Pioneer DDJ-RZX Guida Rapida

Marca: Pioneer

Modello: DDJ-RZX

Categoria: Mixer audio

Tipo: Guida Rapida

DDJ-RZX

РусскийPortuguêsEspañol

Français Deutsch ItalianoEnglish

Nederlands

http://pioneerdj.com/support/

http://rekordbox.com/

Operating Instructions (Quick Start Guide)

Mode d’emploi (Guide de démarrage rapide)

Bedienungsanleitung (Kurzanleitung)

Istruzioni per l’uso (Guida di avvio veloce)

Handleiding (Snelstartgids)

Manual de instrucciones (Guía de inicio rápido)

Manual de instruções (Guia de início rápido)

Инструкции по эксплуатации

(Краткое руководство пользователя)

DJ Controller

Contrôleur pour DJ

DJ Controller

Controlador DJ

Controlador para DJ

For FAQs and other support information for this product, visit the above site.

Pour les FAQ et autres informations de support sur ce produit, consultez le site ci-dessus.

Häufig gestellte Fragen und weitere Support-Informationen für dieses Produkt finden Sie auf der oben

genannten Seite.

Per la sezione FAQ e altre informazioni di supporto per questo prodotto, visitare il sito indicato sopra.

Bezoek de bovenstaande website voor vaak gestelde vragen en andere informatie over ondersteuning voor dit

product.

Para consultar las preguntas más frecuentes y otras informaciones de asistencia para este producto, visite el

sitio indicado anteriormente.

Para obter informações sobre as FAQs e outras informações de apoio relativas a este produto, consulte o site

indicado acima.

Ответы на часто задаваемые вопросы и другую дополнительную информацию о данном изделии см.

на указанном выше сайте.

For Europe

CAUTION

TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER

-SERVICEABLE

RTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

D3-4-2-1-1_B1_En

WARNING

This equipment is not waterproof

. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture

D3-4-2-1-3_A1_En

WARNING

This product equipped with a three-wire grounding

(earthed) plug - a plug that has a third (grounding) pi

This plug only fits a grounding-type power outlet. If you

are unable to insert the plug into an outlet, contact a

licensed electrician to replace the outlet with a properly

grounded one. Do not defeat the safety purpose of the

grounding plug.

D3-4-2-1-6_A1_En

D3-4-2-1-6b_A1_En

Laite on liitettävä suojamaadoituskoskettimilla

varustettuun pistorasiaan

For Finland customers

For Norway customers

For Sweden customers

Apparatet må tilkoples jordet stikkontakt

Apparaten skall anslutas till jordat uttag

WARNING

prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

D3-4-2-1-7a_A1_En

Operating Environment

Operating environment temperature and humidity:

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light).

D3-4-2-1-7c*_A2_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat radiation

(at least 5 cm at top, 5 cm at rear

, and 5 cm at each

side)

D3-4-2-1-7d*_A1_En

CAUTION

The switch on this unit will not completely shut off

all power from the AC outlet. Since the power cord

serves as the main disconnect device for the unit,

you will need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit has

been installed so that the power cord can be easily

unplugged from the AC outlet in case of an accident.

To avoid fire hazard, the power cord should also be

unplugged from the AC outlet when left unused for a

long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

WARNING

Store small parts out of the reach of children and

infants. If accidentally swallowed, contact a doctor

immediately

D41-6-4_A1_En

If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used

electronic products in accordance with legislation that requires proper treatment, recovery and recycling.

rivate households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to

designated collection facilities or to a retailer (if you purchase a similar new one).

r countries not mentioned above, please contact your local authorities for the correct method of disposal.

By doing so you will ensure that your disposed product undergoes the necessar

y treatment, recovery and recycling and thus prevent potential

negative effects on the environment and human health.

K058b_A1_En

POWER-CORD CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest service center or your

dealer for a replacement.

S002*_A1_En

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

D8-10-1-2_A1_En

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

D8-10-2_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: DJ Controller

Model Number: DDJ-RZX

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

For other areas

English

Before start

How to read this manual

! Thank you for buying this Pioneer DJ product.

This guide provides a brief description of the procedures up until

connecting the unit to your computer and outputting audio. For the

detailed procedures, refer to the operating instructions.

Be sure to read both this leaflet and the operating instructions! Both

documents include important information that you must understand

before using this product.

After you have finished reading the instructions, put them away in a

safe place for future reference.

! In this manual, names of menus displayed on the product and on

the computer screen, as well as names of buttons and terminals,

etc., are indicated within brackets. (E.g.: [File], [CUE] button, and

[PHONES] output terminals)

! Please note that the screens and specifications of the software

described in this manual as well as the external appearance and

specifications of the hardware are currently under development and

may differ from the final specifications.

! Please note that depending on the operating system version, web

browser settings, etc., operation may differ from the procedures

described in this manual.

Features

This unit is an all-in-one DJ controller designed specifically for rekord-

box dj. It’s interfaces incorporating various controls such as “DISPLAY”,

“BIGJOG”, “PERFORMANCE PADS” and 4-channel mixer are positioned

with room to spare to allow for more individualistic DJ performances

using rekordbox dj.

Also, the unit provides “SOUND COLOR FX” and “OSC SAMPLER” func-

tions so that original arrangements can be added to the music being

played back.

Furthermore, numerous input and output terminals support a variety

of DJ styles. Featuring aluminum material for the top panel, the design

makes the unit look high quality, which is appropriate in a variety of

scenes such as nightclubs, home parties, etc.

What’s in the box

! Power cord

! USB cable

! Warranty (for some regions only)

! Operating Instructions (Quick Start Guide) (This document)

! Software license notice

! rekordbox dj license key card

! rekordbox dvs license key card

! rekordbox video license key card

1 Only one USB cable is included with this unit.

To connect two units, use a cable conforming to USB 2.0 standards.

2 The included warranty is for the European region.

Cautions

The license key cannot be reissued. Be careful not to lose it.

Viewing the manuals

Viewing this unit’s Operating

Instructions

1 Launch a web browser on the computer and access

the Pioneer DJ site below.

http://www.pioneerdj.com/

2 Click [Support].

3 Click [FIND TUTORIAL & MANUALS].

4 Click [DDJ-RZX] in the [CONTROLLER] category.

5 Click the required language from the Operating

Instructions list.

Download as necessary.

Viewing the Operating Instructions of

rekordbox

1 Launch a web browser on the computer and access

the rekordbox.com site below.

http://rekordbox.com/

2 Click [Support].

3 Click [Manual].

4 Click the required language of the manual.

English

About rekordbox

! rekordbox

rekordbox is a composite software that enables track management

and DJ performances.

! rekordbox dj

The DJ performance function of rekordbox is called rekordbox dj.

Enter the license key shown on the rekordbox dj license key card

included with this product to use rekordbox dj.

! rekordbox dvs

The DVS function, which is a function that can be added to rekord-

box dj to perform deck operations using control signals played with

CDJ or a turntable, is called rekordbox dvs. Entering the license key

shown on the license key card included with this product allows this

function to be added to rekordbox dj.

! rekordbox video

This is a video function that called rekordbox video that can be added

to rekordbox dj, and provides playback of video and image files, and

performance. Entering the license key shown on the license key card

included with this product allows rekordbox dj to be added to this

function.

Minimum operating environment

Supported

operating systems

CPU and required memory

Mac OS X:

10.11/10.10/10.9 (latest

update)

Intel

processor Core™ i5 2.5 GHz or better

8 GB or more of RAM

Windows: Windows 10,

Windows 8.1, Windows

8.1 Pro (latest service

pack), Windows 7 Home

Premium, Professional,

Ultimate (latest service

pack)

Intel

processor Core™ i5 2.5 GHz or better

8 GB or more of RAM

Others

USB port

A USB 2.0 port is required to connect the computer

with this unit.

Display resolution Resolution of 1280 x 768 or greater

Internet connection

An Internet connection is required for registering the

rekordbox user account and downloading the software.

! rekordbox is compatible with 64-bit operating systems (Windows/Mac) only.

! For information on the latest system requirements, compatibility, and supported

operating systems of rekordbox, see [System Requirements] on the rekordbox.

com site below.

http://rekordbox.com/

! Operation is not guaranteed on all computers, even if all the required operating

environment conditions indicated here are fulfilled.

! Depending on the computer’s power-saving settings, etc., the CPU and hard

disk may not provide sufficient processing capabilities. For notebook comput-

ers in particular, make sure the computer is in the proper conditions to provide

constant high performance (for example by keeping the AC power connected)

when using rekordbox.

! Use of the Internet requires a separate contract with a provider offering Internet

services and payment of provider fees.

! Use the latest version/service pack of the operating system.

Installing the application

Installing rekordbox

1 Access rekordbox.com.

https://rekordbox.com/en/store/

! The page content is subject to change without notice.

2 Check the Get Started guide and then click [Free to

Download].

3 Carefully read the Software End User License

Agreement and select the [Agree] check box if you

agree.

When you select the check box, [Download] becomes clickable.

4 Click [Download].

Downloading of rekordbox starts.

5 Double-click the downloaded file to unzip it.

6 Double-click the unzipped file to launch the installer.

7 Carefully read the Software End User License

Agreement, and continue with the installation according

to the instructions on the screen if you agree.

! If you do not agree to the contents of the Software End User

License Agreement, cancel the installation.

8 When the installation completion screen appears,

follow the instructions on the screen to close the

installer.

The installation is now complete.

! To use rekordbox dj, rekordbox dvs, and rekordbox video, activation

(license authentication) is required. For details, see the rekordbox

Operating Instructions.

https://rekordbox.com/en/support/manual.php

Names of Parts

For details on the functions of the various buttons and controls, see Part names and functions in the Operating Instructions.

BPM DOWN

BPM UP

1 Browser section

2 Deck section

3 Mixer section

4 Effect section

5 Display section (deck)

6 Display section (mixer)

Browser section

1 5

1 Rotary selector

2 BACK button

3 TAG TRACK button

4 LOAD button

5 UTILITY button

Display section (deck)

1 VIEW (PAD INFO / DECK VIDEO) button

2 TRACK INFO button

3 TIME MODE button

4 COMBO FX button

5 SAMPLER REPEAT button

6 Touch display (deck)

Display section (mixer)

2 4

1 VIEW (WAVEFORM / MASTER VIDEO) button

2 2DECK/4DECK button

3 SOUND COLOR FX SINGLE MODE button

4 SOUND COLOR FX MULTI MODE button

5 Touch display (mixer)

English

Deck section

This section is used to control the four decks. The buttons and controls for operating decks 1 and 3 are located on the left side of the controller, those

for operating decks 2 and 4 are located on the right side of the controller.

1 Jog dial display section

2 Jog dial

3 JOG FEELING ADJUST control

4 VINYL SPEED ADJUST control

5 JOG MODE button

6 MASTER TEMPO button

7 Takeover indicator

8 TEMPO RESET button and TEMPO RESET indicator

9 TEMPO slider

a AUTO BEAT LOOP button

b LOOP 1/2X button

c LOOP 2X button

d LOOP IN button

e LOOP OUT button

f PARAMETERc button, PARAMETERd button

g SEQUENCER START button

h SEQUENCER OVERDUB button

i HOT CUE mode button

j PAD FX1 mode button

k SLICER mode button

l SAMPLER mode button

m CAPTURE button

n Performance pads

o PLAY/PAUSE f button

p CUE button

q QUANTIZE button

r SYNC button

s MASTER button

t SHIFT button

u SLIP button

v DECK 3 button

w DECK 1 button

x DIRECION FWD REV lever

y REV indicator

z GRID SLIDE button

A GRID ADJUST button

Mixer section

BPM DOWN

BPM UP

2 2 2 23 4 3 4

BO B B B

AN A A A

C C

1 OFF, ON, TALK OVER selector switch

2 USB connection indicator

3 USB (A) button

4 USB (B) button

5 MASTER LEVEL control

6 MASTER BALANCE control

7 BOOTH MONITOR control

8 Master level indicator

9 MASTER OUT COLOR control

a MASTER CUE button

b OSC SAMPLER SELECT button

c OSC SAMPLER VOLUME control

d OSC SAMPLER PARAMETER control

e OSC SAMPLER SOURCE selector switch

f EQ CURVE selector switch

g CHANNEL FADER CURVE selector switch

h CROSS FADER CURVE selector switch

i HEADPHONES LEVEL control

j HEADPHONES MIXING control

k HEADPHONE MONO SPLIT / STEREO selector switch

l SOUND COLOR FX PARAMETER control

m SOUND COLOR FX SELECT buttons

n MIC FX PARAMETER control

o MIC FX SELECT button

p MIC EQ (HI, MID, LOW) controls

q MIC2 control

r MIC1 control

s CD, USB selector switch

t LINE, PHONO, USB selector switch

u FX 1 assign button

v FX 2 assign button

w Channel Level Indicator

x TRIM control

y ISO/EQ (HI, MID, LOW) controls

z COLOR control

A Headphones CUE button

B Channel fader

C Crossfader assign selector switch

D Crossfader

E SAMPLER CH FX 1 assign button

F SAMPLER CH FX 2 assign button

G SAMPLER CH USB (A) button

H SAMPLER CH USB (B) button

I SAMPLER SYNC button

J SAMPLER MASTER button

K SAMPLER QUANTIZE button

L SAMPLER GAIN control

M SAMPLER COLOR control

N SAMPLER CUE button

O SAMPLER VOLUME fader

English

Effect section

This section is used to control the two effect units (FX1 and FX2). Controls and buttons used to operate the FX1 unit are located on the left side of the

controller, those used to operate the FX2 unit are located on the right side of the controller. The channels to which the effect is to be applied are set

using the effect assign buttons on the mixer section.

86541

1 FX MODE button

2 Effect parameter controls

3 Effect parameter buttons

4 RELEASE FX indicator

5 RELEASE FX lever

6 TIME control

7 BEATc button, BEATd button

8 TAP button

Rear panel

4 42

b e5 9

6 7

a1 388 c

1 MASTER 1 terminals

2 MASTER 2 terminals

3 BOOTH terminals

4 SIGNAL GND terminal

5 USB-B terminal

6 PHONO terminals

7 LINE terminals

8 CD terminals

9 USB-A terminal

a MIC2 terminal

b MIC1 terminal

c Kensington security slot

d AC IN terminal

e u switch

Front panel

1 PHONES jacks

Operation

! Connect the power cord after all the connections between devices have been completed.

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

Refer to the operating instructions for the component to be connected.

! Be sure to use the included power cord.

! Be sure to use the USB cable included with this product or the one that conforms to USB 2.0.

Example of connections

Connecting input terminals

Rear panel

AUDIO OUT

CON

To power outlet

Power cord

㸦

included

㸧

DJ playerDJ playerDJ player

DJ player

Computer

Analog player

Microphone

Analog player

Portable audio

device

Portable audio

device

Connecting output terminals

Rear panel

Component, amplifier,

powered speaker, etc.

Power amplifier (for booth monitor),

powered speakers, etc.

Power amplifier,

powered speakers, etc.

Front panel

Headphones

English

Connections

For information on using this product with rekordbox dj, refer to this

product’s operating instructions published on the Pioneer DJ site.

1 Connect headphones to one of the [PHONES]

terminals.

2 Connect powered speakers, a power amplifier,

components, etc., to the [MASTER 1] or [MASTER 2]

terminals.

Powered speakers, etc.

! To output the sound from the [BOOTH] terminals, connect speak-

ers or other devices to the [BOOTH] terminals.

3 Connect this unit to your computer via a USB cable.

USB cable

㸦

included

㸧

4 Turn on the computer’s power.

5 Connect the power cord.

To power outlet

Power cord

㸦

included

㸧

6 Press the [u] switch on this unit’s rear panel to turn

this unit’s power on.

Turn on the power of this unit.

! For Windows users

The message [Installing device driver software] may appear

when this unit is first connected to the computer or when it is

connected to a different USB port on the computer. Wait a while

until the message [Your devices are ready for use] appears.

7 Turn on the power of the devices connected to the

output terminals (powered speakers, power amplifier,

components, etc.).

! When a microphone, DJ player or other external device is con-

nected to input terminals, the power of that device also turns on.

Starting the system

Launching rekordbox

Account registration for KUVO and activation work for rekordbox dj, rekordbox dvs, and rekordbox video are required at first startup. For details on each

work procedure, access the rekordbox product site below and see the rekordbox Operating Instructions in [Support].

https://rekordbox.com/en/support/manual.php

For Windows 7

Click the [All Programs] > [Pioneer] > [rekordbox X.X.X] > [rekordbox] icon from the Windows [Start] menu.

For Windows 10/8.1

From [Apps view], click the [rekordbox] icon.

For Mac OS X

Open the [Applications] folder in Finder, then double-click the [rekordbox] icon.

Adding music files to [Collection]

“Collection” is music files that are managed by rekordbox.

The music files on the computer can be used with rekordbox if they are analyzed and then registered as rekordbox music collection files.

Tree View

Track list

1 Click [Collection] in the tree view.

The [Collection] music files are displayed in the track list.

2 Open Finder or Windows explorer, then drag and drop music files or folders including music files to the track list.

The music files are added to the [Collection] and the tag information of the music files is read and then displayed.

This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating rekordbox dj, see the rekord-

box software’s manual.

Loading tracks and playing them

The following describes the procedure for loading tracks onto deck 1 as an example.

BPM DOWN

BPM UP

1 Rotary selector

2 BACK button

3 LOAD button

1 Select the [Collection] or a playlist or other item and

then press the unit’s rotary selector to move to the track

list.

2 Turn the rotary selector and select the track.

3 Press the [LOAD] button to load the selected track

onto the deck.

English

Playing tracks and outputting the sound

The following describes the procedure for outputting the channel 1

sound as an example.

! Set the volume of the devices (power amplifier, powered speakers,

etc.) connected to the [MASTER 1] and [MASTER 2] terminals to an

appropriate level. Note that loud sound will be output if the volume is

set too high.

BPM DOWN

BPM UP

4 CD, USB selector switch

5 TRIM control

6 ISO/EQ (HI, MID, LOW) controls

7 Headphones CUE button

8 Channel fader

9 HEADPHONES MIXING control

a HEADPHONES LEVEL control

b Crossfader assign selector switch

c Crossfader

d MASTER LEVEL control

e MASTER CUE button

f BOOTH MONITOR control

1 Set the positions of the controls, etc., as shown

below.

Names of controls, etc. Position

MASTER LEVEL control Turned fully counterclockwise

CD, USB selector switch [USB] position

TRIM control Turned fully counterclockwise

ISO/EQ (HI, MID, LOW) controls Center

Channel fader Moved forward

Crossfader assign selector switch [THRU] position

2 Press the [PLAY/PAUSE f] button to play the track.

BPM DOWN

BPM UP

3 Turn the [TRIM] control.

Adjust the [TRIM] control so that the channel level indicator’s orange

indicator lights at peak level.

4 Move the channel fader away from you.

5 Turn the [MASTER LEVEL] control to adjust the audio

level of the speakers.

Adjust the sound level output from the [MASTER 1] and [MASTER 2]

terminals to an appropriate level.

Monitoring sound with headphones

Set the positions of the controls, etc., as shown below.

Names of controls, etc. Position

HEADPHONES MIXING control Center

HEADPHONES LEVEL control Turned fully counterclockwise

1 Press the headphones [CUE] button for the channel 1.

2 Turn the [HEADPHONES LEVEL] control.

Adjust the sound level output from the headphones to an appropriate

level.

Note

This unit and rekordbox dj include many functions to allow for more

individualistic DJ performances. For details on each function, see the

rekordbox software’s manual.

! The rekordbox software’s manual can be downloaded from rekord-

box.com. For details, see Viewing the Operating Instructions of rekord-

box (p. 4 ).

Quitting the system

1 Quit rekordbox.

2 Press the [u] switch on this unit’s rear panel to set

this unit’s power to standby.

3 Disconnect the USB cable from your computer.

Additional information

Changing the settings

! For detailed instructions on changing this unit’s settings, see

Changing the settings in the Operating Instructions.

Troubleshooting

! If you think that there is something wrong with this unit, check

the items in the “Troubleshooting” section of this unit’s operating

instructions and access the Pioneer DJ site and check [FAQ] for the

[DDJ-RZX].

http://www.pioneerdj.com/

Sometimes the problem may lie in another component. Inspect the

other components and electrical appliances being used. If the prob-

lem cannot be rectified, ask your nearest Pioneer authorized service

center or your dealer to carry out repair work.

! This unit may not operate properly due to static electricity or other

external influences. In this case, proper operation may be restored by

turning the power off, waiting 1 minute, then turning the power back

on.

Cleaning the touch display

Do not use organic solvents, acids or alkalis for cleaning the surface

of the touch display. Wipe with a dry soft cloth or a cloth immersed in

neutral detergent and squeezed properly.

About trademarks and registered

trademarks

! Pioneer DJ is a trademark of the PIONEER CORPORATION and is

used under license. rekordbox and KUVO are trademarks or regis-

tered trademarks of the Pioneer DJ Corporation.

! Windows is a registered trademark of Microsoft Corporation in the

United States and other countries.

! Mac, Mac OS, and Finder are trademarks of Apple Inc., registered in

the U.S. and other countries.

! Intel and Intel Core are trademarks of Intel Corporation in the U.S.

and/or other countries.

The names of companies and products mentioned herein are trade-

marks or registered trademarks of their respective owners.

Cautions on copyrights

rekordbox restricts playback and duplication of copyright-protected

music contents.

! When coded data, etc., for protecting the copyright is embedded in

the music contents, it may not be possible to operate the program

normally.

! When rekordbox detects that coded data, etc., for protecting the

reading, etc.) may stop.

Recordings you have made are for your personal enjoyment and accord-

ing to copyright laws may not be used without the consent of the copy-

right holder.

! Music recorded from CDs, etc., is protected by the copyright laws of

individual countries and by international treaties. It is the full respon-

sibility of the person who has recorded the music to ensure that it is

used legally.

! When handling music downloaded from the Internet, etc., it is the

full responsibility of the person who has downloaded the music to

ensure that it is used in accordance with the contract concluded

with the download site.

English

Specifications

Power requirements ....................................AC 110 V to 240 V, 50 Hz/60 Hz

Power consumption ............................................................................... 48 W

Power consumption (standby) ............................................................. 0.4 W

Main unit weight .................................................................................15.9 kg

Max. external dimensions .....945 mm (W) × 119.7 mm (H) × 547 mm (D)

Tolerable operating temperature ........................................+5 °C to +35 °C

Tolerable operating humidity ...................... 5 % to 85 % (no condensation)

Audio Section

Sampling rate ........................................................... 44.1 kHz/48 kHz/96 kHz

MASTER D/A converter .......................................................................32 bits

Other A/D and D/A converters ............................................................24 bits

Frequency characteristic

USB, CD/LINE, MIC1, MIC2 ........................................... 20 Hz to 20 kHz

S/N ratio (rated output, A-WEIGHTED)

USB ................................................................................................ 116 dB

CD/LINE ......................................................................................... 101 dB

PHONO............................................................................................ 91 dB

MIC1 ................................................................................................ 81 dB

MIC2 ................................................................................................ 81 dB

Total harmonic distortion (20 Hz — 20 kHzBW)

USB ...............................................................................................0.002 %

CD/LINE ........................................................................................0.003 %

Standard input level / Input impedance

CD/LINE ............................................................................–12 dBu/47 kW

PHONO.............................................................................–52 dBu/47 kW

MIC1 ................................................................................... –57 dBu/3 kW

MIC2 ................................................................................... –57 dBu/3 kW

Standard output level / Load impedance / Output impedance

MASTER 1 .................................................. +6 dBu/10 kW/390 W or less

MASTER 2 .................................................. +2 dBu/10 kW/820 W or less

BOOTH ....................................................... +6 dBu/10 kW/390 W or less

PHONES .........................................................+8 dBu/32 W/25 W or less

Rated output level / Load impedance

MASTER 1 ..........................................................................25 dBu/10 kW

MASTER 2 ..........................................................................21 dBu/10 kW

BOOTH ............................................................................... 25 dBu/10 kW

Crosstalk

CD/LINE ........................................................................................... 82 dB

Channel equalizer characteristic

HI .....................................................................–26 dB to +6 dB (30 kHz)

MID .................................................................... –26 dB to +6 dB (1 kHz)

LOW ..................................................................–26 dB to +6 dB (20 Hz)

Microphone equalizer characteristic

HI ...................................................................–12 dB to +12 dB (10 kHz)

MID ............................................................... –12 dB to +12 dB (2.5 kHz)

LOW ..............................................................–12 dB to +12 dB (100 Hz)

Input / Output terminals

CD/LINE Input terminals

RCA pin jacks ..................................................................................4 sets

PHONO input terminals

RCA pin jacks ..................................................................................2 sets

MIC terminal

XLR connector & 1/4” TRS jack ......................................................2 sets

MASTER 1 output terminal

XLR connector...................................................................................1 set

MASTER 2 output terminal

RCA pin jacks ....................................................................................1 set

BOOTH output terminal

1/4” TRS jack .....................................................................................1 set

PHONES output terminal

1/4” stereo jack .................................................................................1 set

3.5 mm stereo mini jack ...................................................................1 set

USB terminals

B type ...............................................................................................2 sets

— Be sure to use the [MASTER 1] terminals only for a balanced

output. Connection with an unbalanced input (such as RCA)

using an XLR to RCA converter cable (or converter adapter), etc.,

may lower the sound quality and/or result in noise.

For connection with an unbalanced input (such as RCA), use the

[MASTER 2] terminals.

— The specifications and design of this product are subject to

change without notice.

ATTENTION

POUR ÉVITER TOUT RISQUE D’ÉLECTROCUTION, NE

S ENLEVER LE COUVERCLE (NI LE PANNEAU

ARRIÈRE). A

UCUNE PIÈCE RÉPARABLE PAR

’UTILISATEUR NE SE TROUVE À L’INTÉRIEUR.

CONFIER TOUT ENTRETIEN À UN PERSONNEL

ALIFIÉ UNIQUEMENT.

D3-4-2-1-1_B1_Fr

AVER

TISSEMENT

Cet appareil

n’est pas étanche. Pour éviter les risques

d’incendie et de décharge électrique, ne placez près de

lui un récipient rempli d’eau, tel qu’un vase ou un pot

de fleurs, et ne l’exposez pas à des gouttes d’eau, des

éclaboussures, de la pluie ou de l’humidité.

D3-4-2-1-3_A1_Fr

AVER

TISSEMENT

Cet appareil est muni d’une fiche de mise à la terre

(masse) à trois fils. Comme la fiche présente une

troisième broche (de terre), elle ne peut se brancher

que sur une prise de courant, prévue pour une mise à

la terre. Si vous n

’arrivez pas à insérer la fiche dans la

prise de courant, contactez un électricien qualifié pour

faire remplacer la prise par une qui soit mise à la terre.

N’annulez pas la fonction de sécurité que procure cette

fiche de mise à la terre

D3-4-2-1-6_A1_Fr

AVER

TISSEMENT

our éviter les risques d’incendie, ne placez aucune

flamme nue (telle qu’une bougie allumée) sur

l’appareil.

D3-4-2-1-7a_A1_Fr

Milieu de fonctionnement

mpérature et humidité du milieu de fonctionnement :

De +5 °C à +35 °C (de +41 °F à +95 °F) ; Humidité

relative inférieure à 85 % (orifices de ventilation non

obstrués

)

N’installez pas l’appareil dans un endroit mal ventilé ou

un lieu soumis à une forte humidité ou en plein soleil

(ou à une forte lumière artificielle).

D3-4-2-1-7c*_A1_Fr

PRÉCAUTION DE VENTILATION

Lors de l’installation de l’appareil, veillez à laisser un

espace suffisant autour de ses parois de manière à

améliorer la dissipation de chaleur (au moins 5 cm sur

le dessus, 5 cm à l’arrière et 5 cm de chaque côté).

D3-4-2-1-7d*_A1_Fr

ATTENTION

L’interrupteur de cet appareil ne coupe pas

complètement celui-ci de sa prise secteur. Comme le

cordon d’alimentation fait office de dispositif de

déconnexion du secteur, il devra être débranché au

niveau de la prise secteur pour que l’appareil soit

complètement hors tension. Par conséquent, veillez à

installer l’appareil de telle manière que son cordon

d’alimentation puisse être facilement débranché de

la prise secteur en cas d’accident. Pour éviter tout

risque d’incendie, le cordon d’alimentation sera

débranché au niveau de la prise secteur si vous

prévoyez une période prolongée de non utilisation

(par exemple avant un départ en vacances).

D3-4-2-2-2a*_A1_Fr

AVERTISSEMENT

Gardez les pièces de petite taille hors de la portée des

bébés et des enfants. En cas d’ingestion accidentelle,

veuillez contacter immédiatement un médecin.

D41-6-4_A1_Fr

Si vous souhaitez vous débarrasser de cet appareil, ne le mettez pas à la poubelle avec vos ordures ménagères. Il existe un système de

collecte séparé pour les appareils électroniques usagés, qui doivent être récupérés, traités et recyclés conformément à la législation.

Les habitants des états membres de l’UE, de Suisse et de Nor

vège peuvent retourner gratuitement leurs appareils électroniques usagés aux

centres de collecte agréés ou à un détaillant (si vous rachetez un appareil similaire neuf).

Dans les pays qui ne sont pas mentionnés ci-dessus, veuillez contacter les autorités locales pour savoir comment vous pouvez vo

us débarrasser

de vos appareils.

ous garantirez ainsi que les appareils dont vous vous débarrassez sont correctement récupérés, traités et recyclés et préviendrez de cette façon

les impacts néfastes possibles sur l’environnement et la santé humaine.

K058b_A1_Fr

NOTE IMPORTANTE SUR LE CABLE

D’ALIMENTATION

Tenir le câble d’alimentation par la fiche. Ne pas

débrancher la prise en tirant sur le câble et ne pas

toucher le câble avec les mains mouillées. Cela risque

de provoquer un court-circuit ou un choc électrique. Ne

pas poser l’appareil ou un meuble sur le câble. Ne pas

pincer le câble. Ne pas faire de noeud avec le câble ou

l’attacher à d’autres câbles. Les câbles d’alimentation

doivent être posés de façon à ne pas être écrasés. Un

câble abîmé peut provoquer un risque d’incendie ou un

choc électrique. Vérifier le câble d’alimentation de

temps en temps. Contacter le service après-vente le

plus proche ou le revendeur pour un remplacement.

S002*_A1_Fr

Français

Informations préliminaires

Comment lire ce manuel

! Merci d’avoir acheté ce produit Pioneer DJ.

Ce guide décrit brièvement les procédures d’installation jusqu’au

branchement de l’appareil à votre ordinateur et à la sortie audio.

Pour consulter les procédures détaillées, reportez-vous au

mode d’emploi.

Prière de lire cette brochure et le mode d’emploi ! Les deux docu-

ments contiennent des informations importantes qui doivent être

comprises avant d’utiliser ce produit.

Cela fait, conservez le mode d’emploi de façon à pouvoir vous y

référer en cas de nécessité.

! Dans ce manuel, les noms de menus s’affichant sur l’écran du pro-

duit et sur celui de l’ordinateur, ainsi que les noms de touches et de

prises, etc. sont indiqués entre crochets. (Par ex. : [Fichier], touche

[CUE] et prises de sortie [PHONES])

! Veuillez noter que les écrans et les caractéristiques techniques

du logiciel décrit dans ce manuel, ainsi que l’aspect externe et les

caractéristiques techniques du matériel sont en cours de déve-

loppement de sorte que les caractéristiques finales peuvent être

différentes.

! Veuillez noter que selon la version du système d’exploitation, les

réglages du navigateur web, etc., le fonctionnement peut être diffé-

rent des marches à suivre indiquées dans ce mode d’emploi.

Caractéristiques

Cet appareil est un contrôleur DJ tout-en-un conçu spécialement pour

rekordbox dj. Ses interfaces composées de diverses commandes,

comme “DISPLAY”, “BIG JOG”, “PERFORMANCE PAD” et la table de

mixage à 4 canaux, sont suffisamment espacées pour permettre des

performances DJ plus individualisées à l’aide de rekordbox dj.

Cet appareil dispose également des fonctions “SOUND COLOR FX” et

“OSC SAMPLER” permettant d’ajouter des arrangements originaux à la

musique en cours de lecture.

En outre, les nombreuses prises d’entrée et de sortie prennent en

charge divers styles DJ. Avec son panneau supérieur en aluminium, le

design de cet appareil lui donne un aspect haut de gamme adapté à

diverses scènes, telles que les boîtes de nuit, soirées à domicile, etc.

Contenu du carton d’emballage

! Cordon d’alimentation

! Câble USB

! Garantie (pour certaines régions seulement)

! Mode d’emploi (Guide de démarrage rapide) (ce document)

! Avis relatif à la licence du logiciel

! Carte de clé de licence rekordbox dj

! Carte de clé de licence rekordbox dvs

! Carte de clé de licence rekordbox video

1 Un seul câble USB est fourni avec cet appareil.

Pour connecter deux appareils, utilisez un câble conforme aux

normes USB 2.0.

2 La garantie incluse est destinée à la région européenne.

Attention

La clé de licence ne peut pas être redélivrée. Veillez à ne pas la perdre.

Affichage des manuels

Affichage du Mode d’emploi de cet

appareil

1 Lancez votre navigateur web sur l’ordinateur et

accédez au site Pioneer DJ suivant.

http://www.pioneerdj.com/

2 Cliquez sur [Aide].

3 Cliquez sur [TROUVER LES TUTORIELS & MANUELS].

4 Cliquez sur [DDJ-RZX] dans la catégorie

[CONTRÔLEUR].

5 Cliquez sur la langue souhaitée dans la liste

Mode d’emploi.

Téléchargez si nécessaire.

Affichage du mode d’emploi de

rekordbox

1 Lancez votre navigateur web sur l’ordinateur et

accédez au site rekordbox.com ci-dessous.

http://rekordbox.com/

2 Cliquez sur [Aide].

3 Cliquez sur [Manuel].

4 Cliquez sur la langue souhaitée du manuel.

À propos de rekordbox

! rekordbox

rekordbox est un logiciel composite permettant la gestion des mor-

ceaux et des performances DJ.

! rekordbox dj

La fonction de performances DJ de rekordbox est appelée

rekordbox dj. Saisissez la clé de licence indiquée sur la carte de

clé de licence rekordbox dj fournie avec ce produit pour utiliser

rekordbox dj.

! rekordbox dvs

La fonction DVS, pouvant être ajoutée à rekordbox dj pour réaliser

des opérations de platine à l’aide des signaux de commande lus sur

un CDJ ou une platine DJ, s’appelle rekordbox dvs. La saisie de la

clé de licence indiquée sur la carte de clé de licence fournie avec ce

produit permet d’ajouter cette fonction à rekordbox dj.

! rekordbox video

Il s’agit d’une fonction vidéo appelée rekordbox video qui peut être

ajoutée à rekordbox dj et qui permet la lecture de fichiers vidéo et

image et la réalisation de performances. La saisie de la clé de licence

indiquée sur la carte de clé de licence fournie avec ce produit per-

met d’ajouter rekordbox dj à cette fonction.

Environnement fonctionnel minimal

Systèmes d’exploitation

pris en charge

Processeur et mémoire requise

Mac OS X : 10.11/10.10/10.9

(dernière mise à jour)

Processeur Intel

Core™ i5 2,5 GHz ou plus

8 Go ou plus de RAM

Windows : Windows 10,

Windows 8.1, Windows

8.1 Professionnel (dernier

service pack), Windows 7

Édition Familiale Premium,

Professionnel, Édition

Intégrale (dernier service

pack)

Processeur Intel

Core™ i5 2,5 GHz ou plus

8 Go ou plus de RAM

Divers

Port USB

Un port USB 2.0 est indispensable pour raccorder cet

ordinateur à cet appareil.

Résolution de l’écran Résolution de 1280 x 768 ou plus

Connexion Internet

Une connexion Internet est nécessaire pour l’enregis-

trement du compte utilisateur de rekordbox et pour le

téléchargement du logiciel.

! rekordbox est compatible avec les systèmes d’exploitation 64 bits (Windows/

Mac) uniquement.

! Pour les toutes dernières informations sur la configuration requise, la compati-

bilité et les systèmes d’exploitation pris en charge de rekordbox, reportez-vous à

[Exigences systéme] sur le site rekordbox.com ci-dessous.

http://rekordbox.com/

! Le fonctionnement sur tous les ordinateurs n’est pas garanti, même lorsque les

conditions de fonctionnement mentionnées ci-dessus sont remplies.

! Selon les réglages d’économie d’énergie de l’ordinateur, etc. la capacité de

traitement du processeur et du disque dur peut être insuffisante. Lorsque vous

utilisez rekordbox, assurez-vous que l’ordinateur est en état de fournir sa perfor-

mance optimale (par exemple en laissant le cordon d’alimentation raccordé),

surtout s’il s’agit d’un ordinateur portable.

! L’emploi d’Internet exige la signature d’un contrat séparé avec un fournisseur de

services Internet et le paiement de droits.

! Utilisez la dernière version/le dernier Service Pack du système d’exploitation.

Installation de l’application

Installation de rekordbox

1 Accédez à rekordbox.com.

https://rekordbox.com/fr/store/

! La page de contenu est soumise à modification sans notification

préalable.

2 Consultez le guide de démarrage, puis cliquez sur

[Téléchargement].

3 Lisez attentivement l’Accord de licence du logiciel et

cochez la case [Agree] si vous acceptez.

Lorsque vous cochez la case, [Téléchargement] peut être sélectionné.

4 Cliquez sur [Téléchargement].

Le téléchargement de rekordbox commence.

5 Double-cliquez sur le fichier téléchargé pour le

décompresser.

6 Double-cliquez sur le fichier décompressé pour lancer

le programme d’installation.

7 Lisez attentivement l’Accord de licence du logiciel, et

passez à l’installation en fonction des instructions qui

apparaissent à l’écran si vous l’acceptez.

! Si vous n’acceptez pas le contenu de l’Accord de licence du

logiciel, annulez l’installation.

8 Lorsque l’écran de fin de l’installation apparaît, suivez

les instructions qui apparaissent à l’écran pour fermer le

programme d’installation.

L’installation est terminée.

! Pour pouvoir utiliser rekordbox dj, rekordbox dvs et rekordbox video,

une activation (authentification de licence) est nécessaire. Pour

plus d’informations, reportez-vous au mode d’emploi de rekordbox.

https://rekordbox.com/fr/support/manual.php

Français

Noms des éléments

Pour plus de détails sur les fonctions des diverses touches et commandes, reportez-vous à Noms et fonctions des éléments dans le mode d’emploi.

BPM DOWN

BPM UP

1 Section d’exploration

2 Section Platines

3 Section Mixeur

4 Section des effets

5 Section d’affichage (deck)

6 Section d’affichage (table de mixage)

Section d’exploration

1 5

1 Sélecteur rotatif

2 Touche BACK

3 Touche TAG TRACK

4 Touche LOAD

5 Touche UTILITY

Section d’affichage (deck)

1 Touche VIEW (PAD INFO / DECK VIDEO)

2 Touche TRACK INFO

3 Touche TIME MODE

4 Touche COMBO FX

5 Touche SAMPLER REPEAT

6 Affichage tactile (deck)

Section d’affichage (table de mixage)

2 4

1 Touche VIEW (WAVEFORM / MASTER VIDEO)

2 Touche 2DECK/4DECK

3 Touche SOUND COLOR FX SINGLE MODE

4 Touche SOUND COLOR FX MULTI MODE

5 Affichage tactile (table de mixage)

Section Platines

Cette section permet de contrôler les quatre platines. Les touches et commandes utilisées pour l’exploitation des platines 1 et 3 se trouvent sur le côté

gauche de la console, celles pour l’exploitation des platines 2 et 4 se trouvent sur le côté droit de la console.

1 Section d’affichage de la molette jog

2 Molette jog

3 Commande JOG FEELING ADJUST

4 Commande VINYL SPEED ADJUST

5 Touche JOG MODE

6 Touche MASTER TEMPO

7 Indicateur TAKEOVER

8 Touche TEMPO RESET et indicateur TEMPO RESET

9 Curseur TEMPO

a Touche AUTO BEAT LOOP

b Touche LOOP 1/2X