Topcom Allure 270 Manuale utente

ALLURE 270

USER GUIDE

MANUEL D’UTILISATEUR

HANDLEIDING

BRUKSANVISNING

BRUGERVEJLEDNING

ANVÄNDARHANDBOK

KÄYTTÖOHJE

MANUALE D’USO

ȅįȘȖȚİı ȋȡȘıȘı

HASZNÁLATI ÚTMUTATÓ

V 1.1

GB The features described in this manual are published with reservation to

modifications.

F Les possibilités décrites dans ce manuel sont publiées sous réserve de

modifications.

NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd

onder voorbehoud van wijzigingen.

S Funktionerna i denna bruksanvisning publiceras med reservation för

ändringar.

DK Vi forbeholder os retten til ændringer af de specifikationer, der er beskrevet

i denne brugsanvisning.

N Funksjoner beskrevet i denne manualen kan endres uten nærmere

informasjon.

SF Tässä ohjekirjassa julkaissut tiedot voivat muuttua ilman ennakkoilmoitusta.

I Le caratteristiche descritte nel presente manuale vengono pubblicate con

riserva di modifica.

GR ȅȚ ȜİȚĲȠȣȡȖȓİȢ ʌȠȣ ʌİȡȚȖȡȐĳȠȞĲĮȚ ıĲȠ ʌĮȡȩȞ İȖȤİȚȡȓįȚȠ, įȘµȠıȚİȪȠȞĲĮȚ µİ

İʌȚĳȪȜĮȟȘ ĲȣȤȩȞ ĲȡȠʌȠʌȠȚȒıİȦȞ.

HU A jelen használati útmutatóban leírt adatokra a gyártó fenntartja a változtatás

jogát.

This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.

The Declaration of conformity can be found on :

http://www.topcom.net/support/cedeclarations.php

Topcom Allure 270 3

Topcom Allure 270

ENGLISH

1 Before Initial use 4

1.1 Intended Purpose 4

1.2 Caller ID 4

1.3 Connection 4

2 Cleaning 4

3 Disposal of the device (environment) 4

4 Safety advice 5

5 Buttons/LED 6

6 Display 6

7 Installation 7

7.1 Battery installation 7

7.2 Installing power supply and line cord 7

8 Getting started 7

8.1 Initialisation 7

8.2 Settings 8

8.3 Making a phone call 9

8.4 Last number redial 10

8.5 Music on hold 10

8.6 Ringer volume 10

8.7 Flash Key 10

9 Caller ID 10

9.1 General information 10

9.2 Call list 10

9.3 Talking Caller ID 11

9.4 Scrolling through the Call List 11

9.5 Calling a number from the Call List 11

9.6 Erasing numbers from the Call List 11

9.7 VIP list 11

9.8 Voice mail 12

10 Phone Book 12

10.1 Use of the alphanumerical keypad 12

10.2 Adding a number to the Phone Book 13

10.3 Selecting and calling a number from the Phone Book 13

10.4 Changing a number and name from the Phone Book 13

10.5 Erasing a number and name from the Phone Book 13

11 Memory numbers 13

11.1 Adding a number to a Direct Memory 14

11.2 Calling a Direct Memory number 14

12 Sleep mode 14

13 Answering machine 14

13.1 Recording an outgoing messages (OGM) 14

13.2 Turning Answering Machine ON/OFF 15

13.3 Day and Time stamp 15

13.4 Number of rings 15

13.5 Messages 15

13.6 Playback of Incoming Messages 16

13.7 Recording a conversation 16

13.8 Memory Full 16

13.9 Remote Operation 16

14 Technical Data 17

15 Topcom warranty 18

15.1 Warranty period 18

15.2 Warranty handling 18

15.3 Warranty exclusions 18

4 Topcom Allure 270

Topcom Allure 270

1 Before Initial use

Thank you for purchasing this new desktop caller ID telephone.

1.1 Intended Purpose

This product is intend to be connected indoor to an analogue PSTN telephone line.

1.2 Caller ID

Caller ID is a network provider service. After subscribing to Caller ID, this phone will display

the caller’s phone number.

1.3 Connection

This device has been designed and manufactured to comply with the 98/482/EC rule,

referent to the Pan European connection of a terminal to the Public Switching Telephone

Network (PSTN) and following the established guidelines by the 1999/5/EC Directive about

radio electric equipments and the reciprocal acknowledge of their conformity. However, due

to the fact that there are some differences in the PSTNs from one country to another, the

verifying measurements by themselves do not set up an unconditional guarantee for an

optimal working in every connection point to the PSTN of any country .If any problem comes

up, get in touch firstly with the distributor.

In any case, use conditions for which the product has been created should be respected as

well as avoid its use in public or private networks with technical requirements clearly different

to those established in the EU.

2 Cleaning

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning

agents or abrasive solvents.

3 Disposal of the device (environment)

At the end of the product lifecycle, you should not throw this product into the

normal household garbage but bring the product to a collection point for the

recycling of electrical and electronic equipments. The symbol on the product,

user guide and/or box indicate this.

Some of the product materials can be re-used if you bring them to a recycling point. By re-

using some parts or raw materials from used products you make an important contribution to

the protection of the environment.Please contact your local authorities in case you need

more information on the collection points in your area.

To use ‘Caller ID’ (display caller), this service has to be activated on your

phone line. Normally you need a separate subscription from your

telephone company to activate this function. If you don’t have the Caller ID

function on your phone line, the incoming telephone numbers will NOT be

shown on the display of your telephone.

Topcom Allure 270 5

Topcom Allure 270

ENGLISH

4 Safety advice

• Do not operate the equipment if the telephone cable or the equipment itself is damaged.

• If the equipment is dropped, it must be checked by an electrician before further use.

• Dangerous voltages are present inside the equipment. Never open the housing or insert

objects through the ventilation holes.

• Do not allow liquids to get into the equipment. In case of emergency, pull out the plug

from the socket.

• Similarly, if a fault develops during use or before you start to clean the equipment, pull

the plug out of the socket.

• Do not touch plug contacts with sharp or metal objects.

• Do not carry out any modifications or repairs to the equipment yourself. Have repairs

done to the equipment or the mains cable only by a specialist service centre.

Unsatisfactory repairs can lead to considerable danger for the user.

• Children frequently underestimate the dangers associated with electrical equipment.

Therefore you must never leave children unsupervised in the vicinity of electrical

equipment.

• The equipment is not to be used in a damp room (e.g. bathrooms) or rooms where there

is a lot of dust.

• Equipment connected to the telephone line during a thunderstorm can be damaged by

lightning. Therefore you should pull the plug out of the main socket during a storm.

• To completely disconnect the equipment from the electricity supply, the plug must be

removed from the socket. When doing this, always pull on the plug itself and never on

the cable.

The following safety advice must always be followed before using

electrical equipment.

Please read carefully through the following information concerning

safety and proper use. Make yourself familiar with all the functions of the

equipment. Be careful to keep these advice notes and if necessary pass

them on to a third party.

6 Topcom Allure 270

Topcom Allure 270

5 Buttons/LED

6 Display

Display information Description

You received new messages in the telephone network mailbox

XX NEW You have received ‘XX’ new messages in your call list

REP You have received the call more than once

VIP You have selected the number as VIP

The battery is almost empty and needs to be replaced

The handsfree function is activated

The alarm is enabled

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19 20

+

-

Ø

1. New message / Play indicator

2. Answer On / Record indicator

3. Program button

4. Up button

5. Down button

6. Call back button

7. Music on Hold button

8. Flash R

9. Redial / Pause button

10. Handsfree button

11. Alphanumerical keyboard

12. Direct Memory buttons (M1-M3)

13. Volume Down / VIP button /VIP

14. Volume Up / Delete button /

15. Phone Book button

16. Outgoing message 1 button

17. Outgoing message 2 button

18. Conversation recording button

19. Play button

20. Answer ON/OFF button

Topcom Allure 270 7

Topcom Allure 270

ENGLISH

7 Installation

7.1 Battery installation

Batteries must be installed to prevent that

messages are lost during power failure.

• Open the battery compartment at the

bottom of the unit using a screwdriver.

• Insert 3 AAA Alcaline batteries (1,5V),

following the polarity as shown.

• Close the battery compartment.

Note: When the battery indicator is shown,

the batteries must be replaced. When the

batteries are removed, you have 5 minutes

to replace them. After that time, the memory

will be lost.

7.2 Installing power supply and line cord

For installation, do the following:

• Put the telephone on a flat surface.

• Plug one end of the supplied adapter into the electric socket and the other end into the

connector on the backside of telephone (21).

• Plug one end of the adaptor into the telephone wall outlet and the other end into the

adapter jack on the backside of the telephone (22).

8 Getting started

8.1 Initialisation

8.1.1 Display language

After installing the batteries, the default display language is shown.

Use or to select the desired display language.

Press to go to the next setting ‘Memory capacity’.

Never change batteries when the telephone line is connected !

Dispose of batteries at a designated battery disposal unit and not in the

household waste. Do not short-circuit & dispose of in fire. Remove the

batteries if this device is not going to be used for a long period.

+

-+-

3 X AAA Alkaline

21

22

23

24

Only use the charger plug supplied. Do not use other chargers, as this

may damage the batteries cells.

8 Topcom Allure 270

Topcom Allure 270

8.1.2 Memory capacity

The maximum capacity of the Allure 270 is 84 entries including names and numbers.

This number can be dedicated to the Phonebook and/or the Caller ID list. In this setting you

have to select the capacity of the Phonebook.

Use or to select the phonebook memory ‘MAX DATABANK = XXX (default 032)’.

Press to confirm the phonebook memory.

The Caller ID list memory size will be displayed briefly and the unit will go to standby mode.

To have acces to the memory setting, you have to remove the batteries for more than 10

minutes.

All stored information will be erased after initialisation.

8.2 Settings

8.2.1 Setting the language of the display text.

When you did not change the language during initialisation, you can select it as follows:

• Press for 3 seconds.

• Use or to select the desired display language.

• Press to go to the next setting.

• If no button is pressed within 10 seconds, the unit will return to standby mode.

8.2.2 Setting the display contrast.

You can select the desired contrast as follows:

• Press button for 3 seconds, the display language is shown.

• Press button again.

• Use or button to select the desired display contrast.

• Press to go to the next setting.

If no button is pressed within 10 seconds, the unit will return to standby mode.

8.2.3 Setting the Date and Time

When you have a subscription to the Caller ID service and your telephone provider sends the

date and time together with the telephone number, the phone’s clock will be set

automatically. The year must be set manually.

It is also possible to set the clock manually:

• Press for 3 seconds, the display language is shown.

• Press 2 times. The year will blink.

• Use or to select the year.

• Press to confirm the year and change to month.

• Repeat the previous steps for changing and confirming month, day, hour and minutes.

• After confirming the minutes, you will go to the next setting.

If no button is pressed within 10 seconds, the unit will return to standby mode.

This Allure 270 has multi-function keys, which perfom different function

depending on the status of the telephone. Please follow the user-guide

carefully to avoid any perceived mal-function.

Topcom Allure 270 9

Topcom Allure 270

ENGLISH

8.2.4 Setting the Local Prefix (5 digits)

The Local prefix must be set, when you are not allowed to dial out your own area code.

If there is an incoming call, starting with the programmed prefix, the code will not be displayed

and not be stored in the call list.

ex. When 012 is programmed and 0123456789 is the incomming call number, 3456789 is

displayed and stored in the call list.

• Press for 3 seconds, the display language is shown.

• Press repeatedly until ‘SET LOCAL CODE ‘ is display.

• Use or to select the first digit of the local code (0-9 or ‘-’ to unselect).

• Press confirm the first digit and change next digit.

• Repeat the previous steps for a the 5 digits.

When no local prefix must be set select (- - - - -).

• After confirming the last digit, you will go to the next setting.

If no button is pressed within 10 seconds, the unit will return to standby mode.

8.2.5 Setting the Prefix

If you need to dial out a one digit prefix before a telephone number from the call list or

phonebook, you have to set the Dial Prefix.

• Press for 3 seconds, the display language is shown.

• Press until ‘PREFIX‘ is display.

• Use or to select the prefix (0-9 or ‘-’ to unselect).

• Press button confirm the prefix.

If no button is pressed within 10 seconds, the unit will return to standby mode.

To dial out the prefix before the selected number out of the call list of phonebook,

press twice.

8.3 Making a phone call

There are 2 ways to make a phone call :

1. Enter the telephone number. If needed, you can erase the last digits by pressing .

Pick up the handset or press . The phone number will be dialled automatically.

2. Pick up the receiver or press the Handsfree button . Enter the telephone number.

Note: The call duration timer is shown on the 1e line of the display [mm:ss].

10 Topcom Allure 270

Topcom Allure 270

8.4 Last number redial

The Allure 270 saves the 3 last dialled telephone numbers in the memory with indication of

the call duration.

Press to scroll through the redial memory. When the desired number appears on the

display, there are two ways to call back :

1. Press . The desired number will be dialled automatically in handsfree.

2. Pick up the receiver. The number will be dialled automatically.

Note: The Redial button can also be used as a Pause button while entering a

telephone number !The letter ‘P’ appears on the display on the location where you

have added a pause of 3 sec.

8.5 Music on hold

It is possible to put the caller on Hold during a conversation by pressing . You can now talk

freely without the caller hearing you. The caller will hear a digital melody. The melody can be

changed by pressing or .

Press the Music on Hold button again if you want to resume your conversation.

8.6 Ringer volume

When you receive a phone call, the unit will ring. The ring volume can be adjusted by means

of the Ring Volume switch at the back of the phone (Hi- , Lo- ). (24)

8.7 Flash Key

Press the Flash button (R) to use certain services as ‘Call Waiting’ (if this service is provided

by your telephone company); or to transfer phone calls when you are using a telephone

exchange (PABX).

The flashtime can be selected by the switch on the back of the phone (100/300/600ms).

Before changing the flashtime switch, the power supply, batteries and line cord must be

removed. (23)

9 Caller ID

9.1 General information

When you have a subscription to the Caller ID service, the caller’s phone number and name

(when supported by the network) will appear on the display. If you saved the telephone

number with the name in the Phone Book, the programmed name will be shown on the

display (name tagging function).

9.2 Call list

The size of the call list has been set when initializing the telephone. The phone numbers you

have received more than once, will not be stored, but the repeat indicator REP will be

displayed. Every incoming number is saved in the Call List with indication of date and time.

In standby mode the number of new received calls is shown on the display. The new

message LED will blink until you have checked all New messages.

Topcom Allure 270 11

Topcom Allure 270

ENGLISH

9.3 Talking Caller ID

When the Talking Caller ID is activated, the incomming telephone number will be announced

through the speaker. Also when you scroll through the call list or phonebook, the number is

announced.

To set activate/deactivate the Talking Caller ID:

• Press for 3 seconds, the display language is shown.

• Press until ‘VOICE OFF’ or ‘VOICE ON’ is displayed.

•Select ‘VOICE ON’ and times the number has be announced (1-3) by pressing or .

•Select ‘VOICE OFF’ to disable the Talking Caller ID.

• Press confirm the prefix.

9.4 Scrolling through the Call List

You can scroll through the Call list by pressing or .

If no button is pressed within 10 seconds, you will return to standby mode.

9.5 Calling a number from the Call List

• Select the desired telephone number.

• Press . The number will be dialled automatically in handsfree mode.

If you want to dial the prefix (See 8.2.5 ”Setting the Prefix”), press twice.

• Pick up the handset if you want to communicate over the handset.

9.6 Erasing numbers from the Call List

9.6.1 Erasing one number

• Select the number you wish to erase.

• If the Talking Caller ID is activated, wait until the announcement is finished.

• Press briefly. “ERASED” appears on the display.

• Press or , the next number in the call list is displayed.

9.6.2 Erasing the entire Call List

• Enter the Call List and select a number not indicated with VIP (See 9.7 ”VIP list”)

• If the Talking Caller ID is active, wait until the announcement is finished.

• Press for 2 seconds , “ALL ERASED“ appears on the display.

If no button is pressed within 10 seconds, the unit will return to standby mode.

When erasing the entire call list, VIP numbers will remain saved (See 9.7 ”VIP list”).

9.7 VIP list

Numbers can be protected to be removed out of the call list when selecting ‘ERASE ALL’.

Therefore the number must be assigned as VIP.

All VIP numbers are visible in the Call list, but can also be checked in a separate VIP list.

12 Topcom Allure 270

Topcom Allure 270

9.7.1 Assigning a number to the VIP list.

• Scroll through the Call list by pressing or .

• If the Talking Caller ID is active, wait until the announcement is finished.

• Press the VIP button. The VIP icon will be displayed.

9.7.2 Selecting and calling a number from the VIP List

• Press VIP repeatedly to scroll through the VIP list.

• If the Talking Caller ID is active, wait until the announcement is finished.

• Press . The number will be dialled automatically in handsfree mode.

• Pick up the handset if you want to communicate over the handset.

9.7.3 Erasing individual numbers from the VIP List

• Select the VIP number you wish to erase out of the Call list.

• If the Talking Caller ID is active, wait until the announcement is finished.

• Press the VIP button. The VIP icon disappears.

• Press briefly. “ERASED” appears on the display.

• The next number in the call list is displayed.

9.8 Voice mail

When you have received a voice mail message in your Personal Voice Mail Box, the Voice

Mail symbol appears on the display. As soon as you have listened to the messages in the

mailbox, the symbol disappears.

* Voice mail is a network feature. Check with your network operator if this is available

on your line.

10 Phone Book

The size of the phonebook has been set when initializing the telephone. Default, 32

telephone numbers with name can be stored (See 8.1 ”Initialisation”).

10.1 Use of the alphanumerical keypad

Use the alphanumerical keypad to enter text. To select a letter, press the corresponding

button. For ex. if you press numerical button ‘5’, the first character (J) will be shown on the

display. Press multiple times if you want to select another character under this button.

Press button ‘2’ twice to select the letter ‘B’. If you want to select ‘A’ as well as ‘B’, press

button ‘2’ once to select ‘A’, wait for 2 seconds until the cursor has moved to the next location

and press then button ‘2’ twice to select ‘B’. To add a space, press 1. Wrong entered

characters can be erased by pressing the Erase button .

Topcom Allure 270 13

Topcom Allure 270

ENGLISH

10.2 Adding a number to the Phone Book

• Press .

•Press .

• Enter the name by means of the alphanumerical keypad and to confirm.

• Enter the telephone number and press to confirm.

• Follow the previous steps for adding another number or twice to leave the setting.

10.3 Selecting and calling a number from the Phone Book

•Press .

• Enter the first letter of the desired name by means of the alphanumerical keypad.

Numbers will be sorted on the first letter only.

• Search for the name in the Phone Book by pressing or .

• If the Talking Caller ID is active, the number is announcement through the speaker.

• When the desired name is shown on the display, pick up the handset or press . The

number will be dialled automatically.

10.4 Changing a number and name from the Phone Book

• Select the desired number from the Phone Book by name as mentioned in 10.3.

• If the Talking Caller ID is active, the number is announcement through the speaker.

• Press .

• Edit the name when necessary.

• Press .

• Edit the number when necessary.

•Press .

• Press twice to leave the phonebook.

10.5 Erasing a number and name from the Phone Book

• Select the desired number from the Phone Book by name as mentioned in 10.3.

• If the Talking Caller ID is active, the number is announcement through the speaker.

• Press for 2 seconds , “ERASED“ appears on the display.

• Press to leave the menu.

11 Memory numbers

You can program 3 Direct numbers (max 16 digits). These memory numbers can be dialled

by pressing M1-M3.

14 Topcom Allure 270

Topcom Allure 270

11.1 Adding a number to a Direct Memory

• Press M1 for 2 seconds.

• Enter the telephonenumber.

• Press the desired Direct Memory key (M1-M3)

11.2 Calling a Direct Memory number

• Press the desired Direct Memory key, the stored number is displayed.

• Press handsfree or pick up the handset.

12 Sleep mode

To avoid that you are disturbed during a specific period, you can activate the sleep mode.

The telephone will not ring during sleep mode, except for calls dedicated as VIP in the call

list. VIP calls will always ring.

Once the sleep mode time is past, the telephone will always ring.

• Press for 2 seconds

• Press repeatedly to select the sleep time (0-24 hours in steps of 1 hour)

• Press to confirm, the sleeptime is displayed

13 Answering machine

13.1 Recording an outgoing messages (OGM)

13.1.1 OGM1

OGM1 is the Outgoing Message that each caller will hear when your answering device

answers the call.

To record the Outgoing Message 1:

• Press and hold .

• After you hear a beep, release and start saying your outgoing message (max 30

seconds).

• Press again to end recording.

• The device will playback the recorded message after a beep.

To check your OGM1 again, press briefly.

When no outgoing message is recorded, a pre-programmed OGM will be used.

Direct memories can only be overwritten, not erased.

To disable the sleep mode, press .

Topcom Allure 270 15

Topcom Allure 270

ENGLISH

13.1.2 OGM2

OGM2 is the message that the caller will hear that is calling from the telephone number which

is set in the menu ‘OGM2 CID NO’.

When the Allure 270 receives the preprogrammed Caller ID number, this message will be

playbacked instead of OGM1. With this function you can record dedicated messages for one

person.

a. To record OGM2

• Press and hold .

• After you hear a beep, release and start saying you outgoing message.

• Press again to end recording.

• The device will playback the recorded message after a beep.

To check your OGM2 again, press briefly.

b. To set the OGM2 caller ID number

• Press for 3 seconds, the display language is shown.

• Press repeatedly until ‘OGM2 CID NO‘ is displayed.

• Enter the telephone number by means of the numerical keypad.

• Press confirm.

13.2 Turning Answering Machine ON/OFF

• Press to switch the answering machine ON or OFF. The setting is displayed.

13.3 Day and Time stamp

Every time a message is recorded, the date and time will also be stored.

When playing back a message, the date and time of the recording will be announced before

the message. The language of the Voice Prompt is indicated on the giftbox. The display

language of the device functions is the same as the voice prompt.

13.4 Number of rings

To set the number of rings before the telephone answers a call:

• Press and hold the on/off button until ‘AUTO RINGER X’ is displayed.

• Press or to select the number of rings (1-6).

If you set the number of rings to 1, the talking caller ID will not work because the time for

pronouncing the number is too short.

13.5 Messages

After answering the call, the caller will hear your outgoing message (OGM).

He can record a message (max 30 seconds) after the beep. As soon as you have new

messages the number of new messages will be displayed.

The recording will be interrupted when it detect silence for 7 seconds or when you pick up a

the telephone.

16 Topcom Allure 270

Topcom Allure 270

13.6 Playback of Incoming Messages

• Press to play all new messages. For each message, the internal voice announces the

day and time the message was recorded.

• During playback, you can go to next message by pressing or to the previous message

by pressing .

• To stop playback press .

• To delete the actual message press and hold button during playback of the message.

• To increase the volume during playback, press briefly.

• To decrease the volume, press briefly.

• After you have listened to the new messages, press the and hold to listen to all stored

messages.

13.7 Recording a conversation

A conversation of maximum 3 minutes can be recorded.

To start recording, press for 3 seconds. A beep will confirm that the recording started.

To end recording, press again.

To playback, press briefly in standby.

13.8 Memory Full

The display indicates when the memory is full.

When there is a new incomming call when the memory is full, the oldest message will be

deleted.

13.9 Remote Operation

The answering machine can be operated remotely using a touch-tone phone (DTMF tone

selection system).

13.9.1 Setting the security code

The 4 digit remote code is necessary for remote operation (default: 0123).

To set the code:

• Press for 3 seconds, the display language is shown.

• Press repeatedly until ‘SET REMOTE CODE‘ is displayed.

• Enter the new code by means of the numerical keypad.

• Press confirm.

If no button is pressed within 10 seconds, the unit will return to standby mode.

Topcom Allure 270 17

Topcom Allure 270

ENGLISH

13.9.2 Using the remote operation

• Call your machine, the unit will turn on after 10 rings and you will hear the OGM

message.

• After the beep, slowly dial the Security code, you will hear one short beeps for

confirmation.

• Enter the next codes to use the desired function.

14 Technical Data

Dialing mode: Tone (DTMF)

Flash: 100/300/600ms

Caller ID: DTMF/FSK

Total recording time: 17 minutes (including OGM, ICM and Conversation

recording time)

Batteries: 3 x 1.5V, AAA non-rechargeable

Power supply: DC 9V

Ambient temperature: +5 °C to +45 °C

Permitted relative air humidity: 25 to 85 %

#1

#2

#3

#4

#5

#7

#8

#9

#0

*1

*2

*3

*4

*5

Broadcast the next message

Broadcast the previous message

Delete the actual message

To stop the operation

To broadcast the outgoing message (Press */# to stop)

To broadcast the message (Press */# to stop)

To broadcast all messages

To broadcast the new messages

Exit the remote control

To change OGM1

To change OGM2

To set the special incoming number. Enter the number and press # to confirm. The

number will be broadcasted for confirmation

To set the monitor function OFF, when the monitor function is on, you can hear the

noise in the room nearby the telephone

To set the monitor function ON

18 Topcom Allure 270

Topcom Allure 270

15 Topcom warranty

15.1 Warranty period

The Topcom units have a 24-month warranty period. The warranty period starts on the day

the new unit is purchased.

Consumables or defects causing a negligible effect on operation or value of the equipment

are not covered.

The warranty has to be proven by presentation of the original purchase receipt, on which the

date of purchase and the unit-model are indicated.

15.2 Warranty handling

A faulty unit needs to be returned to a Topcom service centre including a valid purchase note.

If the unit develops a fault during the warranty period, Topcom or its officially appointed

service centre will repair any defects caused by material or manufacturing faults free of

charge.

Topcom will at its discretion fulfil its warranty obligations by either repairing or exchanging

the faulty units or parts of the faulty units. In case of replacement, colour and model can be

different from the original purchased unit.

The initial purchase date shall determine the start of the warranty period. The warranty period

is not extended if the unit is exchanged or repaired by Topcom or its appointed service

centres.

15.3 Warranty exclusions

Damage or defects caused by incorrect treatment or operation and damage resulting from

use of non-original parts or accessories not recommended by Topcom are not covered by

the warranty.

The warranty does not cover damage caused by outside factors, such as lightning, water and

fire, nor any damage caused during transportation.

No warranty can be claimed if the serial number on the units has been changed, removed or

rendered illegible.

Topcom Allure 270 19

Topcom Allure 270

FRANÇAIS

1 Avant la première utilisation 20

1.1 Utilisation prévue 20

1.2 Identification de l’appelant (Caller ID) 20

1.3 Connexion 20

2 Nettoyage 20

3 Mise au rebut de l’appareil (environnement) 21

4 Conseil de sécurité 21

5 Boutons/DEL 22

6Écran 22

7 Installation 23

7.1 Installation des piles 23

7.2 Installation de l’alimentation et du cordon téléphonique 23

8 Bien démarrer 24

8.1 Initialisation 24

8.2 Réglages 24

8.3 Passer un appel 26

8.4 Rappel du dernier numéro composé 26

8.5 Music on hold 26

8.6 Volume de sonnerie 26

8.7 Touche Flash 26

9 Caller ID 27

9.1 Informations générales 27

9.2 Liste d’appels 27

9.3 Caller ID parlante 27

9.4 Parcourir la liste d’appels 27

9.5 Appeler un numéro de la liste d’appels 27

9.6 Effacer des numéros de la liste d’appels 28

9.7 Liste VIP 28

9.8 Boîte vocale 29

10 Répertoire 29

10.1 Utilisation du clavier alphanumérique 29

10.2 Ajouter un numéro au répertoire 29

10.3 Sélectionner et appeler un numéro du répertoire 29

10.4 Changer un numéro et un nom dans le répertoire 30

10.5 Effacer un numéro et un nom du répertoire 30

11 Numéros de mémoire 30

11.1 Ajouter un numéro à la mémoire directe 30

11.2 Appeler un numéro de mémoire directe 30

12 Mode sommeil 31

13 Répondeur 31

13.1 Enregistrer un message sortant (OGM) 31

13.2 Activer / désactiver le répondeur 32

13.3 Jour et heure 32

13.4 Nombre de sonneries 32

13.5 Messages 32

13.6 Lecture des messages entrants 33

13.7 Enregistrer une conversation 33

13.8 Mémoire pleine 33

13.9 Commande à distance 33

14 Données techniques 34

15 Garantie Topcom 35

15.1 Période de garantie 35

15.2 Traitement de la garantie 35

15.3 Exclusions de garantie 35

20 Topcom Allure 270

Topcom Allure 270

1 Avant la première utilisation

Nous vous remercions d’avoir acheté ce nouveau téléphone de bureau avec identification de

l’appelant.

1.1 Utilisation prévue

Ce produit est prévu pour être connecté à l’intérieur à une ligne téléphonique analogique

PSTN.

1.2 Identification de l’appelant (Caller ID)

L’identification de l’appelant est un service de l’opérateur. Dès que vous serez abonné au

service Caller ID, le téléphone affichera le numéro de téléphone de l’appelant.

1.3 Connexion

Cet appareil a été conçu et fabriqué pour satisfaire à la norme 98/482/EC, en référence à la

connexion paneuropéenne d’un terminal au Public Switching Telephone Network (PSTN) et

suivant les directives établies par la Directive 1999/5/EC sur les équipements

radioélectriques et la reconnaissance réciproque de leur conformité. Toutefois, étant donné

qu’il existe certaines différences dans les PSTN d’un pays à l’autre, les mesures de

vérification en elles-mêmes ne constituent pas une garantie inconditionnelle du

fonctionnement optimal dans tous les points de connexion au PSTN d’un quelconque pays.

Si des problèmes surviennent, veuillez contacter votre distributeur en premier lieu.

En tous cas, le client est tenu de respecter les conditions d’utilisation pour lesquelles le

produit a été créé ainsi que d’éviter d’utiliser le produit dans des réseaux privés ou publics

clairement différents de ceux établis dans l’Union européenne.

2 Nettoyage

Nettoyez le téléphone avec un tissu légèrement humide ou avec un chiffon antistatique.

N’utilisez jamais d’agents de nettoyage ou de solvants abrasifs.

Pour utiliser la fonction ’Caller ID’ (affichage de l’appelant), ce service

doit être activé sur votre ligne téléphonique. Normalement, vous devez

souscrire un abonnement supplémentaire auprès de votre opérateur

pour activer cette fonction. Si vous ne possédez pas la fonction Caller ID

sur votre ligne, les numéros entrants ne s’afficheront PAS à l’écran de

votre téléphone.

La pagina sta caricando ...

Topcom Allure 270 Manuale utente

Questo manuale è adatto anche per

Topcom Allure 270 Manuale utente

in altre lingue

Documenti correlati

Altri documenti