TEAC PC-D825 Manuale del proprietario
- Categoria
- Lettore CD
- Tipo
- Manuale del proprietario
OWNER'S MANUAL
WARRANTY INFORMATION INSIDE. PLEASE READ
FOR INQUIRES, CALL
1800 656 700
OR WWW.TEAC.COM.AU
IMPORTANT!
PORTABLE COMPACT DISC SYSTEM
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:141
WARRANTY PROCEDURES
Please keep this information for your own records.
Please refer to the owner’s manual to ensure that you have followed the correct installation and
operating procedures.
1. Read owner’s manual carefully
2. If you require Warranty Service, please contact the TEAC Service Centre
3. Please have your purchase receipt as your proof of purchase and the following details
completed for a valid Warranty.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
4. Please ensure that your product is packed appropriately upon return to the service centre.
If you have any other queries regarding service or warranty please contact the TEAC Service below:
TEAC Total Care Ph: 1800 656 700
www.teac.com.au
R
R
WARRANTY REGISTRATION
Please read this warranty card.
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
Warranty Terms & Conditions
1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and
workmanship under normal domestic use and authorises free service during the warranty period at any
TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in
Australia.
2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty
Periods Table from the date of purchase.
3. All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be
repaired or replaced at the sole judgement of TEAC.
4. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as
cleaning VCR heads etc.)
5. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered
with, altered or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.
*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual
6. In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this
warranty certificate and of your purchase receipt must be enclosed to be a valid warranty. Such
equipment or parts must be sent freight prepaid to the nearest authorised TEAC Service Centre. After the
repair, the unit will be available for collection by the owner or it will be returned to the owner. The
warranty does not cover freight or insurance. In all cases of in-transit damages or loss, a claim must be
filed against the carrier by the purchaser.
7. In home service will only be provided as part of this warranty if all the following conditions are met;
a) The product is a Colour Television of 51cm screen size or over.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Service Provider.
In any other situation or circumstance, where an in home service call is made, a service fee will be
charged by the Service Provider.
8. TEAC Total Care in home service and installation is available at competitive rates.
9. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in
connection with the sale of any equipment other than as stated in this warranty and outlined above.
10. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted
operations or other causes.
11. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,
TEAC PRODUCT
WARRANTY PERIOD
Televisions / Plasma 106 cm and above 1 Year (In-Home Service Included)
LCD televisions 56cm and above 1 Year (In-Home Service Included)
Televisions – 51cm and above 1 Year (In-Home Service Included)
Televisions under 51 cm 1 Year (No In-Home Service)
Digital Set Top Boxes 1 Year (No In-Home Service)
VCR 1 Year (No In-Home Service)
DVD 1 Year (No In-Home Service)
Audio Systems 1 Year (No In-Home Service)
R
WARRANTY PROCEDURES
Please keep this information for your own records.
Please refer to the owner’s manual to ensure that you have followed the correct installation and
operating procedures.
1. Read owner’s manual carefully
2. If you require Warranty Service, please contact the TEAC Service Centre
3. Please have your purchase receipt as your proof of purchase and the following details
completed for a valid Warranty.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
4. Please ensure that your product is packed appropriately upon return to the service centre.
If you have any other queries regarding service or warranty please contact the TEAC Service below:
TEAC Total Care Ph: 1800 656 700
www.teac.com.au
R
R
WARRANTY REGISTRATION
Please read this warranty card.
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
Warranty Terms & Conditions
1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and
workmanship under normal domestic use and authorises free service during the warranty period at any
TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in
Australia.
2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty
Periods Table from the date of purchase.
3. All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be
repaired or replaced at the sole judgement of TEAC.
4. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as
cleaning VCR heads etc.)
5. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered
with, altered or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.
*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual
6. In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this
warranty certificate and of your purchase receipt must be enclosed to be a valid warranty. Such
equipment or parts must be sent freight prepaid to the nearest authorised TEAC Service Centre. After the
repair, the unit will be available for collection by the owner or it will be returned to the owner. The
warranty does not cover freight or insurance. In all cases of in-transit damages or loss, a claim must be
filed against the carrier by the purchaser.
7. In home service will only be provided as part of this warranty if all the following conditions are met;
a) The product is a Colour Television of 51cm screen size or over.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Service Provider.
In any other situation or circumstance, where an in home service call is made, a service fee will be
charged by the Service Provider.
8. TEAC Total Care in home service and installation is available at competitive rates.
9. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in
connection with the sale of any equipment other than as stated in this warranty and outlined above.
10. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted
operations or other causes.
11. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,
TEAC PRODUCT
WARRANTY PERIOD
Televisions / Plasma 106 cm and above 1 Year (In-Home Service Included)
LCD televisions 56cm and above 1 Year (In-Home Service Included)
Televisions – 51cm and above 1 Year (In-Home Service Included)
Televisions under 51 cm 1 Year (No In-Home Service)
Digital Set Top Boxes 1 Year (No In-Home Service)
VCR 1 Year (No In-Home Service)
DVD 1 Year (No In-Home Service)
Audio Systems 1 Year (No In-Home Service)
R
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
The ventilation should not be impeded by covering the ventilation openings
with items, such as newspapers, table-cloths, curtains, etc.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit
off when not in use or move it away from the affected radio tuner.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
The lightning flash and
arrowhead within the
triangle is a warning sign
alerting you of
"dangerous voltage"
inside the product.
The exclamation point within
the triangle is a warning sign
alerting you of important
instructions accompanying
the product.
WARNING : TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
DANGER
This product contains a low power laser device.
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism, designed with built-in
safeguards. Do not attempt to disassemble, refer to qualified service personnel.
Exposure to this invisible laser light beam may be harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER
LIGHT BEAM EXPOSURE.
The marking plate are indicated on the bottom side of the unit.
CLASS 1 LASER
PRODUCT
CAUTION
INVISIBLE LASER
RADIATION WHEN OPEN
AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO
BEAM.
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:142
18
12
15
5
10
9
8
30
23
25
27
11
29
1
32
31
2
24
28
26
6
33
3
4
7
17
22
30
21
13
20
19
14
16
LOCATION OF CONTROLS
1. VOLUME KNOB
2. FUNCTION SWITCH
3. DBS ON/OFF SWITCH
4. HEADPHONE JACK
5. CD DOOR
6. CASSETTE PAUSE KNOB
7. CASSETTE STOP/EJECT KNOB
8. CASSETTE FAST FORWARD KNOB
9. CASSETTE REWIND KNOB
10. CASSETTE PLAY KNOB
11. CASSETTE RECORD KNOB
12. CD DOOR OPEN KNOB
13. FM STEREO INDICATOR
14. BAND SWITCH
15. DIAL SCALE
16. TUNING KNOB
17. HANDLE
18. TELESCOPIC ANTENNA
19. CD TRACK DISPLAY
20. CD PROGRAM INDICATOR
21. CD REPEAT INDICATOR
22. CD PLAY / PAUSE INDICATOR
23. CD BACK SKIP / SEARCH BACKWARD BUTTON
24. CD PROGRAM BUTTON
25. CD NEXT SKIP / SEARCH FORWARD BUTTON
26. CD STOP BUTTON
27. CD PLAY / PAUSE BUTTON
28. CD REPEAT BUTTON
29. CASSETTE DOOR
30. SPEAKER
31. AC SOCKET
32. BATTERY COMPARTMENT DOOR
33. CD RANDOM BUTTON
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:143
POWER SOURCE
BATTERY POWER OPERATION
1. Open the BATTERY COMPARTMENT DOOR by pushing the catches downwards.
2. Install 8 x UM2 batteries carefully as indicated in battery compartment.
3. Close the BATTERY COMPARTMENT DOOR.
AC POWER OPERATION
Connect receptacle end of the mains lead to the AC SOCKET and the plug to an AC outlet.
OPERATION OF UNIT
FUNCTION SWITCH
* Position RADIO for :
- Radio reception
- Recording from radio
* Position CD for :
- Playing compact disc
- Recording from compact disc
* Position TAPE for :
- Switching off the radio and CD
- Cassette playback
SOUND ADJUSTMENT
VOLUME
The level of sound reproduced by loudspeakers or stereo headphones is adjusted by rotating the VOLUME
KNOB.
DBS
When the DBS ON/OFF SWITCH is selected to ON position, the dynamic low frequency ranges are
boosted.
NOTE
During recording, to adjust VOLUME KNOB only affects the monitor sound but not the content of recording.
RADIO OPERATION
RECEPTION OF RADIO PROGRAMME
1. Set the FUNCTION SWITCH to the RADIO position. Set the desired radio band with the BAND
SWITCH.
2. Tune in a desired station by tuning the TUNING KNOB.
3. For FM reception, extend the antenna and adjust the direction, length and angle to have the best
reception.
4. For AM reception, rotate the unit to have the best reception.
5. Adjust the VOLUME KNOB for your desired listening level.
6. To turn off the radio, set the FUNCTION SWITCH to the TAPE / POWER OFF position.
PLAYING COMPACT DISC
- Set FUNCTION SWITCH to CD position.
- Push down the CD DOOR OPEN KNOB to open the CD DOOR. Place a CD into the compact disc
compartment and close the CD DOOR.
- The CD TRACK DISPLAY will show the total number of tracks after a few seconds.
-"
" will be displayed when there is no CD inside the CD compartment.
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:144
CD PLAY / PAUSE BUTTON
Press once to start playing the CD, the CD TRACK DISPLAY will show the first track and the CD PLAY /
PAUSE INDICATOR will be lighted on. Press once again to stop playing the CD temporary. The CD PLAY /
PAUSE INDICATOR will be flashing. Press once again to resume playing.
CD STOP BUTTON
Press once to stop playing the CD.
CD NEXT SKIP / SEARCH FORWARD BUTTON
Press once to skip to next track. Press and hold to search for a desired position at high speed forward.
Release the button to resume normal play.
CD BACK SKIP / SEARCH BACKWARD BUTTON
Press once to skip back to the beginning of the current track. Press repeatedly to go to previous track.
Press and hold to search for a desired position at high speed backward. Release the button to resume
normal play.
CD REPEAT BUTTON
- Press once for single track repeat playing and the CD REPEAT INDICATOR will be flashing.
- Press twice for all tracks repeat playing and the CD REPEAT INDICATOR will be lighting.
- To cancel the repeat play mode, press the CD REPEAT BUTTON once or twice until the CD REPEAT
INDICATOR turn off.
To remove the CD from the unit, press CD STOP BUTTON and press once the CD DOOR OPEN KNOB.
Then the CD DOOR will be opened and take out the CD.
To turn off the CD playing, set the FUNCTION SWITCH to TAPE / POWER OFF position.
CD PROGRAM PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be
programmed.
1. Press once the CD PROGRAM BUTTON, the CD PROGRAM INDICATOR and " 0 1 " will be flashing in
CD TRACK DISPLAY.
2. Press the "CD BACK SKIP / SEARCH BACKWARD" and / or "CD NEXT SKIP / SEARCH FORWARD"
BUTTONS to select the desired track number.
3. Press once the CD PROGRAM BUTTON again to memorize the track.
4. Repeat steps 2 and 3 until all desired tracks are programmed.
5. Press the CD PLAY / PAUSE BUTTON to start playing. CD PROGRAM INDICATOR is lightning.
6. Press the CD STOP BUTTON to stop programmed playback.
7. Press the CD PLAY / PAUSE BUTTONS to resume programmed playback.
8. Open the CD DOOR or turn off the CD playing to clear the programmed memory.
9. When in stop mode, press CD STOP button can clear program memories also.
NOTE : Programming can only be made when the CD playing is in stop mode.
RANDOM BUTTON
Press once to enter random playing mode. The number of songs will be played in a random sequence.
Press once more to enter normal playing mode.
CASSETTE TAPE
Open the CASSETTE DOOR by pressing the CASSETTE STOP/EJECT KNOB . Insert the cassette with the
full reel to the right and the tape slot at the top. The cassette fits into the unit only in the correct position.
Close by pushing the top of the CASSETTE DOOR to put the cassette in place. Now the unit is ready to
operate. To play the second track, press the CASSETTE STOP/EJECT KNOB and remove the cassette.
Turn the cassette over and reinsert it as previously.
PLAYBACK
Set the FUCTION SWITCH to the TAPE / POWER OFF position.
1. Press the CASSETTE STOP/EJECT BUTTON and insert the recorded cassette.
2. Press the CASSETTE PLAY KNOB.
3. Adjust the VOLUME KNOB for your desired sound level.
4. Press the CASSETTE STOP/EJECT KNOB to stop play back at any position. When the tape is
wound completely, the CASSETTE PLAY KNOB will be released automatically.
5. Press CASSETTE PAUSE KNOB to pause tape movement while playing. Release it to resume.
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:145
RECORDING
* Press the CASSETTE STOP/EJECT KNOB and insert a blank cassette.
* This unit has an automatic level control (ALC) circuit and does not require any
adjustment of VOLUME KNOB while recording.
* Press the CASSETTE STOP/EJECT KNOB to stop recording at any position
* Press the CASSETTE PAUSE KNOB to pause tape movement. Release it to resume.
* When the tape is wound completely, the CASSETTE REC and PLAY KNOBS will be released
automatically.
(A) RECORDING FROM THE BUILT-IN RADIO
1. Set the FUNCTION SWITCH to the RADIO position. Tune in a desired radio programme as described
in "Reception of Radio Programme".
2. Press the CASSETTE REC and PLAY KNOBS simultaneously.
3. You may want to monitor during recording. You can adjust the sound level with rotating the VOLUME
KNOB. These adjustment do not affect the level of recording.
(B) RECORDING FROM CD
1. Set FUNCTION SWITCH to CD position.
2. Play the CD player as described before.
3. Press the CASSETTE RECORD and PLAY KNOBS simultaneously to start recording.
4. You may want to monitor during recording. You can adjust the sound level with rotating the VOLUME
control. These adjustment do not affect the level of recording.
TO AVOID ACCIDENTAL ERASING
Whenever a recording is made, the sound previously recorded is erased automatically. To protect valuable
recordings from accidental erasing, the unit and cassette are equipped with safety devices. To keep the
recorded material permanently, break out the tabs on the back of cassette with a knife or screw driver. To
protect the top side of the tape from accidental erasing, break out the right side tab. To record on a cassette
from which the tabs have been removed, simply attach adhesive tape over the tab opening. The REC
button will not lock in when a cassette tab has been removed.
MAINTENANCE
To ensure continued high performance from your unit, clean the heads and pinch roller periodically.
Failure to clean these parts will result in inferior sound quality, distortion of recording, deterioration of high
frequency reproduction and inconsistant tape speed.
1. Press the CASSETTE STOP/EJECT KNOB and open the CASSETTE DOOR.
2. Press the CASSETTE PLAY KNOB.
3. Moisten a cotton bud with cleaner or alcohol and apply to the faces of both heads, rubbing gently until
all traces of dirt or oxide are removed. Also clean the surfaces of the pinch roller and the capstan.
4. Dry, clean and polish the faces of the heads with piece of soft cloth.
NOMINAL SPECIFICATIONS
Power Sources : AC240V, 50Hz
DC12V (8xUM2 Batteries - not included)
Power Output : 1.2 Watt RMS per channel
Frequency Range : FM 88-108 MHz
AM 531-1602 KHz
Tape Speed : 4.75 cms per second
Wow and Flutter : <0.4%
Frequency Response : Cassette - 125 Hz-6000 Hz ; CD - 125 Hz - 15000 Hz
Dimensions : 262(L) x 268(W) x 175(H) MM
Weight : 2.16 KGS
Weight and dimensions are approximate because we continually strive to improve our products,
specifications may change without prior notice.
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:146
TEAC TOTAL CARE
info
@teac.com.au
or visit our website at http://www.teac.com.au
Freecall telephone 1800-656700 between Monday to Friday - EST 9am to 5pm
[New Zealand: TOLL FREE 0508 347328, 8am to 4:30pm]
TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan. Phone : (0422) 52-5081
TEAC AUSTRALIA A.B.N. 80 005 408 462
PTY., LTD.
HEAD OFFICE 280 William St., Melbourne VIC 3000. Phone: (03) 9672-2400
NSW OFFICE Unit 8, 20-22 Foundry Rd., Seven Hills, NSW 2147. Phone: (02) 8811-4000
QLD OFFICE 335 Montague Road, West End, QLD 4101. Phone: (07) 3010-0100
WA OFFICE 273 Great Eastern Highway, Belmont, WA 6104 Phone: (08) 9479-6522
SA OFFICE Cnr. Sir D. Bradman & Marion Roads, Cowandilla, SA 5033 Phone: (08) 8234-1044
Teac PCD825 (AUST).p65 2004/7/27, ¤U¤È 03:147
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
TEAC PC-D825 Manuale del proprietario
- Categoria
- Lettore CD
- Tipo
- Manuale del proprietario
in altre lingue
- English: TEAC PC-D825 Owner's manual
Documenti correlati
-
TEAC PC-D803 Manuale del proprietario
-
-
-
-
-
-
TEAC AD-500 Manuale utente
-
-
-