ProLights PIXIEZOOMXB Manuale utente

PIXIEZOOMXB

PAR LED ZOOM

EN - IT

USER MANUAL

MANUALE UTENTE

reproduced in any form or by any means for any commercial use.

In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the

characteristics stated in this instruction manual at any time and without prior notice.

All revisions and updates are available in the ‘manuals’ section on site www.musiclights.it

REV. 01-05/19

1

PIXIEZOOMXB

Packing content

• PIXIEZOOMXB

• Power cable

• Safety cable

• User manual

TABLE OF CONTENTS

Safety

General instructions

Warnings and installation precautions

1 Introduction

1. 1 Description

1. 2 Technical specifications

1. 3 Operating elements and connections

2 Installation

2. 1 Mounting

3 Functions and settings

3. 1 Operation

3. 2 Basic

3. 3 Menu structure

3. 4 DMX mode

3. 5 DMX addressing

3. 6 Collegamento

3. 7 Wireless settings

3. 8 Screen

3. 9 Advanced

3. 10 Information

3. 11 Master/Slave mode

3. 12 Effects mode

3. 13 Fixture color

3. 14 White presents

3. 15 Manual mode

3. 16 DMX control

3. 17 Connection of the DMX line

3. 18 Construction of the DMX termination

4 Maintenance

4. 1 Maintenance and cleaning the unit

4. 2 Trouble shooting

2

3

5

6

7

8

10

11

12

13

14

16

17

PIXIEZOOMXB

2

SAFETY

General instruction

• The products referred to in this manual conform to the European Community Directives and are there-

fore marked with .

• The unit is supplied with hazardous network voltage (230V~). Leave servicing to skilled personnel only.

Never make any modiﬁcations on the unit not described in this instruction manual, otherwise you will

risk an electric shock.

• Connection must be made to a power supply system ﬁtted with eﬃcient earthing (Class I appliance ac-

cording to standard EN 60598-1). It is, moreover, recommended to protect the supply lines of the units

from indirect contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a qualiﬁed electrical

installer. Check that the main frequency and voltage correspond to those for which the unit is designed

as given on the electrical data label.

• This unit is not for home use, only professional applications.

• Never use the ﬁxture under the following conditions:

- in places subject to vibrations or bumps;

- in places with a temperature of over 40 °C.

• Make certain that no inﬂammable liquids, water or metal objects enter the ﬁxture.

• Do not dismantle or modify the ﬁxture.

• All work must always be carried out by qualiﬁed technical personnel. Contact the nearest sales point for

an inspection or contact the manufacturer directly.

• If the unit is to be put out of operation deﬁnitively, take it to a local recycling

plant for a disposal which is not harmful to the environment.

Warnings and installation precautions

• If this device will be operated in any way diﬀerent to the one described in this manual, it may suﬀer

damage and the guarantee becomes void. Furthermore, any other operation may lead to dangers like

short circuit, burns, electric shock, etc.

• Before starting any maintenance work or cleaning the projector, cut oﬀ power from the main supply.

• Always additionally secure the projector with the safety rope. When carrying out any work, always com-

ply scrupulously with all the regulations (particularly regarding safety) currently in force in the country

in which the ﬁxture’s being used.

• Install the ﬁxture in a well ventilated place.

• Keep any inﬂammable material at a safe distance from the ﬁxture.

• Shields, lenses or ultraviolet screens shall be changed if they have become damaged to such an extent

that their eﬀectiveness is impaired.

• The lamp (LED) shall be changed if it has become damaged or thermally deformed.

• Never look directly at the light beam. Please note that fast changes in lighting, e. g. ﬂashing light, may

trigger epileptic seizures in photosensitive persons or persons with epilepsy.

• Do not touch the product’s housing when operating because it may be very hot.

• This product was designed and built strictly for the use indicated in this documentation. Any other use,

not expressly indicated here, could compromise the good condition/operation of the product and/or

be a source of danger.

• We decline any liability deriving from improper use of the product.

WARNING! Before carrying out any operations with the unit, carefully read this instruction

manual and keep it with cure for future reference. It contains important information about

the installation, usage and maintenance of the unit.

3

PIXIEZOOMXB

- 1 - INTRODUCTION

PIXIEZOOMXB is a super bright single-source IP rated LED PAR featuring a 6°- 45° linear zoom and a fully

homogenised output. PIXIEZOOMXB is equipped with a proprietary 280W RGB + Warm White LED module

which delivers a high-quality white reproduction with high CRI and TLCI parameters as well an extremely

precise colour tuning. PIXIEZOOMXB is an ideal solution for any application where users want a superior

light quality but without the view of multi-cell ﬁxtures. Being IP rated and oﬀering a wide zoom range, the

PIXIEZOOMXB oﬀers unprecedented ﬂexibility and is a truly indispensable ﬁxture for every rental house.

1.2 TECHNICAL SPECIFICATIONS

LIGHT SOURCE

• Source: 280W RGB + Warm White

• CT: 6.500K

• CRI: > 92

• R9: > 94

• Luminous ﬂux: (6°) 3.670 lm - (45°) 3’795lm

• Lux: (6°) 29’900 lx - (45°) 1’590lx @3 m full

• Lux: (6°) 10’764 lx - (45°) 572lx @5 m full

• Source life expectancy: 70.000

• Other: TM-30-15RF/RG: 90 / 99 - TLCI: > 85

OPTICS

• Zoom: 6° - 45° motorised linear zoom

• Field angle: 11° - 58°

• Lens diameter: 125mm

• Lens type: high-quality glass lens optics

COLOUR SYSTEM

• Colour mixing: RGB + Warm White

• CTC: CTC control through independent DMX channel, + / - green and magenta correction and amber

shift activation by DMX

• White presets: 2.800 K - 8.000K

• Colour wheel: virtual colour wheel with presets

• Macros: several pre-build macros with adjustable speed

DYNAMIC EFFECTS

• Manual colour mode: manual adjustment of colour

• Auto mode: built-in programs with execution speed adjustment

BODY

• Hardware on-board: on board mechanics for rigging to the ceiling

• Body: sturdy die-cast aluminium body conceived for long-time durability

• Body colour: black

CONTROL

• Protocols: DMX512, RDM, W-DMX

• DMX channels: 5 / 7 / 11channel

• W-DMX: included, wireless solution receiver

PIXIEZOOMXB

4

335

418

342

Fig.1

Technical drawing

• RDM: RDM ready for ﬁxture remote monitor and settings

• Display: black OLED high resolution display

• Firmware upgrade: yes, via USB - DMX interface (UPBOX1) not included

• Master/Slave: for synchronized operation of more units linked in a chain

ELECTRONICS

• Dimmer: linear 0 ~ 100% electronic dimmer

• Dimmer curves: diﬀerent dimming curves available

• Strobe / shutter: 1 - 30 Hz, electronic

• Battery backup: battery backup for user operation without connecting to the main power

• Operating temperature: -20° ~ +45°

• Flicker: ﬂicker free frequency with adjustable PWM

• Selectable PWM: 600 ~ 25.000 Hz

ELECTRICAL

• Power supply: 100-240 V – 50/60 Hz

• Power consumption (at 230 V): 271W

• Power consumption (at 120 V): 276W

• Output (at 230 V): 8 units on a single power line

• Output (at 120 V): 4 units on a single power line

PHYSICAL

• Cooling: combination of heat pipe cooling system and low noise fan

• Sospension and ﬁxing: hanging bracket suitable for safe hanging and positioning

• Signal connection: Seetronic XLR 5p IN/OUT connectors

• Power connection: Seetronic powerCON waterproof IN/OUT connectors

• IP rating: 65 for temporary outdoor application, not for ﬁxed installation

• Dimensions (WxHxD): 335x418x342mm

• Weight: 11,8kg

5

PIXIEZOOMXB

1.3 OPERATING ELEMENTS AND CONNECTIONS

1. ADJUSTMENT KNOB for the mounting bracket

2. HOLES for the barn door mounting

3. DOUBLE MOUNTING BRACKET

4. CONTROL PANEL with OLED display and 5

buttons used to access the control panel

functions and manage them.

5. DMX IN (5-pole XLR): 1 = ground, 2 = DMX-, 3

= DMX+, 4 N/C, 5 N/C.

Rear panelFront panel

Fig.2

6. POWER IN (PowerCON TRUE IN): for

connection to a socket 100-240V~/50-60Hz)

via the supplied mains cable.

7. POWER OUT (PowerCON TRUE OUT): power

output for connection of multiple units in

series.

8. DMX OUT (5-pole XLR): 1 = ground, 2 = DMX-,

3 = DMX+, 4 N/C, 5 N/C.

1 2

3

4

5

6

7

8

PIXIEZOOMXB

6

- 2 - INSTALLATION

2.1 MOUNTING

PIXIEZOOMXB may be set up on a solid and even surface. The unit can also be mounted upside down to a

cross arm. For ﬁxing, stable mounting clips are required. The mounting place must be of suﬃcient stability

and be able to support a weight of 10 times of the unit’s weight.

When carrying out any installation, always comply scrupulously with all the regulations (particularly re-

garding safety) currently in force in the country in which the ﬁxture’s being used.

• Install the projector at a suitable location by means of the mounting bracket.

• Always additionally secure the projector with the safety rope from falling down. For this purpose, fas-

ten the safety rope at a suitable position so that the maximum fall of the projector will be 20 cm.

• Adjust the projector and use the screw to slightly release or tighten the locking mechanism of the

bracket if is necessary.

Fig.3

CLAMP

SAFETY

CABLE

7

PIXIEZOOMXB

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Then the unit is ready for operation

and can be operated via a DMX controller or it independently performs its show program in succession.

To switch oﬀ, disconnect the mains plug from the socket. For a more convenient operation it is recom-

mended to connect the unit to a socket which can be switched on and oﬀ via a light switch.

3.2 BASIC

Access control panel functions using the ﬁve panel touch buttons located directly underneath the black

OLED display (ﬁg.4).

Fig.4 - Functions of the buttons

MENU

UP DOWN ENTER HIGHLIGHT

Used to access the

menu or to return a

previous menu option

Navigates downwards

through the menu

list and increases the

numeric value when

in a function

Navigates upwards

through the menu

list and decreases the

numeric value when

in a function

Used to select and

store the current

menu or confirm the

current function value

or option within a

menu

Hold for three seconds

to access Full

PIXIEZOOMXB

8

3.3 MENU STRUCTURE

MENU

1 CONNECT

ð

DMX Address

ð

Value (1-512)

DMX Mode

ð

5 CH

7 CH

11 CH

22 CH

Wireless Setting

ð

Receive Oﬀ/On

ð

Off

On

Receive Reset

ð

No

Yes

Wireless To DMX

ð

No

Yes

2 SETUP

ð

Screen

ð

Backlight

ð

On

10S

20S

30S

ð

Flip Display

ð

No

Yes

ð

Key Lock

ð

No

Yes

3 ADVANCED

ð

Full On Mode

ð

HB

Studio

Off

Dimmer Mode

ð

Dimmer1

Dimmer2

Dimmer3

Color Calibration

ð

White Balance

ð

Off

Adjust

ð

Red <125-255>

Green <125-255>

Blue <125-255>

White <125-255>

ð

Calibration

LED Frequency

ð

600Hz

1200Hz

2000Hz

4000Hz

6000Hz

25kHZ

Fan Mode

ð

Auto

On

Oﬀ

Silent

Zoom Inverse

ð

No

Yes

Factory Reload

ð

No

Yes

4 INFORMATION

ð

Fixture Hours

ð

<9999H>

Version

ð

<V1.0>

UID

ð

15D00226****

5 STAND ALONE

ð

Master/Slave

ð

Master

Slave

9

PIXIEZOOMXB

Effects

ð

Eﬀect 1

Eﬀect 2

Eﬀect 3

Eﬀect 4

Eﬀect 5

ð

<1-100>

Static

ð

Fixed Color

ð

R

G

B

W

GB

RB

RG

RGB

RW

GW

BW

RGW

RBW

GBW

RGBW

ð

White Presets

ð

2800K

3000K

3200K

3400K

3600K

3800K

4000K

4200K

4400K

4600K

4800K

5000K

5200K

5400K

5600K

5800K

6000K

6200K

6400K

6600K

6800K

7000K

7200K

7400K

7600K

7800K

8000K

ð

Manual Color

ð

Red

Green

Blue

White

ð

<000-255>

Zoom

ð

<000-255>

Zoom Oﬀset

ð

<000-255>

PIXIEZOOMXB

10

. . . . . . . . . . . .

DMX512 Controller

DMX Address: 33 DMX Address: 48DMX Address: 38 DMX Address: 43

Fig.5 - Example 5 DMX channels configuration

Number of

DMX channels

Start address

(example)

DMX Address

occupied

Next possible start

address for unit No. 1

Next possible start

address for unit No. 2

Next possible start

address for unit No. 3

5 33 33-37 38 43 48

7 33 33-39 40 47 54

11 33 33-43 44 55 66

22 33 33-54 55 66 77

3.4 DMX MODE

• Press the MENU button so many times until show Connect and press ENTER to conﬁrm.

• Press the button UP/DOWN to select DMX Mode, then choose the desired DMX mode: 5Ch, 7Ch, 11Ch o 22Ch.

Press ENTER button to store.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

The tables on page 14 e 15 indicate the operating mode and DMX value.

3.5 DMX ADDRESSING

• Press the MENU button so many times until show Connect and press ENTER to conﬁrm.

• Press the button UP/DOWN to select Dmx Address, then choose the desired DMX address: 001 - 512. Press

and hold to scroll quickly.

• Press ENTER button to store.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

To able to operate the PIXIEZOOMXB with a light controller, adjust the DMX start address for the ﬁrst a

DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the ﬁrst DMX

channel, adjust the start address 33 on the PIXIEZOOMXB. The other functions of the light eﬀect panel are

then automatically assigned to the following addresses.

An example with the start address 33 is shown below:

11

PIXIEZOOMXB

3.6 LINKING

1. Connect the DMX OUT of the master unit via 5-pole XLR cable to the DMX IN of the ﬁrst slave unit.

2. Connect the DMX OUT of the ﬁrst slave unit to the DMX IN of the second slave unit, etc. until all units

are connected in a chain.

3.7 WIRELESS SETTINGS

• To enter the Wireless mode press the MENU button until the display shows Connect, then select Wireless

Settung using the ENTER button.

• Select the Receive On/Oﬀ function using the UP/DOWN buttons, then press the ENTER button.

• To activate the Receive function, use the UP/DOWN buttons and select the On option.

• Press the ENTER button to conﬁrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

NOTE - Once you have performed these steps, you must synchronize with any WiFi unit with which you

want to communicate by pressing the sync button on it. At this point connect the DMX console to the

WiFi unit to open the communication with the PIXIEZOOMXB.

• To reset the unit, select the Receive Reset function using the UP/DOWN buttons, press the RIGHT button

until the display shows Connect, then select Receive Reset using the UP/DOWN buttons, then press the

ENTER button.

• To activate the mode use the UP / DOWN keys and select the Yes option.

• Press the RIGHT button to conﬁrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

• To activate the Wireless to DMX function, use the UP / DOWN buttons to press the ENTER button until the

display shows Connect, then select Wireless to DMX, then press the ENTER button.

• To activate the mode use the UP/DOWN buttons and select the Yes option.

• Press the ENTER button to conﬁrm the selection.

• Press the MENU button to go back or wait a few seconds to exit the setup menu.

3.8 SCREEN

It is possible to modify the following parameters, related to the display, following the same procedure:

• Press the MENU button to access the main menu.

• Press the UP/DOWN button to scroll through the menu, select Set Up, then press the ENTER button ac-

cess the next menu.

• Press the UP/DOWN button to select Screen and press the ENTER button to proceed.

• Select the proposed option with the UP/DOWN button and press the ENTER button to conﬁrm.

- Backlight - Auto Oﬀ display backlight. This function allows you to switch oﬀ automatically the back-

lighting of the display after a certain time which can be set using the directional keys. To have the

display always on select On or set a value between those shown (10s, 20s, 30s) to turn oﬀ the display

once the chosen time has elapsed, after exiting the menu.

- Flip Display - Display orientation. This feature allows you to rotate the display by 180 ° to get a better

view of the display when the unit is hanging upside down. Select Yes to activate the function, No to

deactivate it or AUTO.

- Key lock - With this function, you can lock the keys on the control panel to prevent, for example, tam-

pering with the settings. If this function is activated, the keys are locked automatically. To disable or

temporarily disable or disable the key lock function, press the keys in the following order to regain

access to the menu commands: UP, DOWN, UP, DOWN, ENTER. Select Yes to activate the function or

No to deactivate it.

• Press the ENTER button to conﬁrm the selection.

• Press the MENU key repeatedly to exit the menu and to save the changes made.

PIXIEZOOMXB

12

3.9 ADVANCED

You can change the parameters for the device by following these steps:

• Press the button MENU to enter the menu mode.

• Use the buttons UP/DOWN to select Advanced. Press the button RIGHT to conﬁrm.

• Press the buttons UP/DOWN to select the desired option and press the button ENTER to conﬁrm:

- Full On Mode - Select the Full on Mode function to set the HB mode (High Brightness Mode, with the

maxinum value of the colors) or Studio mode with a automatic white balance.

- Dimmer Mode - Adjusting the dimmer. Enter in Dimmer Mode to select specific dimming curve.

Particularly when set:

• Off: The increase in light intensity is linear.

• Dimmer 1: Light intensity control is finger at low levels and coarse at high levels.

• Dimmer 2: Light intensity control is finger at high levels and coarse at low levels.

• Dimmer 3: Light intensity control is finger at low levels and high levels and coarse at medium levels.

- Color Calibration - To set the same brightness on each color. Select the color (Red, Green, Blue and White)

and the value (125-255) using the UP / DOWN buttons and press the ENTER button to conﬁrm.

- LED Frequency - To adjust the frequency of the LEDs. Select the frequency 600 Hz - 25 KHz using the UP/

DOWN buttons and press the RIGHT button to conﬁrm the selection.

- Fan Mode - Fan speed. Select the desired fan speed (Auto, On, Off, Silent) through the button UP/ DOWN.

- Zoom Inverse - Fan speed. Select Yes or No and select ENTER to confirm.

- Factory Reload - To reset the unit. Select Yes or No and select ENTER to confirm.

• Press repeatedly the button MENU to return the menu mode.

3.10 INFORMATION

To view all the information on the device, proceed as follows:

• Press the MENU button to access the main menu. Press the UP/DOWN button to select Information, then

press the ENTER button to access the next menu.

• Press the UP/DOWN button to scroll through the menu, then select one of the following information-

and press the ENTER button to display it.- Fixture Time - Through the Fixture Time function, the operat-

ing time of the projector can be shown on the display.

- Fixture Time - To view the operating time of the projector.

- Software Version - To view the firmware version will show on the display.

- UID - To view the identiﬁcation ID for the RDM control.

• Press repeatedly the button MENU to return the menu mode.

3.11 MASTER/SLAVE MODE

This mode will allow you to link up the units together without a controller. Choose a unit to function as the

Master. The unit must be the ﬁrst unit in line; other units will work as slave.

• Press the MENU button so many times until the display shows Stand Alone, then press ENTER.

• Select Master/Slave, then press ENTER.

• Using UP/DOWN buttons, select the desired mode and then press ENTER.

• Press the button MENU to go back or to meet the waiting time to exit the setup menu

• Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the

units. For longer cable runs we suggest a terminator at the last ﬁxture (see page 15).

• Set the slaves to the same DMX modes.

3.12 EFFECTS MODE

This ﬁxture has a built-in automatic program. To access this, please see the below instructions:

• To enter the Eﬀects mode, press the MENU button to access the menu.

• Throught the UP/DOWN button select Stand Alone, then select Eﬀect. Press ENTER to conﬁrm

• Use UP/DOWN to select the desired program Eﬀect 1, Eﬀect 2, Eﬀect 3, Eﬀect 4, Eﬀect 5 then press ENTER to

13

PIXIEZOOMXB

conﬁrm.

• Set the value (1 - 100), through UP/DOWN, then press ENTER to conﬁrm.

NOTE: after selecting the described mode, the unit will be Master.

3.13 FIXED COLOR

This ﬁxture has the ability to accept custom static color settings. Access these chases via the control panel

on the back of the ﬁxture.

• Press the MENU button so many times until the display shows Stand Alone, then press ENTER.

• Using UP/DOWN buttons Select Static, then press ENTER.

• Select Fixed Color through the UP/DOWN buttons, then press ENTER.

• Set the colors R , G , B, W, GB, RB, RG, RGB, RW, GW, BW, RGW, RBW, GBW, RGBW through the UP/DOWN buttons,

then press ENTER.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

NOTE: after selecting the described mode, the unit will be Master.

3.14 WHITE PRESETS

The white presets mode allow you to choose a preprogrammed white color temperature.

• Press the MENU button so many times until the display shows Stand Alone, then press ENTER.

• Using UP/DOWN buttons Select Static, then press ENTER.

• Select White Presets through the UP/DOWN buttons, then press ENTER.

• Choose the white color temperature (2800K, 3000K, 3200K, 3400K, 3600K, 3800K, 4000K, 4200K, 4400K, 4600K

4800K, 5000K, 5200K, 5400K, 5600K, 5800K, 6000K, 6200K, 6400K, 6600K, 6800K, 7000K, 7200K, 7400K, 7600K, 7800K,

8000K) through the UP/DOWN buttons, then press ENTER.

• Press the MENU button to go back or to meet the waiting time to exit the setup menu.

NOTE: after selecting the described mode, the unit will be Master.

3.15 MANUAL MODE

This mode allows to combine the colors red, green, blue and white (R, G, B, W).

• Press the MENU button so many times until the display shows Stand Alone, then press ENTER.

• Using UP/DOWN buttons Select Static, then press ENTER.

• Select Manual Color through the UP/DOWN buttons, then press ENTER.

• Select the color R, G, B, W through the UP/DOWN buttons, then press ENTER.

• Using UP/DOWN buttons, select the desired color value 000 - 255.

• Press ENTER button to continue to the next color R, G, B,W.

• Continue until the desired mix is obtained.

• Press the button MENU to go back or to meet the waiting time to exit the setup menu.

NOTE: after selecting the described mode, the unit will be Master.

NOTE: If the projector is in Blackout mode before to receive DMX signal, and if the DMX signal is lost, the

projector will remain on according to the last received DMX value. If the projector was in STATIC or AUTO

mode before to receive DMX signal, if the DMX signal is lost, the projector will return to the previously set

STATIC or AUTO.

PIXIEZOOMXB

14

3.16 DMX CONTROL

5 CHANNELS

MODE

FUNCTION DMX

Value

5 Ch

1

RED

0~100% 000 - 255

2

GREEN

0~100% 000 - 255

3

BLUE

0~100% 000 - 255

4

WHITE

0~100% 000 - 255

5

ZOOM

0~100% 000 - 255

7 CHANNELS

MODE

FUNCTION DMX

Value

7 Ch

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

WHITE

0~100% 000 - 255

6

STROBE

No Function (shutter open)

Slow to fast

No Function (shutter open)

Random slow to fast

No Function (shutter open)

000 - 030

031 - 100

101 -130

131 - 200

201 - 255

7

ZOOM

0~100% 000 - 255

15

PIXIEZOOMXB

11 CANALI

MODE

FUNCTION DMX

Value

11 Ch

1

DIMMER

0~100% 000 - 255

2

RED

0~100% 000 - 255

3

GREEN

0~100% 000 - 255

4

BLUE

0~100% 000 - 255

5

WHITE

0~100% 000 - 255

6

STROBE

No Function (shutter open)

Slow to fast

No Function (shutter open)

Random slow to fast

No Function (shutter open)

000 - 030

031 -100

101 - 130

131 - 200

201 - 255

7

ZOOM

0~100% 000 - 255

8

COLOR FUNCTION

No Function

Color presets

CTC

CTC+Amber Shift

Effects

000 - 010

011 - 085

086 - 130

131 - 170

171 - 255

9

COLOR PRESETS

R 100%, G 0~100%, B 0%

R 100%~0%, G 100%, B 0%

R 0%, G 100%, B 0~100%

R 0% G 100%~0% B 100%

R 0%~100% G 0% B 100%

R 100% G 0% B 100%~0%

R 100% G 0%~100% B 0%~100%

R 100%~0% G 100%~0% B 100%

R 100% G 100% B 100% W 100%

000 - 028

029 - 056

057 - 084

085 - 112

113 - 140

141 - 168

169 - 196

197 - 224

225 - 255

11 CHANNELS

MODE

FUNCTION DMX

Value

11 Ch

9

CTC Or CTC+Amber Shift

2800K

3000K

3200K

3400K

3600K

3800K

4000K

4200K

4400K

4600K

4800K

5000K

5200K

5400K

5600K

5800K

6000K

6200K

6400K

6600K

6800K

7000K

7200K

7400K

7600K

7800K

8000K

000 - 000

001 - 010

011 - 020

021 - 030

031 - 040

041 - 050

051 - 060

061 - 070

071 - 080

081 - 090

091 - 100

101 - 110

111 - 120

121 - 130

131 - 140

141 - 150

151 - 160

161 - 170

171 - 180

181 - 190

191 - 200

201 - 210

211 - 220

221 - 230

231 - 240

241 - 250

251 - 255

EFFECTS

Effects 1

Effects 2

Effects 3

Effects 4

Effects 5 (Effects1- 4)

000 - 060

061 - 110

111 - 160

161 - 210

211 - 255

10

EFFECTS SPEED

Effects speed slow to fast 000 - 255

HUE

0

-25~25 (Ch8. is 86-130 and 131-170 )

000

001 - 255

11

DIMMER FADE

Preset dimmer speed from display menu

0~100%

000 - 000

001 - 255

PIXIEZOOMXB

16

22 CANALI

MODE

FUNCTION DMX

Value

22 Ch

8

RED

0~100% 000 - 255

9

RED Fine

0~100% 000 - 255

10

GREEN

0~100% 000 - 255

11

GREEN Fine

0~100% 000 - 255

12

BLUE

0~100% 000 - 255

13

BLUE Fine

0~100% 000 - 255

14

WHITE

0~100% 000 - 255

15

WHITE Fine

0~100% 000 - 255

16

COLOR FUNCTION

No function

Color presets

Effects

000 - 085

086 - 171

172 - 255

17

COLOR PRESETS

R 100%, G 0~100%, B 0%

R 100%~0%, G 100%, B 0%

R 0%, G 100%, B 0~100%

R 0% G 100%~0% B 100%

R 0%~100% G 0% B 100%

R 100% G 0% B 100%~0%

R 100% G 0%~100% B 0%~100%

R 100%~0% G 100%~0% B 100%

R 100% G 100% B 100% W 100%

000 - 028

029 - 056

057 - 084

085 - 112

113 - 140

141 - 168

169 - 196

197 - 224

225 - 255

EFFECTS

Effects 1

Effects 2

Effects 3

Effects 4

Effects 5 (Effects1- 4)

000 - 060

061 - 110

111 - 160

161 - 210

211 - 255

18

EFFECTS SPEED

Effects speed slow to fast 000-255

19

CTO ON COLORS

0~100% 000 - 255

20

ZOOM

0~100% 000 - 255

21

ZOOM Fine

0~100% 000 - 255

22

DIMMER FADE

Preset dimmer speed from display menu

0~100%

000 - 000

001 - 255

22 CANALI

MODE

FUNCTION DMX

Value

22 Ch

1

DIMMER

0~100% 000 - 255

2

DIMMER Fine

0~100% 000 - 255

3

STROBE

No Function (shutter open)

Slow to fast

No Function (shutter open)

Random slow to fast

No Function (shutter open)

000 - 030

031 -100

101 - 130

131 - 200

201 - 255

4

WHITE FUNCTION

CTC

CTC+Amber Shift

000 - 127

128 - 255

5

CTC or CTC+Amber Shift

2800K

3000K

3200K

3400K

3600K

3800K

4000K

4200K

4400K

4600K

4800K

5000K

5200K

5400K

5600K

5800K

6000K

6200K

6400K

6600K

6800K

7000K

7200K

7400K

7600K

7800K

8000K

000 - 000

001 - 010

011 - 020

021 - 030

031 - 040

041 - 050

051 - 060

061 - 070

071 - 080

081 - 090

091 - 100

101 - 110

111 - 120

121 - 130

131 - 140

141 - 150

151 - 160

161 - 170

171 - 180

181 - 190

191 - 200

201 - 210

211 - 220

221 - 230

231 - 240

241 - 250

251 - 255

6

HUE

-25

0

+25

000 - 127

128 - 128

129 - 255

7

CROSSFADE

0~100% 000 - 255

17

PIXIEZOOMXB

Fig.6

Fig.7

3.17 CONNECTION OF THE DMX LINE

DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped-

ance and low capacity.

The following diagram shows the connection mode:

ATTENTION

The screened parts of the cable (sleeve) must never be connected to the system’s earth, as this would

cause faulty ﬁxture and controller operation.

Over long runs can be necessary to insert a DMX level matching ampliﬁer.

For those connections the use of balanced microphone cable is not recommended because it cannot

transmit control DMX data reliably.

• Connect the controller DMX input to the DMX output of the ﬁrst unit.

• Connect the DMX output to the DMX input of the following unit. Connect again the output to the input

of the following unit until all the units are connected in chain.

• When the signal cable has to run longer distance is recommended to insert a DMX termination on the

last unit.

3.18 CONSTRUCTION OF THE DMX TERMINATION

The termination avoids the risk of DMX 512 signals being reﬂected back along the cable when they reach-

es the end of the line: under certain conditions and with certain cable lengths, this could cause them to

cancel the original signals.

The termination is prepared by soldering a 120Ω 1/4 W resistor between pins 2 and 3 of the 5-pin male XLR

connector, as shown in ﬁgure.

DMX - OUTPUT

XLR socket

DMX - INPUT

XLR plug

Pin1 : GND - Shield

Pin2 : - Negative

Pin3 : + Positive

Pin4 : N/C

Pin5 : N/C

Example:

5 pin XLR connector

4

PIXIEZOOMXB

18

- 4 - MAINTENANCE

4.1 MAINTENANCE AND CLEANING THE UNIT

• Make sure the area below the installation place is free from unwanted persons during setup.

• Switch oﬀ the unit, unplug the main cable and wait until the unit has cooled down.

• All screws used for installing the device and any of its parts should be tightly fastened and should not

be corroded.

• Housings, ﬁxations and installation spots (ceiling, trusses, suspensions) should be totally free from any

deformation.

• The main cables must be in impeccable condition and should be replaced immediately even when a

small problem is detected.

• It is recommended to clean the front at regular intervals, from impurities caused by dust, smoke, or

other particles to ensure that the light is radiated at maximum brightness. For cleaning, disconnect the

main plug from the socket. Use a soft, clean cloth moistened with a mild detergent. Then carefully wipe

the part dry. For cleaning other housing parts use only a soft, clean cloth. Never use a liquid, it might

penetrate the unit and cause damage to it.

4.2 TROUBLESHOOTING

Problems Possible causes Checks and remedies

Fixture does not light up

• No mains supply

• Dimmer fader set to 0

• All color faders set to 0

• Faulty LED

• Faulty LED board

• Check the power supply voltage

• Increase the value of the dimmer channels

• Increase the value of the color channels

• Replace the LED board

General low light intensity

• Dirty lens assembly • Clean the fixture regularly

Fixture does not power up

• No power

• Loose or damaged power cord

• Faulty internal power supply

• Check for power on power outlet

• Check power cord

• Replace internal power supply

Fixture does not respond to DMX

• Wrong DMX addressing

• Damaged DMX cables

• Bouncing signals

• Check control panel and unit addressing

• Check DMX cables

• Install terminator as suggested

Contact an authorized service center in case of technical problems or not reported in the table can not be

resolved by the procedure given in the table.

La pagina sta caricando ...

ProLights PIXIEZOOMXB Manuale utente

ProLights PIXIEZOOMXB Manuale utente

in altre lingue

Documenti correlati

Altri documenti