Blackmagic Fairlight Console Manuale utente

English, 日本語, Français, Deutsch, Español, 中文,

한국어, Русский, Italiano, Português and Türkçe.

Fairlight Console

Assembly

Instruction Manual

February 2020

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 31

Français 60

Deutsch 89

Español 118

中文 147

한국어 176

Русский 205

Italiano 234

Português 263

Türkçe 292

Welcome

Thank you for purchasing a Blackmagic Fairlight console for your audio post production!

Fairlight has been the premiere audio post production suite in the film and television industries

for decades. It has a long history of innovative software and hardware engineering that’s led the

way for music and audio production. We are excited about the new Fairlight console and believe

you will enjoy your experience with it.

Your Fairlight console is customizable, letting you install just the Fairlight modules you want

depending on the number of bays in your console. Modules include the Fairlight Console

Channel Control, Fairlight Console Channel Fader, Fairlight Console Audio Editor and Fairlight

Console LCD Monitor. You can install the modules and build your system to suit your own needs.

All the fine controls in each module are designed for precision handling and finesse, featuring

illuminated buttons with easy to read LCDs that let you monitor your settings and know exactly

what is happening at all times. The faders are also servo assisted, so they are able to be saved

and recalled while maintaining sync with DaVinci Resolve. There is nothing like watching the

faders reacting to your adjustments in realtime while monitoring your audio mix!

With your Fairlight console and DaVinci Resolve’s Fairlight page, you have the tools you need to

shape your audio just the way you want it.

This instruction manual will guide you through assembling your Fairlight console, installing the

Fairlight console modules and getting started with DaVinci Resolve so you can quickly start using

your Fairlight console.

Also, please check the support page on our website at www.blackmagicdesign.com for the

latest version of this manual and for updates to DaVinci Resolve. Keeping your software up to

date will ensure you get all the latest features! We are continually working on new features and

improvements, so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

English

Contents

Fairlight Console Assembly

Fairlight Console Assembly 4

Fairlight Console Components 5

Unpacking and Assembling 7

Tools Required 8

Attaching the Legs to the Console Chassis 8

Alternative Assembly with Two or More People 11

Installing the Fairlight Panels 12

Attaching the Monitor Inﬁll Module 15

Powering the Modules 16

Connecting the Fairlight Modules 17

Configuring the Fairlight Modules 18

Fairlight Panel Setup 19

Changing Network Settings 21

Fairlight Studio Utility 22

Selecting your Fairlight Console in DaVinci Resolve 24

Technical Specifications 25

Fairlight Road Case Dimensions 25

Fairlight Console Dimensions and Weight 25

Fairlight Panels Dimensions and Weight 26

Power Consumption 26

Operating Temperature 26

Help 27

Regulatory Notices 28

Safety Information 29

Warranty 30

Fairlight Console Components

The Fairlight console is available in 4 configurations that let you build your console to suit

yourproduction requirements. Fairlight modules, for example the Fairlight Console Channel

Control, Fairlight Console Channel Fader, Fairlight Console Audio Editor, and the Fairlight

Console LCD Monitor, are installed into the module slots within the Fairlightconsole chassis.

Fairlight 3 Bay Console

The illustration above shows a fully assembled Fairlight 3 Bay console. In a typical 3 bay

configuration, the Fairlight Console Channel Control and Fairlight Console Channel Fader

modules are installed on each side of the Fairlight Console Audio Editor. However you can

place modules in any position you prefer, as your Fairlight console is fully customizable.

On a 4 and 5 bay configuration, additional modules can be installed on each side.

Fairlight 5 Bay Console

5

4

1

7

6

2

3

1. Fairlight Console LCD Monitor 2. Fairlight Console Channel Control 3. Fairlight Console Channel Fader

4. Fairlight Console chassis, includes legs 5.Fairlight Console Audio Editor

6. Fairlight Console Channel Control Blank 7. Space for your mouse or notes

5Fairlight Console Components

Fairlight 2 Bay Console

The 2 bay configuration sets the Fairlight Console Channel Control module and Fairlight

Console Channel Fader module next to the Fairlight Console Audio Editor

NOTE You can arrange the Fairlight modules on either side of the audio editor and

change the position of the mouse area. For example you may be left handed and want

to have the mouse on the left side of the audio editor module. Fairlight modules are

mounted in a module bracket that can be lifted out and repositioned. Keep reading

thismanual for more information on how to install the Fairlight modules into the

modulebrackets.

A Fairlight Console Channel Rack Kit is also available from Blackmagic Design resellers

if you need to install additional devices in your console. For example Blackmagic

HyperDeck recorders or SmartScope Duo monitors.

Additionally, you can install Fairlight Console LCD Monitor Blank, Fairlight Console

Channel Control Blank, or Fairlight Console Channel Fader Blank kits.

6Fairlight Console Components

Unpacking and Assembling

Your Fairlight console is shipped in a large, strong and secure road case containing the

Fairlightconsole chassis and legs. Each Fairlight module is shipped separately. Refer to the

‘technical specifications’ section of this manual for a complete list of size and weight

measurements foreach Fairlight configuration.

After opening your Fairlight console's road case, carefully remove the console chassis and

place it gently onto a solid, stable surface strong enough to support the weight of the

chassis and legs.

NOTE Please note that an empty Fairlight 3 bay console weighs 110kg and up to 150kg

for a 5 bay console. The console is built strong and is clearly too heavy to be

unpacked by one person. You will need to make sure that all lifting is performed by

4people using the correct lifting techniques, such as bending your knees, keeping a

straight back and lifting with careful, controlled movements.

The surface your Fairlight console will be placed onto for assembly needs to be high enough

from the ground to ensure the legs are elevated when attaching to the chassis. Allow for at

least550mm. A scissor lift trolley or similar utility is the perfect solution for assembly.

7Unpacking and Assembling

Alternatively, if assembling the console with two or more people, you can stand the chassis on

its rear panel while attaching the legs and feet. Refer to the next section named 'Alternative

Assembly with Two or More People' for more details.

Tools Required

For assembly you will need the following tools:

1 x Torque wrench with

18 mm socket capable of 35 Nm.

1 x Pozidriv 2 torque driver capable

of 0.45 Nm for M3 and M4 screws.

We recommend using torque tools for tightening only, and using a regular wrench or driver

forremoving the screws.

Attaching the Legs to the Console Chassis

The road case contains two legs that attach to each side of the console chassis. When

purchasing a Fairlight console, you can choose from two separate leg designs.

Fairlight Console Leg Kit 0 degrees

This option places the console's surface level to the ground.

Fairlight Console Leg Kit 8 degrees

This option places the console at an 8 degree angle so the console leans toward the operator.

Before attaching the legs to the chassis, you should first secure the feet to each leg.

Each assembled leg weighs 8 to 10 kilograms, so please take care when lifting.

The feet are attached to the console chassis

with their length longer at one end. Ensure the

longer end is facing the front of the console.

When the 8 degrees leg kit is attached,

your Fairlight console will be slightly

higher and tilted towards you.

8Unpacking and Assembling

To attach the foot to each leg:

1 Lay the leg on its side with the cover panel facing upwards. Remove the

two M12 screws fromthe end including the small support plate.

After removing the support plate from the standard 0 degrees

leg kit, it is then used to secure the foot to the leg

NOTE If you are attaching the 8 degrees leg kit, be sure to keep the support

plate between the foot and the leg. An additional support plate is used to

secure the foot to the leg, as shown below.

2 Align the foot to the end of the leg and hold it in place. Make sure the rectangular

cutouts on the bottom of the leg and support plate are completely aligned.

3 Now place the support plate on the bottom of the foot and secure the

foot to the leg using the two M12 screws. Tighten to atorque of 35 Nm.

4 Repeat steps 1 to 3 for the second leg.

9Unpacking and Assembling

To attach the legs to the console chassis:

1 Remove the side cover from each leg by unscrewing the four M3 screws from the

opposite side of the leg using a Pozidriv 2 screwdriver.

2 Remove the four M12 leg fastening screws from each side of the console chassis.

3 Align each leg to the side of the console by mounting it against the guide pins on

the chassis.

4 Secure the legs to the chassis with the leg fastening screws and tighten the screws to

atorque of 35 Nm.

The side cover for each leg can be reattached later. Leaving the cover off at this point

of assembly provides access to the inside of the leg for when you are wiring up the

panels inside the console.

5 Carefully lower the console from the support surface and place it on the floor.

Werecommend placing the assembled chassis as close to its intended position as

possible, as once Fairlight modules are installed, the overall weight of the unit will

increase substantially. Ensure there is enough space at the rear of the chassis to

replace the back panel before securing your console into position.

10Unpacking and Assembling

Alternative Assembly with Two or More People

If you don't have access to a scissor lift trolley or similar utility and have someone tohelp you,

you can stand the chassis on its rear panel and attach the legs and feet from this position.

To assemble the legs and feet:

1 After removing the console chassis from its road case, gently lean the chassis onto its

rear panel. Ensure a second person holds the chassis in place so it does not slip.

Lean the console chassis onto its rear panel so the front is facing upwards

2 With the console chassis securely held in place, attach the legs as shown in the

previous section.

3 Attach the feet to each leg.

11Unpacking and Assembling

4 Once the legs and feet are attached, lean the chassis onto its feet into its

standing position.

Lean the Fairlight console onto its feet, ready to install the Fairlight panels

With the legs and feet attached to the console chassis, you can now install the Fairlight panels.

Installing the Fairlight Panels

The most common layout Fairlight audio engineers use for mounting the modules is to place

the Fairlight Console Audio Editor directly in front of the operator, the Fairlight Console Channel

Control and Channel Fader modules on each side, and the channel control modules above

each channel fader module. Their respective LCD monitors are installed along the top with the

monitor infill module. The small surface in between the Fairlight modules is for a mouse

or trackball.

If you don't have all the modules for a full console, you can fill in the spaces with blank panels

until you are ready to add more modules later. You can add modules any time you like and as

you need them based on your production requirements.

12Unpacking and Assembling

To install the Fairlight modules into the console chassis:

1 Remove the back panel from the chassis by unscrewing the M3 screws using

a Pozidriv 2 screwdriver, and keep the panel and screws nearby in a safe place.

Removing the back panel provides better access to the inside of the chassis

when installing the Fairlight modules.

2 Each Fairlight module has its own module bracket you can easily lift and remove

from the chassis. This lets you install modules into their brackets on a bench where

there is more space, then easily mount the assembled brackets into the chassis.

Hold each bracket arm and gently rotate the bracket up from the chassis. The bracket

hinges from the rear, allowing you to free the bracket from the chassis by pulling it

away from the hinge pin.

3 With the module bracket removed from the chassis, place it on a stable surface, ready

forattaching the Fairlight modules. We recommend installing modules starting with

the Fairlight Console LCD monitor at the top, the Fairlight Console Channel Control

module in the middle, then the Fairlight Console Channel Fader module closest to the

audio operator.

13Unpacking and Assembling

4 Secure each module to the bracket usingthe M4 Pozidriv screws supplied with your

Fairlight module. Tighten to a torque of 1.5 Nm.

5 You can now place the assembled module bracket back into the chassis by

repositioning its rear latchesover the chassis hinge pins and gently lowering the

bracket into place.

NOTE When installing a bracket with Fairlight panel modules attached, we

recommend one person holding thefront edge of the bracket, with a second

supporting the bracket from underneath the chassis as it is lowered into place.

This lets you lower the bracket gently without dropping the edge at the

finalmoment.

After installation, the brackets can be lifted again by pushing from underneath

with one hand, and lifting the front of the bracket with the other. Each bracket

has a bay lift support brace you can swing out from underneath. This lets you

safely prop the bracket away from the chassis when you need to access the

interior for cabling.

14Unpacking and Assembling

Lower the support brace by holding the brace handles and rotating the brace down from the bracket.

Allow the feet of the brace to rest inside and against the front of the chassis so it cannot move.

Attaching the Monitor Infill Module

Inside the road case, you’ll find a small cardboard box. This box contains the LCD monitor

infill module that is installed next to the Fairlight console's LCD monitors.

Remove the infill bracket from the chassis following the same procedure used for the other

module brackets.

To attach the inﬁll module:

1 Place the monitor infill module into the neck of the bracket.

2 Secure the infill module to the bracket using the supplied M4 Pozidriv screws.

Tighten to a torque of 0.45Nm.

3 Place the bracket back into the chassis.

15Unpacking and Assembling

Powering the Modules

Each Fairlight module is powered independently via its own power input. Simply plug each

module into your mains power supply using a standard IEC power cable.

We recommend using five way power boards to distribute power to the Fairlight modules, with

each power board to supply up to five modules only. Ensure the power boards are not daisy

chained and are each independently connected to mains power.

Two chassis earth points are built into the inner sides of the chassis for securing to a

building earth point. Refer to the safety information page near the end of this manual for

further information.

Connect power to each Fairlight module via its standard IEC power input

Arranging Cables and Replacing the Leg Side Covers

Your Fairlight console is designed to keep cables tidy. After connecting power cables, you can

bundle them together and guide them through the cable slots on each leg.

Once cables are in place, you can then re-install the leg side covers and tightentheir

4 x M3 Pozidriv screws to a torque of 0.35Nm.

16Unpacking and Assembling

Connecting the Fairlight Modules

After installing the Fairlight modules and plugging in power, connect each module to the other

using an Ethernet daisy chain. It doesn’t matter which particular unit is connected to the other,

as long asthey are all connected via their Ethernet ports.

If you would like to use an Ethernet switch to connect the modules, this is ok and just place

the Ethernet switch inside the console where there is lots of space. Then you can connect each

panel module to the switch directly.

Below is an example of how you could connect the Fairlight modules in a daisy chain.

Ethernet

HDMI

Computer

CONTROL ROOM STUDIO

TIP We recommend using 1.2 meter Cat6 Ethernet cables. These will allow you to

liftthe panel brackets after installation without stretching the cables.

17Unpacking and Assembling

Connecting the Fairlight Console to your Computer

Once all the modules in the console are connected together via ethernet,

connect one of them to the computer that will run DaVinci Resolve.

Connecting the Computer’s HDMI or SDI Output

The LCD monitor above the Fairlight Audio Editor connects to your computer’s HDMI monitor

output. This lets you monitor DaVinci Resolve’s Fairlight page.

This LCD monitor can also be connected to the SDI output from video playback equipment,

for example a Videohub router or Decklink video output.

You can also bundle the Ethernet and video cables together with the power cables that are

threaded through your console’s legs and feet. This keeps all cables neatly together to and

from your Fairlight console.

Reattaching the Chassis Back Panel

Now that all your Fairlight modules are installed, powered and connected, the final step to

complete the assembly of your console is to reattach the chassis’ back panel.

Secure in place using the M3 Pozidriv screws and tighten to a torque of 0.45 Nm.

This completes the assembly and connection setup for your Fairlight console. You are now

ready to confirm your console is working with DaVinci Resolve.

Configuring the Fairlight Modules

The next step is to configure your Fairlight console for your studio.

There are two Fairlight utilities that are included in the DaVinci Resolve installer. The utilities

arecalled Fairlight Panel Setup and Fairlight Studio Utility.

18Conﬁguring the Fairlight Modules

The full studio version of DaVinci Resolve can be installed from the SD card included

withyourFairlight Console, but we recommend downloading the latest version from the

Blackmagic Design Support Center at www.blackmagicdesign.com/support.

To install DaVinci Resolve, launch the DaVinci Resolve installer and follow the onscreen

prompts. Be sure to select the 'Fairlight Studio Utility' when installing DaVinci Resolve.

Fairlight Panel Setup

Fairlight Panel Setup can be connected to the Fairlight module via USB or Ethernet using DHCP.

If you are not using a DHCP server, you can set the network settings to a fixed IP address via

USB. More information for changing network settings is provided later in this manual.

When configuring the Fairlight console for your studio, the first step is to name each module

using the Fairlight Panel Setup utility. This lets you easily identify each panel module by clicking

on the 'identify this panel' checkbox.

To name each module:

1 Launch the Fairlight Panel Setup utility.

The currently selected module will be visible on the setup

utility home screen. Navigate to each installed unit by

clicking on the arrows on each side of the home screen

2 Select a module on the home screen and click on the settings icon. You can also click

on the module's image to open the settings window.

3 Click on the 'configure' tab. Under 'panel name' you will see a 'set label to' text box.

Changethe name in the text box and click 'save'. You can visually identify each module

installed in your console by clicking on the 'identify this panel' checkbox. This will

illuminate features on the module.

19Conﬁguring the Fairlight Modules

Assign a custom name for each Fairlight module using the

'configure' settings in the Fairlight Panel Setup utility

Studio Name

Name the studio this Fairlight module will be assigned to.

Network Settings

Refer to the ‘Changing Network Settings’ section for information on manually changing

these settings.

Brightness

Changes the brightness of the Fairlight module’s LCDs, or the brightness of the Fairlight

Console LCD Monitor. Drag the slider left or right to decrease or increase the brightness.

Display Source

Each Fairlight Console LCD Monitor can be set as a data display or video monitor. This means

the monitor can be set to display the Fairlight page connected via Ethernet, or a video image if

there is a signal connected to the monitor's HDMI or SDI video input.

Data display – Displays the Fairlight page.

Video monitor – Displays the SDI or HDMI video input.

If a video signal is connected to either the HDMI or SDI input, the monitor will automatically

detect which input is being used. However, if both inputs have a video signal connected, you

can manually set the desired input.

20Conﬁguring the Fairlight Modules

La pagina si sta caricando...

Blackmagic Fairlight Console Manuale utente

Blackmagic Fairlight Console Manuale utente

in altre lingue

Documenti correlati

Altri documenti