Haier LT22R3CW Manuale utente

Contents

EN-1 Digital LCD / LED LCD Television Instruction Manual

Contents

Safety Warnings 2

WELCOME............................................................. 2

IMPORTANT INFORMATION ................................ 2

About your LCD /LED LCD TV 5

INSTALLING THE STAND.......................................5

GET TO KNOW YOUR TV....................................... 7

GET TO KNOW YOUR REMOTE CONTROL ......... 11

CONNECTING YOUR TV......................................12

ANTENNA CONNECTION ..................................................12

IMPROVE YOUR SIGNAL ....................................................12

CONNECT YOUR PC TO THE TV .......................................12

CONNECT A DVD PLAYER TO YOUR TV ........................12

CONNECT A DVD PLAYER OR VCR TO YOUR TV ........12

Connection Option 1 .........................................................12

Connection Option 2 .........................................................12

SCART INPUT.........................................................................12

HDMI INPUT...........................................................................13

MOUNT YOUR TV ONTO THE WALL...............................13

PREPARATION OF YOUR REMOTE CONTROL....13

BATTERY INSTALLATION....................................................13

BATTERY CAUTION..............................................................13

Getting Started 13

Setting up........................................................... 13

LOCATION...............................................................................13

CONNECTION........................................................................13

SWITCHING YOUR TV ON..................................................14

TUNING YOUR TV ...............................................14

SWITCHING TO AN EXTERNAL SOURCE OTHER

THAT TV...................................................................................14

AUTO SEARCH.......................................................................14

DIGITAL MANUAL SEARCH...............................................14

Analog Manual Search ......................................................15

Channel Edit..........................................................................15

RENAME..................................................................................16

MOVE.......................................................................................16

Setting favourite channel.................................................16

SKIP...........................................................................................16

GUIDE (Electronic Program Guide) ...............................16

COMMON INTERFACE ........................................17

Software Update function ...............................................17

Operation...............................................................................18

USING YOUR TV.................................................. 18

How to select the TV program........................................18

HOW to adjust volume......................................................18

CH.LIST function ..................................................................19

ADJUSTING PICTURE SETTINGS ....................... 19

Changing the Picture Setting ..........................................19

ADJUSTING SOUND SETTINGS .........................19

Changing the Sound Setting ...........................................19

FUNCTION SETTINGS......................................... 20

TIME SETTINGS .................................................. 21

LOCK MENU SETTING ........................................23

SHORTCUT MENU DISPLAY...............................24

Using the features 26

Teletext functions 26

Teletext....................................................................................26

USB MODE..........................................................27

TO USE THE USB DEVICE ...................................................27

When connecting/removing the USB device ...........27

Operating the USB device................................................28

Playing a Picture..................................................................28

Playing Music........................................................................28

Playing a Movie....................................................................29

Text...........................................................................................29

Using External USB Disk For Recording...........29

TIME SHIFT .............................................................................30

RECORDING...........................................................................30

USING YOUR DVD PLAYER

(certain models only) ........................................ 31

ADDITIONAL DVD FUNCTIONS.........................32

Reference Sections 33

TROUBLESHOOTING..........................................33

Specification ...................................................... 34

Safety Warnings

Digital LCD / LED LCD Television Instruction Manual EN-2

WELCOME

Thanks for buying this 19"/22"/24"/32"/40" HD Ready Digital LCD/LED LCD TV. This guide will help you set up and begin

using your TV.

First, check the contents of your box with the parts checklist below:

19"/22"/24"/32"/40" HD Ready Digital LCD/LED LCD TVt

Remote control t

AAA battery t ×2

Instruction Manualt

Warrantyt

TV Standt

5XScrews for TV stand(only for 32"/40" model)t

Component adapter , Component audio adapter , SCART adapter (only for 32"/40" model)t

Cover bottom (only for 32"/40" model)t

Now you can get started!

IMPORTANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy

moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.

CAUTION: S Please read this manual carefully before using your television and keep this manual in a

good place for future reference.

STo achieve the best performance of your television, read this User‘s Manual carefully and

properly store it for future reference.

SInformation of screen displays and figures in the User’s Manual may vary due to technical

innovations.

CAUTION: SUnauthorized disassembly of this product is prohibited.

TruSurround XT, SRS and the symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is

incorporated under license from SRS Labs, Inc.

TruSurround XT® creates a truly immersive surround sound experience with rich bass and clear dialog from only

two speakers.

WARNING To prevent the spread of re,keep candles or other open ames away from this product at all

times.

WARNING

*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as

there is no any accessory inside the casing.

*If necessary, please contact authorized after-sales services.

could result in serious injury by high voltage.

*An exclamation mark in a triangle: Major part or accessory of which technical

must be followed i t is to be replaced.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

f i

Safety Warningss

EN-3 Digital LCD / LED LCD Television Instruction Manual

The product should be tightly fixed to avoid

drop damages and even fire.

To avoid fire hazards, do not use this

product under direct sunlight or closely

to heat sources.

Do not locate the product close to water

or oil, which may cause fire hazards.

Unplug the power supply and antenna of

the product when there is a rainstorm,

especially

Thunderstorm.

Do not use damaged or worn electric plugs

and keep electric cord away from heat sources

to avoid electric shocks or fire hazards.

Do not connect excessive sockets in parallel

or share the same socket by multiple plugs

to avoid fire hazards.

The product must be placed on a solid and

stable surface to avoid collapse.

Unauthorized disassembly of the television

is prohibited to avoid electric shocks or fire

hazards. Contact

authorized after-sales

service if technical

service is needed.

Keep the product away from a transformer

or heat source to avoid fire hazards.

Disconnect the product from power supply

and contact authorized after-sales service

if abnormal sound is heard in the product.

Safety Warnings

Digital LCD / LED LCD Television Instruction Manual EN-4

Don‘t use or store inflammable materials

near the product to avoid explosion or fire

hazards.

Don’t place the product in a humid area to

avoid fire hazards.

The antenna of the product should be away

from electric cable to avoid

electric shocks.

Never touch the plug when your hand is wet

as this might cause electric shocks.

Always make sure that the televisionis well

plugged as poor electric

connection might cause fire.

When antenna is used, measures should be

taken to prevent water

from flowing down

along the cable into

the television.

Unplug the television, use soft fabric, never

chemicals, if you are going to make

cleaning of the product.

Make sure that no

water drops in the

product.

The plug and electric cable must be kept

clean to avoid electric

shocks or fire

hazards.

Disconnect the television from power supply

and antenna when there is a

rainstorm or thunderstorm

to avoid electric shocks

or fire hazards.

Disconnect the television from power supply

to avoid electric shocks or fire

hazards in a long

vocation.

About your LCD / LED LCD TV

EN-5 Digital LCD / LED LCD Television Instruction Manual

3FNPWFUIFTNBMMQJFDFPVUPGUIFCBTFTUBOE

1PTJUJPOUIFDPMVNOXJUIUIFCBTFTUBOE

3FQMBDFUIFTNBMMQJFDFJOUIFCBTF

0USHTHE46ONTOTHEBASE2OTATETHEMACHINEABOUTDEGREESACCORDINGTOTHEARROWONTHEBASESTAND

Installing the Stand

Only 19"/22"/24" LED LCD Model

About your LCD / LED LCD TV

Digital LCD / LED LCD Television Instruction Manual EN-6

Installing the Stand

Only 32"/40" LED LCD Model

1.Carefully place the TV screen face down on a table. We suggest that you place the

wrapping material from the TV package on thetable top to protect the screen from

damage.

2.Position the stand with the bottom of the TV as shown below.

4.Attach the screws from the bottom of the stand to the TV.

3.Push the stand onto the TVǄ

.

About your LCD / LED LCD TV

EN-7 Digital LCD / LED LCD Television Instruction Manual

About your LCD/LED LCD TV

GET TO KNOW YOUR TV

Only 19"/22" LCD Model

Front control panel



108&3



4063$&

$BMMUIF*OQVU4PVSDFNFOV$POöSNCVUUPO

XIFOPQFSBUJOHNFOV



.&/6

1SFTTUPTFMFDUUIFNBJONFOV



70-

7PMVNFEPXO-FGUPSJFOUBUJPOUPBEKVTUUIF

JUFNJOUIF04%

70-

7PMVNFVQ3JHIUPSJFOUBUJPOUPBEKVTUUIF

JUFN1SFTTUPFOUFS



$)

57DIBOOFMEPXOUPTFMFDUUIFJUFNJOUIF

NFOV

$)

57DIBOOFMVQUPTFMFDUUIFJUFNJOUIFNFOV



1PXFSJOEJDBUPS



3FNPUF4FOTPS

POWER

1SFTTUPUVSOUIF57POBOEPò

About your LCD / LED LCD TV

Digital LCD / LED LCD Television Instruction Manual EN-8

Rear Terminals Control

1MFBTFSFGFSUPBDUVBMQSPEVDUPGUIF%7%TMPUBOE

CVUUPOT

+VTUUBLFPOF57XJUI%7%GPSFYBNQMFQMFBTFTFF

UIFSFBM

About your LCD / LED LCD TV

EN-9 Digital LCD / LED LCD Television Instruction Manual

Only 19"/22"/24" LED LCD Model

F

ront control panel

6

7

1

SOURCE

Call the input Source menu/Conrm button

when operating menu.

2

MENU

Press to select the main menu.

3

VOL-

Volume down/Left orientation to adjust the item

in the OSD.

VOL+

Volume up/Right orientation to adjust the item

in the OSD.

4

CH-

TV channel down/to select the item in the menu.

CH+

TV channel up/to select the item in the menu.

5

POWER

6

Power indicator

7

Remote Sensor

DC IN

USB

DIGITALVOUT

(COAXIAL)

HDMI IN

COMPONENT

IN

AV IN

Y Pb Pr

VIDEO L-AUDIO-R

L-AUDIO-R

PC/DVI AUDIO IN

PC IN

SCART

1

2 3

4

5

6

7

89

10

11

ANT IN

1

DC IN input

2

EARPHONE

output

3

USB

input

4

Digital output input

5

HDMI IN

input

6

PC IN input

7

PC/DVI AUDIO IN

input

8

TV SCART input/output

9

COMPONENT

AUDIO

input

>

AV IN input

A

COMPONENT IN

input

1

2

4

3

5

Content Si

d

e

Facing T

owar

ds

You

SOURCE

MENU

VOL+

VOL-

CH+

CH

-

STOP

PLAY/PAUSE OPEN/CLOSE

PREV NEXT

Rear Terminals Control

(Just take the TV with

DVD for example,please

see the real.)

About your LCD / LED LCD TV

Digital LCD / LED LCD Television Instruction Manual EN-10

Only 32"/40" LED LCD Model

F

ront control panel









LOV

HC

UNEM

ECRUOS



1

SOURCE

Toggles between all the available input

sources

2

MENU

Press to see an on-screen menu of your TV’s

features.

3

VOL-/+ Press to increase or decrease the volume .

4

CH-/+

Press to change channels.

5

POWER Press to turn the TV on and o.

HDMI 1 IN

USB

DIGITAL AUDIO OUT

(OPTICAL )

ANT IN













2 INIMDH

NITNENOPMOC

CP

Y P

b

P

r

L

OIDUA

R

NICP

3 INIMDH

TRACS





    

PC/DVI AUDIO

1

SCART

input

2

Component input

3

Component Audio

input

4

PC input

5

PC/DVI AUDIO

input

6

HDMI3 IN input

7

HDMI2 IN

input

8

Common Interface

9

Earphone

0

ANTENNA input

A

Optical output

B

USB

C

HDMI1 IN input

Rear Terminals Control

About your LCD / LED LCD TV

EN-11 Digital LCD / LED LCD Television Instruction Manual

GET TO KNOW YOUR REMOTE CONTROL

When using the remote control, aim it towards the remote sensor on the TV.

1

POWER

2

DVD Menu / REC

3

DVD open / close

4

Picture Mode

5

Sound Mode

6

Call Screen Display

7

Sleep button

8

DTV Audio / NICAM / DVD Audio

9

Aspect Ratio Control button

0

Channel list button

A

Subtitle button

B

Program Number Channel selection

C

Source Exchange

D

Q.VIEW / Swap Channel

E

V+/V-: Volume selection

F

P+/P-: Channel selection

G

Mute

H

Menu button

I

GUIDE button (only for DTV)

J

Favourite list button

K

OK button

L

Cursor Mover button

M

Back button (only for USB)

N

Exit Screen Display

O

REPEAT (only for DVD, USB, REC & Timeshift)/CANCEL button

P

Zoom (only for DVD & USB)/Teletext index (only for TV) / REC index

Q

Play / Pause button (only for DVD & USB) / Timeshift

R

Stop (only for DVD, USB, REC & Timeshift)

S

Fast Reverse (only for DVD, USB, REC & Timeshift)

T

Fast Forward (only for DVD, USB, REC & Timeshift)

U

Previous (only for DVD, USB, REC & Timeshift)

V

Next (only for DVD, USB, REC & Timeshift)

W

DVD Set up / Text

X

DVD Title / Teletext Mix

Y

DVD Search / Teletext Subcode

Z

DVD 10+ / Teletext Hold

[

DVD Program / Teletext Reveal

\

DVD A-B Repeat / Teletext Size

]

DVD Call / Teletext Mode

`

DVD Angle/Teletext Time

Note

RED button, GREEN button,O BLUE

button and YELLOW button are fast

text button in analog signal. Function

button in DVBT (just reference the

OSD)

About your LCD / LED LCD TV

Digital LCD / LED LCD Television Instruction Manual EN-12

CONNECTING YOUR

TV

ANTENNA CONNECTION

Connect your aerial to the back of the TV into the

ANTENNA IN socket.

IMPROVE YOUR SIGNAL

To improve picture quality in a poor signal area, use a

signal amplifier (not supplied).

CONNECT YOUR PC TO THE TV

You can use your TV as a monitor for your personal

computer by connecting it with a VGA cable (not

supplied).

Read your computer user guide and check it has a

A

VGA connector.

Turn the power o on your TV and PC.

B

Connect a D type 15-pin VGA interface cable to the C

VGA video interface connector on the PC. Connect

the other end of the cable to the PC interface

connector on the TV. Tighten the screws on the

VGA connectors and connect the audio cable (not

supplied) to the audio input socket on the back of

the TV.

Turn on the power of the TV firstly and then the PC.

D

Press the button on the TV or TV remote control to E

set the video input mode to VGA.

Once the image shows, if there is noise present,

F

change the VGA mode to another resolution,

change the refresh rate to another rate or adjust

the brightness and contrast on the menu until the

picture is clear.

CONNECT A DVD PLAYER TO YOUR

TV

Connect the DVD video outputs (Y, Pb, Pr) to the

COMPONENT (Y, Pb, Pr) IN socket on your TV.

Turn on the DVD player and insert a DVD.A

Press the button to select .B

Refer to the DVD player user guide for operating C

instructions.

DVD

CONNECT A DVD PLAYER OR VCR TO

YOUR TV

There are two ways in which you can connect a DVD

player or VCR to your TV. Make sure that both the TV and

DVD player or VCR are switched o before you connect

them.

Connection Option 1

Connect the audio and S-VIDEO cables from the VCR A

output jacks to the TV input jacks.

Insert a video tape into the VCR and press

B PLAY on

the VCR.

Turn on the power of the TV first, then the VCR.

C

Press theD SOURCE button on the TV to set the video

input mode to S-VIDEO.

Connection Option 2

Connect the AV DVD/VCR outputs to the AV IN A

socket on your TV.

Press the

B SOURCE button on the TV to set the video

input mode to AV.

SCART INPUT

Connect the scart lead from the external device A

(DVD player, Set-top box or games console) to the

TV scart socket.

About your LCD / LED LCD TV

EN-13 Digital LCD / LED LCD Television Instruction Manual

Press theB SOURCE button to select SCART mode.

Press the

C PLAY button on the external device.

HDMI INPUT

Connect the cable from the HDMI device to the TV A

HDMI socket.

Press the

B SOURCE button to select HDMI mode.

Refer to the HDMI device user guide for how to

C

operate.

MOUNT YOUR TV ONTO THE WALL

You can mount your TV onto the wall by using a wall

bracket (not supplied). Use M4/M6 machine screws (4

pcs) to screw the TV onto the bracket (not supplied).

PREPARATION OF

YOUR REMOTE

CONTROL

BATTERY INSTALLATION

Place the remote control face down, then open the A

cover of the battery compartment.

Install two AAA batteries. (The + and - symbol of the B

battery must match with the marks on the remote).

Close the cover of the battery compartment.C

BATTERY CAUTION

Confirm there is no object between the remote control

and the remote sensor of the TV set.

Sunshine or other strong light will interfere with the

signal sent by the remote control. In this situation turn

the TV set to avoid the direct light source.

Do not put the remote control in direct heat or in a

damp place as you may damage the remote.

Please use two AAA 1.5V batteries. Do not mix battery

types. Install the batteries at the correct polarities. Do

not use rechargeable batteries. If your TV is to be stored

for a period of time, remove the batteries from the

remote control.

03 Getting

Started

Setting up

LOCATION

You will need to place your TV near your plug socket

(so the power cable can comfortably reach) and within

reach of your aerial socket or extension lead.

CONNECTION

About your LCD / LED LCD TV / Getting Started

Getting Started

Digital LCD / LED LCD Television Instruction Manual EN-14

Insert your TV aerial lead into the Antenna input at A

the side of the TV.

Insert the batteries into the remote control. Make

B

sure they are inserted the right way around,

matching the polarity as indicated inside the battery

compartment.

SWITCHING YOUR TV ON

Press the A POWER button on the right side of the TV

once. A red ashing light will appear in the corner of

the screen.

Press

B POWER on the remote control. The TV will turn

on and the red light will turn blue. This may take a

few moments.

Select your chosen language when prompted from

C

the list that will appear on screen. Use the  button

to scroll to the language you want and press to

confirm.

TUNING YOUR TV

SWITCHING TO AN EXTERNAL

SOURCE OTHER THAT TV

If you have attached a DVD player or similar external

device to the TV, you will need to tell the TV to display

the content from it. Simply press SOURCE which will

bring up the source menu in the left corner of the screen,

use the  and  button to highlight the required

source and press OK select.

For details of how to plug in other equipment see GET

TO KNOW YOUR TV on page 5.

AUTO SEARCH

Press A MENU button.

Press B  button to select Tuning menu, press 

button to enter.

Press

C  button to select Country item.

Press  button to select you needed.

Press

D  button to select Auto Search item, press

OK button to enter.

Press  button to select the OK option, and press

OK button to start searching.

Press the MENU button, you can choose to skip the

TV /DTV Search or not.

Press E EXIT button to stop auto search during

searching.

Note

It may take a few moments to complete the Auto O

Search.

DIGITAL MANUAL SEARCH

Press A MENU button.

Getting Started

EN-15 Digital LCD / LED LCD Television Instruction Manual

Press B  button to select Tuning menu, press 

button to enter.

Press

C  button to select Digital Manual Search

item, press  button to enter.

Press D  button to select the Channel.

Press OK button to start searching.

Once a channel is located, you can press

E OK button

to save it.

Press EXIT button to exit.

Analog Manual Search

Follow the below steps when you need to have a manual

search.

Press

A MENU button.

Press B  button to select Tuning menu, press

button to enter.

Press

C button to select Analog Manual Search

item, press  button to enter.

Press D  button to select Search item, press

button is used to select the higher frequency

channel.

Press  button is used to select the lower frequency

channel.

And then select Storage To, press

E  button to

select the position number you want the channel

on. Once a channel is located, you can press red

button to save it. Press EXIT button to exit.

Sound SystemV

Press button to select “Sound System”, then

press  button to select the correct sound system.

Current CHV

Press  button to select the channel number to

edit.

Storage ToV

Press  button to select the program number you

want to storage to.

Fine tuneV

If the picture and/or sound are poor, try using the

FINE TUNE feature. Do not use this feature unless

reception is poor.

Repeat above steps

A A-C, then press button to

select the Fine Tune item.

Press

B  button repeatedly to carry out fine

tune, till the best picture and sound are obtained,

then loosen the button.

Channel Edit

Using this function, you can rename, move, set favorite

channel and skip the channel in the analogue mode.

Press

A MENU button.

Getting Started

Digital LCD / LED LCD Television Instruction Manual EN-16

Press B  button to select TUNING menu, press 

button to enter.

Press

C  button to select CHANNEL EDIT item.

Press  button to enter the sub-menu. You can

press red, green, yellow or blue button to enter the

menu you need.

RENAME

Press A  button to select the channel, and press

green button to rename.

Press

B  button to select the number position of

channel name. Press  button to select number.

You can press the

C EXIT button to cancel the changes

at anytime.

Note

The RENAME function is only available in ATV O

program.

MOVE

Press A  button to select the channel and press

yellow button to select the position.

Press B  button to select the number position you

want to remove to, press yellow button to confirm.

You can press the

C EXIT button to cancel the changes

at anytime.

Setting favourite channel

Press A  button to select the channel, press red

button to set your favourite channel.

You can press the red button to cancel the changes

B

at anytime.

Press

C FAV button on the remote control and

Favourite List will be displayed.

Press

D  button to select the channel, and press

OK button to enter.

SKIP

PressA  button to select the channel and press

blue button to skip the current channel.

You can press the

B blue button to cancel the changes

at anytime.

GUIDE (Electronic Program Guide)

Using this function, you can access the DTV program

information.

Press

A MENU button.

Press B  button to select TUNING menu.

Press button to enter.

Getting Started

EN-17 Digital LCD / LED LCD Television Instruction Manual

Press

C  button to select the guide item.

Press OK button to enter the submenu, the

electronic program guide is displayed.

You can quickly call up Guide menu by GUIDE

button on the remote control.

Note

Only DTV mode.O

COMMON INTERFACE

The common interface (CI) slot is designed to accept the

Conditional Access (CA) Module and Smart card in order

to view the pay TV programmes and additional services.

Contact your Common Interface service provider to get

more information about the modules and subscription.

Please noted that CA modules and smart cards are

neither supplied nor optional accessories from us.

Warning

Switch o your TV before any module is inserted in t

the Common Interface slot.

Insert the CAM correctly, then Smart Card to the CI A

slot that is located at the side of the TV.

CI Slot

CAM

Smart Card

Turn on the TV and it will display the below message B

if the CA module is detected. Wait for few moments

until the card is activated.

Press the

C MENU button to display the Main Menu

and use the  and  button to highlight the

“Common Interface” line and press the “OK” button.

Detailed information on the CI card in use is

D

displayed.

Press

E OK button to access the card menu. Refer to

the module instruction manual for setting details.

When module is removed, the following message

F

will appear on the screen.

Software Update function

When you get the updating news from the TV shop’s t

web, you can update the operating software using

the Download menu. The data for various units are

transferred consecutively on a special receiving

channel.

You need to search the channel with updating code t

stream.

Getting Started

Digital LCD / LED LCD Television Instruction Manual EN-18

Note

You can get information from the TV shop or O

internet.

Operation

Press A MENU button.

Press B  button to select TUNING menu, press 

button to enter.

Press

C  button to select Software Upgrade item.

Press

D  button to set it as On. (The default is O)

The Start Upgrade item can be selected.(The default

E

is grey and cannot be selected).

13%

Press EXIT to cancel download

Press F  button to select the Start Upgrade option

and use OK button to enter. Then the TV will restart

and search the upgrade information.

Note

If the upgrade information is received, the TV will O

begin to upgrade. Or else, the TV will be back the

DTV source.

Load the receiver identification. This process may

G

also take several minutes. You can press EXIT button

to cancel the download and your TV set will be back

the DTV source.

100%

15%

Press EXIT to cancel download

Updating in progress - Do not turn off the TV

After the download has finished, your TV set will H

enter burning state and the indicator light is shining.

The menu 4 of right appears.

The set will be back the DTV source when the update is

completed.

USING YOUR TV

How to select the TV program

Using Program number button Enter the channel A

number with the number keypad on the remote

control.

Using

B P+/P- button.

Press the P+/P- button to select a channel number.

HOW to adjust volume

Press V+/V- button on the remote control or the side of

the TV to adjust the volume level.

Getting Started

EN-19 Digital LCD / LED LCD Television Instruction Manual

CH.LIST function

Press CH.LIST button on the remote control will display

Channel List menu, and then press  button to enter.

Press button to select the channel, and then press

OK button to enter.

ADJUSTING PICTURE

SETTINGS

Changing the Picture Setting

Press A MENU button.

Press B  button to select Picture menu, press 

button to enter.

Press

C  button to select the item requires

adjusting.

Press

D  button to adjust the selection item.

When you are satisfied with your choice, press the

E

EXIT button to return to normal viewing or press

MENU button to return to the previous menu.

ContrastV

This will adjust the intensity of bright parts in the

picture but keep the dark parts unchanged.

BrightnessV

This will adjust the light output of the complete

picture, which will mainly aect the darker areas of

the picture.

ColourV

This will adjust the saturation level of the colours to

suit your personal preference.

SharpnessV

This will adjust the sharpness of fine details in the

picture.

TintV

Allows you to select the colour mix (Tint) of the

picture.

Note

The Tint function is only available in NTSC mode.O

ModeV

This will select the picture mode. Select Standard/

Mild/User/Vivid according to the program. You can

quickly select the desired mode by P.MODE button on

the remote control.

Colour temperatureV

This will increase or decrease Warm (red) and Cool

(blue) colours to suit personal preferences.

Select Cool to give the white colour a blue tint,

Normal to give the white colour a neutral tint, Warm

to give the white colour a red tint.

Noise ReductionV

Automatically filters out and reduces the image noise

and improves picture quality when receiving weak

video signals.

Select O/Low/Standard/High according to the

image noise.

ResetV

To recover to the default value.

ADJUSTING SOUND

SETTINGS

Changing the Sound Setting

Press A MENU button.

Press

B  button to select Sound menu, press 

button to enter.

La pagina si sta caricando...

Haier LT22R3CW Manuale utente

Questo manuale è adatto anche per

Haier LT22R3CW Manuale utente

in altre lingue

Documenti correlati

Altri documenti