Gigabyte GA-E6010N Manuale del proprietario

Marca: Gigabyte

Modello: GA-E6010N

Tipo: Manuale del proprietario

GA-E6010N

User's Manual

Rev. 1001

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product

are recyclable and reusable. GIGABYTE works with you to protect the environment.

- 2 -

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE without

prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in any form

or by any means without GIGABYTE's prior written permission.

In order to assist in the use of this product, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV: 1.0"

means the revision of the motherboard is 1.0. Check your motherboard revision before updating

motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

GA-E6010N Motherboard Layout ....................................................................................4

Chapter 1 Hardware Installation .....................................................................................5

1-1 Installation Precautions .................................................................................... 5

1-2 Product Specications ...................................................................................... 6

1-3 Installing the Memory ....................................................................................... 8

1-4 Installing an Expansion Card ........................................................................... 8

1-5 Back Panel Connectors .................................................................................... 8

1-6 Internal Connectors ........................................................................................ 10

Chapter 2 BIOS Setup ..................................................................................................15

2-1 Startup Screen ............................................................................................... 15

2-2 M.I.T. .............................................................................................................. 16

2-3 System Information ........................................................................................ 19

2-4 BIOS Features ............................................................................................... 20

2-5 Peripherals ..................................................................................................... 23

2-6 Power Management ....................................................................................... 25

2-7 Save & Exit ..................................................................................................... 27

Chapter 3 Appendix ......................................................................................................28

Drivers Installation ..................................................................................................... 28

Regulatory Notices .................................................................................................... 29

Contact Us ................................................................................................................ 32

- 4 -

GA-E6010N Motherboard Layout

* The box contents above are for reference only and the actual items shall depend on the product package you obtain.

The box contents are subject to change without notice.

Box Contents

5GA-E6010N motherboard

5Motherboard driver disc 5Two SATA cables

5User's Manual 5I/O Shield

KB_MS_USB

ATX

GA-E6010N

F_AUDIO

AUDIO

B_BIOS

DDR3_1

DDR3_2

BAT

F_PANEL

ATX_12V

COMA

CODEC

CLR_CMOS

M_BIOS

VGA

USB_LAN

PCI

F_USB1

F_USB2

COMB

SYS_FAN

APU FT3

HDMI

R_USB30

Realtek®

GbE LAN

SPDIF_O

PCIe to

PCI Bridge

0 1

SATA3

LPT

iTE®

Super I/O

CPU_FAN

- 5 -

Chapter 1 Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keep your hands dry and rst touch a metal object to eliminate static electricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product, please consult a certied computer technician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

- 6 -

1-2 ProductSpecications

APU Built in an AMD® E1-6010 (1.35 GHz) APU with Radeon™ R2 graphics SoC

* Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage

to these components.

2MB L2 Cache

Memory 2 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* The maximum 32 GB of system memory can be supported using 16 GB (or above)

memory modules. GIGABYTE will update the memory support list on the ofcial

website when the memory modules are available on the market.

Support for DDR3 1333/1066 MHz memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated in the SoC:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200

- 1 x HDMI port, supporting a maximum resolution of 4096x2160

* Support for HDMI 1.4a version.

- Maximum shared memory of 2 GB

Audio Realtek® ALC887 codec

High Denition Audio

2/4/5.1/7.1-channel

* To congure 7.1-channel audio, you need to open the audio software and select

Device advanced settings > Playback Device to change the default setting rst.

Please visit GIGABYTE's website for details on conguring the audio software.

Support for S/PDIF Out

LAN Realtek® GbE LAN chip (1000 Mbit/100 Mbit)

Expansion Slots 1 x PCI slot

Storage Interface Integrated in the SoC:

- 2 x SATA 6Gb/s connectors

USB Integrated in the SoC:

- 2 x USB 3.1 Gen 1 ports on the back panel

- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through

the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

1 x 4-pin ATX 12V power connector

2 x SATA 6Gb/s connectors

1 x APU fan header

1 x system fan header

1 x front panel header

1 x front panel audio header

1 x S/PDIF Out header

2 x USB 2.0/1.1 headers

1 x serial port header

1 x chassis intrusion header

1 x Clear CMOS jumper

- 7 -

Back Panel

Connectors

1 x PS/2 keyboard/mouse port

1 x parallel port

1 x serial port

1 x D-Sub port

1 x HDMI port

2 x USB 3.1 Gen 1 ports

4 x USB 2.0/1.1 ports

1 x RJ-45 port

3 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Fan speed control

* Whether the fan speed control function is supported will depend on the cooler you

install.

BIOS 2 x 64 Mbit ash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for @BIOS

Support for Q-Flash

Support for Xpress Install

Bundled

Software Norton® Internet Security (OEM version)

Operating

System

Support for Windows 10 64-bit

Support for Windows 7 64-bit

* Please download the "Windows USB Installation Tool" from GIGABYTE's website

and install it before installing Windows 7.

Form Factor Mini-ITX Form Factor; 17.0cm x 17.0cm

* GIGABYTE reserves the right to make any changes to the product specications and product-related information without

prior notice.

Please visit the Support\Utility List page on GIGABYTE's website to download the latest version

of apps.

Please visit GIGABYTE's website for details on hardware installation.

Please visit GIGABYTE's website for support lists of memory modules.

- 8 -

1-3 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the

same capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

1-5 Back Panel Connectors

USB 2.0/1.1 Port

The USB port supports the USB 2.0/1.1 specication. Use this port for USB devices.

PS/2 Keyboard/Mouse Port

Use this port to connect a PS/2 mouse or keyboard.

Parallel Port

Use the parallel port to connect devices such as a printer, scanner and etc. The parallel port is also called

a printer port.

Serial Port

Use the serial port to connect devices such as a mouse, modem or other peripherals.

D-Sub Port

The D-Sub port supports a 15-pin D-Sub connector and supports a maximum resolution of 1920x1200

(the actual resolutions supported depend on the monitor being used). Connect a monitor that supports

D-Sub connection to this port.

USB 3.1 Gen 1 Port

The USB 3.1 Gen 1 port supports the USB 3.1 Gen 1 specication and is compatible to the USB 2.0

specication. Use this port for USB devices.

•When removing the cable connected to a back panel connector, rst remove the cable from your

device and then remove it from the motherboard.

•When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent

an electrical short inside the cable connector.

- 9 -

RJ-45 LAN Port

The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following

describes the states of the LAN port LEDs.

Activity LED

Connection/

Speed LED

LAN Port

Activity LED:

Connection/Speed LED:

State Description

Orange 1 Gbps data rate

Green 100 Mbps data rate

Off 10 Mbps data rate

State Description

Blinking Data transmission or receiving is occurring

Off No data transmission or receiving is occurring

HDMI Port

The HDMI port is HDCP compliant and supports Dolby TrueHD and DTS HD

Master Audio formats. It also supports up to 192KHz/24bit 7.1-channel LPCM

audio output. You can use this port to connect your HDMI-supported monitor. The maximum supported

resolution is 4096x2160, but the actual resolutions supported are dependent on the monitor being used.

Audio Jack Congurations:

Jack Headphone/

2-channel 4-channel 5.1-channel 7.1-channel

Line In/Rear Speaker Out aaa

Line Out/Front Speaker Out aaaa

Mic In/Center/Subwoofer Speaker Out a a

Front Panel Line Out/Side Speaker Out a

Please visit GIGABYTE's website for more audio software information.

After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The

item name may differ depending on your operating system.)

 Dual-DisplayCongurationsfortheOnboardGraphics:

Dual-display congurations are supported after you install motherboard drivers in OS.

LineIn/RearSpeakerOut(Blue)

The line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.

LineOut/FrontSpeakerOut(Green)

The line out jack.

MicIn/Center/SubwooferSpeakerOut(Pink)

The Mic in jack.

•The integrated HD (High Denition) audio provides jack retasking capability that allows the user

to change the function for each jack through the audio driver.

•To congure 7.1-channel audio, you need to open the audio software and select Device advanced

settings > Playback Device to change the default setting rst. Please visit GIGABYTE's website

for details on conguring the audio software.

- 10 -

Read the following guidelines before connecting external devices:

•First make sure your devices are compliant with the connectors you wish to connect.

•Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

•After installing the device and before turning on the computer, make sure the device cable has

been securely attached to the connector on the motherboard.

1-6 Internal Connectors

1)ATX_12V

2)ATX

3)CPU_FAN

4)SYS_FAN

5)SATA3 0/1

6) F_PANEL

7)SPDIF_O

8) F_AUDIO

9) F_USB1/F_USB2

10)COMB

11)CLR_CMOS

12)BAT

13)CI

711

8 12

- 11 -

1/2)ATX_12V/ATX(2x212VPowerConnectorand2x12MainPowerConnector)

With the use of the power connector, the power supply can supply enough stable power to all the components

on the motherboard. Before connecting the power connector, rst make sure the power supply is turned

off and all devices are properly installed. The power connector possesses a foolproof design. Connect the

power supply cable to the power connector in the correct orientation.

The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected,

the computer will not start.

3/4)CPU_FAN/SYS_FAN(FanHeaders)

The motherboard has a 3-pin CPU fan header (CPU_FAN) and a 4-pin system fan header (SYS_FAN).

Most fan headers possess a foolproof insertion design. When connecting a fan cable, be sure to connect it

in the correct orientation (the black connector wire is the ground wire). The speed control function requires

the use of a fan with fan speed control design. For optimum heat dissipation, it is recommended that a

system fan be installed inside the chassis.

ATX_12V:

Pin No. Denition

1 GND

2 GND

3 +12V

4 +12V

These fan headers are not conguration jumper blocks. Do not place a jumper cap on the headers.

CPU_FAN: SYS_FAN:

Pin No. Denition

1 GND

2 Speed Control

3 Sense

Pin No. Denition

1 GND

2 Speed Control

3 Sense

4 VCC

DEBUG

PORT

G.QBOFM

131

2412

ATX

ATX:

Pin No. Denition Pin No. Denition

1 3.3V 13 3.3V

2 3.3V 14 -12V

3 GND 15 GND

4 +5V 16 PS_ON (soft On/Off)

5 GND 17 GND

6 +5V 18 GND

7 GND 19 GND

8 Power Good 20 NC

9 5VSB (stand by +5V) 21 +5V

10 +12V 22 +5V

11 +12V (Only for 2x12-pin

ATX)

23 +5V (Only for 2x12-pin ATX)

12 3.3V (Only for 2x12-pin

ATX)

24 GND (Only for 2x12-pin

ATX)

ATX_12V

SYS_FAN

DEBUG

PORT

G.QBOFM

CPU_FAN

- 12 -

5) SATA30/1(SATA6Gb/sConnectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device.

Pin No. Denition Pin No. Denition

1 GND 5 RXN

2 TXP 6 RXP

3 TXN 7 GND

4 GND

6) F_PANEL(FrontPanelHeader)

Connect the power switch, reset switch, and system status indicator on the chassis to this header according

to the pin assignments below. Note the positive and negative pins before connecting the cables.

•PW (Power Switch, Red):

Connects to the power switch on the chassis front panel. You may congure the way to turn off your

system using the power switch (refer to Chapter 2, "BIOS Setup," "Power Management," for more

information).

•HD (Hard Drive Activity LED, Blue):

Connects to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive

is reading or writing data.

•RES (Reset Switch, Green):

Connects to the reset switch on the chassis front panel. Press the reset switch to restart the computer

if the computer freezes and fails to perform a normal restart.

•NC (Purple): No connection.

•PLED (Power LED, Yellow):

System Status LED

S0 On

S3/S4/S5 Off

Connects to the power status indicator on the chassis front panel. The LED is on

when the system is operating. The LED is off when the system is in S3/S4 sleep

state or powered off (S5).

The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch,

power LED, hard drive activity LED and etc. When connecting your chassis front panel module to this header,

make sure the wire assignments and the pin assignments are matched correctly.

PLED-

PW-

PLED+

PW+

HD-

RES+

HD+

RES-

Power Switch

Hard Drive

Activity LED

Reset Switch

Power LED

DEBUG

PORT

G.QBOFM

DEBUG

PORT

G.QBOFM

0 1

SATA3

7) SPDIF_O(S/PDIFOutHeader)

This header supports digital S/PDIF Out and connects a S/PDIF digital audio cable (provided by expansion

cards) for digital audio output from your motherboard to certain expansion cards like graphics cards and

sound cards. For example, some graphics cards may require you to use a S/PDIF digital audio cable for

digital audio output from your motherboard to your graphics card if you wish to connect an HDMI display

to the graphics card and have digital audio output from the HDMI display at the same time.

For information about connecting the S/PDIF digital audio cable, carefully read the manual for your

expansion card.

Pin No. Denition

1 SPDIFO

2 GND

- 13 -

9) F_USB1/F_USB2(USB2.0/1.1Headers)

The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an

optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 Power (5V) 6 USB DY+

2 Power (5V) 7 GND

3 USB DX- 8 GND

4 USB DY- 9 No Pin

5 USB DX+ 10 NC

•Do not plug the IEEE 1394 bracket (2x5-pin) cable into the USB header.

•Prior to installing the USB bracket, be sure to turn off your computer and unplug the power cord from the

power outlet to prevent damage to the USB bracket.

10) COMB(SerialPortHeader)

The COM header can provide one serial port via an optional COM port cable. For purchasing the optional

COM port cable, please contact the local dealer.

Pin No. Denition Pin No. Denition

1 NDCD- 6 NDSR-

2 NSIN 7 NRTS-

3 NSOUT 8 NCTS-

4 NDTR- 9 NRI-

5 GND 10 No Pin

8) F_AUDIO(FrontPanelAudioHeader)

The front panel audio header supports High Denition audio (HD). You may connect your chassis front

panel audio module to this header. Make sure the wire assignments of the module connector match the

pin assignments of the motherboard header. Incorrect connection between the module connector and the

motherboard header will make the device unable to work or even damage it.

Some chassis provide a front panel audio module that has separated connectors on each wire

instead of a single plug. For information about connecting the front panel audio module that has

different wire assignments, please contact the chassis manufacturer.

Pin No. Denition Pin No. Denition

1 MIC2_L 6 Sense

2 GND 7 FAUDIO_JD

3 MIC2_R 8 No Pin

4 NC 9 LINE2_L

5 LINE2_R 10 Sense

- 14 -

12) BAT(Battery)

The battery provides power to keep the values (such as BIOS congurations, date, and time information)

in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low

level, or the CMOS values may not be accurate or may be lost.

You may clear the CMOS values by removing the battery:

1. Turn off your computer and unplug the power cord.

2. Gently remove the battery from the battery holder and wait for one minute. (Or use a

metal object like a screwdriver to touch the positive and negative terminals of the battery

holder, making them short for 5 seconds.)

3. Replace the battery.

4. Plug in the power cord and restart your computer.

•Always turn off your computer and unplug the power cord before replacing the battery.

•Replace the battery with an equivalent one. Damage to your devices may occur if the battery is replaced

with an incorrect model.

•Contact the place of purchase or local dealer if you are not able to replace the battery by yourself or uncertain

about the battery model.

•When installing the battery, note the orientation of the positive side (+) and the negative side (-) of the battery

(the positive side should face up).

•Used batteries must be handled in accordance with local environmental regulations.

11) CLR_CMOS(ClearCMOSJumper)

Use this jumper to clear the BIOS conguration and reset the CMOS values to factory defaults. To clear

the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.

•Always turn off your computer before clearing the CMOS values.

•After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually

congure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS congurations).

Open: Normal

Short: Clear CMOS Values

13) CI(ChassisIntrusionHeader)

This motherboard provides a chassis detection feature that detects if the chassis cover has been removed.

This function requires a chassis with chassis intrusion detection design.

Pin No. Denition

1 Signal

2 GND

- 15 -

Chapter2 BIOSSetup

•Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS,

it is recommended that you not ash the BIOS. To ash the BIOS, do it with caution. Inadequate BIOS ashing

may result in system malfunction.

•It is recommended that you not alter the default settings (unless you need to) to prevent system instability or other

unexpected results. Inadequately altering the settings may result in system's failure to boot. If this occurs, try to

clear the CMOS values and reset the board to default values. (Refer to the "Load Optimized Defaults" section in

this chapter or introductions of the battery/clear CMOS jumper in Chapter 1 for how to clear the CMOS values.)

BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the

motherboard. Its major functions include conducting the Power-On Self-Test (POST) during system startup,

saving system parameters and loading operating system, etc. BIOS includes a BIOS Setup program that allows

the user to modify basic system conguration settings or to activate certain system features.

When the power is turned off, the battery on the motherboard supplies the necessary power to the CMOS to

keep the conguration values in the CMOS.

To access the BIOS Setup program, press the <Delete> key during the POST when the power is turned on.

To upgrade the BIOS, use either the GIGABYTE Q-Flash or @BIOS utility.

•Q-Flash allows the user to quickly and easily upgrade or back up BIOS without entering the operating system.

•@BIOS is a Windows-based utility that searches and downloads the latest version of BIOS from the Internet

and updates the BIOS.

2-1 Startup Screen

The following startup Logo screen will appear when the computer boots.

Function Keys

•When the system is not stable as usual, select the LoadOptimizedDefaults item to set your system to its defaults.

•The BIOS Setup menus described in this chapter are for reference only and may differ by BIOS version.

On the main menu of the BIOS Setup program, press arrow keys to move among the items and press <Enter>

to accept or enter a sub-menu. Or you can use your mouse to select the item you want.

- 16 -

2-2 M.I.T.

Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall

system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory

and reduce the useful life of these components. This page is for advanced users only and we recommend you not to

alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings

may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.)

This section provides information on the BIOS version, CPU base clock, CPU frequency, memory frequency,

total memory size, CPU temperature, Vcore, and memory voltage.

`M.I.T. Current Status

This screen provides information on CPU/memory frequencies/parameters.

`AdvancedFrequencySettings

&CPU Clock Control

Allows you to manually set the CPU base clock in 0.01 MHz increments. (Default: Auto)

Important:It is highly recommended that the CPU frequency be set in accordance with the CPU

specications.

&CPUNorthBridgeFrequency

Allows you to manually set the CPU North Bridge frequency. The adjustable range is from 400 MHz to 2000 MHz.

&CPU Clock Ratio

Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU

being installed.

&CPUFrequency

Displays the current operating CPU frequency.

`Advanced CPU Core Settings

&CPUClockRatio,CPUFrequency

The settings above are synchronous to those under the same items on the AdvancedFrequencySettings

menu.

- 17 -

&AMD Cool&Quiet function

Enabled Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce

heat output from your computer and its power consumption. (Default)

Disabled Disables this function.

&SVM Mode

Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems

and applications in independent partitions. With virtualization, one computer system can function as multiple

virtual systems. (Default: Enabled)

&C6 Mode

Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the

CPU core frequency will be reduced during system halt state to decrease power consumption. The C6

state is a more enhanced power-saving state than C1. (Default: Enabled)

&ExtremeMemoryProle(X.M.P.)(Note)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled Disables this function. (Default)

Prole1 Uses Prole 1 settings.

Prole2 (Note) Uses Prole 2 settings.

&System Memory Multiplier

Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD

data. (Default: Auto)

&MemoryFrequency(MHz)

This value is automatically adjusted according to the System Memory Multiplier settings.

`Advanced Memory Settings

ExtremeMemoryProle(X.M.P.)(Note),

SystemMemoryMultiplier,MemoryFrequency(MHz)

The settings above are synchronous to those under the same items on the AdvancedFrequencySettings

menu.

&Memory Timing Mode

Manual and Advanced Manual allows the Rank Interleaving

and memory timing settings below to be

congurable.

Options are: Auto (default), Manual, Advanced Manual.

&ProleDDRVoltage

When using a non-XMP memory module or ExtremeMemoryProle(X.M.P.) is set to Disabled, the value

is displayed according to your memory specication. When ExtremeMemoryProle(X.M.P.) is set to

Prole1 or Prole2, the value is displayed according to the SPD data on the XMP memory.

&Rank Interleaving

Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically

congure this setting. (Default: Auto)

(Note) This item is present only when you install a memory module that supports this feature.

- 18 -

`Channel A Memory Sub Timings

This sub-menu provides memory timing settings for each channel of memory. The respective timing setting

screens are congurable only when Memory Timing Mode is set to Manual or Advanced Manual. Note:

Your system may become unstable or fail to boot after you make changes on the memory timings. If this

occurs, please reset the board to default values by loading optimized defaults or clearing the CMOS values.

`Advanced Voltage Settings

This sub-menu allows you to set CPU, chipset and memory voltages.

`PC Health Status

&ResetCaseOpenStatus

Disabled Keeps or clears the record of previous chassis intrusion status. (Default)

Enabled Clears the record of previous chassis intrusion status and the CaseOpen eld will

show "No" at next boot.

&CaseOpen

Displays the detection status of the chassis intrusion detection device attached to the motherboard CI

header. If the system chassis cover is removed, this eld will show "Yes", otherwise it will show "No". To

clear the chassis intrusion status record, set ResetCaseOpenStatus to Enabled, save the settings to

the CMOS, and then restart your system.

&CPU Vcore/DRAM Voltage/+3.3V/+5V/+12V

Displays the current system voltages.

&CPU/System Temperature

Displays current CPU/system temperature.

&CPU/SystemFanSpeed

Displays current CPU/system fan speeds.

&CPUFanSpeedControl

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the CPU temperature. You can

adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed under the FanSpeedPercentage item.

Full Speed Allows the fan to run at full speeds.

&FanSpeedPercentage

Allows you to control the fan speed. This item is congurable only when CPUFanSpeedControl is set

to Manual. Options are: 0.75 PWM value /oC ~ 2.50 PWM value /oC.

&SystemFanSpeedControl

Allows you to determine whether to enable the fan speed control function and adjust the fan speed.

Normal Allows the fan to run at different speeds according to the CPU temperature. You can

adjust the fan speed with EasyTune based on your system requirements. (Default)

Silent Allows the fan to run at slow speeds.

Manual Allows you to control the fan speed under the FanSpeedPercentage item.

Full Speed Allows the fan to run at full speeds.

&FanSpeedPercentage

Allows you to control the fan speed. This item is congurable only when SystemFanSpeedControl is

set to Manual. Options are: 0.75 PWM value /oC ~ 2.50 PWM value /oC.

- 19 -

2-3 System Information

This section provides information on your motherboard model and BIOS version. You can also select the default

language used by the BIOS and manually set the system time.

&System Language

Selects the default language used by the BIOS.

&System Date

Sets the system date. The date format is week (read-only), month, date, and year. Use <Enter> to switch

between the Month, Date, and Year elds and use the <Page Up> or <Page Down> key to set the desired

value.

&System Time

Sets the system time. The time format is hour, minute, and second. For example, 1 p.m. is 13:0:0. Use

<Enter> to switch between the Hour, Minute, and Second elds and use the <Page Up> or <Page Down>

key to set the desired value.

&Access Level

Displays the current access level depending on the type of password protection used. (If no password is set,

the default will display as Administrator.) The Administrator level allows you to make changes to all BIOS

settings; the User level only allows you to make changes to certain BIOS settings but not all.

- 20 -

2-4 BIOSFeatures

&BootOptionPriorities

Species the overall boot order from the available devices. For example, you can set hard drive as the

rst priority (BootOption#1) and DVD ROM drive as the second priority (BootOption#2). The list only

displays the device with the highest priority for a specic type. For example, only hard drive dened as the

rst priority on the Hard Drive BBS Priorities submenu will be presented here.

Removable storage devices that support GPT format will be prexed with "UEFI:" string on the boot device

list. To boot from an operating system that supports GPT partitioning, select the device prexed with "UEFI:"

string.

Or if you want to install an operating system that supports GPT partitioning such as Windows 10 64-bit,

select the optical drive that contains the Windows 10 64-bit installation disc and is prexed with "UEFI:"

string.

&HardDrive/CD/DVDROMDrive/FloppyDrive/NetworkDeviceBBSPriorities

Species the boot order for a specic device type, such as hard drives, optical drives, oppy disk drives,

and devices that support Boot from LAN function, etc. Press <Enter> on this item to enter the submenu that

presents the devices of the same type that are connected. This item is present only if at least one device

for this type is installed.

&Bootup NumLock State

Enables or disables Numlock feature on the numeric keypad of the keyboard after the POST. (Default:

Enabled)

&SecurityOption

Species whether a password is required every time the system boots, or only when you enter BIOS Setup.

After conguring this item, set the password(s) under the Administrator Password/User Password item.

Setup A password is only required for entering the BIOS Setup program.

System A password is required for booting the system and for entering the BIOS Setup program.

(Default)

&FullScreenLOGOShow

Allows you to determine whether to display the GIGABYTE Logo at system startup. Disabled skips the

GIGABYTE Logo when the system starts up. (Default: Enabled)

La pagina si sta caricando...

Gigabyte GA-E6010N Manuale del proprietario

Marca: Gigabyte

Modello: GA-E6010N

Tipo: Manuale del proprietario

Scarica PDF

rapporto

in altre lingue

English: Gigabyte GA-E6010N Owner's manual

Gigabyte GA-E6010N Manuale del proprietario

Gigabyte GA-E6010N Manuale del proprietario

in altre lingue

Documenti correlati