Canon EOS C300 Mark III Guida utente

Digital Cinema Camera

Instruction Manual

PUB. DIE-0549-000

Firmware ver. 1.0.0.1

(

)

ver. 1.0.1.1

(

)

2

Safety Instructions

Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent

injury or harm to the operator of the product or others.

WARNING

Denotes the risk of serious injury or death.

• Stop using the product in any case of unusual circumstances such as the presence of smoke or a strange

smell.

• Do not touch any exposed internal parts.

• Do not get the product wet. Do not insert foreign objects or liquids into the product.

• Do not touch the product connected to a power outlet during lightning storms. This may cause electric shock.

• Do not disassemble or modify the product.

• Do not expose the product to strong shocks or vibration.

• Use only power sources specified in this instruction manual

for use with the product.

• Observe the following instructions when using a battery charger or AC adapter.

- Do not touch the battery charger or AC adapter connected to a power outlet during lightning storms.

- Do not use the product if the power plug is not fully inserted into the power outlet.

- Do not unplug the product by pulling the power cord.

- Do not plug in or unplug the product with wet hands.

- Do not place heavy objects on the power cord. Do not damage, break or modify the power cord.

- Do not leave the product connected to a power source for long periods of time.

- Do not expose the power plug and terminals to dirt or let them come into contact with metallic pins or other

metal objects.

- Do not charge batteries/battery packs at temperatures outside the range of 0 - 40 °C (32 - 104 °F).

• Observe the following instructions when using commercially available batteries or provided battery packs.

- Do not use leaking batteries/battery packs.

If a battery/battery pack leaks and the material contacts your skin or clothing, flush the exposed area

thoroughly with running water. In case of eye contact, flush thoroughly with copious amounts of clean

running water and seek immediate medical assistance.

- Use batteries/battery packs only with their specified product.

- Do not heat batteries/battery packs or expose them to fire.

- Do not charge batteries/battery packs using non-authorized battery chargers.

- Do not expose the terminals to dirt or let them come into contact with metallic pins or other metal objects.

- Keep batteries out of the reach of children.

- When disposing of batteries/battery packs, insulate the terminals with tape or other means.

• Do not shoot the sun directly or point a lens or a camera/camcorder with a lens attached at the sun. Even

when the sun does not appear on the screen or is behind the subject, the lens may concentrate the sunlight

and cause a malfunction or fire.

• Do not leave a lens or a camera/camcorder with a lens attached, exposed without the lens cap attached. The

lens may concentrate the light and cause fire.

• Do not leave the lens exposed without the lens cap attached.

• Do not wrap the product in cloth or other materials when in use or shortly after use when the product is still

warm in temperature.

• Do not allow the product to maintain contact with the same area of skin for extended periods of time during

use. This may result in low-temperature contact burns, including skin redness and blistering, even if the

product does not feel hot. The use of a tripod or similar equipment is recommended when using the product in

hot places and for people with circulation problems or less sensitive skin.

• Keep the product out of the reach of young children.

• A strap wrapped around a person’s neck may result in strangulation.

• Periodically remove any dust buildup from the power plug and power outlet using a dry cloth.

• Follow any indications to turn off the product in places where its use is forbidden. Not doing so may cause

other equipment to malfunction due to the effect of electromagnetic waves and even result in accidents.

• Before installing, be sure the surface is capable of supporting the total weight of the camera and connected

devices, and sufficiently reinforce the surface if necessary.

3

CAUTIONS

Follow the cautions below. Otherwise physical injury or property damage may result.

• Strap is intended for use on the body only. Hanging the strap with any product attached on a hook or other

object may damage the product. Also, do not shake the product or expose the product to strong impacts.

This may cause injury or damage to the product.

• Do not leave the product in places exposed to extremely high or low temperatures. The product may become

extremely hot/cold and cause burns or injury when touched.

• Only mount the product on a tripod that is sufficiently sturdy.

• Do not look at the screen for prolonged periods of time. This may induce symptoms similar to motion

sickness. In such a case, stop using the product immediately and rest for a while before resuming use.

4

5

Safety Instructions 2

1. Introduction 9

About this Manual 9

Conventions Used in this Manual 9

Supplied Accessories 10

Before Using the Camera 11

Names of Parts 12

Camera 12

LM-V2 LCD Monitor 18

LA-V2 LCD Attachment Unit 19

GR-V1 Camera Grip 20

Handle Unit 21

4K and Higher Resolutions: Workflow

Overview 22

Color Grading with the ACES Workflow 23

2. Preparations 25

Preparing the Power Supply 25

Using a Battery Pack 25

Using the DC IN 12V Terminal 27

Preparing the Handle Unit and LCD Monitor 29

Attaching the Handle Unit 29

Attaching the LCD Monitor 29

Adjusting the LCD Monitor 31

Removing the LCD Monitor and LCD Attachment

Unit 32

Date, Time and Language Settings 33

Setting the Date and Time 33

Changing the Language 33

Using the Menus 34

Selecting an Option from the Menu 34

Using the Customized Menus (My Menu) 35

Preparing the Lens 37

Attaching an EF Lens 37

Updating the Firmware of an EF Lens 38

In-Camera Lens Correction 39

Preparing Other Accessories 40

Examples of Camera Configurations 40

Removing and Attaching the Camera Grip 41

Attaching the Microphone Holder 42

Preparing Recording Media 43

Compatible Recording Media 43

Inserting a CFexpress Card 44

Removing a CFexpress Card 44

Inserting and Removing an SD Card 45

Initializing Recording Media 46

Switching Between CFexpress Card Slots 46

Relay Recording and Double Slot Recording 47

Checking the Remaining Recording Time on a

Card 47

Recovering Clips 48

Adjusting the Black Balance 49

3. Recording 51

Recording Video and Photos 51

Recording 51

Onscreen Displays 53

Selecting the Onscreen Display Level 57

Setting a Card’s Volume Label 59

Setting the Clip File Name 59

Using the Fan 61

Video Configuration: Video Format, Sensor Mode,

System Frequency, Resolution and Frame

Rate 62

Selecting the Sensor Mode 62

Selecting the Main Recording Format 62

Selecting the System Frequency 62

Selecting the Resolution and Color Sampling

Settings 62

Selecting the Frame Rate 63

Selecting the Bit Rate 63

Proxy Clips (Simultaneous Recording) 67

Direct Setting Mode (FUNC Button) 68

Using the Direct Setting Mode 68

Shutter Speed 69

Changing the Shutter Speed Mode and Value 70

ISO Speed/Gain 71

Changing the ISO Speed or Gain Value 72

Using the Control Dial 72

ND Filter 73

Table of Contents

6

Aperture 74

Manual Aperture: Changing the Aperture

Value 74

Using the Control Dial 75

Momentary Automatic Aperture - Push Auto

Iris 76

Automatic Aperture 76

Exposure Compensation - AE Shift 77

Light Metering Mode 77

White Balance 78

Custom White Balance 78

Color Temperature/Preset White Balance 79

Auto White Balance (AWB) 80

Focus 81

Manual Focus 82

One-Shot AF 85

AF-Boosted MF 85

Continuous AF 86

Changing the AF Frame Size and Position 87

Face Detection 88

Tracking a Specific Subject 89

Image Stabilization 90

Zoom 91

Onscreen Markers, Zebra Patterns and False

Color 92

Displaying Onscreen Markers 92

Displaying Zebra Patterns 94

Displaying False Color 94

Setting the Time Code 95

Selecting the Time Code Mode 95

Selecting Drop or Non-Drop Frame 96

Setting the User Bit 97

Synchronizing with an External Device 98

Connecting an External Device 98

Time Code Signal Input 98

Time Code Signal Output 99

Reference Video Signal Input (Genlock

Synchronization) 99

Reference Video Signal Output 100

Recording Audio 101

Audio Settings and Recorded Audio

Channels 101

Connecting an External Microphone or External

Audio Input Source to the Camera 104

Setting the Audio Input Type for the INPUT 1/

INPUT 2 Terminals 105

Selecting the Audio Input Source for Audio

Channels 105

Adjusting the Audio Recording Level 106

Advanced Audio Input Settings 107

Monitoring the Audio with Headphones 108

Colors Bars/Audio Reference Signal 109

Color Bars 109

Audio Reference Signal 109

Video Scopes 110

Displaying a Video Scope 110

Configuring the Waveform Monitor 110

Configuring the Vectorscope 111

Adding Marks to Clips in CAMERA Mode 112

Adding a Shot Mark while Recording 112

Adding an $ Mark or % Mark to the Last Clip

Recorded 112

Using Metadata 113

Setting a User Memo Created with Canon XF

Utility 113

Entering Slate Information About the

Recording 114

Reviewing a Recording 115

Special Recording Modes 116

Slow & Fast Motion Recording 116

Pre-recording 119

Using Anamorphic Lenses 120

Using the Optional RC-V100 Remote

Controller 121

7

4. Customization 123

Assignable Buttons 123

Custom Picture Settings 127

Selecting Custom Picture Files 127

Preset Picture Settings 127

Renaming Custom Picture Files 128

Protecting Custom Picture Files 128

Resetting Custom Picture Files 128

Editing a Custom Picture File’s Settings 129

Copying Custom Picture Files 129

Embedding the Custom Picture File in Clips 129

Available Custom Picture Settings 130

Saving and Loading Menu Settings 134

Saving Menu Settings 134

Loading Menu Settings 134

5. Playback 135

Playback 135

Clip Index Screen 135

Playing Back Recordings 137

Onscreen Displays During Clip Playback 138

Clip Playback Controls 139

Adjusting the Volume 139

Clip/Photo Operations 140

Displaying Clip Information 140

Adding $ Marks or % Marks 141

Deleting $ Marks or % Marks 142

Adding Shot Marks 142

Deleting All the Shot Marks from a Clip 142

Deleting Clips and Photos 142

Deleting the User Memo and GPS Information from

a Clip 143

6. External Connections 145

Video Output Configuration 145

SDI OUT Terminal Video Output Configuration

(Recording/Playback) 145

MON. Terminal / HDMI OUT Terminal Video

Output Configuration

(Recording/Playback) 146

Connecting to an External Monitor or

Recorder 147

Using the SDI OUT Terminal 147

Using the MON. Terminal 148

Using the HDMI OUT Terminal 148

Selecting the Video Output’s Scan Mode 149

Superimposing Onscreen Displays on Video

Outputs 149

Changing the Opacity Level of Onscreen

Displays 149

Selecting the Output Range 150

Applying a LUT to Video Outputs 151

Adjusting the Color Quality for HLG Output 152

Adjusting the Gain Difference between HDR and

SDR 152

User LUTs 153

Audio Output 155

Working with Clips on a Computer 156

Saving XF-AVC Clips 156

Developing RAW Clips 156

7. Network Functions 157

About the Network Functions 157

Using Networks 158

Using a Wi-Fi Network 158

Using a Wired (Ethernet) Network 159

Configuring Connection Settings 160

Adding a New Connection Setting Using the

Wizard 161

Function Settings 162

Other Connection Methods 165

Checking and Changing Connection

Settings 167

Configuring the Camera’s IP Address

Manually 169

Checking and Changing Communication Settings/

Function Settings 169

Configuring IPv6 Settings 171

Reading a Root Certificate for FTPS Transfer 171

802.1X Authentication 172

Giving a Nickname to the Camera 172

Checking the Network’s Status 173

FTP File Transfer 174

Transferring a Single Clip 174

Transferring All Clips 174

8

IP Streaming 175

Browser Remote: Controlling the Camera from a

Network Device 177

Starting Browser Remote 177

Using Browser Remote 179

8. Additional Information 185

Menu Options 185

Displaying the Status Screens 198

Troubleshooting 208

List of Messages 214

Handling Precautions 219

Maintenance/Others 222

Optional Accessories 223

Specifications 225

Reference Tables 231

Approximate Recording Time on a Card 231

Charging Times 231

Approximate Usage Times with a Fully Charged

Battery Pack 232

Appendix: Compatible Lenses and Functions 233

Appendix: Camera Dimensions 236

Index 243

1

9

Introduction

About this Manual

Thank you for purchasing the Canon EOS C300 Mark III / EOS C500 Mark II. Please read this manual carefully

before you use the camera and retain it for future reference. Should the camera fail to operate correctly, refer to

Troubleshooting

(A 208).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camera’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number.

• : Text that applies only to the model shown in the icon.

• The following terms are used in this manual.

- “Screen” refers to the LCD screen on the supplied LCD monitor.

- “LCD monitor” refers to the supplied LM-V2 LCD Monitor.

- “LCD attachment unit” refers to the supplied LA-V2 LCD Attachment Unit.

- “Camera grip” refers to the supplied GR-V1 Camera Grip.

- “Viewfinder” refers to the optional EVF-V50 OLED Electronic Viewfinder.

- “Battery pack” refers to a Canon BP-A30 Battery Pack (optional) or BP-A60 Battery Pack (supplied).

- “AC adapter” refers to a commercially available power adapter.

- “SD card” refers to an SD, SDHC or SDXC memory card.

- “Recording media” or “card” alone, not specified: refers collectively to CFexpress cards and SD cards.

- “CAMERA mode”: operating mode for making recordings (shooting mode).

“MEDIA mode”: operating mode for playing back and managing recordings (playback mode).

- “Access indicator”: when not specified, refers collectively to the SD CARD and CFexpress access

indicators.

- “RAW” refers to the data recorded using Cinema RAW Light.

• Unless indicated otherwise, illustrations in the manual show the Canon EOS C500 Mark II camera with a

Canon EF 50mm f/1.4 USM lens attached.

• Photographs in the manual are simulated pictures taken with a still camera.

• Unless indicated otherwise, screenshots in the manual are from the EOS C500 Mark II camera. Some

screenshots have been altered to make them easier to read. Furthermore, screenshots used are from a

product in development and may differ slightly from the actual screens due to product enhancement.

Supplied Accessories

10

Supplied Accessories

The following accessories are supplied with the camera.

LM-V2 LCD Monitor LA-V2 LCD Attachment Unit Handle Unit GR-V1 Camera Grip*

(incl. grip attachment ring)

Microphone Holder

(incl. M4 fixation bolts, x2)

BP-A60 Battery Pack

(incl. terminal cover)

CG-A20 Battery Charger CA-CP200 B Compact Power Adapter

(for the CG-A20; incl. power cord)

Expansion System Attachment

Bracket

Body Cap* UN-5 Unit Cable Hex socket head bolts

(0.64 cm, 1/4" x1, M3 x4)

and hex wrenches

(x3, for 0.64 cm, 1/4" / M4 / M3 bolts)

SS-1200 Shoulder Strap Thumb Rest Tape Measure Hook* Quick Guide

* Comes pre-attached to the camera.

11

Supplied Accessories

Before Using the Camera

• Before making important recordings for the first time, make test recordings using the video configuration(s) you

plan to use to check that the camera operates correctly. Should it fail to operate correctly, refer to

Troubleshooting

(A 208).

• Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of copyright

owners and be contrary to copyright laws.

• About the LCD screen: The screen is produced using extremely high-precision manufacturing techniques, with

more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or light up

permanently. This has no effect on the recorded image and does not constitute a malfunction.

IMPORTANT

• CFexpress cards can become hot due to the high operating temperature inside the camera. Removing a

CFexpress card immediately after using it for recording may cause burns or cause you to drop the card,

resulting in damage to the card.

• Observe the following precautions while an access indicator (A 44, 45) is illuminated or flashing in red. Failing

to do so may result in permanent data loss.

- Do not turn off the camera and do not remove the battery or other power source.

- Do not open the card compartment cover.

Names of Parts

12

Names of Parts

Camera

* See

Assignable Buttons

(A 123)

Locking the camera’s controls (key lock)

You can set the

Q

switch to

C

(key lock) to lock all the camera’s buttons and switches. This is useful in

preventing settings from being changed due to inadvertently pressing one of the buttons. Set the

Q

switch back to CAMERA to reactivate the controls.

When the camera’s controls are locked, you can still operate the camera using an optional RC-V100 Remote

Controller or the Browser Remote application.

* In CAMERA mode, REC buttons are not locked by default but you can choose to lock them too (A 195).

2

3

4

5

6

7

1

109811

12 13 14 15

1 Tape measure hook and focal plane mark

2 MAGN. (magnification) button (A 84)/

Assignable button Camera 1*

3 PEAKING button (A 84)/

Assignable button Camera 2*

4 ND FILTER +/– buttons (A 73)

5 ZEBRA button (A 94)/

Assignable button Camera 3*

6 WFM (video scope) button (A 110)/

Assignable button Camera 4*

7 SELECT dial/SET button (A 34)

8 MEDIA button (A 135)

When the camera is on, press to toggle the

camera between CAMERA mode (shooting) and

MEDIA mode (playback).

9

Q

switch

Set to CAMERA to turn on the camera or to OFF

to turn it off.

10 Built-in monaural microphone (A 105)

11 Power indicator/Rear tally lamp (A 51)

12 Control dial (A 72, 75)

13 REC (start/stop recording) button (A 51)

14 WB (white balance) button (A 78)/

Assignable button Camera 10*

Ò

(play/pause) button (A 137)

15 Å (white balance adjustment) button (A 78)/

Assignable button Camera 11*/

INDEX button (A 136)/

Ñ

(stop) button (A 137)

13

Names of Parts

* See

Assignable Buttons

(A 123)

1

2

3

5

6

4

78

9

10

11

12

13 14 15

1 (illumination) button

Turns on/off the illumination of the buttons on the

camera’s left and back sides. This is convenient

for night time or black-out operation.

2 LUT button (A 151)/

Assignable button Camera 5*

3 S&F (slow & fast motion recording) button

(A 116)/Assignable button Camera 8*

4 ISO/GAIN button (A 71)/

Assignable button Camera 6*

5 S&F FPS (slow & fast shooting frame rate) button

(A 116)/Assignable button Camera 9*

6 SHUTTER (shutter speed mode) button (A 70)/

Assignable button Camera 7*

7 Air intake vent (A 61)

8 Card compartment cover (A 44, 45)

9 CFexpress card release buttons: for CFexpress

(left), CFexpress (right), (A 44)

10 CFexpress card slots: for CFexpress (left),

CFexpress (right), (A 44)

11 SD card slot (A 45)

12 Card compartment cover switch

13 SD CARD access indicator (A 45)

14 SLOT SELECT (CFexpress card selection) button

(A 46, 136)

15 CFexpress card access indicators: for CFexpress

(left), CFexpress (right), (A 44)

Names of Parts

14

1

3

2

4

5

6

7

8

9

10 11 12

1USB terminal

For connecting the optional GP-E2 GPS Receiver.

2 Exhaust ventilation outlet (A 61)

3 Audio level switches for CH1 (top) and CH2

(bottom) (A 106)

4 System expansion terminal

5 Focal plane mark

6 Air intake vent (A 61)

7 Speaker (A 139)

8 Camera grip attachment thread/Rosette (A 41)

Compliant with ARRI rosettes.

9 GRIP (camera grip connection) terminal (A 41)

10 Audio level dials for CH1 (top) and CH2 (bottom)

(A 106)

11 INPUT 1 (top) / INPUT 2 (bottom) switches

(audio source selection, A 105)

12 Cover for audio controls

15

Names of Parts

1

2

3

4

5

6

7

8

9

10

EF lens mount

1Front tally lamp (A 51)

2VIDEO terminal (A 29)

3 Lens mount fixation bolts

4 PUSH AUTO IRIS (momentary automatic aperture)

button (A 76)/

Assignable button Camera 14 (A 123)

5 EF-S lens mount index (A 37)

6 EF lens mount index (A 37)

7 Lens release button (A 37)

8EF lens lock pin

9 ONE-SHOT AF (focus automatically once) button

(A 85)/

Assignable button Camera 15 (A 123)

10 EF lens contacts (A 37)

Names of Parts

16

Removing and attaching the terminal covers

You can remove the covers of the camera’s terminals to access them more easily. To remove a terminal’s

cover, open the cover and gently pull it straight out. To attach back the terminal cover, insert the connecting

strip into the opening.

NOTES

• If the connecting strip is difficult to grasp, use a pair of tweezers or similar tool.

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

18

19

20

17

1 Expansion unit connector

For connecting the optional EVF-V50 OLED

Electronic Viewfinder, EU-V1 Expansion Unit 1 or

EU-V2 Expansion Unit 2.

2 Expansion unit connector cover

3 Power indicator/Rear tally lamp (A 51)

4 FUNC (main functions) button (A 68)/

Assignable button Camera 12 (A 123)

5 Joystick (A 34)

6 CANCEL button (A 34)

7 MENU button (A 34, 123)

8 Screw holes for M4 bolts (7.5 mm (0.30 in.) deep,

x4)

9 Battery compartment (A 26)

10 MON. terminal (A 147, 148)

11 SDI OUT terminal (A 147)

12 TIME CODE terminal (A 98, 99)

13 REMOTE A terminal (A 121)

For connecting the optional RC-V100 Remote

Controller or commercially available remote

controllers.

14 HDMI OUT terminal (A 147, 148)

15 MIC (microphone) terminal (A 104)

16

×

(headphone) terminal (A 108)

17 INPUT terminals (XLR): INPUT 1 (top), INPUT 2

(bottom) (A 104)

18 AUDIO STATUS (display the [¡ Audio Setup]

status screens) button (A 202)/

Assignable button Camera 13 (A 123)

19 DC IN 12V terminal (A 27)

20 BATTERY RELEASE button (A 26)

17

Names of Parts

IMPORTANT

• Do not use tripods and other accessories with mounting screws exceeding the depth of the screw holes on

the camera as this may damage the camera.

• Mounting the camera on a tripod using only one of the 1/4"-20 screw holes for tripod reinforcement may

damage the camera.

1 2 5 7 8 9 10 11

43

13

12

6

14 15

1 Tape measure hook

Use the hook to accurately measure the distance

from the focal plane.

2 Screw holes for 1/4"-20 mounting screws

(9 mm (0.35 in.) deep, x6)

3 Top accessory mount with socket for 1/4"-20

mounting screws

(6.7 mm (0.26 in.) deep)

4 Accessory shoe with socket for 1/4"-20 mounting

screws (6.7 mm (0.26 in.) deep)/

Handle attachment unit (A 29)

5 Socket for the expansion system attachment

bracket

6 Screw hole for 3/8"-16 mounting screws

(10 mm (0.39 in.) deep)

7 TB-1 Tripod Base

8 Socket for tripod’s anti-rotation pin

(5.5 mm (0.22 in.) deep)

For tripods with 3/8"-16 mounting screws.

9 Screw hole for tripods with 1/4"-20 mounting

screws (7 mm (0.28 in.) deep)

10 Tripod base screws

11 Sockets for tripod’s anti-rotation pin

(5 mm (0.20 in.) deep, x2)

For tripods with 1/4"-20 mounting screws.

12 M4 screws for expansion unit connector cover

13 Strap mounts

Pass the ends of the supplied shoulder strap

through the strap mounts and adjust the length of

the strap.

14 Expansion unit fixation screw holes (M4, x2)

15 Screw holes for tripod reinforcements and

accessories with 1/4"-20 mounting screws

(7.5 mm (0.30 in.) deep, x3)

Names of Parts

18

LM-V2 LCD Monitor

1

2

3

4

5

6

7

8

9

10

1 LCD panel with touch screen (A 29, 31)

2 FUNC (main functions) button (A 68)/

Assignable button LCD LM-V1/V2 1 (A 123)

3 MENU button (A 34, 123)

4 Joystick (A 34)

5 MIRROR (invert the displayed image) button

(A 32)

6 CANCEL button (A 34)

7 DISP (display) button (A 53, 57)/

Assignable button LCD LM-V1/V2 2 (A 123)

8 LCD monitor’s position alignment mark Í (A 29)

9 Screw holes for 1/4"-20 screws

(11.2 mm (0.44 in.) deep, x2)

10 VIDEO terminal (A 29)

19

Names of Parts

LA-V2 LCD Attachment Unit (A 29)

Microphone Holder (A 42, 104)

1

7

5

9

8

4

8

11

10

12

2

3

4

1

6

5

1 LCD monitor fixation bolt

2 Base 1

3 Sockets for the microphone holder (A 42)

4 Cable clamp

5Pivot A

6 Base 2 fixation bolt

7Pivot B

8Base 2

9 Locking knob

10 LCD monitor mount

11 LCD monitor’s position alignment mark Í

12 Attachment mount

1

3

2

1 Microphone lock screw

2 Microphone holder

3 Microphone cable clamp

Names of Parts

20

GR-V1 Camera Grip (A 41)

At the time of purchase, the camera grip is pre-attached to the camera.

1

4

5

6

7

8

9

10

2

3

1 Control dial (A 72, 75)

2 REC (start/stop recording) button (A 51)

3 Grip belt

Adjust the grip belt so that you can reach the REC

button on the camera grip with your index finger

but still have a comfortable but secure grip.

4 Joystick (A 34)

5 FOCUS GUIDE button (A 83)/

Assignable button Camera Grip 1 (A 123)

6 Rosette

Compliant with ARRI rosettes.

7 Locking screw

8 Grip attachment ring

9 Grip connection cable

10 Connection plug

La pagina sta caricando ...

Canon EOS C300 Mark III Guida utente

Questo manuale è adatto anche per

Canon EOS C300 Mark III Guida utente

in altre lingue

Documenti correlati

Altri documenti