Zanussi ZEI6640FBA Manuale utente

Categoria
Piani cottura
Tipo
Manuale utente
EN
User manual 2
IT
Istruzioni per l’uso 17
Hob
Piano cottura
ZEI6640FBA
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11
Installation instructions _ _ _ _ _ _ _ _ _ _ _ 12
Technical information _ _ _ _ _ _ _ _ _ _ _ _ 15
Environment concerns _ _ _ _ _ _ _ _ _ _ _ 15
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an in-
correct installation and use causes injuries and damages. Always
keep the instructions with the appliance for future reference.
Children and vulnerable people safety
Warning! Risk of suffocation, injury or permanent disability.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental ca-
pabilities or lack of experience and knowledge if they are super-
vised by an adult or a person who is responsible for their safety.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it operates
or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, we recommend that you
activate it.
Cleaning and user maintenance shall not be made by children
without supervision.
General Safety
The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
Do not operate the appliance by means of an external timer or
separate remote-control system.
2
www.zanussi.com
Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
Never try to extinguish a fire with water, but switch off the appli-
ance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Do not use a steam cleaner to clean the appliance.
Metallic objects such as knives, forks, spoons and lids should not
be placed on the hob surface since they can get hot.
If the glass ceramic surface is cracked, switch off the appliance to
avoid the possibility of electric shock.
After use, switch off the hob element by its control and do not rely
on the pan detector.
Safety instructions
Installation
Warning! Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Keep the minimum distance from the other
appliances and units.
Always be careful when you move the appli-
ance because it is heavy. Always wear safety
gloves.
Seal the cut surfaces with a sealant to pre-
vent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
If the appliance is installed above drawers
make sure that the space, between the bot-
tom of the appliance and the upper drawer,
is sufficient for air circulation.
Make sure that the ventilation space of 2 mm,
between the worktop and the front of the be-
low unit, is free. The warranty does not cover
damages caused by the lack of an adequate
ventilation space.
The bottom of the appliance can get hot. We
recommend to install a non-combustile sepa-
ration panel under the appliance to prevent
access to the bottom.
Electrical connection
Warning! Risk of fire and electrical shock.
All electrical connections must be made by a
qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure the mains cable or plug (if appli-
cable) does not touch the hot appliance or
hot cookware, when you connect the appli-
ance to the near sockets
3
www.zanussi.com
Make sure the appliance is installed correct-
ly. Loose and incorrect electricity mains ca-
ble or plug (if applicable) can make the termi-
nal become too hot.
Make sure that a shock protection is instal-
led.
Use the strain relief clamp on cable.
Make sure not to cause damage to the mains
plug (if applicable) or to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
The electrical installation must have an isola-
tion device which lets you disconnect the ap-
pliance from the mains at all poles. The isola-
tion device must have a contact opening
width of minimum 3 mm.
Use only correct isolation devices: line pro-
tecting cut-outs, fuses (screw type fuses re-
moved from the holder), earth leakage trips
and contactors.
Use
Warning! Risk of injury, burns or electric
shock.
Use this appliance in a household environ-
ment.
Do not change the specification of this appli-
ance.
Do not use an external timer or a separate re-
mote-control system to operate the appli-
ance.
Do not let the appliance stay unattended
during operation.
Do not operate the appliance with wet hands
or when it has contact with water.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
Do not use the appliance as a work surface
or as a storage surface.
If there is a crack on the surface, disconnect
power supply to prevent the electrical shock.
Users with a pacemaker must keep a dis-
tance of minimum 30 cm from the induction
cooking zones when the appliance is in oper-
ation.
Warning! Risk of fire or explosion.
Fats and oil when heated can release flam-
mable vapours. Keep flames or heated ob-
jects away from fats and oils when you cook
with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants, can
cause fire at a lower temperature than oil
used for the first time.
Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
Do not try to extinguish a fire with water. Dis-
connect the appliance and cover the flame
with a lid or a fire blanket.
Warning! Risk of damage to the
appliance.
Do not keep hot cookware on the control
panel.
Do not let cookware to boil dry.
Be careful not let objects or cookware fall on
the appliance. The surface can be damaged.
Do not activate the cooking zones with emp-
ty cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or
with a damaged bottom can cause scratches
on the glass ceramic. Always lift these ob-
jects up when you have to move them on the
cooking surface.
Care and Cleaning
Warning! Risk of damage to the
appliance.
Clean regularly the appliance to prevent the
deterioration of the surface material.
Do not use water spray and steam to clean
the appliance.
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
4
www.zanussi.com
abrasive products, abrasive cleaning pads,
solvents or metal objects.
Disposal
Warning! Risk of injury or suffocation.
Contact your municipal authority for informa-
tion on how to discard the appliance correct-
ly.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Product description
General overview
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1
Induction cooking zone
2
Induction cooking zone
3
Induction cooking zone
4
Control panel
5
Induction cooking zone
Control panel layout
1 2 3
89
7
5
4 6
Use the sensor fields to operate the appliance. The displays,
indicators and sounds tell which functions operate.
Sensor field Function
1
To activate and deactivate the appliance.
2
To lock / unlock the control panel.
3
To activate the Power function.
5
www.zanussi.com
Sensor field Function
4
A heat setting display. To show the heat setting.
5
Timer indicators of cooking zone. To show for which zone you set the time.
6
The timer display. To show the time in minutes.
7
/
To increase or decrease the heat setting.
8
/
To increase or decrease the time.
9
To select a cooking zone.
Heat setting displays
Display Description
The cooking zone is deactivated.
The Keep Warm function operates.
-
The cooking zone operates.
The Automatic Heat-up function operates.
The cookware is incorrect or too small, or there is no cookware on the cook-
ing zone.
There is a malfunction.
A cooking zone is still hot (residual heat).
The Lock / The Child Safety Device operates.
The Power function operates.
The Automatic Switch-Off operates.
Residual heat indicator
Warning!
The risk of burns from
residual heat!
The induction cooking zones make the heat
necessary for cooking directly in the bottom of
the cookware. The glass ceramic is hot from
the heat of the cookware.
Daily use
Activation and deactivation
Touch for 1 second to activate or deactivate
the appliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
All cooking zones are deactivated (
).
You do not set the heat setting after you acti-
vate the appliance.
You spill something or put something on the
control panel for more than 10 seconds, (a
pan, a cloth, etc.). An acoustic signal sounds
some time and the appliance deactivates.
Remove the object or clean the control pan-
el.
The appliance becomes too hot (e.g. when, a
saucepan boils dry). Before you use the ap-
pliance again, the cooking zone must be
cool.
6
www.zanussi.com
You use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
You do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the appliance deactivates.
See below.
The relation between heat setting and times
of the Automatic Switch Off function:
, - — 6 hours
- — 5 hours
— 4 hours
- — 1.5 hours
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch
and at the
same time to deactivate the cooking zone.
Automatic Heat Up
You can get a necessary heat setting in a
shorter time if you activate the Automatic Heat
Up function. This function sets the highest heat
setting for some time (see the diagram), and
then decreases to the necessary heat setting.
To start the Automatic Heat Up function for a
cooking zone:
1.
Touch
. The symbol comes on in the
display.
2.
Immediately touch
. The symbol
comes on in the display.
3.
Immediately touch
again and again until
the necessary heat setting comes on. After
3 seconds
comes on in the display.
To stop the function, touch
.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
Power function
The Power function makes more power availa-
ble to the induction cooking zones. The Power
function can be activated for a limited period of
time ( see Technical Information chapter). After
that, the induction cooking zone automatically
sets back to highest heat setting. To activate,
touch
, comes on. To deactivate, touch
or .
Power management
The power management divides the power be-
tween two cooking zones in a pair (see the il-
lustration). The power function increases the
power to the maximum level for one cooking
zone in the pair. The power in the second cook-
ing zone automatically decreases. The heat set-
ting display for the reduced zone changes be-
tween two levels.
7
www.zanussi.com
Timer
Count Down Timer
Use the Count Down Timer to set how long the
cooking zone operates for only this one time.
Set the Timer after the selection of the
cooking zone.
You can set the heat setting before or after you
set the timer.
To set the cooking zone: touch
again
and again until the indicator of a necessary
cooking zone comes on.
To activate or change the Timer: touch
or of the timer to set the time (
00
-
99
minutes). When the indicator of the
cooking zone starts to flash slow, the time
counts down.
To deactivate the Timer: set the cooking
zone with
and touch to deactivate the
Timer. The remaining time counts back to
00
. The indicator of the cooking zone goes out.
To see the remaining time: set the cook-
ing zone with
. The indicator of the cook-
ing zone starts to flash quickly. The display
shows the remaining time.
When the time comes to an end, the sound op-
erates and
00
flashes. The cooking zone deac-
tivates.
To stop the sound: touch
Minute Minder
You can use the Timer as a Minute Minder
while the cooking zones do not operate. Touch
. Touch or to set the time. When the
time comes to an end, the sound operates and
00
flashes
To stop the sound: touch
Lock
When the cooking zones operate, you can lock
the control panel, but not
. It prevents an ac-
cidental change of the heat setting.
First set the heat setting.
To start this function touch
. The symbol
comes on for 4 seconds.
The Timer stays on.
To stop this function touch
. The heat set-
ting that you set before comes on.
When you stop the appliance, you also stop
this function.
The Child Safety Device
This function prevents an accidental operation
of the appliance.
To activate The Child Safety Device
Activate the appliance with
. Do not set
the heat settings.
Touch
for 4 seconds. The symbol
comes on.
Deactivate the appliance with
.
To deactivate The Child Safety Device
Activate the appliance with
. Do not set
the heat settings. Touch
for 4 seconds.
The symbol
comes on.
Deactivate the appliance with
.
To override The Child Safety Device for
only one cooking time
Activate the appliance with
. The symbol
comes on.
Touch
for 4 seconds. Set the heat set-
ting in 10 seconds. You can operate the
appliance.
When you deactivate the appliance with
,
The Child Safety Device operates again.
Helpful hints and tips
INDUCTION COOKING ZONES
For induction cooking zones a strong electro-
magnetic field creates the heat in the cookware
very quickly.
8
www.zanussi.com
Cookware for induction cooking zones
Important! Use the induction cooking zones
with correct cookware.
Cookware material
correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multi-lay-
er (with correct mark from a manufacturer).
not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if …
... some water boils very quickly on a zone
set to the highest heat setting.
... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions: induction cooking
zones adapt to the dimension of the bottom of
the cookware automatically to some limit.
The noises during operation
If you can hear
crack noise: cookware is made of different
materials (Sandwich construction).
whistle sound: you use one or more cooking
zones with high power levels and the cook-
ware is made of different materials (Sand-
wich construction).
humming: you use high power levels.
clicking: electric switching occurs.
hissing, buzzing: the fan operates.
The noises are normal and do not refer to
appliance malfunction.
Energy saving
How to save energy
If it is possible, always put the lids on the
cookware.
Put cookware on a cooking zone before you
start it.
Use the residual heat to keep the food warm
or to melt it.
The cooking zone efficiency
The cooking zone efficiency is related to the di-
ameter of the cookware. The cookware with a
smaller diameter than the minimum receives on-
ly a part of the power generated by the cooking
zone. For the minimum diameters see the Tech-
nical Information chapter.
The Examples of cooking applications
The relation between the heat setting and the
cooking zone consumption of power is not line-
ar.
When you increase the heat setting it is not
proportional to the increase of the cooking zone
consumption of power.
It means that the cooking zone with the medium
heat setting uses less than a half of its power.
The data in the table is for guidance only.
Hea
t
set-
ting
Use to: Time Hints Nominal pow-
er consump-
tion
1
Keep warm the food you
cooked
as required Put a lid on a cookware 3 %
1 - 2 Hollandaise sauce, melt: but-
ter, chocolate, gelatine
5 - 25 min Mix from time to time 3 – 5 %
1 - 2 Solidify: fluffy omelettes, baked
eggs
10 - 40 min Cook with a lid on 3 – 5 %
9
www.zanussi.com
Hea
t
set-
ting
Use to: Time Hints Nominal pow-
er consump-
tion
2 - 3 Simmer rice and milkbased
dishes, heating up ready-
cooked meals
25 - 50 min Add the minimum twice as
much liquid as rice, mix milk
dishes part procedure
through
5 – 10 %
3 - 4 Steam vegetables, fish, meat 20 - 45 min Add some tablespoons of
liquid
10 – 15 %
4 - 5 Steam potatoes 20 - 60 min Use max. ¼ l water for 750 g
of potatoes
15 – 21 %
4 - 5 Cook larger quantities of food,
stews and soups
60 - 150 min Up to 3 l liquid plus ingredi-
ents
15 – 21 %
6 - 7 Gentle fry: escalope, veal cor-
don bleu, cutlets, rissoles,
sausages, liver, roux, eggs,
pancakes, doughnuts
as necessary Turn halfway through 31 – 45 %
7 - 8 Heavy fry, hash browns, loin
steaks, steaks
5 - 15 min Turn halfway through 45 – 64 %
9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips 100 %
Boil large quantities of water. Power management is activated.
Information on acrylamides
Important! According to the newest scientific
knowledge, if you brown food (specially the one
which contains starch), acrylamides can pose a
health risk. Thus, we recommend that you cook
at the lowest temperatures and do not brown
food too much.
Care and cleaning
Clean the appliance after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the glass-ce-
ramic cause no effect on how the appli-
ance operates.
To remove the dirt:
1. Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the appli-
ance. Use a special scraper for the
glass . Put the scraper on the glass sur-
face at an acute angle and move the
blade on the surface .
Remove after the appliance is suffi-
ciently cool: limescale rings , water
rings, fat stains, shiny metallic discolora-
tions. Use a special cleaning agent for
glass ceramic or stainless steel.
2. Clean the appliance with a moist cloth and
some detergent.
3. At the end rub the appliance dry with a
clean cloth.
10
www.zanussi.com
Troubleshooting
Problem Possible cause Remedy
You cannot activate the appliance
or operate it.
Activate the appliance again and
set the heat setting in less than 10
seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
There is water or fat stains on the
control panel.
Clean the control panel.
An acoustic signal sounds and the
appliance deactivates.
An acoustic signal sounds when
the appliance is deactivated.
You put something on one or
more sensor fields.
Remove the object from the sensor
fields.
The appliance deactivates. You put something on the sensor
field
.
Remove the object from the sensor
field.
The residual heat indicator does
not come on.
The cooking zone is not hot be-
cause it operated only for a short
time.
If the cooking zone operated suffi-
ciently long to be hot, speak to the
service centre.
The heat setting changes between
two levels.
The Power management is acti-
vated.
Refer to “Power management”.
The sensor fields become hot. The cookware is too large or you
put it too near to the controls.
Put large cookware on the rear
cooking zones if necessary.
comes on.
The Automatic Switch Off oper-
ates.
Deactivate the appliance and acti-
vate it again.
comes on.
The Child Safety Device or the
Lock function operates.
Refer to the chapter “Daily Use”.
comes on.
No cookware is on the cooking
zone.
Put cookware on the cooking zone.
The cookware is incorrect. Use the correct cookware.
The diameter of the bottom of the
cookware is too small for the
cooking zone.
Move cookware to a smaller cook-
ing zone.
and a number come on.
There is an error in the appliance. Disconnect the appliance from the
electrical supply for some time.
Disconnect the fuse from the elec-
trical system of the house. Connect
it again. If
comes on again,
speak to the service centre.
11
www.zanussi.com
Problem Possible cause Remedy
comes on.
There is an error in the appliance
because a cookware boils dry.
The overheating protection for the
cooking zones and the Automatic
Switch Off operate.
Deactivate the appliance. Remove
the hot cookware. After, approxi-
mately 30 seconds, activate the
cooking zone again. If the cook-
ware was the problem, the error
message goes out of the display,
but the residual heat indicator can
stay. Let the cookware become
sufficiently cool and refer to
“Cookware for the induction cook-
ing zone” to see if your cookware
is compatible with the appliance.
If you tried the above solutions and cannot re-
pair the problem, speak to your dealer or the
customer service. Give the data from the rating
plate, three digit letter code for the glass ce-
ramic (it is in the corner of the glass surface)
and an error message that comes on.
Make sure, you operated the appliance correct-
ly. If not the servicing by a customer service
technician or dealer will not be free of charge,
also during the warranty period. The instruc-
tions about the customer service and condi-
tions of guarantee are in the guarantee booklet.
Installation instructions
Warning! Refer to "Safety information"
chapter.
Before the installation
Before the installation of the appliance, record
the information below from the rating plate. The
rating plate is on the bottom of the appliance
casing.
Model ...........................
PNC .............................
Serial number ....................
Built-in appliances
Only use the built-in appliances after you as-
semble the appliance into correct built-in
units and work surfaces that align to the
standards.
Connection cable
The appliance is supplied with the connec-
tion cable.
Replace the damaged mains cable with a
special cable (type H05BB-F Tmax 90°C; or
higher). Speak to your local Service Centre.
12
www.zanussi.com
Assembly
min.
50mm
min.
500mm
min.
2mm
< 20 mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min
30 mm
min. 500 mm
> 20 mm
min. 2 mm
A
B
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
min. 500 mm
13
www.zanussi.com
490
+1
mm
560
+1
mm
R 5mm
55mm
min.
12 mm
min.
2 mm
min.
38 mm
min.
2 mm
14
www.zanussi.com
If you use a protection box (an additional ac-
cessory
1)
), the front airflow space of 2 mm and
protective floor directly below the appliance are
not necessary.
You can not use the protection box if you install
the appliance above an oven.
1) The protection box accessory may not be available in some countries. Please contact your local supplier.
Technical information
Model ZEI6640FBA Prod.Nr. 949 595 531 00
Typ 58 GAD D5 AU 220-240 V 50-60 Hz
Induction 7,4 kW Made in Germany
Ser.Nr. .......... 7,4 kW
ZANUSSI
Cooking zones power
Cooking zone Nominal Power
(Max heat set-
ting) [W]
Power Function
activated [W]
Power function
maximum dura-
tion [min]
Minimum cook-
ware diameter
[mm]
Right rear — 180
mm
1800 W 145
Right front — 145
mm
1400 W 2500 W 4 125
Left rear — 180
mm
1800 W 145
Left front — 210
mm
2300 W 3700 W 10 180
The power of the cooking zones can be differ-
ent in some small range from the data in the ta-
ble. It changes with the material and dimen-
sions of the cookware.
Environment concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
15
www.zanussi.com
household waste disposal service or the shop
where you purchased the product.
Packaging material
The packaging materials are friendly to the
environment and can be recycled. The
plastic components are identified by marking:
>PE<,>PS<, etc. Discard the packaging mate-
rials as household waste at the waste disposal
facilities in your municipality.
16
www.zanussi.com
Indice
Informazioni per la sicurezza _ _ _ _ _ _ _ _ 17
Istruzioni di sicurezza _ _ _ _ _ _ _ _ _ _ _ _ 18
Descrizione del prodotto _ _ _ _ _ _ _ _ _ _ 20
Utilizzo quotidiano _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22
Consigli e suggerimenti utili _ _ _ _ _ _ _ _ 24
Pulizia e cura _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 26
Risoluzione dei problemi _ _ _ _ _ _ _ _ _ _ 26
Istruzioni di installazione _ _ _ _ _ _ _ _ _ _ 28
Dati tecnici _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 30
Considerazioni ambientali _ _ _ _ _ _ _ _ _ 31
Con riserva di modifiche.
Informazioni per la sicurezza
Leggere attentamente le istruzioni fornite prima di installare e utiliz-
zare l'apparecchiatura. Il produttore non è responsabile se un'instal-
lazione ed un uso non corretto dell'apparecchiatura provocano lesio-
ni e danni. Tenere sempre le istruzioni a portata di mano in caso di
necessità durante l'utilizzo.
Sicurezza dei bambini e delle persone vulnerabili
Avvertenza! Rischio di soffocamento, lesioni o invalidità
permanente.
Questa apparecchiatura può essere usata da bambini a partire
dagli 8 anni e da adulti con limitate capacità fisiche, sensoriali o
mentali o con scarsa esperienza o conoscenza sull'uso dell'appa-
recchiatura, se sorvegliati o se sono stati istruiti relativamente al-
l'uso dell'apparecchiatura e hanno capito i rischi coinvolti.
Non consentire ai bambini di giocare con l'apparecchiatura.
Tenere i materiali di imballaggio al di fuori della portata dei bambi-
ni.
Tenere i bambini e gli animali domestici lontano dall'apparecchia-
tura durante il funzionamento o raffreddamento. Le parti accessi-
bili sono incandescenti.
Se l’apparecchiatura dispone di un dispositivo di sicurezza per i
bambini, consigliamo di attivarlo.
La pulizia e gli interventi di manutenzione non devono essere ese-
guiti dai bambini senza supervisione.
17
www.zanussi.com
Avvertenze di sicurezza generali
L'apparecchiatura e le parti accessibili si riscaldano molto durante
l'uso Non toccare le resistenze.
Non utilizzare un timer esterno o un sistema di controllo remoto
distinto per mettere in funzione l'apparecchiatura.
Non lasciare mai il piano di cottura incustodito durante la prepara-
zione di cibi in quanto olio e grassi potrebbero provocare un in-
cendio.
Non tentare mai di spegnere un incendio con dell'acqua; spegne-
re l'apparecchiatura e coprire le fiamme ad es. con un coperchio
o una coperta di protezione dal fuoco.
Non conservare nulla sulle superfici di cottura.
Non usare dispositivi per la pulizia a vapore per pulire l'apparec-
chiatura.
Oggetti metallici quali coltelli, forchette, cucchiai e coperchi non
dovrebbero essere posti sulla superficie del piano di cottura in
quanto possono diventare caldi.
Se la superficie di vetroceramica presenta delle crepe, spegnere
l'apparecchiatura per evitare il rischio di scossa elettrica.
Dopo l'uso, spegnere l'elemento utilizzato mediante la corrispon-
dente manopola, senza considerare quanto indicato dal rilevatore
di utensili.
Istruzioni di sicurezza
Installazione
Avvertenza! L’installazione
dell'apparecchiatura deve essere eseguita
da personale qualificato.
Rimuovere tutti i materiali di imballaggio.
Non installare o utilizzare l'apparecchiatura
se è danneggiata.
Attenersi alle istruzioni fornite insieme all'ap-
parecchiatura.
È necessario rispettare la distanza minima
dalle altre apparecchiature.
Fare sempre attenzione quando si sposta
l'apparecchiatura, perché è pesante. Indos-
sare sempre guanti di sicurezza.
Proteggere le superfici di taglio con un mate-
riale di tenuta per evitare che l'umidità causi
dei rigonfiamenti.
Proteggere la base dell'apparecchiatura da
vapore e umidità.
18
www.zanussi.com
Non installare l'apparecchiatura accanto ad
una porta o sotto una finestra, per evitare che
pentole calde cadano dall'apparecchiatura
quando la porta o la finestra sono aperte.
Se l'apparecchiatura viene installata sopra
dei cassetti, assicurarsi che lo spazio, tra la
base dell'apparecchiatura e il cassetto supe-
riore, sia sufficiente per il ricircolo d'aria.
Assicurarsi che lo spazio per il ricircolo d'aria
di 2 mm, tra il piano di lavoro e la parte ante-
riore dell'unità sottostante sia libero. La ga-
ranzia non copre danni dovuti all'assenza di
uno spazio di ventilazione adeguato.
La base dell'apparecchiatura può surriscal-
darsi. Si consiglia di prevedere un pannello
divisorio in materiale non infiammabile al di
sotto dell'apparecchiatura per rendere inac-
cessibile la base.
Collegamento elettrico
Avvertenza! Rischio di incendio e scossa
elettrica.
Tutti i collegamenti elettrici devono essere
eseguiti da un elettricista qualificato.
L'apparecchiatura deve disporre di una mes-
sa a terra.
Prima di qualsiasi intervento, è necessario
verificare che l'apparecchiatura sia disinserita
dalla rete elettrica.
Utilizzare il cavo di alimentazione appropriato.
Evitare che i collegamenti elettrici si aggrovi-
glino.
Assicurarsi che il cavo di alimentazione o la
spina (ove prevista) non sfiori l'apparecchia-
tura calda o pentole calde quando si collega
l'apparecchiatura alle prese vicine
Verificare che l'apparecchiatura sia installata
correttamente. Un collegamento elettrico o
una spia lenti (ove previsti) potrebbe far di-
ventare il terminale incandescente.
Assicurarsi che la protezione da scosse elet-
triche sia installata.
Scaricare la trazione sui cavi.
Accertarsi di non danneggiare la spina e il
cavo (ove previsti). Contattare il Centro di
Assistenza o un elettricista qualificato per so-
stituire un cavo danneggiato.
L'impianto elettrico deve essere dotato di un
dispositivo di isolamento che consenta di
scollegare l'apparecchiatura dalla presa di
corrente a tutti i poli. Il dispositivo di isola-
mento deve avere una larghezza dell'apertura
di contatto non inferiore ai 3 mm.
Servirsi unicamente di dispositivi di isola-
mento adeguati: interruttori automatici, fusibi-
li (quelli a tappo devono essere rimossi dal
portafusibile), sganciatori per correnti di gua-
sto a terra e relè.
Uso dell’apparecchiatura
Avvertenza! Rischio di lesioni, scottature
o scosse elettriche.
Utilizzare l’apparecchiatura in un ambiente
domestico.
Non apportare modifiche alle specifiche di
questa apparecchiatura.
Non utilizzare un timer esterno o un sistema
di controllo remoto distinto per mettere in
funzione l'apparecchiatura.
Non lasciare mai l'apparecchiatura incustodi-
ta durante il funzionamento.
Non accendere l'apparecchiatura con le mani
bagnate o se entra a contatto con dell'acqua.
Non appoggiare posate o coperchi sulle zo-
ne di cottura. Possono diventare roventi.
Spegnere la zona di cottura dopo ogni utiliz-
zo. Non fare affidamento sul rilevatore di pen-
tole.
Non utilizzare l'apparecchiatura come super-
ficie di lavoro o come piano di appoggio.
In caso di crepe sulla superficie, scollegare
l'alimentazione elettrica per evitare scosse
elettriche.
I portatori di pacemaker, devono mantenere
una distanza di almeno 30 cm dalle zone di
cottura a induzione quando l'apparecchiatura
è in funzione.
Avvertenza! Si può verificare
un'esplosione o un incendio.
19
www.zanussi.com
Grassi e olio caldi possono rilasciare vapori
infiammabili. Mantenere fiamme o oggetti cal-
di lontani da grassi e olio quando li si utilizza
per cucinare.
I vapori rilasciati da un olio molto caldo pos-
sono provocare una combustione spontanea.
Olio usato, che può contenere residui di ci-
bo, può liberare delle fiamme ad una tempe-
ratura inferiore rispetto ad un olio utilizzato
per la prima volta.
Non appoggiare o tenere liquidi o materiali
infiammabili, né oggetti facilmente incendia-
bili sull'apparecchiatura, al suo interno o nelle
immediate vicinanze.
Non tentare di spegnere l’incendio con l’ac-
qua. Scollegare l’apparecchiatura e coprire la
fiamma con un coperchio o una coperta di
protezione dal fuoco.
Avvertenza! Vi è il rischio di danneggiare
l'apparecchiatura.
Non poggiare pentole calde sul pannello dei
comandi.
Non esporre al calore pentole vuote.
Fare attenzione a non lasciar cadere oggetti
o pentole sull'apparecchiatura. La superficie
si potrebbe danneggiare.
Non mettere in funzione le zone di cottura in
assenza di pentole o con pentole vuote.
Non appoggiare la pellicola di alluminio diret-
tamente sull'apparecchiatura.
Lo spostamento di pentole in ghisa, in allumi-
nio o con fondi danneggiati può graffiare la
vetroceramica. Per spostare questi oggetti
sollevarli sempre dalla superficie di cottura.
Pulizia e manutenzione
Avvertenza! Vi è il rischio di danneggiare
l'apparecchiatura.
Pulire regolarmente l'apparecchiatura per evi-
tare il deterioramento del materiale della su-
perficie.
Non usare acqua spray né vapore per pulire
l'apparecchiatura.
Pulire l'apparecchiatura con un panno inumi-
dito e morbido. Utilizzare solo detergenti
neutri. Non usare prodotti abrasivi, spugnette
abrasive, solventi o oggetti metallici.
Smaltimento
Avvertenza! Rischio di lesioni o
soffocamento.
Contattare le autorità locali per ricevere infor-
mazioni su come smaltire correttamente l'ap-
parecchiatura.
Staccare la spina dall'alimentazione elettrica.
Tagliare il cavo di rete e smaltirlo.
Descrizione del prodotto
Panoramica
210
mm
180
mm
180
mm
145
mm
1 2
45
3
1
Zona di cottura a induzione
2
Zona di cottura a induzione
3
Zona di cottura a induzione
4
Pannello dei comandi
5
Zona di cottura a induzione
20
www.zanussi.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Zanussi ZEI6640FBA Manuale utente

Categoria
Piani cottura
Tipo
Manuale utente

in altre lingue