Intermec EasyCoder 4440 Manuale utente

4420 and 4440 Bar Code Label Printer

P/N 066392-001

User’s

Manual

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. technical and service support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian technical and service support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service supplier.

The information contained herein is proprietary and is provided solely for the purpose of allowing

customers to operate and/or service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written permission of Intermec.

Information and specifications in this manual are subject to change without notice.

 1998 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER, Antares, Adara, Duratherm,

EZBuilder, Precision Print, PrintSet, Virtual Wedge, and CrossBar are either trademarks or

registered trademarks of Intermec.

Novell is a registered trademark of Novell, Inc.

Kimdura is a registered trademark of Kimberly Clark.

Kapton is a registered trademark of Dupont.

Speedo, Dutch, and Swiss are registered trademarks of Bitstream Inc.

The name Windows is a registered trademark of Microsoft Corporation.

IBM is a registered trademark of International Business Machines Corporation.

Throughout this manual, trademarked names may be used. Rather than put a trademark ( or )

symbol in every occurrence of a trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no intention of infringement.

1233*

Contents

Getting Started

Operating the Printer

1

2

*1233*

Maintaining the Printer

Troubleshooting

Optimizing Printer Performance

3

4

5

1233*

Using Test and Service Mode

Printer Specifications

Character Sets

6

A

B

*1233*

Communications Reference

Glossary

Index

C

G

I

Before You Begin

This section introduces you to standard warranty provisions, safety

precautions, warnings and cautions, document formatting conventions, and

sources of additional product information. A documentation roadmap is also

provided to guide you in finding information in this manual.

Warranty Information

To receive a copy of the standard warranty provision for this product, contact

your local Intermec sales organization. In the U.S. call 1-800-755-5505, and in

Canada call 1-800-688-7043. Otherwise, refer to the Worldwide Sales & Service

list that was shipped with this manual for the address and telephone number of

your Intermec sales organization.

Safety Summary

Your safety is extremely important. Read and follow all warnings and cautions

in this book before handling and operating Intermec equipment. You can be

seriously injured, and equipment and data can be damaged if you do not follow

the safety warnings and cautions.

Do not repair or adjust energized equipment alone

under any circumstances. Someone capable of providing first aid must always

be present for your safety.

Always obtain first aid or medical attention immediately after an

injury. Never neglect an injury, no matter how slight it seems.

Begin resuscitation immediately if someone is injured and stops

breathing. Any delay could result in death. To work on or near high voltage,

you should be familiar with approved industrial first aid methods.

Never work on energized equipment unless authorized

by a responsible authority. Energized electrical equipment is dangerous.

Electrical shock from energized equipment can cause death. If you must

perform authorized emergency work on energized equipment, be sure that you

comply strictly with approved safety regulations.

Warnings and Cautions

The warnings and cautions in this manual use the following format.

Warning

A warning alerts you of an operating procedure, practice, condition, or

statement that must be strictly observed to avoid death or serious

injury to the persons working on the equipment.

Avertissement

Un avertissement vous avertit d’une procédure de fonctionnement,

d’une méthode, d’un état ou d’un rapport qui doit être strictement

respecté pour éviter l’occurrence de mort ou de blessures graves aux

personnes manupulant l’équipement.

Caution

A caution alerts you to an operating procedure, practice, condition, or

statement that must be strictly observed to prevent equipment damage

or destruction, or corruption or loss of data.

Conseil

Une précaution vous avertit d’une procédure de fonctionnement, d’une

méthode, d’un état ou d’un rapport qui doit être strictement respecté

pour empêcher l’endommagement ou la destruction de l’équipement, ou

l’altération ou la perte de données.

About This Manual

Analysts and programmers should use this manual to learn how to operate,

program, and connect the printer to a network or system. The first part of this

manual tells you how to install, operate, maintain, and troubleshoot your

printer. The last part of the manual covers advanced features of the 4420 and

4440 printers. A basic understanding of programming and data

communications is necessary.

What You Will Find in This Manual

This table summarizes the information in each chapter of this manual:

Installing the printer Chapter 1, “Getting Started.” Tells you how to plug in the

printer, load fanfold media, configure the serial port, and

print a configuration test label.

Operating the printer Chapter 2, “Operating the Printer.” Explains the printer front

panel, tells you how to load roll media, load ribbon, and print

a test label.

Routine maintenance Chapter 3, “Maintaining the Printer.” Shows how to maintain

the printer.

Troubleshooting Chapter 4, “Troubleshooting.” Instructs how to troubleshoot

operation, quality, and communication problems.

Improving printer

performance

Chapter 5, “Optimizing Printer Performance.” Tells you how

to fine-tune the printer to increase processing time.

Test and Service

features

Chapter 6, “Using Test and Service Mode.” Provides

information on using Test and Service mode to print test

labels, perform procedures and configure settings.

Specifications Appendix A, “Printer Specifications.” Contains operating

specifications, options, and supported bar code symbologies.

Character sets Appendix B, “Character Sets.” Lists all of the character sets

that the 4420 and 4440 printers support.

Communications Appendix C, “Communications Reference.” Provides

information on communication protocols for your system and

serial port pin assignments.

Terms and Conventions

The following special terms and conventions occur throughout the manual.

Refer to the glossary for a complete list of terms.

“Printer”, “4420”, or “4440” refer to the 4420 and 4440 bar code label printers.

“Media” is the label stock (including thermal transfer ribbon) on which the

printer prints labels.

“Host” refers to a personal computer or other computer that communicates

with the printer.

The following conventions are used throughout this manual for operating

procedures and descriptions of the printer.

• Feed/Pause refers to the Feed/Pause button on the printer front panel.

• Downloaded commands appear in the order that you enter them into the

printer with the following conventions:

< > Angle brackets < > enclose mnemonic representations of ASCII control

characters. For example, <ETX> represents the ASCII “End of Text”

control character.

data

Italic text represents variable data, which you must replace with a real

value. For example,

n

signifies a variable for which you must designate a

constant value.

[

data

] Italic text within brackets represents optional data.

Ctrl Bold text represents a key on your keypad. For example, Ctrl represents

the Ctrl key.

Ctrl-Z When two keys are joined with a dash, press them simultaneously. For

example, if you see the command Ctrl-Z, press the two keys at the same

time.

E3;F3

Type all characters that appear in the Courier font by pressing an

individual key on the keypad.

Other Intermec Manuals

The following manuals provide additional information on understanding and

communicating with your printer.

4420 and 4440 Bar Code Label Printer Getting Started Guide

066394

IPL Programming Reference Manual

066396

The Bar Code Book

051241

Data Communications Reference Manual

044737

Getting Started

1

Getting to Know Your Printer

Features of the 4420 and 4440 printer include:

• High throughput

• IEEE 1284 parallel port

• 18,000 inch ribbon capacity

• Simple user interface

• Moveable label gap sensor

• Up to 8 inches per second (ips) print speed with selected media

• Direct thermal and thermal transfer printing support

• Precision Print technology

Feed/Pause

Power/Data

Alert

Empty/Pause

IntermecIntermec

4420

Feed/Pause

button

Power/Data LED

Alert LED

Empty/Pause

LED

Media

window

Media

cover

Media access door

44XXU.001

44XXU.003

1 2 3 4 5 6 7 8

Darkness adjust

control

DIP switches

Optional I/O

board port

Serial communications

port

Parallel port

On/Off

switch

AC power cord

receptacle

Fanfold media

access slot

O

I

Accessory port

Several options are available for use with the 4420 and 4440 printer. See

Appendix A, “Printer Specifications,” for a complete description of each option.

Note: The accessory port is reserved for future use.

Preparing the Printer for Installation

Before connecting the printer to your data collection system, you need to:

• connect the printer to a power source.

• open the printer.

• load media for fanfold printing.

• print a configuration test label.

These steps are described in the next sections.

1

Connecting the Printer to a Power Source

The back of the printer contains the AC power cord receptacle, the serial

communications port, the parallel communications port, the accessory port, the

darkness adjust, the On/Off switch, and two banks of DIP switches.

1. Turn off the printer.

2. Make sure the DIP switches on the back of the printer are set to their factory

default settings.

Turn on switch 1. Turn off switches 2 through 8.

Turn off switches 1 through 8.

44XXU.005

1 2 3 4 5 6 7 8

O

I

1 2 3 4 5 6 7 8

O

1 2 3 4 5 6 7 8

I

OI

3. Plug the AC power cord into the receptacle at the rear of the printer.

4. Plug the other end of the power cord into a grounded wall outlet or surge

protector.

5. Turn the printer on.

When you turn on the printer, the green light emitting diode (LED) lights and

the platen roller advances. The yellow LED lights until you load media.

Opening the Printer

You need to open the printer when you load media or perform maintenance

procedures.

1. Place the fingers of your right hand under the embossed section of the

media cover (the media cover release) and pull the bottom of the media

cover away from the base of the printer.

2. Grasp the front of the media cover with your left hand and lift the front of

the media cover upward to release it from the printer frame.

3. Lift the media cover away from the top of the printer.

44XXU.006

Feed/Pause

Power/Data

Alert

Empty/Pause

IntermecIntermec

4420

3

2

1

Loading Media for Fanfold Printing

Use the sample of fanfold media provided in the Media Envelope to complete

the following procedures. In fanfold printing, you place a stack of fanfold

media at the rear of the printer and feed it into the printer through a slot in the

rear cover.

Note: If you want to load rolls of media (instead of fanfold), see “Loading Roll Media

Into the Printer” in Chapter 2.

1. Open the printer.

2. Rotate the head lift lever clockwise to release the printhead.

3. Turn the supply roll retainer counterclockwise and slide it to the outer end

of the supply roll post.

44XXU.008

1 2 3 4 5 6 7 8

O

I

➤

Head lift

lever

Edge

guide

Lower

media

guide

Supply

roll

post

Supply

roll

retainer

Media access

slot

Fanfold

media

4. Place the fanfold media slightly lower than the slot in the printer back

cover. Align the fanfold media with the label path through the printer.

Insert media through the slot at the rear of the printer and thread it over the

supply roll post.

5. Unscrew the edge guide and slide it to the outer edge of the lower media

guide. Screw it in place.

6. Pull down on the lower media guide to allow easy access to the media path.

7. Insert the fanfold media through the printer mechanism as shown in the

illustration. The fanfold media passes over the supply roll post and out the

front opening of the printer.

8. Release the lower media guide and adjust the edge guide to position the

media firmly against the inside wall of the printer.

9. Slide the supply roll retainer up to the edge of the fanfold media and turn

the supply roll retainer clockwise until it locks firmly in place. This action

secures the media against the inside wall of the printer.

10. Rotate the head lift lever counterclockwise until it locks to engage the

printhead.

11. Replace the media cover.

12. Press the Feed/Pause button to advance one label through the printer.

The yellow Empty/Pause LED goes out. The printer is now ready to print the

configuration test label.

Note: If the yellow Empty/Pause LED does not go out, reload the media and try again.

Note: For your convenience, refer to the label with directions for loading media located

on the inside of the media cover the next time you load media.

La pagina sta caricando ...

Intermec EasyCoder 4440 Manuale utente

Questo manuale è adatto anche per

Intermec EasyCoder 4440 Manuale utente

in altre lingue

Documenti correlati

Altri documenti