Netgear A6200 Manuale utente

Marca: Netgear

Modello: A6200

Categoria: Router

Tipo: Manuale utente

350 East Plumeria Drive

San Jose, CA 95134

USA

November 2012

202-11093-01

v1.0

802.11ac USB WiFi Adapter

(A6200)

User Manual

802.11ac USB WiFi Adapter (A6200)

Support

Thank you for choosing NETGEAR.

After installing your device, locate the serial number on the label of your product and use it to register your product

at https://my.netgear.com. You must register your product before you can

use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR

website. For product updates and web

support, visit http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the li

st of phone numbers at

http://support.netgear.com/general/cont

act/default.aspx.

NETGEAR recommends that you use only the official NETGEAR support resources.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

without notice. Other brand and product names are registered trademarks or trademarks of their respective

Revision History

Publication Part Number Version Publish Date Comments

202-11093-01 v1.0 November 2012 First publication

Contents

Chapter 1 Set Up Your Wireless USB Adapter

USB Adapter Placement and Performance . . . . . . . . . . . . . . . . . . . . . . . . .5

Attach the USB Adapter to Your Computer . . . . . . . . . . . . . . . . . . . . . . .5

Expand Your USB Adapter Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

NETGEAR genie Desktop Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

NETGEAR genie Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Status Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Join a Wireless Network with NETGEAR genie . . . . . . . . . . . . . . . . . . . . . .9

Network Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Join a Network or Connect to a Different Network . . . . . . . . . . . . . . . . .11

Join a Hidden Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Install a Standalone Driver without NETGEAR genie. . . . . . . . . . . . . . . . .15

Chapter 2 Maintenance

Other Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Sent/Receive Activity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Remove the genie Software. . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . .18

Frequently Asked Questions (FAQs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Appendix A Technical Specifications and

Factory Default Settings

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Factory Default Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Appendix B Notification of Compliance

1. Set Up Your Wireless USB Adapter

This chapter describes how to set up the 802.11ac USB WiFi Adapter (A6200) and includes the

following sections:

• USB Adapter Placement and Performance

• NETGEAR genie Desktop Icon

• NETGEAR genie Home

• Join a Wireless Network with NETGEAR genie

• Install a Standalone Driver without NETGEAR genie

For help installing your USB adapter, see the installation gu

ide that came in the package. The

installation is also available at the NETGEAR Download Center at downloadcenter.netgear.com.

Note: For more information about the topics covered in this manual, visit

the support website at support.netgear.com.

Note: Firmware updates with new features and bug fixes are made

available from time to time on

downloadcenter.netgear.com. Some

products can regularly check the site a

nd download new firmware,

or you can check for and download new firmware manually. If the

features or behavior of your product do not match what is described

in this guide, you might need to update your firmware.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

USB Adapter Placement and Performance

You can position the USB adapter to best suit your own environment and to ensure maximum

performance.

Attach the USB Adapter to Your Computer

 To attach the USB adapter directly:

Use the USB adapter without the desktop dock, and connect it directly into a USB port on

your comp

uter.

The USB connector on the USB adapter can swivel so the USB adapter can be positioned

lat against your computer.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

 To attach the USB adapter using the desktop dock:

1. Insert the USB adapter into the desktop dock.

2. Connect th

e USB cable of the desktop dock to your computer USB port.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

Expand Your USB Adapter Range

For added range and performance, you can flip the top portion of the USB adapter so that it is

perpendicular to the USB adapter:

In this position, the internal antennas are extended out from the USB adapter for increased

iFi performance.

NETGEAR genie Desktop Icon

When you install your USB adapter, the NETGEAR genie icon appears in the Windows

system tray and on the desktop. You can click this icon to open NETGEAR genie to make

changes or connect to a different wireless network. The color of the icon indicates the

strength of your wireless connection:

White. 3–5 bars (strong connection)

Yellow. 1–2 bars (weak connection)

Red. 0 (zero) bars (no connection)

If you remove your USB adapter, NETGEAR genie is not available, and the icon is not

isplayed. When you insert the USB adapter again, the icon returns.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

NETGEAR genie Home

When you launch NETGEAR genie, the Home screen displays.

This screen shows you at a glance if you are connected to a network,

and if you have Internet

access. The following options are available:

• Sele

ct Language. If more than one language is available, you can select a language

from this drop-down list. NETGEAR genie screens are displayed in the language that you

select.

• Home button. Th

e currently selected Home screen. You can click the Home button to

return here from a different screen.

• Jo

in a Network button. View a list of wireless networks and join a network.

• Other button.

View more information or check for software updates.

• Help.

Display the help.

Status Bar

The status bar is at the bottom of the screen:

Figure 1. Status bar

Network

Connection

Network

Wireless Signal

security

channel strength

name

status

Physical

rate

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

The following information is displayed:

• Netwo

rk name. The network name (SSID) of the wireless network to which the USB

adapter is connected.

• Connectio

n status. The connection status is one of the following (this status is also

shown in the diagram in the middle of this screen):

- Con

nected to the Internet

- Con

nected to the Router

- No Con

nection

• Netwo

rk security. The lock symbol shows whether the network you are connected to

uses wireless security. An open lock indicates an open network without wireless security,

such as one that you might use in a coffee shop.

• W

ireless channel. The wireless channel of the network to which the USB adapter is

connected.

• Physica

l rate. The physical transmission rate for wireless communication.

• Signal s

trength. The strength of the wireless signal. Three to five bars indicate a good

signal. One or two bars indicate a weak signal.

Join a Wireless Network with NETGEAR genie

In NETGEAR genie, click the Join a Network button to display the following screen:

The following information, link, and button are displayed:

• Netwo

rk list. View the wireless networks in the area. Click a network to select it.

• Ma

nually Connect to a network. Click this link to join a network without viewing it on the

network list, or to connect to a hidden network. A hidden network does not broadcast its

wireless network name (SSID).

• Refresh. Click this butt

on to scan for available networks in the area.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

Network Details

From the Join a Network screen, you can view more details about a specific network.

 To view network details:

1. In the n

etwork list, click a network to select it.

2. Click the Det

ails button to display a screen similar to the following one:

The following information is displayed:

• Network name

(SSID). The name assigned to a wireless network. As a security

measure, some wireless access points do not broadcast their SSIDs. In such cases, the

network is hidden. The name (SSID) field is blank even though the rest of the information

is displayed.

• Channe

l. The channel on which the wireless network operates. NETGEAR recommends

that you choose a network that uses a different channel from that of neighboring

networks.

• W

ireless Mode. The wireless technology used for the router or access point, such as N,

A, G, B, or AC.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

• WPS support. Identifies whether the router or access point for this network supports

WPS (Wi-Fi Protected Setup).

• MAC addres

s. The unique hardware address of the wireless device broadcasting this

information. Typically, the wireless device is a wireless router or access point.

Join a Network or Connect to a Different Network

If your wireless network supports WPS, you can use WPS to join a wireless network. Or you

can join a wireless network from this NETGEAR genie screen.

• WPS. Press and

hold the WPS button on the side of the USB adapter for 3 seconds.

Then within 2 minutes, press the WPS button on your wireless router or access point.

• NETGEAR geni

e. Click your wireless network to select it from the list, and click Connect.

If the network is secure, enter its password or network key.

After the USB adapter joins the network, it automatically saves the network connection

informatio

n to a Windows profile. Windows profiles can be used by genie and the Windows

utility. If there is no change in the network information, the next time you launch NETGEAR

genie, it automatically connects to the network you previously joined.

 To use WPS to join a wireless network:

1. Pre

ss and hold the WPS button on the side of the USB adapter for 2 seconds.

2. Then wit

hin 2 minutes, press the WPS button on your wireless router or access point.

The USB adapter joins the network, which can take a few minutes. Your settings are

saved in

a profile.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

 To select and join a wireless network:

1. From NETGEAR genie, click Join a Network.

2. Loo

k for the network you want to join in the list on this screen. If you do not see your

network, you might need to scroll down to view more networks.

If the network name is not displayed, that indicate

s a hidden network that does not

broadcast its SSID. Use the manual method to connect to a hidden network. See Join a

Hidden Network o

n page 13.

Select the network that you want to join.

3. Click the Conn

ect button.

4. If

the wireless network is secure, enter the network password.

The USB adapter joins the wireless network. This process could take a few minutes.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

Join a Hidden Network

A hidden network does not broadcast its SSID.

1. F

rom NETGEAR genie, click Join a Network.

2. Select th

e Manually Connect to a network (for hidden networks) link.

You can use WPS to connect, or enter the wireless information yourself.

 To manually connect using WPS:

1. Click the St

art button.

A pop-up window displays WPS instructions telling

you to press the WPS button both on

the USB adapter and the router.

2. Press the WPS b

utton on your USB adapter.

3. Go to

your wireless router or access point, and press its WPS button.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

 To manually connect without WPS:

1. Select the Enter wireless information myself radio button.

There are four security types that can be displayed for the network: None, WEP,

A-PSK, and WPA2-PSK.

• None.

There is no password.

• WEP. The p

assword (key) is a 10 or 26 hexadecimal digit.

• WP

A-PSK. The password (passphrase) is 8–63 characters in length.

• WP

A2-PSK. The password (passphrase) is 8–63 characters in length.

2. In

the fields provided, type the network name (SSID), select the security type, and type the

passphrase (password).

Note: NETGEAR genie does not let you select the WPA or WPA2 security

type. Windows 8, Windows 7, and Windows Vista, use the Windows

WLAN Autoconfig service to enter WPA or WPA2 credentials to join

the network. For Windows XP, use the Wireless Zero Configuration

service to enter WPA or WPA2 credentials to join the network.

Set Up Your Wireless USB Adapter

802.11ac USB WiFi Adapter (A6200)

Install a Standalone Driver without NETGEAR genie

For Windows 8, Windows 7, and Windows Vista, you can install the Windows driver without

the NETGEAR genie and use the Windows WLAN Autoconfig service to join a network. For

Windows XP, you can install the Windows driver without the NETGEAR genie and use the

Wireless Zero Configuration service to join a network.

 To install the standalone driver and join a network:

1. I

nsert the resource CD in your computer CD drive. If the CD main screen does not

display, browse the files on the CD and double-click autorun.exe. The Welcome screen

displays:

2. Click Inst

all Windows Standalone Driver.

The driver installs on your computer.

3. E

ither insert the USB adapter into a USB port on your computer, or connect it with the USB

cable that came in the package.

4. Use the

Windows WLAN Autoconfig service to join a network. (For Windows XP, use the

Wireless Zero Configuration service.)

2. Maintenance

This chapter includes the following sections:

• Other Screen

• Remove the genie Software

• Frequently Asked Questions (FAQs)

Maintenance

802.11ac USB WiFi Adapter (A6200)

Other Screen

In NETGEAR genie, click the Other button to display the following screen:

Sent/Receive Activity

• Sent Packets. Total number of packets sent during communication with the wireless

network.

• Receive

d Packets. Total number of packets received during communication with the

wireless network.

Network

• IPv4 Address. The IPv4 address assigned to this USB adapter. The IPv4 address can

change if you disconnect from the network and rejoin it later.

• IPv6 Address. The I

Pv6 address assigned to this USB adapter. The IPv6 address can

change if you disconnect from the network and rejoin it later.

• Security T

ype. Wireless security used for the USB adapter to connect to the current

wireless network.

Adapter

• Adapter MAC Address. The Media Access Control (MAC) address of this USB adapter.

The MAC address is a unique 48-bit hardware address assigned to each wireless device.

As a security measure, some wireless networks restrict access based on a list of known

MAC addresses. If you try to join such a network, you have to provide your USB adapter’s

MAC address (shown here) to the network administrator before you can connect.

Maintenance

802.11ac USB WiFi Adapter (A6200)

• Region. The region setting for the USB adapter. Wireless channels in use depend on the

country or region. Your USB adapter automatically scans approved channels for your

region when it checks to see which networks are available in your area. Governments

regulate the channels used for wireless transmission. Operating the USB adapter in a

different region might violate local laws.

Support

• Get Diagnostics Info. Click the Get Info button if support has directed you to do so. The

genie displays the System Information screen and starts collecting system information, IP

information, client driver and profile information, and site survey information.

• Sof

tware Update. You can check for software updates at the NETGEAR website. Click

the Check button, and the genie displays the Live Check screen and checks for available

software upgrades. If new software is found, the USB adapter software is automatically

updated.

Note: During the software update process, the old software version is

removed and all saved profiles are deleted before the new software

version is installed. When the software update process is complete,

the USB adapter no longer connects to the network automatically.

You need to join the network as described in

Join a Wireless

Network with NETGEAR genie on p

age 9. (If you do not use the

NETGEAR genie, see Install a Standalone Driver without NETGEAR

genie on page 15.)

Help

Click the Help button to display help.

Remove the genie Software

You can remove the USB adapter software in several different ways:

• Un

install. In Windows, select Start > All Programs > NETGEAR A6200 genie >

Uninstall NETGEAR A6200 Software.

• Co

ntrol Panel. Follow the appropriate instructions for your Windows operating system:

- W

indows 8. Move the pointer to the left bottom corner of the screen to display the

Windows pop-up Start menu. Right-click your mouse button, select 'Program and

Feature' to Uninstall, and select NETGEAR A6200 genie.

- W

indows 7. Select Start > Control Panel > Programs and Features, and then

select NETGEAR A6200 genie. Click Uninstall and follow the screen prompts.

Maintenance

802.11ac USB WiFi Adapter (A6200)

- Windows Vista. Select Start > Control Panel > Programs and Features, and then

select NETGEAR A6200 genie. Click Uninstall/Change from the top menu and

follow the screen prompts.

- W

indows XP. Select Start > Control Panel > Add or Remove Programs, and then

select NETGEAR A6200 genie.

Frequently Asked Questions (FAQs)

The USB adapter LED is not lit.

The USB adapter is not inserted securely in the USB port (or USB cable if used) or the A6200

sof

tware is not installed.

• Remove an

d reinsert the USB adapter.

• Check the

Windows device manager to see if the USB adapter is recognized and

enabled. Reinstall the A6200 software, if necessary.

• Insert the USB ad

apter in a different USB port on your computer if one is available.

I do not see the icon.

Check to make sure that your USB adapter is inserted in the USB port. If it is removed, then

he icon is not displayed. When you insert the USB adapter into the USB port, the icon

returns to your desktop and the Windows system tray.

I cannot connect to a wireless network.

• Make

sure that your USB adapter is inserted securely into the USB port on your computer

or the USB cable if you are using it. The USB adapter LED should light or blink (see

NETGEAR genie Desktop Icon on p

age 7 for details).

• Click th

e icon to open NETGEAR genie. The following screen displays if the USB

adapter cannot connect to the network that you selected:

Maintenance

802.11ac USB WiFi Adapter (A6200)

• If the network uses wireless security, you need to either know the wireless security

settings or use Push 'N' Connect if the network supports WPS. Some networks also

restrict use to only computers or wireless devices with known MAC addresses. If that is

the case, on the NETGEAR genie screen, click Other to find the MAC address for your

USB adapter and provide it to the network administrator.

When I connect to the network, I cannot access the Internet.

Click to open NETGEAR genie. The following screen displays if the USB adapter can

connect to the network that you selected but you cannot access the Internet:

Make sure that you are connected to the correct network. If you are, then check to see if the

route

r’s Internet connection is working. If the router’s Internet connection is not working,

restart the modem, router, and computer.

When I connect to the network, I cannot access shared resources such as printers.

• Make

sure that the router or access point is physically connected to the Ethernet network.

• Make

sure that the IP addresses and the Windows networking settings are configured

correctly.

Do the USB ports go into a sleep mode if there is no traffic?

The USB devices do go into sleep mode if a USB feature called Selective Suspend is

enab

led, which it is by default. If this feature is enabled, and the connected USB devices to

go into Selective Suspend mode, the network disconnects. To prevent this type of network

disconnection, you can disable Selective Suspend.

 To disable Selective Suspend mode:

1. Select S

tart > Control Panel > Hardware and Sound > Power Options > Edit Plan

Settings > Change Advanced Power Settings > USB Settings.

2. Change th

e setting for Selective Suspend mode to Disabled.

La pagina sta caricando ...

Netgear A6200 Manuale utente

Marca: Netgear

Modello: A6200

Categoria: Router

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Netgear A6200 User manual

Netgear A6200 Manuale utente

Netgear A6200 Manuale utente

in altre lingue

Documenti correlati