WARRANTY PROCEDURE
v1.5.2: DEC 2011
Please read the owner’s manual carefully and ensure that you have followed the correct installation and operating
procedures.
1. Please read this warranty card.
2. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
3. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for
assistance. Please ensure that you have the model number, serial number and purchase receipt ready when
you call.
Please complete the section below and keep this information for your own records.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
Authorised Service Centres in Major Australian Cities
NSW
151 Arthur Street
Homebush West, NSW 2140
Queensland
Unit 1, 320 Curtin Ave West
Eagle Farm, QLD 4009
Western Australia
Unit 2, 50 Pilbara Street
Welshpool, WA 6106
South Australia
11 McInnes Street
Ridleyton, SA 5008
Victoria
282 Normanby Road
South Melbourne, VIC 3205
Thank you for selecting a TEAC product
.
If you should require assistance with your product regarding its setup
or operation, or if any difficulties arise, please call us directly for advice
between Monday to Friday at 8.30AM – 6PM AEST at the
TEAC Customer Support Hotline
1300 553 315
WARRANTY INFORMATION
v1.5.2: DEC 2011
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure.
Warranty Terms & Conditions
1. TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with
reasonable care and skill. Maintenance and cleaning (i.e. laser head) is not covered by this warranty. The TEAC
warranty only applies to TEAC products purchased, used and serviced in Australia.
2. The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer
under a law in relation to goods or services to which the warranty relates, being the Australian Consumer Law.
3. Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been
inspected and determined to have a major failure. Refund and exchange is not applicable for change of mind.
4. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods
Table below from the date of purchase.
TEAC PRODUCT
WARRANTY PERIOD
LED/LCD TV 32” (80 cm) and above
1 Year (In-Home Service/ Pick up Available)*
All other TEAC products
1 Year (Carry-in Service)
5.
This service will only be provided as part of this warranty if all the following conditions are met;
In Home Service/Pick up* Service
a) The product is indicated in the Warranty Period Table.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to
a TEAC Authorised Service Centre.
Where In-Home service/Pick up* is not available, the purchaser is required to send the product to the nearest TEAC
Authorised Service Centre for repair. In this event, proof of purchase is required to support a warranty claim. After
the repair, the product will be available for collection by or return to the purchaser at a fee upon request. TEAC in-
home service can be made available at a fee upon request.
Carry-in Service
6. A 12-month replacement warranty is applicable to all Accessories such as Remote, Power Adaptors and Cables.
7. TEAC will ensure to the best of its abilities that all required parts are made available for any required service/repair.
8. TEAC Australia Pty Ltd and its Authorised Service Centres will use their best endeavours to complete product
repairs within a reasonable period based on available resources and workload during the time when service is
requested and performed.
9. Refurbished parts may be used to repair the product. In the case of a replacement, the product may be replaced,
with a refurbished unit of the same type or, if one is unavailable, a similar refurbished model with equal or better
features & specifications.
10. Please be advised that if the product presented for repair is capable of retaining user-generated data, the data may
be lost during servicing. Customers are strongly encouraged to back up all important information/data before
sending the product in for service/repair.
11. Service will be provided only during normal business hours and under safety conditions and circumstances. TEAC
and its authorised service agents can refuse any repair if safety, in relation to OH&S, becomes a concern to its staff
or authorised service agents’ personnel.
12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:
a) The product was not transported, installed, operated or maintained according to manufacturer instruction, or
b) The product was abused, damaged, tampered, altered or repaired by any unauthorised persons, or
c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or
incompatible external devices, exposure to abnormal conditions such as excessive temperatures or humidity, or
entry of liquids, objects or creatures into the product.
13. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with the
sale of any equipment other than as stated in this warranty and outlined above.
14. TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by
customers/retailers.
15. LCD dead pixel policy, please contact TEAC Customer Support Hotline on 1300 553 315 for assistance.
WARNING
To prevent fire or shock hazard, do not expose this appliance to water.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit
off when not in use or move it away from the affected radio tuner.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
The lightning flash and
arrowhead within the
triangle is a warning sign
alerting you of
"dangerous voltage"
inside the product.
The exclamation point within
the triangle is a warning sign
alerting you of important
instructions accompanying
the product.
WARNING : TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
DANGER
This product contains a low power laser device.
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism, designed with built-in
safeguards. Do not attempt to disassemble, refer to qualified service technician.
Exposure to this invisible laser light beam may be harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER
LIGHT BEAM EXPOSURE.
The marking plate are indicated on the bottom side of the unit.
CLASS 1 LASER
PRODUCT
CAUTION
INVISIBLE LASER
RADIATION WHEN OPEN
AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO
BEAM.
1
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:514
LOCATION OF CONTROLS
1. VOLUME KNOB
2. FUNCTION SWITCH
3. TUNING KNOB
4. PLAY / PAUSE BUTTON
5. STOP BUTTON
6. PROGRAM BUTTON
7. REPEAT BUTTON
8. NEXT SKIP / SEARCH FORWARD
BUTTON
9. BACK SKIP / SEARCH BACKWARD
BUTTON
10. DIAL SCALE
11. DIAL POINTER
12. CD DOOR OPEN POSITION
13. CD DOOR
14. CD TRACK DISPLAY
15. REPEAT INDICATOR
16. PLAY / PAUSE INDICATOR
17. FM STEREO INDICATOR
18. PROGRAM INDICATOR
19. TELESCOPIC ANTENNA
20. HANDLE
21. SPEAKER
22. BAND SWITCH
23. HEADPHONE JACK
24. AC SOCKET
25. BATTERY COMPARTMENT DOOR
26. RANDOM BUTTON
27. D.B.S. ON/OFF SWITCH
23
25
24
22
19
2
3
21
26
5
8
4
9
18
17
13
20
1
11
10
27
14
16
7
6
15
12
21
2
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:515
POWER SOURCE
BATTERY POWER OPERATION
1. Open the BATTERY COMPARTMENT DOOR by pushing the catches downwards.
2. Install 6 x C size batteries carefully according to the +/- polarity marks in the battery compartment.
3. Close the BATTERY COMPARTMENT DOOR.
AC POWER OPERATION
Connect the receptacle end of the power cable to the AC SOCKET and the plug into an AC outlet.
OPERATION OF UNIT
RADIO OPERATION
RECEPTION OF RADIO BROADCASTING
1. Set the FUNCTION SWITCH to the RADIO position. Set the desired radio band with the BAND
SWITCH.
2. Tune in a desired station by tuning the TUNING KNOB.
3. For FM reception, extend the telescopic antenna and adjust the direction, length and angle to get the
bestreception.
4. For AM reception, rotate the unit to get the best reception.
5. Adjust the VOLUME to the desired listening level.
6. To turn off the radio, set the FUNCTION SWITCH to the OFF position.
PLAYING COMPACT DISC
- Set FUNCTION SWITCH to CD position.
- Open the CD DOOR, place a CD into the compact disc compartment and close the CD DOOR. The
printed label side facing upward.
- The CD TRACK DISPLAY will show the total number of tracks after a few seconds.
- " - - " will be displayed when there is no CD inside the CD compartment.
CD-R AND CD-RW PLAYABLE
This unit can play normal audio CD, CD-R and CD-RW discs.
PLAY / PAUSE BUTTON
Press once to start playing the CD, the CD TRACK DISPLAY will show the first track and the PLAY /
PAUSE INDICATOR will light up. Press once again to stop playing the CD temporarily. The PLAY / PAUSE
INDICATOR will be flashing. Press once again to resume playing.
STOP BUTTON
Press once to stop playing the CD.
NEXT SKIP / SEARCH FORWARD BUTTON
Press once to skip to next track. Press and hold to fast forward to a desired position within the audio track.
Release the button to resume normal play.
BACK SKIP / SEARCH REWIND BUTTON
Press once to skip back to the beginning of the current track. Press repeatedly to go to previous tracks.
Press and hold to fast forward to a desired position on the audio track. Release the button to resume normal
play.
ACCESSORY LIST :
1 x AC line cord
1 x Instruction manual
3
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:516
To place a CD into the unit, open the CD DOOR and fit the CD securely into position.
To remove the CD from the unit, press the STOP BUTTON, open the CD DOOR and take out the CD.
To turn off the CD playing function, set the FUNCTION SWITCH to OFF position.
DBS ON/OFF SWITCH
When the DBS ON/OFF switch is set to the ON position, the dynamic low frequency ranges are boosted.
CD PROGRAM PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be
programmed into a playlist.
1. Press the PROGRAM BUTTON once, the PROGRAM INDICATOR and " 0 " will flash in the CD
TRACK DISPLAY.
2. Press the "BACK SKIP / SEARCH BACKWARD" and / or "NEXT SKIP / SEARCH FORWARD"
BUTTONS to select the desired track number.
3. Press the PROGRAM BUTTON again to memorise the track into the playlist.
4. Repeat steps 2 and 3 until all desired tracks are programmed.
5. Press the PLAY / PAUSE BUTTON to start playing. PROGRAM INDICATOR will light up.
6. Press the STOP BUTTON to stop programmed playback.
NOTE : Programming can only be made when the CD playing is in stop mode.
CARE AND MAINTENANCE
Caring for Compact Discs
* Treat the disc carefully. Handle the disc only by its edges. Never allow your
fingers to come in contact with unprinted side of the disc.
* Do not attach adhesive tape, stickers, etc. to the disc.
* Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
* If a disc skips or gets stuck on a section of the disc, it is probably dirty or
damaged (scratched).
* When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc.
Never wipe in circular motions.
* This unit is designed to play only Compact Discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
* Compact Discs should be stored in their cases after each use to avoid damage.
* Do not expose Compact Discs to direct sunlight, high humidity, high temperatures,
or dust, etc. Prolonged exposure or extreme temperatures can warp the disc.
REPEAT BUTTON
- Press once for single track repeat playing and the REPEAT INDICATOR will be flashing.
- Press twice for all tracks repeat playing and the REPEAT INDICATOR will light up.
- To cancel the repeat play mode, press the REPEAT BUTTON once or twice until the REPEAT
INDICATOR turn off.
RANDOM BUTTON
When playing the CD, press the RANDOM button once to enter random playing mode. All the songs will be
played in a random sequence Press the RANDOM button once more to return to normal playing mode.
RANDOM mode can not function under programmed playing mode.
4
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/6/2, ¤U¤È 03:467
Specifications
CD
Power supply : ~ 240V AC / 50Hz
6 x C size Batteries - not included)
Power consumption : 6W
Operating temperature : -10~40
° C
Frequency response : CD - 125 Hz - 15000 Hz
Distortion :
≤≤
≤≤
≤5%
Dimensions : 252 (W) x 239 (D) x 154 (H) mm
Weight (net) : 1.6 kg
Tuner
FM Frequency range : 88-108 MHz
AM Frequency range : AM 531-1602 kHz
FM noise limit sensitivity :
≤≤
≤≤
≤20
μμ
μμ
μV
FM S/N :
≥≥
≥≥
≥40dB
Accessories
AC line cord : 1
Instruction manual : 1
* Features and specifications are subject to change without notice.
* Weight and dimensions are approximate.
* All trademarks and registered trademarks are the property of their respective owners. All rights
reserved.
5
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:518
TEAC CUSTOMER SUPPORT HOTLINE (TCS)
1300 553 315
Between Monday to Friday - EST 9AM to 6PM
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:519
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
in altre lingue
- English: TEAC PCD806 User manual
Documenti correlati
-
TEAC PR301 Manuale utente
-
-
-
-
-
-
-
-
-
Tascam CD-400U Manuale utente