Yamaha DVD-S559 Manuale del proprietario

Marca: Yamaha

Modello: DVD-S559

Categoria: Lettori DVD

Tipo: Manuale del proprietario

DVD-S559

DVD PLAYER

LECTEUR DE DVD

OWNER'S MANUAL

MODE D'EMPLOI

01_DVD-S559_En.book Page 0 Friday, November 18, 2005 4:32 PM

To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

Install this sound system in a well ventilated, cool,

dry, clean place — away from direct sunlight, heat

sources, vibration, dust, moisture, or cold. In a

cabinet, allow about 2.5 cm (1 inch) of free space

all around this unit for adequate ventilation.

Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds.

Do not expose this unit to sudden temperature

changes from cold to hot, nor locate this unit in

an environment with high humidity (i.e., a room

with a humidifier) to prevent condensation inside

this unit, which may cause an electrical shock, fire,

damage to this unit, and/or personal injury.

Avoid installing this unit in a location where

foreign objects may fall onto this unit or where

this unit may be exposed to liquid dripping or

splashing. On the top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e., candles), as they may

cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may fall,

spilling the liquid and causing an electrical

shock to the user and/or damage to this unit.

Do not cover this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

Do not plug in this unit to a wall outlet until all

connections are complete.

Do not operate this unit upside-down. It may

overheat, possibly causing damage.

Do not use excessive force on switches, knobs

and/or cords.

When disconnecting the power cord from the

wall outlet, grasp the plug; do not pull the cord.

Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

Use only the voltage specified on this unit. Using

this unit with a higher voltage than specified is

dangerous and may cause fire, damage to this

unit, and/or personal injury. YAMAHA will not be

held responsible for any damage resulting from

use of this unit with a voltage other than as

specified.

To prevent damage by lightning, keep the power

cord out and outdoor antennas disconnected

from a wall outlet or the unit during a lightning

storm.

Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reason.

When not planning to use this unit for long

periods of time (i.e., vacation), disconnect the AC

power plug from the wall outlet.

Be sure to read the “Troubleshooting” section on

common operating errors before concluding that

this unit is faulty.

Before moving this unit, press STANDBY/ON to

set the unit in standby mode, then disconnect the

AC power plug from the wall outlet.

Install this unit near the AC outlet and where the

AC power plug can be reached easily.

LASER SAFETY

This unit employs a laser. Due to possible eye injury,

only a qualified service person should remove the

cover or attempt to service this device.

DANGER

This unit emits visible laser radiation when open.

Avoid direct eye exposure to beam.

When this unit is plugged into a wall outlet, do not

place your eyes close to the opening of the disc tray

and other openings or look inside.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO

RAIN OR MOISTURE.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

01_DVD-S559_En.book Page 1 Friday, November 18, 2005 4:32 PM

Contents

English

Thank you for purchasing this YAMAHA product.

Please read through this owner’s manual so that you will know how to operate your model

properly. After you have finished reading the instructions, put them in a safe place for future

reference

Contents

01 Before you start

Features

. . . . . . . . . . . . . . . . . . . . . . . . . . . 4

What’s in the box

. . . . . . . . . . . . . . . . . . . . 4

Hints on installation

. . . . . . . . . . . . . . . . . . 5

Disc/content format playback compatibility

02 Connecting up

Easy connections

. . . . . . . . . . . . . . . . . . . . 8

Connecting using a SCART AV cable

. . . . . 9

Connecting using the S-video output

. . . . . 9

Connecting using the component video

output

. . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting to an AV receiver

. . . . . . . . . . 11

03 Controls and displays

Front panel

. . . . . . . . . . . . . . . . . . . . . . . . 12

Remote control

. . . . . . . . . . . . . . . . . . . . 13

04 Getting started

Switching on

. . . . . . . . . . . . . . . . . . . . . . 14

Using the on-screen displays

. . . . . . . . . . 14

Setting up the player for your TV

. . . . . . . . 15

Setting the language of this player’s

on-screen displays

. . . . . . . . . . . . . . . . . . 15

Playing discs

. . . . . . . . . . . . . . . . . . . . . . 16

05 Playing discs

Scanning discs

. . . . . . . . . . . . . . . . . . . . .20

Playing in slow motion

. . . . . . . . . . . . . . . .20

Frame advance/frame reverse

. . . . . . . . . .21

Viewing a JPEG slideshow

. . . . . . . . . . . . .21

Browsing DVD or Video CD/Super VCD disc

with the Disc Navigator

. . . . . . . . . . . . . . .21

Browsing WMA, MP3, DivX video and

JPEG files with the Disc Navigator

. . . . . . .22

Looping a section of a disc

. . . . . . . . . . . .23

Using repeat play

. . . . . . . . . . . . . . . . . . . .23

Using random play

. . . . . . . . . . . . . . . . . .24

Creating a program list

. . . . . . . . . . . . . . .25

Searching a disc

. . . . . . . . . . . . . . . . . . . .26

Switching subtitles

. . . . . . . . . . . . . . . . . .26

Switching audio language/channels

. . . . .27

Zooming the screen

. . . . . . . . . . . . . . . . . .27

Switching camera angles

. . . . . . . . . . . . .27

Displaying disc information

. . . . . . . . . . . .27

06 Audio Settings and Video Adjust

menus

Audio Settings menu

. . . . . . . . . . . . . . . . .28

Video Adjust menu

. . . . . . . . . . . . . . . . . .29

01_DVD-S559_En.book Page 2 Friday, November 18, 2005 4:32 PM

Contents01

07 Initial Settings menu

Using the Initial Settings menu

. . . . . . . . .30

Digital Audio Out settings

. . . . . . . . . . . . .30

Video Output settings

. . . . . . . . . . . . . . . .31

Language settings

. . . . . . . . . . . . . . . . . . .31

Display settings

. . . . . . . . . . . . . . . . . . . . .32

Options settings

. . . . . . . . . . . . . . . . . . . .32

Parental Lock

. . . . . . . . . . . . . . . . . . . . . . .33

08 Additional information

Taking care of your player and discs

. . . . .35

Screen sizes and disc formats

. . . . . . . . . .36

Setting the TV system

. . . . . . . . . . . . . . . .37

Resetting the player

. . . . . . . . . . . . . . . . . .37

DVD-Video regions

. . . . . . . . . . . . . . . . . . .37

Selecting languages using the language

code list

. . . . . . . . . . . . . . . . . . . . . . . . . . .37

Language code list

. . . . . . . . . . . . . . . . . . .38

Country/Area code list

. . . . . . . . . . . . . . . .38

Glossary

. . . . . . . . . . . . . . . . . . . . . . . . . . .39

Specifications

. . . . . . . . . . . . . . . . . . . . . .40

01_DVD-S559_En.book Page 3 Friday, November 18, 2005 4:32 PM

Before you start

English

Chapter 1

Before you start

Features

• 24-bit/192kHz compatible DAC

The on-board 24-bit/192kHz DAC means that

this player is fully compatible with high

sampling-rate discs, capable of delivering

exceptional sound quality in terms of dynamic

range, low-level resolution and high-frequency

detail.

• Excellent audio performance surround

sound entertainment with Dolby Digital

and DTS

software

Logos:

When connected to a suitable AV amplifier or

receiver, this player gives great surround

sound with Dolby Digital and DTS discs.

• PureCinema Progressive Scan video

When connected to a progressive scan-

compatible TV or monitor using the

component video outputs, you can enjoy

extremely stable, flicker free images, with the

same frame refresh rate as the original movie.

• New Disc Navigator with moving

pictures

The new Disc Navigator enables you play the

first few seconds of each title or chapter in a

thumbnail image on screen.

• DSP effects for enhanced playback

See Audio Settings and Video Adjust menus on

page 28.

• Picture zoom

See Zooming the screen on page 27.

• MP3 and WMA compatibility

See Compressed audio compatibility on page 6.

• JPEG compatibility

See JPEG file compatibility on page 7.

• DivX video compatibility

See DivX video compatibility on page 7.

• Energy saving design

An auto power-off function switches the player

into standby if not used for about 30 minutes.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are registered

trademarks of Digital Theater Systems Inc.

What’s in the box

Please confirm that the following accessories

are in the box when you open it.

• Remote control

• AA/R6 dry cell batteries x2

• Audio/video cable (red/white/yellow plugs)

• Power cable

• Owner’s Manual

Putting the batteries in the remote

• Open the battery compartment cover

and insert the batteries as shown.

Use two AA/R6 batteries and follow the

indications (, ) inside the compartment.

Close the cover when you’re finished.

01_DVD-S559_En.book Page 4 Friday, November 18, 2005 4:32 PM

Before you start01

Important

Incorrect use of batteries can result in hazards

such as leakage and bursting. Please observe

the following:

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,

different batteries may have different

voltages.

• Make sure that the plus and minus ends of

each battery match the indications in the

battery compartment.

• Remove batteries from equipment that

isn’t going to be used for a month or more.

• When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules

that apply in your country or area.

Hints on installation

We want you to enjoy using this product for

years to come, so please use the following

guidelines when choosing a suitable location:

Do...

• Use in a well-ventilated room.

• Place on a solid, flat, level surface, such as

a table, shelf or stereo rack.

Don’t...

• Use in a place exposed to high

temperatures or humidity, including near

radiators and other heat-generating

appliances.

• Place on a window sill or a place where the

player will be exposed to direct sunlight.

• Use in an excessively dusty or damp

environment.

• Place directly on top of an amplifier, or

other component in your stereo system

that becomes hot in use.

• Use near a television or monitor as you may

experience interference—especially if the

television uses an indoor antenna.

• Use in a kitchen or other room where the

player may be exposed to smoke or steam.

• Use on a thick rug or carpet, or cover with

cloth—this may prevent proper cooling of

the unit.

• Place on an unstable surface, or one that is

not large enough to support all four of the

unit’s feet.

Disc/content format playback

compatibility

This player is compatible with a wide range of

disc types (media) and formats. Playable discs

will generally feature one of the following logos

on the disc and/or disc packaging. Note

however that some disc types, such as

recordable CD and DVD, may be in an

unplayable format—see below for further

compatibility information.

Please also note that recordable discs cannot be

recorded using this player.

• is a trademark of Fuji Photo Film Co. Ltd.

• Also compatible with KODAK Picture CD

DVD-Video DVD-R DVD-RW

DVD+Rewritable DVD+R DVD+RDL

Video CD

Fujicolor CD

Audio CD CD-R CD-RW

DVD+R DL

DVD+R

DVD+ReWritable

01_DVD-S559_En.book Page 5 Friday, November 18, 2005 4:32 PM

Before you start

English

This player supports the IEC’s Super VCD stan-

dard. Compared to the Video CD standard,

Super VCD offers superior picture quality, and

allows two stereo soundtracks to be recorded.

Super VCD also supports the widescreen size.

CD-R/RW compatibility

• Compatible formats: CD-Audio, Video CD/

Super VCD, ISO 9660 CD-ROM* containing

MP3, WMA, JPEG or DivX video files

* ISO 9660 Level 1 or 2 compliant. CD

physical format: Mode1, Mode2 XA Form1.

Romeo and Joliet file systems are both

compatible with this player.

• Multi-session playback: No

• Unfinalized disc playback: No

• File structure (may differ): Up to 299 folders

on a disc; up to 648 folders and files

(combined) within each folder

DVD+R/RW, DVD-R/RWcompatibility

• Compatible formats: DVD-Video, Video

Recording (VR)*

* DVD-RW only. Edit points may not play

exactly as edited; screen may go

momentarily blank at edited points.

• Unfinalized playback: No

• WMA/MP3/JPEG file playback on DVD+R/

RW, DVD-R/RW: No

Compressed audio compatibility

• Compatible formats: MPEG-1 Audio Layer 3

(MP3), Windows Media Audio (WMA)

• Sampling rates: 32, 44.1 or 48kHz

• Bit-rates: Any (128Kbps or higher

recommended)

• VBR (variable bit rate) MP3 playback: No

• VBR WMA playback: No

• WMA lossless encoding compatible: No

• DRM (Digital Rights Management)

compatible: Yes (DRM-protected audio

files will not play in this player—see also

DRM in the Glossary on page 39)

• File extensions: .mp3, .wma (these must be

used for the player to recognize MP3 and

WMA files – do not use for other file types)

About WMA

The Windows Media

logo indicates that this

player can playback Windows Media Audio

content.

WMA is an acronym for Windows Media Audio

and refers to an audio compression technology

developed by Microsoft Corporation. WMA

content can be encoded by using Windows

Media

Player version 7, 7.1, Windows Media

Player for Windows

XP, or Windows Media

Player 9 Series.

Microsoft, Windows Media, and the Windows

logo are trademarks, or registered trademarks of

Microsoft Corporation in the United States and/

or other countries.

About DivX

DivX is a compressed digital video format

created by the DivX

video codec from

DivXNetworks, Inc. This player can play DivX

video files burned on CD-R/RW/ROM discs.

Keeping the same terminology as DVD-Video,

individual DivX video files are called "Titles".

When naming files/titles on a CD-R/RW disc

prior to burning, keep in mind that by default

they will be played in alphabetical order.

Super VCD

01_DVD-S559_En.book Page 6 Friday, November 18, 2005 4:32 PM

Before you start01

Displaying DivX subtitle files

The font sets listed below are available for DivX

external subtitle files. You can see the proper

font set on-screen by setting the Subtitle

Language (in Language settings on page 31)

to match the subtitle file.

This player supports the following language

groups:

Group 1: Albanian (sq), Basque (eu), Catalan (ca),

Danish (da), Dutch (nl), English (en), Faroese (fo),

Finnish (fi), French (fr), German (de), Icelandic (is), Irish

(ga), Italian (it), Norwegian (no), Portuguese (pt), Rhaeto-

Romanic (rm), Scottish (gd), Spanish (es), Swedish (sv)

Group 2: Albanian (sq), Croatian (hr), Czech (cs),

Hungarian (hu), Polish (pl), Romanian (ro), Slovak (sk),

Slovenian (sl)

Group 3: Bulgarian (bg), Byelorussian (be), Macedonian

(mk), Russian (ru), Serbian (sr), Ukrainian (uk)

Group 4: Hebrew (iw), Yiddish (ji)

Group 5: Turkish (tr)

DivX, DivX Certified, and associated logos are

trademarks of DivXNetworks, Inc. and are used

under license.

• Some external subtitle files may be

displayed incorrectly or not at all.

• For external subtitle files the following

subtitle format filename extensions are

supported (please note that these files are

not shown within the disc navigation

menu): .srt, .sub, .ssa, .smi

• The filename of the movie file has to be

repeated at the beginning of the filename

for the external subtitle file.

• The number of external subtitle files which

can be switched for the same movie file is

limited to a maximum of 10.

DivX video compatibility

• Official DivX

Certified product.

• Plays DivX

5, DivX

4, DivX

3 and DivX

VOD video content (in compliance with

DivX

Certified technical requirements).

• File extensions: .avi and .divx (these must

be used for the player to recognize DivX

video files). Note that all files with the .avi

extension are recognized as MPEG4, but not

all of these are necessarily DivX video files

and therefore may not be playable on this

player.

DivX, DivX Certified, and associated logos are

trademarks of DivXNetworks, Inc. and are used

under license.

JPEG file compatibility

• Compatible formats: Baseline JPEG and

EXIF 2.2* still image files up to a resolution

of 3072 x 2048.

*File format used by digital still cameras

• Progressive JPEG compatible: No

• File extensions: .jpg (must be used for the

player to recognize JPEG files – do not use

for other file types)

PC-created disc compatibility

Discs recorded using a personal computer

may not be playable in this unit due to the

setting of the application software used to

create the disc. In these particular instances,

check with the software publisher for more

detailed information.

Discs recorded in packet write mode (UDF

format) are not compatible with this player.

Check the DVD+R/RW, DVD-R/RW or CD-R/

RW software disc boxes for additional

compatibility information.

01_DVD-S559_En.book Page 7 Friday, November 18, 2005 4:32 PM

Connecting up

English

Chapter 2

Connecting up

Easy connections

The setup described here is a basic setup that allows you to play discs using just the cables

supplied with the player. In this setup, stereo audio is played through the speakers in your TV.

Important

• This player is equipped with copy protection technology. Do not connect this player to your TV

via a VCR using audio/video or S-video cables, as the picture from this player will not appear

properly on your TV. (This player may also not be compatible with some combination TV/VCRs

for the same reason; refer to the manufacturer for more information.)

To power

outlet

DIGITAL OUT VIDEO OUT

S VIDEO

COAXIAL

PCM/q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

AC IN

Yellow

White

Red

A/V IN

01_DVD-S559_En.book Page 8 Friday, November 18, 2005 4:32 PM

Connecting up02

1 Connect the VIDEO OUT and AUDIO

OUT L/R jacks to a set of A/V inputs on your

TV.

Use the supplied audio/video cable,

connecting the red and white plugs to the

audio outputs and the yellow plug to the video

output. Make sure you match up the left and

right audio outputs with their corresponding

inputs for correct stereo sound.

See below if you want to use a component or

S-video cable for the video connection.

2 Connect the supplied AC power cable to

the AC IN inlet, then plug into a power

outlet.

Note

• Before unplugging the player from the

power outlet, make sure you first switch it

into standby using either the front panel

STANDBY/ON button, or the remote

control, and wait of the -OFF- message to

disappear from the player’s display.

• For the above reasons, do not plug this

player into a switched power supply found

on some amplifiers and AV receivers.

Connecting using a SCART AV

cable

A SCART-type AV connector is provided for

connection to a TV or AV receiver. The video

output is switchable between ordinary

composite and RGB. See AV Connector Out on

page 31 for how to set it.

The SCART AV connector also outputs analog

audio, so there is no need to also connect the

AUDIO OUT L/R jacks.

1 Use a SCART cable (not supplied) to

connect the AV CONNECTOR (RGB) output

to a SCART AV input on your TV (or AV

receiver).

Connecting using the S-video

output

If your TV (or other equipment) has an S-video

(S1) input, you can use the S-video output on

this player instead of the standard (composite)

output for a better quality picture.

• Use an S-video cable (not supplied) to

connect the S-VIDEO OUT to an S-video

input on your TV (or monitor or AV

receiver).

Line up the small triangle above the jack with

the same mark on the plug before plugging in.

COMPONENT

VIDEO

AUDIO OUT

SCART

01_DVD-S559_En.book Page 9 Friday, November 18, 2005 4:32 PM

Connecting up

English

Connecting using the

component video output

You can use the component video output

instead of the standard video out jack to

connect this player to your TV (or other

equipment). This should give you the best

quality picture from the three types of video

output available.

• Use a component video cable (not

supplied) to connect the COMPONENT

VIDEO OUT jacks to a component video

input on your TV, monitor or AV receiver.

Watching progressive scan video

from the component video outputs

This player can output progressive scan video

from the component video output. Compared

to interlace video, progressive scan video

effectively doubles the scanning rate of the

picture, resulting in a very stable, flicker-free

image.

To set up the player for use with a progressive

scan TV, see Video Output settings on page 31.

When the player is set to output progressive

scan video, the PRGSVE indicator lights in the

front panel display.

Important

• If you connect a TV that is not compatible

with a progressive scan signal and switch

the player to progressive, you will not be

able to see any picture at all. In this case,

switch everything off and reconnect using

the supplied video cable (see Easy

connections on page 8), then switch back

to Interlace (see below).

Switching the video output to interlace

using the front panel controls

Switch the player to standby then, using the

front panel controls, press STANDBY/ON

while pressing  to switch the player back to

Interlace.

DIGITAL OUT VIDEO OUT

S VIDEO

COAXIAL

PCM/q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

S-VIDEO

DIGITAL OUT VIDEO OUT

S VIDEO

COAXIAL

PCM/q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

COMPONENT

VIDEO IN

STANDBY/ON

DVD-S559



01_DVD-S559_En.book Page 10 Friday, November 18, 2005 4:32 PM

Connecting up02

Compatibility of this player with

progressive-scan and high-definition TVs

This player is compatible with progressive

video Macro Vision System Copy Guard.

Consumers should note that not all high-

definition television sets are fully compatible

with this product and may cause artifacts to be

displayed in the picture. In case of 525/625

progressive scan picture problems, it is

recommended that the user switch the

connection to the ‘standard definition’ output

(Interlace). If there are questions regarding our

TV set compatibility with this model, please

contact our customer service center.

This player is fully compatible with the

complete line of YAMAHA products, including

the projectors DPX-1200, LPX-510 and the

plasma monitor PDM-4220.

Connecting to an AV receiver

To enjoy multichannel surround sound you

need to connect this player to an AV receiver

using the digital audio output.

In addition to a digital connection, we

recommend also connecting using the stereo

analog connection.

You’ll probably also want to connect a video

output to your AV receiver. You can use any of

the video outputs available on this player (the

illustration shows a standard (composite)

connection).

1 Connect the DIGITAL AUDIO OUT

COAXIAL jack on this player to a coaxial

digital input on your AV receiver.

Use a coaxial cable (similar to the supplied

video cable) to connect the COAXIAL DIGITAL

AUDIO OUT jack to a coaxial input on your AV

receiver.

2 Connect the analog AUDIO OUT L/R and

VIDEO OUT jacks on this player to a set of

analog audio and video inputs on your AV

receiver.

• You can use the SCART AV connector, or

the S-video or component video jacks to

connect to the AV receiver if you prefer.

DIGITAL OUT VIDEO OUT

S VIDEO

COAXIAL

PCM/q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

AV receiver

DIGITAL IN

(COAXIAL)

AV receiver

DIGITAL OUT VIDEO OUT

S VIDEO

COAXIAL

PCM/q DIGITAL

/DTS/MPEG

COMPONENT

VIDEO

AUDIO OUT

AUDIO/

VIDEO IN

01_DVD-S559_En.book Page 11 Friday, November 18, 2005 4:32 PM

Controls and displays

English

Chapter 3

Controls and displays

Front panel

1 STANDBY/ON (page 14)

2 Disc tray

3  (page 17)

4  (page 17)

5  and  (page 17)

6  (page 16)

7 Display

8  (page 17)

DVD-S559

3 4

6 7

01_DVD-S559_En.book Page 12 Friday, November 18, 2005 4:32 PM

Controls and displays03

Remote control

1(STANDBY/ON) (page 14)

2 Number buttons (page 17)

3 PLAY MODE (page 23)

4 SURROUND (page 28)

5 TOP MENU (page 18)

6 ENTER & cursor buttons (page 14)

7 HOME MENU (page 14)

8 SUBTITLE (page 26)

9 ANGLE (page 27)

10  and  (SKIP) (page 17)

11  (STOP) (page 17)

12 OPEN/CLOSE (page 16)

13 ENTER (page 14)

14 CLEAR (page 25)

15 ON SCREEN (page 27)

16 MENU (page 18)

17 RETURN (page 14)

18 AUDIO (page 27)

19 ZOOM (page 27)

20  and  (SLOW/SEARCH)

(page 17, 20

)

21  (PLAY) (page 17)

22  (PAUSE) (page 17)

Using the remote control

Keep in mind the following when using the

remote control:

• Make sure that there are no obstacles

between the remote and the remote sensor

on the unit.

• The remote has a range of about 7m.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is

shining on the unit’s remote sensor.

• Remote controllers for different devices

can interfere with each other. Avoid using

remotes for other equipment located close

to this unit.

• Replace the batteries when you notice a

fall off in the operating range of the remote.

STANDBY/ON

CLEAR

OPEN/CLOSE

ENTER

PLAY MODE

SURROUND

ON SCREEN

TOP MEN

TOP MENU

SUBTITLE

HOME

RETURN

ANGLE

ZOOM

AUDIO

SKIP

SLOW/SEARCH

STOP

PAUSE

PLAY

ENTER

01_DVD-S559_En.book Page 13 Friday, November 18, 2005 4:32 PM

Getting started

English

Chapter 4

Getting started

Switching on

After making sure that everything is connected

properly and that the player is plugged in,

press STANDBY/ON on the front panel or

remote control to switch the player on.

Also, switch on your TV and make sure that it is

set to the input you connected the DVD player

to.

FAQ

• My DVD player switches on but there is

nothing displayed on my TV.

Make sure that the TV is set to the correct

video input (not a TV channel). For

example, if you connected this player to the

VIDEO 1 inputs on your TV, switch your TV

to VIDEO 1.

Note

• This player features a screen saver and an

auto power off function. If the player is

stopped and no button is pressed for

around five minutes, the screen saver

starts. If the disc tray is closed but no disc

is playing and no control is pressed for

about 30 minutes, the player automatically

goes into standby.

Using the on-screen displays

For ease of use, this player makes extensive

use of graphical on-screen displays (OSDs).

All the screens are navigated in basically the

same way, using the cursor buttons

() to change the highlighted item and

pressing ENTER to select it.

Note

• From here on in this manual, the word

‘select’ generally means use the cursor

buttons to highlight an item on-screen,

then press ENTER.

STANDBY/ON

DVD-S559

Button What it does

HOME

Display/exit the on-screen display.

Changes the highlighted menu

item.

ENTER

Selects the highlighted menu

item (both

ENTER buttons on the

remote work in exactly the same

way).

RETURN Returns to the main menu

without saving changes.

STANDBY/ON

CLEAR

OPEN/CLOSE

ENTER

PLAY MODE

SURROUND

ON SCREEN

TOP MEN

TOP MENU

SUBTITLE

HOME

RETURN

ANGLE

ZOOM

AUDIO

SKIPSKIP SLOW/SEARCHSLOW/SEARCH

STOP PAUSE PLAY

ENTER

01_DVD-S559_En.book Page 14 Friday, November 18, 2005 4:32 PM

Getting started04

Setting up the player for your

If you have a widescreen (16:9) TV, you should

setup the player so that the picture will be

presented correctly. If you have a conventional

(4:3) TV, you can leave the player on the default

setting and move on to the next section.

1 Press HOME MENU and select ‘Initial

Settings’.

2 Select ‘TV Screen’ from the ‘Video

Output’ settings.

3 If you have a widescreen (16:9) TV,

select ‘16:9 (Wide)’.

If you have a conventional (4:3) TV, you can

change the setting from 4:3 (Letter Box) to 4:3

(Pan & Scan) if you prefer. See Video Output

settings on page 31 for more details.

4 Press HOME MENU to exit the menu

screen.

Setting the language of this

player’s on-screen displays

This sets the language of the player’s on-

screen displays.

1 Press HOME MENU and select ‘Initial

Settings’.

2 Select ‘OSD Language’ from the

‘Display’ settings.

3 Select a language.

The on-screen language will change according

to your selection.

4 Press HOME MENU to exit the menu

screen.

Initial Settings

Digital Audio Out

Video Outpu

Language

Display

Options

TV Screen

Component Out

AV Connector Out

4:3 (Letter Box)

4:3 (Pan&Scan)

16:9 (Wide)

Initial Settings

Digital Audio Out

Video Output

Language

Display

Options

OSD Language

Angle Indicator

English

français

Deutsch

Italiano

Español

Initial Settings

01_DVD-S559_En.book Page 15 Friday, November 18, 2005 4:32 PM

Getting started

English

Playing discs

The basic playback controls for playing DVD,

CD, Video CD/Super VCD, DivX video and MP3/

WMA discs are covered here. Further functions

are detailed in the next chapter.

For details on playing JPEG picture discs, see

Viewing a JPEG slideshow on page 21.

Important

• Throughout this manual, the term ‘DVD’

means DVD-Video, DVD+R/RW and DVD-

R/RW. If a function is specific to a

particular kind of DVD disc, it is specified.

1 If the player isn’t already on, press

(STANDBY/ON) to switch it on.

If you’re playing a DVD, disc containing DivX

video files or Video CD/Super VCD, also turn on

your TV and make sure that it is set to the

correct video input.

2 Press OPEN/CLOSE () to open the disc

tray.

3 Load a disc.

Load a disc with the label side facing up, using

the disc tray guide to align the disc (if you’re

loading a double-sided DVD disc, load it with

the side you want to play face down).

4 Press  (play) to start playback.

If you’re playing a DVD or Video CD/Super VCD,

an on-screen menu may appear. See DVD-

Video disc menus on page 18 and Video CD/

Super VCD PBC menus on page 18 for more on

how to navigate these.

• If you’re playing a containing DivX video

files or MP3/WMA audio files, it may take a

few seconds before playback starts, etc.

This is normal.

Note

• You may find with some DVD discs that

some playback controls don’t work in

certain parts of the disc. This is not a

malfunction.

• If a disc contains a mixture of DivX video

and other media file types (MP3, for

example), first select whether to play the

DivX video files (DivX)or the other media

file types (MP3 / WMA / JPEG) from the

on-screen display.

STANDBY/ON

CLEAR

OPEN/CLOSE

ENTER

PLAY MODE

SURROUND

ON SCREEN

TOP MEN

TOP MENU

SUBTITLE

HOME

RETURN

ANGLE

ZOOM

AUDIO

SKIP

SLOW/SEARCH

STOP

PAUS E

PAUSE

PLAY

ENTER

01_DVD-S559_En.book Page 16 Friday, November 18, 2005 4:32 PM

Getting started04

Basic playback controls

The table below shows the basic controls on

the remote for playing discs. The following

chapter covers other playback features in more

detail.

Resume and Last Memory

When you stop playback of a DVD, CD, Video

CD/Super VCD or DivX video discs, RESUME is

shown in the display indicating that you can

resume playback again from that point.

If the disc tray is not opened, the next time you

start playback the display shows RESUME and

playback resumes from the resume point. (If

you want to clear the resume point, press 

(stop) while RESUME is displayed.)

With DVDs and Video CD/ Super VCDs, if you

take the disc out of the player after stopping

playback, the last play position is stored in

memory. If the next disc you load is the same

one, the display shows LAST MEM and

playback will resume. For DVD-Video discs, the

player stores the play position of the last five

discs. When one of these discs is next loaded,

you can resume playback.

Note

• The Last Memory function doesn’t work

with VR format DVD-RW discs.

• If you don’t need the Last Memory function

when you stop a disc, you can press OPEN/

CLOSE () to stop playback and open the

disc tray.

Button What it does

 Starts playback.

If the display shows RESUME or

LAST MEM playback starts from the

resume or last memory point (see

also Resume and Last Memory

below.)

 Pauses a disc that’s playing, or

restarts a paused disc.

 Stops playback.

Yamaha DVD-S559 Manuale del proprietario

Marca: Yamaha

Modello: DVD-S559

Categoria: Lettori DVD

Tipo: Manuale del proprietario

Scarica il pdf

rapporto

in altre lingue

English: Yamaha DVD-S559 Owner's manual
français: Yamaha DVD-S559 Le manuel du propriétaire
Deutsch: Yamaha DVD-S559 Bedienungsanleitung
Nederlands: Yamaha DVD-S559 de handleiding
dansk: Yamaha DVD-S559 Brugervejledning
svenska: Yamaha DVD-S559 Bruksanvisning
Türkçe: Yamaha DVD-S559 El kitabı
română: Yamaha DVD-S559 Manualul proprietarului

Yamaha DVD-S559 Manuale del proprietario

Yamaha DVD-S559 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti