Tyan YR188-B537M Manuale utente

http://www.tyan.com

1

YR188-B537M

Service Engineer’s Manual

http://www.tyan.com

2

http://www.tyan.com

3

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is

Neither this manual, nor any material contained herein, may be reproduced

without written consent of manufacturer.

TYAN

®

is a registered trademark of MiTAC International Corporation.

Version 1.00

Disclaimer

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to

printing. MiTAC assumes no liability whatsoever, and disclaims any

express or implied warranty, relating to sale and/or use of TYAN

®

products

including liability or warranties relating to fitness for a particular purpose or

merchantability. MiTAC retains the right to make changes to produce

descriptions and/or specifications at any time, without notice. In no event

will MiTAC be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady resulting

from errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners including,

but not limited to the following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI

Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

http://www.tyan.com

4

Federal Communication Commission (FCC)

Notice for the USA

Compliance Information Statement (Declaration of

Conformity Procedure) DoC FCC Part 15: This

device complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the receiver.

– Plug the equipment into an outlet on a circuit different from that of

the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class A limits for radio interference as

specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe A d’interference radio tel que specifie par le Ministere Canadien

des Communications dans les reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of explosion if

battery is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery according

to manufacturer instructions and in accordance with your local

regulations.

http://www.tyan.com

5

About this Manual

This manual provides you with instructions on installing your TYAN

YR188-B537M. This Manual is intended for experienced users and

integrators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the TYAN YR188-B537M

barebones, standard parts list, describes the external

components, gives a table of key components, and

provides block diagram of the system.

Chapter2:

Covers procedures on installing the CPU, memory

modules and hard drives.

Chapter3:

Covers removal and replacement procedures for

pre-installed components.

Chapter4:

Covers the block diagram, MB layout and pin

definitions for headers and jumpers.

Chapter5:

Covers various BIOS settings that can be used to

configure your system.

Appendix:

List the cable connection and FRU part tables for

reference of system setup, and technical support

in

case a problem arises with your system.

http://www.tyan.com

6

SAFETY INFORMATION

Before installing and using TYAN YR188-B537M, take note of the

following precautions:

·Read all instructions carefully.

·Do not place the unit on an unstable surface, cart, or stand.

·Do not block the slots and opening on the unit, which are provided for

ventilation.

·Only use the power source indicated on the marking label. If you are not

sure, contact the power company.

·The unit uses a three-wire ground cable, which is equipped with a third

pin to ground the unit and prevent electric shock. Do not defeat the

purpose of this pin. If you outlet does not support this kind of plug,

contact your electrician to replace your obsolete outlet.

·Do not place anything on the power cord. Place the power cord where it

will not be in the way of foot traffic.

·Follow all warnings and cautions in this manual and on the unit case.

·Do not push objects in the ventilation slots as they may touch high

voltage components and result in shock and damage to the

components.

·When replacing parts, ensure that you use parts specified by the

manufacturer.

·When service or repairs have been done, perform routine safety checks

to verify that the system is operating correctly.

·Avoid using the system near water, in direct sunlight, or near a heating

device.

·Cover the unit when not in use.

http://www.tyan.com

7

Table of Contents

Chapter 1: Overview.........................................................................9

1.1 About the TYAN YR188-B537M ............................................... 9

1.2 Product Models....................................................................... 10

1.3 Features.................................................................................. 11

1.4 Standard Parts List ................................................................. 15

1.4.1 Box Contents Per Node................................................... 15

1.4.2 Accessories ..................................................................... 16

1.5 About the Product................................................................... 18

1.5.1 System Front View (Per Node)........................................ 18

1.5.2 System Rear View (Per Node) ........................................ 20

1.5.3 Internal View (Per Node) ................................................. 21

Chapter 2: Setting Up.....................................................................23

2.0.1 Before you Begin ............................................................. 23

2.0.2 Work Area........................................................................ 23

2.0.3 Tools ................................................................................ 23

2.0.4 Precautions...................................................................... 24

2.1 Installing Motherboard Components....................................... 25

2.1.1 Installing Hard Drives....................................................... 25

2.1.2 Installing the CPU and Heatsink...................................... 28

2.1.3 Installing the Memory....................................................... 31

2.2 Rack Mounting........................................................................ 33

2.2.1 Installing the Server in a Rack......................................... 33

2.2.2 Installing the inner Rails to the Chassis........................... 34

2.2.3 Installing the Outer Rails to the Rack .............................. 35

2.2.4 Rack mounting the Server ............................................... 36

Chapter 3: Replacing Pre-Installed Components ........................ 37

3.1 Introduction ............................................................................. 37

3.2 Disassembly Flowchart........................................................... 37

3.3 Removing the Cover............................................................... 39

3.4 Replacing Motherboard Components..................................... 39

3.4.1 Replacing Expansion Card .............................................. 39

3.4.2 Disconnecting All Motherboard Cables ........................... 41

3.4.3 Removing the Motherboard ............................................. 42

3.5 Replacing the Power Distribution Board ............................... 43

3.6 Replacing the Front Panel Board.......................................... 44

3.6.1 Front Panel Board Features ............................................ 46

3.6.2 Front Panel Board Connector Pin Definition ................... 46

3.7 Replacing the System Fan.................................................... 47

http://www.tyan.com

8

3.8 Replacing the SATA Backplane Board................................. 49

3.8.1 SATA Backplane Board Features.................................... 50

3.8.2 SATA Backplane Board Connector Pin Definitions ......... 51

Chapter 4: Hardware Setup............................................................55

4.1 Motherboard (S537M) Image ................................................. 55

4.2 System Block Diagram ........................................................... 56

4.3 Board Parts, Jumpers and Connectors .................................. 57

4.4 Installing Optional SO-DIMM modules ................................... 63

Chapter 5: BIOS Setup ................................................................... 65

5.1 About the BIOS....................................................................... 65

5.2 BIOS Menu Bar....................................................................... 65

5.3 Setup Basics........................................................................... 66

5.4 Getting Help............................................................................ 66

5.5 In Case of Problems ............................................................... 66

5.6 BIOS Main Menu .................................................................... 67

5.7 Advanced Menu...................................................................... 68

5.7.1 CPU Configuration........................................................... 70

5.7.2 IDE Configuration Sub-Menu........................................... 72

5.7.3 Super IO Configuration Sub-Menu .................................. 76

5.7.4 USB Configuration Sub-Menu ......................................... 77

5.7.5 ACPI Configuration Sub-Menu ........................................ 80

5.7.6 AHCI Configuration Sub-Menu ........................................ 83

5.7.7 APM Configuration........................................................... 85

5.7.8 Event Log Configuration Sub-Menu ................................ 87

5.7.9 Hardware Health Configuration Sub-Menu ..................... 88

5.7.10 PCI Express Configuration Sub-Menu........................... 92

5.7.11 Remote Access Configuration Sub-Menu ..................... 93

5.8 PCI PnP Menu ........................................................................ 95

5.9 Boot Menu .............................................................................. 97

5.9.1 Boot Settings Configuration Sub-Menu ........................... 98

5.9.2 Boot Device Priority Sub-menu ..................................... 100

5.9.3 Hard Disk Drives Sub-menu .......................................... 101

5.9.4 CD/DVD Drives Sub-menu ............................................ 102

5.10 Security Menu..................................................................... 103

5.11 Chipset Menu...................................................................... 105

5.11.1 North Bridge Configuration Sub-Menu ........................ 106

5.11.2 South Bridge Configuration Sub-Menu........................ 108

5.12 Exit Menu............................................................................ 110

Appendix I: Cable Connection Tables ........................................ 113

Appendix II: FRU Parts Table ...................................................... 115

Appendix III: Technical Support.................................................. 117

http://www.tyan.com

9

Chapter 1: Overview

1.1 About the TYAN YR188-B537M

Congratulations on your purchase of the TYAN

®

YR188-B537M, a highly

optimized rack-mountable barebone system. The YR188-B537M is

designed to support one Intel

®

5200/5400 processor and up to 32GB

DDR2-667/533 memory per node, providing a rich feature set and

incredible performance. Leveraging advanced technology from Intel

®

,

YR188-B537M server system is capable of offering scalable 32 and 64-bit

computing, high bandwidth memory design, and lightning-fast PCI-E bus

implementation. The YR188-B537M not only empowers your company in

nowadays IT demand but also offers a smooth path for future application

usage.

TYAN

®

is also proud to deliver the YR188-B537M in flavor while

supporting up to eight hot-swap hard drives (four per node). The

YR188-B537M uses TYAN

®

’s latest chassis featuring a robust structure

and a solid mechanical enclosure. All of this provides YR188-B537M the

power and flexibility to meet the needs of nowadays server application.

http://www.tyan.com

10

1.2 Product Models

Model HDD Bays Power supply

B537MY188S1

(one node)

Hot-swap, 4 HDDs (1) 450W

B537MY188S2

(two nodes)

Hot-swap, 8 HDDs (2) 450W

http://www.tyan.com

11

1.3 Features

TYAN YR188-B537M (B537MY188S2)

Form Factor

1U Rackmount

Chassis Name

YR188

Dimension (H x W x D)

1.71" x 17.26" x 28.74" (43.5 x 438.5 x 730mm)

Node Carrier Dimension

1.61" x 8.35" x 28.74" (40.8 x 212 x 730mm)

System

Feature

Two nodes in one chassis

Buttons

(1) RST / (1) ID / (1) PWR

LEDs

(1) Power / (1) BMC / (2) LAN / (1) HDD

Front Panel

I/O Ports

(2) USB ports

Type / Q'ty

2.5" Hot-Swap / (4) per node, total (8)

External Drive

Bay

Supported HDD

Interface

SATA-II 3.0Gb/s

System Cooling

Configuration

FAN (3) 4cm fans per node, total (6)

Output Watts

(1) 450 Watts per node, total (2)

Power Supply

Efficiency

PFC

Supported CPU Series

Intel® Xeon® processor 5400/5200 series

Socket Type / Q'ty

LGA771

Thermal Design Power

(TDP) wattage

80W

Processor

System Bus

FSB 1333/1066MHz

MCH / ICH

Intel 5100 / ICH9R

Chipset

Super I/O

Winbond W83627DHG

Supported DIMM Qty

(8) DIMM sockets per node, total (16)

DIMM Type / Speed

DDR2 667/533 RDIMM

Capacity

Up to 32GB RDIMM per node, total 64GB

Memory

Memory channel

2 Channels

PCI-E

(1) PCI-E Low-Profile x16 slot per node, total (2)

Expansion Slots

Pre-installed TYAN Riser

Card

M2087-R, PCI-E x16 1U riser card (right)

Port Q'ty

(2) per node, total (4)

LAN

Controller

Intel 82571EB

Controller

ICH9R

Speed

3.0 Gb/s

Storage SATA

RAID

RAID 0/1/10/5 (Intel

®

Matrix RAID)

Graphic Chipset

XGI Volari™ Z9s

http://www.tyan.com

12

USB

(4) ports (2 at front, 2 at rear) per node, total (8)

COM

(1) DB-9 port per node, total (2)

VGA

(1) D-sub port per node, total (2)

I/O Ports

RJ-45

(3) ports per node, total (6)

Chipset Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Temperature Monitors temperature for CPU & system environment

LED

Fan fail LED indicator / Over temperature warning

indicator

System Monitoring

Others Watchdog timer support

Optional SMDC M3296 IPMI 2.0 remote system management card

Server

Management

M3296 Feature

KIRA 100 (Single Chip KVM/IP+IPMI processor) / KVM

over IP / Video output over LAN (1280x1024) / Card

interface: DDR2 SO-DIMM socket / USB2 high speed

interface / Remote CD-ROM (media) redirect / Remote

power on/off, reset and soft off

Brand / ROM size AMI / 1MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE

boot / ACPI 2.0 power management /Power on mode

after power recovery / User-configurable H/W monitoring

/ Auto-configurable of hard disk types / Multiple boot

options

Operating System OS supported list

Please refer to our OS supported list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating Humidity 90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Barebone (1) B537MY188S2 Barebone

Manual (1) MB Quick Reference + (1) BB User's manual

Installation CD (1) TYAN installation CD

Heatsink / Cooler (2) LGA771 CPU heatsinks

Rail kit (1) sliding rail kit

Contains

Cable Power Cord

(2) CCBL-0310, US type power cord / (2) CCBL-0300, EU

type power cord

Optional

accessories for

future upgrade

SMDC IPMI Card M3296

http://www.tyan.com

13

TYAN YR188-B537M (B537MY188S1)

Form Factor

1U Rackmount

Chassis Name

YR188

Dimension (H x W x D)

1.71" x 17.26" x 28.74" (43.5 x 438.5 x 730mm)

Node Carrier Dimension

1.61" x 8.35" x 28.74" (40.8 x 212 x 730mm)

System

Feature

One nodes in one chassis

Buttons

(1) RST / (1) ID / (1) PWR

LEDs

(1) Power / (1) BMC / (2) LAN / (1) HDD

Front Panel

I/O Ports

(2) USB ports

Type / Q'ty

2.5" Hot-Swap / (4) per node

External Drive

Bay

Supported HDD

Interface

SATA-II 3.0Gb/s

System Cooling

Configuration

FAN (3) 4cm fans per node

Output Watts

(1) 450 Watts per node

Power Supply

Efficiency

PFC

Supported CPU Series

Intel® Xeon® processor 5400/5200 series

Socket Type / Q'ty

LGA771

Thermal Design Power

(TDP) wattage

80W

Processor

System Bus

FSB 1333/1066MHz

MCH / ICH

Intel 5100 / ICH9R

Chipset

Super I/O

Winbond W83627DHG

Supported DIMM Qty

(8) DIMM sockets per node

DIMM Type / Speed

DDR2 667/533 RDIMM

Capacity

Up to 32GB RDIMM per node

Memory

Memory channel

2 Channels

PCI-E

(1) PCI-E Low-Profile x16 slot per node

Expansion Slots

Pre-installed TYAN Riser

Card

M2087-R, PCI-E x16 1U riser card (right)

Port Q'ty

(2) per node

LAN

Controller

Intel 82571EB

Controller

ICH9R

Speed

3.0 Gb/s

Storage SATA

RAID

RAID 0/1/10/5 (Intel

®

Matrix RAID)

Graphic Chipset

XGI Volari™ Z9s

USB

(4) ports (2 at front, 2 at rear) per node

I/O Ports

COM

(1) DB-9 port per node

http://www.tyan.com

14

VGA

(1) D-sub port per node

RJ-45

(3) ports per node

Chipset Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Temperature Monitors temperature for CPU & system environment

LED

Fan fail LED indicator / Over temperature warning

indicator

System Monitoring

Others Watchdog timer support

Optional SMDC M3296 IPMI 2.0 remote system management card

Server

Management

M3296 Feature

KIRA 100 (Single Chip KVM/IP+IPMI processor) / KVM

over IP / Video output over LAN (1280x1024) / Card

interface: DDR2 SO-DIMM socket / USB2 high speed

interface / Remote CD-ROM (media) redirect / Remote

power on/off, reset and soft off

Brand / ROM size AMI / 1MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE

boot / ACPI 2.0 power management /Power on mode

after power recovery / User-configurable H/W monitoring

/ Auto-configurable of hard disk types / Multiple boot

options

Operating System OS supported list Please refer to our OS supported list.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating Humidity 90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Barebone (1) B537MY188S1 Barebone

Manual (1) MB Quick Reference + (1) BB User's manual

Installation CD (1) TYAN installation CD

Heatsink / Cooler (1) LGA771 CPU heatsink

Rail kit (1) sliding rail kit

Contains

Cable Power Cord

(2) CCBL-0310, US type power cord / (2) CCBL-0300, EU

type power cord

Optional

accessories for

future upgrade

SMDC IPMI Card M3296

http://www.tyan.com

15

1.4 Standard Parts List

This section describes the YR188-B537M package contents and

accessories. Open the box carefully and ensure that all components are

present and undamaged. The product should arrive packaged as

illustrated below.

1.4.1 Box Contents Per Node

Component Description

1U chassis, 2 nodes (B537MY188S2)

1U chassis, 1 node (B537MY188S1)

(4) hot swap HDD bays per node

TYAN

®

S537M system board

(pre-installed)

450W single Power Supply

(pre-installed)

(3) System FAN

(pre-installed)

Power Distribution Board

(pre-installed)

SATA HDD Backplane Board

(pre-installed)

M2087-R PCI-E riser card

(pre-installed)

Front Panel Board

(pre-installed)

http://www.tyan.com

16

1.4.2 Accessories

If any items are missing or appear damaged, contact your retailer or

browse to TYAN

®

’s website for service: http://www.tyan.com

The web site also provides information of other TYAN

®

products, as

well as FAQs, compatibility lists, BIOS settings, etc.

1 x TYAN

®

Motherboard Drive

CD

1 Heatsink (B537MY188S1)

2 Heatsinks (B537MY188S2)

HDD Screws

Power Cables

(Left to right: Europe, US)

1 Europe + 1 US (B537MY188S1)

2 Europe + 2 US (B537MY188S2)

Barebone Manual Mainboard Quick Reference

http://www.tyan.com

17

Rail Kit

Rail x 2 Screw Pack

http://www.tyan.com

18

1.5 About the Product

The following views show you the product.

1.5.1 System Front View (Per Node)

HDD LED Description

Activity LED: Off

Fault LED: Off

Drive present, no activity

Activity LED: blinking green

Fault LED: Off

Drive present, with activity

Activity LED: Off

Fault LED: Red

HDD Fail

Activity LED: random

Fault LED: blinking red @ 4 Hz

Identify

Activity LED: random

Fault LED: blinking red @ 1 Hz

Rebuild

http://www.tyan.com

19

Front Panel LED Description

Power Green: Power On

IPMI

Green: Normal Status

Amber: System Failed

Without IPMI module:

FAN failed

system thermal problem

With IPMI module:

IPMI fault alert event is raised.

LAN1

Green: Link

Blinking Green: Activity

LAN2

Green: Link

Blinking Green: Activity

HDD

Green: Ready

Blinking Green: Activity

Red: TBD

Front Panel Button Description

Power On/ Off Power up and power down the system (Use a pin)

ID (UID)

Press once and the blue ID LED on the rear panel

will light up

Reset Press to reset the system

http://www.tyan.com

20

1.5.2 System Rear View (Per Node)

ÆID LED: When the ID button on the front panel is pressed, the blue

ID LED on the rear panel will light up. The technical personnel

can easily locate the system on the rack, disconnect cables

from the system, and remove it from the rack for later repair.

ÆLAN LED: The three onboard Ethernet ports have green and

amber LEDs to indicate LAN status. The table below illustrates

the different LED states.

Ethernet LAN Link/Activity LED Description

Left: slow blinking green

Right: Off

10 Mbps Link

Left: blinking green

Right: Off

10 Mbps Activity

Left: slow blinking green

Right: green

100 Mbps Link

Left: blinking green

Right: green

100 Mbps Activity

Left: slow blinking green

Right: amber

1000 Mbps Link

La pagina sta caricando ...

Tyan YR188-B537M Manuale utente

Tyan YR188-B537M Manuale utente

in altre lingue

Documenti correlati

Altri documenti