CET NTM50 Manuale del proprietario

Tipo
Manuale del proprietario
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 1
CET
VISUALIZED DIGITAL TIMER
Type:
NTM50
THE INSTRUMENTS OF SERIES NTM ARE DIGITAL
INSTRUMENTS WIDE USABLE IN THE INDUSTRY
FOR THEIR PROGRAMMABLE CHARACTERISTICS
AND THE FLEXIBILITY OF THEIR EMPLOYMENT.
NTM50, TIME TOTALIZER WITH 4 PROGRAMMABLE
TIME SCALES AND A GLOBAL TOTALIZER OF THE
TIME.
GENERAL FEATURES
PROGRAMMABLE PARAMETERS
Frontal keyboard in polycarbonate (antiscratch, antioil,
antacid).
IP65 protection degree
Accessible parameters with key software
Removable terminals connection.
Execution DIN 72 x 72.
Recessed assembly.
Special retaining brackets.
4 Time Scales
Memory
Reset Key
START Input Selection
TECHNICAL CHARACTERISTICS
POWER SUPPLY IN ALTERNATE CURRENT
POWER SUPPLY IN DIRECT CURRENT
POWER SUPPLY TOLERANCE
ABSORPTION
OPERATING TEMPERATURE
CLIMATIC CONDITIONS
TIMINGS VISUALIZATION
TIMINGS SCALES
START INPUT
AUXILIARY INPUTS POWER SUPPLY
COMMAND IMPUTS
PROGRAMMED DATA MEMORY
: Single power 24 - 110 - 230 Vac (50 / 60 Hz).
: Single power 24 Vdc
: +10% - 15%.
: 2 W - 3 VA.
: -5 °C + 55 °C.
: U.R. 95 % at 40 °C (without condensate).
: 5 digits, 11 mm high
: 999h59m - 9h59m59s - 9m59s99c - 999s99c
: programmable as Continuous; Impulsive, Start/Stop
: 24 Vdc - 80 mA available on terminals.
: 1 Start - 1 Reset Timing - 1 Inhibit Timing (Inhibit).
: static (without battery)
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 2
DESCRIPTION OF THE FRONTAL KEYBOARD
ø
WHITE
The key 'LEFT ARROW' in normal operating phase visualizes, blinking, all the programmings executed without the
limitation of the insertion code. The time of scansion of the programmings is given from the pressure of the same
key. It exits automatically from this phase after 5 sec of the last pressure of the same key.
In programming phase it moves the cursor of the figure towards left of a step, than at the beginning it is on the right
side first one on the. At the end it resumes from the first one to right.
ù
WHITE
The key 'UP ARROW' in normal operating phase it enter and exit to the Totalizer.
In programming phase it increases the value of the blinking figure.
ú
BLUE
The key 'PRG' pressed for 2 sec. allows to enter in the programming phase, visualizing on display C.0000.
In the programming phase, pressing key 'PRG' impulsively, it exits from the programming phase. The instrument
exits automatically from the programming phase, 60 sec. after the pressure of the last key.
û
GREEN
The key 'ENT/RES' in normal phase of counting has the 'RESET' function, with the modalities to it attributed in the
programming phase.
In programming phase it confirms and memorizes the visualized data and passes to the successive function. If it has
arrived to list end it resumes from the beginning.
INPUTS / OUTPUTS DESCRIPTION
DC POWER SUPPLY
(inputs 7 - 8) 24VDC Power Supply Input of the instrument.
AC POWER SUPPLY
(inputs 5 - 6) AC Power Supply Input of the instrument; it can be to 24 - 110 - 230 VAC in according to demand.
24 VDC - 80mA
(inputs 9 - 10) 24 VDC - 80 mA auxiliary Power Supply that the instrument supply to feed the Encoder and amplified
proximity.
START
(input 11) START Input that execute the timing starting as the programming mode; it’s configurable in Positive
(PNP) or Negative (NPN) logic by the dip switches on the rear.
RESET
(input 12) RESET Input that execute the timing reset; it’s configurable in Positive (PNP) or Negative (NPN) logic
by the dip switches on the rear.
INHIBIT
(input 13) INHIBIT Input that execute the timing Inhibit; it’s configurable in Positive (PNP) or Negative (NPN) logic
by the dip switches on the rear.
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 3
PROGRAMMING OF THE OPERATION PARAMETERS
The programmable parameters are divided in two groups and protect with a 4 figures code.
In order to approach the programming, proceed in the following way:
- Press key PRG for about 2 sec. On the display appears:
Cod
0000
GROUP 1
:
in order to approach the parameters of group 1, insert code
2357
and press
ENT
SCÄ 1
SCL. = Time Scale. Selection of the maximum time scale of the timing. It’s possible to choose
between 4 different time scales:
1 = 9m59s99c - 2 = 9h59m59s - 3 = 999h59m - 4 = 999s99c
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 4
PROGRAMMING OF THE OPERATION PARAMETERS
The programmable parameters are divided in two groups and protect with a 4 figures code.
In order to approach the programming, proceed in the following way:
- Press key PRG for about 2 sec. On the display appears:
Cod
0000
GROUP 2
:
in order to approach the parameters of group 1, insert code
2413
and press
ENT
NeÆon
NeÆoF
Active or excluded memory.
This parameter allows to program the saving of the current counter value during the power off
the instrument.
MEM.on. = memorization of the count during the power off. When power on the instrument the
display will visualize the last present value in the power off phase.
MEM.of. = excluded memorization of the count; every time that the instrument comes powered
off and then powered on the count comes lost and the instrument restart always from the initial
condition.
RreË 0
reË 3
Function of RESET Key ; this programming enable and disable the RESET function of the
RES frontal key during the normal timing:
RES. 0 = RESET function of the RES key disabled
RES. 1 = RESET function of the principal timing only
RES. 2 = RESET function of the global timing only
RES. 3 = RESET function of the principal and global timings
Iæ Á
Iæ »
Iæ Ë
Programming of the START Input.
This programming allows to Start the timing in three different modes:
In. I. = Impulsive Mode; the timing starts with the impulsive closing of the START input.
In. C. = Continuously Mode; the timing starts with the closing of the START input; the timing
is interrupted every time the START input comes opened.
In. S. = Start/Stop Mode; the timing starts with the impulsive closing of the START input and it
stops to the subsequent closing. Closing another time the input the timing resume and it stops
to the subsequent closing.
¹È È
¹È ê
Activation mode of the programmed parameters.
With this programming is possible to activate the executed programmings directly to the exit of
the programming or, when exited of the programming, after a RESET (with frontal key or from
rear input)
A.P. = P. Activation of the parameters to the exit of the programming.
A.P. = r. Activation of the parameters to the exit of the programming after a RESET.
Pressing the key ù the totalizer of time will be visualized for 5 sec.
Toì
¨0¨00
The totalizer visualizes the total time that the instrument has show.
It can be resetted through frontal key RES or from RESET input when it is visualized on the
display.
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 5
DECLARATION OF ‘CE’ CONFORMITY
CE NORMATIVE CONFORMITY
Borgolavezzaro, October, 03rd 2005
The building firm:
CET s.r.l.
Head office:
Strada Statale 211, Km 53,3
28071 Borgolavezzaro (No) ITALIA
Tel. 0039 - (0)321 - 885301 Fax. 0039 - (0)321 - 885560
declare that the products:
type :
Electronic Timer
model:
NTM 50
use class:
Industrial
are in conformity with the following normatives:
EN55011
ENV50141
ENV50204
EN61000-4-2
EN61000-4-4
The manufacturing:
CET s.r.l.
________________________________
Signature
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 6
Programming Notes
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 7
Programming Notes
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------------------------------------------
CET - s.r.l.
Vers. 1.0
NTM 50
Pag. 8
CONNECTIONS
INPUT SIGNALS
START START
CONTACT CONTACT
NPN PNP
START START
TTL LOGIC TTL LOGIC
NPN PNP
PROGRAMMING PROGRAMMING
NPN PNP
RESET INHIBIT
NPN NPN
RESET INHIBIT
PNP PNP
OVERALL DIMENSIONS (mm)
FRONT SIDE
REAR
DRILL
TEMPLATE
CET
CETCET
CET
CET
CETCET
CET
s.r.l.
Strada Statale 211 Km 53,550
28071 Borgolavezzaro - NO - ITALY
Tel : ++39 0321-885180/885301/885807
Fax : ++39 0321-885560
info@cet-italy.com
www.cet-italy.com
Agent:
11
10
11
9
10
11
9
11
10
12
10
13
9
12
9
13
72
72
ENT
RES
PROG
RL1
NTM
36952
è
CET
RL2
electronic timer
113
85
9
19
67
REMOVABLE
TERMINAL
RETAINING
BRACKETS
10
MAX
67
67
1 2 3 4 5 6 7 8
9 10 11 12 13 14
68
68
+
-
POWER SUPPLY
VAC 24 VDC
RESET
+
-
24 VDC
START
INHIBIT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

CET NTM50 Manuale del proprietario

Tipo
Manuale del proprietario

in altre lingue