Eizo MX241W Manuale del proprietario

Important

Please read this User’s Manual and Setup Manual (separate volume)

carefully to familiarize yourself with safe and effective usage.

• Please refer to the Setup Manual for basic information ranging from

connection of the monitor to a PC to using the monitor.

• The latest User’s Manual is available for download from our web site:

http://www.eizo.com

Cover

Instructions for Use

■User’s Manual

2

SAFETY SYMBOLS

This manual uses the safety symbols below. They denote critical information. Please read them carefully.

WARNING

Failure to abide by the information in a WARNING may result in serious injury and can be life threatening.

CAUTION

Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product

damage.

Indicates a prohibited action.

Indicates to ground for safety.

This product has been adjusted specically for use in the region to which it was originally shipped. If

operated outside this region, the product may not perform as stated in the specications.

• It shall be assured that the nal system is in compliance to IEC60601-1-1 requirement.

• Power supplied equipment can emit electromagnetic waves, that could inuence, limit or result in

malfunction of the monitor.

Install the equipment in a controlled environment, where such effects are avoided.

• This is a monitor intended for use in a medical image system. It does not support the display of

mammography images for diagnosis.

No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by

any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.

EIZO Corporation is under no obligation to hold any submitted material or information condential unless

prior arrangements are made pursuant to EIZO Corporation’s receipt of said information. Although every

effort has been made to ensure that this manual provides up-to-date information, please note that EIZO

monitor specications are subject to change without notice.

Apple, Mac, Macintosh, iMac, eMac, Mac OS, MacBook, PowerBook, ColorSync, QuickTime, and iBook are registered trademarks of

Apple Inc.

Windows, Windows Vista, Windows Media, SQL Server, and Xbox 360 are registered trademarks of Microsoft Corporation in the

United States and other countries.

A round gothic bold bit map font designed by Ricoh is used for the characters displayed on this product.

VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other

countries.

EIZO, the EIZO Logo, ColorEdge, DuraVision, FlexScan, FORIS, RadiForce, RadiCS, RadiNET, Raptor, and ScreenManager are

registered trademarks of EIZO Corporation in Japan and other countries.

All other company and product names are trademarks or registered trademarks of their respective owners.

3

PRECAUTIONS

IMPORTANT!

• Thisproducthasbeenadjustedspecicallyforuseintheregiontowhichitwasoriginallyshipped.

Ifoperatedoutsidetheregiontowhichitwasoriginallyshipped,theproductmaynotperformasstated

inthespecications.

• Toensurepersonalsafetyandpropermaintenance,pleasereadthissectionandthecautionstatements

ontheunit(refertothegurebelow).

● Location of the Caution Statements

Ex. MX241W

● Symbols on the unit

Symbol This symbol indicates

Main Power Switch

Press to turn the monitor’s main power off

Main Power Switch

Press to turn the monitor’s main power on.

Power Button

Press to turn the monitor’s power on or off.

Alternating current

Alerting electrical hazard

Caution

Refer to SAFETY SYMBOLS section in this manual.

4PRECAUTIONS

WARNING

If the unit begins to emit smoke, smells like something is burning, or makes

strange noises, disconnect all power connections immediately and contact

your dealer for advice.

Attemptingtouseamalfunctioningunitmayresultinre,electricshock,orequipment

damage.

Do not open the cabinet or modify the unit.

Openingthecabinetormodifyingtheunitmayresultinre,electricshock,orburn.

Refer all servicing to qualied service personnel.

Donotattempttoservicethisproductyourselfasopeningorremovingcoversmayresultin

re,electricshock,orequipmentdamage.

Keep small objects or liquids away from the unit.

Smallobjectsaccidentallyfallingthroughtheventilationslotsintothecabinetorspillage

intothecabinetmayresultinre,electricshock,orequipmentdamage.Ifanobjectorliquid

falls/spillsintothecabinet,unplugtheunitimmediately.Havetheunitcheckedbyaqualied

serviceengineerbeforeusingitagain.

Place the unit at the strong and stable place.

Aunitplacedonaninadequatesurfacemayfallandresultininjuryorequipmentdamage.

Iftheunitfalls,disconnectthepowerimmediatelyandaskyourdealerforadvice.

Donotcontinueusingadamagedunit.Usingadamagedunitmayresultinreorelectric

shock.

Use the unit in an appropriate location.

Notdoingsomayresultinre,electricshock,orequipmentdamage.

• Donotplaceoutdoors.

• Donotplaceinthetransportationsystem(ship,aircraft,trains,automobiles,etc.)

• Donotplaceinadustyorhumidenvironment.

• Donotplaceinalocationwherewaterissplashedonthescreen(bathroom,kitchen,etc.).

• Donotplaceinalocationwherethesteamcomesdirectlyonthescreen.

• Donotplacenearheatgeneratingdevicesorahumidier.

• Donotplaceinalocationwheretheproductissubjecttodirectsunlight.

• Donotplaceinaninammablegasenvironment.

To avoid danger of suffocation, keep the plastic packing bags away from

babies and children.

Use the enclosed power cord and connect to the standard power outlet of your

country.

Besuretoremainwithintheratedvoltageofthepowercord.Notdoingsomayresultinre

orelectricshock.Powersupply:100-120/200-240Vac,50/60Hz

To disconnect the power cord, grasp the plug rmly and pull.

Tuggingonthecordmaydamageandresultinreorelectricshock. OK

5

PRECAUTIONS

WARNING

The equipment must be connected to a grounded main outlet.

Notdoingsomaycauseinreorelectricshock.

Use the correct voltage.

• Theunitisdesignedforusewithaspecicvoltageonly.Connectiontoanothervoltage

thanspeciedinthisUser’sManualmaycausere,electricshock,orequipmentdamage.

Powersupply:100-120/200-240Vac,50/60Hz

• Donotoverloadyourpowercircuit,asthismayresultinreorelectricshock.

Handle the power cord with care.

• Donotplacethecordunderneaththeunitorotherheavyobjects.

• Donotpullonortiethecord.Ifthepowercordbecomesdamaged,stopusingit.Useofa

damagedcordmayresultinreorelectricshock.

For the electrical safety, do not connect or disconnect the power cord in the

presence of patients.

Never touch the plug and power cord if it begins to thunder.

Touchingthemmayresultinelectricshock.

When attaching an arm stand, please refer to the user’s manual of the arm

stand and install the unit securely.

Notdoingsomaycausetheunittobecomeunattached,whichmayresultininjuryor

equipmentdamage.Beforeinstallation,makesurethatdesks,walls,andothersanarmstand

isxedonhaveadequatemechanicalstrength.

Whentheunitisdropped,pleaseaskyourdealerforadvice.

Donotcontinueusingadamagedunit.Usingadamagedunitmayresultinreorelectric

shock.Whenreattachingthetiltstand,pleaseusethesamescrewsandtightenthemsecurely.

Do not touch a damaged LCD panel directly with bare hands.

Theliquidcrystalwhichleaksfromthepanelispoisonousifitenterstheeyesormouth.

Ifanypartoftheskinorbodycomesindirectcontactwiththepanel,pleasewashthoroughly.

Ifsomephysicalsymptomsresult,pleaseconsultyourdoctor.

Fluorescent backlight lamps contain mercury (the products that have LED

backlight lamps contain no mercury), dispose according to local, state or

federal laws.

Exposuretoelementalmercurycanresultineffectsonthenervoussystem,includingtremor,

memoryloss,andheadache.

6PRECAUTIONS

CAUTION

Handle with care when carrying the unit.

Disconnectthepowercordandcableswhenmovingtheunit.Movingtheunitwiththecord

attachedisdangerous.Itmayresultininjury.

When handling the unit, grip the bottom of the unit rmly with both hands

ensuring the panel faces outward before lifting.

Droppingtheunitmayresultininjuryorequipmentdamage.

Do not block the ventilation slots on the cabinet.

• Donotplaceanyobjectsontheventilationslots.

• Donotinstalltheunitinaclosedspace.

• Donotusetheunitlaiddownorupsidedown.

Blockingtheventilationslotspreventsproperairowandmayresultinre,electricshock,

orequipmentdamage.

Do not touch the plug with wet hands.

Doingsomayresultinelectricalshock.

Use an easily accessible power outlet.

Thiswillensurethatyoucandisconnectthepowerquicklyincaseofaproblem.

Periodically clean the area around the plug.

Dust,water,oroilontheplugmayresultinre.

Unplug the unit before cleaning it.

Cleaningtheunitwhileitispluggedintoapoweroutletmayresultinelectricshock.

If you plan to leave the unit unused for an extended period, disconnect the

power cord from the wall socket after turning off the power switch for the

safety and the power conservation.

This product is only suitable for a patient environment, but not for contact

with a patient.

7

PRECAUTIONS

Notice for this monitor

This product is intended to be used in displaying and viewing digital images for diagnosis of X-ray or MRI, etc. by

trained medical practitioners. It does not support the display of mammography images for diagnosis.

This product has been adjusted specically for use in the region to which it was originally shipped. If the product is

used outside the region, it may not operate as specied in the specications.

This product may not be covered by warranty for uses other than those described in this manual.

The specications noted in this manual are only applicable when the following are used:

· Power cords provided with the product

· Signal cables specied by us

Only use optional products manufactured or specied by us with this product.

As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more

after the monitor power has been turned on.

Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a

stable display.

When the screen image is changed after displaying the same image for extended periods of time, an afterimage may

appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.

Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. (Refer to

“Cleaning” on the next page.)

The screen may have defective pixels or a small number of light dots on the screen. This is due to the characteristics of

the panel itself, and is not a malfunction of the product.

The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact

your dealer.

Do not press on the panel or edge of the frame strongly, as this may result in display malfunctions, such as interference

patterns, etc. If pressure is continually applied to the panel, it may deteriorate or damage your panel. (If the pressure

marks remain on the panel, leave the monitor with a black or white screen. The symptom may disappear.)

Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt

to brush with tissues as this may scratch the panel.

When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may

occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until

the dew condensation disappears, otherwise it may cause some damage to the monitor.

8PRECAUTIONS

Cleaning

Attention

• Chemicalssuchasalcoholandantisepticsolutionmaycauseglossvariation,tarnishing,andfadingofthecabinetorpanel,

andalsoqualitydeteriorationoftheimage.

• Neveruseanythinner,benzene,wax,andabrasivecleaner,whichmaydamagethecabinetorpanel.

Note

• TheoptionalScreenCleanerisrecommendedforcleaningthecabinetandpanelsurface.

Ifnecessary,thestainsonthecabinetandpanelsurfacecanberemovedbymoisteningpartofasoftclothwith

water.

To use the monitor comfortably

• Anexcessivelydarkorbrightscreenmayaffectyoureyes.Adjustthebrightnessofthemonitor

accordingtotheenvironmentalconditions.

• Staringatthemonitorforalongtimetiresyoureyes.Takea10-minuteresteveryhour.

9

CONTENTS

Cover ............................................................. 1

PRECAUTIONS ..................................................... 3

Notice for this monitor ............................................. 7

CONTENTS ............................................................. 9

Chapter 1 Introduction ..................................... 10

1-1. Features ...........................................................10

1-2. Controls and Functions .................................11

1-3. Utility Disk .......................................................11

● Disk contents and software overview ...............11

●

To RadiCS LE or ScreenManager Pro for Medical .11

1- 4. Basic Operation and Functions ....................12

Basic operation of Adjustment menu................12

Functions ..............................................................13

Chapter 2 Adjusting Screen ............................. 14

2-1. Setting Screen Resolution ...............................14

Compatible Resolutions/Frequencies ...............14

Setting Resolution ...............................................14

● Windows 8 / Windows 7 ....................................14

● Windows Vista ..................................................14

● Windows XP ......................................................14

● Mac OS X ..........................................................14

2-2. Displaying Screen Correctly .........................15

Digital Input ..........................................................15

Analog Input .........................................................15

2-3. Color Adjustment ...........................................19

● To select the display mode (CAL Switch) .........19

● To perform advanced adjustments ...................19

● Adjustment items in each mode ....................... 20

● To adjust the brightness [Brightness] ...............21

● To adjust the contrast [Contrast] .......................21

● To adjust the color temperature [Temperature] 21

● To adjust the gamma value [Gamma] .............. 22

● To adjust the hue [Hue] .................................... 22

● To adjust the color saturation [Saturation] ....... 22

● To enhance the outline of the image [Outline

Enhancer] ......................................................... 23

● To adjust the gain value [Gain] ......................... 23

● To adjust six colors [6 Colors] .......................... 23

2-4. Displaying Lower Resolutions..................... 24

● To change screen size [Screen Size]................24

Chapter 3 Setting Monitor ................................ 25

3-1. Enabling/Disabling Mode Selection

[Mode Preset] ................................................ 25

3-2. Locking Buttons [Key Lock] ........................ 25

3-3. Setting the EIZO Logo Display [Logo] ........ 26

3-4. Setting Orientation [Orientation] ................ 26

● To set the orientation of the Adjustment menu 26

3-5. Setting Language [Language] ..................... 27

3-6. Setting the Display Position of the

Adjustment Menu [Menu Position] .............. 27

3-7. Restoring the Default Setting ...................... 27

● To reset color adjustment values [Color Reset] 27

● To reset all adjustments to the factory default

settings [All Reset] ........................................... 27

Chapter 4 Power Saving Function ................... 28

4-1. Setting the Power Saving [Power Save] ..... 28

4-2. Setting Power Indicator [Power Indicator] . 28

4-3. Setting Monitor’s Automatic Brightness

Adjustment [Auto EcoView] ......................... 29

Chapter 5 Troubleshooting .............................. 30

Chapter 6 Reference ......................................... 33

6-1. Attaching an Arm .......................................... 33

6-2. Connecting More than Two PCs to the

Monitor ........................................................... 34

● To switch the input signal ................................. 34

● To set input signal selection [Input Selection] .. 35

6-3. Making Use of USB (Universal Serial Bus) . 36

● Required System Environment ........................ 36

●

Connection Procedure (Setup of USB Function) 36

6-4. Displaying Monitor Information ...................37

● Displaying monitor information by pressing .37

● Displaying signal information [Signal Info] ........37

● Displaying monitor information [Monitor Info] ...37

6-5. Specications ................................................ 38

6-6. Glossary ......................................................... 46

6-7. Preset Timing ................................................. 48

FCC Declaration of Conformity ......................... 49

EMC Information ................................................. 50

LIMITED WARRANTY .......................................... 53

10 Chapter 1 Introduction

Chapter 1 Introduction

ThankyouverymuchforchoosinganEIZOColorMonitor.

1-1. Features

• 24”wideformatLCD(MX241W)

• 22”wideformatLCD(MX220W)

• Applicabletotheresolution1920dotsx1200lines

• ApplicabletoDisplayPort(applicableto8bitor10bit,notapplicabletoaudiosignals)

• 3signalinputterminals(DVI-Ix2,DisplayPortx1)

• CALSwitchfunctionforselectinganoptimalcalibrationmode

“2-3.Toselectthedisplaymode(CALSwitch)”(page19)

• DICOMmode(CALSwitchfunction)(page46)

• Thequalitycontrolsoftware“RadiCSLE”(forWindows)usedtocalibratethemonitorisincluded

“1-3.UtilityDisk”(page11)

• Thesoftware“ScreenManagerProforMedical”(forWindows)toadjustthescreenusingthemouse

andkeyboardisincluded

“1-3.UtilityDisk”(page11)

• FrameSynchronousmodesupported(59-61Hz)

• Powersavingfunction

Thisproductisequippedwithpowersavingfunction.

-PowerConsumptionwhenmainpowerswitchisOff:0W

Equippedwithmainpowerswitch.

Turningoffthemainpowerswitchcompletelyshutsoffpowersupplytothemonitorwhilethemonitorisnot

used.

-AutoEcoViewfunction

Thesensoronthefrontsideofthemonitordetectstheenvironmentalbrightnesstoadjustthescreenbrightness

automaticallyandcomfortably.

Excessivelyhighbrightnessmayleadadamagetothenaturalenvironmentaswellastoyoureyes.Suppressing

theexcessivelyhighbrightnesswillbehelpfultoreducethepowerconsumptionandthedamagetoyoureyes.

“4-3.SettingMonitor’sAutomaticBrightnessAdjustment[AutoEcoView]”(page29)

• HDCP(High-bandwidthDigitalContentProtection)

• Portrait/Landscapedisplayavailable(rotate90degreesclockwise)

NOTE

• ThismonitorsupportsthePortrait/Landscapedisplay.Thisfunctionallowsyoutochangetheorientationofthe

Adjustmentmenuwhenusingthemonitorscreeninverticaldisplayposition.(Referto“Tosettheorientationof

theAdjustmentmenu[Orientation]”onpage26.)

• Forusingthemonitorwith“Portrait”position,thegraphicsboardsupportingportraitdisplayisrequired.When

usingthemonitorwith“Portrait”position,thesettingneedstobechangeddependingonthegraphicsboardused

inyourPC.Refertothemanualofthegraphicsboardfordetails.

11

Chapter 1 Introduction

1-2. Controls and Functions

Ex. MX241W

124567810

39

Operation buttons

Adjustment menu

1. Sensor(AutoEcoView) 6. button

2. button 7. button

3. button 8. button

4. button 9. button

5. button 10. PowerIndicator

Indicator status Operation status

Blue The screen is displayed

Orange Power saving

Off Main Power Switch / Power button off

1-3. Utility Disk

An“EIZOLCDUtilityDisk”(CD-ROM)issuppliedwiththemonitor.Thefollowingtableshowsthe

diskcontentsandtheoverviewofthesoftwareprograms.

● Disk contents and software overview

Thediskincludesapplicationsoftwareprogramsforadjustment,andUser’sManual.Referto“Readme.

txt”leonthediskforsoftwarestartupproceduresorleaccessprocedures.

Item Overview

A “Readme.txt” le

RadiCS LE (for Windows) RadiCS LE is quality control software used to calibrate the

monitor and manage the calibration history. (A PC must be

connected to the monitor with the supplied USB cable.) Refer

to the description later.

ScreenManager Pro for Medical

(for Windows)

A utility software program to control monitor adjustments from

a PC using its mouse and keyboard. (A PC must be connected

to the monitor with the supplied USB cable.) Refer to the

description later.

User’s Manual (PDF le)

● To RadiCS LE or ScreenManager Pro for Medical

RefertothecorrespondingUser’sManualontheCD-ROMdiskinordertoinstallandusethesoftware.

Whenusingthissoftware,youwillneedtoconnectaPCtothemonitorwiththesuppliedUSBcable.For

moreinformationrefertothe“6-3.MakingUseofUSB(UniversalSerialBus)”(page36).

12 Chapter 1 Introduction

1- 4. Basic Operation and Functions

Basic operation of Adjustment menu

1 Displaying Adjustment Menu

Press .

Theadjustmentmenuappears.

Current mode

Menu title

Settings

Menu

Item

2 Adjusting/Setting

1. Chooseamenutoadjust/setwith ,andpress .

2. Chooseanitemtoadjust/setwith ,andpress .

3. Adjust/settheselecteditemwith ,andpress .

3 Exiting

Press afewtimes.

Theadjustmentmenunishes.

13

Chapter 1 Introduction

Functions

ThefollowingtableshowsalltheAdjustmentmenu’sadjustmentandsettingmenus.

Main Menu Item Adjusting/Setting

Color Brightness “2-3. Color Adjustment” (page 19)

Contrast

Temperature

Gamma

Advanced

Settings

Hue

Saturation

Outline Enhancer

Gain

6 Colors

Color Reset “3-7. Restoring the Default Setting”

(page 27)

Screen Screen Size “2-4. Displaying Lower Resolutions”

(page 24)

Analog

Adjustment

Auto Adjustment “2-2. Displaying Screen Correctly”

(page 15)

Range Adjustment

Clock

Phase

Hor.Position

Ver.Position

PowerManager Power Save “4-1. Setting the Power Saving” (page 28)

Auto EcoView “4-3. Setting Monitor’s Automatic Brightness

Adjustment” (page 29)

Power Indicator “4-2. Setting Power Indicator” (page 28)

Menu Settings Language “3-5. Setting Language” (page 27)

Orientation “3-4. Setting Orientation” (page 26)

Menu Position “3-6. Setting the Display Position of the

Adjustment Menu” (page 27)

Tools Input Selection “6-2. Connecting More than Two PCs to the

Monitor” (page 34)

Mode Preset “3-1. Enabling/Disabling Mode Selection”

(page 25)

Signal Info “6-4. Displaying Monitor Information”

(page 37)

Monitor Info

All Reset “3-7. Restoring the Default Setting”

(page 27)

* Theadjusting/settingfunctiononthe<Color>menudependontheselectedColormode(page20).Theabovetable

showsthesubmenuswhenthe“Custom”modeisselected(See“2-3.ColorAdjustment”(page19)).

14 Chapter 2 Adjusting Screen

Chapter 2 Adjusting Screen

2-1. Setting Screen Resolution

Compatible Resolutions/Frequencies

Fordetailsoncompatibleresolutions,referto“CompatibleResolutions/Frequencies”intheSetup

Manual.

Setting Resolution

WhenyouconnectthemonitortothePCandndthattheresolutionisimproper,orwhenyouwantto

changetheresolution,followtheprocedurebelow.

● Windows 8 / Windows 7

1. ForWindows8,clickthe“Desktop”tileontheStartScreentodisplaythedesktop.

2. Right-clickthemouseanywhereonthedesktopexceptforicons.

3. Fromthedisplayedmenu,click“Screenresolution”.

4. Onthe“ScreenResolution”dialog,selectthemonitor.

5. Click“Resolution”toselectthedesiredresolution.

6. Clickthe[OK]button.

7. Whenaconrmationdialogisdisplayed,click[Keepchanges].

● Windows Vista

1. Right-clickthemouseanywhereonthedesktopexceptforicons.

2. Fromthedisplayedmenu,click“Personalize”.

3. Onthe“Personalization”window,click“DisplaySettings”.

4. Onthe“DisplaySettings”dialog,selectthe“Monitor”tabandselectdesiredresolutioninthe

“Resolution”eld.

5. Clickthe[OK]button.

6. Whenaconrmationdialogisdisplayed,click[Yes].

● Windows XP

1. Right-clickthemouseanywhereonthedesktopexceptforicons.

2. Fromthedisplayedmenu,click“Properties”.

3. Whenthe“DisplayProperties”dialogisdisplayed,clickthe“Settings”tabandselectdesired

resolutionfor“Screenresolution”under“Display”.

4. Clickthe[OK]buttontoclosethedialog.

● Mac OS X

1. Select“SystemPreferences”fromtheApplemenu.

2. Whenthe“SystemPreferences”dialogisdisplayed,click“Displays”for“Hardware”.

3. Onthedisplayeddialog,selectthe“Display”tabandselectdesiredresolutioninthe“Resolutions”

eld.

4. Yourselectionwillbereectedimmediately.Whenyouaresatisedwiththeselectedresolution,close

thewindow.

15

Chapter 2 Adjusting Screen

2-2. Displaying Screen Correctly

Digital Input

Whendigitalsignalsareinput,imagesaredisplayedcorrectlybasedonthepresetdataofthemonitor.

Whenperformingadvancedadjustment,see“2-3ColorAdjustment”(page19)andsubsequentpages.

Analog Input

Attention

• Wait30minutesormorefrommonitorpoweronbeforestartingadjustments.

(Allowthemonitortowarmupforatleast30minutesbeforemakingadjustments.)

Themonitorscreenadjustmentisusedtosuppressickeringofthescreenoradjustscreenpositionand

screensizecorrectlyaccordingtothePCtobeused.

TheSelfAdjustfunctionworkswhenallofthefollowingconditionsaresatised.

•WhenasignalisinputintothemonitorforthersttimeorwhentheresolutionorVertical/

HorizontalFrequencynotdisplayedbeforeisset

•Whensignalswiththeverticalresolutionover480areinput

IfthescreenisnotdisplayedcorrectlyevenafterperformingtheSelfAdjustoperation,adjustthescreen

accordingtotheproceduresonthefollowingpagestousethemonitorcomfortably.

[Adjustment Procedure]

1 Perform the auto adjustment.

● To adjust ickering, screen position, and screen size automatically [Auto Adjustment]

Procedure

1. Choose<Screen>fromtheAdjustmentmenu,andpress .

2. Choose<AnalogAdjustment>fromthe<Screen>menu,andpress .

3. Choose<AutoAdjustment>,andpress .

Theautoadjustmentfunctionworks(themessage“InProgress”appears)tocorrectlyadjusttheickering,screen

position,andscreensizecorrectly.

Whentheautoadjustmentiscompleted,amessageappears.Select“OK”toconrmthenewsettingsor“Cancel”

torestoretheprevioussettings,andpress .

Attention

• ThisfunctionworkscorrectlywhenanimageisfullydisplayedovertheWindowsorMacintoshdisplayarea.It

doesnotworkproperlywhenanimageisdisplayedonlyonapartofthescreen(commandpromptwindow,for

example)orwhenablackbackground(wallpaper,etc.)isinuse.

• Thisfunctiondoesnotworkcorrectlywithsomegraphicsboards.

Ifthescreenisnotdisplayedcorrectlyevenafteradjustinginstep1above,performtheadjustments

accordingtotheproceduresonthefollowingpages.Whenthescreenisdisplayedcorrectly,gotostep

5“Toadjustcolorgradationautomatically[RangeAdjustment]”.

16 Chapter 2 Adjusting Screen

2 Prepare the display pattern for the analog display adjustment.

Downloadthe“Screenadjustmentpatternles”fromoursite:http://www.eizo.com

NOTE

• Fordetailsandinstructionsonopeningthe“Screenadjustmentpatternles”,refertothe“Readme.txt”le.

3 Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

● To adjust ickering, screen position, and screen size automatically [Auto Adjustment]

Procedure

1. DisplayPattern1ofthescreenadjustmentpatternlesinfullscreenonthemonitor.

2. Choose<Screen>fromtheAdjustmentmenu,andpress .

3. Choose<AnalogAdjustment>fromthe<Screen>menu,andpress .

Toproceedwiththesubsequentadjustments,selectanitemin<AnalogAdjustment>ofthe<Screen>menu.

4. Choose<AutoAdjustment>,andpress .

Theautoadjustmentfunctionworks(themessage“InProgress”appears)toadjusttheickering,screenposition,

andscreensizecorrectly.

Whentheautoadjustmentiscompleted,amessageappears.Select“OK”toconrmthenewsettingsor“Cancel”

torestoretheprevioussettings,andpress .

Ifthescreenisnotdisplayedcorrectlyevenafteradjustinginstep3above,performtheadjustments

accordingtotheproceduresonthefollowingpages.Whenthescreenisdisplayedcorrectly,gotostep

5“Toadjustcolorgradationautomatically[RangeAdjustment]”.

17

Chapter 2 Adjusting Screen

4 Perform advanced adjustments for the following using the <Screen> menu of

the <Analog Adjustment>.

Adjusttheclock,phaseandposition,inthisorder.

● To eliminate vertical bars [Clock]

Procedure

1. Choose<Clock>fromthe<AnalogAdjustment>menu,andpress .

2. Adjusttheclockwith or .

Press slowlysoasnottomisstheadjustmentpoint.

3. Press toexittheadjustment.

Whenblurring,ickeringorbarsappearonthescreenafteradjustment,proceedto[Phase]toremoveickering

orblurring.

● Remove ickering or blurring [Phase]

Procedure

1. Choose<Phase>fromthe<AnalogAdjustment>menu,andpress .

2. Adjustthephasewith or .

3. Press toexittheadjustment.

Attention

• FlickeringorblurringmaynotbeeliminateddependingonyourPCorgraphicsboard.

● To correct screen position [Hor.Position] [Ver.Position]

NOTE

• SincethenumberofpixelsandthepixelpositionsarexedontheLCDmonitor,onlyonepositionisprovidedto

displayimagescorrectly.Thepositionadjustmentismadetoshiftanimagetothecorrectposition.

Procedure

1. Choose<Hor.Position>or<Ver.Position>fromthe<AnalogAdjustment>menu,andpress .

2. Adjustthepositionwith or .

3. Press toexittheadjustment.

18 Chapter 2 Adjusting Screen

5 Adjust the color gradation.

● To adjust color gradation automatically [Range Adjustment]

Everycolorgradation(0to255)canbedisplayedbyadjustingthesignaloutputlevel.

Procedure

1. DisplayPattern2infullscreenonthemonitorusingthescreenadjustmentpatternles.

2. Choose<RangeAdjustment>fromthe<AnalogAdjustment>menu,andpress .

Thecolorgradationisadjustedautomatically.

Whentheautoadjustmentiscompleted,amessageappears.Select“OK”toconrmthenewsettingsor“Cancel”

torestoretheprecioussettings,andpress .

3. ClosethePattern2.

19

Chapter 2 Adjusting Screen

2-3. Color Adjustment

● To select the display mode (CAL Switch)

CALSwitchallowsyoutoselecteasilytheadequatemodesuitableforthemonitor’sapplication.

CAL Switch mode

Mode Purpose

1-DICOM Available to display in DICOM mode.

2-Custom Available for the color settings according to your preference.

3-CAL Displays the screen adjusted by calibration software.

4-Text Suitable for displaying texts for word processing or spreadsheets.

The mode menu

appears.

Procedure

1. Press .

Modemenuappearsatthelowerleftofthescreen.

2. Themodeamongthelistishighlightedinturneachtime ispressed.

Youcanswitchthecurrentmodewith or whilethemodemenuisbeingdisplayed.

→1-DICOM←→2-Custom←→3-CAL←→4-Text←

NOTE

• TheAdjustmentmenuandtheModemenucannotbedisplayedatthesametime.

• Youcandisableaspecicmodetobeselected.Formoreinformation,referto“3-1Enabling/DisablingMode

Selection”(page25).

● To perform advanced adjustments

The<Color>menuoftheAdjustmentmenuallowsyoutosetandsavetheindependentcoloradjustment

foreachmode.

Attention

• Wait30minutesormorefrommonitorpoweronbeforestartingthecoloradjustment.

(Allowthemonitortowarmupforatleast30minutesbeforemakingadjustments.)

• Performtherangeadjustmentrstwhenadjustingcolorforanaloginputsignals.

(Referto“Toadjustcolorgradationautomatically”onpage18).

• Thesameimagemaybeseenindifferentcolorsonmultiplemonitorsduetotheirmonitor-speciccharacteristics.

Makenecoloradjustmentvisuallywhenmatchingcolorsonmultiplemonitors.

NOTE

• Thevaluesshownin“%”or“K”areavailableonlyasreference.

20 Chapter 2 Adjusting Screen

● Adjustment items in each mode

Accordingtothemodeselected,theadjustablefunctiondiffers.

(Youcannotselectanyfunctionunavailableforadjustmentorsetting.)

Theadjustmentsorsettingsmadeforeachmodeareappliedtoallinputsignals.

Fortheadjustmentmethodofeachfunction,refertosubsequentpages.

√:Adjustmentavailable―:Invalidforadjustment

Icon Function CAL Switch mode

1-DICOM 2-Custom* 3-CAL* 4-Text*

Brightness √ √ √ √

Contrast ― √ ― √

Temperature ― √ ― √

Gamma ― √ ― √

Hue ― √ ― √

Saturation ― √ ― √

Outline

Enhancer ― √ ― √

Gain ― √ ― ―

6 Colors ― √ ― ―

Color Reset √ √ √ √

* Ifyouadjustthecalibrationinthismodeusingthecalibrationkitexclusivefortothismonitor(RadiCSLEasan

accessoryshownonpage45),onlyBrightnessandResetisadjustable.

La pagina si sta caricando...

Eizo MX241W Manuale del proprietario

Questo manuale è adatto anche per

Eizo MX241W Manuale del proprietario

in altre lingue

Documenti correlati