Canon XA40 Manuale utente

PUB.DIE-0525-000C

4K Camcorder

Instruction Manual

Firmware ver. 1.0.1.0

2

COPYRIGHT WARNING

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be contrary to copyright

laws.

Trademark Acknowledgements

• SD, SDHC and SDXC Logos are trademarks of SD-3C, LLC.

• Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

• macOS is a trademark of Apple Inc., registered in the U.S. and other countries.

• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

Administrator, Inc. in the United States and other countries.

• Other names and products not mentioned above may be trademarks or registered trademarks of their respective companies.

• This device incorporates exFAT technology licensed from Microsoft.

• “Full HD 1080” refers to Canon camcorders compliant with high-definition video composed of 1,080 vertical pixels

(scanning lines).

• This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4

compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-

commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video. No license is

granted or implied for any other use for MPEG-4 standard.

• THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER

USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC

VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS

OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY

OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM

3

Highlights of the Camcorder

The Canon XA45 / XA40 4K Camcorder is a high-performance camcorder whose compact size

makes it ideal in a variety of situations. The following are just some of the many functions featured in

the camcorder.

4K Recording

CMOS sensor and DIGIC DV 6 image

processor

The camcorder is equipped with a

1/2.3-inch CMOS sensor that captures video

at an effective pixel count of approximately

8.29 megapixels (3840x2160). The video is

then processed by the DIGIC DV 6 image

processor. In addition to recording 4K video,

the camcorder employs oversampling to

record Full HD video.

XF-AVC and MP4 formats

You can choose the video format according to

your workflow needs. You can record in XF-

AVC format or MP4 format. Both formats use

the MPEG-4 AVC/H.264 codec, but XF-AVC

clips are recorded as Material eXchange

Format (MXF files), compatible with all major

non-linear (NLE) editing software.

Wide zoom lens and 8-bladed aperture

The zoom lens is equipped with 20x optical

zoom and has a focal length at full wide angle

of 29.3 mm* (35 mm equivalent), making the

camcorder versatile in a variety of shooting

situations. The 8-bladed aperture delivers a

pleasing out-of-focus blur (“bokeh”) to your

recordings.

* When the resolution is 3840x2160 and the

image stabilization is a setting other than

Dynamic IS. The focal length is 30.6 mm

when using Dynamic IS.

4K recording at 29.97P and HD

recording at 59.94P

The camcorder can record clips in MP4 or XF-

AVC format at 3840x2160 with a frame rate of

29.97P or 1920x1080 with a frame rate of

59.94P, giving you the freedom to choose the

video configuration that is most suitable for

your project. Furthermore, audio is recorded as

either 4-channel linear PCM or 2-channel AAC.

Convenience and Functionality

Recording for extended periods

With its two SD card slots, the camcorder

allows you to use dual recording (A 33) to

record the same clip on two SD cards, or relay

recording to automatically switch to the other

SD card when the one being used becomes

full. Dual recording is a convenient way to

create a backup of your recordings while relay

recording effectively extends the available

recording time.

Emphasis on versatility

This camcorder has features to make it usable

as a main camera but is also small enough to

be very portable. The advanced image

stabilization (A 68), which stabilizes the

image along 5 axes, will let you shoot in a

variety of situations in the field. The handle unit

is removable so you can attach it to enjoy

additional audio options and infrared

functionality, or remove it when you need

improved portability. The LCD touch panel and

viewfinder can be angled in a variety of

positions, allowing for shooting in tight places,

for example.

Manual controls at your fingertips

The focus/zoom ring helps you achieve the

focus you are looking for. You can easily

change the ring's functionality so that you can

operate the zoom. You can also assign certain

frequently used functions to a customizable

button and adjust those functions with the

accompanying dial (A 89). Additionally, the

camcorder also features 5 assignable buttons

on the camcorder and one onscreen

assignable touch button to which you can

assign a variety of functions to access them

with ease (A 90).

4

Face detection & tracking (A 66)

After detecting a subject's face, the camcorder

can focus on it and even track it. Furthermore,

the camcorder can be in manual focus but

switch to autofocus when a face is detected,

ensuring that important subjects are in focus.

Infrared recording

Record in darkness using infrared recording

(A 85). With the built-in infrared light on the

handle unit, you can record nocturnal animals

in their natural environment or other such

scenes.

Creativity and Artistic Expression

Special recording modes (A 42, 83)

When you make recordings, you can change

the recording frame rate to achieve a fast or

slow motion effect. Alternatively, you can use

pre-recording to record 3 seconds before you

decide to start recording, helping you capture

those hard-to-catch opportunities.

Looks (A 56)

You can adjust various aspects of the picture,

such as the color depth, sharpness and

brightness, to create a desired “look”.

Custom picture settings (A 92)

Select one of the preset color settings or set

the combination of gamma curve, color space

and color matrix that you wish to use. Then,

you can adjust a number of other image-

related parameters in detail.

Enhanced audio features (A 73)

The attachable handle unit offers expanded

audio options. It features two INPUT terminals

for external microphones (balanced input),

manual control over the audio recording level,

and control for supplying phantom power to an

external microphone

Other Features

• Menu settings file that can be saved in the

camcorder or on an SD card to restore all the

menu settings or replicate them on another

XA45 / XA40 camcorder (A 100).

• Battery packs compatible with Intelligent

System give you an estimate (in minutes) of

the remaining recording time.

• Compatibility with the optional GP-E2 GPS

Receiver to geotag your recordings (A 87).

• Compatibility with the optional RC-V100

Remote Controller (A 86) when you need a

professional level of remote control.

5

1 Introduction 8

About this Manual 8

Conventions Used in this Manual 8

Supplied Accessories 10

Names of Parts 11

2 Preparations 16

Attaching the Ferrite Core 16

Charging the Battery Pack 16

Preparing the Camcorder 19

Attaching the Microphone Holder

Unit 19

Attaching the Handle Unit 19

Using the Lens Hood 20

Adjusting the LCD Screen 20

Using the Viewfinder 21

Grip Belt and Straps 22

Basic Operation of the Camcorder 24

Turning the Camcorder On and Off 24

Setting the Camera Mode 25

Using the MENU Button and

Joystick 25

First Time Settings 26

Setting the Date and Time 26

Changing the Language 27

Changing the Time Zone 27

Using the Menus 28

Setup Menus 28

FUNC Menu 29

Using SD Cards 31

Compatible SD Cards 31

Inserting and Removing an SD Card 32

Initializing an SD Card 33

Selecting the SD Card for

Recordings 33

Dual Recording and Relay Recording 33

Recovering Clips 34

3 Recording 35

Recording Clips and Photos 35

Basic Recording 35

Reviewing the Latest Clip Recorded 37

Setting the File Name for XF-AVC

Clips 38

Video Configuration: Resolution, Bit Rate

and Frame Rate 40

Selecting the Video Format 40

Selecting the Resolution and Bit

Rate 40

Selecting the Frame Rate 40

Slow & Fast Motion Recording 42

Shooting Modes 44

Special Scene Modes 45

Exposure Adjustment 47

Manual Exposure (n)47

Momentary Automatic Aperture - Push

Auto Iris 48

Automatic Exposure 48

Touch Exposure 49

Exposure Lock (AE Lock) 50

Exposure Compensation 50

ND Filter 51

Using the Zebra Pattern 51

Backlight Correction 52

Automatic Gain Control (AGC) Limit 53

White Balance 54

Using Looks 56

Zooming 57

Using the Focus/Zoom Ring 57

Using the Zoom Rockers 58

Using the Touch Screen’s Zoom

Controls 60

Using an Optional Remote Controller 60

Soft Zoom Control 60

Digital Tele-Converter 61

Focus Adjustment 62

Manual Focus 62

Autofocus 65

Face Detection & Tracking 66

Image Stabilization 68

Dynamic IS or Standard IS 68

Setting the Time Code 69

Selecting the Time Code Mode 69

Selecting Drop Frame or Non-Drop

Frame 71

Setting the User Bit 72

Recording Audio 73

Selecting the Audio Recording Format for

MP4 Clips 73

Audio Settings and Recorded Audio

Channels 74

Table of contents

6

Connecting an External Microphone or

External Audio Input Source to the

Camcorder 75

Using Line Input or an External

Microphone Connected to an INPUT

Terminal 76

Audio Recording Level (INPUT

Terminals) 77

Adjusting the Microphone’s Sensitivity

(INPUT terminals) 77

Microphone Attenuator (INPUT

terminals) 78

Using the Built-in Microphone or an

External Microphone Connected to the

MIC Terminal 78

Audio Recording Level (Built-in

Microphone/MIC Terminal) 79

Microphone Sensitivity (Built-in

Microphone) 79

Microphone Attenuator (Built-in

Microphone or MIC Terminal) 80

Low-Cut Filter (Built-in Microphone or

MIC Terminal) 80

Using Headphones 81

Color Bars/Audio Reference Signal 82

Recording Color Bars 82

Recording an Audio Reference

Signal 82

Pre-Recording 83

Onscreen Displays 84

Infrared Recording 85

Using the Optional RC-V100 Remote

Controller 86

Using the GP-E2 GPS Receiver 87

Connecting the GPS Receiver 87

4 Customization 89

CUSTOM Dial and Button 89

Assignable Buttons 90

Custom Picture Settings 92

Selecting Custom Picture Files 92

Preset Custom Picture 92

Editing a Custom Picture File’s

Settings 93

Protecting Custom Picture Files 93

Displaying the Current Custom Picture

File Settings 94

Saving a Custom Picture File 94

Available Custom Picture Settings 95

Saving and Loading Menu Settings 100

Saving Camcorder Settings 100

Loading Camcorder Settings 100

5 Playback 101

Basic Playback 101

Playback Controls 103

Adjusting the Volume 104

Displaying Clip Information 104

Clip and Photo Operations 105

Deleting Clips and Photos 105

Trimming MP4 Clips 106

6 External Connections 107

Video Output Configuration 107

Connecting to an External Monitor 110

Connection Diagram 110

s Selecting the Terminal Used For

Output 110

s Using the SDI OUT

Terminal 111

Using the HDMI OUT Terminal 111

Audio Output 113

Selecting the Audio Channels for

Headphone or Speaker Output 113

Selecting the Audio Channels for HDMI

Output 113

7 Saving Clips 114

Working with Clips on a Computer 114

Saving MP4 Clips 114

Saving XF-AVC Clips 114

Copying Clips and Photos Between

Cards 116

8 Additional Information 117

Menu Options 117

FUNC Menu 117

Setup Menus 118

Appendix: Onscreen Icons and

Displays 127

Troubleshooting 132

List of Messages 136

Safety Instructions and Handling

Precautions 139

Camcorder 140

Battery Pack 141

SD Card 141

7

Built-in Rechargeable Lithium

Battery 142

Disposal 142

Maintenance/Others 143

Cleaning 143

Condensation 143

Viewing the Certification Logo 143

Using the Camcorder Abroad 144

Optional Accessories 145

Specifications 148

Reference Tables 151

Approximate recording times 151

Charging, Recording and Playback

Times 152

Index 154

About this Manual

8

Introduction

About this Manual

Thank you for purchasing the Canon XA45 / XA40. Please read this manual carefully before you use

the camcorder and retain it for future reference. Should your camcorder fail to operate correctly, refer

to

Troub leshoo ting

(A 132).

Conventions Used in this Manual

• IMPORTANT: Precautions related to the camcorder’s operation.

• NOTES: Additional topics that complement the basic operating procedures.

• A: Reference page number within this manual.

• s: Used as an abbreviation for the model indicated in the icon. The icon refers to text and

illustrations that apply only to the indicated model.

• The following terms are used in this manual:

“SD card” refers to an SD, SDHC or SDXC memory card.

“Screen” refers to the LCD screen and the viewfinder screen.

“Clip” refers to one movie unit from the point you press the START/STOP button to start recording

until you press again to pause the recording.

• The photos included in this manual are simulated pictures taken with a still camera. Unless indicated

otherwise, illustrations and menu icons refer to the s.

• Some screenshots in this manual have been simplified to show only relevant icons.

IMPORTANT

• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so

may result in permanent data loss or damage to the memory.

- Do not disconnect the power source or turn off the camcorder.

- Do not open the SD card compartment cover.

- Do not change the camcorder’s camera mode.

- Do not set the camcorder to MEDIA mode.

- When a USB cable is connected to the camcorder, do not disconnect the USB cable.

1

Introduction

About this Manual

9

Brackets [ ] are used to

refer to onscreen buttons

and menu options you will

select and to other

onscreen messages and

displays.

These icons indicate the camcorder’s operating mode and whether a function is available in that

mode.

: Indicates whether the

camcorder is in shooting (CAMERA) or

playback (MEDIA) mode. In this example, the

function is available only in mode. For

details, refer to

Turning the Camcorder On

and Off

(A 24).

: Indicates the camera mode. For

details, refer to

Setting the Camera Mode

(A 25).

The > arrow is used to abbreviate menu

selections. For details on how to use the

menus, refer to

Using the Menus

(A 28).

For a summary of available menu options

and settings, refer to the appendix

Menu

Options

(A 117).

Supplied Accessories

10

Supplied Accessories

The following accessories are supplied with the camcorder:

CA-570 Compact Power Adapter

(incl. power cord)

Ferrite core BP-820 Battery Pack

Microphone holder unit

(incl. screws)

Handle unit (incl. screws) Lens hood with lens barrier

Lens cap Quick Guide

Names of Parts

11

Names of Parts

1 Lens barrier switch (A 35)

2SD card slot 2 (A 31)

3SD card slot 3 (A 31)

4 u (review recording) button (A 37)/

Assignable button 5 (A 90)

5Lens hood (A 20)

6 Focus/Zoom ring (A 57, 62)

7 CUSTOM (customizable) dial (A 89)

8 CUSTOM (customizable) button

(A 89)

9 INFRARED switch (A 85)

10 SD card compartment cover

11 DISP (onscreen display) button

(A 84)/BATT. INFO (battery

information) button (A 18)

32

4

119108765

1

Left side view

Names of Parts

12

1 Built-in speaker (A 104)

2MIC terminal (A 73)

3 HDMI OUT terminal (A 110, 111)

4 REMOTE terminal (A 86)

For connecting commercially

available remote controllers.

5 s SDI OUT terminal (A 111)

6 × (headphones) terminal (A 81)

7USB terminal (A 87)

8DC IN terminal (A 16)

9 Grip belt (A 22)

26

7

3

4

5

9

1

8

Right side view

Names of Parts

13

1 Instant AF sensor (A 65, 143)

2 AF/MF button (A 62)/

Assignable button 1 (A 90)

3 PRE REC (pre-recording) button

(A 83)/

Assignable button 2 (A 90)

4LCD touch screen (A 20)

5 Focus/Zoom ring switch (A 57, 62)

6 Viewfinder (A 21)

7 Dioptric adjustment lever (A 21)

8 Joystick/SET button (A 25)

9Strap mount (A 22)

10 Assignable button 3 (A 90)

11 Assignable button 4 (A 90)

12 Battery attachment unit (A 16)

13 START/STOP button (A 35)

14 MENU button (A 28)

15 Serial number

1

45

6

7

8

9

14

15

13121110

3

2

Front view

Back view

Names of Parts

14

1 Power switch (A 24)

2 POWER / CHG (battery charging)

indicator (A 16)

3 Built-in stereo microphone

(A 73)

4 Accessory shoe

5 Camera mode switch (A 25)

6 Grip zoom rocker (A 58)

7 ACCESS indicator (A 35)

8 Handle unit mount (A 19)

9 Lens hood mount index mark

10 Tripod socket

For mounting the camcorder on a

tripod with a mounting screw 6.5 mm

(0.26 in.) or shorter.

11 BATTERY RELEASE switch (A 17)

12 Eye cup (A 21)

3

4

5

6

7

8

1

2

9

10

11

12

Top view Bottom view

Names of Parts

15

Handle unit

1 Microphone holder unit (A 73)

2 Microphone lock screw (A 73)

3 Accessory shoe

4 Handle zoom rocker (A 58)

5START/STOP lock (C) lever (A 36)

6 START/STOP button (A 35)

7 Sensitivity selection switches for

INPUT 1 and INPUT 2 (A 76)

8 INPUT terminal ON/OFF switch

(A 78)

9 Audio level switches for CH1 and

CH2 (A 77)

10 Audio level dials for CH1 and CH2

(A 77)

11 Microphone cable clamp (A 75)

12 INPUT 1 and INPUT 2 terminals

(collectively referred to as "INPUT

terminals") (A 76)

13 Infrared light (A 85)

14 Tally lamp (A 35)

15 Handle unit front screw (A 19)

16 Handle unit rear screws (A 19)

23 4 5 6 7 8 9 10

161514131211

1

Attaching the Ferrite Core

16

Preparations

Attaching the Ferrite Core

Attach the enclosed ferrite core before you connect the compact power adapter to the camcorder.

Attaching the ferrite core to the compact power adapter cable is necessary to suppress RF

interference.

Attach the ferrite core to the cable about 6 cm (2.4 in.) from the

DC plug (the plug to be connected to the DC IN terminal).

Pass the cable through the center of the core and wrap it around the

core (as shown in the illustration), then close the unit until it clicks shut.

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the supplied CA-570 Compact

Power Adapter.

1 Connect the compact power adapter to the

camcorder and plug the power cord into a power

outlet.

2 Attach the battery pack to the camcorder.

• Press the battery pack softly into the battery attachment

unit and slide it forward until it clicks in place.

DC IN terminal

2

Preparations

Charging the Battery Pack

17

3 Charging will start when the camcorder is turned off.

• If the camcorder was on, the green POWER/CHG indicator

will go out when you turn off the camcorder. After a

moment, the POWER/CHG indicator will turn on in red

(battery pack charging). The red POWER/CHG indicator will

go out when the battery pack is fully charged.

• If the indicator flashes, refer to

Troubleshooting

(A 134).

To remove the battery pack

1 Slide the BATTERY RELEASE switch in the direction of the

arrow and hold it pressed down (

햲).

2 Slide the battery pack and then pull it out (

햳).

IMPORTANT

• Turn off the camcorder before connecting or disconnecting the compact power adapter. After you

turn off the camcorder, important data is updated on the SD card. Be sure to wait until the green

POWER/CHG indicator goes out.

• When using the compact power adapter, do not fix it permanently to one place as this may cause a

malfunction.

• Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical

equipment that is not expressly recommended for use with this camcorder.

• To prevent equipment breakdowns and excessive heating, do not connect the supplied compact

power adapter to voltage converters for overseas travels or special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

NOTES

• We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and

86 °F). If either the ambient temperature or the battery pack’s temperature is outside the range of

approx. 0 °C to 40 °C (32 °F to 104 °F), charging will not start.

• The battery pack will be charged only when the camcorder is off.

• If the power supply was disconnected while charging a battery pack, make sure the POWER/CHG

indicator has gone out before restoring the power supply.

POWER/CHG (battery charging) indicator

BATTERY

RELEASE

switch

Charging the Battery Pack

18

• If remaining battery time is an issue, you can power the camcorder using the compact power

adapter so the battery pack will not be consumed.

• Charged battery packs continue to discharge naturally. Therefore, charge them on the day of use, or

the day before, to ensure a full charge.

• The first time you use a battery pack, fully charge it and then use the camcorder until the battery

pack is completely depleted. Doing so will ensure that the remaining recording time will be displayed

accurately.

• We recommend that you prepare battery packs to last 2 to 3 times longer than you think you might

need.

• For handling precautions regarding the battery pack, refer to

Safety Instructions and Handling

Precautions

(A 139).

• For charging times and approximate usage times, refer to

Reference Tables

(A 151).

Checking the Remaining Battery Charge

With the camcorder turned off, press the BATT. INFO button to display for about 5 seconds a screen

showing the approximate battery charge level. Note that if the battery charge is too low, the battery

information screen may not appear.

Preparing the Camcorder

19

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the handle unit and

lens hood, and adjusting the viewfinder and LCD screen.

IMPORTANT

• Be careful not to drop the camcorder when attaching, removing or adjusting the various

accessories. Using a table or other stable surface is recommended.

Attaching the Microphone Holder Unit

Use the supplied screws to attach the microphone holder unit to

the handle unit.

Attaching the Handle Unit

1 Slide the front of the handle unit into the accessory

shoe, as shown in the illustration. Then, slide the handle

unit forward all the way.

• Make sure the front and rear screws are raised when you

slide the handle unit.

2 Turn the front screw and two rear screws to secure the

handle unit.

NOTES

• The camcorder is functional even if you remove the handle

unit. However, some audio options (A 73), the infrared light

(A 85) and tally lamp will not be available.

Preparing the Camcorder

20

Using the Lens Hood

While recording, the supplied lens hood with lens barrier is

effective for reducing stray light that can be the cause of lens

flare and ghost images. Additionally, closing the lens barrier

can help prevent fingerprints and dirt accumulation on the

lens.

1 Remove the lens cap.

2 Align the mark on the lens hood with the lens hood

mount index mark on the bottom of the camcorder

(

햲), and then turn the lens hood clockwise until it

stops with a click

(햳).

• Be careful not to deform the lens hood.

• Make sure that the lens hood is aligned with the thread.

• To remove the lens hood, turn it counterclockwise.

NOTES

About the lens cap:

• Use the supplied lens cap when carrying the camcorder or storing it after use.

• Note that the lens cap and the lens hood with lens barrier cannot be used simultaneously.

Adjusting the LCD Screen

Open the LCD panel 90 degrees.

• You can rotate the panel downward or toward the lens.

• Rotating the LCD toward the lens can be useful to allow the subject to monitor the LCD screen while

you use the viewfinder.

NOTES

• You can adjust the brightness of the LCD screen with the > [£ Display Setup] > [LCD

Brightness] or [LCD Backlight] setting. Also, you can hold the DISP button pressed down for more

than 2 seconds to change the [LCD Backlight] setting between bright and normal or from dim to

normal.

Subject can monitor the LCD screen

La pagina si sta caricando...

Canon XA40 Manuale utente

Questo manuale è adatto anche per

Canon XA40 Manuale utente

in altre lingue

Documenti correlati

Altri documenti