Eizo FDX1501 Manuale utente

Eizo
Marca
Eizo
Modello
FDX1501
Categoria
TV
Tipo
Manuale utente

Questo manuale è adatto anche per

Important
Please read this User’s Manual, and the Setup Manual (separate
volume) carefully to familiarize yourself with safe and effective usage.
• Please refer to the Setup Manual for basic information ranging from
connection of the monitor to a PC to using the monitor.
• The latest User’s Manual is available for download from our web site:
http://www.eizo.com
Cover
2
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO Corporation.
EIZO Corporation is under no obligation to hold any submitted material or information condential unless prior
arrangements are made pursuant to EIZO Corporation’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that
EIZO monitor specications are subject to change without notice.
3
Notice for this monitor
This product may not be covered by warranty for uses other than those described in the Setup Manual.
The specications noted in this manual are only applicable when the following are used:
• Signal cables specied by us
Only use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
Monitors should be set to a lower brightness to reduce changes in luminosity caused by long-term use and maintain a
stable display.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime (refer to
“Cleaning” (page 4)).
The LCD panel is manufactured using high-precision technology. Although, missing pixels or lit pixels may appear on
the LCD panel, this is not a malfunction. Percentage of effective dots: 99.9994% or higher.
The backlight of the LCD panel has a xed lifetime. When the screen becomes dark or begins to icker, please contact
your local EIZO representative.
Do not scratch or press on the panel with any sharp objects, as this may result in damage to the panel. Do not attempt
to brush with tissues as this may scratch the panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may
occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until
the dew condensation disappears, otherwise it may cause some damage to the monitor.
(Cautions for the Use of the Touch Panel)
• During touch operation
Be careful of the following points. Otherwise, damage may occur to the monitor.
- Do not strongly press, scratch, or poke the panel.
- Do not touch the panel with hard objects such as ballpoint pens or metals.
4
Cleaning
Attention
• Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the panel, and
also quality deterioration of the image.
• Never use any thinner, benzene, wax, and abrasive cleaner, which may damage the panel.
• Do not allow liquid to enter the clearance between the panel and the panel frame.
Note
• The optional ScreenCleaner is recommended for cleaning the panel surface.
If necessary, the stains on the panel surface can be removed by moistening part of a soft cloth with water.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according
to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
5
CONTENTS
CONTENTS
Cover ...................................................................... 1
Notice for this monitor ............................................ 3
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 6
1-1. Features ......................................................... 6
1-2. EIZO LCD Utility Disk.................................... 6
●
Diskcontentsandsoftwareoverview............. 6
●
Tousetouchpaneldriver............................... 6
1-3. Basic Operations and Functions ................ 7
●
BasicAdjustmentmenuoperations................ 7
●
Functions......................................................... 8
Chapter 2 Adjusting Screens ............................ 9
2-1. Setting the Resolution ................................. 9
●
Displayresolution............................................ 9
●
Settingresolution............................................ 9
Windows7................................................... 9
WindowsVista............................................. 9
WindowsXP................................................. 9
MacOSX..................................................... 9
2-2. Displaying Screen Correctly.......................10
●
DigitalSignalInput.........................................10
●
AnalogSignalInput........................................10
2-3. Adjusting Color ............................................14
●
Toselectthedisplaymode(ColorMode).......14
●
Toperformadvancedadjustments................14
●
Adjustablesettingsineachmode..................14
●
Toadjustbrightness<Brightness>................15
●
Toadjustcontrast<Contrast>........................15
●
Toadjustcolortemperature<Temperature>..16
●
Toadjustgain<Gain>....................................16
Chapter 3 Setting Monitor ............................... 17
3-1. Changing Adjustment Menu Display
Position <Menu Position> ...........................17
3-2. Locking Buttons ...........................................17
●
Tolockadjustments/settingsinthe
Adjustmentmenu...........................................17
●
Tolockalloperations.....................................17
3-3. Setting the EIZO Logo Display ...................18
3-4. Setting Language <Language> ..................18
3-5. Enabling/Disabling DDC/CI
communication ............................................18
3-6. Resetting the Monitor to the Default
Settings <Reset> ..........................................19
●
Toresetthecoloradjustments.......................19
●
Toresetalladjustmentstothedefault
settings...........................................................19
Chapter 4 Power Saving Functions ................ 20
4-1. Power Saving Mode .................................... 20
4-2. Setting Power Indicator <Power
Indicator> ..................................................... 20
4-3. Enabling/Disabling Auto Power-OFF
<Off Timer> ...................................................21
Chapter 5 Troubleshooting .............................. 22
5-1. No picture .................................................... 22
5-2. Imaging problems (for both digital and
analog) .......................................................... 23
5-3. Imaging problems (for analog only) ......... 24
5-4. Other problems ........................................... 24
5-5. Touch panel problems (for FDX1501T
only) .............................................................. 25
Chapter 6 Reference ........................................ 26
6-1. Connecting Multiple PCs ........................... 26
●
Toswitchamonginputsignals...................... 26
●
Tosetinputsignalselection<InputSignal>. 27
6-2. Displaying Monitor Information
<Information> .............................................. 27
6-3. Specications ............................................. 28
6-4. Glossary ....................................................... 32
6-5. Preset Timing .............................................. 34
Appendix .............................................................. 35
Trademark ............................................................... 35
LIMITED WARRANTY ............................................. 36
China Measures for RoHS Compliance in
ChinaRoHS ........................................................ 45
6
Chapter1Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO color LCD monitor.
1-1. Features
• 15” LCD
• Applicable to the resolution of 1024 × 768.
• LED backlight LCD panel
The LED backlight provides better power efciency and reduced power consumption compared to existing uorescent
backlight LCD panels. No mercury, a hazardous substance, is used.
• High-intensity pane
Maintains visibility under high-illumination conditions
• Supports a wide range of operating temperatures and operating humidity
- Operating temperature : 0°C to 50°C (32°F to 122°F)
- Operating humidity: 20% to 90% R.H. (wet bulb temperature ≤ 39 °C (102 °F), no condensation)
• A 3-year long-term warranty for 24-hour continuous use
• Resistive technology touch panel function (for FDX1501T only)
Compatible with Microsoft Windows 7 / Vista / XP
1-2. EIZO LCD Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with this product. The following table shows the disk
contents and the overview of the software programs.
●
Disk contents and software overview
The disk includes adjustment software, touch panel software, and user’s manuals. Refer to Readme.txt le on
the disk for software startup procedures or le access procedures.
Item Overview Windows Macintosh
A“Readme.txt”le √ √
Screenadjustmentpatternles Usedwhenadjustingtheimageof
analogsignalinputmanually.
√ √
TouchPanelDriver
*
Driverfortouchpanel √ -
User’sManualofthismonitor(PDFle) √ √
User’sManualforTouchPanelDriver(PDFle)
*
√ -
*
UsedonlyfortheFDX1501T.
●
To use touch panel driver
For information on how to install or use the touch panel driver, see the Touch Panel Driver User’s Manual (on
the CD-ROM).
7
Chapter1Introduction
1-3. Basic Operations and Functions
●
Basic Adjustment menu operations
1.
Displaying Adjustment Menu
1. Press . The adjustment menu appears.
Atdigitalsignalinput
2.
Adjusting/Setting
1. Choose a menu to adjust/set with or , and then press . The Sub menu appears.
2. Choose an item to adjust/set with or , and then press . The adjustment/ setting menu appears.
3. Adjust/set the selected item with or , and then press .
3.
Exiting
1. Choose <Return> from the Sub menu and press . The Main menu appears.
2. Choose <Exit> from the Main menu and press
. The Adjustment menu exits.
Note
•
The Adjustment menu can also be exited by pressing
twice quickly.
8
Chapter1Introduction
●
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main menu Setting Reference
AutoAdjustment
*1
Screen
“2-2.DisplayingScreenCorrectly”
(page10)
Range
Screen
Clock
*1
Phase
*1
Hor.Position
*1
Ver.Position
*1
Smoothing
Return
Color
*2
Brightness
“2-3.AdjustingColor”(page14)
ColorMode
Contrast
Temperature
Gain
Reset
“Toresetthecoloradjustments”
(page19)
Others
InputSignal
“Tosetinputsignalselection<Input
Signal>”(page27)
OffTimer
“4-3.Enabling/DisablingAuto
Power-OFF<OffTimer>”(page21)
MenuPosition
“3-1.ChangingAdjustmentMenu
DisplayPosition<MenuPosition>”
(page17)
PowerIndicator
“4-2.SettingPowerIndicator
<PowerIndicator>”(page20)
Reset
“Toresetalladjustmentstothe
defaultsettings”(page19)
Information
“6-2.DisplayingMonitorInformation
<Information>”(page27)
Language
“3-4.SettingLanguage
<Language>”(page18)
*1
Analogsignalinputonly
*2
Theadjustment/settingsavailableonthe<Color>menudependontheselectedColorMode(see
“Adjustablesettingsineachmode”(page14)).
9
Chapter2AdjustingScreens
Chapter 2 Adjusting Screens
2-1. Setting the Resolution
●
Display resolution
For details on compatible resolutions, refer to “Compatible Resolutions” in the Setup Manual.
●
Setting resolution
When you connect the monitor to the PC and nd that the resolution is improper, or when you want to
change the resolution, follow the procedure below.
Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Screen resolution”.
3. On the “Screen Resolution” dialog box, select the monitor.
4. Click “Resolution” to select the desired resolution.
5. Click the “OK” button.
6. When a conrmation dialog box is displayed, click [Keep changes].
Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog box, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the “OK” button.
6. When a conrmation dialog box is displayed, click “Yes”.
Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog box is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the “OK” button to close the dialog box.
Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog box is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog box, select the “Display” tab and select desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close
the window.
10
Chapter2AdjustingScreens
2-2. Displaying Screen Correctly
●
Digital Signal Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if
characters and/or lines appear blurred, go to “6. Modify blurred characters or lines.” (page 13).
When performing more advanced adjustment, see “2-3. Adjusting Color” (page 14) and subsequent pages.
●
Analog Signal Input
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• The self adjustment function does not work for the images under the vertical resolution of 480 or less.
• The self adjustment and auto adjustment functions work correctly when an image is fully displayed over the
Windows or Macintosh display area. They do not work properly in the cases below:
- When an image is displayed only on a part of the screen (command prompt window, for example)
- When a black background (wallpaper, etc.) is in use
Also, these functions cannot work properly in some graphic boards.
The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
Note
• The self adjustment function works when all of the following conditions are satised:
- When a signal is input into the monitor for the rst time or when a resolution or vertical/horizontal scan frequency
not used before is set
If the screen is not displayed correctly even after performing the self adjustment operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
Setting Procedures
1.
Perform the auto adjustment.
●
To adjust ickering, screen position, and screen size automatically <Screen>
Procedure
1. Choose <Auto Adjustment> from the Adjustment menu, and press
.
2. Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
3. Select <Execute> with or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming“1.Performtheautoadjustment.”(page10),
performtheadjustmentsaccordingtotheproceduresonthefollowingpages.Ifthescreenisdisplayed
correctly,goto“5.Adjustingcolorgradation.”(page13).
11
Chapter2AdjustingScreens
2.
Prepare to use analog screen adjustment patterns.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern les”.
Note
• For details and instructions on opening the “Screen adjustment pattern les”, refer to the Readme.txt le.
3.
Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
●
To adjust ickering, screen position, and screen size automatically <Screen>
Procedure
1. Display Pattern 1 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose <Auto Adjustment> from the Adjustment menu, and press .
3. Choose <Screen> from the <Auto Adjustment> menu, and press
.
The <Auto Adjustment> menu appears.
4. Select <Execute> with or , and press .
Flickering, screen position, and screen size are corrected by the auto-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterperforming“3.Performtheautoadjustmentagain
withtheanalogscreenadjustmentpatterndisplayed.”(page11),performtheadjustmentsaccordingto
theproceduresonthefollowingpages.Ifthescreenisdisplayedcorrectly,goto“5.Adjustingcolor
gradation.”(page13).
4.
Choose <Screen> from the Adjustment menu to perform advanced
adjustments.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars <Clock>
Procedure
1. Choose <Clock> from the <Screen> menu, and press
.
The <Clock> menu appears.
2. Adjust the clock with or to eliminate vertical bars.
Press or slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or bars appear on the screen after adjustment, proceed to “Phase” to remove ickering or
blurring.
12
Chapter2AdjustingScreens
●
To remove ickering or blurring <Phase>
Procedure
1. Choose <Phase> from the <Screen> menu, and press
.
The <Phase> menu appears.
2. Adjust the phase with or to minimize ickering or blurring.
3. Press
to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars <Clock>”.
(Clock → Phase → Position)
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct the screen position <Hor.Position> <Ver.Position>
Note
• Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Screen> menu, and press
.
The <Hor.Position> or <Ver.Position> menu appears.
2. Adjust the position with or .
3. Press
to exit the adjustment.
4. Close Pattern 1.
13
Chapter2AdjustingScreens
5.
Adjusting color gradation.
●
To adjust color gradation automatically <Range>
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose <Auto Adjustment> from the Adjustment menu, and press .
3. Choose <Range> from the <Auto Adjustment> menu, and press
.
The <Range> menu appears.
4. Select <Execute> with or , and press .
The output range is set automatically.
5. Close Pattern 2.
6.
Modify blurred characters or lines.
●
To modify blurred characters/lines <Smoothing>
When an image is displayed with a resolution other than recommended, the characters or lines of the
displayed image may blur.
Attention
• Smoothing setting may not be required depending on the display resolution. (You cannot choose the smoothing icon.)
Adjustable range
1 to 5
Procedure
1. Choose <Screen> from the Adjustment menu, and press
.
2. Choose <Smoothing> from the <Screen> menu, and press
.
The <Smoothing> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
14
Chapter2AdjustingScreens
2-3. Adjusting Color
●
To select the display mode (Color Mode)
This function allows easy selection of a desired mode according to monitor application.
Display Modes
Mode Purpose
Custom Selectoneoftheseusermodestodeneadesiredsetofparametersettings.
EyeCare Allowsthebrightnesstobesetlowerthanpossiblewithothermodes.
sRGB SuitableforcolormatchingwithsRGBcompatibleperipherals.
Text Suitablefordisplayingtextsforwordprocessingorspreadsheets.
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Color Mode> from the <Color> menu, and press
.
3. Use
or for adjustment.
4. Press
to exit the adjustment.
●
To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to congure and save a separate set of color settings
for each mode.
Attention
• The monitor will take about 30 minutes before its internal electric components stabilize. Wait 30 minutes or more
after turning the monitor power on before starting adjustment.
• Perform the range adjustment rst when adjusting color for analog signals (see “To adjust color gradation
automatically <Range>” (page 13)).
• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.
Note
• The values shown in “%” or “K” are available only as reference.
●
Adjustable settings in each mode
The adjustable settings depend on the mode. (You cannot select any non-adjustable or non-settable function.)
√: Adjustable -: Not adjustable
Icon Function
Color Mode
Custom EyeCare sRGB Text
Brightness
√ √ √ √
Contrast
√ - - √
Temperature
√ √ - √
Gain
√ √ - -
Reset
√ √ √ √
15
Chapter2AdjustingScreens
●
To adjust brightness <Brightness>
The screen brightness is adjusted by changing the brightness of the backlight (light source from the LCD
back panel).
Adjustable range
0 to 100%
Procedure
1. Press
or .
The Brightness menu appears.
2. Use or for adjustment.
3. Press
to exit the adjustment.
Note
• If you feel that the image is too bright even if the brightness is set to 0% or that the image is too dark even if the
brightness is set to 100%, adjust the contrast.
• Alternatively, you can use <Brightness> under <Color> in the Adjustment menu to adjust it.
●
To adjust contrast <Contrast>
The brightness of the screen is adjusted by varying the video signal level.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Contrast> from the <Color> menu, and press
.
The <Contrast> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
• In the contrast of 50%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is too dark even if the brightness is set to 100% (Set the contrast to higher than 50%.)
- When you feel the image is too bright even if the brightness is set to 0% (Set the contrast to lower than 50%.)
16
Chapter2AdjustingScreens
●
To adjust color temperature <Temperature>
Color temperature can be adjusted.
The color temperature is normally used to express the hue of “White” and/or “Black” by a numerical value.
The value is expressed in degrees “K” (Kelvin).
The screen becomes reddish at a low color temperature, and bluish at a high color temperature, like the ame
temperature. A gain preset value is set for each color temperature setting value.
Adjustable range
Off, 5000K, 6500K, 9300K
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Temperature> from the <Color> menu, and press
.
The <Temperature> menu appears.
3. Use or for adjustment.
4. Press
to exit the adjustment.
Note
• <Gain> allows you to perform more advanced adjustment (see “To adjust gain <Gain>” (page 16)).
• If you set to “Off”, the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When gain is changed, the color temperature is changed to “Off”.
●
To adjust gain <Gain>
The brightness of each color component red, green, and blue is called “Gain”. You can change the hue of
“white” by adjusting gain.
Adjustable range
0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Gain> from the <Color> menu, and press
.
The <Gain> menu appears.
3. Adjust gain with or for each of red, green, and blue.
4. Press
to exit the adjustment.
Attention
• Using this function may make some color gradations unavailable for display.
Note
• The value of gain changes with that of color temperature.
• When gain is changed, the color temperature is changed to “Off”.
17
Chapter3SettingMonitor
Chapter 3 Setting Monitor
3-1. Changing Adjustment Menu Display Position
<Menu Position>
You can change the display position of the Adjustment menu.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Menu Position> from the <Others> menu, and press
.
The <Menu Position> menu appears.
3. Adjust the position with or .
4. Press
to exit the adjustment.
3-2. Locking Buttons
This function allows you to lock to prevent changing the adjusted/set status.
●
To lock adjustments/settings in the Adjustment menu
Procedure
1. Press
to turn off the monitor.
2. Press
holding down to turn on the monitor.
You can toggle between Lock and Unlock by performing steps 1 and 2.
●
To lock all operations
Procedure
1. Holding
down, press for ve seconds while the screen is displayed.
You can toggle between Lock and Unlock by performing this step.
18
Chapter3SettingMonitor
3-3. Setting the EIZO Logo Display
You can choose to display or not to display the EIZO logo, which appears when you turn on the monitor.
Procedure
1. Press
to turn off the monitor.
2. Press
holding down to turn on the monitor.
The EIZO logo display setting is toggled by performing the operation in steps 1 and 2.
3-4. Setting Language <Language>
This function allows you to select a language for the Adjustment menu and messages.
Selectable languages
English / German / French / Spanish / Italian / Swedish / Simplied Chinese/ Traditional Chinese/ Japanese
Procedure
1. Choose <Language> from the Adjustment menu, and press
.
The <Language> menu appears.
2. Choose a language with or .
3. Press
to exit the adjustment.
3-5. Enabling/Disabling DDC/CI communication
This function allows you to enable/disable the DDC/CI communication (see “6-4. Glossary” (page 32)).
Procedure
1. Press
to turn off the monitor.
2. Press
holding down to turn on the monitor.
You can toggle between Enable and Disable by performing steps 1 and 2.
Note
• You can check the DDC/CI setting in the <Information> menu.
19
Chapter3SettingMonitor
3-6. Resetting the Monitor to the Default Settings
<Reset>
There are two different Resets: Color Reset for only resetting the color adjustments to the default settings and
Full Reset for resetting all settings to the defaults.
Attention
• After resetting, you cannot undo the operation.
Note
• Regarding the default setting, see “Main Default Settings” (page 30).
●
To reset the color adjustments
This function only resets the color adjustments for the currently selected mode to the default settings.
Procedure
1. Choose <Color> from the Adjustment menu, and press
.
2. Choose <Reset> from the <Color> menu, and press
.
3. Select “Reset” with
or .
4. Press
.
The color adjustments revert to the default settings.
●
To reset all adjustments to the default settings
This function resets all adjustments to the default settings.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Reset> from the <Others> menu, and press
.
3. Select “Reset” with
or .
4. Press
.
All adjustments revert to the default settings.
20
Chapter4PowerSavingFunctions
Chapter 4 Power Saving Functions
4-1. Power Saving Mode
When the monitor has shifted to the power saving mode, the images on the screen are not displayed.
Attention
• Unplugging the power cord completely shuts off power supply to the monitor.
Power Saving System
Analog Signal Input
This monitor complies with the VESA DPM standard.
PC Monitor
Power
Indicator
On Operating Blue
Powersaving
mode
STAND-BY
SUSPENDED
OFF
Powersavingmode Orange
Digital Signal Input
This monitor complies with the DVI DMPM standard.
The monitor enters the power saving mode in ve seconds in connection with the PC setting.
PC Monitor
Power
Indicator
On Operating Blue
Powersavingmode Powersavingmode Orange
Exiting the power saving mode
If the monitor receives input, it automatically exits the power saving mode and returns to the normal display
mode.
4-2. Setting Power Indicator <Power Indicator>
This function allows you to set the power indicator (blue) ON/OFF in the monitor ON condition.
Procedure
1. Choose <Others> from the Adjustment menu, and press
.
2. Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
3. Select “Enable” or “Disable” with or .
4. Press
to exit the adjustment.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Eizo FDX1501 Manuale utente

Eizo
Marca
Eizo
Modello
FDX1501
Categoria
TV
Tipo
Manuale utente
Questo manuale è adatto anche per
Scarica il pdf
rapporto

in altre lingue

Documenti correlati

Altri documenti