Rancilio Classe 10S Use And Maintenance

Marca: Rancilio

Modello: Classe 10S

Categoria: Accessori per la preparazione del caffè

Tipo: Use And Maintenance

Questo manuale è adatto anche per

Uso e manutenzione

Emploi et entretien

Gebrauch und Instandhaltung

Use and maintenance

Uso y manutención

Uso e manutenção

CLASSE 10 USB / S / RE

USB / S / RE

www.rancilio.com

Cod. 46900146 REV. -- 03/2008

ITALY

Rancilio Macchine per caffè S.p.A.

Viale della Repubblica 40

20010 Villastanza di Parabiago

Milano Italy

Tel +39 0331 408200

Fax +39 0331 551437

www.rancilio.it

[email protected]

SPAIN

Rancilio Espana, s.a.

Gran Vía de Carlos III, 84 3ª

Edicio Trade

08028 Barcelona Spain

Tel. +34 902 884 275

Tel. +34 934 923 414

Fax +34 93 496 57 01

www.rancilio.com

[email protected]

USA

Rancilio North America Inc.

8102 S.Lemont Rd. #1200

Woodridge, IL 60517 USA

Tel +1 630 427 1703

Fax +1 630 427 1713

www.rancilio.com

[email protected]

ASIA

Asian Market Access HK Ltd

601 Tak Woo House

17-19 D’aguilar Street Central

Hong Kong

Tel +852 2521 7839

Fax +852 2521 5787

www.rancilio.com

Gentile cliente,

grazie per averci accordato la Sua ducia.

Siamo sicuri che il prodotto che Lei ha acquistato risponderà in pieno alle Sue

aspettative, come tutti gli altri articoli della produzione RANCILIO. Il prodotto che Lei si

accinge ad usare è il risultato di approfonditi studi e meticolose sperimentazioni fatte

dalla RANCILIO per offrirLe quanto di più funzionale, sicuro ed apprezzabile, anche sotto

il prolo del design, si possa trovare sul mercato. Il libretto di istruzioni per il corretto

uso e manutenzione della macchina La aiuterà a sfruttare al meglio le sue elevatissime

possibilità e prestazioni.

Con l’augurio di poterLa sempre annoverare tra i nostri clienti, Le auguriamo una buona

lettura.

Cher Client,

Nous Vous remercions pour Votre conance.

Nous sommes certains que le produit que Vous avez acheté correspondra entièrement

à Vos désirs, comme du reste tous les articles de la production RANCILIO. Le produit

que Vous allez employer est le résultat d’études approfondies et de méticuleux essais

effectués par RANCILIO an de pouvoir Vous offrir le produit le plus fonctionnel, le plus

sûr et le plus remarquable, également du point de vue design, que l’on puisse trouver

sur le marché. Le petit livre d’instructions pour l’emploi correct et l’entretien de la

machine Vous aidera à tirer le maximum de ses grandes possibilités et performances.

Nous sommes certains que nos explications sont claires et espérons, cher client, mériter

Votre délité.

Sehr geehrte Kundin/sehr geehrter Kunde,

Zuerst möchten wir Innen für das uns entgegengebrachte Vertrauen danken.

Wir hoffen, dass das von Ihnen gekaufte Produkt Ihren Erwartungen in jeder Hinsicht

entsprechen wird-wie übrigens auch all unsere anderen Erzeugnisse. Das Produkt

das Sie in Gebrauch nehmen werden, ist das Resultat von sorgfältigen von RANCILIO

Untersuchungen und Tests, um Ihnen in Bezug auf Funktionalität, Sicherheit,

Leitungsfähigkeit sowie Design ein Produkt anbieten zu können, das das Beste auf

Markt bendliche ist. Das Büchlein mit den Anwiesungen für eine korrekte Bedienung

und Wartung der Maschine wird Ihnen behilich sein, das Beste aus Ihnem Gerät zu

machen. Wir hoffen, dass unsere Erklärungen verständlich sind und dass Sie auch in

Zukunft zu unseren Kunden zählen dürfen.

Mit freundlichen Grüssen.

Dear Customer,

First of all, thank you for choosing RANCILIO.

We are condent that the product you have purchased will meet all your expectations

just as all our other products are designed to do. The product that you are about to use

is the outcome of painstaking research and tests.

Rancilio guarantees the equipment we have supplied to you, is the most functional,

safe and satisfactory of its kind to be found on the market, in regards to both its design

and its efciency.

This booklet of instructions, which outlines the correct use and maintenance will

help you to get the best possible service out of your machine. We trust you will nd

our explanations clear and we may continue, in the future, to count you among our

esteemed customers.

Muy estimado cliente:

muchas gracias por habernos acordado Su conanza.

Estamos seguros que el producto que Ud. ha adquirido responderà seguramente a Sus

esperanzas, asi como és por todos los demás articulos RANCILIO fabrica. El producto que

Ud. se apresta a utilzar és el resultado de particulares estudios y pruebas meticulosas

hechas por la rma RANCILIO para ofrecerle un producto funcional, seguro y apreciable,

tambien por lo que se reere al design, seguramente

uno de los mejores que Ud. pueda encontrar en comercio. El manual de instrucciones para

utilizar correctamente y efectuar la manutención de la máquina, la ayudará a disfrutar

a lo máximo las elevadas posibilidades y prestaciones de la misma. Mientras conamos

que Ud. siga siendo siempre Cliente nuetro, le deseamo una provechosa lectura.

Prezado Cliente,

Obrigado por nos ter dado a sua conança.

Temos certeza que o produto que Você comprou responderá totalmente as suas

expectativas, como todos os outros artigos da produção RANCILIO. O produto que Você

está para usar é o resultado de estudos profundos e experiências meticulosas feitas pela

RANCILIO, para oferece-lhe quanto de mais funcional, seguro e considerável, também

sob o perl do disign, que se possa encontrar no mercado. O manual de instruções para

o uso correto e manutenção da máquina lhe ajudará a desfrutar ao máximo as suas

elevadíssimas possibilidades e desempenhos.

Com o desejo de poder tê-lo sempre entre os nossos clientes, desejamo-lhe uma boa

leitura.

Tratamento do lixo dos aparelhos elétricos e eletrônicos

Jogar o produtos seguindo as normas em vigor relativas à coleta diferencia-

da em centros de coleta apropriados.

Não tratar como simples lixo urbano.

Para qualquer informação necesssária contatar o construtor no endereço indicado

no manual de instruções.

O produto responde aos requisitos exigidos pelas novas diretrizes introdu-

zidas para tutelar o ambiente e deve ser sucadato em modo apropriado ao

nal do seu ciclo de vida.

Afvalbehandeling van de elektrische en elektronische apparatuur

Verwerk het product volgens de geldende normen m.b.t. de gescheiden

afval bij de voorbestemde vuilniscentrums.

Behandel het product niet als eenvoudig stadsvuil.

Neem contact op met de constructeur op het aangegeven adres in deze handleiding

voor nadere informaties.

Het product beantwoordt aan de door de nieuwe richtlijnen verlangde verei-

sten ingevoerd ter bescherming van het milieu en moet op passende wijze op

het einde van zijn levenscyclus worden verwerkt.

    



Produkt musi zostać poddany utylizacji zgodnie z obowiązującymi przepi-

sami dotyczącymi segregowania odpadów w specjalnie do tego wyznaczonych miej-

scach. Nie wyrzucać razem ze zwykłymi odpadami miejskimi.

W celu uzyskania jakichkolwiek informacji proszę skontaktować się z producentem

pod adresem podanym w instrukcji obsługi dla użytkownika.

Ten produkt odpowiada wymogom zawartym w nowych dyrektywach

wprowadzonych w celu ochrony środowiska i po zakończeniu cyklu eksploa-

tacji musi zostać zutylizowany we właściwy sposób.



Odlaganje izdelkov je potrebno vršiti v skladu z veljavnimi predpisi v zvezi z

selektivnim odlaganjem odpadkov v centrih za zbiranje odpadkov ki so temu

namenjeni. Ne odlagajte ga kot običajne smeti.

Za kakršnokoli informacijo kontaktirajte proizvajalca na naslovu, ki je naveden v

priročniku z navodili.

Izdelek odgovarja zahtevam novih smernic, ki so uvedene zaradi zaščite

življenske sredine in mora biti odložen na ustrezen način po koncu življenjske

dobe.



Iekārtu atkritumus nepieciešams utilizēt atbilstoši spēkā esošajiem noteikumiem,

kuri reglamentē dažādu veidu atkritumu utilizēšanu tikai speciālajās atkritumu

konteineros. Nemetiet šos atkritumus parastajos kopējos pilsētas atkritumu.

Lai saņemtu jebkuru informāciju, griezieties pie ražotāja, kura adrese uzrādīta

ekspluatācijas instrukcijā.

Dotais produkts atbilst jaunās direktīvas prasībām, kura attiecās uz

ekoloğisko drošību, un tas ir atbilstošā kārtībā utilizējams pēc tā, kad nobei-

gsies tā derīguma termiņš.



Výrobek likvidujte podle současných předpisů o likvidaci tříděného odpadu

na k tomu určených skládkách.

Nezacházejte s ním jako s běžným obecním odpadem.

Potřebujete-li jakékoli informace, kontaktujte prosím výrobce na adrese uvedené v

návodu pro použití.

Výrobek odpovídá požadavkům nových směrnic zavedených pro ochranu

životního prostředí a zlikvidovat se na konci své životnosti musí příslušným

způsobem.



Výrobok likvidujte podľa súčasných predpisov o likvidácii triedeného odpa-

du na k tomu určených skládkach.

Nezaobchádzajte s ním ako s bežným komunálnym odpadom.

Ak potrebujete akékoľvek informácie, kontaktujte, prosím, výrobcu na adrese uve-

denej v návode na použitie.

Výrobok zodpovedá požiadavkám nových smerníc zavedených pre ochra-

nu životného prostredia a zlikvidovať sa na konci svojej životnosti musí

príslušným spôsobom.



Šalinkite įrangos atliekas atitinkamai esamų taisyklių, kurios liečia tokios

rūšies atliekas apie specialias atliekų kaupimo vietas.

Nemeskite atliekas į paprastus miesto šiukšlių konteinerius. Papildomos informa-

cijos kreipkitės į gamintoją nurodytu vartotojo instrukcijoje adresu .

Šis produktas atitinka įvestos ekologiniam saugumui naujos direktyvos

reikalavimams ir turi būti sunaikintas pasibaigus jo atitikties terminui.

Entsorgung von elektrischen und elektronischen Geräten

Das ist Produkt gemäß den geltenden Normen für die Mülltrennung bei den

zuständigen Sammelzentren zu entsorgen.

Nicht wie normalen Müll behandeln.

Weitere Informationen sind beim Hersteller unter der in der Gebrauchsanleitung an-

gegebenen Adresse zu erhalten.

Das Produkt entspricht den Erfordernissen den neuen Richtlinien über den

Umweltschutz, und muss an seinem Lebensende entsprechend entsorgt wer-

den.



Dispose of the product in accordance with current regulations concerning diffe-

rentiated waste disposal in dedicated waste disposal areas.

Do not treat as simple urban waste.

For any information please contact the manufacturer at the address specied in the user

manual.

The product complies with the requirements of the new directives introduced for

the environmental safeguard and must be disposed of appropriately at the end

of its life cycle.



Smaltire il prodotto seguendo le norme vigenti relative allo smaltimento

differenziato presso centri di raccolta dedicati.

Non trattare come semplice riuto urbano.

Per qualsiasi informazione necessaria contattare il costruttore all’indirizzo indicato

nel libretto istruzioni.

Il prodotto risponde ai requisiti richiesti dalle nuove direttive introdotte a tutela

dell’ambiente e che deve essere smaltito in modo appropriato al termine del

suo ciclo di vita.



Ecouler le produit conformément aux normes en vigueur concernant l’écou-

lement différencié auprès de centres de récolte dédiés.

Ne pas traiter comme simples ordures urbaines. Pour toute information nécessaire

contacter le constructeur à l’adresse indiquée dans le manuel d’emploi.

Le produit est conforme aux caractéristiques requises par les nouvelles direc-

tives introduites pour la sauvegarde de l’environnement et doit être écoulé de

façon appropriée à la n de son cycle de vie.



Eliminar el producto en los centros de recolección especializados, siguiendo

las normas vigentes relativas a la eliminación diferenciada.

No tratar como simple desecho urbano.

Para cualquier información necesaria, contacten al fabricante en la dirección indica-

da en el manual de instrucciones.

El producto responde a los requisitos demandados en las nuevas directivas

introducidas para la protección del ambiente y debe ser eliminado de manera

apropiada al nal de su ciclo de vida.



Bortskaf produktet i overensstemmelse med nuværende reguleringer vedr.

forskellige affaldsprodukter på deponeringssteder dedikeret til affald.

Må ikke behandles som alm. byaffald.

Kontakt producenten på den specicerede adresse i brugerhåndbogen for yderligere

oplysninger.

Produktet er i overensstemmelse med de nye direktiver, introduceret for mi-

ljøforanstaltningen og skal bortskaffes på behørig vis ved slutningen af dets

livscyklus.

Avfallshantering av elektriska och elektroniska apparate

Nedskrota produkten genom att följa gällande normer för differentierad sa-

nering på seriösa uppsamlingsställen.

Behandla det inte som vanligt tätortsavfall.

Vid behov av ytterligare information, var vänlig ta kontakt med tillverkaren på den

adress som anges i bruksanvisningen.

Produkten motsvarar de krav som ställs i de nya miljödirektiven och den

måste nedskrotas på ett lämpligt sätt i slutet av sin livscykel.



Produktet skal avhendes i samsvar med gjeldende forskrifter angående dif-

ferensiert avfallsavhending på dediserte avfallsavhendingsområder.

Det må ikke behandles som vanlig byavfall.

For videre opplysninger vennligst kontakt fabrikanten på adressen som er angitt i

bruksanvisningen.

Produktet etterkommer kravene i de nye miljødirektivene og skal avhendes

på en passende måte etter avsluttet bruk.

Elektri- ja elektronseadmete jäätmete töötlemine

Tootest lahtisaamist peab läbi viima vastavalt käibivatele eeskirjadele, mis

käsitlevad jäätmetest eristatud lahtisaamist selleks mõeldud jäätmetest

lahtisaamise alades.

Mitte töödelda nagu tavalisi majapidamisjäätmeid.

Mistahes informatsiooni saamiseks pöörduge palun tootja poole aadressil, mis on

märgitud kasutaja käsiraamatus.

Toode vastab uuetele nõutele, mis on esitletud keskkonna kaitsmiseks ja sel-

lest peab reeglipäraselt lahti saama selle elutsükli lõpus.



Hävitä tuote noudattaen seuraavia voimassa olevia lajitellun jätteiden käsit-

telyä koskevia määräyksiä asianmukaiseen jätteidenkäsittelylaitokseen.

Älä käsittele sitä tavallisena kaupunkijätteenä.

Mitä tahansa tietoja varten ota yhteyttä valmistajaan ohjekirjassa olevaan osoittee-

seen.

Tuote on uusien ympäristöä suojaavien direktiivien vaatimusten mukainen ja

se tulee hävittää asianmukaisella tavalla sen käyttöiän päätyttyä.



A terméket az erre a célra kijelölt gyűjtőhelyekre adja le követve a szelektív

hulladékgyűjtéssel kapcsolatos jelenlegi jogszabályokat.

Ne kezelje közönséges városi hulladékként.

Bárminemű információért forduljon a gyártóhoz, melynek címét a használati útmu-

tatóban találja.

A termék megfelel a környezet védelme érdekében újonnan bevezetett

irányelvek követelményeinek és ennek megfelelően kell kezelni az élettar-

tamának végeztével.

Il presidente - The president

20010 Villastanza di Parabiago (MI)

Viale della Repubblica 40

DICHIARAZIONE DI CONFORMITA’ CE - DECLARATION DE CONFORMITE CE

EG-KONFORMITÄTSERKLÄRUNG - EC DECLARATION OF CONFORMITY

DECLARACIÓN DE CONFORMIDAD CE - DECLARAÇÃO DE CONFORMIDADE CE

Noi RANCILIO Macchine per caffè S.p.A.

Dichiariamo sotto la nostra responsabilità che il prodotto: Macchina per caffè per uso professionale

Déclarons, sous notre responsabilité, que le produit : Machine à café d’utilisation professionnel

Wir erklären auf unsere Verantwortung, daß das Produkt: 

Declare under our responsibility that the product: Espresso coffee makers for commercial use

Declaramos bajo nuestra responsabilidad que el producto: 

Declaramos sob a nossa responsabilidade que o produto: 

La presente dichiarazione perde la sua validità se la macchina viene modicata senza la nostra espressa autorizzazione.

La présente déclaration perd sa validité dès lors que la machine est modiée sans notre expresse autorisation.

Die vorliegende Erklärung verliert ihre Gültigkeit, wenn die Maschine ohne unsere ausdrückliche Genehmigung verändert wird.

The present declaration will become invalid should the machine be modied without our specic authorization.

La presente declaración pierde su validez si la máquina es modicada sin nuestra expresa autorización.

A presente declaração perde a validade se a máquina é modicada sem a nossa expressa autorização.

al quale è riferita questa Dichiarazione, secondo quanto prescritto dalle direttive speciche:

à laquelle se réfère cette déclaration, selon les prescriptions des directives spéciques.

auf das sich diese Erklärung bezieht, Entsprechend der Vorschriften der spezischen Richtlinien.

to which this declaration relates is, according to the provisions of the specic directives:

al cual se reere esta Declaración, de acuerdo con lo prescrito por las especícas directivas:

ao qual se refere esta Declaração, segundo quanto prescrito pelas especícas diretrizes:

98/37/CE

Direttiva macchina - Direttiva machine - Richtlinie Maschine - Makers directive - Directiva máquina - Diretriz da máquina:

73/23/CEE, 93/68/CEE

Direttiva Bassa Tensione - Direttiva Basse Tension - Niederspannungsrichtline - Low Voltage Directive - Directiva Baja Tensiòn - Diretriz Baixa Tensão:

89/336/CEE, 93/68/CEE, 92/31/CEE

Direttiva EMC - Direttiva EMC - Richtlinie EMC - EMC Directive - Directiva EMC - Diretriz EMC

97/23/CE

Direttiva attrezzatura a pressione (PED)-Directive sur les appareillages sous pression (PED)-Richtlinie für unter Druck stehende Geräte (PED) Pressure

device directive (PED) - Directiva equipos de presión (PED) - Diretriz aparelhagem de pressão (PED)

è conforme alle seguenti norme: - conforme aux normes suivantes :

In Übereinstimmung mit den folgenden Normen: - it complies with the following norms:

es conforme a las siguientes normas: - É conforme as seguintes normas:

EN 60335-1, EN 60335-2-75, EN 55014-1, EN 55014-2, EN 61000-3, EN 61000-4, EN 50366

Norme EN armonizzate - Normes EN harmonisées - Harmonisierte EN-Norme - Harmonized EN norms - Normas EN armonizadas - Normes EN Harmonia

MD-CER.01 rev.0.0 del 16/05/05





Descrizione attrezzatura a pressione-Description de l’appareillage sous pression-Beschreibung der unter Druck stehenden Geräte-

Pressure device description-Descripción de los equipos de presión - Descrição dos equipamentos de pressão

Pressione - Pression

Druck - Pressure

Presión - Pressão

Temperatura - Température

Temperatur - Temperature

Temperatura - Temperatura

Fluido - Fluide

Flüssig - Fluid

Fluido - Fluído

Capacità lt-Capacité lt-Fähigkeit lt-

Capacity lt-Potencia lt- Potência it

Caldaia - Chaudière

Kessel - Boiler

Caldera - Caldeira

0,18/1,8 Mpa/bar

131,2 C°

Acqua/Vapore - Eau/Vapeur

Wasser/Dampf - Water/Steam

Agua/Vapor - Água/Vapor

2 gr. 3 gr. 4 gr.

11 16 22

Pressione - Pression

Druck - Pressure

Presión - Pressão

Temperatura - Température

Temperatur - Temperature

Temperatura - Temperatura

Fluido - Fluide

Flüssig - Fluid

Fluido - Fluído

Capacità-Capacité

Fähigkeit -Capacity

Potencia-Potência

Numero scambiatore -Numéro de l’échangeur

Nummer des Austauschers-

Exehanger number-Número intercambiador

Número Intercambiador

Scambiatore -Echangeur

Austauscher -Exchanger

Intercambiador

1.2/12 Mpa/bar 131,2 C°

Acqua - Eau

Wasser- Water

Agua - Água

0.35 l

2 gr. 3 gr. 4 gr.

2 3 4



3 18

MOD. S

3 6 15

MOD.

USB

MOD. RE









ovat

2 (3/8"G)

1 (Ø 30 mm)



7.1

7.2

7.3

7.4

7.5

6.1

6.2

6.3

6.1

6.2

6.3

7.6

7.7

VERS.

ISTEAM

3 (S)

(RE)

5 (USB)

(RE)

7 (USB)













EN ENGLISH

CONTENTS

Machine identication data ............................. 70

  70

  71

2.1. Specications and composition ................ 71

2.2. Machine equipment .................................. 71

2.3. Mechanical protective devices ................. 72

2.4. Electric safety devices ............................. 72

2.5. Aerial noise ..............................................72

2.6. Vibrations ................................................. 72

  72

3.1. Dimensions and weights .......................... 72

  72

4.1. Precautionary measures .......................... 73

 73

5.1. Packaging ................................................ 73

5.2. Inspection on receipt ................................ 73

  73

6.1.Connections to be made by the user ........ 73

6.1.1. Water and gas supply ........................... 73

6.1.2. Electric supply ....................................... 74

6.2. Preliminary operations ............................. 74

6.3. Connections ............................................. 74

  75

7.1. Controls .................................................... 75

7.2. Control instruments .................................. 76

7.3. Starting up ................................................ 76

  77

8.1. Preparing coffee ....................................... 77

8.2. Preparing cappuccino .............................. 77

8.3. Warming a beverage ................................ 78

8.4. Preparing tea, camomile, etc................ ... 78

8.5. Machines with iSteam automatic system .. 78

8.5.1. Heating Milk or a Drink (iSteam) ........... 78

8.5.2. Preparing Frothed Milk (iSteam) ........... 78

  

9.1. For models USB ....................................... 78

9.1.1. Adjusting the dose ................................. 78

9.2. Programming (Mod.USB) ......................... 79

9.2.1. Selecting the display language ............. 79

9.2.2. Softener regeneration ........................... 80

9.2.3. Buzzer .................................................. 80

9.2.4. Clock ..................................................... 80

9.2.5. Set Timer ............................................... 81

9.2.6. Selection counts .................................... 81

9.2.7. Procedure for replacing the water inside

the boiler with fresh water. .................... 82

9.3. Displaying ................................................ 82

9.3.1. Warming up phase ................................ 82

9.3.2. Operating mode .................................... 82

9.4. Operating safety devices ......................... 83

9.5. The cup-warmer ....................................... 83

9.6. List of malfunctions .................................. 83

9.7. List of warning ......................................... 83

  

  

10.1. Daily ....................................................... 85

10.2. Weekly ................................................... 85

10.2.1. Washing of the coffee groups ............. 85

10.2.2. Cleaning iSteam ................................86

10.3. Periodical ............................................... 86

10.3.1.Renewal of water in the boiler .............. 86

  

  

13.1.1 Safety thermostat – Manual resetting .. 86

 

version 

The operations marked with this symbol

are to be undertaken exclusively by an

installation technician

The operations marked with this symbol are

to be undertaken by the user.

IT ITALIANO 12-30

FR FRANCAIS 31-49

DE DEUTSCH 50-68

   

ES ESPAÑOL 88-106

PT PORTUGUêS 107-125

SCHEMI ELETTRICI

SCHEMAS ELECTRIQUES

SCHALTPLANE

   

ESQUEMAS ELECTRICOS

ESQUEMAS ELÉTRICOS

SCHEMI IDRAULICI

SCHÉMAS HyDRAULIQUES

HyDRAULIKPLÄNE

HYDRAULIC DIAGRAMS 132-134

ESQUEMAS HIDRÁULICOS

NAME: Coffee machine, CLASSE 10 series

MODEL: USB - S - RE

VERSIONS: 2 - 3 - 4 GROUPS

The label illustrated on the EC Declaration of Conformity of this instruction manual corresponds to the identi-

cation label placed on the machine Fig. 2. (Pos. A).

Label identication (Fig.1):

1 Manufacturer

2 Model and version

3 Voltage

4 EC conformity mark (if required)

5 Serial number

6 Boiler data

7 Machine total absorption

8 Protection level

9 Motor power

10 Heating element power

11 Frequency

12 Conformity marks

13 year of manufacture



Warning signal. The instructions which refer to this signal must be followed with great care in order to

avoid accidents or damage to the machine.

This manual is an integral and essential part of the product and must be delivered to the user. The warnings

contained in it must be read carefully, as they supply important indications relating to the safety of installation,

use and maintenance. Keep this manual for future reference.



● Don’t leave the packing elements (plastic bags,

expanded polystyrene, nails, cardboard, etc.)

within the reach of children, as these elements

are potential sources or danger.

● Check that the data on the machine corresponds

to that of the electrical supply network, before

connecting the equipment.

● Adaptors, multiple sockets and /or extensions must

not be used.

● In doubt, request an accurate control of the plant

by qualied personnel. The electric plant must be

provided with the following safety devices:

- efcient earth connection;

- section of conductors suitable for absorption

capacity

- efficient earth leakage protection circuit

breaker.

● Install the machine on a water repellent surface

(laminate, steel, ceramic, etc.) away from heat

sources (oven, cooking stove, replace, etc.) and

in conditions in which the temperature may not go

below 5°C. KEEP WARM.

● Do not leave the machine exposed to atmosphe-

ric agents or place them in damp rooms such as

bathrooms.

● Do not obstruct the suction or dispersion grilles

and do not cover with cloths, etc.

● Keep the packed machine in a dry place, not

exposed to atmospheric agents and in conditions

in which the temperature does not go below 5°C.

Do not stack more than three items of the same kind.

Do not place heavy items on the packaging.

● In an emergency, such as the breaking out of a re,

unusual noise, overheating, etc., take immediate

action, disconnecting the power and closing gas

and water taps.

● Only use original spare parts in order to avoid

compromising the safety and proper functioning

of the machine.

Erroneous installation can cause damage

to people, animals and things for which the

manufacturer cannot be considered respon-

sible



Legend:

A Semiautomatic system; manual dispensing start

and stop.

B Automatic system; electronic control of coffee

and hot water doses dispensed.

C N. of coffee dispensing units.

D N. of steam spouts.

E N. of hot water spouts.

F Operating with economizer.

Gas heating, on request.

1 Steam tap (C-LEVER)

2 Steam spout

3 Function/service button panel

4 Hot water spout thermoregular

5 Coffee dispensing unit

6 Coffee dispensing button panel (mod.S - USB)

7 Manual water supply tap

8 Level indicator

9 Gauge

10 Power on-off switch and led

11 Gas lighter (on specic models)

12 Valved gas tap (on specic models)

13 Switch and boiler resistance engagement light.

14 Bottom unit door for access to controls

15 Display (mod.UDB)

16 Programming panel (mod. USB)

17 Hot water spout

18 Dispenser control lever (mod.RE)

19 Unit door opening lever

20 USB connection

21 iSteam dispenser nozzle

 (Fig.3 - 4)



The machines in the CLASSE 10 series have been

designed to prepare express coffee and hot beve-

rages.

A positive-displacement pump inside the machine

powers the heater in which the water is heated. By

pressing the appropriate buttons, water is supplied

to the spouts in the form of hot water or steam, ac-

cording to needs.

The hot water used to make drinks comes from the

boiler and is mixed directly with cold water from the

water outlet.

The machine is composed of a steel carrying struc-

ture on which the mechanical and electrical compo-

nents are tted. These are completely covered with

panels made of aluminium.

The beverages are dispensed at the front of the

machine, where all the buttons, control devices and

dispensers are to be found.

There is a cup-warming plate on the top of the ma-

chine.

Models equipped with gas connections (when applied).

A B C D E F

USB

- ok 2 - 3 - 4 2 2 ok

ok - 2 - 3 - 4 2 2 ok

2 GROUP 3 GROUP 4 GROUP

 1 1 1

 2 3 4

Filters 3 4 5

 1 1 1

 1 1 1

 1 1 1

Pipe connections 1 1 1

Blind disks for cleaning 2 3 4

Doser and presser 1 1 1

Instruction manual 1 1 1

Brush 1 1 1



The machine is equipped with the following protective

devices:

● complete panelling protection of all the parts

subject to heat and of the steam and hot water

supplier;

● cup-warmer plate supplied with a tray to collect

spilt liquids;

● work surface provided with grill and tray to collect

spilt liquids;

● expansion valve in the hydraulic system and valve

on the boiler to avoid overpressure;

● nonreturn valve on the hydraulic system to avoid

owing back to the main supply.



The safety devices provided are:

● 12V low tension push buttons an the USB control

key panel;

● thermal protection on the pump motor;

● gas failure thermocouple and thermocouple ther-

mostat automatically closing gas tap;

● safe resistance thermal;

● Electronic safety devices.



Noise level in the working place does not usually

exceed 70dB(A).



The machine is supplied with rubber vibration dam-

ping feet. In normal working conditions, the machine

does not produce vibrations harmful to the operator

and the environment.



(Fig.5)

You’ll nd all the technical data on electric

connection, on the machine identication

label Fig. 1.

Machines provided with gas heating have a standard

connection kit to carry out the following connections

with:

- direct stiff pipe;

- copper and double cone pipe;

- rubber support.

Gas connections must be made in complian-

ce with the safety regulations in force in the

relative country.



The machine have been designed, manufactured and

protected to be used to make express coffee and hot

beverages (tea, cappuccino, etc.). Any other use is to

be considered unsuitable and therefore dangerous.

The manufacturer cannot be held responsible for

any damage caused to people or things

due to unsuitable, erroneous or irrational

use of the machine.

The operator must always follow the indications

contained in this manual. In the case of a failure or if

the machine is not working properly, switch it off and

do not attempt any direct repair. Refer exclusively

to a service centre.

2 GROUP 3 GROUP 4 GROUP

A mm 780 1020 1260

B mm 700 940 1180

C mm 540 540 540

D mm 470 470 470

H mm 530 530 530

 11 16 22

 76 94 112

 3/8” 3/8” 3/8”

Ømm drainage 14 14 14

Packaging



0,44 0,55 0,67

Dimensions L x P x H mm 910x670x720 1150x670x720 1390x670x720

 91 111 134



The appliance is only to be installed in

locations where use and maintenance is

restricted to trained personnel.

The machines are tted with height adjustable feet.

The support surface shall be levelled, dry, smooth,

steady and stable and at such a height that the cup-

warming surface is at over 150 cm from ground. Do not

use water jets or install where water jets are used.

In order to guarantee normal operation, the machine

must be installed in areas that the environmental

temperature is between +5°C ÷ +32°C end humidity

of not over 70%.

It does not need to be anchored to the surface and it

does not require any technical operations to dampen

vibrations in order to operate properly.

It is recommended to leave the area around the ma-

chine free to facilitate its use and the performance

of any maintenance operations.

If the machine is wet or very damp, wait until it is

completely dry before installing or using it. It is always

necessary to request an accurate control to qualied

service people in order to nd any possible damage

to the electric components.

Reserve an area near the machine for the installa-

tion of the coffee grinding and dosage machine (see

relevant documentation).

The machine is usually equipped with a water sof-

tener, type DP2 or DP4, which must be connected

by the user in compliance with the laws in force.

Should a different softener be installed, refer to the

documentation of the relevant product.

A dreg drawer should be tted by the installer.



user

Hook-up must be carried out by qualied

personnel in full accordance with federal,

state and local regulations.

 (Fig.6)

This equipment is to be installed to

comply with the applicable federal, state

or local plumbing codes.

Connections must be installed close to the machine.

● Water drainage pipe 1, having a minimum internal

diameter of 30 mm, equipped with a water-trap

accessible for inspection.

● Water supply pipe 2, with a 3/8"G cut-off tap.

● Gas supply pipe 3, with a cutoff tap.

Make sure that the maximum supply pressure

does not exceed 6.5 bar; otherwise, install a

pressure reducer.

The machine with gas heating must be instal-

led in compliance with current local laws.





The machine is delivered in a strong cardboard box

with internal protection.

The packaging bears symbols which must be obser-

ved during handling and stocking of the item.

Always keep the package in a vertical position

during transport. Do not turn it over or lay it

on its side and avoid bumping and exposure

to atmospheric agents.



Check that the machine received corresponds to

the one indicated on the delivery note, including any

accessories.

Check that it has not been damaged during transport

and, if so, inform the forwarder and our customer

service ofce immediately.

The packing elements (plastic bags, expan-

ded polystyrene, nails, cardboard, etc.) must

not be left within reach of children as they are

potential sources of danger. Do not dispose

of the packing elements in the environment;

consign them to rms authorized for their

disposal.

The user must not:

● touch the hot surfaces and dispensing areas;

● place liquids containers on the machine;

● put his hands under the spouts during use;

● transport the machine or carry out maintenance

operations when the plug is connected or when

the machine is hot;

● wash the machine with water or steam jet;

● dip completely or partially the machine in water;

● use the machine if the cable is damaged;

● touch the machine when his hands or feet are wet

or damp;

● use the machine when there are children in its

proximity;

● allow the machine to be used by children or unt

people;

● obstruct the suction or dispersal grilles with cloth

or any other thing;

● do not use the machine when wet or very damp.



This machine may only be used with foodstuffs. It

cannot be used for heating liquids or grinding any other

kind of product that could damage and pollute it.

The manufacturer cannot be held responsible

for damage to people or things caused by

unsuitable, erroneous or irrational use.



The machine is supplied ready for connection

according to the required electrical specications.

Before connecting the machine ensure that the plate

details comply with those of the electric distribution

network.

The electrical connection cable must be directly

connected to the connection provided according to

current legislation. Ensure that the earthing system

is efcient and in compliance with current legal re-

quirements.

The earthing system and the lightening protection

system must be realized in accordance with the

provisions of current legislation.

For the supply network use a cable in compliance with

standards with protective conductor (earthing wire).

For three-phase power use a cable with 5 conductors

( 3 phases + neutral + earth).

For single phase power supply use a cable with 3

conductors (phase + neutral + earth).

In both cases it is necessary to provide an automatic

differential switch () at the start of the power

cable, complete with magnetic release elements in

accordance with the identication plate details (

1). The contacts must have an opening of equal or

over 3 mm and with dispersed current protection of

30 mA.

Remember that each machine must be tted with its

own safety elements.



Should the power supply cable be damaged

it is to be replaced by the manufacturer or by

its technical assistance service or by person

with equivalent qualication, in order to pre-

vent any risks.

(Fig.7)

P O T E N T I A L - E Q U A L I Z I N G

CONNECTION

This connection, which is the one called for by several

norms, avoids electrical potential differences, building

up between any equipment that may be installed in

the same room. There is a terminal clip on the under

side of the base of the machine to which an external

potential-equalizing wire should be connected.

This connection is ABSOLUTELY NECESSARY and

must be made right after the machine is installed.

Use a wire whose cross-sectional area conforms to

the existing norms.

CONNECTIONS

● Place the machine on the horizontal surface pre-

viously prepared.

Before connecting, thoroughly wash the mains water

pipes:

● Leave the water supply taps running at full pres-

sure for several minutes.

● Connect to the mains water supply.

● Connect the machine to the socket.

● Connect the gas pipe

Thoroughly wash all the water pipes of the machine:

● Leave the water supply taps running at full pres-

sure.

● Switch on main switch 1 (Fig.8): wait until the boiler

lls up to the level set.

● Boiler resistance switch2 (Fig.8) to begin heating

the water in the boiler.

● Operate each unit in order to allow the water to

escape for about one minute; repeat the operation

twice.

● Deliver steam from the steam jets for about one

minute.

● Deliver hot water for about one minute; repeat the

operation twice.

● Switch off switches 1 and 2.

● Empty the water from the boiler: see point 10.3.

IMPORTANT

Should the machine not deliver water for over

24 hours, wash the internal components be-

fore beginning work, repeating the operations

as described above.

OPERATION

 (Fig.8)

 

Two-position switch with led.

Turn on the switch (led on) the machine is turned

(apart from the boiler) and the pump is turned on

to ll the boiler;

 

Two-position switch with led.

On activating the switch (the led comes on) and

power is supplied to the resistance for the boiler

water.

  (mod.S)

Two-position switch:

With switch ON, coffee is dispensed;

With switch OFF, dispensing of coffee is interrup-

ted.

4 Dispenser control lever (mod.RE)

Move the lever downward to start dispensing cof-

fee.

To stop dispensing, move the lever upward.

5 Coffee Dispensing Electronic Panel (mod. USB)

Five buttons with relative led:

A Press the button for a second, led on, release

button; a small coffee is dispensed.

The led turns off and dispensing ceases.

B Press the button for a second, led on, release

the button; two small coffees ar dispensed from

the same unit.

The led turns off and dispensing ceases.

C Press the button for a second, led on, release

the button; a big cup of coffee is dispensed.

The led turns off and dispensing ceases.

D Press the button for a second, led on, release

the button; two big cups of coffee are dispensed

from the same unit.

The led turns off and dispensing ceases.

E Press the button for a second, led on, release

the button; coffee is continuously dispensed.

Press the button for a second, led off, release

button; continuous dispensing of coffee ceases.

To interrupt brewing once the operation has been

activated with buttons A-B-C-D, press the same

button again or press E.

Each time a coffee is dispensed, the LED of the

relative button lights up.

If pressed for approx. 8 sec., the dose quantity

programming function is accessed.

During dose programming, the LED of the 5

button ashes rapidly.

If the dose is supplied irregularly or the volumetric

counter is malfunctioning, the LED of the pressed

button ashes dispensing the dose on a time ba-

sis.

 (mod.S-RE)

 Cup-warmer switch with two positions:

With switch ON, the LED ashes and the cup

warmer resistance is energized.

With switch OFF, the LED switches off and the

resistance is de-energized.

 Two-position hot water switch (thermoregula-

ted):

With switch ON, the LED ashes and thermore-

gulated hot water is dispensed.

With switch OFF, the LED switches off and dispen-

sing stops.

 Hot water switch (picking up directly from the

boiler) with two positions:

With switch ON, the LED ashes and hot water is

dispensed directly from the boiler.

With switch OFF, the LED switches off and dispen-

sing stops.

(mod.USB)

This panel features 5 buttons and 5 LEDs consi-

sting of the following:

1 cup-warmer button (7.1)

2 buttons for dispensing hot water (7.2 - 7.3)

3 keys for dispensing hot water blended with the

temperature control function (7.3 - 7.4 - 7.5)



The function provides for 4 setting levels of resi-

stance heating strength:

off, minimum, medium, maximum (pls. consult par.

9.5).



When the button is pressed, hot water is dispensed

directly from the boiler for the set time or until the

button is pressed again.

If the key is kept pressed in for 2 seconds, the

dispensing ow becomes continuous and it will

stop only if the key is pressed in again.

The dispensing ow is anyway stopped automati-

cally after 30 sec.

-

rature control function (4-TEA)

Pressing on any one of the keys will start dispen-

sing of the temperature-controlled water for the set

amount of time, or until the key is pressed in again.

During this dispensing cycle, the pump starts up.

The default programming of the 3 keys provides

for different water temperatures, ranging between

85°C (7.3) and 60°C (7.5). The temperatures and

the dispensing times can anyway be program-

med. It is also possible to set a dispensing option

providing cold water taken directly from the water

mains line.

If the key is kept pressed in for 2 seconds, the di-

spensing ow becomes continuous and it will stop

only if the key is pressed in again. The dispensing

ow is anyway stopped automatically after 30

seconds.



● Turn on the water supply tap 2 Fig.6.

● Turn the main switch 1; the pump is activated, lling

the boiler.

● When the water reaches the correct level, the pump

stops.

Turn the main switch 2 to begin heating the water

in the boiler then turn each one until water begins

to ow from them.

● Wait for the machine to reach its working pressure

and to reach the correct thermal balance.

(Fig.8)

● Turn on the water supply tap 2 (Fig.6).

● Turn on the gas tap 3 (Fig.6).

●Turn the main switch 1; the pump is activated, lling

the boiler.

● When the correct level is reached, the pump stops.

Turn the switch 2.

● Turn the gas tap 10 to the vertical open position

and hold down the incorporated button, at the same

time repeatedly press hard on the piezelectric but-

ton 11 until the spark lights the gas ame (carry out

this operation looking through window 14). Hold

the tap button 10 down for approx. 30 seconds to

allow the safety system to keep the ame lighted.

If the ame goes out, repeat the operation.

Should the ame not light up, avoid insisting

and close the gas tap by turning it 90° in a

clockwise direction.

● Wait until the machine reaches its working pressure

and until the correct thermal balance is achieved.



Press the button to excite the steam and emulsion

delivery electromagnetic valves until the program-

med temperature and froth level are reached or

until the function is switched off.



Pressing the key excites the steam distribution

electro-valves until the programmed temperature

is reached or until the same is pressed again.



Dispensing cannot be carried out if the machine

has not reached the operating pressure or tempe-

rature at least once, and each time that the boiler

pressure drops too much.

 

Rotating the turn-knob upwards will open the tap;

the turn-knob will remain in open position to allow

for a continuous steam supply. To close the tap,

turn the turn-knob back into its horizontal position.

Rotating the turn-knob downwards provides for

instant steam supply. Once it is released, the turn-

knob will go back into its horizontal position and

the steam supply is instantly stopped.

 -



Press down to ll the boiler.

 (models with gas heating).

Open: vertical position;

Closed: turn 90° in clockwise direction.

 (models with gas heating).

Firing button: press down rmly to give off the

spark to light the gas for the burner.

 (Fig.8)

12 Gauge with mobile needle on a xed dial with a

double scale.

Visual control of the pump (manometer on the left-

hand side) and of the boiler pressure (manometer

on the right-hand side)

13 Minimum and maximum water 

Visual control of water level in boiler.

(models with gas heating).

Visual control of lighting and functioning of the

ame of the gas burner.



The machine has a top shelf on which the cups are

kept and heated, ready for use.

This is very important to obtain good coffee as the

pre-warmed cup stops the coffee from growing cold

too quickly.



● Unclamp the lter-holder from the dispensing unit

and knock any grouts out into the drawer espe-

cially provided for this purpose, taking care not to

damage the rim of the lter.

● Use the filter for 1 or 2 coffees, according to

need.

● Fill the lter with the measure of coffee, level it off

and press it down gently with the presser.

● Remove any ground coffee that has stuck to the

rim of the lter while pressing.

If ground coffee is left on the rim of the lter, a

leaktight seal is not ensured, with consequent

leaking of water and coffee grounds.

● Lock the lter-holder into the dispensing unit rmly

to obtain a leaktight seal.

● Place the cups under the spouts and start pouring

using control 3 - 4 or button panel 5 according to

model (Fig.9).

● When the coffee has been poured, leave the lter-

holder attached to the dispensing unit until the next

coffee is required.

When pouring, beware of the hot parts of the

machine, especially the coffee dispensing

units, the steam and hot water spouts. Do not

put your hands for any reason under the units

and the spouts when they are operating.

The grinding of the coffee beans is of fundamental

importance to the making of good coffee, and the

granular texture of the resulting grounds should

be such that it takes 25-30 seconds to produce the

beverage. If the coffee is ground too coardsely the

coffee will be pale in colour and weak in avour, with

only a very small amount of white cream, and if the

grounds are too ne, the coffee will be dark with no

cream. Good coffee can only be made if the beans

are freshly and uniformly ground (only possible when

the blades of the coffee grinder are sharp) and are

then measured out into the correct quantities (roughly

6 grams per measure).

The importance of freshly ground coffee beans is

due to the fact that once ground, they rapidly lose

their aromatic qualities, and fats present in the beans

go rancid.

 (Fig.9)

● Make cup of cappuccino with the express coffee.

● Use a high and narrow jug, half-lled with milk.

●Place the jug under the spout so that the nozzle

touches the bottom.

● Turn on the steam tap and lower the jug so that

the nozzle is almost at the surface of the milk.

● Now, raise and lower the vessel constantly so that

the steam nozzle is immersed in and out of the

milk to create the froth.

● Turn off the steam tap and pour the milk into the

cup.

Immediately after carrying out this operation,

clean the spout with a sponge or a clean

cloth so that the milk does not dry on it. Be

careful as the spout is hot and may burn

your hand.



● Immerse the steam spout into the liquid to be

heated.

● Gradually turn on the steam tap 8 Fig.8; the steam

that bursts in the liquid heats it to the desired tem-

perature.

● Turn off the steam tap when the desired tempera-

ture has been reached.

Immediately after carrying out this operation,

clean the spout with a sponge or clean cloth.

Be careful as the spout is hot and may burn

your hand



● Place the jug under the hot water spout and use

the delivery control according to the model (Fig.8).

When the desired quantity has been obtained, turn

off the switch.

● Add the beverage desired.

Models USBFor these models, hot water is dispensed

in specic measures (see paragraph 9, adjusting

the dose of hot water).

To dispense hot water in different quantities, proceed

as follows:

● Hold down the delivery control 7.2 o 7.3 o 7.4 o 7.5

(Fig.8) for at least four seconds then release the

button; the machine continuously delivers water.

● When the desired measure has been obtained,

press the button E again to interrupt delivery.

When the dose of hot water is being delivered electro-

nically, delivery can be interrupted by pressing the

button 7.3.

When puried water is used, these beverages often

assume a darker colour.

Should the user prefer a lighter coloured drink, draw

fresh water from an ordinary tap and proceed with

the heating phase as described in point 8.3.

La pagina sta caricando ...

Rancilio Classe 10S Use And Maintenance

Marca: Rancilio

Modello: Classe 10S

Categoria: Accessori per la preparazione del caffè

Tipo: Use And Maintenance

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Rancilio Classe 10S

Rancilio Classe 10S Use And Maintenance

Questo manuale è adatto anche per

Rancilio Classe 10S Use And Maintenance

in altre lingue

Documenti correlati

Altri documenti