Ardo Bellis Manuale utente

Marca: Ardo

Modello: Bellis

Tipo: Manuale utente

ardo bellis

electric breastpump

Instructions for use | Gebrauchsanweisung | Mode d'emploi |

Istruzioni per l’uso | Gebruiksaanwijzing | Instrucciones de uso

Instructions for Use

en Ardo Bellis – Electric breastpump 1 – 16

de Ardo Bellis – Elektrische Milchpumpe 17 – 31

fr Ardo Bellis – Tire-lait électrique 32 – 47

it Ardo Bellis – Tiralatte elettrico 48 – 62

nl Ardo Bellis – Elektrische borstkolf 63 – 77

es Ardo Bellis – Sacaleches eléctrico 78 – 92

Thank you for choosing the Ardo Bellis breastpump.

Vielen Dank, dass Sie sich für die Ardo Bellis Milchpumpe entschieden haben.

Nous vous remercions d’avoir opté pour le tire-lait Ardo Bellis.

Grazie per aver scelto il tiralatte Ardo Bellis.

Hartelijk dank dat u gekozen hebt voor de Ardo Bellis borstkolf.

Muchas gracias por haber elegido el sacaleches Ardo Bellis.

Ardo Bellis

Breast Shell Sizes

Ø 36 mmØ 31 mmØ 26 mm

Ø 26 mm

Ø 28 mm

Ø 22 mm

= Ø size

The breast shell size is correct if:

• the nipple moves freely in the funnel and can follow the rhythmic movements of the breastpump.

• no part, or very little, of the areola is in the funnel.

• the milk ﬂ ows and the breast feels uniformly soft after expression.

Die Brustglocke passt wenn:

• die Brustwarze sich frei im Trichter bewegt und den rhythmischen Bewegungen der Pumpe folgen kann.

• sich kein oder nur wenig Gewebe des Brustwarzenhofes im Trichter beﬁ ndet.

• die Muttermilch ﬂ iesst und sich die Brust nach dem Abpumpen überall weich anfühlt.

La téterelle est adaptée :

• lorsque le mamelon se déplace librement dans l’entonnoir et peut suivre les mouvements rythmiques du tire-lait.

• lorsque le tissu de l’aréole ne pénètre pas ou quasiment pas l’entonnoir.

• si le lait maternel s’écoule et que le sein semble détendu partout après l’expression.

La misura della coppa va bene se:

• il capezzolo si muove liberamente nell’imbuto e può seguire i movimenti ritmici della pompa.

• solo se nessuna parte o poca parte dell'areola del capezzolo si trova nell’imbuto.

• il latte deﬂ uisce e dopo l’estrazione il seno è morbido al tatto.

De borstschelp past wanneer:

• de tepel vrij in de trechter beweegt en de ritmische bewegingen van de borstkolf kan volgen.

• zich geen of maar weinig weefsel van de tepelhof in de trechter bevindt.

• de moedermelk stroomt en de borst na het afkolven overal zacht aanvoelt.

El embudo para pecho es adecuado si...

• los pezones se mueven libremente en el embudo al extraer la leche y siguen los movimientos rítmicos del sacaleches.

• si hay poco o ningún tejido de la areola del pezón en el embudo.

• la leche materna ﬂ uye y el pecho se siente suave por todas partes después de la extracción.

ardo bellis Electric Breastpump

1. Product description

aArdo Bellis breastpump

bConnection port for pumpset

cPower adapter with USB cable

dConnection opening for USB power adapter

Ardo Bellis is a vacuum pump for collecting breast milk and is intended for use at home and in professional environment.

It expresses in two phases (stimulation and expression modes) that imitate the sucking behaviour of the baby.

With Ardo Bellis you can express milk from one breast or both breasts at the same time.

The German text is the reference for the contents.

Instructions for the accessories: Only use Ardo pumpsets. Breast shells are available in the sizes ø 22 / 26 / 28 / 31, and

36 mm (see accompanying instructions for use for “Pumpset and accessories”).

1.2 Control elements and symbols

The illustrations of the control elements and symbols are located on the fold-out page of the cover. The active elements or

symbols light up.

AOn/Off button (standby button) Switches the breastpump on and off

BMemory Plus button Press the Memory Plus button: Saves the expression history of a pumping session.

Memory Plus button lights up: Sequence is saved but is not displayed.

Memory Plus button ﬂashes: Saved expression history is displayed.

CPower Pumping button Automatically starts the Power Pumping program (interval pumping over an hour).

The different segments light up green (during expressing) or white (during the

pauses) depending on the progress of the interval pumping.

DBluetooth® Shows the connection of the breastpump via Bluetooth

EBattery display Shows the charge level of the rechargeable battery

FVacuum display Step indicator for vacuum (suction level)

GCycle display Step indicator for cycle (suction frequency)

HVacuum buttons Increase or decrease the vacuum (suction level)

ICycle buttons Increase or decrease the cycle (suction frequency)

JMode button Displays the current mode and enables manual switching between stimulation and

expression modes

KStimulation mode Upper semicircle lights up orange in stimulation mode

LExpression mode Lower semicircle lights up green in expression mode

MTimer Displays the expressing time

2. Important safety

instructions and warnings

Ardo Bellis is an electrically operated reliable medical device. It has been developed and is manufactured according to CE

guidelines and the relevant safety standards. For your safety and to prevent damage to the device and to avoid the risk of

electric shock, injury, or ﬁre, please follow the safety instructions below.

READ THE INSTRUCTIONS FOR USE COMPLETELY BEFORE USING THIS

BREASTPUMP.

Not following these instructions for use may lead to damage to the device or personal injury.

KEEP THESE INSTRUCTIONS FOR USE.

For help with the initial setup or if something unexpected happens, please contact the point of sale, the hire center, or the

customer service team at the manufacturer Ardo medical AG.

Note to the user

Any complaints, problems, or safety concerns should be reported to the manufacturer or the distributor.

In the European Union (according to Regulation (EU) 2017/745 on medical devices) any serious incidents occurring in rela-

tion with the product must be reported to the manufacturer and the competent authorities in the Member State in which the

user resides.

Risk due to contamination / infection

• To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.

• Only use original Ardo pumpsets. If parts from other manufacturers are used, there is a risk of microbial contamination of

parts as well as the breast milk because the parts are not compatible.

Risk of health problems and serious injuries

• This device must not be used during pregnancy because expressing breast milk can start contractions.

• Do not use this device while driving a car (even as a passenger).

• Do not use this breastpump if you are overtired and may fall asleep during use, because this may lead to irritation of the

nipples.

• Make sure that this device is not used unsupervised by children or by people with reduced mental capabilities.

Ardo Bellis may only be used for the purposes described in Chapter 3. For all uses apart from the intended use, all warranty

and liability claims against the manufacturer are excluded.

Risk of an electric shock

• The Ardo Bellis breastpump with the power adapter is only suitable for use indoors. Do not use outdoors.

• Only use this breastpump with the supplied Ardo original USB cable and power adapter.

• Ensure that the power adapter can always be easily accessed.

• Ardo Bellis is not waterproof.

- The device must therefore not be immersed in water or other liquids nor used or stored in locations where it could

fall into water.

- Do not use in the bath or when showering.

- Do not clean in the dishwasher, under running water, or by immersing in water.

- The pump unit must not be used if it has fallen into water or is wet. If this happens, contact your service partner or

the manufacturer!

• This breastpump must not be opened or modiﬁed in any way without the permission of the manufacturer. It does not

contain any parts that are maintained by the user.

• Handle this device with care and avoid all shocks, blows, or vibrations (e.g., do not allow it to drop onto the ﬂoor). If this

device is nevertheless exposed to one of the mechanical effects described above, carefully inspect the device for damage

before the next use. If the device is damaged, contact the point of sale, the hire center or the customer service team at

Ardo medical AG.

Risk of ﬁre or toxic vapors

Keep the pump unit, USB cable with power adapter, and accessories away from sources of heat.

Risk of damage to the device or an unwanted change in the vacuum

Do not insert or suck up any objects or liquids into the tube connector port of the device.

Risk of injury due to the vacuum generated by the device or strangulation

Make sure that the device is not used unsupervised by children or by people with reduced mental capabilities.

Risk of incorrect mode of operation and reduction of the performance characteristics

• Using this device near other devices or stacked with other devices should be avoided.

• Portable and mobile RF communication equipment (radio devices including their accessories such as antennas and

external antennas) should not be used at a distance less than 30 cm (or 12 inches) from the parts and cords of the

device labeled by the manufacturer.

• The use of accessories, power adapters, and cords other than those deﬁned or provided by the manufacturer of this

device may result in increased electromagnetic noise emissions or a reduced electromagnetic immunity for the device and

lead to a faulty mode of operation.

Cybersecurity: The device is protected from piracy and unauthorized use. I If you have any indication of a violation of

cybersecurity protection please contact the manufacturer.

3. Intended use

The Ardo Bellis electric breastpump is used to express and collect breast milk from lactating or, to be more precise, from

breastfeeding women by generating a deﬁned vacuum at the breast. It can be used for single or double pumping. The

breastpump is intended for use indoors. The Ardo Bellis breastpump is intended for multiple users.

4. Operation and expressing

You can ﬁnd more information about operating and using Ardo Bellis at www.ardomedical.com.

If you need additional help, please contact the point of sale, the hire center, or the customer service team at Ardo medical AG

or speak to a lactation consultant or midwife.

4.1 Terms used

2-phase breastpump Ardo Bellis expresses in two phases: the stimulation and the expression modes, which imitate

the sucking behavior of the baby. This means a rapid cycle (suction frequency) with low

vacuum (suction level) to stimulate the let-down reﬂex and a high vacuum with a slow cycle

for efﬁcient suction.

Stimulation mode A rapid cycle (suction frequency) and low vacuum (suction level) start the breast milk ﬂowing

or trigger the let-down reﬂex.

Expression mode Slower cycle (suction frequency) and high comfortable vacuum (suction level) for efﬁcient

expressing of breast milk once the let-down reﬂex has been triggered.

Cycles Suction frequency / suction speed

Vacuum Suction level

Single pumping Expressing from one breast

Double pumping Expressing from both breasts

Let-down reﬂex A reﬂex that starts the breast milk ﬂowing.

Memory Plus Saves the personal expression history including settings and time in stimulation and

expression mode. When the breastpump is next switched on, the saved expression history

starts.

Power Pumping Interval pumping over one hour to increase the breast milk volume

“Vacuum Seal” technology Closed pump system with hygiene barriers in the breast shell itself.

4.2 Start-up

WARNING: Risk due to contamination / infection

To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.

You can operate Ardo Bellis with the enclosed USB cable or the integrated rechargeable battery.

Mains operation

Pull the ﬂap down, insert the USB cable into the USB port on the breastpump, and connect the power adapter to the mains

power supply.

Battery operation

It is not necessary to fully charge the rechargeable battery before the ﬁrst use. You can connect Ardo Bellis with the USB

power adapter and charge the rechargeable battery during the ﬁrst ﬁve hours of use at the same time (see Chapter 5).

4.3 Preparing the Ardo Bellis breastpump

4.3.1 Connecting the pumpset

Single pumping

Attach the tube connec-

tor to the Ardo Bellis.

The second opening of

the tube connector stays

closed.

Double pumping

Open the second opening

of the tube connector and

connect the tube of the

second pumpset. Connect

the tube connector to the

Ardo Bellis.

The use of the pumpset is described in the enclosed instructions for use “Pumpset and accessories”.

4.3.2 Visual inspection before each use

Every time you use the breastpump, check that …

… the USB cable and power adapter are undamaged.

… the pumpset is clean, correctly assembled, and intact.

… the pumpset is correctly connected.

4.4 Operation and procedure for expressing

Warning: Risk due to contamination / infection

To prevent contamination of your breast milk, thoroughly wash your hands with soap and water before each use.

4.4.1 Basic functions—step-by-step procedure

1Find a comfortable position for expressing, hold the pumpset on the breast shell, and center the nipple.

2Press the On/Off button to start expressing.

3The breastpump is in stimulation mode.

This can be seen by the upper segment of the mode button that lights up orange.

4Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.

The vacuum and the cycle can be increased using the button or decreased using the button. By pressing the

particular button, the intensity of the vacuum or cycle is changed by one step or bar.

5After two minutes, the stimulation mode switches automatically to the expression mode .

a) If the breast milk starts to ﬂow before this, press the mode button to manually switch to the expression

mode.

b) If the let-down reﬂex has not been triggered after the preset two minutes, press the mode button to extend

the stimulation by another two minutes.

6The breastpump is in expression mode.

This can be seen by the lower segment of the mode button that lights up green.

7Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.

The vacuum and the cycle can be increased using the button or decreased using the button. By pressing the

particular button, the intensity of the vacuum or cycle is changed by one step or bar.

Expressing is most successful if you select the vacuum and cycle settings that are comfortable for you.

8The timer starts automatically when the Ardo Bellis is switched on and continuously displays the

expressing time.

9Massage the breast while expressing. This increases the volume of milk expressed.

10 By holding down the On/Off button , you can switch off the breastpump.

4.4.2 Silent Start

If the Ardo Bellis is switched on but not connected to a pumpset, it runs very quietly without pumping.

When the pumpset is inserted, you can start to express (see Chapter 4.4).

4.5 Memory function—Individual expressing at the touch of a button

You have found your ideal settings when your breast milk ﬂows freely and you can express most successfully. Activating the

memory button saves your expression history. When you next switch the breastpump on, you can automatically express

using the saved expression history in the stimulation mode and then in expression mode. The Ardo Bellis breastpump stops

automatically after the saved time.

You can nevertheless change the values for the vacuum and cycle manually at any time and deﬁne a new time for the length

of the expression history. This takes you out of save mode. When you have ﬁnished expressing, you can save any changes to

the expression history. If you do not save the new values, the previous settings are kept.

Whenever the Memory Plus button is lit up, your expression history is saved and when the breastpump is switched on, it

automatically starts to express using your personal data.

Using the Memory Plus function—step-by-step procedure

1Expressing

Express using your favorite settings.

2Saving an expression history

At the end of your expressing session, press the Memory Plus button to save your individual expression history.

As conﬁrmation, you will hear a tone, the button lights up, and the breastpump automatically switches off.

3Accessing your expression history

Switch the breastpump on. You express straightaway using the saved data. The Memory Plus button ﬂashes

slowly throughout.

Deleting data

You can delete the saved data at any time if you do not want to express with the memory function. By holding down the

Memory Plus button once, the saved data is deleted and the button no longer lights up.

4.6 Power Pumping—Increasing the milk volume

Automatic Power Pumping is a pre-deﬁned one-hour interval pumping program—

expressing three times with two pauses—that aims to increase the volume of milk

you produce. During the pauses you can remove the pumpset and move around

freely.

The operation corresponds to the basic functions (see Chapter 4.4.1). The progress of

the expressing is indicated by the green and white segments that light up.

Power Pumping imitates the natural sucking behavior of babies. There are times—

usually in the evenings—when newborns or older babies want to be breastfed at

10-minute intervals to stimulate milk production (cluster feeding). More information

can be found in Chapter 7.4.

= Expression = Pause

Using the Power Pumping function—step-by-step procedure

Expressing

Switch the breastpump on and press the Power Pumping button.

First expressing phase

The ﬁrst segment of the button starts to light up green and the breastpump starts in stimulation mode. You

can adjust the vacuum and the cycle to what is comfortable for you. After two minutes, Ardo Bellis switches

to the expression mode. Again, you can select the vacuum and cycle that work for you. The color of the

mode button tells you which mode the breastpump is in.

First pause

After 20 minutes a tone sounds and the ﬁrst 10 minute pause starts. The second segment of the button

lights up white. At the end of the pause, a reminder signal sounds.

You then have 5 minutes to press the Power Pumping button and continue expressing (during this time, the

segments ﬂash and a regular beep sounds). Otherwise, the breastpump switches off.

Second expressing phase

Ardo Bellis expresses for 10 minutes. The settings for vacuum and cycle from the ﬁrst expressing phase are

used automatically. However, you can adjust these values at any time to suit your needs.

Second pause

After 10 minutes a tone sounds and the second pause starts (see ﬁrst pause for the sequence).

Third expressing phase

The settings for vacuum and cycle from the second expressing phase are used. However, you can adjust

these values at any time to suit your needs. After 10 minutes the Power Pumping stops and Ardo Bellis

switches off automatically.

The time indicator counts down the speciﬁed time in each phase.

5 Battery operation

• The breastpump has a built-in rechargeable battery. The battery cannot be replaced. The rechargeable battery is

automatically charged when the supplied power adapter is connected to the mains power. The charging time is

about 2 hours.

• If the device is operated while the battery is charging, the charging time is extended. Only use the power adapter and

the USB cable that are supplied with the breastpump.

• It is not necessary to fully charge the rechargeable battery before the ﬁrst use. The device can be operated with mains

power and the rechargeable battery will be charged at the same time during the ﬁrst 5 hours of use.

• You can express about 8 times with a fully charged battery.

• Air travel: The Ardo Bellis has a lithium ion rechargeable battery. Please check if there are national restrictions on carrying

lithium ion batteries when ﬂying.

Charging the rechargeable battery

Insert the USB power adapter into the breastpump and connect it to the mains power.

When charging, the indicator moves from left to right until the battery is fully charged and the three bars light up white.

If the last bar of the battery symbol lights up red, the breastpump needs to be recharged soon.

6 Cleaning / maintenance

Cleaning at home

Disconnect the breastpump from the mains power before cleaning. Wipe the device as needed with a damp cloth and normal

dishwashing liquid. Please follow the safety instructions in Chapter 2.

Cleaning the pumpset

The cleaning instructions for the pumpset are described in the enclosed instructions for use for the

“Pumpset and accessories”.

Reprocessing at the hire center

More detailed information is included in the service instructions.

7 Useful tips for expressing

7.1 Triggeringthelet-downreex

The let-down reﬂex may occur later when expressing than when breastfeeding. The following measures may help the breast

milk to ﬂow in addition to the stimulation mode:

• Relax and think about your baby.

• Look at a video or photo of your baby.

• Massage the breast before expressing.

• Extend the stimulation mode (see Chapter 4.4.1).

• Place a warm compress on the breast before expressing.

7.2 Comfortable settings for vacuum and cycle

What determines the level of the vacuum is your personal well-being and not the maximum vacuum that can be set.

Therefore, express using your comfortable vacuum setting. This will help you to express more breast milk, your breast milk

will ﬂow better, and your nipples will remain intact.

7.3 Combination of massage and expressing

When you massage the breast while using the breastpump, this can increase your milk production and improve the milk ﬂow.

7.4 Increasing the milk volume—Power Pumping

Use the unique automatic Power Pumping function of the Ardo Bellis over one hour (see Chapter 4.6) in addition to your

usual breastfeeding or expressing routine.

• Express from both breasts at the same time if possible. Double pumping increases the milk volume.

• Use the special bra for double pumping or take an old bra and cut out a hole for the breast shells.

• Use the 10 minute pauses to relax, drink a little, eat something, have a shower, read a book, listen to some music, do

small chores around the house, and so on.

• Use the Power Pumping 1–2 times a day.

• It may be that in the ﬁrst few days you can only express a few drops. Don’t worry about this and persevere with the

Power Pumping. By regularly stimulating your breasts, the milk volume will increase. It may take 3–4 days or even longer

until the volume of breast milk increases.

• The expressed breast milk only has to be placed in the refrigerator at the end of the Power Pumping.

7.5 Pain when expressing

Expressing must not be painful. If it hurts, the following possible reasons must be eliminated:

• The vacuum is set too high. Adjust the settings so that they are comfortable for you (see Chapter 7.2).

• The nipples are not centered. Ensure that your nipples are in the middle of the breast shell.

• The funnel of the breast shell does not ﬁt. It is too small or too big. The breast shell size is right if:

- your nipples move freely in the funnel when expressing and track the rhythmical movements of the breastpump

(about 3 mm space between the funnel and the nipple).

- none or only a little bit of the areola is located in the funnel.

- the breast milk ﬂows and the breast feels soft all over after the expressing.

• The breastpump with the pumpset is switched on before positioning the breast shell. As a result, the nipple is difﬁcult

to center.

Order the correct size breast shell from Ardo, your specialist retailer, or your qualiﬁed consultant. Ardo has the following

breast shell sizes in stock: ø 22 / 26 / 28 / 31, and 36 mm (see fold-out page).

8 Troubleshooting

The breastpump barely sucks or does not suck at all

• Ensure that the pumpset has been correctly assembled and is not damaged (see instructions for use for the

“Pumpset and accessories“).

• Check that the pumpset is connected ﬁrmly to the breastpump.

• Check whether the USB cable and the power adapter are correctly attached and connected to the mains power.

If these steps do not resolve the problem, please contact the point of sale, the hire center, or the customer service team at

the manufacturer Ardo medical AG.

9 Spare parts

Ardo Bellis breastpump (body) Art. no. 63.00.521

USB cable with power adapter EU Art. no. 63.00.541

USB cable with power adapter UK Art. no. 63.00.542

USB cable with power adapter US Art. no. 63.00.543

USB cable with power adapter AU Art. no. 63.00.544

USB cable with power adapter CN Art. no. 63.00.545

USB cable with power adapter KR Art. no. 63.00.546

Pumpset See instructions for use for the “Pumpset and accessories”

10 Warranty

The warranty period for the Ardo Bellis breastpump is 1 year after the purchase date; the receipt with the date is considered

to be the certiﬁcate of warranty. The warranty period for the lithium ion rechargeable battery for the Ardo Bellis is 6 months

after the purchase date; the receipt with the date is considered to be the certiﬁcate of warranty.

10.1 General terms and conditions

Ardo medical AG guarantees that the products manufactured by it are free from material and manufacturing defects.

With proper use, any faulty material will be replaced free of charge during the warranty period. To preserve the right to

make any warranty claims and to ensure the ﬂawless function of the device, the instructions for use must be followed

and only accessories from Ardo medical AG are to be used. The warranty coverage will be void if modiﬁcations are made

in or to the device.

11 Technical information / symbols

11.1 Technical data

Pump unit

Vacuum pump type moderate vacuum, low ﬂow rate

Vacuum range at 0–2000 MAMSL 30–330 mbar

Weight 620 g

Battery capacity 2600 mAh

Dimensions 210 × 150 × 90 mm

Protection class Class II

Applied part Class BF

BLE radio frequency band 2.4 GHz ISM

IP protection class IP 22 (protected against solid objects up to 12 mm and protection

against dripping water when the housing is tilted at up to 15°)

Life time of device incl. power adapter 800 hours

Operating conditions +5°C to +40°C

10% to 93% RH

700–1060 hPa

Storage and transport conditions -10°C to +60°C

10% to 93% RH

700–1060 hPa

Power adapter

Input voltage 100–240 V, 50/60 Hz, max. 0.5 A

Output voltage 5 V / 2.0 A (*2.1 A)

Max. cable length 1.5 m

IP protection class IPX0 (no protection against solid objects or water)

Approved models EU: MKC-0502000VEUU (#99.05.025)

EU: XY-0030A (#99.05.025)*

UK: MKC-0502000VUKU (#99.05.026)

UK: XY-0030AUK (#99.05.026)*

US: MKC-0502000VU (#99.05.027)

US: XY-0030A (#99.05.027)*

AU: MKC-0502000VAUU (#99.05.028)

AU: XY-0030AAU (#99.05.028)*

CN: MKC-0502000XXX (#99.05.029)

CN: XY-0030ACN (#99.05.029)*

KR: MKC-0502000XXX (#99.05.030)

KR: XY-0030AKC (#99.05.030)*

11.2 Symbols

Safety instructions / warnings Alternating current

Read and follow the instructions for use Direct current

012

Compliance with valid European regulations for

medical devices Temperature

Manufacturer Air pressure

Device with applied part BF Relative humidity

The device is subject to the provisions of the WEEE

Directive 2002/96/EC Store protected from sunlight

Protection class Keep the packaging away from moisture

Vacuum

Setting for the vacuum (suction level) Cycles Setting for the cycles (suction frequency)

Medical Device

Device complies with the requirements (Part 15)

of the Federal Communications Commission

(FCC)

E358823

MEDICAL – GENERAL MEDICAL EQUIPMENT AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH

ANSI/AAMI ES60601-1 (2005, C1:09, A2:10), CAN/CSA C22.2 No.60601.1 (2008, R:2011)

12 Disposal

The device can be returned to the manufacturer or be dismantled and recycled in an environmentally responsible manner by

a recycling company specializing in electric devices. There are no special or increased risk factors. Waste must be disposed of

in compliance with local regulations.

13 Electromagnetic compatibility

The Ardo Bellis breastpump meets all the relevant requirements for the applicable standards relating to interference

emissions and immunity for operation in medical and domestic environments.

More information about the electromagnetic tests is provided in the chapter “Emission and Immunity Tests” (page 93).

La pagina sta caricando ...

Ardo Bellis Manuale utente

Marca: Ardo

Modello: Bellis

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

français: Ardo Bellis Manuel utilisateur
español: Ardo Bellis Manual de usuario
Deutsch: Ardo Bellis Benutzerhandbuch
Nederlands: Ardo Bellis Handleiding

Ardo Bellis Manuale utente

Ardo Bellis Manuale utente

in altre lingue

Documenti correlati

Altri documenti