High End Systems TechnoArc Manuale utente

intellaspot™

User Manual

Information and specifications in this document

are subject to change without notice. High End Systems, Inc.

assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual.

Trademarks used in this text:

High End Systems, Wholehog, Dataflash, and Lithopatterns are regis

ter

ed trademarks: and intellaspot, Internal

Effects, the High End Systems globe logo, Light Burst, Electronic Dimming, and the Hog logo are trademarks of

Hig

h End Systems, Inc. or High End Systems Europe Ltd. Hog is a registered trademark of Flying Pig Systems.

Belden is a registered trademark of Belden, Inc.

Other tradem

arks and trade names may be used in t

his docu

ment to refer to either the entities claiming the

marks and names or their products. High End Systems disclaims any proprietary interest in trademarks and

trade names owned by others.

in

tellaspot™ User Manual

August, 2012

ii intellaspot

TM

User Manual

Contact Information

U.S. and the Americas

Sales Department H

igh End Systems, Inc.

2105 Gracy Farms Lane

Austin, TX 78758 USA

voice: 512.836.2242

fax: 512.837.5290

Toll Free: 800.890.8989

Customer Service H

igh End Systems, Inc.

2105 Gracy Farms Lane

Austin, TX 78758 USA

voice: 800.890.8989

fax: 512.834.9195

toll free: 800.890.8989

World Wide Web: ht

tp://www.highend.com

intellaspot

TM

User Manual iii

Declaration of Conformity

according to ISO/IEC Guide 22 and EN45104

Manufacturer’s name: Barco Lighting Systems

Manufacturer’s address: 2105 Gr

acy Farms Lane

Austin, Texas 78758 USA

Distributor’s name: Hi

gh End Systems, Inc.

Distributor’s address: 2105 Gracy Farms Lane

Austin, Texas 78758 USA

Product Name: inte

ll

aspot

Product Options: All

We

hereby declare that the above referenced product

complies withthe essential

requirements of Council Directives 2004/108/EC (EMC) and 2006/95/EC (LVD).

Equipment referred to in this declaration of conformity was manufactured in

comp

liance with the following standards beginning in 1995:

Safety: EN 60598-1 : 2004

EN 60

598-2-17: 1989

A1-A3 : 1993

EMC: Emission: EN 55022 Ed.2 (1998) + A1 (2000) + A2(2003)

EN 61

000-3-2 (2000) + A2(2005)

EN 61000-3-3 (1995) + A1 (2001) + A2(2005)

Immunity: EN 55024 Ed.1 (1998) + A1 (2001) + A2(2003)

USA, Wednesday, August 15, 2012

Kenneth Stuart Hansen, Compliance Engineer

iv intellaspot

TM

User Manual

Product Modification Warning

High End Systems products are designed and manufactured to meet the requirements of United States and

International safety regulations. Modifications to the product could affect safety and render the product non-

compliant to relevant safety standards.

Mise En Garde Contre La Modification Du Produit

Les produits High End Systems sont conçus et fabriqués conformément aux exigences des règlements

inte

rnationaux de sécurité. Toute modification du produit peut entraîner sa non conformité aux normes de

sécurité en vigueur.

Produktmodifikationswarnung

Design und Herstellung von High End Systems entsprechen den Anforderungen der U.S. Amerikanischen und

inte

rnationalen Sicherheitsvorschriften. Abänderungen dieses Produktes können dessen Sicherheit

beeinträchtigen und unter Umständen gegen die diesbezüglichen Sicherheitsnormen verstoßen.

Avvertenza Sulla Modifica Del Prodotto

I prodotti di High End Systems sono stati progettati e fabbricati per soddisfare i requisiti delle normative di

sicu

rezza statunitensi ed internazionali. Qualsiasi modifica al prodotto potrebbe pregiudicare la sicurezza e

rendere il prodotto non conforme agli standard di sicurezza pertinenti.

Advertencia De Modificación Del Producto

Los productos de High End Systems están diseñados y fabricados para cumplir los requisitos de las

re

glamentaciones de seguridad de los Estados Unidos e internacionales. Las modificaciones al producto podrían

afectar la seguridad y dejar al producto fuera de conformidad con las normas de seguridad relevantes.

Important Safety Information

Instructions pertaining to continued protection against fire, electric shock, and injury to persons are

found in Appendix B: Important Safety Information on page 77. Please read all instructions prior to

assembling, mounting, and operating this equipment.

Important: Informations De Sécurité

Les instructions se rapportant à la protection permanente contre les incendies, l’électrocution, excessif

et aux blessures corporelles se trouvent dans l’Annexe B. Veuillez lire toutes les instructions avant

d’assembler, de monter ou d’utiliser cet équipement.

Wichtige Sicherheitshinweise

Sicherheitsanleitungen zum Schutz gegen Feuer, elektrischen Schlag, und Verletzung von Personen

finden Sie in Anhang B. Vor der Montage, dem Zusammenbau und der Intbetriebnahme dieses Geräts

alle Anleitungen sorgfältig durchlesen.

Informazioni Importanti Di Sicurezza

Le istruzioni sulla protezione da incendi, folgorazione, e infortuni sono contenute nell’appendice B. Si

prega di leggere tutte le istruzioni prima di assemblare, montare e azionare l’apparecchiatura.

Informacion Importante De Seguridad

En el Apéndice B se encuentran instrucciones sobre protección continua contra incendios, descarga

eléctrica, y lesiones personales. Lea, por favor, todas las instrucciones antes del ensamblaje, montaje y

operación de este equipo.

intellaspot

TM

User Manual v

FCC Information

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause

harmful interference, in which case the user will be required to correct the interference at his own expense.

Safety Symbols

The following international caution and warning symbols appear in margins throughout this manual to highlight

messages.

This symbol appears adjacent to Caution messages.

Not heeding these messages could result in personal

injury and/or damage to equipment.

This symbol appears adjacent to high voltage warning

messages. Not heeding these messages could result in

serious personal injury.

This symbol indicates the minimum focus distance

from a combustible object.

This symbol cautions against mounting the fixture on

or near a flammable surface.

This symbol indicates an explosion hazard.

UV

This symbol cautions against an Ultraviolet Radiation

hazard.

This symbol indicates that eye protection should be

worn to prevent potential injury.

This symbol indicates that, while operating, equipment

surfaces may reach very high temperatures. Allow the

fixture to cool before handling.

2 m

vi intellaspot

TM

User Manual

Warranty Information

Limited Warranty

Unless otherwise stated, your product is covered by a one year parts and labor limited warranty. Dichroic filters

and LithoPatterns

®

high resolution glass gobos are not guaranteed against breakage or scratches to coating. It

is the owner’s responsibility to furnish receipts or invoices for verification of purchase, date, and dealer or

distributor. If purchase date cannot be provided, date of manufacture will be used to determine warranty

period.

Returning an Item Under Warranty for Repair

It is necessary to obtain a Return Material Authorization (RMA) number from your dealer or point of purchase

BEFORE any units are returned for repair. The manufacturer will make the final determination as to whether or

not the unit is covered by warranty. Lamps are covered by the lamp manufacturer’s warranty.

A fixture must be returned in its original packaging. Any other parts returned to High End Systems must be

pack

aged in a suitable manner to ensure the protection of such product unit or parts, and such package shall be

clearly and prominently marked to indicate that the package contains returned Product units or parts and with

an RMA number. Accompany all returned Product units or parts with a written explanation of the alleged

problem or malfunction. Ship returned Product units or parts to: 2105 Gracy Farms Lane, Austin, TX 78758

USA.

Note: Freight Damage Claims are invalid for fixtures shipped in non-factory

boxes and packing materials.

Freight

All shipping will be paid by the purchaser. Items under warranty shall have return shipping paid by the

manufacturer only in the Continental United States. Under no circumstances will freight collect shipments be

accepted. Prepaid shipping does not include rush expediting such as air freight. Air freight can be sent

customer collect in the Continental United States.

REPAIR OR REPLACEMENT AS PROVIDED FOR UNDER THIS W

ARRANTY IS THE EXCLUSIVE REMEDY OF THE

CONSUMER. HIGH END SYSTEMS, INC. MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO

ANY PRODUCT, AND HIGH END SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. HIGH END SHALL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR

CONSEQUENTIAL DAMAGE, INCLUDING LOST PROFITS, SUSTAINED OR INCURRED IN CONNECTION WITH ANY

PRODUCT OR CAUSED BY PRODUCT DEFECTS OR THE PARTIAL OR TOTAL FAILURE OF ANY PRODUCT

REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT

LIABILITY OR OTHERWISE, AND WHETHER OR NOT SUCH DAMAGE WAS FORESEEN OR UNFORESEEN.

Warranty is void if the product is mis

used, damaged, modified in any way, or for unauthorized repairs or parts.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

intellaspot

TM

User Manual vii

Patents

This product may use one or more of the following patents: US 4,392,187; US 4,602,321; US 4,688,161;

US 4,701,833; US 4,709,311; US 4,779,176; US 4,800,474; US 4,962,687; US 4,972,306; US 4,980,806;

US 5,010,459; US 5,031,078; US 5,073,847; US 5,078,039; US 5,186,536; US 5,209,560; US 5,278,742;

US 5,282,121; US 5,307,295; US 5,329,431; US 5,331,822; US 5,367,444; US 5,402,326; US 5,414,328;

US 5,426,576; US 5,430,629; US 5,432,691; US 5,454,477; US 5,455,748; US 5,502,627; US 5,506,762;

US 5,515,254; US 5,537,303; US 5,545,951; US 5,588,021; US 5,590,954; US 5,590,955; US 5,640,061;

US 5,647,662; US 5,691,886; US 5,702,082; US 5,728,994; US 5,758,955; US 5,758,956; US 5,769,527;

US 5,769,531; US 5,774,273; US 5,788,365; US 5,794,881; US 5,795,058; US 5,798,619; US 5,806,951;

US 5,812,596; US 5,823,661; US 5,825,548; US 5,828,485; US 5,829,868; US 5,857,768; US 5,882,107;

US 5,921,659; US 5,934,794; US 5,940,204; US 5,945,786; US 5,953,151; US 5,953,152; US 5,969,485;

US

5,980,066; US 5,983,280; US 5,984,248; US 5,986,201; US 6,011,662; US 6,029,122; US 6,048,080;

US 6,048,081; US 6,054,816; US 6,057,958; US 6,062,706; US 6,079,853; US 6,126,288; US 6,142,652;

US 6,142,653; US 6,172,822; US 6,175,771; US 6,188,933; US 6,208,087; US 6,219,093; US 6,220,730;

US 6,241,366; US 6,249,091; US 6,255,787; US 6,256,136; US 6,261,636; US 6,278,542; US 6,278,545;

US 6,278,563; US 6,288,828; US 6,326,741; US 6,327,103; US 6,331,756; US 6,346,783; US 6,421,165;

US 6,430,934; US 6,459,217; US 6,466,357; US 6,502,961; US 6,515,435; US 6,523,353; US 6,536,922;

US 6,538,797; US 6,545,586; US 6,549,324; US 6,549,326; US 6,563,520; US 6,565,941; US 6,570,348;

US 6,575,577; US 6,578,991; US 6,588,944; US 6,592,480; US 6,597,132; US 6,600,270; US 6,601,974;

US 6,605,907; US 6,617,792; US 6,621,239; US 6,622,053; US 6,635,999; US 6,648,286; US 6,664,745;

US 6,682,031; US 6,693,392; US 6,696,101; US 6,719,433; US

6,736,528; US 6,771,411; US 6,775,991;

US 6,783,251; US 6,801,353; US 6,812,653; US 6,823,119; US 6,865,008; US 6,866,390; US 6,866,402;

US 6,866,451; US 6,869,193; US 6,891,656; US 6,894,443; US 6,919,916; US 6,930,456; US 6,934,071;

US 6,937,338; US 6,955,435; US 6,969,960; US 6,971,764; US 6,982,529; US 6,988,805; US 6,988,807;

US 6,988,817; US 7,000,417; US 7,011,429; US 7,018,047; US 7,020,370; US 7,033,028; US 7,048,838;

US 7,055,963; US 7,055,964; US 7,057,797; US 7,073,910; US 7,078,869; US 7,092,098; US 7,119,902;

US 7,161,562; US 7,175,317; US 7,181,112; US 7,206,023; US 7,210,798; US D347,113; US D350,408;

US D359,574; US D360,404; US D365,165; US D366,712; US D370,080; US D372,550; US D374,439;

US D377,338; US D381,740; US D409,771; AT E169413; CA 2142619; CA 2145508; CA 2245842;

DE 22588.4-08; DE 621495; DE 655144; DE 69320175.4; DE 69322401.0; DE 69331145.2; DE 69525856.7;

DE 69734744.3; DE 797503; DK 0655144; DK

1447702; EP 0475082; EP 0621495; EP 0655144; EP 0662275;

EP 0767398; EP 0797503; EP 0969247; EP 1447702; ES 0621495; FR 0621495; FR 0655144; FR 0662275;

FR 1447702; GB 2043769B; GB 2055842B; GB 2283808B; GB 2290134B; GB 2291814B; GB 2292530B;

GB 2292896B; GB 2294909B; GB 2295058B; GB 2303203B; GB 2306887B; GB 2307036B; GB 2316477B;

IE 0621495; IT 034244BE; 2005; IT 0621495; IT 0655144; JP 3495373; JP 3793577; NL 0621495;

NL 0797503; NL 0969247; UK 0621495; UK 0655144; UK 0662275; UK 0797503; UK 0969247; UK 1447702;

viii intellaspot

TM

User Manual

intellaspot

TM

User Manual ix

Table of Contents

intellaspot™ User Manual ............................................................................... i

Contact Information ...................................................................................... ii

Declaration of Conformity ............................................................................ iii

Product Modification Warning ........................................................................ iv

Important Safety Information ........................................................................ iv

FCC Information ........................................................................................... v

Safety Symbols ............................................................................................ v

Warranty Information ................................................................................... vi

Limited Warranty ...................................................................................... vi

Returning an Item Under Warranty for Repair ............................................... vi

Freight .................................................................................................... vi

Patents ......................................................................................................vii

Chapter 1: Product Overview

This chapter describes the features and specifications of the intellaspot™ fixture

along with a list of related products and accessories.

Features ........................................................................................................ 1

Operation ....................................................................................................1

Optics ......................................................................................................... 2

Effects ........................................................................................................ 2

Construction ................................................................................................ 2

Specifications ................................................................................................ 3

Mechanical Specifications ............................................................................... 3

Wheel Components .......................................................................................4

Electrical/Light Source Specifications ...............................................................4

Environmental Specifications ..........................................................................4

Compliance .................................................................................................. 4

Cables and Connectors ..................................................................................5

Related Products and Accessories ................................................................. 5

Chapter 2: Setup and Configuration

Installation of your intellaspot fixture includes mounting, connecting to power and

DMX linking and configuration.

Unpacking the Fixture ................................................................................... 7

Pan and Tilt Locking ......................................................................................7

x intellaspot

TM

User Manual

Installing a Power Cord Cap .......................................................................... 8

Installing a Line Cord Cap - U.K. Only ............................................................. 8

Vatic Fitter Heads Information - Danmark ........................................................ 8

Mounting the Fixture ..................................................................................... 9

Mounting the Fixture Upright .......................................................................... 9

Truss Mounting .......................................................................................... 10

Side Mounting and Angular Mount by Moving Truss ...................................... 10

Linking intellaspot Fixtures ........................................................................ 11

Cable Connectors ....................................................................................... 11

Connecting to the Link ................................................................................ 12

Powering On the Fixture ............................................................................. 12

Setting the DMX Start Channel .................................................................... 13

Setting a Start Channel in Battery Mode ........................................................ 14

Setting a Start Channel in Normal Mode ....................................................... 14

Shutting Down the Fixture .......................................................................... 15

Placing Fixture in Road Case ........................................................................ 15

Chapter 3: Menu System

This chapter shows you how to access and navigate the onboard Menu system and the

options available at each menu level with examples.

Menu System Components .......................................................................... 17

Menu Screen ............................................................................................. 17

Connection Options .................................................................................. 17

Navigation Buttons ..................................................................................... 18

Battery Mode ............................................................................................. 18

Navigation Basics ....................................................................................... 18

Display in Menu Locked Mode ....................................................................... 19

Fixture Software Version .......................................................................... 19

DMX Start Channel .................................................................................. 19

Error Message Display .............................................................................. 19

Unlocking the Menu System ......................................................................... 19

Exiting the Menu System ............................................................................. 19

intellaspot™ Menu Map .............................................................................. 20

Menu System Options ................................................................................. 25

Address Menu ............................................................................................ 25

Setting a Start Channel in Battery Mode ..................................................... 25

Setting a Start Channel in Normal Mode .................................................... 25

Determining DMX Start Channel Assignment ............................................... 26

intellaspot

TM

User Manual xi

Set Parameters Menu .................................................................................. 27

Factory Default Settings ........................................................................... 27

Pan/Tilt Swap ......................................................................................... 28

Pan Invert .............................................................................................. 28

Tilt Invert ............................................................................................... 28

Lamp Life Limit ....................................................................................... 29

Lamp Level ............................................................................................. 29

Data Loss Timeout ................................................................................... 29

Lamp Strike Mode .................................................................................... 30

Data Source ............................................................................................ 30

Fixture Mode Menu .................................................................................... 31

Crossloading Fixture Software ................................................................... 31

Test Options Menu ..................................................................................... 32

Homing the Fixture .................................................................................. 32

Lamp State ............................................................................................. 32

Copying the Boot Code ............................................................................. 33

Self Test ................................................................................................ 33

Display Test ............................................................................................ 33

Setup Motors ......................................................................................... 34

Encoders ................................................................................................ 34

Code Menu ............................................................................................. 34

Information Menu ...................................................................................... 35

Sensor Status Menu ................................................................................. 35

Unique Number ....................................................................................... 35

DMX Values Menu .................................................................................... 36

Temperatures Menu ................................................................................. 37

Fan Speed Menu ...................................................................................... 38

Fixture Hours .......................................................................................... 38

Fixture Hours Reset ................................................................................. 38

Lamp Hours ............................................................................................ 38

Lamp Strikes .......................................................................................... 39

Lamp HR/Strike Reset .............................................................................. 39

Lamp Status ........................................................................................... 39

Display Errors Menu ................................................................................. 39

Software Version ..................................................................................... 40

Module Versions Menu .............................................................................. 40

Channels Needed ..................................................................................... 40

Next DMX Channel ................................................................................... 40

xii intellaspot

TM

User Manual

Chapter 4: Fixture Programming

intellaspot™ fixtures can be programmed to provide hard edge beam with full CMY

color, multiple gobo patterns and effects, as well as a variety of Shutter/Lamp

functions. This chapter discusses the DMX programming options and describes the

intellaspot DMX parameters in both the standard and enhanced protocols.

DMX Programming Overview ...................................................................... 41

Full Speed verses MSpeed Control ................................................................ 41

16-bit Functionality ..................................................................................... 41

DMX Programming Options .......................................................................... 41

Programming with a DMX Console ................................................................ 41

intellaspot DMX Protocol ............................................................................. 42

Pan and Tilt Parameters .............................................................................. 42

Color Parameters ........................................................................................ 43

Color Mix Function ...................................................................................... 43

Cyan, Magenta, and Yellow .......................................................................... 44

CTO .......................................................................................................... 44

Static Color Function ................................................................................... 45

Static Color Position .................................................................................... 45

Gobo Wheel Parameters .............................................................................. 46

Gobo Function ............................................................................................ 47

Gobo Position ............................................................................................. 47

Gobo Rotate Function .................................................................................. 47

Gobo Rotate .............................................................................................. 48

Effect Parameters ....................................................................................... 49

Effect Function ........................................................................................... 49

Effect Rotate .............................................................................................. 49

Animation Wheel Parameters ...................................................................... 50

Animation Function ..................................................................................... 50

Animation Rotate ........................................................................................ 50

Soft Edge Parameter ................................................................................... 51

Focus Parameters ....................................................................................... 52

Focus Function ........................................................................................... 52

Focus ........................................................................................................ 52

Zoom Parameter ......................................................................................... 52

Iris Parameter ............................................................................................ 52

intellaspot

TM

User Manual xiii

Shutter and Lamp Parameters .................................................................... 53

Shutter/Lamp Function ................................................................................ 53

Shutter ..................................................................................................... 53

Dim .......................................................................................................... 54

MSpeed (Motor Speed) ................................................................................ 55

Macro .......................................................................................................... 56

Control Parameter ....................................................................................... 57

Indigo Highlighter ....................................................................................... 58

Indigo Highlighter Function .......................................................................... 58

Indigo Highlighter Dim ................................................................................ 58

Chapter 5: General Maintenance and Troubleshooting

Maintaining and servicing intellaspot fixtures includes replacing parts and cleaning

the unit. General troubleshooting tips help you identify potential problems.

Replacing Parts ........................................................................................... 60

Replacing Fuses .......................................................................................... 60

Replacing Display Batteries .......................................................................... 61

Replacing the Lamp .................................................................................... 61

Optimizing the Lamp ................................................................................ 63

Replacing Interchangeable Motor Driver Boards .............................................. 64

Locating 2-Phase Motor Driver Boards ........................................................ 64

2-Phase Board Configuration ..................................................................... 65

3-Phase Board Location and Configuration .................................................. 66

Replacing a Motor Driver Board ................................................................. 67

Replacing Static Color Wheel Dichroic Wedges ................................................ 68

Replacing intellaspot Lithopatterns® ............................................................. 70

Replacing the Animation Wheel ..................................................................... 71

Cleaning the Fixture .................................................................................... 72

Lenses, Dichroics and Lithos ........................................................................ 72

Filters ....................................................................................................... 72

Troubleshooting .......................................................................................... 73

System State LEDs ..................................................................................... 73

Board LED States ....................................................................................... 73

Appendix A: MSpeed Conversion Table...............................................75

xiv intellaspot

TM

User Manual

Appendix B: Important Safety Information........................................ 77

Appendice B: Importantes Informations Sur La Sécurité .................................. 79

Anhang B: Wichtige Hinweise Für Ihre Sicherheit ............................................ 80

Apéndice B: Información Importante De Seguridad ......................................... 81

Appendice B: Importanti Informazion

i Di Sicurezza ......................................... 82

Vigtig Sikkerhedsinformation ........................................................................ 83

CHAPTER 1

Product Overview

intellaspot

TM

User Manual 1

Chapter 1:

Product Overview

This chapter describes the features and specifications of the intellaspot™

fixture along with a list of related products and accessories.

The intellaspot is a hard-edged moving yoke light featuring smooth

CMY color mixing and with

variable CTO. A fixed color wheel allows instant color choices via easily exchangeable dichroic

filters. Two rotating Lithopattern® wheels, each with seven patterns plus open, provide a large

number of output patterns and images. The output is further enhanced with a rotating prism

and an animation wheel.

The intellaspot optical system produces a 20,

000 lumen output from the 850w HID lamp, while

providing clear projections with a large zoom range of 11° to 55°. The fixture also features a

fast mechanical iris, variable soft edge, and electronic strobing.

Built on an entirely new platform,

the intellaspot combines new technologies to create an

energy-efficient fixture that conforms to modern “greening” principles. A battery-controlled full

color LCD menu system enables fixture addressing without having to power up the unit. Low

ambient noise, RDM, Art-Net, and wireless DMX capabilities make the intellaspot the

professional choice for a wide variety of applications.

Features

Operation

• 540° pan and 270° tilt movement

• Auto-ranging 100-240V 50/60 Hz

• High efficiency 20,000-lumen output

• 850w HID lamp - 750 hrs.

• Onboard menu system with Color LCD display

• Battery powered addressing option

• 39 DMX channels

• Internal Effects™ macro control option

• DMX/RDM Connector; 5-pin XLR

•RDM compatible

• Optional Art-Net

• Optional wireless DMX

•Low ambient noise

CHAPTER 1

Product Overview

2 intellaspot

TM

User Manual

Optics

• 5:1 Zoom 11° – 55°

• Mechanical and Electronic strobe

• Variable soft edge

• Fast mechanical iris

Effects

• CMY color mixing plus variable CTO

• Color wheel with replaceable positions

• Two seven position plus open rotating gobo wheels

• Rotating prism

• Animation wheel

• Indigo Highlighter

Construction

• Modular construction

• Fast service design for all components

• Electronic cooling system control

• Fast, smooth and quiet yoke movement using proprietary multi-phase technology

• Performance oriented exterior design prevents stray light scatter

• Pan and tilt locks for easy transportation

• Easily carried with yoke-arm handles

• Optional touring roadcase

CHAPTER 1

Product Overview

intellaspot

TM

User Manual 3

Specifications

Mechanical Specifications

Dimensions: 381 mm x 551 mm x 909 mm (15 in x 21.7 in x 35.7 in)

Shipping Box Dimensions: 597 mm x 610 mm x 1124 mm (23.5 x 24 x 44.25)

Fixture weight: 52.17 kg (115 lbs)

668 mm

(26.3 in)

317 mm

(12.5 in)

254 mm

(10.0 in)

909 mm

(35.7 in)

447 mm (17.6 in)

156 mm

(6.1 in)

551 mm (21.7 in)

572 mm

(22.5 in)

731 mm

28.8 in

381 mm (15 in)

538 mm (21.2 in)

377 mm (14.8 in)

CHAPTER 1

Product Overview

4 intellaspot

TM

User Manual

Wheel Components

Animation Wheel: Diameter: 127.0 mm ± .25 mm (5.0 in ± .10 in)

Thickness: 1.75 mm ± .25 mm (.69 in ± .008 in)

Maximum image area: 44 mm ± 0.425 mm (1.75 in ± .01 in)

Lithopatterns: Diameter: 36.8 mm ± .25 mm (1.45in ± .008in)

Image Area: 30 mm ± 0.425 mm (1.18 in ± .01 in)

Note: Metal Gobos are not recommended for use in intellespot

fixtures.

Electrical/Light Source Specifications

Fixture Rated Power: 1200 W

Power consumption: 12 Amps at 100V, 5 Amps at 240V

Rated frequency: 50-60Hz

Lamp: 850W HID

Color Temperature: 7000 K

Rated Lamp Life: 750 hrs

Fixture Output: 20,000 lumens

Environmental Specifications

Maximum ambient temperature: 50° C (122° F)

Maximum exterior surface temperature: 95° C (203° F)

Minimum distance to lighted object: 2 m (7.8 ft)

Minimum distance to flammable objects: 2 m (7.8 ft)

Compliance

Warning: Class I equipment - For continued protection

against electric shock connect this equipment to an

earthed (grounded) power source only.

This equipment for connection to branch circuit

having a maximum overload protection of 20 A.

Caution: Do not mount on a flammable surface.

Not for residential use.

Use in dry locations only.

CHAPTER 1

Product Overview

intellaspot

TM

User Manual 5

Cables and Connectors

Belden

®

3107A or equivalent (meets specifications for EIA RS-485 applications) with the

following characteristics:

• Two twisted pairs plus a shield

• maximum capacitance between conductors - 30 pF/ft.

• maximum capacitance between conductor and shield - 55 pF/ft.

• maximum resistance of 20Ω / 1000 ft.

• nominal impedance 100-140Ω

High End Systems TechnoArc Manuale utente

Questo manuale è adatto anche per

High End Systems TechnoArc Manuale utente

in altre lingue

Documenti correlati

Altri documenti