1
User's Guide
DVB Satellite Receiver
for mobile applications UFD 545
Order No. 260 497
2
Foreword
3
Vorwort
Dear customer,
This User's Guide is designed to help you to use the extensive functions of your
new satellite receiver most effectively.
We have made every effort to make the instructions as clear and understandable
as possible and to keep them as short as necessary. We have added a small
glossary of terms at the end of the User's Guide to facilitate understanding of
certain technical expressions that do not lend themselves to translation. And to
make sure you find what you are looking for, we have also included an index at the
back.
We wish you the very best reception and great pleasure with your new
DVB satellite receiver.
Your
KATHREIN Team
Should you, contrary to all expectations, experience problems with your receiver,
please contact your dealer or our Hotline.
Tel: #49 (0)8031/18 47 00
Fax: #49 (0)8031/18 46 76
Important information
The channel allocations of the satellites and transponders are subject to frequent
change. Consequently, in such cases, it may be necessary to readjust the channel
settings even though the channels are preset at the factory corresponding to the
latest channel allocations. You can obtain the information necessary for resetting
the channels from SAT 1 video text, the Internet or corresponding TV and satellite
magazines.
Contents
4
Inhalt
Foreword................................................................................................................................................3
Contents ................................................................................................................................................4
Safety Information..................................................................................................................................7
Important information on operation......................................................................................7
Longer periods of absence/thunderstorms ......................................................................................... 7
Mains lead....................................................................................................................................... 7
Cleaning.......................................................................................................................................... 7
Playing children................................................................................................................................ 7
Repair ............................................................................................................................................. 7
Connections..................................................................................................................................... 7
Setting-up location............................................................................................................................ 8
Ventilation........................................................................................................................................ 8
Moisture, sunlight, heat..................................................................................................................... 8
Mains voltage................................................................................................................................... 8
Earthing........................................................................................................................................... 8
Controls, Indicators, Displays and Connections....................................................................................9
Front view............................................................................................................................................9
Rear view ............................................................................................................................................9
Controls, indicators and displays on the front panel................................................................................9
Controls and connections at the rear .....................................................................................................9
Remote control function buttons..........................................................................................................10
Switching over between Remote Control Command Sets....................................................................11
Notes on Operation..............................................................................................................................12
Menu concept ....................................................................................................................................12
Button functions .................................................................................................................................12
Alphanumeric entries..........................................................................................................................12
Alphanumeric assignments of number buttons on the remote control.....................................................13
Language selection - OSD..................................................................................................................13
Connection and Startup.......................................................................................................................14
To connect the receiver ......................................................................................................................14
Sat-IF connection............................................................................................................................14
Analogue and digital TV...................................................................................................................14
Presetting of the receiving system....................................................................................................14
LNB supply voltage .........................................................................................................................15
Modulator connection......................................................................................................................15
TV and video recorder connection....................................................................................................15
Audio connection.............................................................................................................................15
Inserting batteries in the remote control ............................................................................................15
Switching on for the First Time............................................................................................................16
The first steps....................................................................................................................................16
Factory setting of the receiver.............................................................................................................16
OSD On Screen Display .......................................................................................................................17
Important on-screen displays..............................................................................................................17
TV channel identifier........................................................................................................................17
Radio channel identifier ...................................................................................................................17
Error message ................................................................................................................................17
TV channel list................................................................................................................................17
Radio channel list............................................................................................................................17
Channel selection ................................................................................................................................18
Selecting a TV channel.......................................................................................................................18
Reception status – digital.................................................................................................................18
Reception status - analogue.............................................................................................................19
Selecting a TV channel by number entry .......................................................................................19
Contents
5
Switching over to radio channel...........................................................................................................19
Selecting a radio channel by number entry ....................................................................................20
Timer Settings......................................................................................................................................21
Sound Settings ....................................................................................................................................22
Setting the volume..............................................................................................................................22
Stereo and two-channel sound reproduction ........................................................................................22
Mute...............................................................................................................................................22
Channel lists - TV/Radio.......................................................................................................................23
Selecting TV and radio channels last received.....................................................................................23
Favourite channels.............................................................................................................................23
To sort the channels...........................................................................................................................24
To delete a channel............................................................................................................................24
To add a channel ...............................................................................................................................25
To add an analogue channel...............................................................................................................26
Analogue channel lists .......................................................................................................................26
Adding/Removing Satellites.................................................................................................................27
To set up satellites .............................................................................................................................27
To enter a satellite name....................................................................................................................28
To remove satellites ...........................................................................................................................28
Current Channel Overview ..................................................................................................................29
Password.............................................................................................................................................30
Factory setting................................................................................................................................30
Entering a password........................................................................................................................30
Parental control..................................................................................................................................31
Operation from the Front Panel............................................................................................................32
Operation in exceptional cases ...........................................................................................................32
Setting System Parameters..................................................................................................................33
System parameters ............................................................................................................................33
Parental control...............................................................................................................................33
System information..........................................................................................................................33
Local time/timer...............................................................................................................................33
Timer menu ....................................................................................................................................34
Summer time ..................................................................................................................................34
TV type...........................................................................................................................................34
Picture format .................................................................................................................................34
Screen............................................................................................................................................34
A/V mode .......................................................................................................................................34
Mod.typ..........................................................................................................................................35
Mod.Ch..........................................................................................................................................35
OSD colour.....................................................................................................................................35
OSD-Trans .....................................................................................................................................35
Installation Menu..................................................................................................................................36
LNB configuration............................................................................................................................36
Oscillator frequency L.O...............................................................................................................36
Changing the oscillator frequency.................................................................................................37
Operation....................................................................................................................................37
Standby.......................................................................................................................................37
Receiving two satellites ................................................................................................................37
DiSEqC-setting............................................................................................................................38
Antenna settings .............................................................................................................................38
Satellite scan..................................................................................................................................38
TP setup/scan.................................................................................................................................39
Digital transponder.......................................................................................................................39
Analogue transponder..................................................................................................................40
DiSEqC (UFO) setup.......................................................................................................................41
Contents
6
22 kHz signal...............................................................................................................................41
Tone-burst and DiSEqC-signal......................................................................................................41
Tone burst...................................................................................................................................42
DiSEqC.......................................................................................................................................42
DiSEqC repeat.............................................................................................................................42
UFO mini.....................................................................................................................................42
Remote frequency .......................................................................................................................42
UFO micro...................................................................................................................................42
Factory setting................................................................................................................................43
Analogue Settings................................................................................................................................44
Video menu .......................................................................................................................................44
Name.............................................................................................................................................44
Frequency......................................................................................................................................44
Polarity...........................................................................................................................................44
Band ..............................................................................................................................................44
Low threshold .................................................................................................................................44
Contrast .........................................................................................................................................44
Decoder..........................................................................................................................................45
HDP mode......................................................................................................................................45
Startprog........................................................................................................................................45
Audio menu .......................................................................................................................................45
Audio mode ....................................................................................................................................45
Frequency left/right..........................................................................................................................46
Bandwidth.......................................................................................................................................46
DNR...............................................................................................................................................46
De-emphasis ..................................................................................................................................46
Video Recorder Connection.................................................................................................................47
Recording..........................................................................................................................................47
Playback ...........................................................................................................................................47
Analogue Decoder Connection............................................................................................................48
Data Transfer from Receiver to Receiver .............................................................................................49
Preparation........................................................................................................................................49
Transferring channel list ..................................................................................................................49
Transferring operating software........................................................................................................49
Technical Reference ............................................................................................................................50
Technical features..............................................................................................................................50
Technical data...................................................................................................................................51
Accessories.......................................................................................................................................52
SCART socket assignments ...............................................................................................................52
Connection examples.........................................................................................................................53
Connection arrangement 1:..............................................................................................................53
Connection arrangement 2:..............................................................................................................54
Glossary, Abbreviations....................................................................................................................... 55
Glossary of Technical Terms ...............................................................................................................56
Service.................................................................................................................................................58
Index....................................................................................................................................................59
Safety Information
7
Sicherheitshinweise
Important information on operation
In the following section you will find important information on operation, the place of
installation and connection of the receiver.
Please read this information carefully before you start up your receiver.
Longer periods of absence/thunderstorms
Always switch off the receiver with the power switch at the front left in the event of
longer periods of absence and during a thunderstorm. This also applies to any
other devices that may be connected to the receiver.
If timer programming is set make sure the receiver is switched on in good time
before the set recording time.
Mains lead
Take particular care to ensure that the power supply cable is not damaged. Never
operate the device with a defective mains lead.
Cleaning
Disconnect the receiver from the power supply before you clean it. Use a soft dry
cloth for this purpose. Only clean the surface of the casing.
Never open the casing. Contact with parts on the inside of the receiver poses a risk
of electric shock.
Playing children
Make sure that children do not insert objects into the ventilation slots. This is a
source of danger and fatal injury by electric shock, and may cause a short-circuit.
Repair
Only have qualified service personnel carry out repairs or adjustments to your
receiver. Unauthorized opening up of the receiver and attempts at repair will
invalidate the guarantee.
Unauthorized tampering with the device can jeopardize the electrical safety of the
receiver.
The manufacturer shall not be liable for accidents to the user as the result of the
receiver being opened up.
Connections
Incorrect connection can lead to problems in operation or cause defects in the
device.
Safety Information
8
Important information on setting-up location and assembly
Setting-up location
All electronic devices generate heat. The rise in temperature, however, is within a
safe range. Sensitive surfaces of furniture and veneers can over time discolour
slightly due to the constant effects of heat. The feet of the receiver may also
discolour when in contact with treated surfaces. If necessary, place the receiver on
a suitable base.
Ventilation
The heat generated in this receiver is adequately dissipated. Nevertheless, never
install the receiver in a cabinet or on a shelf with insufficient ventilation. Never
cover or close off the cooling slots on the device.
Never place objects on the receiver and maintain a minimum clearance of 10 cm
above the device to ensure the heat is carried off effectively.
Moisture, sunlight, heat
Protect the receiver from moisture, dripping and splash water.
Do not place the receiver near a source of heating and never expose it to direct
sunlight
Mains voltage
Operate the receiver only with a mains voltage of 230 V/50 Hz or connected to a
battery 12 V/24 V DC vehicle electrical system.
First connect the antenna and the television set before connecting the receiver to
the mains power supply and switching on.
Earthing
The parabolic antenna must be earthed according to instructions. Corresponding
local and/or VDE regulations must be observed.
Controls, Indicators, Displays and Connections
9
Bedienelemente, Anzeigen und Anschlüsse
In this section you will find a short description of all controls, indicators, displays
and connections. The button symbols used here are also used in the description of
the operating steps.
Front view
(panel folded down)
Rear view
Controls, indicators and displays on the
front panel
Controls and connections at the rear
1 ON/OFF switch (with mains disconnection)
2 Menu button to display and exit the menus
or submenus
3 Acknowledgement for remote control signal
4 Select button
to confirm a selection
5 Operation indicator
6 Standby indicator
7 Cursor buttons to move through menu and
channel lists as well as to set the volume
(corresponds to remote control)
8 LED display (four-digit, 7-segment display)
to show channel number and time.
9 Press catch for front panel
To open press lightly on upper right side
1 Antenna input (terrestrial)
2 Modulator output
3 Audio output
2 Cinch socket outputs, left and right
channel
4 Digital sound output (AC3) – Cinch socket
output
5 Video output (FBAS)
6 SCART socket TV connection
7 SCART socket VCR/AUX connection
8 DATA input/output socket
Interface for serial data transmission
(service)
9 Satellite IF signal input
Output of LNB supply voltage and control
signals (22 kHz and DiSEqC 1.1)
10 Satellite IF signal output
Bridged Sat-IF signal
11 Satellite IF input for analogue reception
12 Mains power input 230 V AC
13 DC voltage input 12…24 V
Digital Video Broadcasting
SELECTMENU
CARAVAN DIGITAL ANALOG RECEIVER
REMOTE
TV/SAT
STAND BY
1 2 3 4 5 6 7 8 9
1 2 3 4 5 6 7 8 9 10 11 12 13
Controls, Indicators, Displays and Connections
10
A/B
M
F L
OK
TV
Remote control function buttons
A
To switch between
remote control
settings
F
To select favorites
M
To select
main menu
L
Last channel
and exit
T
To set SCART
connection
radio OFF
- +
To set volume/
menu points
O
To confirm
submenus and menu
points
R
To turn radio ON/OFF
s
Sound selection
menu
stereo/mono
language selection
z
Channel
information
i
To select
channel list
o
u
To select channel/
submenus and menu
points
l
To switch mute
ON/OFF
1
...
0
To select
channels, parental
control,
LO frequency, etc.
e
To turn satellite
receiver ON - standby
Switching over between Remote Control Command Sets
11
g umschalten
The remote control features 2 command sets, making it possible to operate
2 receivers independently of each other in one room (not together with a twin
receiver).
Note For this purpose, program one receiver on the command set 1 and the second
receiver on the command set 2.
• Switch on receiver 1 and receiver 2 off with the power switch.
⇒ Press and hold the A button.
⇒ Enter "901" with the number buttons.
• To adopt the code, press the e button to switch receiver 1 to standby and
then switch off the device at the power switch.
• Switch on receiver 2.
⇒ Press and hold the A button.
⇒ Enter "902" with the number buttons.
• To adopt the code, press the e button to switch receiver 2 to standby and
then back into operation. Now switch on receiver 1 again.
⇒ Press and hold the A button.
⇒ Enter "903" with the number buttons.
Note When carrying out the first two settings, the remote control must be directed at the
respective receiver (when switched on).
By pressing the A button, you can now switch between the two command sets A
and B (toggle function) and alternately operate both receivers.
Command set 1 is always active as the on-delivery setting.
Note If you are operating only one receiver and the active command set is switched over
by mistake so that this receiver can no longer be operated, the remote control can
be easily switched back to command set 1 by following the procedure described
above.
Notes on Operation
12
Bedienungshinweise
Menu concept
The menu concept is based on logical operating sequences.
Note: Coloured backgrounds are used to emphasize the selected menus, submenus and
menu items as well as the parameters to be set. The menus are to a large extent
self-explanatory. You will find information relating to the selected menu point in the
information box displayed under the menu.
Press the M button to select the main
menu and press the ou buttons to
select the submenus.
Press O to access the submenus.
The items in the submenus are selected
by pressing the ou buttons.
The settings allocated to specific menu items are executed either by pressing the
-+ buttons or the number buttons.
Press L or M to exit the main menu, submenus and menu items.
Button functions
i is a changeover button (main channel list or favourite list) with menu function.
Press L to exit the setting.
T is a changeover button. Identifier self-deleting.
s is a switch-on button with menu functions. Press the button again to exit.
z is a switch-on button with menu functions. Press the button again to exit.
F is a switch-on button with menu functions. Press the button again to exit.
R is a function selection button. Press once again to change function.
l is a function selection button. Press once again to change function.
Alphanumeric entries
Use the number buttons to enter the channel and satellite names. They produce
numbers and letters in the name fields of the corresponding menus. Position the
bar cursor on the name field. The first position automatically assumes a dark
background. You can now also enter letters with the number buttons by pressing
the corresponding button several times. For example, Q, Z and — are additionally
allocated to the "1" button (see table on next page).
Notes on Operation
13
Alphanumeric assignments of number buttons on the remote control
Button 1 X 2 X 3 X 4 X
11
1 Q Z -
22
2 A B C
33
3 D E F
44
4 G H I
55
5 J K L
66
6 M N O
77
7 P R S
88
8 T U V
99
9 W X Y
00
0 SPACE
Language selection - OSD
To select the language for the on-screen menus press:
M C ou C menu language C -+ C English C M
The available languages are German, French, Italian, Spanish, Portuguese, Dutch,
Greek and Turkish.
Connection and Startup
14
Anschluss und Inbetriebnahme
The following section is specifically intended for the specialist dealer. You only
need to read this section if you are carrying out the installation yourself.
You will find sample configurations in the section "Connection examples".
First carry out all installation work before connecting the receiver to the mains
power supply.
Refer to the information provided in the section on "Safety".
To connect the receiver
Sat-IF connection
Connect the Sat-IF input of the receiver to the satellite receiving system (satellite
dish).
Use a coaxial cable with a standard F connector for this purpose.
If you need to fit the F-connector onto the cable,
• strip the cable insulation as shown in the diagram (you will need to fold back
the braid) and
• slide the F-connector onto the cable, then turn it clockwise until it locks.
When fitting the connector make sure that no wires of the shield braid make
contact with the inner conductor. This could otherwise cause a short-circuit.
The quality of the reception signal depends on a good connection!
Analogue and digital TV
To ensure you can receive digital and analogue channels, connect the IF OUTPUT
socket with the IF INPUT ANALOG socket at the rear of the receiver. Use the coax
jumper provided as an accessory for this purpose.
Make sure that your satellite antenna system transmits both the low band as well
as the high band for analogue and digital reception. For digital reception, your
single satellite antenna (dish) must be equipped with at least one universal LNB.
Presetting of the receiving system
The control signals for conventional receiving systems (satellite dishes) are preset,
i.e. 14/18 V for polarization changeover and 22 kHz switching signal for LOW/HIGH
band changeover on multifeed reception systems.
The presetting will need to be changed in the installation menu, menu point
"DiSEqC" if UFO or tone burst switching matrices are used in the receiving system.
Refer to the section "Installation menu, DiSEqC menu“ for this purpose.
It is important that you observe the application information provided for the matrix
used.
Connection and Startup
15
LNB supply voltage
If the feed system (LNB) is powered by an external supply voltage and the LNB
supply voltage is not used for switching over polarity (e.g. Kathrein feed system
UAS 330), the LNB supply of the receiver must be set to "OFF" (see section
"Installation menu, LNB configuration").
Modulator connection
If your TV set is not equipped with a SCART socket, you can connect the receiver
by means of a coaxial cable. (See "Technical reference" at the end of this User's
Guide.)
For this purpose, connect the modulator output of the receiver to the antenna input
of the TV set.
The TV set must be preset to UHF channel 38. The modulator of your receiver
"transmits" on this channel (factory setting).
Note Stereo reproduction is not possible in this configuration! And a decoder for pay-TV
cannot be connected!
To use the receiver together with a video recorder, loop through the receiver signal
via the video recorder (antenna input and output). The output channel of the video
recorder must be selected such that the receiver signal is not adversely affected
and vice versa. Refer to the corresponding information provided in the User's
Guide of your video recorder. Also refer to the connection examples at the end of
this User's Guide!
TV and video recorder connection
• Use a SCART cable to connect the satellite receiver (TV SCART) and TV set.
If your TV set is equipped for stereo output, you can receive the sound in stereo via
the SCART connection.
• Also use a SCART cable to connect the satellite receiver (VCR/AUX SCART)
and the video recorder.
Audio connection
If you wish to reproduce the sound via a HiFi system, connect a corresponding
Cinch cable from the audio Cinch sockets on the receiver to the input sockets on
your HiFi system.
If your HiFi system features a digital input or you have a digital Dolby system, you
can connect it to the digital output.
Inserting batteries in the remote control
Remove the cover on the battery compartment on the underside of the remote
control.
• Insert the two supplied batteries in the remote control. Ensure correct polarity
of the batteries, the + and – markings are indicated inside the battery
compartment.
• Slide the cover back into the casing and lock in position.
Used batteries are special waste! Therefore do not throw batteries into the
household waste but rather deposit them at a collection depot for old batteries!
Switching on for the First Time
16
Erste Inbetriebnahme
The first steps
Connect the receiver to the mains power supply or vehicle electrical system. Use
the supplied connection cable for this purpose. Never connect both cables at the
same time!
Switch on the receiver by pressing the power button at the front of the unit.
You will see "- - - -“ in the LED display.
The operation indicator LED lights red, the receiver is now in standby mode.
Switch on your TV set.
Select an AV channel number on the TV set or select channel 38 if the modulator
output is connected.
Switch on the receiver by pressing the e button on the remote control.
The orange LED at the front end of the receiver flashes every time a button on the
remote control is pressed.
You will see the first factory preset channel on your TV screen. An information bar
indicating the channel provider, the time, the timer settings, the channel status and
the channel title will be displayed in the bottom section of the screen provided the
corresponding data are transmitted. The number of the channel memory appears in
the LED display.
The red standby indicator goes out.
You can now receive the TV and radio channels preset at the factory and select
them by pressing the ou buttons. Press the R and ou buttons to
select radio channels. Press the R or T button to return to TV channels.
Refer to the section "Channel lists – TV/radio" for information on how to set up and
save other TV and radio channels.
The reception status last set always reappears when the receiver is switched on.
If the message "bad or no signal" appears on the screen in addition to an on-
screen display indicating the channel last received, you will need to check the
system installation and/or the receiver settings. If this problem only applies to
individual channel slots, the problem may be due to an interruption in the
transmission signal or a fault in the receiving system (cable or satellite system).
In this case, first check the connection configuration and then check whether the
basic settings of your receiver are correct for your system. In the case of doubt,
have a specialist do this for you.
Factory setting of the receiver
Your receiver is preprogrammed to receive the ASTRA and HotBird satellites. You
will normally need to make no further settings. To receive both satellite systems or
other satellites you will require a multifeed arrangement with at least two LNBs in
front of the satellite dish if you are not connected to a communal or party system.
Please ask your dealer.
Before you change the basic settings of your receiver, note down the settings in
the form provided at the end of this User's Guide. In this way, you will be able to
restore the original settings at any time.
OSD On-Screen Displays
17
Bildschirmeinblendungen / OSD On Screen Display
Important on-screen displays
The receiver functions are controlled by a microprocessor and extensive software.
The following explanations are intended to improve understanding of all
procedures and to minimise the risk of mistakes.
TV channel identifier
The channel identifier is displayed for
several seconds every time the channel is
changed or by pressing the O button.
The I indicates that a channel is received even if no picture can be seen (e.g.
radio). The film symbol indicates a TV channel with the selected channel shown
next to it and whether video text is received. The current time, start time and end
time of the current programme are shown on the next line provided these data are
transmitted. The + in the third line stands for the channel selection from the main
channel list. If the favourite list is selected, you will see the "apple" symbol at this
point. This is followed by the set sound reproduction mode (depending on the
direction of the symbolized sound waves, mono left, mono right or stereo can be
set, the digit indicates the number of sound channels). The channel title is shown in
the box on the right.
Radio channel identifier
The identifier for the set radio channel has
the same configuration. A music note at
the top left indicates that this is a radio
channel. Programme times and text are displayed only if the corresponding data
are transmitted with the signal.
Error message
"Bad or no signal" indicates that there is a
fault in the reception system or in the
receiver settings or the transponder is not
transmitting. Instead of the I, the channel
identifier shows a satellite antenna together with the message "bad or no signal".
Check the SAT-IF connection and the LNB configuration. As an aid, refer to the list
of service settings provided at the end of this User's Guide.
TV channel list
Press the i button to show the channel
list. A + for the main channel list or the
"apple" symbol is indicated at the top left.
The list can be changed by pressing the
button again. Information relating to the
received satellites, the polarization, the
symbol rate, scrambling, favorite or
standard channel and the parental control
is provided in the column below the
symbol. The column on the left contains
information relating to the channel, the
channel provider and whether the channel is normally scrambled. The required
channel can be selected with the bar cursor and confirmed by pressing the
O button.
Radio channel list
See above. The same applies to the radio channel list.
Channel selection
18
Programmemwahl
This section describes how you select analogue and digital TV channels with your
receiver and how you can set the required volume.
This description of the functions assumes that the receiver has been connected
correctly.
If you wish to connect the receiver yourself, please read the section "Connection
and start-up" beforehand.
Selecting a TV channel
Reception status – digital
The following information describes how to select digital reception of other
channels and shows what the on-screen displays look like.
After switching on the receiver, simply press the ou buttons in order to
select other TV channels in their ascending or descending order in the channel
memory.
Every time you press the button, an on-screen display shows you the selected
channel together with the time, the programme start and end times as well as the
channel title in the information box provided these data are transmitted together
with the signal.
By pressing the O button, you can leave
this information box permanently
displayed or switch it off by pressing
the
button once again.
You will receive the "channel scrambled"
message for scrambled channels.
A further option of selecting a different channel is to press the i button. The TV
channel list is now displayed. In the left column it will provide information relating to
the received satellites, the transponder and its transmission frequency, the
polarization, the symbol rate and the scrambling of digital channels. The right side
shows the channel number, the channel broadcaster and the type of reception
signal (analogue/digital).
By pressing the ou buttons you jump to the next channel and by pressing
the -+ buttons you jump to the neighbouring page.
Confirm your selection by pressing the
O button.
Press the L button to exit the channel
list and remain in the channel already set.
If you have now selected an analogue
channel, as confirmation, the plain white
display for this type of transmission will
appear (see below).
Channel selection
19
Reception status - analogue
You can, of course, select other channels by pressing the ou buttons while
receiving an analogue channel. The selection of analogue channels is indicated by
the information bar being displayed briefly in white, e.g.:
TV 59 DER KINDERKA STEREO
By pressing the O button, you can see
the selected channel in the same form.
Press the i button to see the channel
list indicated in white in the display. It
shows the memory location, the channel
name and the reception type "A" or "D"
(analogue or digital). By pressing the
ou buttons and the -+ buttons
you can jump to the next page in the same
way as with the digital channels.
Press the O button to select the required channel and press the L button to
exit the channel list and remain in the channel already selected.
If you have now selected a digital channel, as a confirmation, the coloured display
for this type of transmission will appear.
Selecting a TV channel by number entry
You can select a different TV channel during a current TV channel by entering the
channel location number. Use the number buttons 1 to 0 for the purpose of
entering the channel location number.
Example You wish to select the TV channel "DSF". This channel is stored under the channel
location number 015. (The order of TV channels is defined in the channel memory
and therefore only serves as an example here.)
To select this channel, press the numbers 1 and 5 one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other channels – i.e. also channels with three-
digit channel location numbers. You do not have to enter leading zeros.
Switching over to radio channel
You can switch over from a TV channel to a radio channel.
Press the R button on the remote control for this purpose.
The receiver switches over to the channel location of the radio channels last set.
You can return to the TV channel by pressing the same button or T. The
corresponding display relating to the received channel, i.e. as when selecting the
TV channels, appears on the screen. The LCD display shows a small "r" together
with the channel location number.
The screen will be blanked out after several seconds.
Channel selection
20
Reception status - radio
After switching over the receiver, simply press the ou buttons to select
other radio channels in their ascending or descending order in the channel
memory.
Every time you press the button, an on-screen display shows you the selected
channel together with the time, the programme start and end times as well as the
channel title in the information box provided these data are transmitted together
with the signal.
By pressing the O button, you can leave
this information box permanently
displayed or switch it off by pressing the
button once again.
A further option of selecting a different channel is to press the i button. The
radio channel list is now displayed. In the left column it will provide information
relating to the received satellites, the transponder and its transmission frequency,
the polarization, the symbol rate and the scrambling of digital channels. The right
side shows the channel number, the channel broadcaster and the type of reception
signal (analogue/digital). By pressing the ou buttons you jump to the next
channel and by pressing the -+ buttons you jump to the neighbouring page.
Confirm your channel selection by pressing the O button, press the L button to
exit the channel list and remain in the channel already set.
Selecting a radio channel by number entry
You can select a different radio channel during a current radio channel by entering
the channel location number. Use the number buttons 1 to 0 for the purpose
of entering the channel location number.
Example You wish to select the radio channel "DLR-Berlin". This channel is stored under the
channel location number 015. (The order of radio channels is defined in the
channel memory and therefore only serves as an example here.)
To select this channel, press the numbers 1 and 5 one after the other. The
receiver waits for about 3 seconds for entry of the next number.
Follow the same procedure for all other channels – i.e. also channels with three-
digit channel location numbers. You do not have to enter leading zeros.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
in altre lingue
- English: Kathrein UFD 545 User manual
Documenti correlati
Altri documenti
-
Silvercrest SSR 576 A1 User Manual And Service Information
-
Hitachi VTFX940EUKN Operating Instructions Manual
-
Thomson THS840 Manuale utente
-
Strong SRT 6015 Manuale utente
-
Philips DSR300/00 Manuale utente
-
Philips 58PFL9956T/12 Manuale utente
-
Philips Model Vehicle 40PFL9606 Manuale utente
-
coship CDVB6750 Manuale utente
-
Mecatronic ASR 800 1P Installation and Use Manual
-
Sharp TU-AS1G Manuale del proprietario
