Datalogic Memor Manuale utente

Datalogic Memor™

05/09

822000882

www.mobile.datalogic.com

Datalogic Mobile S.r.l.

Via S. Vitalino, 13

40012 Lippo di Calderara di Reno

Bologna - Italy

Telephone: (+39) 051-3147011

Fax: (+39) 051-3147561

World wide Sales Network

available from: www.mobile.datalogic.com/contacts

User’s Manual

Datalogic Mobile S.r.l.

Via S. Vitalino 13

40012 - Lippo di Calderara di Reno

Bologna - Italy

Datalogic Memor™ - User's Manual

Software Version: 4.00

Ed.: 05/2009

The Datalogic name and logo are registered trademarks of Datalogic S.p.A. in many

countries.

The Memor name is a trademark of Datalogic Mobile S.r.l.

All other brand and product names mentioned herein are for identification purposes only

and may be trademarks or registered trademarks of their respective owners.

Datalogic reserves the right to make modifications and improvements without prior

notification.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein,

nor for incidental or consequential damages resulting from the use of this material.

under U.S. and international laws. • Copying, or altering of this document is prohibited

without express written consent from Datalogic Mobile S.r.l.

CONTENTS

REFERENCES.....................................................................................v

Conventions .........................................................................................v

Reference Documentation ...................................................................v

Services and Support...........................................................................v

SAFETY REGULATIONS...................................................................vi

General Safety Rules..........................................................................vi

Power Supply......................................................................................vi

Laser Safety.......................................................................................vii

LED Class .........................................................................................xiii

Radio Compliance.............................................................................xiii

FCC Compliance................................................................................xv

SAR Compliance...............................................................................xvi

Patents..............................................................................................xvi

WEEE Compliance...........................................................................xvii

China RoHS Pollution Control Logos................................................xix

GENERAL VIEW............................................................................... xx

1 INTRODUCTION................................................................................. 1

1.1 Datalogic Memor™ Description ..........................................................1

1.2 Models Description..............................................................................2

1.3 Package Contents...............................................................................4

1.4 Inserting a Micro SD Card...................................................................5

1.5 Installing the SIM Card........................................................................7

1.5.1 Removing the SIM Card......................................................................9

1.6 Accessories.......................................................................................10

1.7 Operating System..............................................................................10

2 CONNECTIONS................................................................................ 11

2.1 USB Connection................................................................................11

2.2 Connection to USB peripherals.........................................................13

2.3 RS232 Connection............................................................................15

2.4 WLAN Connection.............................................................................16

2.5 WPAN Connection............................................................................18

2.6 WWAN Connection...........................................................................19

2.7 Connection Cables............................................................................21

2.8 Wireless and Radio Frequencies Warnings......................................22

3 USE AND FUNCTIONING................................................................ 24

3.1 Startup...............................................................................................24

3.1.1 Using the Stylus ................................................................................26

3.1.2 Using the Joystick.............................................................................27

3.2 Windows Mobile Welcome Wizard.................................................... 28

3.3 Data Capture.....................................................................................29

3.3.1 Laser Data Capture...........................................................................29

3.3.2 Imager Data Capture.........................................................................30

3.4 Description of the Keys.....................................................................32

3.4.1 Resetting the Memor™ .....................................................................34

iii

3.5

Status Indicators ...............................................................................37

3.5.1 LED Status........................................................................................37

3.5.2 Taskbar .............................................................................................38

3.6 Data Capture Configuration...............................................................40

3.6.1 Configure...........................................................................................40

3.6.2 Capture..............................................................................................45

3.7 Control Panel ....................................................................................46

3.7.1 Buttons..............................................................................................47

3.7.2 Registry.............................................................................................48

3.7.3 Files Admin .......................................................................................49

3.7.4 Wireless Communications.................................................................51

3.7.5 Stylus Calibration..............................................................................53

3.7.6 Volume Settings................................................................................56

3.8 Windows Connections.......................................................................60

3.8.1 Microsoft® ActiveSync®....................................................................60

3.8.2 Bluetooth® Manager Device Setup................................................... 62

3.8.3 Windows Mobile Phone.....................................................................71

3.8.4 FTP Server Setup..............................................................................72

3.9 Backup Directory File Management..................................................73

3.10 Firmware Update...............................................................................73

4 MAINTENANCE................................................................................ 74

4.1 Charging the Battery Pack ................................................................74

4.2 Replacing the Battery Pack...............................................................76

4.3 Cleaning the Mobile Computer..........................................................80

5 TECHNICAL FEATURES ................................................................. 81

5.1 Technical Data..................................................................................81

5.2 Reading Diagram ..............................................................................84

6 TEST CODES ................................................................................... 85

GLOSSARY...................................................................................... 89

INDEX ............................................................................................... 91

iv

REFERENCES

CONVENTIONS

This manual uses the following conventions:

“User” refers to anyone using a Datalogic Memor™ mobile computer.

“Mobile computer” and "Datalogic Memor™" refer to Datalogic Memor™ mobile

computer.

“You” refers to the System Administrator or Technical Support person using this

manual to install, configure, operate, maintain or troubleshoot a Datalogic

Memor™ mobile computer.

“Single Cradle” refers to the Datalogic Memor™ Single Cradle.

REFERENCE DOCUMENTATION

For further information regarding Datalogic Memor™ refer to the SDK Help on-Line.

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its

website.

Log on to www.mobile.datalogic.com and click on the links

indicated for

further information including:

- PRODUCTS

Search through the links to arrive at your product page where you can

download specific Manuals

and Software & Utilities

- SERVICES & SUPPORT

- Datalogic Services Warranty Extensions and Maintenance

Agreements

- Authorised Repair Centres

- CONTACT US

E-mail form and listing of Datalogic Subsidiaries

v

SAFETY REGULATIONS

NOTE

Read this manual carefully before performing any type of

connection to the Datalogic Memor™ mobile computer.

The user is responsible for any damages caused by incorrect

use of the equipment or by inobservance of the indication

supplied in this manual.

GENERAL SAFETY RULES

− Use only the components supplied by the manufacturer for the specific

Datalogic Memor™ being used.

− Do not attempt to disassemble the Datalogic Memor™ mobile computer,

as it does not contain parts that can be repaired by the user. Any

tampering will invalidate the warranty.

− When replacing the battery pack or at the end of the operative life of the

Datalogic Memor™ mobile computer, disposal must be performed in

compliance with the laws in force.

− Before using the devices and the battery packs, read par. 4.2.

− Do not submerge the Datalogic Memor™ in liquid products.

− For further information, refer to this manual and to the Datalogic Mobile

web site:

www.mobile.datalogic.com.

POWER SUPPLY

This device is intended to be connected to a UL Listed/CSA Certified computer

which supplies power directly to the Datalogic Memor™ or else be supplied by a

UL Listed/CSA Certified Power Unit marked “Class 2” or LPS power source

rated 5 V, 3.0 A, which supplies power directly to the Datalogic Memor™ via the

power connector of the cable.

The package includes three international plug adapters. The adapters must be

plugged in the power supply before the power supply itself is plugged on the

wall outlet.

vi

LASER SAFETY

The laser light is visible to the human eye and is emitted from the window

indicated in the figure.

This information applies to both laser models and the Datalogic Memor™

Imager Aiming System.

Laser output window

vii

I D F E

La luce laser è

visibile all'occhio

umano e viene

emessa dalla

finestra indicata

nella figura.

Die Laserstrahlung

ist für das

menschliche Auge

sichtbar und wird am

Strahlaustrittsfenster

ausgesendet (siehe

Bild).

Le rayon laser est

visible à l'oeil nu et il

est émis par la

fenêtre désignée sur

l'illustration dans la

figure.

La luz láser es

visible al ojo

humano y es

emitida por la

ventana indicada

en la figura.

LUCE LASER

NON FISSARE IL

FASCIO

APPARECCHIO

LASER DI CLASSE 2

MASSIMA POTENZA

DI USCITA: 1.7mW

LUNGHEZZA D'ONDA

EMESSA: 650nm

CONFORME A EN

60825-1 (2001)

LASERSTRAHLUNG

NICHT IN DER STRAHL

BLINKEN

PRODUKT DER

LASERKLASSE 2

MAXIMALE

AUSGANGLEISTUNG:

1.7mW

WELLENLÄNGE:

650nm

ENTSPR. EN 60825-1

(2001)

RAYON LASER

EVITER DE

REGARDER

LE RAYON

APPAREIL LASER DE

CLASSE 2

MAXIMUM PUISSANCE

DE SORTIE: 1.7mW

LONGUER D'ONDE

EMISE: 650nm

CONFORME A EN

60825-1 (2001)

RAYO LÁSER

NO MIRAR FIJO EL

RAYO

APARATO LÁSER DE

CLASE 2

MÁXIMA POTENCIA

DE SALIDA: 1.7mW

LONGITUD DE ONDA

EMITIDA: 650nm

CONFORME A EN

60825-1

(2001)

viii

ENGLISH

The following information is provided to comply with the rules imposed by

international authorities and refers to the correct use of your mobile computer.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of both CDRH 21 CFR

1040 Subchapter J and EN 60825-1:2001 at the date of manufacture.

For installation, use and maintenance, it is not necessary to open the device.

CAUTION

Do not attempt to open or otherwise service any

components in the optics cavity. Opening or servicing

any part of the optics cavity by unauthorized personnel

may violate laser safety regulations. The optics system is

a factory only repair item.

CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may result

in exposure to hazardous visible laser light.

The product utilizes a low-power laser diode. Although staring directly at the

laser beam momentarily causes no known biological damage, avoid staring at

the beam as one would with any very strong light source, such as the sun.

Avoid that the laser beam hits the eye of an observer, even through reflective

surfaces such as mirrors, etc.

CAUTION

Use of optical systems with the scanner will increase eye

hazard. Optical instruments include binoculars,

microscopes, eye glasses and magnifying glasses.

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive delle autorità

internazionali e si riferiscono all’uso corretto del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla

data di produzione: CDRH 21 CFR 1040 sezione J e EN 60825-1:2001.

Non si rende mai necessario aprire l’apparecchio per motivi di installazione,

utilizzo o manutenzione.

ix

ATTENZIONE

Non tentare di accedere allo scomparto contenete i

componenti ottici o di farne la manutenzione.

L’apertura dello scomparto, o la manutenzione di

qualsiasi parte ottica da parte di personale non

autorizzato, potrebbe violare le norme della sicurezza. Il

sistema ottico può essere riparato solamente alla

fabbrica.

ATTENZIONE

L'utilizzo di procedure o regolazioni differenti da quelle

descritte nella documentazione può provocare

un'esposizione pericolosa a luce laser visibile.

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti

danni riportati dall’occhio umano in seguito ad una esposizione di breve durata,

evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente

di luminosità intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser

negli occhi di un osservatore, anche attraverso superfici riflettenti come gli

specchi.

ATTENZIONE

L’uso di strumenti ottici assieme allo scanner può

aumentare il pericolo di danno agli occhi. Tali strumenti

ottici includono cannocchiali, microscopi, occhiali e lenti

di ingrandimento.

DEUTSCH

Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die

von internationalen Behörden auferlegt wurden, und sie beziehen sich auf den

korrekten Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1:2001

und CDRH 21 CFR 1040 Subchapter J Normen für die Lasersicherheit.

Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und

Wartungs-Arbeiten zu öffnen.

ACHTUNG

Unter keinen Umständen darf versucht werden, die

Komponenten im Optikhohlraum zu öffnen oder auf

irgendwelche andere Weise zu warten. Das Öffnen bzw.

Warten der Komponenten im Optikhohlraum durch

unbefugtes Personal verstößt gegen die Laser-

Sicherheitsbestimmungen. Das Optiksystem darf nur

werkseitig repariert werden.

x

ACHTUNG

Jegliche Änderungen am Gerät sowie Vorgehensweisen,

die nicht in dieser Betriebsanleitung beschrieben werden,

können ein gefährliches Laserlicht verursachen.

Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von

kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in

den Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die

Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines

Beobachters, noch gegen reflektierende Oberflächen zu richten.

ACHTUNG

Die Verwendung von Optiksystemen mit diesem Scanner

erhöht die Gefahr einer Augenbeschädigung. Zu optischen

Instrumenten gehören unter anderem Ferngläser,

Mikroskope, Brillen und Vergrößerungsgläser.

FRANÇAIS

Les informations suivantes sont fournies selon les règles fixées par les autorités

internationales et se réfèrent à une correcte utilisation du terminal.

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de

fabrication: CDRH 21 CFR 1040 sous-chapitre J et EN 60825-1:2001.

Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou

l’entretien.

ATTENTION

Ne pas essayer d’ouvrir ou de réparer les composants de

la cavité optique. L’ouverture de la cavité optique ou la

réparation de ses composants par une personne non

qualifiée peut entraîner le nonrespect des règles de

sécurité relatives au laser. Le système optique ne peut

être réparé qu’en usine.

ATTENTION

L'utilisation de procédures ou réglages différents de ceux

donnés ici peut entraîner une dangereuse exposition à

lumière laser visible.

Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été

constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement

le rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter

aussi de diriger le rayon vers les yeux d’un observateur, même à travers des

surfaces réfléchissantes (miroirs, par exemple).

xi

ATTENTION

L’utilisation d’instruments optiques avec le scanneur

augmente le danger pour les yeux. Les instruments

optiques comprennent les jumelles, les microscopes, les

lunettes et les verres grossissants.

ESPAÑOL

Las informaciones siguientes son presentadas en conformidad con las

disposiciones de las autoridades internacionales y se refieren al uso correcto

del terminal.

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigentes de seguridad láser a la

fecha de producción: CDRH 21 CFR 1040 Sección J y EN 60825-1:2001.

No es necesario abrir el aparato para la instalación, la utilización o la

manutención.

ATENCIÓN

No intente abrir o de ninguna manera dar servicio a ninguno

de los componentes del receptáculo óptico. Abrir o dar

servicio a las piezas del receptáculo óptico por parte del

personal no autorizado podría ser una violación a los

reglamentos de seguridad. El sistema óptico se puede

reparar en la fábrica solamente.

ATENCIÓN

La utilización de procedimientos o regulaciones diferentes

de aquellas describidas en la documentación puede causar

una exposición peligrosa a la luz láser visible.

El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los

ojos humanos a consecuencia de una exposición de corta duración. Eviten de

mirar fijo el rayo láser así como evitarían cualquiera otra fuente de luminosidad

intensa, por ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos

de un observador, también a través de superficies reflectantes como los

espejos.

ATENCIÓN

El uso de sistemas ópticos con el escáner aumentará el

riesgo de daños oculares. Los instrumentos ópticos

incluyen binoculares, microscopios, lentes y lupas.

xii

LED CLASS

According to EN60825-1:2001, the Datalogic Memor™ 1D models which use

the green spot LED are also CLASS 1 LED PRODUCTS.

APPARECCHIO LED CLASSE 1 IEC PRODUIT LED DE CLASSE 1 IEC

PRODUKT LED KLASSE 1 IEC PRODUCTO LED DE CLASE 1 IEC

According to EN60825-1:2001, the Datalogic Memor™ 2D models which use

the illuminator LED are also CLASS 1M LED PRODUCTS.

LED LIGHT

DO NOT VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS

CLASS 1M LED PRODUCT

LUCE LED

NON OSSERVARE DIRETTAMENTE

CON STRUMENTI OTTICI

APPARECCHIO LED DI CLASSE 1M

LAMPE LED

NE PAS OBSERVER DIRECTEMENT

AVEC INSTRUMENTS OPTIQUES

APPAREIL LED DE CLASSE 1M

LUZ LED

NO OBSERVAR DIRECTAMENTE

CON INSTRUMENTOS ÓPTICOS.

PRODUCTO LED DE CLASE 1M

LED-LICHT.

NICHT DIREKT MIT OPTISCHEN

INSTRUMENTEN BETRACHTEN.

GERÄTEKLASSE 1M.

RADIO COMPLIANCE

In radio systems configured with mobile computers and access points, the

frequencies to be used must be allowed by the spectrum authorities of the

specific country in which the installation takes place. Be absolutely sure that the

system frequencies are correctly set to be compliant with the spectrum

requirements of the country.

The Radio modules used in this product automatically adapt to the frequencies

set by the system and do not require any parameter settings.

The following shows the correspondence between the Datalogic Memor™

models and the Radio components:

 DL-Memor+802.11g+BT models: 802.11b/g and BT radio modules

 DL-Memor+EdgeE+BT models: GSM/GPRS/EDGE and BT radio modules

xiii

Information for the User

ENGLISH

Contact the competent authority responsible for the management of radio

frequency devices of your country to verify any possible restrictions or licenses

required.

Refer to the web site

http://europa.eu.int/comm/enterprise/rtte/spectr.htm for

further information.

ITALIANO

Prendi contatto con l'autorità competente per la gestione degli apparati a radio

frequenza del tuo paese, per verificare eventuali restrizioni o licenze. Ulteriori

informazioni sono disponibili sul sito:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm.

FRANÇAIS

Contactez l'autorité compétente en la gestion des appareils à radio fréquence

de votre pays pour vérifier d'éventuelles restrictions ou licences. Pour tout

renseignement vous pouvez vous adresser au site web:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm.

DEUTSCH

Wenden Sie sich an die für Radiofrequenzgeräte zuständige Behörde Ihres

Landes, um zu prüfen ob es Einschränkungen gibt, oder eine Lizenz

erforderlich ist. Weitere Informationen finden Sie auf der Web Seite:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm.

ESPAÑOL

Contacta la autoridad competente para la gestión de los dispositivos de radio

frecuencia de tu país, para verificar cualesquiera restricciones o licencias

posibles requerida. Además se puede encontrar mas información en el sitio

Web:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm.

xiv

FCC COMPLIANCE

Modifications or changes to this equipment without the expressed written

approval of Datalogic could void the authority to use the equipment.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the

following measures:

-

Reorient or relocate the receiving antenna.

-

Increase the separation between the equipment and receiver.

-

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-

Consult the dealer or an experienced radio/TV technician for help.

FCC ID:

U4G0030 for models:

DL-Memor+802.11g+BT

xv

SAR COMPLIANCE

- This product has been tested and found to comply with the following

standards:

- OET BULLETIN 65 SUPPLEMENT C: evaluating compliance with FCC

guidelines for human exposure to radio frequency electromagnetic fields.

- EN 50360:2001: product standard to demonstrate the compliance of

mobile phones with the basic restrictions related to human exposure to

electromagnetic fields (300 MHz – 3 GHz).

- EN 62311:2008: assessment of electronic and electrical equipment related

to human exposure restrictions for electromagnetic fields (0 Hz – 300

GHz).

PATENTS

This product is covered by one or more of the following patents.

Design Pat.: AU 310182 S; CN 658612; HK 0601962.6; KR 30-0466667; JP

1325117; TW D118829; US D574,830 S.

US Pat.: 5,992,740; 6,808,114 B1; 6,997,385 B2; 7,387,246 B2.

European Pat.: 681,257 B1; 789,315 B1; 1,128,315 B1; 1,396,811 B1.

Additional patents pending.

xvi

WEEE COMPLIANCE

Informazione degli utenti ai sensi della Direttiva Europea 2002/96/EC

L’apparecchiatura che riporta il simbolo del bidone barrato deve essere

smaltita, alla fine della sua vita utile, separatamente dai rifiuti urbani.

Smaltire l’apparecchiatura in conformità alla presente Direttiva consente di:

 evitare possibili conseguenze negative per l’ambiente e per la salute

umana che potrebbero invece essere causati dall’errato smaltimento

dello stesso;

 recuperare materiali di cui è composto al fine di ottenere un

importante risparmio di energia e di risorse.

Per maggiori dettagli sulle modalità di smaltimento, contattare il Fornitore dal

quale è stata acquistata l’apparecchiatura o consultare la sezione dedicata sul

sito www.mobile.datalogic.com.

Information for the user in accordance with the European Commission

Directive 2002/96/EC

At the end of its useful life, the product marked with the crossed out wheeled

wastebin must be disposed of separately from urban waste.

Disposing of the product according to this Directive:

 avoids potentially negative consequences to the environment and

human health which otherwise could be caused by incorrect disposal

 enables the recovery of materials to obtain a significant savings of

energy and resources.

For more detailed information about disposal, contact the supplier that provided

you with the product in question or consult the dedicated section at the website

www.mobile.datalogic.com.

Information aux utilisateurs concernant la Directive Européenne

2002/96/EC

Au terme de sa vie utile, le produit qui porte le symbole d'un caisson à ordures

barré ne doit pas être éliminé avec les déchets urbains.

Éliminer ce produit selon cette Directive permet de:

xvii

 éviter les retombées négatives pour l'environnement et la santé

dérivant d'une élimination incorrecte

 récupérer les matériaux dans le but d'une économie importante en

termes d'énergie et de ressources

Pour obtenir des informations complémentaires concernant l'élimination,

veuillez contacter le fournisseur auprès duquel vous avez acheté le produit ou

consulter la section consacrée au site Web www.mobile.datalogic.com.

Información para el usuario de accuerdo con la Directiva Europea

2002/96/CE

Al final de su vida útil, el producto marcado con un simbolo de contenedor de

bassura móvil tachado no debe eliminarse junto a los desechos urbanos.

Eliminar este producto de accuerdo con la Directiva permite de:

 evitar posibles consecuencias negativas para el medio ambiente y la

salud derivadas de una eliminación inadecuada

 recuperar los materiales obteniendo así un ahorro importante de

energía y recursos

Para obtener una información más detallada sobre la eliminación, por favor,

póngase en contacto con el proveedor donde lo compró o consultar la sección

dedicada en el Web site www.mobile.datalogic.com.

Benutzerinformation bezüglich Richtlinie 2002/96/EC der europäischen

Kommission

Am Ende des Gerätelebenszyklus darf das Produkt nicht über den städtischen

Hausmüll entsorgt werden. Eine entsprechende Mülltrennung ist erforderlich.

Beseitigung des Produkts entsprechend der Richtlinie:

 verhindert negative Auswirkungen für die Umwelt und die Gesundheit

der Menschen

 ermöglicht die Wiederverwendung der Materialien und spart somit

Energie und Resourcen

Weitere Informationen zu dieser Richtlinie erhalten sie von ihrem Lieferanten

über den sie das Produkt erworben haben, oder besuchen sie unsere Hompage

unter www.mobile.datalogic.com.

xviii

CHINA ROHS POLLUTION CONTROL LOGOS

Toxic or Hazardous Substances and Elements for DL-MEMOR

Part

name

Pb Hg Cd Cr6+ PBB PBDE

Upper

Case

O O O O O O

Lower

Case

O O O O O O

Touch

Panel

O O O O O O

PCB

Board

O O O O O O

Laser

Engine

X O O O O O

Imager

Engine

O O O O O O

GSM

Module

(Note 1)

O O O O O O

BT

Module

(Note 2)

O O O O O O

802.11b/

g Radio

Module

(Note 3)

O O O O O O

O: Indicates that this is a toxic or hazardous substance contained in all of the

homogenous materials for this part is below the limit requirement in

SJ/T11363-2006.

X: Indicates that this is toxic or hazardous substance contained in at least

one of the homogeneous materials used for this part is above the limit

requirement in SJ/T11363-2006.

Note 1: It is only for 944201018 Model.

Note 2: It is only for 944201015, 944201019, 944201022, 944201018

Models.

Note 3: It is only for 944201015, 944201019, 944201022 Models.

Note 4: 99% of the parts of this product adopt the nonpoisonous and

harmless environmental protection material to make, the part with

poisonous harmful substance or the element is all unable to realize

the substitution of the poisonous harmful thing or the element

because the global technological development level is limited.

xix

GENERAL VIEW

C

H

I

D

K

B

J

A

E

L

M

F

G

A) QVGA 64K Color Display

B) Good Read or User

Programmable LED

C) Charging Status LED

D) Speaker

E) Scan Key

F) Keyboard

G) Microphone

H) Strap with Stylus Holder

I) Laser Safety Label

J) Rear Speaker

K) ON/OFF Power Key

L) Product Label (under battery)

M) Battery Cover

O

Q

P

N

N) Data Capture/Laser Output

Window *

O) DC Charger Connector

P) Communication/Charger Connector

(through cradle)

Q) Mini USB Communication

Connector (through cable)

∗ Remove protective film cover before use

xx

La pagina sta caricando ...

Datalogic Memor Manuale utente

Datalogic Memor Manuale utente

in altre lingue

Documenti correlati

Altri documenti