ADDER AdderView MP AVMP4-SP specificazione

AdderView MPAdderView MP

Installation and Use

www.addertec.comwww.addertec.com

AdderView MP - Multi-platform KVM switches with multimedia support

Part Model

AVMP4-SP 4 port AdderView MP

(Sun and PC)

AVMP4-SPU 4 port AdderView MP

(Sun, PC and USB)

RC1 Remote control

pad / display

AdderView MP ENGLISH

Quick Installation and Operation Guide

QUICK INSTALLATION

Power off all your computers and connect them to the ORANGE ports on the rear

of the AdderView MP. Adder 3-in-1 keyboard/video/mouse combination cables

are recommended for convenience.

Connect your keyboard, monitor and mouse to the GREY port on the rear of the

AdderView.

OPERATION GUIDE SUMMARY

The AdderView's default configuration is suitable for most systems.

A computer may be selected using the front panel key, a three button mouse or a

keyboard hotkey combination. To select a computer using the mouse press and

release the left or right hand buttons whilst holding down the central button. To

select a computer using the keyboard hotkeys hold down the CTRL and ALT

keys, press and release the required port key (e.g. 1) and then release the CTRL

and ALT keys.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the AdderView MP yourself.

Follow all warnings and instructions marked on the AdderView MP, its optional

power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the AdderView MP, make sure the total

ampere rating of the devices plugged into the extension cord does not exceed the

cord’s ampere rating. Also, make sure that the total ampere rating of all the

devices plugged into the wall outlet does not exceed the wall outlet’s ampere

rating.

GB

USA

AdderView MP GERMAN

Quick-Guide für Installation & Betrieb

QUICK-INSTALLATION

Schalten Sie alle Ihre Computer aus, und schließen Sie sie an die ORANGEFARBENEN

Ports auf der Rückseite des AdderView MP an. Wir empfehlen der Einfachheit halber die

Verwendung der Adder 3-in-1 Tastatur/Video/Mauskabel, es sind in der Regel jedoch

auch geeignete einzelne Standardmaus-, Video- und Tastaturkabel überall im Handel

erhältlich.

Schließen Sie Ihre Tastatur, Monitor und Maus an den GRAUEN Port auf der Rückseite

des AdderView an.

ZUSAMMENFASSUNG DES BETRIEBS-GUIDES

Die Vorgabekonfiguration des AdderView ist für die meisten Systeme geeignet.

Ein Computer kann für entweder die Verwendung der Taste auf der Frontanzeige, einer

Maus mit drei Tasten oder einer Kombination der Hot-Keys der Tastatur ausgewählt

werden. Zur Auswahl eines Computers, der eine Maus verwendet, die linke oder rechte

Taste kurz drücken, während die mittlere Taste gedrückt gehalten wird. Um einen

Computer auszuwählen, der die Hot-Keys der Tastatur verwendet, die Strg und ALT

Tasten zusammen gedrückt halten, und die erforderliche Port-Taste (z.B. 1) drücken und

loslassen, und dann die Strg und ALT Tasten loslassen.

Sicherheitstechnische Informationen

Nur für den Gebrauch innerhalb von trockenen, ölfreien Räumen vorgesehen.

Die Wartung des AdderView MP darf nur ausschließlich von dazu qualifiziertem

Fachpersonal vorgenommen werden.

Sämtliche Warnhinweise und Anweisungen auf dem AdderView MP, seinem optionalen

Stromadapter und Zubehörteilen beachten und befolgen.

Warnung – im Stormadapter sind unter Spannung stehende Teile enthalten.

Keine vom Benutzer zu wartenden Teile im optionalen Stromadapter enthalten – nicht

auseinandernehmen.

Den optionalen Stromadapter nur durch einen vom Hersteller zugelassenen Typ

ersetzen.

Bei Verwendung eines Stromverlängerungskabels für den AdderView MP, muss darauf

geachtet werden, dass die Gesamtamperezahl der an dieses Kabel angeschlossenen

Geräte nicht den Amperenennwert des Kabels übersteigt. Auch darauf achten, dass die

Gesamtamperezahl aller an die Steckdose angeschlossenen Geräte nicht den

Amperenennwert der Steckdose überschreitet.

D

AdderView MP SPANISH

Guía rápida de instalación y funcionamiento

INSTALACIÓN RÁPIDA

Desconecte todos los ordenadores y conéctelos a los puertos NARANJA en la parte

posterior del AdderView MP. Para mayor comodidad se recomiendan cables combinados

3-en-1 teclado/vídeo/ratón.

Conecte el teclado, el monitor y el ratón al puerto GRIS en la parte posterior del

AdderView.

RESUMEN DE LA GUÍA DE FUNCIONAMIENTO

La configuración por defecto del AdderView es adecuada para la mayoría de los

sistemas.

Puede seleccionarse un ordenador utilizando la tecla del panel frontal, un ratón de tres

botones o una combinación de teclas rápidas en el teclado. Para seleccionar un

ordenador utilizando el ratón, pulse y suelte los botones izquierdo o derecho mientras

mantiene pulsado el botón del medio. Para seleccionar un ordenador utilizando las teclas

rápidas del teclado, mantenga pulsadas las teclas CTRL y ALT, pulse y suelte la tecla del

puerto requerida (p.e. 1) y a continuación suelte las teclas CTRL y ALT.

Información sobre seguridad

Solamente debe usarse en interiores, en entornos secos y sin grasa.

No intente realizar ningún tipo de mantenimiento al AdderView MP usted mismo.

Siga todos los avisos e instrucciones marcadas en el AdderView MP, el adaptador de

potencia opcional y todos sus accesorios.

Aviso – el adaptador de potencia opcional tiene piezas con tensión.

El adaptador de potencia opcional no contiene piezas que pueda mantener el usuario –

no desmontarlo.

Cambie el adaptador de potencia opcional solamente con un tipo aprobado por el

fabricante.

Si utiliza una cable de extensión con el AdderView MP, compruebe que el amperaje

nominal total de los equipos enchufados en el cable de extensión no superen el amperaje

nominal del cable de extensión. Asimismo, compruebe que el amperaje nominal total de

todos los equipos conectados a la toma de red no superen el amperaje nominal de la

toma.

E

AdderView MP FRENCH

Guide d'installation rapide et mode d'emploi

INSTALLATION RAPIDE

Mettez tous vos ordinateurs hors tension et raccordez-les aux ports ORANGE à l'arrière

d'AdderView MP. Les câbles clavier/vidéo/souris Adder 3-in-1 sont recommandés pour

des raisons pratiques.

Raccordez votre clavier, moniteur et souris au port GRIS à l'arrière de l'AdderView.

MODE D'EMPLOI SOMMAIRE

La configuration par défaut de l'AdderView convient à la plupart des systèmes.

Pour sélectionner un ordinateur, utilisez la touche du panneau avant, une souris à trois

boutons ou une combinaison de touches de raccourci clavier. Pour sélectionner un

ordinateur à l'aide de la souris, maintenez la pression sur le bouton central et appuyez

sur le bouton gauche ou droite avant de relâcher. Pour sélectionner un ordinateur avec

les touches de raccourci clavier, maintenez les touches CTRL et ALT enfoncées,

appuyez sur la touche du port souhaité (ex. 1) et relâchez, puis relâchez les touches

CTRL et ALT.

Consignes de sécurité

A n'utiliser qu'à l'intérieur, dans un environnement sec et exempt d'huile.

Ne pas assurer soi-même l'entretien de l'AdderView MP.

Observer tous les avertissements et instructions marqués sur l'AdderView MP, son

adaptateur de courant optionnel et ses accessoires.

Avertissement – l'adaptateur de courant optionnel renferme des pièces sous tension.

L'adaptateur de courant optionnel ne contient aucune pièce devant être révisée par

l'utilisateur – ne pas le démonter.

Ne remplacer l'adaptateur de courant optionnel que par un adaptateur approuvé par le

fabricant.

Lorsqu'une rallonge est utilisée pour l'AdderView MP, vérifier que l'intensité nominale

totale des périphériques branchés sur la rallonge ne dépasse pas l'intensité nominale du

câble. Par ailleurs, vérifier que l'intensité nominale totale de tous les périphériques

branchés sur la prise murale ne dépasse pas l'intensité nominale de la prise murale elle-

même.

F

AdderView MP ITALIAN

Guida di installazione rapida e funzionamento

INSTALLAZIONE RAPIDA

Spegnere tutti i computer e collegarli alle porte ARANCIONI sul retro

dell’AdderView MP. Per facilità consigliamo i cavi Adder combinati 3-in-1

tastiera/video/mouse.

Collegare la tastiera, monitor e mouse alla porta GRIGIA sul retro dell’AdderView.

SOMMARIO GUIDA OPERATIVA

La configurazione di default dell’AdderView è adatta alla maggior parte dei

sistemi.

Si può selezionare un computer usando il tasto sul pannello frontale, un mouse a

tre bottoni o una tastiera con tasti attivi. Per selezionare un computer con il

mouse, premere e rilasciare i bottoni sinistro o destro trattenendo

contemporaneamente quello centrale. Per selezionare un computer con tasti attivi

tastiera, tener premuti i tasti CTRL e ALT, premere e rilasciare il tasto porta

richiesta (es. 1) e quindi rilasciare i tasti CTRL e ALT.

Informazionoi riguardanti la sicurezza

Da usare esclusivamente in interni asciutti e privi di olio.

Non cercare di effettuare manutenzione sull’AdderView MP.

Seguire tutti gli avvertimenti ed istruzioni presenti sull’AdderView MP, sull’adattatore

opzionale di potenza e sugli accessori.

Attenzione – l’adattatore opzionale di potenza contiene parti sotto tensione.

L’adattatore opzionale di potenza non contiene parti soggette a manutenzione da parte

dell’utente – non smontarlo.

Sostituire l’adattatore opzionale di potenza solo con uno di tipo approvato dal produttore.

Se si usa una prolunga con l’AdderView MP, controllare che la potenza nominale totale in

ampère dei dispositivi collegati alla prolunga non superi la potenza nominale in ampère

della prolunga stessa. Controllare inoltre che la potenza nominale totale in ampère dei

dispositivi collegati non superi la potenza nominale in ampère della presa a muro.

I

AdderView MP

AdderView MP Installation and Use Page 1

About this manual

AdderView MP - Installation and Use

Part No. ADD0037/3 www.addertec.com

manual, Adder Technology Ltd assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information

contained herein. We reserve the right to change the specifications, functions and

circuitry of the product without notice. All trademarks acknowledged.

Safety information

For use in dry, oil free indoor environments only.

Do not attempt to service the AdderView MP yourself.

Follow all warnings and instructions marked on the AdderView MP, its optional

power adapter and its accessories.

Warning - live parts contained within optional power adapter.

No user serviceable parts within optional power adapter - do not dismantle.

Replace the optional power adapter with a manufacturer approved type only.

If you use a power extension cord with the AdderView MP, make sure the total

ampere rating of the devices plugged into the extension cord does not exceed

the cord’s ampere rating. Also, make sure that the total ampere rating of all the

devices plugged into the wall outlet does not exceed the wall outlet’s ampere

rating.

AdderView MP Installation and Use Page 2

Warranty

Adder Technology Ltd warrants that this product shall be free from defects in

workmanship and materials for a period of one year from the date of original

purchase. If the product should fail to operate correctly in normal use during the

warranty period, Adder will replace or repair it free of charge. No liability can be

accepted for damage due to misuse or circumstances outside Adder’s control. Also

Adder will not be responsible for any loss, damage or injury arising directly or

indirectly from the use of this product. Adder’s total liability under the terms of this

warranty shall in all circumstances be limited to the replacement value of this

product.

If any difficulty is experienced in the installation or use of this product that you are

unable to resolve, please contact your supplier.

Trademarks

All trademarks mentioned in this manual are acknowledged to be the property of the

respective trademark owners.

Adder is a registered trademark of Adder Technology Limited.

Compaq is a registered trademark of Compaq Computer Corporation.

Hewlett-Packard is a registered trademark of Hewlett-Packard.

IBM, PC/AT, PS/2, RS/6000 and ThinkPad are registered trademarks of

International Business Machines Corporation.

Logitech, MouseMan+ and Pilot Mouse+ are trademarks of Logitech Inc.

Microsoft and Windows are registered trademarks, and IntelliMouse is a trademark

of Microsoft Corporation.

Velcro is a trademark of Velcro USA Inc.

AdderView MP Installation and Use Page 3

Radio Frequency Energy

Shielded cables must be used with this equipment to maintain compliance with radio

frequency energy emission regulations and ensure a suitably high level of immunity

to electromagnetic disturbances.

European EMC directive 89/336/EEC

This equipment has been tested and found to

comply with the limits for a class A computing

device in accordance with the specifications in

the European standard EN55022. These limits

are designed to provide reasonable protection

against harmful interference. This equipment

generates, uses and can radiate radio frequency

energy and if not installed and used in

accordance with the instructions may cause

harmful interference to radio or television

reception. However, there is no guarantee that

harmful interference will not occur in a particular

installation. If this equipment does cause

interference to radio or television reception,

which can be determined by turning the

equipment on and off, the user is encouraged to

correct the interference with one or more of the

following measures: (a) Reorient or relocate the

receiving antenna. (b) Increase the separation

between the equipment and the receiver. (c)

Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected. (d) Consult the supplier or an

experienced radio / TV technician for help.

FCC Compliance Statement (United States)

This equipment generates, uses and can radiate

radio frequency energy and if not installed and

used properly, that is, in strict accordance with

the manufacturer’s instructions, may cause

interference to radio communication. It has been

tested and found to comply with the limits for a

class A computing device in accordance with the

specifications in Subpart J of part 15 of FCC

rules, which are designed to provide reasonable

protection against such interference when the

equipment is operated in a commercial

environment. Operation of this equipment in a

residential area may cause interference, in

which case the user at his own expense will be

required to take whatever measures may be

necessary to correct the interference. Changes

or modifications not expressly approved by the

manufacturer could void the user’s authority to

operate the equipment.

Canadian Department of Communications

RFI statement

This equipment does not exceed the class A

limits for radio noise emissions from digital

apparatus set out in the radio interference

regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de

bruits radioélectriques dépassant les limites

applicables aux appareils numériques de la

classe A prescrites dans le règlement sur le

brouillage radioélectriques publié par le

ministère des Communications du Canada.

AdderView MP Installation and Use Page 4

Contents

1. Introduction.................................................................................... 6

1.1 Key features...........................................................................................6

1.2 Package contents ..................................................................................8

1.3 Remote controller contents....................................................................8

1.4 Product information ...............................................................................9

2. Installation...................................................................................... 11

2.1 What you will need ................................................................................11

2.2 Mounting the AdderView MP .................................................................13

2.3 Connecting your devices .......................................................................13

2.4 ‘Interface powered' operation without the optional power adapter ........16

2.5 Configuring your PCs ............................................................................16

2.6 Configuring the AdderView MP .............................................................16

2.7 Summary of AdderView MP configuration options.................................18

2.8 Resetting the AdderView MP without disconnecting your devices.........20

2.9 Other useful installation information ......................................................20

2.10 Re-enabling a disconnected PS/2 mouse ...........................................21

2.11 Hot plugging the AdderView MP into running systems and

re-enabling disconnected PS/2 CPU mouse connections ...................21

2.12 Upgrading the AdderView's flash memory ..........................................23

3. Using the AdderView MP ............................................................. 27

3.1 Power on status .....................................................................................27

3.2 Front panel keys and remote controller..................................................27

3.3 Status display.........................................................................................28

3.4 Keyboard hotkey control ........................................................................29

3.5 Mouse control.........................................................................................30

AdderView MP Installation and Use Page 5

4. AdderView MP configuration options.......................................... 32

4.1 Screen saver time delay ........................................................................32

4.2 Autoscan lock on mode and delay time ................................................32

4.3 Mouse mode and mouse switching of channels ....................................33

4.4 Keyboard hotkey combination ...............................................................34

4.5 Cycling between all channels or just the active channels .....................35

4.6 Firmware functions (version query, mouse restore and reset) ..............35

4.7 Setting a security password ..................................................................36

4.8 Cascade query code .............................................................................37

4.9 Resolving slow mouse problems ...........................................................37

4.10 Sun keyboard type ..............................................................................38

4.11 Using the Sun keyboard's "hot media" keys to select computers .......38

4.12 Customising the Sun keyboard operation to force the

generation of a £ ..................................................................................38

4.13 Exit configure mode ............................................................................38

Appendices

A - Cable and connector specifications................................................................39

B - Problem solving ..............................................................................................46

AdderView MP Installation and Use Page 6

1. Introduction

Thank you for purchasing the AdderView MP. Your AdderView MP is a very high

performance multi-platform keyboard, monitor and mouse sharing device which

supports a wide range of computer hardware and software platforms. Stereo

speaker and microphone connections add further to the AdderView's versatility by

enabling you to control several multimedia computers from a single console. Your

AdderView intelligently handles the conversions between various hardware

standards so that you can use a single keyboard and mouse of your choice to

control a diverse mixture of computers. A range of useful features and functions

have been provided to enhance the easy of use of this product and we trust that you

will enjoy using it.

1.1 Key features

Control multiple computers from a single console (keyboard, mouse, monitor,

stereo speakers and microphone).

Connects to computers with Sun (8-pin) or PC (6-pin) style keyboard and mouse

connections.

SPU models also connect to computers with USB keyboard and mouse

connections.

All models support Sun or PC style keyboards and mice.

Automatic "seemless" conversion between different hardware platforms.

Channel switching by front panel key, keyboard hotkey, 3 button mouse or Sun

keyboard "hot media" keys.

"All-in-one" colour coded cables provide a very neat installation with excellent

video quality.

Supports a very wide range of software including Windows

®

3.X, WFWG, 95, 98,

2000, ME, XP, NT, DOS, Unix, Linux

®

, Novell

®

NetWare

®

, OS/2, BSD, Solaris,

Mac OS (8.6 and higher).

Automatic detection of the connected hardware.

AdderView MP Installation and Use Page 7

Continuous keyboard and mouse emulation on all ports ensures problem free

computer bootup.

On SPU models, continuous USB device emulation ensures reliable and quick

switching without having to wait several seconds for the USB bus to enumerate.

Interface powered operation – AdderView MP draws its power from the connected

computers for maximum convenience.

Intelligent switching feature enables users to switch between all ports or just the

active ports.

Stereo audio and microphone support makes MP ideal for multimedia

applications.

"Clickless" audio switching ensures that the speakers don't "thump" every time

that you switch channels.

Supports high bandwidth monitors at resolutions up to 1900 x 1440 with an

excellent video transfer characteristic - high bandwidth and low distortion.

RS232 mice supported as standard.

Flash upgradeable - AdderView MP's firmware may be upgraded by connecting a

computer's serial port and running a download program.

Video channels support Display Data Channel (DDC/DDC1/DDC2) signalling.

Password security prevents unauthorised use.

User options stored in EEPROM memory.

Remote control module for convenient operation.

Sun keyboard remap feature to force generation of £ key.

Automatically restores keyboard and mouse states when channel changed.

Supports mouse prompt and stream modes for maximum compatibility.

Includes screen saver, auto-scan and variable hotkey options.

Supports Microsoft IntelliMouse and other common wheel mice.

Allows mixtures of controlling devices such as a Sun keyboard with a PC style

PS/2 mouse.

Mouse restoration functions to enable ‘hot plugging’ of certain systems.

AdderView MP Installation and Use Page 8

Keyboard, mouse and AdderView MP resets may be performed without

disconnecting devices.

Supports IBM ThinkPad ‘Y’ cables.

Power and activity indication confirm correct operation.

All ports are active simultaneously – all computers may all be booted at the same

time.

Keyboard data flowing through the AdderView is kept in its "native" format which

enables the additional keys on enhanced keyboards to be supported.

Robust metal case ensures good shielding and video quality.

All models support desktop and laptop PCs, Sun (8-pin style), RS6000s, DEC

Alphas, and Silicon Graphics.

SPU models additionally support Sun (USB style), desktop and laptop PCs (USB

style) and Apple (USB style).

Optional power adapter can be used for ‘video only’ or cascade applications.

1.2 Package contents

AdderView MP.

This installation guide.

(Please note that a power adapter is NOT required for most applications and so is

not included. This may be purchased separately if required - part code

AVGPSU).

1.3 Remote controller contents (part code: RC1)

Remote control module.

Velcro strip for mounting remote controller.

AdderView MP Installation and Use Page 9

1.4 Product information

Figure 1 - AdderView MP front view

Figure 2 - AdderView MP rear view (SP and SPU models)

AdderView MP Installation and Use Page 10

Figure 3 - Remote control pad / display (optional accessory - part RC1)

Figure 4 - Rear view of AdderView MP

AdderView MP Installation and Use Page 11

2. Installation

2.1 What you will need

Cables to connect the AdderView MP to each of your computers. These cables

are specially constructed for use with the AdderView MP and may be purchased

from your AdderView MP supplier. Cable specifications and part codes are given in

appendix A.

A suitable keyboard. Supported types are:

1) A Sun keyboard with an 8 pin mini-DIN connector (recommended if you are

going to connect any Sun computers to the MP).

2) A standard PC style keyboard with a 6 pin mini-DIN PS/2 style connector.

3) A standard PC style keyboard with a 5 pin DIN connector and an AT to PS/2

keyboard adapter (5 pin DIN to 6 pin mini-DIN)

A suitable mouse. If you wish to use the mouse to switch the AdderView MP's

channel then you will need a three button mouse or an IntelliMouse. Supported

types are:

1) A standard PC style two or three button Microsoft

or Logitech

compatible

mouse or a Microsoft IntelliMouse compatible mouse with a 6-pin mini-DIN

connector.

2) A Sun mouse of the type that plugs into the Sun keyboard. This should have

an 8 pin mini-DIN connector.

A monitor with a standard VGA/SVGA (15 pin) connector that will work when

connected directly to each of your computers. AdderView MP supports low and high

resolution monitors. If you have a monitor with a 13 pin 13W3 connector of the type

that was traditionally used to connect to older Sun computers then you will need an

adapter to convert this to the 15 pin format - please contact your AdderView MP

supplier.

AdderView MP Installation and Use Page 12

You may also need one or more of the following adapters. These adapters may

be obtained from your AdderView MP supplier and other good retailers.

Video adapter - 13W3 male connector to 15 pin D-type connector

(Adder part code: VSA7)

If you have a Sun computer with an older style 13W3 video connector then you

will need an adapter to convert this to the 15 way D-type format.

Keyboard adapter - 6 pin mini-DIN female to 5 pin standard DIN male

(Adder part code: VSA2)

If you have a PC with an older style 5 pin standard DIN connector then you will

need an adapter to convert this to the 6 pin mini-DIN format.

Mouse adapter - 9 pin D-type female to 6 pin mini-DIN female

(Adder part code: VSA1)

If you have a PC with an older style RS232 mouse connection then you will need

an adapter to convert this to the 6 pin mini-DIN format. There are several

specifications of these adapters that are provided with various mice. They all look

the same but unfortunately there are several common wiring schemes all of

which are different. To ensure that you have the right adapter, either purchase

this from your AdderView MP supplier or check your adapter against the wiring

specification given in Appendix A.

If you are connecting to PCs then you will need a suitable mouse driver.

Supported types are:

1) A PS/2 or RS232 two button mouse driver (any manufacturer).

2) Microsoft mouse driver (including IntelliMouse).

3) Logitech mouse driver (including two button, three button and wheel mouse).

4) A mouse driver that is compatible with the above types (most are).

(The AdderView MP supports ‘Internet Mice’ that are compatible with the Microsoft

IntelliMouse. These are fitted with a wheel or other scroll control and sometimes

have additional buttons. Examples are: Microsoft IntelliMouse, Logitech Pilot

Mouse+, Logitech MouseMan+, Genius NetMouse and Genius NetMouse Pro.)

Use of PS/2 and RS232 style mice with the AdderView MP - All of the mouse

connections from AdderView MP to PCs support either a PS/2 or an RS232 mouse.

AdderView MP automatically converts from the PS/2 mouse commands to RS232

AdderView MP Installation and Use Page 13

serial mouse commands. Serial mice types are selected by using an adapter as

described in Appendix A. The AdderView MP will operate without a mouse

connected if you do not wish to use one.

2.2 Mounting the AdderView MP

The AdderView MP has been designed for use on a desktop or shelf in close

proximity to the user’s monitor and peripherals. The optional remote controller may

be used if you wish to locate the AdderView MP on a desk or shelf that is some

distance from the monitor and peripherals.

2.3 Connecting your devices

Ensure that the optional power adapter is disconnected from the AdderView MP and

that all the devices which are to be attached are switched off. Connect the shared

keyboard, mouse, monitor, speakers and microphone to the connectors at the rear

of the AdderView MP (see figs 1, 2 and 3). If you are using a Sun keyboard with an

8 pin DIN connector then plug the keyboard into the MP and the mouse into the

keyboard. You may leave any unused ports disconnected if you don't wish to use all

these devices.

Next, connect each computer system unit in turn using the Adder interface cables

that you have purchased for use with the AdderView MP (see Appendix A for cable

specifications and part codes). These are colour coded and should connect directly

to the various ports on your computers. The three main cables type are shown in

figure 5. These cables are available with or without the audio connectors. Any

unused computer connections can be left unconnected.

La pagina sta caricando ...

ADDER AdderView MP AVMP4-SP specificazione

Questo manuale è adatto anche per

ADDER AdderView MP AVMP4-SP specificazione

in altre lingue

Documenti correlati

Altri documenti