Netgear WN3000RP-100PAS Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

350 East Plumeria Drive
San Jose, CA 95134
USA
June 2011
202-10789-01
v1.0
Universal WiFi Range
Extender WN3000RP
User Manual
2
Universal WiFi Range Extender WN3000RP
©2011 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the Support website at
http://support.netgear.com .
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © 2011 NETGEAR, Inc. All rights reserved.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
3
Table of Contents
Chapter 1 Getting Started
Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Positioning Your Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connect a PC to the Extender with an Ethernet Cable . . . . . . . . . . . . . . . .8
Log In to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Use the Smart Wizard to Set Up the Extender. . . . . . . . . . . . . . . . . . . . . . .9
Chapter 2 Extender Network Settings
Connect the Extender to an Existing Network . . . . . . . . . . . . . . . . . . . . . .14
Use WPS to Add a PC to the Extender’s Wireless Network. . . . . . . . . . . .14
Extender Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Set Up WEP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Set Up WPA, WPA2, or WPA + WPA2. . . . . . . . . . . . . . . . . . . . . . . . . . 18
Extender IP Address Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Status Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Show Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Attached Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Back Up and Manage Extender Settings . . . . . . . . . . . . . . . . . . . . . . . . . .21
Back Up Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Restore Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Erase the Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Set the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Chapter 3 Troubleshooting
Smart Wizard FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Connecting to http://www.mywifiext.net . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Joining Wireless Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Appendix A Supplemental Information
Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Appendix B Compliance Notification
4
1
1. Getting Started
This chapter covers the following topics:
Hardware Features
How the Extender Works
Connect a PC to the Extender with an Ethernet Cable
Log In to the Extender
Use the Smart Wizard to Set Up the Extender
For more information about the topics covered in this manual, visit the Support website at
http://support.netgear.com.
Getting Started
5
Universal WiFi Range Extender WN3000RP
Hardware Features
WPS
Ethernet port
Factory Reset button
WPS button
Device On/Off button
PC to Extender
Status
Link Rate
Note: For best performance,
position antennas pointing up.
Figure 1. Extender
The LEDs on the front show how the Extender is working:
WPS. This LED indicates a WPS wireless connection.
- Solid green. There is wireless security (WPA or WPA2).
- Blinking green. A WPS connection is in progress.
PC to Extender. The LED is lit when the Extender is connected to a PC.
Status. This LED is lit when the Extender is powered on.
Link Rate. This LED indicates a wireless connection between the Extender and the
router.
- Green is best.
- Amber is good.
- Red is poor.
The side panel has the following features:
Ethernet port. You can use this for a wired connection to a computer or other device as
described in the User Manual.
Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it
until the Status LED flashes.
WPS button. Press the WPS button to wirelessly connect the Extender to your
router or wireless adapter.
Device On/Off button. Turns the device on and off.
Getting Started
6
Universal WiFi Range Extender WN3000RP
How the Extender Works
The Extender works like a bridge between a wireless router and a computer or wireless
device outside the wireless router’s range. To do this, the Extender has two main jobs:
1. The Extender connects to a wireless network that is up and running.
When the Extender connects wirelessly to a network, it acts as a network client. This is
similar to how a computer connects to a network.
2. The Extender acts a
s an access point for computers.
The Extender has its own wireless network called NETGEAR_EXT that wireless
computers can join. In its role as an access point, the Extender performs tasks that
wireless routers do, such as broadcasting its network name (SSID).
The Extender must do each of these jobs so that both ends of the bridge are in place.
Figure 2. Range Extender in a home
When to Use Your Extender
NETGEAR recommends that you connect to the Extender only when your home network
connection is poor. Because data traffic routed through the Extender is inherently slower than
traffic routed directly from the network, the computer should stay on the network if the
connection is good enough. NETGEAR recommends that you connect through the Extender
network only when the computer is in a “dead zone” where connection from the network is
very poor or non-existent.
Getting Started
7
Universal WiFi Range Extender WN3000RP
The Extender LEDs can help you tell if the extender is correctly set up and working as it
should.
The best performance is delivered when both the Link Rate LED and the PC to Extender
Connection LED
are green.
A workable performance is delivered when the Link Rate LED is amber
and the PC to
Extender Connection LED
is green.
Positioning Your Extender
The ideal location to place the Extender is half-way between your wireless router and your
computer.
DO DON’T
Figure 3. Range extender location
The best connection is established when there is a clear line of sight between the Extender
and the wireless router and also a clear line of sight between the Extender and the computer
you are using. If this straight path is blocked by a thick wall or other materials, move the
Extender to a different location half-way between the computer and the router.
If there is no power outlet nearby, or you prefer to place the Extender elsewhere, move the
Extender closer to the computer. If the Link Rate LED is green or amber and the PC to
Extender Connection LED is green, the Extender is working as expected.
To improve the Link Rate LED from red or amber to green:
Once you successfully connect to the Extender from a computer that is outside the range
of your router and log in to www.mywifiext.net, the Smart Wizard guides you through the
process to connect the Extender to a router.
If the Link Rate LED is red or the Smart Wizard cannot connect the Extender to a router,
move the Extender closer to the router or to a different spot where it provides a better line
of sight. As you move the Extender, continue to check the Link Rate and the PC to
Extender Connection LEDs on the front panel until you find a location where the Link
Rate LED is green or amber, and the PC to Extender Connection LED is green. Note that
you might have to unplug the Extender as you move it to a different location. If you do,
from the new location, power up the Extender and continue to check the LEDs.
Once the LEDs show that the Extender is in a good location, open a browser and go to
http://www.mywifiext.net to continue the setup process.
Getting Started
8
Universal WiFi Range Extender WN3000RP
Connect a PC to the Extender with an Ethernet Cable
Usually, you connect to the Extender wirelessly, but you can use its LAN port to connect a
wired device such as an Ethernet-enabled gaming console, printer, or PC.
Note: Before you connect wired devices or computers, first install and set
up your Extender as described in the Universal WiFi Extender
WN3000RP Installation Guide that came in the package.
1. Connect your computer to the Extender with an Ethernet cable.
2. Plug the Extender into an electrical outlet.
CAUTION:
Do not use Ethernet cable to connect the Extender to a router. If you do
so, the Extender does not work because it is designed to use only a
wireless connection to the router.
3. Log in as described in the following section.
If you have trouble connecting:
If you start your computer, connect the Ethernet cable to the Extender, and launch your
browser quickly, the computer might still need a couple of minutes to recognize the
Ethernet LAN connection before you can connect.
Make sure that your Ethernet cable is securely connected to the Extender and the
computer, and that the Extender LAN LED is on. If the LED is not lit reconnect the
Ethernet cable, and relaunch your Internet browser.
Log In to the Extender
You can log in to the Extender to use the Smart Wizard or to use the menu selections to view
or change the extender’s settings.
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
Getting Started
9
Universal WiFi Range Extender WN3000RP
2. In the address field of your browser, enter http://www.mywifiext.net. You are prompted to
enter a user name and password:
If you do not see the log in prompt, make sure to include http:// when you type
http://www.mywifiext.net in your browser.
3. Type admin for the user name. The default password is password. NETGEAR
recommends that you set a more secure password after you log in (see Set the Password
on page 23).
If your Extender has an Internet connection, the Firmware Upgrade screen displays
(see Upgrade the Firmware on page 23), and the software automatically checks for
new firmware at the NETGEAR website.
The Status screen displays with the menu on the left. This screen shows what the
current settings are for the Extender:
Menu Status screen
Use the Smart Wizard to Set Up the Extender
The Smart Wizard can help you set up your Extender to connect to a wireless network. For
information about more configuration options, see Chapter 2, Extender Network Settings.
The Universal WiFi Extender WN3000RP Installation Guide (included in the package)
explains how to install your Extender. During installation, when you launch your Internet
browser, the Smart Wizard automatically displays.
Getting Started
10
Universal WiFi Range Extender WN3000RP
After installation, to use the Smart Wizard again:
1. Log in to the Extender as described previously.
Note: Once you begin using the Smart Wizard, you must complete all of its
steps before you can exit.
2. From the menu, select Setup Wizard. The following screen displays:
This is the same Smart Wizard that displays during installation as described in the
installation guide.
3. Either select a network from the list, or select the Manually input my wireless SSID radio
button and type the SSID.
Getting Started
11
Universal WiFi Range Extender WN3000RP
4. Enter the passphrase for your wireless network and click Continue. The next screen
displays:
5. Make sure that the correct network name is shown, and then click Continue.
The Extender connects to your existing wireless network.
Getting Started
12
Universal WiFi Range Extender WN3000RP
The Extender’s wireless network name (SSID) changes to the name of your wireless
network name with _EXT added to the end. The following screen displays:
When this happens, your computer is automatically disconnected from the Extender
wireless network.
6. If you want to use the same password to access the Extender’s wireless network that you
use for wireless access to your existing network, click the copy password button.
7. With the software that you use to manage your wireless connections, join the Extender
wireless network. For instance, if you use Windows, you might use a screen like this:
8. Then go back to the Extender wizard screen and select the check box to confirm that you
have connected to the Extender network:
9. Click Continue.
13
2
2. Extender Network Settings
To change settings, connect the Extender to your computer and use your Internet browser to go
to http://www.mywifiext.net as described in
Connect a PC to the Extender with an Ethernet
Cable on page 8.
Connect the Extender to an Existing Network
Use WPS to Add a PC to the Extender’s Wireless Network
Extender Wireless Settings
Extender IP Address Setup
Status Screen
Attached Devices
Back Up and Manage Extender Settings
Set the Password
Upgrade the Firmware
Advanced Wireless Settings
Extender Network Settings
14
Universal WiFi Range Extender WN3000RP
Connect the Extender to an Existing Network
You can use this menu selection to wirelessly connect the Extender to your home network.
1. From the Extender menu at http://www.mywifiext.net, select Setup > Connect to an
Existing Network. The Extender scans for wireless networks, and displays a list.
If your wireless network is not on the list, and it is up and running, see Positioning Your
Extender on page 7 for suggestions.
2. Click the radio button to select your
network from the list and click Continue.
The next screen displays:
3. Enter your network’s passphrase or key
and click Continue.
The Extender joins your wireless
network.
Use WPS to Add a PC to the Extender’s Wireless Network
WPS (Wi-Fi Protected Setup) lets you connect a computer or wireless device to the
Extender’s network without entering the wireless network passphrase or key. Instead, you
use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2 wireless
security. If your Extender network is open (no wireless security is set), then connecting with
WPS automatically sets WPA2 + WPA wireless security on the Extender network.
The Universal WiFi Extender WN3000RP Installation Guide explains how to use WPS during
installation.
You can connect with WPS by using either the WPS button on the side of the Extender, or by
logging in to the Extender and clicking an onscreen WPS button.
Extender Network Settings
15
Universal WiFi Range Extender WN3000RP
To use the Extender WPS button to connect:
1. Locate the WPS button on the side of the Extender.
WPS button
2. Press the Extender’s WPS button.
For 2 minutes, the Extender attempts to add a wireless client (a computer or other
wireless device) to its wireless network.
3. Within 2 minutes, press the WPS button on your wireless device, or follow the WPS
instructions that came with your wireless device.
Your wireless device is now connected to the Extender.
To log in to the Extender and use WPS to connect:
1. From the Extender menu at http://www.mywifiext.net, select Setup > Add WPS Client.
The following screen displays:
2. Select a radio button.
Push Button (recommended). Either click the
button or press the WPS
button on the front of the Extender.
PIN Number. Select the PIN number radio button and enter the client PIN in the field
that displays.
Extender Network Settings
16
Universal WiFi Range Extender WN3000RP
The Extender tries to find the wireless client (the computer) that is attempting to join the
network. If you are using a WPS button, it tries for 2 minutes. If you are using a PIN, it
tries for 4 minutes.
3. Go to your wireless computer. Use its WPS software to try to connect to the Extender.
The first time you add a WPS client, WPS automatically sets the Extender’s wireless
security to WPA2 + WPA with a random passphrase. You can view these settings in the
Wireless Settings screen, described in the following section.
Extender Wireless Settings
You can use the Wireless Settings screen to change the network name (SSID) for the
Extender’s network and to set up wireless security. If you do not change these settings, the
network name is NETGEAR_EXT, and the network is open (no wireless security is set up).
Note: If you use a wireless computer to change the extender’s wireless
settings, you will be disconnected when you click Apply. To
reconnect, you must select the new network name that you created,
and enter the passphrase or wireless security key that you set up.
To change the wireless settings for the extender’s network:
1. From the Extender menu at http://www.mywifiext.net, select Setup > Wireless Settings
to display the following screen:
2. In the Name (SSID) field, you can type in a new name to customize your extender network.
3. In the Security Options section of the screen, select the type of wireless security that you
want to use on your network.
Extender Network Settings
17
Universal WiFi Range Extender WN3000RP
None. This is an open wireless network. Any wireless computer or device is allowed
to join this network.
WEP. WEP is an older standard, and is less secure than WPA or WPA2. WEP uses
encryption keys and data encryption for data security. You can select 64-bit or 128-bit
encryption.
WPA-PSK [TKIP]. WPA is more secure than WEP. When using wireless computers or
devices that support WPA, you can enter a passphrase to join the extender’s wireless
network.
WPA2-PSK [AES]. WPA2 is even more secure, but some older computers do not
support this standard. When using wireless computers or devices that support WPA2,
you can enter the passphrase to join the extender’s wireless network.
WPA-PSK [TKIP] + WPA2-PASK [AES]. When using wireless computers or devices
that support either WPA or WPA2, you can enter the passphrase to join the extender’s
wireless network.
4. Click Apply to save your settings.
5. Use your wireless computer to connect to the Extender’s network with its new settings. The
Smart Wizard can guide you through this process.
Set Up WEP
1. In the Wireless Settings screen, in the Security Options section, select the WEP radio
button.
2. Select the authentication type: Automatic, Open System, or Shared Key. The default is
Open System.
Note: The authentication is separate from the data encryption. You can
select authentication that requires a shared key, but still leaves data
transmissions unencrypted. Security is stronger if you use both the
Shared Key and WEP encryption settings.
3. Select the encryption strength setting:
WEP 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
WEP 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9, a–f,
or A–F).
4. Enter the encryption keys. You can manually or automatically program the four data
encryption keys. These values must be identical on all computers and access points in your
network:
Passphrase. To use a passphrase to generate the keys, enter a passphrase, and
click Generate. This automatically creates the keys. Wireless computers must use
the passphrase or keys to access the Extender.
Extender Network Settings
18
Universal WiFi Range Extender WN3000RP
Note: Not all wireless computers support passphrase key generation. If
your computer does not support the passphrase, then you will need
to type the encryption key in order to join the wireless network.
Key 1Key 4. These values are not case-sensitive. You can manually enter the four
data encryption keys. These values must be identical on all computers and access
points in your network. Enter 10 hexadecimal digits (any combination of 0
9, af, or
A
F).
5. Select which of the four keys will be the default.
Data transmissions are always encrypted using the default key. The other keys can be
used only to decrypt received data. The four entries are disabled if WPA-PSK or WPA
authentication is selected.
6. Click Apply to save your settings.
Set Up WPA, WPA2, or WPA + WPA2
Both WPA and WPA2 provide strong data security. WPA with TKIP can be used on Windows
systems with Service Pack 2 or later. WPA2 with AES is a hardware implementation; see
your device documentation before implementing it.
To set up WPA or WPA2 in the Extender:
1. On the Wireless Setting screen, select the radio button for the WPA or WPA2 option of
your choice.
2. The settings displayed on the screen depend on which security option you select.
3. For WPA-PSK or WPA2-PSK, enter the passphrase.
4. Click Apply to save your settings.
Extender IP Address Setup
From the Extender menu at http://www.mywifiext.net, under the Maintenance heading, select
IP Address.
The IP Address screen shows whether the Extender is set to get its IP address dynamically
from the router (this is the most common setting), or is set as a static IP address.
Get Dynamically From Router. The wireless network router assigns an IP address when
the Extender connects to its wireless network. Most networks are set up so that the router
automatically does this.
Use Static IP Address. Specify a static IP address. This is not usually necessary. If you
set this up, you should be technically experienced or have a technically experienced
person help you.
Extender Network Settings
19
Universal WiFi Range Extender WN3000RP
- IP Address. The static IP address.
- IP Subnet Mask. The subnet mask associated with the IP address.
- Gateway IP Address. The IP address for the gateway.
- Primary DNS. The primary domain name server (DNS).
- Secondary DNS. The secondary domain name server (DNS).
Status Screen
When you connect to http://www.mywifiext.net, after the automatic firmware check, the Status
screen displays. You can also select Status from the menu to display this screen:
This screen shows the current settings and the status of your Extender.
You can click Show Statistics to see device performance statistics such as the number of
packets sent and number of packets received for each port. See Show Statistics on page 20.
Hardware and Firmware Version. The model of the hardware and the currently running
firmware version.
GUI Language Version. The currently selected language.
Connection Status to Existing Network
Name (SSID). Your Extender is set up to connect to this SSID, also called the wireless
name.
Connection Status. The status of your wireless connection (connected or disconnected).
Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current wireless
connection.
Extender Network Settings
20
Universal WiFi Range Extender WN3000RP
Extender IP Info
MAC Address. The physical address of the Extender, as seen from the local area
network (LAN).
IP Address. The IP address of the Extender. The default is 192.168.1.250.
DHCP Client. Identifies the network DHCP client on the wireless network.
IP Subnet Mask. The IP subnet mask associated with the LAN IP address of the
Extender. The default is 255.255.255.0.
Gateway IP Address. he IP address of the wireless network gateway.
Domain Name Server. The IP address of the Domain Name Server (DNS) of the
wireless network.
Extender Wireless Settings
Name (SSID). the name (SSID) of the wireless network.
Region. The country where the Extender is set up for use.
Channel. The current channel, which determines the operating frequency.
Wireless AP. Indicates if the access point (AP) feature is enabled.
Broadcast Name. Indicates if the Extender is configured to broadcast its SSID.
Wi-Fi Protected Setup. This indicates whether Wi-Fi Protected Setup is configured.
Show Statistics
On the Device Status screen, click Show Statistics to display the following screen:
Table 1. Show Statistics Fields
Field Description
LAN or WLAN (Port) The statistics for the LAN (local), and wireless LAN (WLAN) ports. For each
port, the screen displays the following:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Netgear WN3000RP-100PAS Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue