NEC DT700 Series Manuale utente

DT300/DT700 Series Terminals

SV8300 USER’S GUID

E

NEC Unified Solutions, Inc.

February, 2008

LIABILITY

DISCLAIMER

NEC

Unified Solutions, Inc.

reserves

the

right

to

change

the

specifications, functions,

or

features,

at

any

time,

without

notice.

NEC

Unified Solutions, Inc.

has

prepared

this

document

for

use

by

it

s

em

ployees

and

customers.

The

information

contained

herein

is the

property of

NEC

Unified Solutions, Inc.

and sh

all

not

be

reproduced

without

prior written

approval

from

NEC

unified Solutions, Inc. All

brand

names

and product

names

on

this

docu

ment are

trademarks

or

registered

t

rademarks

of

their respective

companies.

Copyright

2008

NEC

Unified Solutions, Inc.

1

1.

I

NTRODUCTION

• General

This guide explains how to operate DT300/DT700 Series terminals.

CHAPTER 1 INTRODUCTION

Explains the configuration of this guide and contains

the following information.

• Face layout of DT Series

• Keys and Parts of DT Series

• Icon Display

• Menu List

CHAPTER 2 TERMINAL SETUP

Explains the terminal settings from DT Series.

CHAPTER 3 BASIC OPERATION

Explains the basic operation of DT Series.

CHAPTER 4 FEATURE OPERATION

Explains operating procedures for various Telephony

Server features.

2

• Face Layout

DT310/710 (2-Button without LCD)

DT310/710 (6-Button with LCD)

3

DT330/DT730 (12-Button with LCD)

Note: Security button is equipped on DT730 only.

DT330/DT730 (24-Button with LCD)

Note: Security button is equipped on DT730 only.

4

DT330/DT730 (32-Button with LCD)

Note: Security button is equipped on DT730 only.

DT330/DT730 (DESI Less 8-Button)

Note: Security button is equipped on DT730 only.

5

• Keys And Parts

DT310/DT710

(2-Button without LCD)

(1) Call Indicator Lamp

Lamp at top corner of DT Series Display flashes when a call

terminates to the terminal. Lamp lights steadily when a

message has been left.

(2) Programmable Keys

These keys can be programmed as Flexible Line

ke

y

/Pro

g

rammable Feature Ke

y

b

y

Tele

p

hon

y

Server Administrator.

When Telephony Server Administrator sets “One-Touch Speed

Dial key” on the programmable keys, users can assign any

numbers (ex. Telephone number, etc.) to the key (up to 24

digits).

* For the assignment of the keys, confirm to the

Telephony Server Administrator.

(3) Recall

Press key to finish the call and hear the dial tone.

(4) Feature

Used to activate any features as terminal setup

functions, etc. and to program One-Touch Speed

Dial Keys.

(5) Redial

(Last Number Call, Speed Calling-Station/Group) Press key to

activate redial feature. Press redial and scroll back through

numbers that have been dialed.

(6) Conf

Press key to establish a three-way conversation. LED on key

lights when key is active.

(7) Answer

When LED on this key is lit, press key to answer a waiting call.

(8) Mic

Press key to respond hands free. LED on this key lights during

speakerphone operation.

6

(9) Message

Press key to access the voice mail system.

(10)Up/Down

(

DOWN UP)

Used to adjust LCD contrast, speaker/receiver volume, and

ringer volume.

• LCD Contrast:

Press ( ) or ( ) key while idle.

• Speaker/Receiver Volume:

Press ( ) or ( ) key during conversation.

• Ringer Volume:

Press ( ) or ( ) key during ringing.

(11) Directory

Press key to activate speed calling - system feature.

(12) Speaker

Controls the built-in speaker which can be used for Hands Free

dialing/monitoring.

LED on key lights when key is active.

(13)Transfer

Allows the station user to transfer established calls to another

station, without attendant assistance.

(14)Hold

Press this key to place an internal or external call on hold.

7

DT330/DT730

(24-Button with LCD)

(1) Security Button (DT730 only)

The user can prevent information leakage from

terminal by simple operation.

(2) Call Indicator Lamp

Lamp at top corner of DT Series Display flashes when a call

terminates to the terminal. Lamp lights steadily when a

message has been left.

(3) LCD (Note 1)

LCD (Liquid Crystal Display) provides DT Series activity

information plus data, time and Soft Key Operation.

The LCD on DT310/DT710 has 24-character, 3-line capability.

The LCD on DT330/DT730 has 24-character, 4- line capability.

Top line is used exclusively for the status icons.

(4) Exit

The user can exit from the Help key mode by

pressing this key.

8

(5) Soft Keys

Any feature shown at the bottom of the LCD is

available. The appropriate feature key is displayed

on the screen according to the call handling process.

(6) Help

Explanations of the Soft Keys can be called up on

the LCD by pressing this key.

(7) Programmable Keys

These keys can be programmed as Flexible Line

key/Programmable Feature Key by Telephony

Server Administrator.

When Telephony Server Administrator sets “One-

Touch Speed Dial key” on the programmable keys,

users can assign any numbers (ex. Telephone

number, etc.) to the key (up to 24 digits).

* For the assignment of the keys, confirm to the

Telephony Server Administrator.

(8) Recall

Press key to finish the call and hear the dial tone.

(9) Feature

Used to activate any features as terminal setup

functions, etc. and to program One-Touch Speed

Dial Keys.

(10) Answer

When LED on this key is lit, press key to answer a

waiting call.

(11) Mic

Press key to respond hands free. LED on this key

lights during speakerphone operation.

(12) Menu

From this key, the user can access to the functions

not normally used (such as terminal settings,

downloads and access to XML applications) easily.

(13) Cursor

By using this Key, DT Series user can access to

various features with simple operation.

Two lines of menu items can be displayed at a

time. Use "Up" or "Down" key to scroll the item.

9



(Menu) 1/2







1. Call History

3. Directory

Up Down Cancel Save

User Menu

1. Call History

2. Directory

3. Tool

4. Call Function

5. Setting

6. Presence

#. Favorite

0. Config

Up Down Cancel Save

Note: DT310/710 (2-Button without LCD) does

not have the Cursor Key.

(14) Enter

DT330/DT730 Series has Shortcut Menu for frequently-

used features. The user can access to Shortcut Menu by

pressing Enter Key.

Note: DT310/710 Series does not support the Shortcut Menu.

Shortcut Menu includes the following features.

Feature Description

1. Missed Call Access to history of Missed Call.

2. Voice Mail

Access to history of incoming Voice

Mail.

3. IM Not supported.

4. Presence Not supported.

5. Bluetooth Not supported.

Note 2: A-law Countries [Australia, Russia, Latin America, UK,

Middle near East, other Asian nations]: # µ-law Countries [North

America, Japan, Hong Kong, Taiwan]:



(15) Redial

(Last Number Call, Speed Calling-Station/Group) Press

key to activate redial feature. Press redial and scroll back

through numbers that have been dialed.

When the desired number is displayed,

press the or # (Note 2) key to activate dialing.

(16) Speaker

Controls the built-in speaker which can be used for Hands

Free dialing/monitoring.

LED on key lights when key is active.

(17) Transfer

Allows the station user to transfer established calls to

another station, without attendant assistance.

(18) Hold

Press this key to place an internal or external call on hold.

Note 1: Not equipped on DTL-2E-1/ITL-2E-1.

10

DT330/DT730

(DESI Less 8-Button with LCD)

(1) Security Button (DT730 only)

The user can prevent information leakage from terminal by

simple operation.

(2) Call Indicator Lamp

Lamp at top corner of DT Series Display flashes when a call

terminates to the terminal. Lamp lights steadily when a

message has been left.

(3) LCD (Note 1)

LCD (Liquid Crystal Display) provides DT Series activity

information plus data, time and Soft Key Operation.

The LCD on DT310/DT710 has 24-character, 3-line

capability.

4:26 PM TUE 12 FEB 2008

MIC VOICE >>>

The LCD on DT330/730 has 24-character, 4-line capability.

Top line is used exclusively for the status icons.

4:26 PM TUE 12 FEB 2008

MIC VOICE >>>

(4) Exit

The user can exit from the Help key mode by pressing this key

11

(5) Soft Keys

Any feature shown at the bottom of the LCD is available. The

appropriate feature key is displayed on the screen according to

the call handling process.

(6) Help

Explanations of the Soft Keys can be called up on the LCD by

pressing this key.

(7) 8LD Display

32 (8 keys x 4 pages) additional programmable keys are

provided. They can be programmed as Flexible

Line/Programmable feature key by Telephony Server

Administrator, similar to existing programmable keys. When

Telephony Server Administrator sets “One-Touch Speed

Dial key” on the programmable keys, users can assign any

numbers (ex. Telephone number, etc.) to the key (up to 8

digits).

* Maximum 8 characters can be displayed.

** The users can change the name displayed on the LCD. For

the operating procedure, refer to To Register Name On One-

Touch Speed Dial key.

*** For the assignment of the keys, confirm to the Telephony

Server Administrator.

(a) Icon

Status of the Line key such as Call termination, Call Hold or

Busy, and setting on the Feature key are shown as Icons.

User’s Status Icon

Flashing

Pattern

Idle

 Call Hold (Individual Hold on Call

Park Group)

 Exclusive Call Hol

Blink

Note

 Recall (Individual Hold/Exclusive

Call Hold/Call Transfer/

 Individual Hold on Call Park Group)

Blink

Note

 During Conversation (Individual

Use)

 Call Transfer

 Conference

12

(b) Feature Key Information

Feature Key Information displays the followings.

Key

Description

Maximum

digits to be

displayed

Line Key

- Name and Number

information

Up to 8 digits.

Feature Key

- Feature Name

Up to 8 digits.

One-Touch

Speed Dial Key

- Speed Dial Name

Information

- Number Information

Up to 6 digits.

(c) Page Icon

8LD display has four pages (8 Programmable Feature keys

per page). Page Icon Key indicates currently displayed page.

The user can switch the Feature Key display from page 1 to 4

by using the Page Switching Key.

Note 3: The icon flashes during events such as call

termination to a line key or call back.

Example:

(8) Programmable Keys

These keys can be programmed as Flexible Line key/

Programmable Feature Key by Telephony Server

Administrator.

When Telephony Server Administrator sets “Speed Dial key”

on the programmable keys,

users can assign any numbers (ex. Telephone

13

number, etc.) to the key (up to 24 digits).

* For the assignment of the keys, confirm to the

Telephony Server Administrator.

Following picture shows LCD indication of Programmable keys.

Appropriate icons are displayed according to the using feature.

These displays cannot be changed by user.

Following pictures shows each LCD indication

when Speed Dial key is set to Programmable key. Following

picture shows the indication of each status.

When Station line/Trunk line are assigned.

No icons are displayed.

* Users can register name on each Speed Dial key. For the

procedures, refer to To Register Name On Speed Dial key.

When any features using feature access code are

assigned.

Icons turn black.

* Users can register name on each One-Touch

Speed Dial key. For the procedures, refer to To

Register Name On Speed Dial key.

(9) Scroll Key

This key is used to turn over the page of 8LD display.

(10)Recall

Press key to finish the call and hear the dial tone.

(11)Feature

Used to activate any features as terminal setup

functions, etc. and to program Speed Dial Keys.

14

(12) Answer

When LED on this key is lit, press key to answer a waiting

call.

(13) Mic

Press key to respond hands free. LED on this key lights

during speakerphone operation.

(14) Menu

From this key, the user can access to the functions not

normally used easily.

(15) Cursor

By using this Key, DT Series user can access to various

features with simple operation.

Two lines of menu items can be displayed at a

time. Use "Up" or "Down" key to scroll the item.

Note: DT310/710 (2-Button without LCD) does not have the

Cursor Key.

(16) Enter

DT330/DT730 Series has Shortcut Menu for frequently-

used features. The user can access to Shortcut Menu by

pressing Enter Key.

Note:

DT310/710 Series does not support the Shortcut Menu.

Shortcut Menu includes the following features.

Feature Description

1. Missed Call Access to history of Missed Call

2. Voice Mail Access to history of incoming Voice Mail.

15

Feature Description

3. IM Not supported.

4. Presence

Not supported.

5. .Bluetooth

Not supported.

(17) Speaker

Controls the built-in speaker which can be used for

Hands Free dialing/monitoring.

LED on key lights when key is active.

(18)Transfer

Allows the station user to transfer established calls

to another station, without attendant assistance.

(19)Hold

Press this key to place an internal or external call

on hold.

16

• ICON DISPLAY

The LCD of DT730 Series displays Desktop Icons

which provide notification when events (such as missed

call and voice mail) occur.

Note: DT310/DT330/DT710 Series does not support

the icon display.

Note 1: Currently unavailable.

17

• Menu List

From the Menu List, the user can use various

application features such as Directory and Call History.

To Display Menu List

No.

Menu

Item Description

1 Call

History

To view Call History. For details, see

Chapter 7 CALL HISTORY OPERATION.

2 Directory To use Directory function. For details,

see Chapter 6. DIRECTORY

OPERATION.

3 Tool - Uses when accessing external XML

server. For details, please contact the

system administrator.

- Uses when sending/receiving Instant

Message. (Note1)

4 Call

Function

Currently Not Used (grayed out).

5 Setting To set up the terminal such as ringing

volume control, LCD display setting and

download of Music on Hold.

6 Precense Currently Not Used (grayed out).

# Favorite By registering frequently-used features

as favorite, the user can these features

with simple operation.

0 Terminal

Config

This item is used for Configuration

setting of DT Series.

Note 1: Operation for Instant Message (IM) is currently

unavailable.

Note: Unavailable Menu items are grayed out.

• Simple Operation By Menu Key and Cursor Key

By using Menu Key and Cursor Key, DT Series user can

access to Call History, Directory and terminal settings with

simple operation.

As an example, the following shows the operations how to

access to Directory menu.

18

2. TERMINAL SETUP

This chapter describes operating procedures for

terminal settings by the UP/Down Key and Feature

Keys.

Various terminal settings such as display, sounds,

password, and language are also available from Menu

Key. For detailed information on terminal settings from

Menu Key, see SV7000 IP Peripheral Guide.

Terminal Setup with the Up/Down Key

To Adjust Handset Receiver Volume

Press the Up/Down key in the off-hook status or during

the call.

To Adjust Speaker Volume

Press the Up/Down key during speakerphone operation

or during the call.

To Adjust Ringer Tone

Press the Up/Down key during ringing.

To Adjust LCD Contrast

Press the Up/Down key in the on-hook status.

Note: When the terminal is connected with 16LD ADM, 16 degrees

of LCD contrast are available (8 degrees in terminal side and 2

degrees in ADM itself). (In Expansion mode only, Link motion)

La pagina sta caricando ...

NEC DT700 Series Manuale utente

Questo manuale è adatto anche per

NEC DT700 Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti