Diebold Nixdorf BEETLE /iPOS plus Manuale utente

Categoria
Parete
Tipo
Manuale utente

Questo manuale è adatto anche per

BEETLE /iPOS plus
All-in-one POS System
User Manual
We would like to know your opinion on this publication.
Please send us a copy of this page if you have any constructive criticism.
We would like to thank you in advance for your comments.
With kind regards,
Diebold Nixdorf Pte Ltd
Technical Documentation R&D SAT22
Wohlrabedamm 31
D-13629 Berlin
E-Mail: manuals.hardware@Dieboldnixdorf.com
Order No.: 01750284105 D
Your opinion:
BEETLE /iPOS plus
All-in-one POS System
User Manual
Edition September 2018
All brand and product names mentioned in this document are trademarks of their
respective owners.
Copyright © Diebold Nixdorf International GmbH, 2018
The reproduction, transmission or use of this document or its contents is not permitted without
express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model or
design, are reserved.
Delivery subject to availability; technical modifications possible.
Contents
About This Manual ......................................................................... 1
Introduction ................................................................................... 2
Manufacturer´s Certification .......................................................... 3
Europe-EU Declaration of Conformity ............................................... 3
FCC Radiation Exposure Statement .................................................... 5
FCC-Class A Declaration ..................................................................... 5
BSMI (EMC for Taiwan) ...................................................................... 6
Energy Efficiency ................................................................................ 6
Supplier’s Declaration of Conformity ............................................. 7
Care of the BEETLE /iPOS plus ........................................................ 8
Recycling the BEETLE /iPOS plus ..................................................... 9
Warranty ...................................................................................... 10
Important Notes ............................................................................... 10
Safety Notes ..................................................................................... 11
Overview ...................................................................................... 13
Front View with Stand ...................................................................... 13
Back View with Stand ....................................................................... 14
Important note for removal of back cover .................................. 15
AC Power Adapter ............................................................................ 16
Front Panel ....................................................................................... 17
Initial setup .................................................................................. 18
Unpacking and Checking the Delivery Unit ...................................... 18
Setting Up the Device ................................................................... 19
Ergonomic Terminal Workplace ....................................................... 19
Basic settings ................................................................................ 21
Components ..................................................................................... 21
Processor types............................................................................ 21
RAM ............................................................................................. 21
Hard Disk ..................................................................................... 21
Display ......................................................................................... 21
Replacing the Lithium Battery ...................................................... 22
Projected Capacitive Touch Screen ............................................... 24
General Information ........................................................................ 24
Instructions for Using the Touch Screen .......................................... 24
Cleaning Instructions ....................................................................... 25
Resistive Touch Screen ................................................................. 26
General Information ........................................................................ 26
Construction of the Resistive Touch Screen .................................... 26
Instructions for using the Touch Screen .......................................... 27
Cleaning Instructions ....................................................................... 27
Replacement of the RAM module ................................................ 28
Planning the installation .............................................................. 29
Dimensions ...................................................................................... 29
Desktop version ............................................................................... 29
Wall mount version .......................................................................... 30
Required operation space ................................................................ 30
Installation site requirements .......................................................... 31
Desktop version ........................................................................... 31
Wall mount version ..................................................................... 31
lnstalling to a stand ...................................................................... 32
Preparing the stand ......................................................................... 32
Preparing the display ....................................................................... 33
Two-cable connection ................................................................. 33
Full cables connection ................................................................. 35
Installing the stand........................................................................... 37
User Accessible I/O ...................................................................... 40
Connecting cables ............................................................................ 41
Disconnecting cables........................................................................ 42
Storage Media .............................................................................. 44
Replacement of the Hard Disk Drive ................................................ 44
Installing to a wall ........................................................................ 47
Preparation ...................................................................................... 49
Connecting the display ................................................................ 49
Mounting height .......................................................................... 50
Mounting location ....................................................................... 51
Installation ....................................................................................... 51
Fix wall mount back plate to the wall .......................................... 51
Fix wall mount front plate to the system .................................... 52
Secure the system to the wall ..................................................... 53
iPOS plus Port Extender................................................................ 54
P-USB Hub 9-ports ........................................................................ 56
Starting Up the System ................................................................. 57
Operating the RFID/NFC reader .................................................... 58
Powering Down the System ......................................................... 59
Error reporting ............................................................................. 60
Technical Data .............................................................................. 61
NFC Module ..................................................................................... 63
AC Power Adapter ............................................................................ 64
iPOS plus Port Extender (for Desktop stand) ................................... 65
iPOS plus Port Extender (Standalone) .............................................. 65
Power Budgeting .............................................................................. 66
Appendix ...................................................................................... 68
Approved Printers List ...................................................................... 68
Abbreviations ............................................................................... 69
BEETLE /iPOS plus User Manual 1
About This Manual
This documentation is intended to help you to work with the POS system
and to serve as a reference work. The detailed table of contents help you
find the desired information quickly and easily.
Notes in the manual are marked by this symbol.
This symbol is used for warnings.
The type and scope of application programs depend on the customer’s
own selection; therefore, software will not be discussed further in this
manual.
2 BEETLE /iPOS plus User Manual
Introduction
The BEETLE /iPOS plus comes in two variants, one with the Projected Ca-
pacitive and the other with Resistive touch.
Its key features are the bezel-free design with multi-touch capabilities and
the elegantly designed aluminum back housing coupled with its support
for the Celeron DC N3060 and the higher performance Pentium QC N3710
processors.
BEETLE /iPOS plus User Manual 3
Manufacturer´s Certification
The device complies with the requirements of the
EEC directive 2014/30/EU with regard to ‘Electro-
magnetic compatibility" and 2014/35/EU “Low
Voltage Directive” and RoHS directive 2011/65/EU.
Therefore, you will find the CE mark on the device or packaging.
In addition, the BEETLE /iPOS plus has received the UL
symbol and cUL symbol.
Europe-EU Declaration of Conformity
Hereby, Diebold Nixdorf declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
2014/53/EC.
Csěky [Czech]:
Dansk [Danish]:
Deutsch [German]:
Eesti [Estonian]:
English:
Español [Spanish]:
Ελληνική [Greek]:
4 BEETLE /iPOS plus User Manual
Français [French]:
Italiano [Italian]:
Latviski [Latvian]:
Lietuvių [Lithuanian]:
Nederlands [Dutch]:
Malti [Maltese]:
Magyar [Hungarian]:
Polski [Polish]:
Português [Portu-
guese]:
Slovensko [Slovenian]:
Slovensky [Slovak]:
Suomi [Finnish]:
Svenska [Swedish]:
Íslenska [Icelandic]:
Norsk [Norwegian]:
BEETLE /iPOS plus User Manual 5
The declaration of conformity may be consulted at
http://www.Dieboldnixdorf.com.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operat-
ed with minimum distance 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interfer-
ence that may cause undesired operation.
FCC-Class A Declaration
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his ex-
pense. Modifications not authorized by the manufacturer may void user’s
authority to operate this device.
CAN ICES-3 (A)/NMB-3(A).
6 BEETLE /iPOS plus User Manual
BSMI (EMC for Taiwan)
Energy Efficiency
iPOS plus is tested in an accredited test lab and can meet the Eligibility Crite-
ria for Integrated Desktop laid down in ENERGY STAR version 6.0 for Com-
puters. On a request basis, an application can be made to Energy Star for
listing.
The device complies with the requirements of the BSMI
(Bureau of Standards, Metrology and Inspection, Minis-
try of Economic Affairs) directive CNS13438 with regard
to “Electromagnetic compatibility” with the limits for a
Class B product.
BEETLE /iPOS plus User Manual 7
Supplier’s Declaration of Conformity
Product Description: POS Terminal
Model: BEETLE /iPOS plus
Party issuing Supplier’s Declaration of Conformity
Diebold Nixdorf Singapore PTE. LTD.
151 Lorong Chuan New Tech Park #05-01 A/B
Singapore 556741
Phone: +65 6747 3828
Responsible Party U.S. Contact Information
Diebold Nixdorf
5995 Mayfair Road
N. Canton, OH 44720 / USA
Phone: +1 330 490 5049
FCC Compliance Statement (for products subject to Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
8 BEETLE /iPOS plus User Manual
Care of the BEETLE /iPOS plus
Clean your system’s housing at regular intervals with a dry, lint-free cloth.
If this does not suffice please use a suitable plastic-surface cleaner which
you can order from Diebold Nixdorf.
For more information about cleaning read the chapter “Projective Capaci-
tive Touch Screen” and “Resistive Touch Screen”. When cleaning always
make sure that the power plug is disconnected and that no liquid finds its
way into the device.
BEETLE /iPOS plus User Manual 9
Recycling the BEETLE /iPOS plus
Environmental protection does not begin when the time has come to dis-
pose of the BEETLE; it begins with the manufacturer. This product was de-
signed according to our internal norm “Environmental conscious product
design and development”.
The BEETLE /iPOS plus system is manufactured without the use of CFC and
CHC and is produced mainly from reusable components and materials.
Please do not stick labels onto plastic case parts. This would help us to re-
use components and material.
But there are still some parts that are not reusable. Diebold Nixdorf guar-
antees the environmentally safe disposal of these parts in a Recycling Cen-
ter, which is certified pursuant to ISO 9001 and ISO 14001.
You can protect our environment by only switching on your equipment
when it is actually needed. If possible, even avoid the stand-by-mode as
this wastes energy, too. Also switch your equipment off when you take a
longer break or finish your work.
Please contact your competent branch or the Recycling Center Paderborn
(for European countries) for information on how to return and reuse de-
vices and disposable materials under the following mail address.
Email: info@Dieboldnixdorf.com or on the internet.
10 BEETLE /iPOS plus User Manual
Warranty
In general, damages due to
improper or insufficient maintenance,
improper use of the product or unauthorized modifications of the
product,
inadequate location or surroundings
Will not be covered by the warranty.
For further information on the stipulation consult your contract.
All parts of the product which are subject to wear and tear are not
included in the warranty engagement. For detailed warranty arrangements
please consult your contract documents.
Please order spare parts at the Diebold Nixdorf customer service.
Important Notes
Diebold Nixdorf is not responsible for any radio and television malfunctions
which emerge from unauthorized changes in the device. Make sure that
only cables and devices may be connected which are admitted by Diebold
Nixdorf. The user is responsible for any
malfunctions that emerge from the actions mentioned before.
The device may only be repaired by authorized qualified person-
nel. Unauthorized opening of the device and inexpertly carried-
out repairs may not only seriously jeopardize the safety of the
user, but also cancel all warranty and liability agreements.
Expansion cards with electrostatically sensitive devices (ESD) may
be marked with this sticker.
BEETLE /iPOS plus User Manual 11
When opening the device or handling modules fitted with ESD, please ob-
serve the following instructions, which pertain to all electrostatic sensitive
devices (ESDs):
Always use the antistatic kit.
Statically discharge yourself, for example by touching an earthed ob-
ject (such as a heat radiator) before beginning to work with ESD-
labeled components.
Likewise, all equipment and tools used in working with such compo-
nents must be free of static charge.
Pull the mains plug before inserting or removing such components.
Only handle such components by their edges.
Never touch any terminal pins of the strip conductors on such compo-
nents.
Safety Notes
The BEETLE /iPOS plus conforms to the current safety standards for data
processing equipment.
If this device is taken from a cold environment into the operating
room, moisture condensation may form. The device must be
absolutely dry before being put into service; an acclimatization
period of at least two hours must therefore be observed.
This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.
When setting up the device, ensure that the power socket on the
device and the grounded-contact power socket are easily accessible.
Whenever work of any kind is done on the device, as well as when
data cables are plugged and/or unplugged, the device must be com-
pletely disconnected from the line voltage. To do so, turn the device
off and unplug the power cord.
To disconnect the device from the supply voltage completely, switch
off the device and disconnect the power plug of the system.
Never plug in or unplug data communication lines during thunder-
storms.
12 BEETLE /iPOS plus User Manual
Protect devices from vibrations, dust, moisture and heat.
Always dispose of used parts, such as batteries, in an environmentally
safe manner.
In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched
off immediately, the power plug disconnected and the Customer
Service of Diebold Nixdorf or your dealer must be notified.
Your BEETLE system is the result of modern technical innovation. So
please see for according structural and technical surroundings to guar-
antee a faultless and efficient work of your BEETLE. Therefore, you
should connect your BEETLE or other IT-devices only to power supply
systems with separately guided protective earth conductor (PE). This
kind of electricity system is known as TN-S network. Do not use PEN
conductors!
Please also observe the recommendations of the norm DIN VDE 0100,
Part 540, Appendix C2 as well as EN50174-2, §5.4.3.Thus you can help
to avoid possible mal functions.
If you replace a storage medium, make sure that you only use the stor-
age medium recommended or approved by Diebold Nixdorf.
You can connect or disconnect USB devices during operation of your
BEETLE, provided that these devices comply with the specifications
according to usb.org. Other peripheral devices (such as PoweredUSB
printer) should be connected to or disconnected from your BEETLE
system only after the BEETLE has been switched off.
BEETLE /iPOS plus User Manual 13
Overview
Front View with Stand
1
Display
2
Stand
3
Brightness adjustment LEDs
4
Power status indicator
5
On/off button
14 BEETLE /iPOS plus User Manual
Back View with Stand
1
Stand
2
Base cover of stand
3
*Back cover of stand
4
Frame cover of stand
5
Side-attach peripheral connection cover
6
RAM/mini-PCIe cover
7
Side-attach peripheral connection cover
8
Cable connection cover
*Observe the safety precaution mentioned on the next page
when you remove the back cover of stand.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77

Diebold Nixdorf BEETLE /iPOS plus Manuale utente

Categoria
Parete
Tipo
Manuale utente
Questo manuale è adatto anche per