Thermo Fisher Scientific Smart-Vue Pro Duo and Quatro Guida utente

Marca: Thermo Fisher Scientific

Modello: Smart-Vue Pro Duo and Quatro

Tipo: Guida utente

User Guide

331676H05 • Revision C • 1/17/2022

Smart-Vue Pro Duo/Quatro

IMPORTANT Read this instruction manual. Failure to follow the instructions in this manual can result in

damage to the unit, injury to operating personnel, and poor equipment performance.

CAUTION All internal adjustments and maintenance must be performed by qualified service personnel.

Material in this manual is for informational purposes only. The contents and the product it describes are

subject to change without notice. Thermo Fisher Scientific makes no representations or warranties with

respect to this manual. In no event shall Thermo be held liable for any damages, direct or incidental, arising

from or related to the use of this manual.

Contents

Models ........................................................................ 1

Safety Notices ............................................................. 2

Device Maintenance ................................................ 3

Regulatory Information ................................................ 4

Certifications and Compliance ................................. 4

Introduction ................................................................ 6

About this User Guide ............................................. 6

Intended Use ........................................................... 7

Smart-Vue Pro Solution Overview ............................ 7

Hardware Overview ................................................. 10

Package Contents ................................................... 12

Technical Specifications .............................................. 13

Characteristics ........................................................ 13

Dimensions ............................................................. 15

Power Options ........................................................ 16

Getting Started ........................................................... 17

Prerequisites for Getting Started .............................. 17

Attach Antenna ....................................................... 17

Activating the Smart-Vue Pro Duo/Quatro

Data Logger for LoRaWAN ...................................... 17

Installing the Smart-Vue Pro Duo/Quatro

Data Logger ................................................................ 20

Optimizing Wireless Performance ............................ 20

Preparing the Mounting Kit ...................................... 20

Using External Sensors ............................................... 22

Pt100 Smart-Sensors .............................................. 22

Digital Temperature Sensors ................................... 24

Temperature/Humidity Smart-Sensors™ ................. 26

Dry Contact Input Sensor ........................................ 26

4-20 mA and 0-5 V Loop Sensors ........................... 30

Smart-Vue Pro Duo / Quatro User Interface ................ 31

Using the Touchscreen ........................................... 31

Entering your PIN Code ........................................... 31

Sensor Display and Control ..................................... 32

Screen Backlight ..................................................... 35

Screen Saver .......................................................... 35

Configuration Menus ................................................... 36

Settings ................................................................... 39

Sensors ................................................................... 41

Advanced Menu ...................................................... 42

LoRaWAN Radio Performance ................................ 44

Quick Server Connection Test ................................. 44

Data Synchronization .............................................. 45

Using the Data Logger in Bluetooth-only Mode ....... 45

Alarm Management ..................................................... 46

LED Status Indications ............................................ 46

Alarm Actions .......................................................... 47

Maintaining your Data Loggers .................................... 49

Replacing Batteries ................................................. 49

Cleaning Instructions ............................................... 50

Appendix 1 – Smart-Vue Pro Duo/Quatro

Battery Life ................................................................. 51

Estimated Battery Life ............................................. 51

Appendix 2 - Troubleshooting ..................................... 52

WEEE Compliance ...................................................... 53

Contact Information .................................................... 54

Smart-Vue Pro Duo / Quatro User Guide Models | 1

Models

Models in the below table shows the modules covered in this manual.

Note: Smart-Vue Pro Duo/Quatro below part numbers transition shall be effective from 20 December 2021.

Table 1. Transition Part Number Details

Initial Part Number Initial Part Number

Description New Part Number New Part Number Description

(915MHz – US, 868MHz-EU)

SVPHWRMOD002 Smart-Vue Pro Duo SVPHWRMOD012 Smart-Vue Pro Duo 915MHz

SVPHWRMOD002 Smart-Vue Pro Duo SVPHWRMOD022 Smart-Vue Pro Duo 868MHz

SVPHWRMOD004 Smart-Vue Pro Quatro SVPHWRMOD014 Smart-Vue Pro Quatro 915MHz

SVPHWRMOD004 Smart-Vue Pro Quatro SVPHWRMOD024 Smart-Vue Pro Quatro 868MHz

2 | Safety Notices Smart-Vue Pro Duo / Quatro User Guide

Safety Notices

IMPORTANT NOTE: Do not use this product for protection

or as part of an automated emergency system or as for any

other application that involves protecting people and/or

property. This product is designed for use in environments

where children are not likely to be present. Customers and

users of Thermo Scientific products are responsible for

making sure that the product is fit for the intended usage.

Do not open the product casing and do not disassemble or

modify internal components in any manner. Thermo Scientific

products do not contain any internal components that require

user intervention or repair. If the device shows signs of

improper operation, disconnect it immediately from its power

source or remove the battery and contact Thermo Scientific

technical services.

Electrical Warning

CAUTION: To reduce the risk of electric shock,

do not open or remove the product casing.

No user-serviceable parts inside. Refer servicing

to qualified service personnel.

The lightning flash with arrowhead symbol is

intended to alert the user to the presence of

uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

a person.

Battery Warning

CAUTION: This product contains two

non-rechargeable 3.6V lithium batteries.

Plugging the device into the AC adapter (USB)

does not recharge the batteries. Ensure you

respect polarity (+/-) as indicated inside the

battery compartment while inserting batteries into

Thermo Scientific devices. Reversing polarity by

inserting the batteries incorrectly can cause the

product to heat up and may lead to battery liquid

leakage. Use only batteries recommended by

Thermo Scientific. Do not use a different type of

battery such as rechargeable, alkaline and

magnesium or use batteries of different brands or

even different types of batteries of the same

brand. Never dispose of batteries in fire. Do not

charge regular batteries that are not specifically

rechargeable. When the battery is low or in case

the battery-operated device in question remains

unused for a lengthy period of time remove the

battery from the device in order to avoid any risk

of battery liquid leakage. Never leave batteries

within the reach of children. In case of a battery

leak, avoid all contact with the liquid present on

the batteries. Rinse with clear water immediately

in case the battery liquid comes into contact with

the eyes, mouth or skin. Contact a doctor or

emergency service immediately. Battery liquid is

corrosive and can damage vision or cause

blindness or chemical burns.

Smart-Vue Pro Duo / Quatro User Guide Safety Notices | 3

Device Maintenance

When maintaining your device:

CAUTION: Do not attempt to disassemble the

device. There are no user serviceable parts

inside.

CAUTION: Do not misuse the device.

Follow instructions on proper operation and only

use as intended. Misuse could make the device

inoperable, damage the device and/or other

equipment or harm users.

CAUTION: Do not apply excessive pressure or

place unnecessary weight on the device.

This could result in damage to the device or harm

to users.

CAUTION: Do not use this device in explosive or

hazardous environments.

CAUTION: Do not expose your device to any

extreme environment where the temperature or

humidity is high. Such exposure could result in

damage to the device or fire.

CAUTION: Do not expose the device to water,

rain, or spilled beverages. It is not waterproof.

Exposure to liquids could result in damage to the

device.

CAUTION: Do not place the device alongside

computer discs, credit or travel cards or other

magnetic media. The information contained on

discs or cards may be affected by the device.

CAUTION: Using accessories, such as

antennas, that Thermofisher has not authorized

or that are not compliant with Thermofisher

accessory specifications may invalidate the

warranty.

4 | Regulatory Information Smart-Vue Pro Duo / Quatro User Guide

Regulatory Information

Certifications and

Compliance

This paragraph pertains to 915 MHz Smart-Vue Pro™

wireless devices. This device complies with part 15 of the

FCC rules.

Operation is subject to the following two conditions.

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired

operation.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment. In order to avoid the

possibility of exceeding the FCC radio frequency exposure

limits, human proximity to the antenna should not be less than

20 cm (8 inches) during normal operation. End users must

follow the specific operating instructions for satisfying RF

exposure compliance. This transmitter must not be

co-located or operating in conjunction with any other antenna

or transmitter.

47 CFR Part 15 Regulation Class B Devices

Note: This Equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to part 15

of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician

for help.

This paragraph pertains to 915 MHz Smart-Vue Pro wireless

devices. This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to the following

two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including

interference that may cause undesired operation of the

device.

Under Industry Canada regulations, this radio transmitter

may only operate using an antenna of a type and

maximum (or lesser) gain approved for the transmitter by

Industry Canada. To reduce potential radio interference to

other users, the antenna type and its gain should be so

chosen that the equivalent isotropically radiated power

(e.i.r.p.) is not more than that necessary for successful

communication.

FCC statements

IC Statements

Smart-Vue Pro Duo / Quatro User Guide Regulatory Information | 5

This paragraph pertains to 868 MHz Smart-Vue Pro™

wireless devices. The Thermo Scientific product is compliant

with the essential requirements and other relevant

requirements of the following standards and/or normative

documents.

• Directives:

• 2014/53/EU Radio Equipment Directive (RED)

• 2014/30/EU EMC Directive

• 2014/35/EU Low Voltage Directive

• 2011/65/EU and the amendment of (EU) 2015/863

Restriction of Hazardous Substances Directive.

• In application of the following standards

• ETSI EN 300 220-2 V3.1.1

• EN 301 489-1 V2. 2.3

• EN 301 489-3: V2.1.1

• EN 301 489-17 V3. 2.4

• EN 300 328 V2. 2.2

• CAN/CSA-C22.2 No. 61010-1-12/A1:2018-11

UL 61010-1:2012/R:2019-07

• EN 61010-1:2010/A1:2019

IEC 61010-1:2010/A1:2016

• EN 61326-1:2013

CE - Conformity with European regulations

CAUTION: Any changes or modifications not

expressly approved by Thermo Scientific could

void the user's authority to operate the

equipment.

The wireless device is in compliance with the EU

Directive 2011/65/EU (Restriction of the Use of

Certain Hazardous Substances in Electronic and

Electrical Equipment) and the amendment of (EU)

2015/863. Do not dispose of this product with

household trash. Thermo Scientific recycles this

product under certain conditions. Contact us for

more information.

6 | Introduction Smart-Vue Pro Duo / Quatro User Guide

Introduction

Smart-Vue Pro Duo/Quatro is the new generation of wireless

data logger by Thermo Scientific.

This user guide presents an overview of Smart-Vue Pro

followed by instructions to get your data logger(s) up and

running quickly. The focus of this document is mainly on

physical/hardware aspects of the data logger.

The configuration instructions and software settings are

provided in detail in related documentation for Smart-Vue Pro

companion software applications and hardware:

•Smart-Vue Pro, a Thermo Scientific web application

offering a complete sensor programming and monitoring

interface.

•LoRaWAN-enabled receiver, a very long range

wireless communication protocol for communicating with

smart-vue pro data loggers.

•Smart Connect, a Thermo Scientific Smart Connect

mobile application for managing Smart-Vue Pro

Duo/Quatro data loggers in bluetooth mode.

About this User Guide

Terminology

The following are the terms and references used in this user

guide:

Alarm: An alarm is a state which occurs when the system

observes a sensor reading that is outside programmed range

limits such as, a temperature reading that is too high or too

low. When an alarm occurs, the system notifies you by

sending an alert.

Alert: An alert is a notification sent by the system to you when

the system observes an alarm condition or a potential

problem.

Bluetooth™: Short-range wireless communication protocol

generally used in point-to-point connections (i.e., between a

smart-phone and a data logger). Wireless range with

bluetooth smart reaches up to about 100 feet (~30 meters).

Dry Contact Input: Binary state detection, also known as

“open/closed” detection.

Smart-Vue Pro LoRaWAN: Very-long-range wireless

communication protocol generally with one single receiver

installed per site. Line-of-sight range up to nearly 10 miles

(16 km).

Data logger: Refers to Smart-Vue Pro Duo/Quatro device.

Equipment: Refers to the equipment or space (such as a

refrigerator, freezer, incubator or cold room) which monitors

one or more physical parameters.

Smart Connect: Thermo Scientific Smart Connect mobile

application for bluetooth-enabled smart-phones and tablets.

Used with Smart-Vue Pro Duo/Quatro in bluetooth mode.

Web platform: Internet-based service in which data from

data loggers is stored and accessed via the Smart-Vue Pro

application.

Smart-Vue Alert: Smart-Vue alert is a subscription license

for an international internet-based platform that delivers alerts

to cellular phones via SMS/text messages and voice calls.

Smart-Vue Pro: A web application that allows you to

configure, manage and monitor Smart-Vue Pro Duo/Quatro

data loggers.

Differentiating Smart-Vue Pro

LoRaWAN vs Bluetooth

Features in this Guide

Smart-Vue Pro Duo/Quatro data logger can be used with

either Smart-Vue Pro LoRaWAN or bluetooth wireless

connectivity. Some product features described in this user

guide may differ according to the technology used.

Specific differences are given in the following table with

comments regarding each technology option.

Note: Comments for Smart-Vue Pro

LoRaWAN operation are shown next to

the Smart-Vue Pro LoRaWAN logo.

Note: Comments for bluetooth operation are

shown next to the bluetooth logo.

Smart-Vue Pro Duo / Quatro User Guide Introduction | 7

Intended Use

The Smart-Vue Pro Duo/Quatro data logger (module) is

intended to monitor and record a range of physical

parameters such as temperature, humidity, 4-20mA

depending on the sensors connected to it. The data logger

supports digital and PT100 sensors, 4-20mA sensors.

The information collected using the sensors can then be

transmitted to a database server or cloud using a

very-long-range or short-range wireless communication

protocols like LoRaWAN or Bluetooth wireless connectivity

respectively. The data can be accessed via a mobile

application (Smart Connect) or via a web application

(Smart-Vue Pro), additionally, Smart Connect permits the user

to push the data to the cloud. The Smart-Vue Pro Duo/Quatro

data logger and the Smart-Vue Pro Web application enables

the user to manage the entire Smart-Vue Pro solutions. The

system can also support audio and visual signaling devices

such as Smart Remote Contact (module) and Smart Siren

(module). Refer to the user guides of these modules for more

information.

The Smart-Vue Pro Solutions is intended to monitor and

record critical physical parameters in life science,

pharmaceutical, and agri-food sectors and perfect for

monitoring several pieces of equipment simultaneously that

are used in a typical laboratory or in a storage facility.

These products should only be used by authorized and

adequately trained personnel. It is not considered as a

medical device or accessory to a medical device and has

therefore not been registered with a medical device regulatory

agency. The Smart-Vue Pro Solutions is 21CFRPart11

compatible system and can be used as a document

management system in a regulated environment, when the

entire solution is controlled through the web application

(Smart-Vue Pro). It is the user’s responsibility to develop

verification and validation protocol based on the record

keeping requirements.

Smart-Vue Pro Solution

Overview

Smart-Vue Pro Duo/Quatro data loggers monitor

temperature, humidity and other physical parameters which

are critical in life science, pharmaceutical and agricultural food

sectors. Smart-Vue Pro provides a flexible solution for

monitoring parameters simultaneously on several pieces of

equipment in lab or storage facilities.

LoRaWAN vs Bluetooth

Wireless Topologies

Supporting both bluetooth and LoRaWAN wireless

technologies, Smart-Vue Pro Duo/Quatro offers two distinct

wireless connectivity models to cover one’s need.

Smart-Vue Pro LoRaWAN

Smart-Vue Pro LoRaWAN is a long-range wireless technology

(with range up to 10 mi./16 km).

The architecture is based on a “star” topology in which

wireless data loggers connect to a gateway communicating

bi-directionally with a server that collects and analyzes

information collected by sensors (either on the cloud or

on-premises server).

Smart-Vue Pro LoRaWAN’s long range connectivity simplifies

installations on geographically large sites where a single

receiver is often sufficient to cover entire complexes and

campuses.

Figure 1. Smart-Vue Pro Duo/Quatro data loggers in

Smart-Vue Pro LoRaWAN mode communicate

with a receiver that is connected to the

Smart-Vue Pro web platform

8 | Introduction Smart-Vue Pro Duo / Quatro User Guide

Bluetooth

Bluetooth is a shorter-range wireless technology (with range

up to about 100 feet/30 m) commonly found in Smart

Connect mobile devices such as smart-phones and tablets.

Bluetooth architecture is generally based on a “point-to

point” connection between two devices such as a Smart-Vue

Pro Duo/Quatro data logger and a smart-phone.

Figure 2. Smart-Vue Pro Duo/Quatro data logger in

Bluetooth mode with point-to-point

connection to smart-phone or tablet running

Smart Connect mobile application

Smart-Vue Pro Duo/Quatro

Data Logger Features

Monitoring

• Multi-parameter sensor monitoring with support for a

variety of smart-sensors, digital and Pt100 sensors and

4-20mA sensors.

• The Smart Connect mobile app supports monitoring of a

single temperature sensor.

• Automatic recognition of connected sensors.

• Configurable high/low alarm limits, delays, alerts and

transmission interval.

• Calibration parameters embedded directly in Thermo

Scientific Smart-Sensors (for ease-of-use and standard

exchange for periodic calibration) with parameters

downloaded automatically.

• Unlimited data storage with Smart-Vue Pro web

architecture.

• Internal data logger memory for upto 4,000 readings per

channel (8,000 total on Smart-Vue Pro Duo; 16,000 total

on Smart-Vue Pro Quatro).

• Alarm transmission upon detection.

• ISO 17025 (COFRAC) calibration, in-house certified

laboratory calibration or NIST traceable calibration.

Connectivity

• Wireless connectivity with Smart-Vue Pro LoRaWAN

(long-range, low-power wireless connectivity or Bluetooth

Low Energy (shorter range).

• Automatic wireless connection to Smart-Vue Pro

LoRaWAN enabled receiver.

Device Details

• 2.4-inch color resistive LCD touch screen (supports

operation with gloves).

• Runs on two LS17500 batteries or optional 5 V USB

adapter.

• Integrated alarm buzzer for real-time alerts on-site.

• Clear plastic outer ring lights to provide visual alert.

• Dry contact input (available as of firmware version 2.6.x).

Information Flow

The following diagram summarizes the Smart-Vue Pro

Duo/Quatro information flow. Note that Smart-Vue Pro

Duo/Quatro data loggers can be used with either Smart-Vue

Pro LoRaWAN or Bluetooth wireless connectivity.

Figure 3. Smart-Vue Pro Duo/Quatro data loggers

communicate with the Web platform

either via a LoRaWAN receiver or a

Bluetooth smart-phone, tablet

Smart-Vue Pro Duo / Quatro User Guide Introduction | 9

Table 2. Smart-Vue Pro LoRaWAN Operation

Step Process Comments

1Place your Smart-Vue Pro Duo/Quatro data logger

appropriately to monitor your equipment.

For best wireless performance, follow

recommendations when physically placing your device,

(Installing the Smart-Vue Pro Duo/Quatro Data

Logger).

Plug in wired sensors (which are recognized

automatically) and/or pair Bluetooth sensors (for

future).

Use the data logger’s touch screen to connect

wirelessly to your on-premises LoRaWAN™

receiver or a public network.

application.

Set up the data logger and configure data logging

settings such as upper and lower limit values. Push

the configuration to your Smart-Vue Pro Duo/

Quatro data logger. The data logger is updated and

data logging begins.

The Smart-Vue Pro web application authenticates

users, configures alarm settings, programs data

logging, analyses data, generates reports.

The data logger collects data from its sensors and

transfers the information wirelessly to the

Smart-Vue Pro LoRaWAN network.

Installed at your site, LoRaWAN receiver transmits

locally collected sensor data via the internet to the web

platform or your server as programmed.

5Uploaded data logging details are visible on

smart-vuepro.thermoscientific.com

You may use computers with web browser to access

readings and alarms.

Table 3. Bluetooth-only Operation

Step Process Comments

1Place the Smart-Vue Pro Duo/Quatro data logger

appropriately to monitor your equipment.

Note: Bluetooth connectivity is limited to about 30

meters indoors. Keep the data logger in an area that is

as unobstructed as possible.

Plug in wired sensor (which are recognized

automatically).

Note: You may plug only one sensor into a Smart-

Vue Pro Duo/Quatro data logger in bluetooth

mode.

Use the data loggers touch screen to deactivate

Smart-Vue Pro LoRaWAN connectivity

(Menu Advanced [PIN code] OK

LoRaWAN On/Off Off Save).

Bluetooth remains active when you deactivate

LoRaWAN functionality.

application.

Create the Smart-Vue Pro Duo/Quatro data logger.

Use the Smart Connect to configure data logging

settings such as upper and lower limit values.

All data logger configuration is handled using the

Thermo Scientific Smart Connect mobile application.

10 | Introduction Smart-Vue Pro Duo / Quatro User Guide

Hardware Overview

Front View

The front of the Smart-Vue Pro Duo/Quatro data logger is

comprised of two user interface elements, the touch screen

LCD and the clear plastic LED status ring around the casing.

The touch screen shows data collected by the sensor(s) and

gives you access to the setup menus. The status LED

provides visual indications of the data logger status. For LED

color indications, see LED Status Indications.

Figure 4. Smart-Vue Pro Duo/Quatro data logger

with two external sensors

Rear View

The battery compartment is located behind the device. See

Activating the Smart-Vue Pro Duo/Quatro Data Logger

for LoRaWAN for instructions on inserting the provided

batteries. The rear view of the device has a slot to attach the

data logger to the plastic holder using the padlock (optional).

See Installing the Smart-Vue Pro Duo/Quatro Data

Logger to check procedure of mounting the device.

Figure 5. Rear view of the data logger

Side View

The right side of the Smart-Vue Pro Duo/Quatro data logger

features a USB port to power your data logger using the 5 V

micro USB adapter (provided).

Figure 6. Side view of the Smart-Vue Pro

Duo/Quatro data logger

The data logger collects data from its sensors.

Data is stored until you access it with either your

smart-phone or tablet (which can push it to the web

platform).

Your smart-phone or tablet will transmit locally

collected sensor data via the internet to the web

platform.

5Uploaded data logging details are visible on

smart-vuepro.thermoscientific.com.

Table 3. Bluetooth-only Operation

Step Process Comments

Status

indicator light LCD display with data

logger name,

temperature, signal

and battery indicators

Smart-Sensor connector

for external sensors

(physical connectors with

Smart-Vue Pro

Duo/Quatro and

connectors with the

Quatro model)

Battery

compartment

door

Hole for

fastening a

security padlock

Device USB port

Smart-Vue Pro Duo / Quatro User Guide Introduction | 11

Bottom View

The Smart-Vue Pro Duo/Quatro data loggers supports a

combination of wired sensors.

• Up to 4 parameters on Smart-Vue Pro Quatro.

• Up to 2 parameters with Smart-Vue Pro Duo.

Plugs for connecting wired sensors are located at the bottom

of the unit (two physical connectors on the Quatro model and

one physical connector on the duo model). The plugs support

single and dual sensor probes.

Figure 7. Bottom view of the Smart-Vue Pro Quatro

data logger (with two physical

connectors)

Compatible Sensor Types

Smart-Vue Pro Duo/Quatro data loggers supports a range of

Thermo Fisher external digital temperature sensors and

smart-sensors.

Figure 8. Example of Smart-Vue Pro Duo/Quatro

data logger with two wired sensors

Each Smart-Vue Pro Duo/Quatro connector can be

configured individually for supported sensor types. Consult

with your authorized Smart-Vue representative for the latest

product information.

Note: Compatible Sensors for Smart-Vue Pro Duo / Quatro

Data Logger are

• Emerald Wireless Remote Sensor

•Triple - CO

2, Temperature and Humidity Sensor

• Differential Pressure Sensor

• Pt100 adapters

Refer Supplemental User guide 331942H01 for more details.

Probe / Smart-Sensor

connectors

Hole for fastening a

security padlock

Smart sensor

External digital sensor

12 | Introduction Smart-Vue Pro Duo / Quatro User Guide

Package Contents

• One Smart-Vue Pro Duo/Quatro wireless data logger with

antenna.

• Two 3.6 V LS17500 batteries (with additional screw for

battery cover).

• One data logger mounting kit with magnetic holder and

screws.

• 2 x 1.5 m (about 5 feet) flat sensor extension cables,

sensor ties and hooks.

Optional

• 5 V AC/DC adapter with micro USB cable.

• Padlock to lock the data logger onto its holder for

security.

• One calibration certificate per sensor (if purchased with

calibration option).

• Round cable / flat ribbon cable for external digital

temperature sensor.

Smart-Vue Pro Duo / Quatro User Guide Technical Specifications | 13

Technical Specifications

Characteristics

General

• Color LCD display: 2.4 inches

• Touch screen: Resistive

• Number of sensor channels (simultaneous data logging

sessions): Smart-Vue Pro Duo: 2 channels, Smart-Vue

Pro Quatro: 4 channels.

• Number of sensors:

Smart-Vue Pro Duo/Quatro: One physical plug (supports

1 single, dual or triple sensor).

Smart-Vue Pro Quatro: Two physical plugs (supports

2 single, dual or triple sensors).

Note: It is important to distinguish between the number of

sensors assigned to a given data logger and the number of

simultaneous data logging sessions you can have.

• Audible alarms: Buzzer

• Power Supply: Batteries or micro-USB (5 V)

Note: The AC power adapter is provided separately and

has: 5 V DC/1.2A. Batteries must be replaced by authorized

technicians only.

Wireless Technologies

• LoRaWAN wireless connectivity for data transmission:

• Range: approximately 16 km (about 10 miles) in

line-of-sight.

• Frequency (worldwide): 868 MHz (EU) or 915 MHz

(USA).

• Max power output: 14 dB (EU) or 20 dB (USA).

• Bluetooth Low Energy (BLE, also referred to as Bluetooth

Smart) technology for use with Smart Connect mobile

application:

• Range: Up to about 50 meters (160 ft.) in

line-of-sight.

• Frequency: 2.4 GHz (worldwide).

Monitoring

• Read interval with Bluetooth operation: 5 seconds

minimum on Smart-Vue Pro Duo or 15 seconds minimum

on Smart-Vue Pro Quatro, up to 12 hours maximum.

• Read interval with LoRaWAN operation: 1 minute to

12 hours (depending on the transfer interval configured in

the Smart-Vue Pro web application).

• Data storage:

• Unlimited on Smart-Vue Pro web platform.

• 4,000 readings (per sensor channel) stored in internal

data logger memory.

• 1, 2 or 4 sensor tiles displayed simultaneously.

• Color LED indicator for alarm status or bluetooth

communication.

Operating and Storage

Conditions

• Indoor use only in non-harsh environments with mounting

height under 2 meters (about 6.5 feet) from the floor.

• Data logger operating range: 0 °C to + 50 °C and

0 to 90% RH (non-condensing).

• Data logger storage conditions: -10°C to + 60 °C

(14 °F and 140 °F); 0 to 99.99% relative humidity

non-condensing.

• Pollution degree: 2 (normally only non-conductive

pollution is supported; temporary conductivity caused by

condensation is to be expected).

14 | Technical Specifications Smart-Vue Pro Duo / Quatro User Guide

Casing & Dimensions

• Product protection: Designed for indoor use.

• Casing: ABS plastic

• Weight: 180 g (6.4 oz.) with batteries

• Dimensions: 100.8 x 110.8 x 296 mm

(4 x 4.4 x 1.1 inches).

• Mounting:

• Magnet (for use on metallic, non-painted surfaces).

• Screw mount (optional locking with padlock). In this

case, use two appropriate screws in compliance with

regulatory requirements and safety practices.

Smart-Vue Pro Duo / Quatro User Guide Technical Specifications | 15

Dimensions

Data Logger (in mm)

Figure 9. Smart-Vue Pro Duo/Quatro data logger dimensions

Mounting Kit

Figure 10. Smart-Vue Pro Duo/Quatro mounting kit details

La pagina sta caricando ...

Thermo Fisher Scientific Smart-Vue Pro Duo and Quatro Guida utente

Marca: Thermo Fisher Scientific

Modello: Smart-Vue Pro Duo and Quatro

Tipo: Guida utente

Scarica il pdf

rapporto

in altre lingue

English: Thermo Fisher Scientific Smart-Vue Pro Duo and Quatro User guide

Thermo Fisher Scientific Smart-Vue Pro Duo and Quatro Guida utente

Thermo Fisher Scientific Smart-Vue Pro Duo and Quatro Guida utente

in altre lingue

Documenti correlati

Altri documenti