Clearaudio Master Innovation Manuale utente
- Categoria
- Giradischi audio
- Tipo
- Manuale utente
User manual
© clearaudio electronic GmbH, 2022-11 Made in Germany
Master Innovation
Master Innovation Black
Picture with:
Clearaudio tonearm „Universal“
and clearaudio cartridge
„Goldnger Statement“.
Master Innovation Wood
Picutre with:
Clearaudio tonearm „TT1 MI“
and Clearaudio cartridge
„Goldnge Statement“.
Pic. similar
User manual
Page 2 © clearaudio electronic GmbH, 2022-11
Dear Clearaudio customer,
Congratulations on your purchase of the
Master Innovation
turntable, a world class turntable
handmade in Germany by Clearaudio electronic GmbH.
The
Master Innovation’s
state-of-the-art combination of a no-contact magnetic drive, frictionless
Ceramic Magnetic Bearing and self-regulating, sensor-controlled Optical Speed Control guarantees
incredible pitch stability and freedom from noise leading to unbelievably realistic musical reproduction.
Its resonance minimizing chassis construction comprises four layers of a complex ‚sandwich‘ of
aluminium – Panzerholz bullet-proof wood – aluminium, and includes provision for up to three
tonearms, allowing for complete exibility of tonearm and cartridge.
Please note that this instruction manual contains a brief overview to enable quick and easy setup.
A fuller instruction manual will be sent out in due course.
We wish you a great deal of musical enjoyment with your new Clearaudio
Master Innovation
turntable.
Clearaudio electronic GmbH
User manual
Made in Germany Page 3
Safety instructions
1. General information
Check the turntable for any damage before using it. Do not connect the turntable if damaged!
Never connect the turntable if it has been dropped or gotten wet, contact your dealer to have the turntable checked.
Never expose the turntable to rain or moisture.
Never touch the power cord of the device with wet hands.
Regular visual inspections for defective insulation on the connection cable are also recommended for your own safety.
A damaged cable should be replaced immediately by a specialist!
Never pull on the power cord to unplug the device. Always pull directly on the plug!
The inside of the turntable is maintenance free. Never open the case or attempt to repair the unit yourself, since this
can lead to loss of warranty!
We recommend disconnecting the power supply from the mains if you do not operate the device for a longer period of
time.
The turntable does not feature an automatic shut-o mechanism.
Therefore, as soon as the stylus has reached the run-out groove, engage the tonearm lift and switch the turntable o.
Not suitable for children! Scope of delivery may contain small parts that can be swallowed.
2. Intended use
The
Master Innovation
is a turntable for playing records.
The intended use of the
Master Innovation
in accordance with the information provided in the user manual only.
The power supply may only be operated with maximum permissible connection values according to the technical data.
Any other use or modication of this product is not intended.
3. Location of installation
Avoid locations with direct sunlight, temperature uctuations and high humidity.
Likewise, avoid placing electronic devices near heaters, heat lamps, or other devices that produce heat.
The device is designed for operation at room temperature.
No objects with an open ame may be placed on or near the device (burning candles or similar).
4. Overload
The product is designed to comply with all necessary safety regulations. However, you should not leave the device
unattended under extreme loads.
5. Maintenance
Never use agressive cleaning detergent.
Do not use dry cloths for cleaning as this generates static electricity. Suitable cleaning and care products from Clearaudio
are available from www.analogshop.de or from specialist retailers.
The bearing of the turntable platter can be lubricated every 2 years with the oil provided.
Put 1 or 2 drops of the oil into the bearing for lubrication.
User manual
Page 4 © clearaudio electronic GmbH, 2022-11
6. Health information
Permanently high volume can lead to various types of hearing damage. Use high volume responsibly!
7. Service
The
Master Innovation
turntable should be repaired during the guarantee period by the manufacturer only, otherwise
the warranty claim expires. All Clearaudio products should only be serviced by specialist retailers.
If, despite the high production standard, a service is necessary, the
Master Innovation
turntable must be send to
Clearaudio through your dealer.
8. Transport
Use the original packing material for further transportation of the
Master Innovation
turntable, otherwise serious damage
could occur.
Be sure to pack the device exactly as it was shipped.
Safe transport is only guaranteed in the original packaging.
Proceed in reverse as described for assembly when packing.
Always remove the turntable platter and replace the foam securing the sub-platter and cover the bearing with tape as
well. Otherwise serious damage can occur.
Remove also the pulley from the motor axle to avoid any damage during transport.
Clearaudio assumes no liability for any damage that may occur due to incorrect packing.
9. Disposal
Do not dispose this product together with other waste.
WEEE Reg. No.: DE26004446
10. CE Marking
This electronic product corresponds to the applicable guidelines for obtaining the CE mark.
User manual
Made in Germany Page 5
Contents
1. Packing overview ......................................................................6
2. List of components ....................................................................7 - 8
3. Installation and setup ...............................................................9 - 16
4. Fine adjustment of the motor ...................................................17
5. Troubleshooting ........................................................................18 - 19
6. Technical data ..........................................................................20
Warranty information ...................................................................21 - 22
Stroboscope test record user manual ...........................................23 - 24
User manual
Page 6 © clearaudio electronic GmbH, 2022-11
1. Packing overview
Pic. 1: Packing overview
Accessories,
user manual,
warranty card,
Clearaudio quality
card, Stroboscope
Test Record
Master Innovation
turntable chassis
including mounted
lower bearing part
and integrated motor
unit;
optional tonearm
Stainless steel
subplatter with scale
ring, Delrin or acrylic
platter; optional
power supply;
cartridge; drive
bearing
Carton 2 of 3:
pre-mounted drive
unit
Carton 3 of 3
(not pictured):
stainless steel
sub-platter and
platter
User manual
Made in Germany Page 7
2. List of components
Clearaudio’s special secure packaging for your
Master Innovation
turntable ensures safe
transportation. Please keep this original packaging, in case you need to transport or ship the turntable
at any point in the future.
Clearaudio
Master Innovation
components list:
Pic. 2: List of Components
12
3 4
56
1. Drive unit 5. Drive bearing with ceramic ball
2. Top unit with pre-mounted
tonearm base (carton 2 of 3)
6. Power supply
3. Stainless steel sub-platter 7. 3 x at pads
4. 28mm Delrin or acrylic turntable
platter
7
User manual
Page 8 © clearaudio electronic GmbH, 2022-11
8 9 10
11 12 13
14 15 16
8. 1 pair of white gloves 14. 2x Bearing oil for occasional use
9. Grounding wire (to connect to the
underside of the bearing part)
15. Clearaudio
Smart Stylus Gauge
10. Level gauge for turntable align-
ment 16. Clearaudio
Stroboscope Test Record
(Art. No. AC038) to adjust the exact speed
11. 2 pcs. Flat belts 17. Not shown:
User manual, warranty card, Clearaudio
quality certicate card, sales return paper
12. 4 hex keys; sizes: #2.5 / 3 / 7 / 8 18. Not shown: stainless steel sub-platter and
platter (carton 3 of 3)
13. Screwdriver 19.
Pic. 2.1: List of components
IMPORTANT NOTICE: Please double check the tightness of all bolts, hardware and mounting
pods, as temperature uctuations during transit may have caused the hardware to become loose.
User manual
Made in Germany Page 9
3. Installation and setup
The setup of the
Master Innovation
turntable is easy as the turntable chassis is pre-assembled and
has been tested at the factory.
Please use the white gloves enclosed in order to avoid scratches or unwanted ngerprints (platter).
The
Master Innovation
turntable requires a setup space of at least 18.90 x 19.29 inches.
18.90 inches
480mm
19.29 inches / 490mm
Pic. 3: Required setup space
User manual
Page 10 © clearaudio electronic GmbH, 2022-11
Carton 1 of 3:
1.)
First, take out the three black at pads from the accessory bag. Place these at pads on your hi-
rack or another suitable base, where the nal position of your
Master Innovation
turntable will be.
2.)
Then take the
Master Innovation
turntable body (drive unit) from the next packaging layer and place
the turntable’s spikes onto the at pads.
Pic. 4:
Master Innovation
drive unit
3.)
To avoid humming noises it may be necessary to ground the bearing. To do so, plug the ground
cable provided into the hole in the bearing xing bolt on the underside of the turntable.
Pic. 5: Grounding the bearing
4.)
Remove the protective security tape from the bearing housing.
User manual
Made in Germany Page 11
5.)
Take the drive bearing out of the box. Please remove the bearing protection lm carefully and apply
2-3 drops of the bearing oil (provided, and also available at www.analogshop.de).
Carefully place the bearing onto the bearing axis.
6.)
Remove the protection lm from the sensor mounted on the turntable chassis.
Please do so extremely carefully to avoid introducing any dirt or scratches.
Carefully take the stainless steel platter out of the box, using both hands. Remove the protection
lm from the scale ring on the lower side of the turntable. The lower platter side with the scale ring
must be face down when placing it on the bearing.
Again, please remove the lamination extremely carefully to avoid introducing any dirt
or scratches.
Pic. 6: Setup of the bearing
Pic. 8: Montage of the sub-platter with the scale ring
Pic. 7: Setup of the bearing
User manual
Page 12 © clearaudio electronic GmbH, 2022-11
7.)
Take the drive platter out of the box and remove the protective lm. Using both hands, place the
drive unit platter onto the bearing, so that the magnets are showing on the top. Please be very
careful.
Pic. 9: Placing the drive unit platter onto the bearing
8.)
Place one of the two drive belts provided (the second is a spare) around the platter and around the
motor pulley.
Pic. 10: Placement of the drive belt
User manual
Made in Germany Page 13
Pic. 11: Placement of the top unit
9.)
Carefully take the top unit from carton 2 of 3 and place it onto the drive unit. Make sure that the
protective lm of the top unit is still xed between the platter and the chassis to avoid damage.
Please note that the centring pins will easily slide into the threaded hole without jamming.
Pic. 12: Top unit in place
Centering pins for
sliding into the
threaded hole.
Centering pins for
sliding into the
threaded hole.
User manual
Page 14 © clearaudio electronic GmbH, 2022-11
10.)
Take the stainless steel sub-platter from carton 3 and remove the protective packaging.
Place the platter with the small deepening showing down carefully onto the upper part of the
bearing. Make sure that the protective lm is still xed in place at this point.
Next, take the platter out of its box and set it carefully with the metal disc down onto the bearing.
Now you can carefully remove the protective lm.
For this purpose press the platter slightly downwards.
To avoid any damage to your bearing, the platter should be at room temperature before beginning
setup (approx. 20° Celsius).
Please avoid any sideways force to avoid any damage to the ceramic bearing.
Pic. 11a: Setting up the stainless steel platter Pic. 11b: Setting up the platter
Pic. 12: Setup nished
You can nd various turntable adjustment accessories at www.clearaudio.de or
www.analogshop.de.
User manual
Made in Germany Page 15
11.)
To install the tonearm, please see the relevant manufacturer’s user manual for that tonearm.
12.)
To mount and adjust a cartridge, please follow the relevant manufacturer’s user manual for that
cartridge.
If you have purchased your Clearaudio
Master Innovation
turntable as a package with tonearm
and cartridge, you will nd a
Smart Level Gauge
in your accessories pack, which will help you to
adjust the tracking force of the cartridge:
✓
tracking force too high!
tracking force too low!
This position of the diamond
correlates to a tracking force of
20mN (2.0g).
Pic. 13: Using the Smart Stylus Gauge
User manual
Page 16 © clearaudio electronic GmbH, 2022-11
13.)
The following nal adjustment is very important.
Please ensure that your turntable rack is in a level position.
Please use the level gauge provided to ensure that your
Master Innovation
turntable is in a level
position. You can adjust each of the turntable’s feet to level the turntable. You will only get the best
results with your
Master Innovation
turntable if it is level.
Pic. 14a: Alignment of the turntable
Pic. 14b: Adjustment of the turntable feet
14.)
Please connect the mains plug to your power supply.
15).
By pushing the sensor switch, marked with “33 1/3” on
the motor, the turntable starts to spin until 33 1/3rpm is
reached.
After the initial setup, we recommend a running in period
to ensure the perfect performance.
To do this let the turntable spin at 33 1/3rpm for 15 to 30
minutes.
Pic. 15: Connection of power supply and motor
User manual
Made in Germany Page 17
4. Fine adjustment of the motor
1.)
The
Master Innovation’s
motor adjustment is already pre-set at the factory. However, some small
speed deviations can occur during transportation or due to dirt or dust on the sensor or the sensor
ring. Please check the speed before using the turntable for the rst time.
To correctly adjust the speed, put the recommended Clearaudio
Stroboscope Test Record
onto the
platter and refer to the instructions provided in the
Stroboscope Test Record
user manual.
To check the speed with highest accuracy, you may wish to use the Clearaudio
Speed Light
(Art. No.: AC039, available at www.analogshop.de).
On the right front side of your turntable there are three ne speed adjusters (see Picture 16 below).
- Left adjuster = setting 33 1/3rpm
(near turntable motor)
- Middle adjuster = setting 45rpm
- Right adjuster = setting 78rpm
(near turntable bearing)
Pic. 16: Fine adjustment of the motor
To adjust the turntable speed at 33 1/3 rpm, take the screwdriver provided and turn the left adjuster
until you have reached the right speed according to the
Stroboscope test record
(see the relevant
user manual).
• Turning the adjuster counter clockwise reduces the turntable speed.
• Turning the adjuster clockwise increases the turntable speed.
You can also adjust the turntable speed for 45rpm and 78rpm in the same way.
Please note:
If the turntable does not reach the correct speed, the sensor or the scale ring could be dirty or
dusty. To clean the sensor, take o the two platters very carefully. Clean the sensor and the scale
ring with a little isopropyl alcohol and a cotton bud. Be very careful to avoid scratching the sensor
or the scale ring.
Should the motor still have speed variations, please contact Clearaudio directly or you’re nearest
authorized Clearaudio dealer.
Now you are ready to play your vinyl records.
We wish you a great deal of pleasure with your new
Master Innovation
turntable.
User manual
Page 18 © clearaudio electronic GmbH, 2022-11
5. Troubleshooting
If you have a problem with your
Master Innovation
turntable, rst check the possible causes to rule
out incorrect operation.
If the error persists, please contact your dealer!
Never try to open the device and/or repair it yourself, this will void the warranty!
Error Cause Measure
Device does not
work Is the power cord plugged in? Check the connection.
No sound
The tonearm and phono stage
are not properly connected. Check the cable connection between the tonearm
and the phono stage.
Is the amp turned on? Check the power supply to the amplier.
The volume on the amplier/
loudspeaker is set too low or on
„mute“.
Check the volume settings.
Is the cartridge protective cap
still attached? Remove the cartridge‘s protective cap.
Is the tonearm in the raised
position? Lower the tonearm into the lead-in groove.
Is the stylus damaged? Check the stylus and have the cartridge checked
by a specialist if necessary.
Bad sound /
noise
Is the record or the stylus dirty or
damaged? Clean the record / or the cartridge. Clearaudio
oers many helpful accessories for care and
cleaning. In the event of damage, we recommend
an assessment by a specialist and, if necessary,
an exchange.
Is the cartridge properly mounted
into the tonearm? Check the installation using the relevant user
manual and correct them if necessary.
Has the tracking force been set
too high? Adjust the tracking force.
Is the correct operating mode
(MM / MC) set on the amplier? Check the settings of your phono stage.
The pre/amp does not have
enough gain. Check the settings of your phono stage.
Pre/amp is mismatched. Swap the plugs of the turntable that are connected
to the left and right outputs.
User manual
Made in Germany Page 19
Needle bounces
or slides across
record
Is the record or the stylus dirty
or damaged? Clean the record / or the cartridge. Clearaudio
oers many helpful accessories for care and
cleaning. In the event of damage, we recommend
an assessment by a specialist and, if necessary,
an exchange.
Has the tracking force been set
too high? Adjust the tracking force.
Is the record deformed or
scratched? Use a record clamp or replace the record.
Is the turntable level? Check the alignment of the turntable and adjust
if necessary.
Platter does not
turn
Is the drive belt properly
attached? Check the position of the drive belt.
Is the power cord connected
properly? Check the connection.
No speed was selected / speed
selection in position „0“/“OFF“. Select a speed and start the turntable.
Noisy sound Is the drive belt properly
attached? Check the position of the drive belt.
Is it too loose and needs to be changed?
Humming noises
Contact problems with the signal
connections (e.g. cinch plugs,
adapters for extensions)
Check all connections; reduce the level on the
(pre-)amplier to a low volume for acoustic
checking of gross errors.
Metal housing acts as an
antenna and catches hum. It can be helpful for conductivity to connect the
metal parts of the turntable to the ground of
the (phono) preamplier. The turntable provides
a grounding terminal for this purpose. Use a
suciently thick wire to establish the ground
connection.
The pickup pins are mixed up, not
connected correctly or defective. Check the pin assignment of the pickup.
The music doesn‘t
sound like
usual
Wrong speed selected. Check the record for recommended speed.
There are also records in LP format (30 cm) that
have to be played at 45 rpm (“maxi singles”) and
small records in single format (17 cm) that have to
be played at 33 rpm (so-called “ EP‘s“).
The turntable is spinning too
fast/too slow. Adjust the speed according to the operating
instructions.
User manual
Page 20 © clearaudio electronic GmbH, 2022-11
6. Technical data
Construction details: • Resonance-optimised chassis shape
• Made of bullet proof wood and aluminium with precision
CNC machined surface
• All turntable feet are nely adjustable
• Playback with three tonearms possible
Speed options: 33 ⅓, 45, 78rpm
Drive unit: • High torque 24V DC motor exclusively made for
Clearaudio; Optical Speed Control (OSC) in real time
through infrared sensor
• Decoupled DC motor in chassis; resonance damping
device; belt-driven
• Magnetic decoupling of turntable and addtional drive
platter
Bearing: • Clearaudio patented ceramic magnetic bearing (CMB) in
main platter / upper drive platter assembly
• Inverted bearing in lower drive platter"
Platter: 70mm / 2.75 inch main platter, made out of synthetic
material with high-density and excellent dimension stability
// precision CNC machined surface, solid stainless steel sub-
platter, dynamically balanced
Speed accuracy (measured): < ± 0.05%
Power consumption: Max. consumption: 9.5 watts
Consumption in operation: 4.1 watts
Standby mode: 2.4 watts
O mode: 0.0 watts
Total weight: Approx. 60kg
(without tonearm and power supply)
Dimensions (W/D/H): Approx. 18.11 x 19.09 x 15.59 inches
(with tonearm base, without tonearm)
Dimensions (W/D/H): Approx. 460 x 485 x 396mm
(with tonearm base, without tonearm)
Manufacturer’s warranty: 5 years*
* Provided that the warranty card is correctly completed and returned to Clearaudio, or your product is registered
online at https://clearaudio.de/en/service/registration.php, within 14 days of purchase.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Clearaudio Master Innovation Manuale utente
- Categoria
- Giradischi audio
- Tipo
- Manuale utente
in altre lingue
Documenti correlati
-
Clearaudio INNOVATION Manuale utente
-
Clearaudio Ovation Silver Manuale utente
-
Clearaudio Electronic GmbH Statement Phono Manuale utente
-
Clearaudio 24v Manuale utente
-
Clearaudio concept mc / concept mc Signature Manuale utente
-
Clearaudio CONCEPT MC Manuale utente
-
Clearaudio Clarify Manuale utente
-
Clearaudio SATISFY Manuale utente
-
Clearaudio Unify Manuale utente
