multi-channel embedded audio (8 channels). HDCP is not

supported on the output.

Analog Monitor Outputs

Both the standard I/O cable and the optional K3G-Box feature two groups of

three BNC connectors each, for input and output of component, composite and

Y/C functions. The signals are labeled on both the cable and K3G-Box connectors.

The analog component output can be switched between SD and HD. KONA 4/3G

features 12-bit component video output for both HD and SD. SD can be switched

to composite and Y/C. (The same three BNC connectors share component and Y/C

functions.) This allows use of an inexpensive analog monitor for both HD and SD

work. You can even use a composite video monitor. For Dual Link HD-SDI output,

HD or SD can be monitored through the component output. Dual Link HD can be

output as 4:4:4 RGB.

Component video signals are generally higher quality than composite, but not as

high-quality as serial digital (SDI).

About RGB

Although RGB is used less in today’s video systems, KONA 4/3G supports it for

A/V Monitor output. However, because the KONA 4/3G (and SMPTE SDI’s) native

format is YPbPr, AJA recommends using YPbPr when the monitor supports it.

The YPbPr format provides headroom for “superwhite” and "superblack”, and

KONA Capture, Display, Convert v15.0r1 15 www.aja.com

these video levels will be clipped when transcoding to RGB. Also, the RGB/YPbPr

transcoding involves a level translation that results in mathematical round-off

error. RGB can be configured in the Playout setup panel of the specific application

you are using with KONA 4/3G.

About YPbPr

KONA 4/3G supports three different types of YPbPr:

• SMPTE/EBU N10

• Betacam (NTSC)

• Betacam (NTSC-J [Japan])

These three formats differ in level only and can be configured in the Playout

setup panel of the specific application you are using with KONA 4/3G.

Reference Video

A single BNC on the standard KONA cable—or two BNC connectors on the K3G-

Box (looping)—allow you to synchronize KONA outputs to your house analog

reference video signal (or black burst). If you have a sync generator or central

piece of video equipment to use for synchronizing other video equipment in your

studio, connect its analog composite output here. When KONA outputs video,

it locks to this reference signal. When connecting a reference video source, the

locking signal should be the same format as the Primary format selected in KONA

software. It is possible in some circumstances to use an alternate format video

signal if the basic frame rate is compatible.

KONA 1 Features

• 3G-SDI formats supported

• Embedded SDI audio in

• Embedded SDI audio out

• Mini PCIe form factor

• Genlock with reference input

• LTC input

• Internal HD/SD Hardware Downstream Keyer

• RS-422 machine control (9-pin)

NOTE: A Low Profile version of the KONA card with the same functionality is available

for developers.

KONA Capture, Display, Convert v15.0r1 16 www.aja.com

KONA 1 Connectors

KONA 1 BNC Connectors on Card

Figure 7. KONA 1 Card

3G-SDI

Input

3G-SDI

Output

Reference/LTC

Input

RS-422

(9 pin D)

BNC Connectors

The KONA endplate provides three full-size BNCs:

• Reference/LTC input (top)

• 3G-SDI input (middle)

• 3G-SDI output (bottom)

NOTE: KONA 1 uses on-card connectors only. No breakout cable or breakout box is

available.

RS-422 Machine Control

A female 9-pin D connector provides connection for VTRs, camcorders, disk

media servers, and other devices using RS-422 SMPTE (Sony) protocol.

KONA Capture, Display, Convert v15.0r1 17 www.aja.com

Chapter 2 – Installation

Installation Overview

The installation and set up of a KONA card is simple, and may vary slightly

depending on your system.

For the most up-to-date Mac system requirements for KONA, see the following

AJA website:

https://www.aja.com/en/support/kona-system-configuration/

For the most up-to-date Windows system requirements for KONA, see the

following AJA website:

https://www.aja.com/en/support/kona-pc-system-configuration/

AJA System Test Application

AJA System Test is a utility for measuring system performance with AJA KONA

Video Capture cards. It is installed with the KONA Driver. The application includes:

• System Disk Test

• AJA Device Test

• Disk + Device Test

• System Report

The application tests Read and Write, Capture and Playback speeds tests in both

Megabytes per second and Frames per second. The disk speed tests differ from

standard disk I/O performance applications in that they specifically test the

system under conditions typically encountered with video capture, playback, and

editing.

We suggest the best test is to fill your storage disk to 80% and then test capture at

the highest data rate you will use.

Unpacking

As you unpack your shipment, carefully examine the contents. Ensure you

received everything and that nothing was damaged during shipping. If you find

any damage, immediately notify the shipping service and supply them with a

complete description of the damage. AJA will repair or replace damaged items.

If you find shipping damage, contact your AJA dealer or distributor for details on

how to have your KONA card repaired or replaced.

NOTE: Save packing materials and the shipping box. If you ever require service or move

your system use the packaging materials and box for safe shipment.

Shipping Box Contents

Your KONA shipment includes:

• KONA 1, KONA 3G, KONA 4, or KONA 5 PCI-Express card

• Associated cables for the KONA card (see below)

KONA Capture, Display, Convert v15.0r1 18 www.aja.com

KONA 4/3G Cables

If you purchased the KONA 4 or KONA 3G, you will also receive these cables:

• HDMI mini-to-HDMI output cable

• KONA 4/3G SDI In/Out adapter—small 4x DIN 1.0/2.3 sliding sleeve connectors

on the adapter cable are used to connect the KONA card to full-size BNCs for

ease of use and compatibility with professional equipment.

• AES BNC digital audio connectors, RS422, and Reference Input.

If you purchased the optional K3G-Box breakout box, it ships with a multi-pin to

multi-pin cable for connecting from the KONA 4 or 3G card to the breakout box.

The x4 BNC cable to DIN 1.0/2.3 connectors cable that shipped with the card is

needed to connect the SDI connectors out of the card to the breakout box. Also,

the HDMI cable connects between the KONA 4/3G card and the box rear panel.

NOTE: KONA 5 breakout cables cannot be used with KONA 4/3G cards, and vice versa.

KONA 5 Cables

Provided with the KONA 5 card are:

• 1x multi-pin breakout cable, 6 feet

• 5x HD-BNC (twist lock) to full-size BNC adapter cables

Installing the KONA Card

Figure 8. KONA Card Example

The KONA card can be installed into a PC chassis, legacy Mac Pro chassis with PCIe

slots, or into a Thunderbolt PCIe external chassis.

IMPORTANT: The KONA 5 card requires ATX power. For customers who wish to use a

Thunderbolt 3 expansion chassis, the chassis must provide ATX connectivity and

adequate power.

1. Turn o power to the host chassis.

2. Touch the outside of the chassis to discharge any body static.

3. Remove the power cable from the back of the chassis.

4. Open the chassis.

5. Locate a recommended PCIe slot (see the AJA website for slot selection

instructions).

6. Remove the backplate from the PCIe slot.

KONA Capture, Display, Convert v15.0r1 19 www.aja.com

7. Touch the chassis to discharge any body static.

8. Remove the KONA card from its anti-static bag.

9. Carefully insert the card by rocking it slowly into the slot. Ensure the card

aligns properly with the slot opening and is fully seated.

10. (KONA 5 card only). Connect an ATX power cable from the host

motherboard to the rear of the KONA 5 card.

Figure 9. KONA 5 ATX Power Connection

11. Secure the card in the chassis.

12. Close the chassis.

13. Power up the chassis.

NOTE: Always put a RAID controller and KONA on separate PCIe buses. This improves

performance by reducing bus contention.

KONA Capture, Display, Convert v15.0r1 20 www.aja.com

Cabling the System

KONA 4/3G Cable Connections

Figure 10. Typical KONA 4/3G System Connections

Digital VTR with SDI Inputs

SDI Video

with Embedded

Audio In/Out

AES/EBU Audio Out

to Monitor System

External Storage

Computer Monitor

•

Optional

Genlock

Reference

HBA for connection

of external storage

Video Monitor

Component Video

Workstation computer

AJA KONA 4/3G Card

Installed

inside computer

SDI cable

4-mini BNCs

to 4 standard

BNCs

SDI Out1/Link A BNC

SDI Out2/Link B BNC

SDI In1/Link A BNC

SDI In2/Link B BNC

In 4K Mode all four

mini BNCs are Inputs or Outputs,

one for each Quandrant of the image

SDI Out1=Left top

SDI Out2=Right top

SDI Out 3=Left bottom

SDI Out 4=Right bottom

3 BNCs (Analog Connections):

Component,

Composite,

or S-Video

In HD Can Only Be Component

Reference Input BNC

LTC Output BNC

LTC Input BNC

RS422

Machine Control

(9-pin)

Audio Input BNCs

Channels 1-8

(2 channels/connector)

Audio Output BNCs

Channels 1-8

(2 channels/connector)

HDMI Output cable

La pagina sta caricando ...

AJA KONA 3G Installation and Operation Guide

Marca: AJA

Modello: KONA 3G

Categoria: Apparecchiature musicali supplementari

Tipo: Installation and Operation Guide

Scarica il pdf

rapporto

in altre lingue

English: AJA KONA 3G

AJA KONA 3G Installation and Operation Guide

AJA KONA 3G Installation and Operation Guide

in altre lingue

Documenti correlati

Altri documenti