Blackmagic Design HyperDeck Studio Mini Manuale del proprietario

Installation and Operation Manual

HyperDeck

Disk Recorders

May 2018

English,

日本語, Français, Deutsch, Español,

中文, 한국어

,

Русский

,

Italiano and Türkçe.

Languages

To go directly to your preferred language, simply click on the hyperlinks listed in the

contents below.

English 3

日本語 74

Français 142

Deutsch 209

Español 279

中文 347

한국어 414

Русский 482

Italiano 551

Türkçe 619

English

Welcome

We hope you share our dream for the television industry to become a truly creative industry

by allowing anyone to have access to the highest quality video.

Our range of HyperDeck disk recorders have made it easier and more affordable than ever

to record and play back full 10 Bit uncompressed video and now Ultra HD! HyperDeck records

directly to removable 2.5" Solid State Disks (SSDs) and SD cards that are getting bigger, faster

and more affordable every day. It’s incredible that you can now record and play the most amazing

quality video onto something so small thousands of times without any degradation in quality!

SSDs and SD cards can also be connected to any computer for immediate editing and fast

transfer of your media. With no moving parts, they are unbelievably robust and can handle

harsh conditions that would destroy conventional hard drives and videotapes!

You can bypass unwanted camera compression and record directly from HDMI or SDI cameras

and even connect to any HDMI or SDI monitor for instant playback. The HyperDeck Studio Mini

model is a small and portable, modular Ultra HD disk recorder that records on tiny SD cards.

With HyperDeck Studio Pro, you can connect analog sources and also record and play back

Ultra HD with 6G-SDI. The HyperDeck Studio 12G model can record even higher frame rates

in Ultra HD up to 60 fps!

If you need longer recording times, then HyperDeck also records and plays back AppleProRes

and Avid DNx files. These 10 Bit quality codecs retain fantastic picture quality and increase the

recording length of your media by more than 5 times!

This instruction manual contains all the information you need to start using your HyperDeck disk

recorder. For uncompressed recording you need to use an SSD that supports the required data

speed and we are continually adding details on our website of new SSDs that we have tested.

Please check the support page at www.blackmagicdesign.com for the latest version of this

manual and updates to the HyperDeck software. Keeping your software up to date will always

ensure you get all the latest features. When downloading software, please register with your

information so we can keep you updated when new software is released. We are constantly

working on new features and improvements, so we would love to hear from you!

Grant Petty

CEO Blackmagic Design

Contents

HyperDeck Disk Recorders

Contents

Getting Started 5

Recording 8

Playback 11

HyperDeck Status Indicators 14

About SSDs and SD Cards 15

Blackmagic HyperDeck Setup 21

Selecting Your Video Format 22

Choosing a Codec 23

Control Panel Display Menu 26

RS-422 Control 30

Transferring Files over a Network 36

Connecting to an ATEM Switcher 38

Understanding Post Production Workflows 40

Using DaVinci Resolve 41

Importing your Clips 41

Editing your Clips 42

Trimming Clips 44

Mapping Keyboard Shortcuts 44

Adding Transitions 45

Adding Titles 46

Color Correcting your Clips 47

Using Scopes 48

Secondary Color Correction 49

Qualifying a Color 50

Adding a Power Window 50

Tracking a Window 51

Using Plugins 52

Mixing Your Audio 53

Mastering your Edit 58

Developer Information 60

Blackmagic HyperDeck Ethernet Protocol 60

Protocol Commands 60

Protocol Details 62

Help 71

Regulatory Notices and Safety Information 72

Warranty 73

Getting Started

Getting Started with Blackmagic HyperDeck

Getting started with your HyperDeck disk recorder is as easy as connecting power, plugging in

your video sources and destination equipment to your HyperDeck’s inputs and outputs and

inserting your SSDs or SD cards.

Plugging in Power

Simply plug a standard IEC cable to your HyperDeck’s power input on the rear panel.

Connect power to your HyperDeck Studio using

a standard IEC power cable

You can also power your HyperDeck Studio Mini via Ethernet by plugging into a compatible

Ethernet switch that supports PoE+, or ‘power over Ethernet plus’.

Connect power to your HyperDeck Mini using a standard IEC power cable.

Power can also be supplied via a PoE+ compatible Ethernet switch.

Plugging in Video and Audio

Plug your source video to the SDI or HDMI inputs, and your destination equipment to the

SDI or HDMI outputs.

HyperDeck Studio 12G has 12G-SDI connectors so you can input or output Ultra HD up to

2160p60 using a single BNC cable.

HyperDeck Studio Pro provides additional inputs and outputs for connecting video equipment

that supports single link, dual link or quad link Ultra HD.

POWER REMOTE

IN

SD/HD/3G/6G-SDI IN TIMECODE

IN OUT CH 1 CH 2 CH 1 CH 2

ANALOG AUDIO IN ANALOG AUDIO OUT

OUT

IN A

Y IN B-Y IN R-Y IN R-Y OUT REF IN

L

R

STEREO IN

B-Y OUTY OUT

IN B IN C IN D OUT A OUT B OUT C OUT D MON OUT

ETHERNET

PUSH PUSH

HDMI

PUSH

SD/HD/3G/6G-SDI OUT

REF OUT

REF INETHERNET PoE+

SDI OUT

SDI IN

HDMI OUT

REMOTE IN

BA

USB-C

5Getting Started

Plugging in Analog Audio and Timecode on HyperDeck Studio Pro

If you want to connect analog audio sources to HyperDeck Studio Pro, plug into the XLR or RCA

connectors. To select your desired audio input, simply press the ‘input’ button on the front

control panel to cycle through combinations of video and audio inputs. For example, SDI + XLR,

SDI + RCA, and more. External timecode can also be connected to and from your HyperDeck

Studio Pro via the timecode XLR input and output connectors.

HyperDeck Studio Pro lets you plug in external analog audio and timecode

via the rear panel XLR connectors. You can even plug in analog audio from

audio equipment such as iPods and HiFi systems via the RCA inputs.

Plugging in SSDs and SD Cards

All HyperDeck models ship ready to record immediately without having to configure any

settings. All you need is a formatted SSD or SD card.

You can easily format media via the front LCD based menu settings. You can also format using

a computer.

Refer to the ‘About SSDs and SD Cards’ section in this manual for more information on how to

format, the types of media that are best for recording video and a list of recommended drives

and cards.

To plug in an SSD:

1 Hold a 9.5mm SSD with the connection pins facing the bottom and aligned with your

HyperDeck’s drive bay. Gently push the SSD into the drive bay until you feel it slot

into place.

2 Your HyperDeck will verify the SSD. This is shown by an illuminated green light

surrounding the drive bay. When the light or indicator turns off and the ‘stop’ button

on the control panel is illuminated, your HyperDeck is ready to record.

Hold your SSD with the connection pins facing the bottom, aligned with your HyperDeck’s

drive bay and gently push the SSD into the drive bay until you feel it slot into place

POWER REMOTE

IN

SD/HD/3G/6G-SDI IN

TIMECODE

IN OUT CH 1 CH 2 CH 1 CH 2

ANALOG AUDIO IN ANALOG AUDIO OUT

OUT

IN A

Y IN B-Y IN R-Y IN R-Y OUT REF IN

L

R

STEREO IN

B-Y OUTY OUT

IN B IN C IN D OUT A OUT B OUT C OUT D MON OUT

ETHERNET

PUSH PUSH

HDMI

PUSH

SD/HD/3G/6G-SDI OUT

6Getting Started

To plug in an SD card:

1 Hold the SD card with the gold connectors facing your HyperDeck’s LCD and align it

with the media slot. Now gently push the card into the slot until you feel it lock firmly

into place.

2 Your HyperDeck will verify the SD card. This is shown by an illuminated green indicator

above the SD card slot. When the indicator turns off and the stop button on the control

panel is illuminated, your HyperDeck is ready to record.

To remove the card, gently push until you feel it click, then release. The card will eject a short

distance, allowing you to hold the edge of the card and remove it from the slot.

Gently push the SD card into the slot until you feel it click into place

Card 1

7Getting Started

Recording

Recording Ultra HD and HD video with HyperDeck

HyperDeck models that support Ultra HD video record compressed Ultra HD using Apple

ProRes, plus Avid DNxHR on HyperDeck Studio 12G and HyperDeck Studio Mini. All HyperDeck

models can record HD video using ProRes and DNxHD 220x codecs. HyperDeck Studio

models that record on SSDs can also record uncompressed HD.

Recording Video with HyperDeck Studio Mini

HyperDeck Studio Mini can record compressed HD and Ultra HD video up to 2160p30

via 6G-SDI.

To record video:

1 Insert your formatted SD card into either of the SD card slots. The indicator above the

slot will illuminate green as your HyperDeck reads the card. When the indicator turns

off, HyperDeck Studio Mini is ready to record.

2 HyperDeck Studio Mini automatically detects when SDI video is connected and

displays the image on the control panel LCD.

If you want to change the codec, you can choose from a variety of codecs using the

control panel LCD menu or the Blackmagic HyperDeck Setup utility software. For more

information, refer to the ‘control panel display menu’ section, or ‘Blackmagic HyperDeck

Setup/selecting your video format’.

3 Press the ‘record’ button and the indicator above the slot will illuminate red.

As your HyperDeck is recording, the slot indicator on the control panel LCD will

alternate between displaying the active slot, and record time remaining on the card.

4 Press the ‘stop’ button to finish recording.

The indicator above the SD card slot

illuminates red when recording video

Recording Video with HyperDeck Studio SSD Models

1 Insert your formatted SSD into either SSD slot. The LED strip surrounding the drive

will illuminate green as HyperDeck reads the disk. When the slot light turns off,

yourHyperDeck is ready to record.

2 Press the input button on the control panel to cycle through your HyperDeck’s inputs.

When your connected source is selected, it will appear on the control panel LCD.

For HyperDeck Studio Pro, pressing the input button will also cycle through

combinations of video and audio connections, for example SDI + SDI, SDI + XLR,

andSDI + RCA. This lets you record SDI or HDMI video with external audio.

01:23:47:08

2160p30

Card 2

01:23:47:08

1080p59.94 SD 2

8Recording

If you want to record using a different codec, you can choose from a variety of codecs

using the control panel LCD menu or the HyperDeck Setup utility software. See the

‘control panel display menu’ section, or ‘Blackmagic HyperDeck Setup/selecting your

video format’ section for more information.

3 Press the ‘record’ button to start recording instantly. A looping red light on the SSD slot

indicates the SSD is recording.

4 Press the ‘stop’ button to finish your recording.

On HyperDecks with SSD slots, the slot indicator

will illuminate red to show the unit is recording

TIP If HyperDeck records from a video source that contains closed caption data,

theQuickTime or MXF movie will be recorded as well as a separate .MCC file

containing the closed caption data.

Recording using Dual Media Slots

When there is less than 3 minutes of record time remaining on your SD card or SSD,

thetimecode counter on your HyperDeck’s LCD will turn red and the ‘stop’ button will

flash slowly.

This also means there is no second disk with space that recording can continue onto. In this

case, you simply need to insert a disk with space so recording can continue. Once you insert a

blank disk into the slot that’s not being used for recording, the slow flashing will stop and this

means HyperDeck can continue to record, because this second disk has been checked ok and

there is space to keep recording.

INPUT

DISP

SET

REM

JOG

01:42:56:12

SSD

2

INPUT

DISP

SET

REM

JOG

01:42:56:12

SSD

2

01:42:56:12

SSD

2

If you have less than three minutes

of recording time left on your

current disk and no formatted

media in yourHyperDeck’s second

slot, the timecode indicator will turn

red indicating your recording is

about to stop.

If there is space on a formatted

disk in the second slot, HyperDeck

will display an icon in the top right

corner to indicate that recording will

automatically switch over once the

current disk is full.

01:42:56:12

21

9Recording

If you want to change the disk you are recording to at any time, and you have a second disk that

has free space, then simply hold down the record button and the recording will move from the

current disk to the second disk. This is very useful when you want to get that disk out of the

HyperDeck without pausing recording. This can happen during live events when you need to

get an important recording out to another location, but you don’t want to miss anything and you

don’t want to stop recording.

If the ‘record’ button flashes quickly, this means the disk is not fast enough for sustained

recording. In this case, if you are recording uncompressed HD, we recommend changing to a

compressed recording format such as ProRes or DNxHD, or if you are recording compressed

video and the record button flashes quickly, try using faster recommended media.

Ref Input

If your HyperDeck has a reference input, it can accept black burst and tri-level sync signals from

a sync generator. Connect a reference source to this input if you want to synchronize

HyperDeck with other video equipment, such as a production switcher.

If your HyperDeck has a reference input, you can sync your HyperDeck with other

video equipment

Ref Output

The reference output on HyperDeck Studio Mini lets you connect an internally generated black

burst or tri-level sync signal to other video equipment if you want to synchronize other

equipment with your HyperDeck.

On HyperDeck Studio Mini you can sync other video equipment

with your HyperDeck using the reference output

REMOTE ETHERNET SD/HD/3GHD-SDI HDMI

IN OUT

REF INMON OUTOUT 2OUT 1LOOP OUTIN

INPUT

DISP

SET

REM

JOG

REMOTE ETHERNET SD/HD/3GHD-SDI HDMI

IN OUT

REF INMON OUTOUT 2OUT 1LOOP OUTIN

INPUT

DISP

SET

REM

JOG

REF OUT

REF INETHERNET PoE+

SDI OUT

SDI IN

HDMI OUT

REMOTE IN

BA

USB-C

10Recording

Playback

Playing Video with HyperDeck

1 Press the ‘play’ button once for instant playback and you’ll see your video on the LCD,

and any displays connected to your HyperDeck’s video outputs. When a clip is playing,

pressing ‘play’ again will loop it continuously. On HyperDeck Studio Mini, pressing play

a third time will let you loop all recorded clips.

NOTE With HyperDeck Studio Pro, you can choose to play back Ultra HD

using single link, dual link or quad link outputs. Refer to ‘Ultra HD Playback on

HyperDeck Studio Pro’ later in this section.

2 To skip to the next clip, press the ‘next clip’ button on the control panel.

3 Press ‘previous clip’ once to go to the start of the current clip or press twice to skip

back to the start of the previous clip.

Press the play button on your HyperDeck’s control panel to play

back a clip, and press the forward or reverse skip buttons to

restart the current clip or skip to a different one

If the play button flashes on HyperDecks that record on SSDs, this means the disk is not fast

enough and playback cannot keep up. We recommend you change to a compressed recording

format such as ProRes or DNxHD, or use a faster recommended SSD for uncompressed or

UltraHD recording.

SSD slots have rotating LEDs to show the unit is in playback mode

TIP If you play back a video clip that has an associated .MCC file, the closed caption

data will be played out with the video via the SDI output of your HyperDeck.

01:23:47:08

1080p59.94 Card 2

01:23:47:08

1080p59.94 SD 2

01:23:47:08

1080p59.94 SD 2

01:42:56:12

SSD

2

INPUT

DISP

SET

REM

JOG

01:42:56:12

SSD

2

INPUT

DISP

SET

REM

JOG

11Playback

Ultra HD Playback on HyperDeck Studio Pro

HyperDeck Studio Pro can play back Ultra HD video via single link 6G-SDI, dual link 3G-SDI,

and quad link HD-SDI.

To select your desired Ultra HD playback output:

1 Press the ‘disp’ button to open the control panel LCD menu.

2 Using the jog/shuttle wheel and ‘set’ button, select ‘video’, then ‘2160p SDI out’.

3 Select your desired output type and press ‘set’ to confirm. Press the ‘disp’ button to

close the menu.

For HyperDeck Studio Pro, you can choose between single link 6G-SDI,

dual link 3G-SDI or quad link HD-SDI for Ultra HD playback

Jog or Shuttle

You can use the jog or shuttle wheel to shuttle to a particular section at variable speeds.

The more you turn it forwards or backwards, the faster your HyperDeck Studio will play through

your video. Once you’ve found the section you want to review, press ‘play’ to resume

normal playback.

If you want to slowly jog through your video frame by frame, press the ‘jog’ button once to

enable jog operation. Turning the jog or shuttle wheel in the desired direction will then jog

through your video. Pressing the ‘jog’ button again will return the wheel to shuttle operation.

If your HyperDeck has ‘reverse’ or ‘fast forward’ buttons, you can press these buttons to play

through the clip at 2x speed. Press the ‘reverse’ or ‘fast forward’ buttons again and the speed

will increase to 4x and then 8x. Once you’ve found the section you want to review, press ‘play’

to resume normal playback.

On HyperDecks with fast forward and reverse buttons, press the buttons repeatedly

to gradually shuttle playback forwards and backwards at faster speeds

INPUT

DISP

SET

REM

JOG

2160p SDI Out

Dual 3G-SDI

Quad HD-SDI

Video In

4K SDI Out

Single 6G-SDI

INPUT

DISP

SET

REM

JOG

01:42:56:12

SSD

2

INPUT

DISP

SET

REM

JOG

01:42:56:12

SSD

2

12Playback

HDR Playback on HyperDeck Studio 12G

HyperDeck Studio 12G is capable of playing back HDR wide gamut video content. This lets you

monitor HDR video on an HDMI TV or SDI monitor. For example, you may have HDR files you

have exported from a DaVinci Resolve workstation and want to view them on a larger screen

or HDMI projector.

Your HyperDeck will automatically read the metadata in the clip file and select the

corresponding HDR output format.

While the auto setting will be successful most of the time, some files may not include the

required metadata, and this may affect how the brightest regions of your image will be

displayed. If the image does not appear as expected, you can set the correct output format

using the ‘HDR’ LCD menu.

To set the HDR output format:

1 Press the ‘menu’ button to open the LCD menu.

2 Navigate to the ‘video’ menu and select ‘HDR’.

3 Select the video clip’s corresponding HDR output format from the list. For example, if

your clip was encoded for HDR 10 using ST2084 at 2000 nits, select ST2084 (2000).

NOTE For HDR playback to work as expected, the monitor or HDMI projector connected

to your HyperDeck Studio 12G must also be capable of displaying HDR content.

The HDR output settings available are:

Auto

Auto is the default setting that will let HyperDeck automatically select the output format

that conforms to the clip’s HDR metadata.

Rec.709

For high definition video using standard dynamic range.

Rec.2020 SDR

This setting is used for Ultra HD video using standard dynamic range.

HLG

HLG stands for ‘hybrid log gamma’. This format allows HDR video to be played back on

HDR capable TVs and monitors, including those that support up to Rec.2020 SDR.

The following settings support the Rec.2020 color gamut, plus PQ, or perceptual quantizer

published as SMPTE ST2084. PQ is the function of wide gamut HDR that allows for the display

of brighter images. Luminance values in candelas per meter squared, for example 1000 cd/m

2

indicate the maximum luminance per square meter supported by the corresponding format.

ST2084 (300)

300 cd/m

2

luminance.

ST2084 (500)

500 cd/m

2

luminance.

ST2084 (800)

800 cd/m

2

luminance.

ST2084 (1000)

1000 cd/m

2

luminance.

ST2084 (2000)

2000 cd/m

2

luminance.

ST2084 (4000)

4000 cd/m

2

luminance.

13Playback

HyperDeck Status Indicators

Status Indicators

When recording or playing video with HyperDeck, any information you need to know is

displayed on the unit itself via LED indicators for each media slot and the built in LCD.

Media Slot Indicators

When you first power on HyperDeck, or any time you insert an SSD or SD card, the slot

indicator will illuminate green while checking the media and then switch off. If the disk has

not been formatted correctly, or fails to work, the slot will illuminate solid red until the disk is

removed. In this case, check if the disk is formatted correctly and also check that it works

with a computer.

HyperDeck’s media slot indicators illuminate to let you know the status of

the disk, for example red when recording, and green during playback

Control Panel LCD

HyperDeck Disk Recorders feature an LCD that not only shows your video but also displays

status information such as video format and frame rate, record, playback and jog modes, the

active media slot as well as timecode and audio levels.

HyperDecks have a built in LCD that shows your

video as well as status information

01:23:47:08

2160p30

Card 2

01:23:47:08

1080p59.94 SD 2

01:42:56:12

SSD

1

INPUT

DISP

SET

REM

JOG

14HyperDeck Status Indicators

About SSDs and SD Cards

Choosing a Fast SSD

When working with high data rate video it’s important to carefully check the SSD you would

like to use. This is because some SSDs can have up to 50% lower write speed than the

manufacturer’s claimed speed, so even though the disk specifications claim an SSD is fast

enough to handle video, in reality the disk is not fast enough for real time video recording.

Hidden data compression mostly affects recording and often these disks can still be used for

real time playback.

In our testing, we have found larger newer models of SSD and larger capacity SSDs are

generally faster. SSDs recommended for use with HyperDeck for uncompressed 10 Bit HD and

ProRes or DNxHR Ultra HD video recording include:

Brand SSD Name/Model Number Storage Supported Formats

10-bit uncompressed

HD and UltraHD

ProRes or DNxHR

HDProRes

and DNxHD

ADATA XPG SX900. ASX900S3-256GM-C. 256GB Yes Yes

Angelbird

AV Pro. 480GB Yes Yes

AV Pro. 240GB Yes Yes

Crucial

M4 (firmware 009 only). CT512M4SSD2. 512GB Yes Yes

M4 (firmware 000F only). CT256M4SSD2. 256GB No Yes

Digistor

4K Professional Video Series.

DIG-PVD1000, pre-formatted exFat.

1TB Yes Yes

Professional Video Series.

DIG-PVD480S, pre-formatted exFat.

480GB Yes Yes

Professional Video Series.

DIG-PVD240S, pre-formatted exFat

240GB Yes Yes

Intel

520 series. SSDSC2CW480A310. 480GB Yes Yes

520 series. SSDSC2CW240A310. 240GB Yes Yes

530 series. SSDSC2BW240A401. 240GB Yes Yes

530 series. SSDSC2BW180A401. 180GB Yes Yes

335 series. SSDSC2CT240A4K5. 240GB Yes Yes

Kingston

HyperX 3K. SH103S3/480G. 480GB Yes Yes

HyperX 3K. SH103S3/240G. 240GB Yes Yes

SSDNow KC300. SKC300S37A/480G. 480GB Yes Yes

SSDNow KC300.SKC300S37A/240G. 240GB Yes Yes

OCZ Agility 3. AGT3-25SAT3-240G. 240GB No Yes

15About SSDs and SD Cards

Brand SSD Name/Model Number Storage Supported Formats

10-bit uncompressed

HD and UltraHD

ProRes or DNxHR

HDProRes

and DNxHD

OWC

Mercury Extreme Pro 6G.

OWCSSD7P6G480.

480GB Yes Yes

Mercury Extreme Pro 6G.

OWCSSD7P6G240.

240GB Yes Yes

Mercury Extreme Pro 6G.

OWCSSD7P6G120.

120GB Yes Yes

Samsung

850 Pro. MZ-1T0BW, spacer required. 1TB Yes Yes

850 Pro. MZ-7KE512BW, spacer required. 512GB Yes Yes

850 Pro. MZ-7KE256BW, spacer required. 256GB Yes Yes

SanDisk

Extreme Pro. SDSSDXPS-240G-G25. 240GB Yes Yes

Extreme Pro. SDSSDXPS-480G-G25. 480GB Yes Yes

Extreme Pro. SDSSDXPS-960G-G25. 960GB Yes Yes

Extreme. SDSSDX-480G-G25. 480GB Yes Yes

Extreme. SDSSDX-240G-G25. 240GB Yes Yes

Extreme. SDSSDX-120G-G25. 120GB No Yes

PNY

Prevail. SSD9SC480GCDA-PB. 480GB Yes Yes

Prevail. SSD9SC240GCDA-PB. 240GB Yes Yes

XLR8. SSD9SC480GMDA-RB. 480GB Yes Yes

Transcend

SSD370. TS1TSSD370. 1TB Yes Yes

SSD370. TS512GSSD370. 512GB Yes Yes

SSD370. TS256GSSD370. 256GB Yes Yes

SSD720. TS256GSSD720. 256GB Yes Yes

Please visit the Blackmagic Design support center at www.blackmagicdesign.com for the

latestsupport notes and information. If you find an SSD that isn’t fast enough for uncompressed

HDvideo or Ultra HD, try a faster SSD or switch to a compressed recording format such as

ProRes or DNxHD. These recording formats have a much lower data rate and are easier for

theSSD to handle.

Choosing a fast SD Card

For high quality HD recording on HyperDeck Studio Mini, we recommend high speed UHS-II

SDcards. These cards need to be capable of write speeds above 110MB/s for recording up to

Ultra HD 2160p30. However, if you are recording standard definition or lower bit rate, lower

quality compression you might be able to use slower cards. Generally the faster the cards,

the better.

It’s worth regularly checking the latest version of this manual for more up to date information

and can always be downloaded from the Blackmagic Design website at

www.blackmagicdesign.com/support

16About SSDs and SD Cards

Brand Card Name Storage Max Read/Write Speed Supported Formats

Ultra HD

ProRes or

DNxHR

HD ProRes,

DNxHD or

H.264

Lexar Professional 2000x 64 GB 300 MB/s Yes Yes

Sandisk

Extreme Pro

128 GB 300 MB/s Yes Yes

64 GB 300 MB/s Yes Yes

32 GB 300 MB/s Yes Yes

Extreme Pro

64 GB 95 MB/s No Yes

32 GB 95 MB/s No Yes

Extreme 64 GB 90 MB/s No Yes

Extreme Plus 64 GB 90 MB/s No Yes

Formatting SSDs and SD Cards

Media used by HyperDeck must be formatted as either HFS+ or exFAT. These disk formats

allow long clips to be recorded as single files. You can easily format a card or SSD via the

format feature in HyperDeck’s LCD menu, or via a Windows or Mac OS computer.

HFS+ is also known as Mac OS Extended and is the recommended format for HyperDeck as it

supports journaling. Data on a journaled disk is more quickly recovered in the rare event it

becomes corrupted, and less likely to be corrupted in the first place. HFS+ is natively supported

by Mac OS.

ExFAT is supported natively by Mac OS and Windows without needing to purchase any

additional software. However, exFAT does not support journaling.

While navigating through the format feature on the LCD menu, you’ll have plenty of

opportunities to cancel the format and return to the previous menu by selecting the return

arrow on the bottom right of the LCD and pressing the ‘set’ button on the control panel, or by

pressing the menu button on HyperDeck Studio Mini. Always press the ‘set’ button to confirm

settings and enter setting menus.

To format using your HyperDeck:

1 Insert the media you want to format into either of the SD card or SSD slots.

2 Press the ‘disp’ or ‘menu’ button on your HyperDeck’s control panel.

3 On HyperDecks that record on SSDs, turn the jog/shuttle wheel and press the set

button to select ‘format SSD’ on the LCD menu.

On HyperDeck Studio Mini, turn the jog/shuttle wheel and use the set button to enter

the ‘record’ menu on the LCD and select ‘format card’.

Turn the jog/shuttle wheel clockwise to select ‘format

SSD’ on the LCD menu. OnHyperDeck Studio Mini,

the ‘format card’ setting is in the ‘record’ menu.

Main MenuVideo

Timecode

Setup

Format

SSD

Record

Select

Open

SET

Audio Channels

Format Card

Record Trigger

Codec

4 Channels

None

ProRes HQ

Record

17About SSDs and SD Cards

4 Select the SD card or SSD you want to format on the LCD using the jog/shuttle wheel.

Remember to press the ‘set’ button to confirm your selection.

5 Now set your desired format from the ‘HFS+’ or ‘exFAT’ options.

6 A warning message will appear on the LCD asking you to confirm the format. Make sure

you have backed up any important data before you confirm as this action cannot be

undone. Confirm the format by selecting ‘format’ for SD cards, or ‘format SSD’ using the

jog/shuttle wheel and pressing the ‘set’ button.

Set your desired format from the HFS+ or

exFAT options. On HyperDeck Studio Mini,

HFS+ is labeled ‘OS X Extended’

Confirm the format by using the jog/shuttle wheel and pressing the set button

A progress bar will show you the formatting progress. When your HyperDeck has finished

formatting, ‘formatting complete’ will display on the LCD. Press the ‘set’ button again to return

to the menu.

Formatting Media on a Mac OS Computer

The Disk Utility application included with Mac OS can format a drive in the HFS+ or exFAT

formats. Make sure you back up anything important from your disk as you will lose everything

on it when it is formatted.

To format on a Mac OS computer:

1 Connect an SSD to your computer with an external dock or cable adapter and dismiss

any message offering to use your SSD for Time Machine backups.

For SD cards, insert the card into your computer’s SD card slot, or connect it to your

computer via an external card reader.

2 Go to applications/utilities and launch Disk Utility.

3 Click on the disk icon of your SSD or SD card and then click the erase tab.

4 Set the format to Mac OS Extended (Journaled) or exFAT.

5 Type a name for the new volume and then click erase. Your media will quickly be

formatted and made ready for use with HyperDeck.

Select Format

exFat

OS X Extended

Format SSD 1

exFAT

Format

SSD 1

Format

SSD 2

HFS+

Cancel

This will erase all data from your card

This action cannot be undone.

Format SD 2 to OS X Extended?

Format

!

Format SSD 1 as HFS+?

Cancel Format SSD

This action cannot be undone.

Your disk’s contents will be erased.

18About SSDs and SD Cards

Use Disk Utility on Mac OS to erase your SSD or SD card

in the Mac OS Extended (Journaled) or exFAT format

Formatting Media on a Windows computer

The format dialog box can format a drive in the exFAT format on a Windows PC. Make sure you

back up anything important from your SSD or SD card as you will lose everything on it when it

isformatted.

To format on a Windows computer:

1 Connect an SSD to your computer with an external dock or cable adapter.

For SD cards, insert the card into your computer’s SD card slot, or connect it to your

computer via an external card reader.

2 Open the start menu or start screen and choose computer. Right-click on your

SSD or SD card.

3 From the contextual menu, choose format.

4 Set the file system to exFAT and the allocation unit size to 128 kilobytes.

5 Type a volume label, select quick format and click Start.

6 Your media will quickly be formatted and made ready for use with HyperDeck.

19About SSDs and SD Cards

Use the Format dialog box feature in Windows to format

your SSD or SD card in the exFAT format

20About SSDs and SD Cards

La pagina si sta caricando...

Blackmagic Design HyperDeck Studio Mini Manuale del proprietario

Blackmagic Design HyperDeck Studio Mini Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti

Black­magic Design HyperDeck Studio Mini Manuale del proprietario

Black­magic Design HyperDeck Studio Mini Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti

Blackmagic Design HyperDeck Studio Mini Manuale del proprietario

Blackmagic Design HyperDeck Studio Mini Manuale del proprietario