Schalten Sie den “Netzschalter”, auf der Rückseite des Geräts“ in die “ON” Position.

Legen Sie den “Funktionsschalter” in die gewünschte Position um eine Quelle zu wählen.

Legen Sie den “Funktionsschalter” in die “TAPE” Position (Keine Kassettentaste betätigen) um

Schalten Sie den “Netzschalter”, auf der Rückseite des Geräts, in die „OFF“ Position.

„UKW/DAB“ Umschaltung in die "DAB" Position und drehen Sie den Lautstärkeregler auf eine für

„DAB Dynamic Range Control“ (wenn vom Sender unterstütz) ermöglicht die Anpassung der

verfügbare Sender sind mit einem „?“ markiert.

● Uhrzeit

● Datum

“Progr. Aufrufen”. Wählen Sie mithilfe der "DOWN/UP" Tasten den gewünschten Festsender und

bestätigen Sie mit „ENTER“. Der Sender wird nun abgespielt.

Stellen Sie den „Funktionsschalter“ auf die Position „FM/DAB”.

empfohlen auf „FM-Mono“ zu wechseln.

Drücken Sie die “STOP” Taste, drücken Sie die "PROG" Taste, im Bildschirm wird "MEM"

This function will clear the invalid stations, that is, the invalid stations marked with '?' in the

program list

Move the function switch to the "CD" position.

Press the "OPEN/CLOSE" position, open the CD door, put the disc printing side up on the

spindle of the CD movement, and then close the CD door.

After a few seconds, the total track will be read, and automatically play the first music, LCD will

To stop playing in the middle: press the "STOP" button to stop playing

When playing a CD: single press "<<" will skip to the previous song, long press "<<" for fast

rewind function; single press ">>" will skip to the next song, long press ">>" for fast forward

function

When playing a CD:

Press the "REP" button repeatedly for following options:

After programming, press the “ ”button to play in the programmed order, press the “STOP”

button during programming to stop programming, and exit the programming state

switch to the normal play state

When the unit is no longer in the CD playback function, the previous programming will cancel

itself

Never use record cleaning spray, benzine, thinner, antistatic fluid, or any other solvents for

*Discs exposed due to removal of stickers or labels

*Badly warped or cracked discs

Turn the function switch to the "TAPE" position.

Put the music tape with the opening downwards into the tape compartment, close the door and

press the "PLAY" cassette button.

If you need to fast forward or rewind, press "FFWD " button or "REW" button.

If you need to pause the playback, you can press the "PAUSE" pause button, if you press the

"PAUSE" pause button again during the pause, you can resume playback.

If you want to stop playing, press " STOP/EJ "button to stop playing

For removing the tape press "STOP/EJ" again for opening the tape compartment

BLUETOOTH

Move the function switch to the "Bluetooth/USB/SD/AUX" position, the LCD screen will display

the word "PAIR".

flashes on the LCD screen.

" " button again to continue playback. Press "<<" to skip to the previous song; press ">> " to

skip to the next song.

Move the function switch to the "Bluetooth/USB/SD/AUX" position, press the "MODE" button to

switch among the three functions of BT/USB/SD.

When switching to USB or Micro SD card, the LCD screen will display the corresponding words

"USB or SD".

After inserting the USB or Micro SD, the track will be played automatically, single press the " "

play/pause button to pause playback, press again to continue playing.

Single press "<<" to skip to the previous song, long press "<<" for fast rewind function; single

press ">>" to skip to next song, press and hold ">>" for fast forward function.

When selecting a track, the LCD screen will display the track for 3 seconds and then display the

playing time.

card.

"DEL" button during recording is to stop recording, and a recording file in MP3 format will be

generated. If you want to delete the recording file, you need to play the current file to be deleted

long press the "DEL" button, the LCD screen will display "DELE" to delete the currently playing

file.

* If USB and Micro SD exist at the same time, USB will be recorded first

In the BT/USB/Micro SD function state, after plugging in the AUX cable, the LCD screen will

display the word "AUX" and switch to the AUX function.

decrease the external MIC volume.

to decrease the reverberation echo effect.

1. Long press the "STOP" button in the power-on state to enter the manual time and date setting.

2. When the LCD displays 12H or 24H, select the time display format through "DOWN/UP", and

In DAB mode

Press "MENU" to enter system settings

System menu settings include: Language, Factory Reset, SW Version.

Press the "DOWN/UP" button to rotate the next menu, press "ENTER" to enter the menu.

Automatically exit to the program interface when there is no operation for 30s.

select to enter the language setting interface, the default is English, the selected language

restored after reset to factory default.