Hoover HOZ7173WI WIFI Manuale utente

USER INSTRUCTIONS

OVENS

NOTICE D'EMPLOI ET D'INSTALLATION

DES FOURS ENCASTRABLES

CANDY HOOVER GROUP S.R.L. • Via Privata Eden Fumagalli • 20047 Brugherio Milano Italy

MANUALE D’ISTRUZIONI

FORNO

INSTRUCCIONES DE USO

HORNOS EMPOTRABLES

BEDIENUNGSANLEITUNG

BACKOFEN

KULLANIM KILAVUZU

FIRINLAR

POKYNY PRO UŽIVATELE

TROUBY

EN

FR

02

17

IT

ES

33

48

DE

64

TR

CZ

79

95

• HOZ7173 WIFI

Safety Indications

• WARNING: the appliance and accessible parts become hot during use.

Be careful not to touch any hot parts.

•WARNING: the accessible parts can become hot when the grill is in

use. Children should be kept at a safe distance.

•WARNING: ensure that the appliance is switched off before replacing

the bulb, to avoid the possibility of electric shocks.

•WARNING: in order to avoid any danger caused by the accidental

resetting of the thermal interruption device, the appliance should not

be powered by an external switching device, such as a timer, or be

connected to a circuit that is regularly switched on and off.

•WARNING: before initiating the automatic cleaning cycle:

- clean the oven door;

- remove large or coarse food residues from the inside of the oven using

a damp sponge. Do not use detergents;

- remove all accessories and the sliding rack kit (where present);

- do not place tea towels

• In ovens with meat probe it is necessary, before making the cleaning

cycle, close the hole with the nut provided. Always close the hole with

the nut when the meat probe is not used.

•Children under 8 should be kept at a safe distance from the appliance

if not continuously supervised.

•Children should not play with the appliance. The appliance can be

used by those aged 8 or over and by those with limited physical,

sensorial or mental capacities, without experience or knowledge of the

product, only if supervised or provided with instruction as to the

operation of the appliance, in a safe way with awareness of the possible

risks.

•Cleaning and maintenance should not be carried out by unsupervised

children.

•Do not use rough or abrasive materials or sharp metal scrapers to

clean the oven door glasses, as they can scratch the surface and cause

the glass to shatter.

•The oven must be switched off before removing the removable parts

and, after cleaning, reassemble them according the instructions.

EN 02

•Only use the meat probe recommended for this oven.

•Do not use a steam cleaner.

•Put the plug into a socket equipped with a third contact which

corresponds to the earth and which must be connected and in

operation. For models without a plug, attach a standard plug to the

cable that is able to bear the load indicated on the tag. The earth

conductor is yellow-green in colour. This operation should be carried

out by a suitably qualified professional. In case of incompatibility

between the socket and the appliance plug, ask a qualified electrician to

substitute the socket with another suitable type. Connection to the

power source can also be made by placing an omnipolar breaker

between the appliance and the power source that can bear the

maximum connected load and that is in line with current legislation. The

yellow-green earth cable should not be interrupted by the breaker. The

socket or omnipolar breaker used for the connection should be easily

accessible when the appliance is installed.

•If the power cable is damaged, it should be substituted with a cable or

special bundle available from the manufacturer or by contacting the

customer service department.

If the cable is damaged, replace it promptly in accordance with the

following instructions:

- open the cover of the terminal block;

- remove the power cable and substitute it with a similar cable which is

compatible with the appliance (type H05VV-F, H05V2V2-F).

•This operation should be carried out by a suitably qualified

professional. The earth conductor (yellow-green) must be

approximately 10 mm longer than the other conductors. For any

repairs, refer only to the Customer Care Department and request the

use of original spare parts.

•Failure to comply with the above can compromise the safety of the

appliance and invalidate the guarantee.

•Any excess of spilled material should be removed before cleaning.

•During the pyrolytic cleaning process, surfaces can heat up more than

usual, children should therefore be kept at a safe distance.

EN 03

Summary

EN 04

General Instructions

5

1.1 Safety indications

1.2 Electrical safety

1.3 Recommendations

1.4 Installation

1.5 Waste management

1.6 Conformity declaration

2.1 Overview

2.2 Accessories

2.3 First use

Product Description

7

3.1 Display description

3.2 Cooking modes

Use of the Oven

8

4.1 General notes on cleaning

4.2 Steam cleaning

4.3 Maintenance

• Removal and cleaning of grills

• Removal of the oven window

• Removal and cleaning of the glass

door

• Changing the bulb

Oven Cleaning and Maintenance

13

5.1 F.A.Q.

Troubleshooting

16

1. General Instructions

We thank you for choosing one of our products. For the

best results with your oven, you should read this

manual carefully and retain it for future reference.

Before installing the oven, take note of the serial

number so that you can give it to customer service staff

if any repairs are required. Having removed the oven

from its packaging, check that it has not been damaged

during transportation. If you have doubts, do not use

the oven and refer to a qualified technician for advice.

Keep all of the packaging material (plastic bags,

polystyrene, nails) out of the reach of children. When

the oven is switched on for the first time, strong

smelling smoke can develop, which is caused by the glue on the insulation panels surrounding the oven

heating for the first time. This is absolutely normal and, if it occurs, you should wait for the smoke to

dissipate before putting food in the oven. The manufacturer accepts no responsibility in cases where

the instructions contained in this document are not observed.

NOTE: the oven functions, properties and accessories cited in this manual will vary, depending on the

model you have purchased.

1.1 Safety Indications

Only use the oven for its intended purpose, that is only for the cooking of foods; any other use, for

example as a heat source, is considered improper and therefore dangerous. The manufacturer cannot

be held responsible for any damage resulting from improper, incorrect or unreasonable usage.

The use of any electrical appliance implies the observance of some fundamental rules:

- do not pull on the power cable to disconnect the plug from the socket;

- do not touch the appliance with wet or damp hands or feet;

- in general the use of adaptors, multiple sockets and extension cables is not recommended;

- in case of malfunction and/or poor operation, switch off the appliance and do not tamper with it.

1.2 Electrical Safety

ENSURE THAT AN ELECTRICIAN OR QUALIFIED TECHNICIAN MAKES THE ELECTRICAL CONNECTIONS.

The power supply to which the oven is connected must conform with the laws in force in the country of

installation. The manufacturer accepts no responsibility for any damage caused by the failure to observe

these instructions. The oven must be connected to an electrical supply with an earthed wall outlet or a

disconnector with multiple poles, depending on the laws in force in the country of installation. The

electrical supply should be protected with suitable fuses and the cables used must have a transverse

section that can ensure correct supply to the oven.

CONNECTION

The oven is supplied with a power cable that should only be connected to an electrical supply with 220-

240 Vac 50 Hz power between the phases or between the phase and neutral. Before the oven is

connected to the electrical supply, it is important to check:

- power voltage indicated on the gauge;

- the setting of the disconnector.

The grounding wire connected to the oven's earth terminal must be connected to the earth terminal of

the power supply.

WARNING

Before connecting the oven to the power supply, ask a qualified electrician to check the continuity of the

power supply's earth terminal. The manufacturer accepts no responsibility for any accidents or other

problems caused by failure to connect the oven to the earth terminal or by an earth connection that has

defective continuity.

EN 05

1.3 Recommendations

After each use of the oven, a minimum of cleaning will help keep the oven perfectly clean.

Do not line the oven walls with aluminium foil or single-use protection available from stores. Aluminium

foil or any other protection, in direct contact with the hot enamel, risks melting and deteriorating the

enamel of the insides. In order to prevent excessive dirtying of your oven and the resulting strong

smokey smells, we recommend not using the oven at very high temperature. It is better to extend the

cooking time and lower the temperature a little. In addition to the accessories supplied with the oven,

we advise you only use dishes and baking moulds resistant to very high temperatures.

1.4 Installation

The manufacturers have no obligation to carry this out. If the assistance of the manufacturer is required

to rectify faults arising from incorrect installation, this assistance is not covered by the guarantee. The

installation instructions for professionally qualified personnel must be followed. Incorrect installation

may cause harm or injury to people, animals or belongings. The manufacturer cannot be held

responsible for such harm or injury.

The oven can be located high in a column or under a worktop. Before fixing, you must ensure good

ventilation in the oven space to allow proper circulation of the fresh air required for cooling and

protecting the internal parts. Make the openings specified on last page according to the type of fitting.

NOTE: as the oven could require maintenance work, it is advisable to keep another wall socket available

so that the oven can be connected to this if it is removed from the space in which it is installed. The

power cable must only be substituted by technical service staff or by technicians with equivalent

qualifications.

1.5 Waste management and environmental protection

This appliance is labelled in accordance with European Directive 2012/19/EU regarding

electric and electronic appliances (WEEE). The WEEE contain both polluting substances

(that can have a negative effect on the environment) and base elements (that can be

reused). It is important that the WEEE undergo specific treatments to correctly remove and

dispose of the pollutants and recover all the materials. Individuals can play an important

role in ensuring that the WEEE do not become an environmental problem; it is essential to

follow a few basic rules:

- the WEEE should not be treated as domestic waste;

- the WEEE should be taken to dedicated collection areas managed by the town council or a registered

company.

In many countries, domestic collections may be available for large WEEEs. When you buy a new

appliance, the old one can be returned to the vendor who must accept it free of charge as a one-off, as

long as the appliance is of an equivalent type and has the same functions as the purchased appliance.

SAVING AND RESPECTING THE ENVIRONMENT

Where possible, avoid pre-heating the oven and always try to fill it. Open the oven door as infrequently

as possible, because heat from the cavity disperses every time it is opened. For a significant energy

saving, switch off the oven between 5 and 10 minutes before the planned end of the cooking time, and

use the residual heat that the oven continues to generate. Keep the seals clean and in order, to avoid any

heat dispersal outside of the cavity. If you have an electric contract with an hourly tariff, the "delayed

cooking" programme makes energy saving more simple, moving the cooking process to start at the

reduced tariff time slot.

1.6 Declaration of compliance

The parts of this appliance that may come into contact with foodstuffs comply with the provisions of EEC

Directive 89/109.

By placing the mark on this product, we are confirming compliance to all relevant European safety,

health and environmental requirements which are applicable in legislation for this product.

EN 06

2. Product Description

2.1 Overview

1

2

3

5

4

6

1. Control panel

2. Shelf positions

(lateral wire grid if included)

3. Metal grill

4. Drip pan

5. Fan (behind the steel plate)

6. Oven door

2.2 Accessories

Drip pan

1

Collects the residues that drip during the cooking

of foods on the grills.

EN 07

3

Led vision

Is an illumination system which replaces the

traditional « light bulb ». 14 LED (for non-pyrolitic

versions) or 10 High Power LED (for pyrolitic

versions) lights are integrated within the door.

These produce white high quality illumination

which enables to view the inside of the oven with

clarity without any shadows on all the shelves.

Advantages :

This system, besides providing excellent illumination

inside the oven, lasts longer than the traditional light

bulb its easier and to maintain and most of all saves

energy.

-Optimum view

-Long life illumination

-Very low energy consumption, -95% in comparison

with the traditional illumination.

Metal grill

2

Holds baking trays and plates.

All ovens with this technology boast a function

typical of professional models, the fruit of

innovative technologies and the vast experience

acquired by the Candy Hoover Group in this

sector. The Chef Panel is an air conveyor that

increases air circulation inside the oven. This

allows for an increase in oven cooking

performance, more standard cooking of food at

all temperatures, shorter cooking times and,

lastly, a uniform temperature distribution inside

the oven.

4

Chef Panel

2.3 First Use

PRELIMINARY CLEANING

Clean the oven before using for the first time. Wipe over external surfaces with a damp soft cloth. Wash

all accessories and wipe inside the oven with a solution of hot water and washing up liquid. Set the

empty oven to the maximum temperature and leave on for about 1 hour, this will remove any lingering

smells of newness.

3. Use of the Oven

3.1 Display description

EN 08

Cooking

duration

Cooking

end Timer

Clock

set

Child

lock

WiFi

ON / OFF

EXTRA

The oven is switched on and off with this button.

If the oven is switched off, the display shows the clock. When

the oven is inactive, all the functions are available except the

cooking duration and end of cooking.

If the clock is not set, the oven does not work: the display

flashes, showing "12:00" and the only functioning key is

Extra. From the Extra key, the following functions can be set:

Measures the internal temperature of food during

cooking. Insert the meat-probe into the hole on the top

of the cavity.

– Prepare the food and properly insert the meat probe

into the food. Do not preheat or start cooking before

properly inserting the meat probe. Probe should be

inserted into the food and receptacle while the oven is

still cool.

– Do not insert the meat probe in the frozen food.

– Do not leave the meat probe inside the oven when it's not used: it could damage.

5

Meat-probe (depends on the oven model)

NB: can only be set with an

active cooking programme.

Press EXTRA twice and set

the time using the “+” and

“-” keys, confirming by

pressing "SELECT".

The display shows “00:00”

if no cooking duration has

been inserted, otherwise

the display shows the time

remaining.

When a cooking programme

t er m i n a t e s , t h e o v e n

switches off whi le the

display shows "END" (the

cooking programme icon

remains on) until the On/Off

button, the only functioning

key, is pressed. When a

c o o k i n g p r o g r a m m e

terminates, an alarm will

sound.

When the cooking time has

f i n i s h e d , t h e o v e n

automatically switches off and

the alarm sounds for a few

seconds.

FUNCTION HOW TO DEACTIVATE WHAT IT DOES WHY IT IS NEEDED

END OF

COOKING

DURATION

SETTING

THE CLOCK

TIMER

HOW TO USE

NB: can only be set with an

active cooking programme.

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

Press EXTRA enough times

to illuminate the icon, set

the end of cooking time

using the “<” and “>” keys

and confirm by pressing

"SELECT".

The cooking duration is

automatically calculated.

•This function is also used for

cooking that can be scheduled

in advance.

•If a cooking programme is set,

it will be lost if the "F" key is

pressed.

•If delayed cooking is set, the

oven switches off and the

display shows the current time

while the cooking programme,

cooking duration and end of

cooking icons are illuminated.

•If a cooking programme is set,

by pressing the “<” and “>”

keys you can see and modify

the temperature set: at the first

t o u c h , t h e o p e r a t i n g

temperature is shown while

another touch will allow you to

modify said temperature.

To modify the end of

cooking before the set

time, press EXTRA enough

times to illuminate the

icon, regulate the end of

cooking time as required

using the “<” and “>” keys

and confirm by pressing

"SELECT".

To can cel t he en d of

cooking time, reset the

display to “00:00”.

W h e n a c o o k i n g

programme terminates,

the oven switches off while

the display shows "END"

(the cooking programme

icon remains on) until the

On/Off button, the only

functioning key, is pressed.

W h e n a c o o k i n g

programme terminates, an

alarm will sound.

•This function is useful

when there are children in

the house.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

activate this function: the

display will show ON; to

confirm press SELECT.

•Press the EXTRA key

enough times to illuminate

the icon and then either

the “<” or “>” key to

deactivate this function:

the display will show OFF;

to confirm press SELECT.

•If the function is active

only the "Extra" button, to

deactivate the function,

and "On/Off" button can

be used.

• T h e a l a r m f u n c t i o n s

regardless of whether the

oven is switched on.

•Switched on for the first

t i m e , t h e d i s p l a y

illuminates and shows

"12:00".

•To modify the time, press

EXTRA enough times to

illuminate the icon and use

the “<” and “>” keys to set

the time, confirming it by

pressing SELECT.

•It allows you to set the

time that appears on the

display.

• T h e d i s p l a y s h o w s

“00:00” if no time has been

in se rt ed o r t he t i m e

rema ini ng if t his h as

already been set.

Press EXTRA enough times

to illuminate the icon and

use the “<” and “>” keys to

set the time, confirming by

pressing SELECT.

•To modify the timer, press

EXTRA enough times to

i l l u m i n a t e t h e i c o n ,

regulate the cooking time

as required using the “<”

and “>” keys and confirm

by pressing "SELECT".

•This function activates an

alarm that sounds for a few

seconds when the set time

expires (this function does

not switch the oven off).

You can select a time

between 00:00 and 23:59.

• T h e t i m e r f u n c t i o n s

regardless of whether the

oven is switched on.

•To modify cooking before

the set time, press EXTRA

twice and regulate the

cooking time as required

using the “<” and “>” keys,

before pressing "SELECT"

once more.

•To cancel the cooking

duration, reset the display

to “00:00”.

CHILD

SAFETY

EN 09

Pressing "Extra" on the timer display allows you to select the Wi-

Fi menu. In the Wi-Fi menu if you press the "< >" buttons you can select:

- Off: Wi-Fi is off; the oven is not controllable via the app.

- On: Wi-fi is on and the oven is only controllable via the app. It means that it is not possible to select cooking

functions, recipes and temperature from the display. Only the Wi-Fi menu is available by pressing "Extra". You

can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it can

only be switched on via the app.

- Reset: This setting should be used to enrol the oven the first time it connects to your Wi-Fi network and to

reset the current Wi-Fi connection to allow a new enrolment. Once selected, the appliance gives you 5

minutes to complete the enrolment process. During this process the cooking functions, recipes and

temperature setting are not accessible from the display. Only the Wi-Fi menu is available by pressing "Extra".

You can switch the oven off using the On/Off button, but you cannot switch it back on again via the display, it

can only be switched on via the app. To exit the enrolment/reset procedure via the display, press "Extra" and

then use "< >" buttons to select "Off". After five minutes, the appliance will exit the enrolment/reset

procedure automatically.

- Read: the oven sends its status to the app but it cannot be controlled remotely. The oven must be enrolled

before this is possible.

If Wi-Fi is not configured it is only possible to choose between off and reset.

When the oven is connected to Wi-Fi, the default cooking time duration is 5 hours, but this can be modified by

the user.

Wi-Fi Enrolment:

To enroll the appliance for Wi-Fi, press "Extra" on the display until the Wi-Fi icon lights, then select "Reset" by

pressing "< >". The procedure on the app should then be followed. Once selected, the appliance gives you 5

minutes to complete the enrolment process.

Wi-Fi icon

- icon not lit: Wi-Fi is off.

- Icon blinks 1 second on an 1 second off: the oven is accessible to your Wi-Fi network and ready to be enrolled.

If the enrolment has not been successful, the Wi-Fi icon will switch off after 5 minutes.

- Icon is permanently lit: the oven is connected to your Wi-Fi router.

- The icon blinks 3 seconds on and 1 second off: the oven is trying to connect to your Wi-Fi router.

- The icon blinks 1 second on and 3 seconds off: the oven is in read only mode.

WiFi (depends on the oven model)

HOOVER :

For detailed information on HOW TO CONNECT your OneFi appliance and HOW

TO USE IT effectively, go to http://wizardservice.candy-hoover.com/

Grill

Oven box

Turnspit

Circular

heating element

Bottom heating element

Fan

Defost

Pyro

LANGUAGE SETTING The language can be set when

the oven is switched off by pressing the Extra and Select

buttons simultaneously and for 3". The current language is

shown on the display and can be changed by pressing the

“<” or “>” keys, confirming it by pressing SELECT. Available

languages are: Italian, English, French and German.

SELECT Any selection must be confirmed. If not

confirmed within 15 seconds, the selection is cancelled.

By changing menu, any unconfirmed selection is lost.

“HOT” ICON When a cooking programme finishes or when the oven switches off, if the oven is still

hot, the display shows the current time alternating with the message “HOT” at 3" intervals.

EN 10

PRE-SETTED RECIPES When a recipe is selected the display shows “R” followed by the number of

the recipe and shows the correspondent way of cooking.

The available recipes are the following:

MEAT PROBE

RECOMMENDED TEMPERATURES

Meat

Rare

Medium rare

Medium

Well done

Salmon

Chicken

56

58

60

62

35

min 68

RECIPE

COOKING

METHOD

TEMPERATURE

COOKING

DURATION

R1- Lasagne

R2- Roast/Oven cooked chicken

R3- Crusted bream

R4- Baked potatoes

R5- Omelette

Static + fan

Static

150°

180°

160°

45’

40’

25’

Static + fan

180°

40’

45’

R6- Apple pie

Static + fan

180°

45’

EN 11

NB: It is not possible to change neither the temperature nor the cooking duration.

MEAT PROBE (depends on the oven model) If the meat probe is identified, the display shows

"PROBE"; if the meat probe is inserted once a cooking programme is underway, the programme stops.

When a cooking programme is selected, the display shows the default temperature but is never higher

than 200°C: the selectable temperature is also limited to 200°C.

When the temperature is confirmed, by pressing "Select", the display shows “Ϙ 40°”: it is now possible

to select the meat probe target temperature, between 30°C and 90°C at 1°C intervals. When the meat

probe temperature is confirmed, press the "Select" key and the display shows “Ϙ” followed by the

actual temperature taken by the meat probe (1 degree intervals). As soon as the meat probe reaches

the set temperature, the cooking programme terminates. If a cooking programme is set with the meat

probe, by pressing the “-” and “+” keys you can see and modify the temperature of the meat probe: at

the first touch of one of the two keys, the display shows the meat probe target temperature, while at the

next touch you can change the selected temperature of the probe.

If the user changes the cooking programme, the meat probe temperature setting is reset. Repeat the

setting sequence to select a new target temperature. The meat probe cannot be used with pre-set

cooking or with the separating plate (if present) inside the oven: in this case the display shows“Ϙ NO”

and will not execute any command until the meat probe is removed. Defrost, grill, any program with

turnspit, pyrolysis and any programmed cooking are not allowed with the meat probe (they are not

shown on the menu).

T °C

default

180

210

200

210

40

L3

T °C

range

40 ÷ 40

50 ÷ 240

50 ÷ 230

150 ÷ 220

50 ÷ 240

L1 ÷ L5

Function

Dial

Function (Depends on the oven model)

LAMP: Turns on the oven light.

GRILL: use the grill with the door closed.

The top heating element is used alone and you can adjust the temperature. Five

minutes preheating is required to get the elements red-hot. Success is guaranteed

for grills, kebabs and gratin dishes. White meats should be put at a distance from the

grill; the cooking time is longer, but the meat will be tastier. You can put red meats

and fish fillets on the shelf with the drip tray underneath. The oven has two grill

positions:

Grill: 2140 W Barbecue: 3340 W

FAN ASSISTED GRILL : use the turbo-grill with the door closed.

The top heating element is used with the fan circulating the air inside the oven.

Preheating is necessary for red meats but not for white meats. Ideal for cooking

thick food items, whole pieces such as roast pork, poultry, etc. Place the food to be

grilled directly on the shelf centrally, at the middle level. Slide the drip tray under the

shelf to collect the juices. Make sure that the food is not too close to the grill. Turn

the food over halfway through cooking.

FAN COOKING: We recommend you use this method for poultry, pastries, fish

and vegetables. Heat penetrates into the food better and both the cooking and

preheating times are reduced. You can cook different foods at the same time

with or without the same preparation in one or more positions. This cooking

method gives even heat distribution and the smells are not mixed.

Allow about ten minutes extra when cooking foods at the same time.

DEFROST: When the dial is set to this position. The fan circulates air at room

temperature around the frozen food so that it defrosts in a few minutes

without the protein content of the food being changed or altered.

*Tested in accordance with the CENELEC EN 60350-1 used for definition of energy class.

3.2 Cooking Modes

FAN + LOWER ELEMENT: The bottom heating element is used with the fan

circulating the air inside the oven. This method is ideal for juicy fruit flans, tarts,

quiches and pâté.

It prevents food from drying and encourages rising in cakes, bread dough and

other bottom-cooked food.

Place the shelf in the bottom position.

EN 12

*

220 50 ÷ 280

CONVENTIONAL COOKING: Both top and bottom heating elements are used.

Preheat the oven for about ten minutes. This method is ideal for all traditional

roasting and baking. For seizing red meats, roast beef, leg of lamb, game, bread,

foil wrapped food (papillotes), flaky pastry. Place the food and its dish on a shelf

in mid position.

*

BOTTOM: Using the lower element. Ideal for cooking all pastry based dishes.

Use this for flans, quiches, tarts, pate and any cooking that needs more heat

from below.

PIZZA - With this function hot air circulated in the oven to ensure perfect result

for dishes such as pizza or cake.

The "ECO" function allows you to cook in a healthier way, by reducing the amount of

fat or oil required. Thanks to the use of the grill and fan combined with a pulsating

cycle of air, it will retain the moisture content of the food, grilling the surface and

using a shorter cooking time, without compromising on taste.

It is particularly suitable for cooking meat, roasted vegetables and omelettes. The

cycle of pulsed air keeps the humidity inside the oven and the moisture content of

the food, preserving the nutritional values and ensuring a rapid uniform cooking

process.

Try all your recipes and reduce the amount of dressing you usually use and

experience the lightness of this new function!

210 50 ÷ 230

220 50 ÷ 230

190 50 ÷ 230

EN 13

4. Oven cleaning and maintenance

4.1 General notes on cleaning

The lifecycle of the appliance can be extended through regular cleaning. Wait for the oven to cool before

carrying out manual cleaning operations. Never use abrasive detergents, steel wool or sharp objects for

cleaning, so as to not irreparably damage the enamelled parts. Use only water, soap or bleach-based

detergents (ammonia).

GLASS PARTS

It is advisable to clean the glass window with absorbent kitchen towel after every use of the oven. To

remove more obstinate stains, you can use a detergent-soaked sponge, well wrung out, and then rinse

with water.

OVEN WINDOW SEAL

If dirty, the seal can be cleaned with a slightly damp sponge.

ACCESSORIES

Clean accessories with a wet, soapy sponge before rinsing and drying them: avoid using abrasive

detergents.

DRIP PAN

After using the grill, remove the pan from the oven. Pour the hot fat into a container and wash the pan in

hot water, using a sponge and washing-up liquid.

If greasy residues remain, immerse the pan in water and detergent. Alternatively, you can wash the pan

in the dishwasher or use a commercial oven detergent. Never put a dirty pan back into the oven.

4.2 Steam Cleaning

This procedure uses steam to help remove remaining fat and food particles from the oven.

1. Pour 300 ml of water into the bottom of the oven.

2. Set the oven function to Static ( )or Bottom heater ( ).

3. Set the temperature at 90°C.

4. Allow the program to operate for 30 minutes.

5. After 30 minutes switch off the program and allow the oven to cool down.

6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.

Warning: Make sure that the appliance is cool before you touch it.

Care must be taken with all hot surfaces as there is a risk of burns. Use distilled or drinkable water.

300 ml

REMOVAL AND CLEANING OF THE SIDE RACKS

1. Unscrew the bolt in an anti-clockwise direction.

2. Remove the side racks by pulling them towards you.

3. Clean the side racks in a dishwasher or with a wet sponge and then dry them immediately.

4. Having cleaned the side racks, put them back in and reinsert the bolts, ensuring that they are fully

tightened.

4.3 Maintenance

A

REMOVAL OF THE OVEN WINDOW

1. Open the front window.

2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them

downwards.

3. Replace the window by carrying out the procedure in reverse.

EN 14

LOW-E

1

2

3

1.

2.

3.

4.

5.

6.

7.

REMOVAL AND CLEANING OF THE GLASS DOOR

1. Open the oven door.

2.3.4. Lock the hinges, remove the screws and remove the upper metal cover by pulling it upwards.

5.6. Remove the glass, carefully extracting it from the oven door (NB: in pyrolytic ovens, also remove

the second and third glass (if present)).

7. At the end of cleaning or substitution, reassemble the parts in reverse order.

On all glass, the indication "Pyro" must be legible and positioned on the left side of the door, close to the

left-hand lateral hinge. In this way, the printed label of the first glass will be inside the door.

EN 15

CHANGING THE BULB

1. Disconnect the oven from the mains supply.

2. Undo the glass cover, unscrew the bulb and replace it with a new bulb of the same type.

3. Once the defective bulb is replaced, replace the glass cover.

5. Troubleshooting

5.1 FAQ

PROBLEM POSSIBLE CAUSE SOLUTION

The oven does not heat up

The clock is not set Set the clock

The child lock is on

A cooking function and

temperature has not been set

Deactivate the child lock

Ensure that the necessary

settings are correct

The oven does not heat up

EN 16

Steam and condensation on

the user interface panel

Clean with a microfiber

cloth the user interface

panel to remove the

condensation layer

No reaction of the touch

user interface

• ATTENTION: l'appareil et les parties accessibles deviennent chauds

pendant l'utilisation. Veillez à ne pas toucher les élements chauffants.

• MISE EN GARDE: les parties accessibles peuvent devenir chaudes

lorsque le gril est en cours d'utilisation. Les enfants doivent être

maintenus à une distance de sécurité.

• ATTENTION: le four doit éteint avant de changer l'ampoule, de être

manière à éviter tout risque de .choc électrique

•ATTENTION: pour éviter tout danger dû à une réinitialisation

accidentelle, cet appareil ne doit pas être alimenté par un dispositif de

commutation externe, comme une minuterie, ou connecté à un circuit

qui est régulièrement allumé et éteint par .l'utilisateur

• ATTENTION: avant d’activer la fonction de nettoyage automatique :

- nettoyer la porte du four

- enlever avec une éponge humide les résidus les plus gros. Ne pas

utiliser de détergents;

- sortir tous les accessoires ainsi que le kit éventuel de glissières

coulissantes ;

- ne pas placer de torchons ou de maniques sur la poignée du four.

• Dans les fours avec sonde à viande, il est nécessaire, avant d'effectuer

le cycle de nettoyage de refermer l'embout avec l'écrou fourni.

Refermer toujours le trou avec l'écrou lorsque la sonde de viande n'est

pas utilisé .

• Les enfants de moins de 8 ans doivent être tenus à l'écart à moins

d'être surveillés continuellement.

• Les enfants ne doivent pas jouer avec l'appareil. Cet appareil n'est pas

destiné à être utilisé par des personnes (y compris les enfants) dont les

capacités physiques, sensorielles ou mentales sont réduites, ou ayant

un manque d'expérience et de connaissances, à moins qu'elles n'aient

été formées à l'utilisation de l'appareil, par une personne responsable

de leur sécurité.

• Le nettoyage et entretien ne doivent pas être effectués par des

enfants sans surveillance.

• Ne pas utiliser de matériaux rêches, abrasifs, ou de racloirs

métalliques tranchants pour nettoyer les portes en verre du four car ils

peuvent rayer la surface entrainant des risques d'exposions.

FR 17

Conseils De Securite

•Le four doit être éteint avant le démontage des accessoires. Après

nettoyage, remonter les accessoires en suivant les instructions.

• Utilisez uniquement la sonde thermique recommandée pour ce four.

• Ne pas utiliser un nettoyeur à vapeur.

• Brancher la fiche dans une prise de courant équipée d’un troisième

contact correspondant à la prise de terre. Monter sur le fil une prise

normalisée capable de supporter la charge indiquée sur la plaquette. Le

fil conducteur de masse à la terre est identifié par les couleurs jaune et

vert. Veiller à ce que votre installation soit capable de supporter toute la

puissance absorbée par le four. Si votre installation électrique n’est pas

conforme faites la modifier par un électricien afin de prévenir tous

risques. On peut également effectuer le branchement au réseau en

interposant entre l’appareil et le réseau un interrupteur omnipolaire

dimensionnée en fonction de la charge et conforme aux normes en

vigueur. Le fil de terre jaune et vert ne doit pas être interrompu par

l’interrupteur. La prise et l’interrupteur omnipolaire utilisés doivent

être facilement accessibles une fois l’appareil électroménager installé.

• Si le cordon d'alimentation est endommagé, il doit être remplacé par

un cordon spécial disponible auprès du fabricant ou de stations de

dépannage agrées.

Si le câble est endommagé, remplacez-le rapidement en conformité

avec les indications suivantes:

- Ouvrir le couvercle de la boîte à bornes;

- Retirer le câble d'alimentation et le remplacer par un câble similaire

adaptée à l'appareil (type , H05V2V2-F).H05VV-F

• Cette opération doit être effectuée par du personnel qualifié. Le

conducteur de terre (jaune-vert) doit être environ 10 mm plus long que

les conducteurs de ligne. Pour toute réparation, reportez-vous

seulement à un centre de service technique agréé et demander

l'utilisation de pièces de rechange d'origine.

• Le non respect de ce qui précède peut compromettre la sécurité de

l'appareil.

• Tout excédent de produit déversé doit être enlevé avant de le

nettoyer.

• Pendant la pyrolyse, les surfaces peuvent chauffer plus que

d'habitude: les enfants doivent donc être maintenus à une distance de

sécurité.

FR 18

SOMMAIRE

FR 19

Instructions Générales

20

1.1 Indications de sécurité

1.2 Sécurité électrique

1.3 Recommandations

1.4 Installation

1.5 La gestion des déchets et la

protection de l'environnement

1.6 Déclaration de conformité

2.1 Vue d'ensemble

2.2 Accessoires

2.3 Première utilisation

Description du produit

22

3.1 Description de l'affichage

3.2 Mode de cuisson

Utilisation du Four

24

4.1 Remarques générales concernant

le nettoyage

4.2 Nettoyage à la vapeur

4.3 Entretien

• Retrait et nettoyage des grilles

• Retrait de la porte du four

• Retrait et nettoyage des vitres

• Remplacement de l'ampoule

Nettoyage du four et

maintenance

29

5.1 F.A.Q.

Dépannage

32

1. Instructions générales

Nous vous remercions d'avoir choisi un de nos produits.

Pour obtenir les meilleurs résultats avec votre four, vous

devez lire attentivement ce manuel et le conserver pour

toute consultation ultérieure. Avant d'installer le four,

notez le numéro de série, il vous sera demandé par le

support technique si des réparations sont nécessaires.

Après avoir enlevé le four de son emballage, vérifiez

qu'il n'a pas été endommagé pendant le transport. Si

vous avez des doutes, ne pas utiliser le four et se référer

à un technicien qualifié pour obtenir des conseils.

Conservez tous les matériaux d'emballage (sacs en

plastique, polystyrène, clous) hors de la portée des

enfants.Lors de la première utilisation du four, il peut se produire un dégagement de fumée âcre

provoqué par le premier échauffement de la colle des panneaux d’isolation enveloppant le four. Ce

phénomène est normal. Attendez que la fumée cesse avant de cuire des aliments. Le fabricant décline

toute responsabilité dans les cas où les instructions contenues dans le présent document ne sont pas

respectées.

REMARQUE: les fonctions du four, les propriétés et les accessoires cités dans ce manuel peuvent varier

selon les modèles.

1.1 Indications de sécurité

Utilisez uniquement le four à sa destination, qui est seulement pour la cuisson des aliments; toute autre

utilisation, par exemple comme une source de chaleur, est considérée comme impropre et donc

dangereuse. Le fabricant ne peut être tenu responsable de tout dommage lié à une mauvaise utilisation

ou a des modifications techniques du produit.

L'utilisation de tout appareil électrique implique le respect de certaines règles fondamentales:

- Ne pas tirer sur le fil électrique pour débrancher la prise.

- Ne pas toucher l'appareil avec les mains ou les pieds mouillés ou humides;

- En général l'utilisation d'adaptateurs, de prises multiples et de rallonges est déconseillé;

- En cas de dysfonctionnement et / ou de mauvais fonctionnement, éteindre l'appareil et ne pas y

toucher.

1.2 Sécurité électrique

LE BRANCHEMENT ELECTRIQUE DOIT ÊTRE REALISE PAR UN INSTALLATEUR AGREE OU UN

TECHNICIEN DE E.QUALIFICATION SIMILAIR

L'alimentation électrique à laquelle le four est connecté doit être conforme aux lois en vigueur dans le

pays d'installation. Le fabricant décline toute responsabilité pour tout dommage causé par le non

respect de ces instructions. Le four doit être raccordé à l'alimentation électrique avec une prise murale

reliée à la terre ou par l'intermédiaire d'un dispositif à coupure omnipolaire, selon les lois en vigueur

dans le pays d'installation. L'alimentation électrique doit être protégée par des fusibles appropriés et les

câbles utilisés doivent avoir une section transversale qui peut assurer une alimentation normale du four.

CONNEXION

Le four est livré avec un câble d’alimentation permettant le raccordement sous une tension électrique

de 230 V entre les phases ou entre phase et neutre. Le raccordement devra être effectué après avoir

vérifié:

- La tension d'alimentation indiquée sur le compteur;

- Le réglage du disjoncteur.

Le fil de protection du cordon (vert/jaune) relié à la Borne Terre de l’appareil doit être relié à la Borne

Terre de l’installation.

FR 20

La pagina si sta caricando...

Hoover HOZ7173WI WIFI Manuale utente

Questo manuale è adatto anche per

Hoover HOZ7173WI WIFI Manuale utente

Documenti correlati

Altri documenti