Star Trac Spinner Blade Ion 7220 Manuale del proprietario

SPINNER

®

BLADE ION™

MANUFACTURED BY STAR TRAC

INSTALLATION & OWNER’S MANUAL

2

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

3

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

Table Of Contents

Introduction 4

Manufacturer 4

Warranty 4

Customer Support 4

Safety Instructions 4

Precautions 5

Safeguards 12

Assembly and Setup 13

Assembly Instructions 14

Watts Computer Set-Up 28

Drivetrain Setting 28

load Cell Sensor Calculation 30

Watts Offset 32

Testing Bike 34

Instructions 35

Seat Adjustment 35

Handlebar Adjustments 36

Pedal Strap Adjustment 36

Resistance Control 37

User Information 38

Bike Setup 38

Training Information 39

Dismounting Bike 39

Spinner Blade Ion Computer 40

Orientation 41

Getting Started 41

Maintenance Mode 45

Pairing ANT+ Devices 48

Why Maintenance 49

Maintenance 50

Moving and Leveling 50

Preventive Maintenance 50

Daily Maintenance 50

Weekly Maintenance 51

Monthly Maintenance 51

Inspection and Adjustment 51

Frame Care 52

Parts Replacement 52

Adjustments 53

Frequently Asked Questions 54

4

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

Introduction

This manual will acquaint you with the assembly, operation and maintenance of your Spinner

®

indoor cycling bike.

This manual provides information and instructions for the following Spinner indoor cycling bike models:

 7220 Series - Spinner

®

Blade ION™ manufactured by STAR TRAC

®

Be sure to read and follow the information and instructions for your specific model before assembly, using or servicing your indoor cycling

bike.

Manufacturer

STAR TRAC

4400 NE 77

th

Avenue, Suite 300

Vancouver, WA 98662

Telephone: (800) 228-6635, (714) 669-1660

Fax: (714) 508-3303

http://www.startrac.com

Warranty

Frame is covered for ten (10) years from the date of purchase for structural failure. Additionally, the Spinner

®

Blade ION™ Frame is

warranted for five (5) years from the date of purchase against build up and propagation of rust. Flywheel Assembly, Brake Knob

Assembly, Handlebar Assembly, Seat Post, and Foot Adjustments are covered for three (3) years from the date of purchase. Handle Bar

Post Plastic Sleeve, Seat Post Plastic Sleeve, Bottom Bracket Assembly, Seat Saddle Assembly, and Pop-Pin Assembly, are covered for

two (2) years for the date of purchase. Pedals, Chain, Brake Pad Assembly, Rubber Frame Guard, Brass Brake Nut and remaining parts

are covered for one (1) year from the date of purchase. An advance warranty replacement kit of wear items is included, consisting of: one

(1) Brake Pad and two (2) Pedal Straps.

Customer Support

If any items need replacement contact the Star Trac Customer Support Department at 800-503-1221 or 714-669-1660.

Safety Instructions

This chapter includes precautions and fitness safeguards for the installation and use of the SPINNER Blade ION manufactured by

STAR TRAC. Please read this chapter carefully before installing or using your equipment.

Safety instructions are provided in the following languages (in the order shown):

 English

 Dutch

 French

 Italian

 Portuguese

 Spanish

 Swedish

 Chinese

 Japanese

5

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

Precautions

These safety notes are directed to you as the owner of the Spinner

®

Blade ION™ manufactured by Star Trac. Please train all your users

and fitness staff to follow these safety instructions.

DO

DO NOT

 Do encourage each of your users to discuss their health

program or fitness regimen with a healthcare professional.

 Do not let unsupervised children operate the bike

 Do stop operating your bike if you feel dizzy or faint.

 Do not use without proper athletic shoes or cycling shoes.

 Do perform regular preventative maintenance.

 Do not use in rainy weather outdoors, or in an enclosed pool

environment.

 Do exercise slowly until you reach a level of comfort.

 Do not drop or insert any object, hands, or feet into any

opening or within the area of the flywheel.

 Do use the bike only for its intended use, as described in this

manual.

 Do not attempt to remove any shrouds or modify the bike.

WARNING

Your Star Trac Spinner Blade ION™ is designed for aerobic exercise in a commercial or consumer environment.

Please check with your physician prior to beginning any exercise program.

Do not push yourself to excess. Stop if you are feeling faint, dizzy, or exhausted. Use common sense when biking.

Read the owner’s manual in its entirety before operating the bike.

Failure to obey this warning can result in injury or death.

STAR TRAC

®

and the Star Trac logo are registered trademarks of Core Industries.

Spin

®

, Spinner

®

, Spinning

®

and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.

Smart Release™ is a registered trademark of Nautilus, Inc.

SPD is a registered trademark of Shimano American Corporation

ANT+™ is a registered trademark of Dynastream Innovations Inc.

6

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

AVERTISSEMENT

Le Spinner Blade ION manufactured by Star Trac est conçu pour l'exercice aérobique dans un

environnement commercial ou privé.

Veuillez consulter un médecin avant de commencer tout programme d'exercice.

Ne vous poussez pas au-delà de vos limites. Arrêtez-vous si vous vous sentez faible, étourdi ou

épuisé. Faites preuve de bon sens lorsque vous vous entraînez.

Lisez le guide de l'utilisateur en entier avant d'utiliser le bike.

Le non-respect de ces avertissements peut se traduire par des blessures, voire la mort.

VOORZORGSMAATREGELEN

Deze veiligheidsaantekeningen zijn aan u gericht als eigenaar van de Spinner

®

Blade ION™ manufactured by Star Trac. Gelieve uw

gebruikers en uw per- soneel voor conditietraining volledig bekend te maken met deze veiligheidsinstructies.

Doe het volgende:

■ Moedig elk van uw gebruikers aan hun gezondheidspro-

gramma of conditietherapie met een professioneel uit de

gezondheidszorg te bespreken.

■ Stop het gebruik van uw bike als u zich duizelig of

een flauwte voelt.

■ Voer regelmatig preventief onderhoud uit.

■ Oefen langzaam totdat u een comfortniveau

heeft bereikt.

■ Gebruik de bike alleen voor zijn bedoelde gebruik,

zoals in deze handleiding staat beschreven.

Doe het volgende NIET:

■ Laat kinderen zonder toezicht de bike niet bedienen.

■ Niet zonder gymschoenen gebruiken.

■ Niet buiten bij regenachtig weer gebruiken, of in dichte

ruimte met een zwembad.

■ Laat geen enkel voorwerp in de bike vallen en steek uw

handen of voeten in geen enkele opening van of

onder uw Bike.

■ Probeer geen omhulsels te verwijderen of uw bike te

wijzigen.

WAARSCHUWING

Uw Spinner Blade ION™ manufactured by Star Trac is ontworpen voor aërobische oefeningen in een

commerciële of gebruiker- somgeving.

Zie uw arts vóór het beginnen van een oefenprogramma.

Dwing uzelf niet tot buitensporige oefeningen. Stop als u zich duizelig, uitgeput of een flauwte voelt.

Lees de gebruikershandleiding helemaal en aandachtig door alvorens uw bike te bedienen. Nalaten

deze waarschuwing op te volgen kan letsel of overlijden tot gevolg hebben.

PRÉCAUTIONS

Ces consignes de sécurités s'adressent aux propriétaires du Spinner

®

Blade ION™ manufactured by Star Trac. Veuillez instruire tous

vos utilisateurs et instructeurs à suivre ces consignes.

À Faire

■ Encouragez tous les utilisateurs à consulter un médecin

au sujet de leur programme de fitness ou régime

d'exercice.

■ Cessez d'utiliser le bike en cas d'étourdissement ou de

faiblesse.

■ Exécutez régulièrement la maintenance préventive.

■ Commencez l'exercice lentement jusqu'à ce que

vous atteignez un niveau confortable.

■ Utilisez le bike uniquement de la manière prévue,

telle que décrite dans ce manuel.

À éviter

■ Ne laissez pas des enfants utiliser le bike sans sur-

veillance.

■ Ne l'utilisez pas sans porter de chaussures d'athlétisme.

■ Ne l'utilisez pas en extérieur lors de temps pluvieux, ni

en intérieur dans une salle de piscine.

■ Évitez de laisser tomber tout objet ou d'introduire les

mains ou pieds dans toute ouverture ou en-dessous du

Bike.

■ Ne tentez pas de retirer tout carter de protection ni de

modifier le bike.

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

7

VORSICHTSMASSNAHMEN

Die folgenden Vorsichtsmaßnahmen richten sich an Sie als Besitzer des Spinner

®

Blade ION™ manufactured by Star Trac. Bitte

schulen Sie alle Ihre. Benutzer und Ihr Fitness-Personal in der Beachtung dieser Sicherheitsvorschriften.

Gebote

■ Legen Sie jedem Ihrer Benutzer nahe, sein

Gesundheits- oder Fitnessprogramm mit einem medi-

zinischen Fachmann zu besprechen.

■ Beenden Sie den Betrieb Ihres bike, wenn Sie sich

schwindelig oder schwach fühlen.

■ Führen Sie regelmäßige vorbeugende Wartungsmaßnahmen

durch.

■ Trainieren Sie langsam, bis Sie eine gewisse

Komfortzone erreichen.

■ Verwenden Sie den bike nur zum vorgesehenen, in

dieser Anleitung beschriebenen Zweck.

Verbote

■ Lassen Sie den bike nicht von unbeaufsichtigten

Kindern in Betrieb nehmen.

■ Benutzen Sie das Gerät nicht ohne Sportschuhe.

■ Benutzen Sie das Gerät bei regnerischen

Witterungsbedingungen nicht im Freien und nicht in

einer geschlossenen Schwimmbadumgebung.

■ Lassen Sie keine Gegenstände in irgendwelche Öffnun-

gen oder unter den Bike fallen und halten Sie Hände

und Füße von diesen Bereichen fern.

■ Unternehmen Sie keinen Versuch, irgendwelche

Abdeckungen zu entfernen oder den bike zu modi-

fizieren.

ACHTUNG

Der Spinner Blade ION™ manufactured by Star Trac ist für aerobische Übungen in einer kommerziellen oder

Verbraucherumgebung vorgesehen.

Bitte holen Sie vor Aufnahme eines jeden Trainingsprogramms den Rat Ihres Arztes ein.

Trainieren Sie nicht übertrieben hart. Hören Sie auf, wenn Sie ein Schwäche-, Schwindel- oder

Erschöpfungsgefühl verspüren. Lassen Sie sich beim Schritttraining von Ihrer Vernunft leiten.

Lesen Sie vor Inbetriebnahme Ihres bike die Bedienungsanleitung vollständig durch.

Ein Missachten dieses Achtungshinweises kann Verletzungen oder den Tod zur Folge haben.

PRECAUZIONI

Queste note precauzionali sono dirette a voi, come proprietario dello Spinner

®

Blade ION™ manufactured by Star Trac. Siete pregati di

istruire i vostri uten- ti e il vostro personale all'osservanza di queste precauzioni.

Da Fare

■ Incoraggiate i vostri utenti a discutere il loro programma

di salute o di fitness con uno specialista dell'healthcare.

■ Interrompete l'uso dello bike se avete giramenti di

testa o se vi sentite mancare.

■ Eseguite periodicamente servizi di manutenzione.

■ Utilizzate lo bike soltanto per l'uso è a cui è destina- to,

come descritto nel manuale.

Da Non Fare

■ Non consentite a bambini di usare lo bike senza la

supervisione di un adulto.

■ Non utilizzate lo Bike senza scarpe atletiche.

■ Non utilizzate lo Bike all'esterno in condizioni piovose o

in un ambiente con piscina interna.

■ Non lasciate cadere oggetti sullo bike e non inserite

oggetti, mani o piedi in qualsiasi apertura esterna

o sotto lo Bike.

■ Non cercate di rimuovere le coperture o di modificare lo

Bike.

AVVERTENZE

Lo Spinner Blade ION manufactured by Star Trac è stato realizzato per esercizi di aerobica in un ambiente pubblico o

privato adeguato.

Prima di iniziare un programma di esercizio fisico, consultate il vostro medico.

Non eccedete i vostri limiti. Fermatevi se vi sentite mancare, se avete giramenti di testa o se vi sentite

esausti. Usate buon senso nell'utilizzo dell'attrezzatura.

Leggete il Manuale dell'utente interamente prima di utilizzare lo bike.

La mancata osservanza di queste avvertenze può comportare lesioni gravi o morte.

8

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

PRECAUÇÕES

Estas notas de segurança destinam-se a você, proprietário do Spinner

®

Blade ION™ manufactured by Star Trac. Treine todos os

usuários e o pessoal da academia para que sigam estas instruções de segurança.

O que fazer

■ Incentive todos os usuários a discutirem seu programa

de saúde ou sistema de condicionamento físico com um

profissional da área de saúde.

■ Pare o funcionamento do bike se sentir tontura ou

vertigem.

■ Efetue a manutenção preventiva regular.

■ Faça exercícios lentamente até atingir um grau de con-

forto.

■ Use o bike apenas de acordo com a finalidade para

que se destina, conforme descrito neste manual.

O que não fazer

■ Não deixe crianças sem supervisão operarem o bike.

■ Não use sem os sapatos esportivos apropriados.

■ Não utilize em ambientes externos quando o tempo

estiver chuvoso, nem em um ambiente fechado de pisci-

na interna.

■ Não deixe cair nem insira nenhum objeto, mãos ou pés

em qualquer abertura ou sob o bike.

■ Não tente remover nenhum degrau nem modificar seu

Bike.

ADVERTÊNCIA

Seu Spinner Blade ION™ manufactured by Star Trac foi projetado para exercícios aeróbicos em um ambiente

comercial ou próprio do consumidor.

Consulte seu médico antes de começar qualquer programa de exercícios.

Não se esforce demais. Pare se sentir tontura, vertigem ou exaustão. Tenha bom senso ao fazer o exercício.

Leia todo o Manual do Proprietário antes de operar o seu bike.

Deixar de observar esta advertência pode resultar em ferimentos ou morte.

PRECAUCIONES

Estas notas de seguridad están dirigidas a usted como el dueño de Spinner

®

Blade ION™ manufactured by Star Trac. Por favor

instruya a todos sus usuar- ios y personal de entrenamiento para que sigan estas instrucciones de seguridad.

Lo que se debe hacer

■ Dígale a cada uno de sus usuarios que discuta su pro-

grama de salud o régimen de ejercicio con un

profe- sional de la salud.

■ Deje de operar su bike si se siente mareado o como

que va a desmayarse.

■ Lleve a cabo mantenimiento preventivo a intervalos reg-

ulares.

■ Haga ejercicio lentamente hasta que alcance un nivel en

el que se sienta cómodo.

■ Utilice el bike solamente para lo que fue diseñado,

como se describe en este manual.

Lo que no se debe hacer

■ No permita que los niños operen su bike sin super-

visión.

■ No lo use sin zapatos atléticos.

■ No lo utilice afuera en la lluvia ni en un ambiente cerra-

do donde haya una piscina.

■ No lo deje caer ni inserte objetos, manos o pies

en ninguna apertura de su Bike ni debajo de él.

■ No intente quitar ninguna cubierta o recubrimiento ni

modificar su bike.

ADVERTENCIA

Su Spinner Blade ION manufactured by Star Trac está diseñado para el ejercicio aerobic en un ambiente

commercial o de consume.

Por favor consulte con su médico antes de iniciar cualquier programma de ejercicio.

No haga un esfuerzo excesivo. Deténgase si se siento mareado, exhaust o como si fuera a desmayarse. Use

su sentido común al hacer ejercico.

Lea completamente el Manual del dueño antes de operar su bike.

El no cumplir con esta advertenicia puedo resultar en una lesión o en la muerte.

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

9

Spinner Blade ION manufactured by Star Trac är avsedd för aerobisk träning i kommersiella eller konsumentinriktade

miljöer.

Konsultera din läkare innan du inleder något träningsprogram.

Driv inte dig själv för hårt. Sluta om du känner dig yr, svimfärdig eller utmattad. Använd bike med sunt förnuft.

Läs igenom hela handboken innan du använder bike.

Underlåtelse att iaktta dessa varningar kan medföra skada eller dödsfall.

FÖRSIKTIGHETSÅTGÄRDER

Dessa säkerhetsanmärkningar är riktade till dig i egenskap av ägare av Spinner

®

Blade ION™ manufactured by Star Trac. Var god

utbilda alla användare och all personal att följa dessa säkerhetsanvisningar.

Man ska

■ uppmuntra alla användare att konsultera sitt hälso-

progam eller sin träningsregim med en läkare.

■ sluta använda bike om man känner sig yr eller svim-

färdig.

■ utföra regelbundet underhåll i förebyggande syfte.

■ motionera långsamt tills man når en komfortnivå.

■ endast använda bike för dess avsedda användning,

enligt beskrivning i denna handbok.

Man ska inte

■ låta barn använda bike utan uppsikt.

■ använda bike utan sportskor.

■ använda bike utomhus i fuktigt väder eller i ett innes-

lutet bassängområde.

■ tappa in eller föra in något föremål, händer eller fötter i

någon öppning, eller under bike.

■ försöka att avlägsna några skyddskåpor eller att modi-

fiera Bike.

VARNINGAR

10

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

bike

Spinner

bike

Spinner

®

Blade ION manufactured by Star Trac

Spinner Blade ION manufactured by Star Trac

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

11

Spinner

®

Blade ION manufactured by Star Trac

Spinner Blade ION manufactured by Star Trac

bike

12

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

Safeguards

NCTIONS

The following fitness safeguards and operating precautions are directed to purchasers and users of Spinner

®

indoor cycling bikes.

Club Managers should ensure that members and fitness staff are trained to follow these same instructions. Failure to follow these

safeguards may result in injury or serious health risk.

 Ensure that adjustment knobs (seat height, seat fore-and-aft, and handlebar) are properly secured and do not interfere with

range of motion during exercise.

 Children under the age of 16 should not ride the Spinner bike. The bike mechanism and ergonomics are designed for adult

use only.

 Do not insert any object, hands or feet into any openings, or expose hands, arms or feet to the drive mechanism or other

potentially moving part of the bike.

 The maximum weight for individuals riding the Spinner bike should not exceed 350 pounds (159 kilograms).

 Spinner bikes have a weighted flywheel and a fixed gear. This means that in order to stop, you must gradually slow your

pedal strokes rather than stopping abruptly. If you do need to stop immediately, push down on the resistance knob. Do not

dismount the bike or remove your feet from the pedals until both the pedals and the flywheel have stopped completely.

Failure to comply may lead to loss of control and serious injury.

 After exercising, turn the resistance knob to increase resistance so the pedals will not rotate freely and potentially injure

someone.

 If at any time you feel dizzy or have difficulty breathing, gradually stop pedaling and carefully dismount the bike.

 Listen to your body, ride at your own pace and set your bike’s resistance at the level that feels right for you.

 Keep children and pets away from the bike whenever it's in use.

 Never turn the pedal crank arms by hand.

 Stay hydrated. Drink water throughout your ride as needed.

 Always keep some resistance on the flywheel.

 Stay in control by executing all core movements and hand positions at a slow pace before attempting to increase your

speed. Do not attempt to ride the bike in a standing position at a high RPM until you have practiced at slower speeds.

 Focus on form, posture and making smooth transitions between movements.

 Do not use the bike without proper footwear. Never operate the bike with bare feet.

 Never remove your feet from the pedals while still in motion. Prevent your feet from coming out of the toe clip or shoe cage

by keeping shoe laces tucked in and foot straps pulled snug around your shoe. If your foot does become disengaged, push

down on the resistance knob to stop the flywheel’s motion.

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

13

Assembly & Setup

Use the following procedures to unpack and assemble your SPINNER

®

Blade ION™ manufactured by Star Trac.

UNPACKING AND PARTS LIST

Position the shipping carton so the “Heavy End” logo is located at the bottom. Open the top of the carton and fold back all four flaps.

Carefully tilt the box forward so that the box may be lifted to expose the bike. Remove all parts from the shipping carton and foam

inserts, and verify that the following parts are included in your shipment:

Spinner Blade ION™ Parts List

Description

Qty.

Description

Qty.

Main Frame Assembly

1

M8x1.25x30mm Hex Head Bolt

2

Handlebar

1

8mm Split Lock Washer

2

Seat and Slider Assembly

1

8mm Plain Washer

2

Handlebar Post

1

Threaded Foot Plate

2

Lower Seat Post

1

Seat Adjustment Pop-Pin

1

Front Foot Strut

1

Plastic Strain Relief Oval Clip

1

Pedals and Bolts (set of two; R and L)

2

Metal Oval Mounting Plate

1

Spinner Blade ION Console

1

M5x0.8x25mm Button Head Bolt

1

Load Sensor Plastic Block Covers Kit

1

M5x0.8x12mm Button Head Bolt

1

Tool Kit

1

Multi-Sized Open Wrench

1

Take time now to enter your Spinner Blade ION serial number in the space below (serial number is located on the bottom cross

member).

If parts are missing, or if you have any operational questions, please call Star Trac’s Service department at (800) 503-1221.

Have your serial number ready.

Serial No._____________________________________________

NOTE: If you are missing any of the parts listed above, inspect the packing material and the box for items that may have been

overlooked.

If parts are missing, or if you have any product questions, please call Star Trac’s Service Department at (800) 503-1221, please have

your Spinner’s serial number ready.

CAUTION: Damage to the bike during assembly is not covered as part of the limited Star Trac warranty. Take care not to drop or

lean the bike on the handle bar pop-pin. Carefully stand the bike up in the normal upright position on a stable surface so it will not tip

over during assembly.

14

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

ASSEMBLY INSTRUCTIONS

1. Unboxing the unit requires turning the sealed box

upside down to open the bottom flaps (Fig. 1).

Fig. 1

2. Return the opened box back to the upright position

(Fig. 2).

Fig. 2

3. Expose the packaged bike by pulling the box up (Fig.3).

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

15

Fig. 3

5. Remove the hardware pack, seat, handle bar post,

ION console, seat post, & spare parts pack from

the foam covering the front section of the Spinner

frame (Fig. 5).

Note: Do not remove any tape holding the two front

foam packing half’s until step 12.

Fig. 5

6. Tilt the packaged Spinner frame towards the heavy

flywheel end (Fig. 6) and remove the following: front

foot assembly, pedal set, & the rear foot assembly from

their packaged location.

Fig 6.

4. Remove the handle bar & its packaging (Fig. 4) from

the center packed location.

Note: Do not remove any tape holding the two front

foam packing half’s until step 12.

Fig 4.

16

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

7. Remove the foam packaging from the rear section of

the Spinner frame (Fig. 7).

Fig. 7

8. Locate the rear foot assembly along with the

corresponding hardware that secures it to the Spinner

frame (Fig. 8).

Hardware:

M8x1.25x30mm Hex Head Bolt

8mm Split Lock Washer

8mm Plain Washer

Threaded Two Hole Bar

Qty:

2

1

Fig. 8

9. Insert the threaded bar (Fig. 9) into each slot at the

bottom section of the rear foot bracket.

Fig. 9

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

17

10. Install the rear foot assembly (Fig. 10) and tighten

hardware using the supplied multi-sized open wrench.

Note: These bolts must be torqued between 35-40

Lb-Ft (47-54 Nm).

Fig. 10

11. Stand the Spinner frame on the opposite end and place

a piece of foam or cardboard under the seat post frame

section (Fig. 11).

Fig. 11

12. Split and remove (Fig. 12) the foam covering the front

of the Spinner frame.

Fig. 12

18

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

13. Locate the front foot assembly along with the

corresponding hardware that secures it to the Spinner

frame (Fig. 13).

Hardware:

M8x1.25x30mm Hex Head Bolt

8mm Split Lock Washer

8mm Plain Washer

Threaded Two Hole Bar

Qty:

2

1

Fig. 13

14. Insert the threaded bar (Fig. 14) into each slot at the

bottom section of the front foot bracket.

Fig. 14

15. Install the front foot assembly (Fig. 15) and tighten the

hardware using the supplied multi-sized open wrench.

Note: These bolts must be torque between

35-40 Lb-Ft (47-54 Nm).

Fig. 15

SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL |

19

16. Return the bike to the upright position (Fig.16).

Fig. 16

17. Locate the seat post and insert it into the appropriate

location on the Spinner frame (Fig. 17).

Fig. 17

18. Locate and install the seat height adjustment pop pin

onto the Spinner frame (Fig. 18) using the supplied

multi-sized open wrench.

Fig. 18

20

| SPINNER BLADE ION MANUFACTURED by STAR TRAC - OWNER’S MANUAL

19. Locate and mount the seat slider assembly onto the

seat post by relieving spring tension on the large knob

and pulling the small thumb pin located next to the

larger knob (Fig. 19).

Fig. 19

20. Locate the front handle bar height adjustment post

(Fig. 20) and remove the socket head cap screw from

the lower section using a 5mm hex key.

Fig. 20

21. Insert and drive the handle bar post to the lowest

possible position inside the Spinner frame (Fig. 21) by

pulling on the “T” style pull pin located above the front

SPIN badge.

Fig. 21

La pagina sta caricando ...

Star Trac Spinner Blade Ion 7220 Manuale del proprietario

Questo manuale è adatto anche per

Star Trac Spinner Blade Ion 7220 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti