Bematech MP-4000 TH Guida Rapida

MP-4000 TH

:: Printer, Impresora, Impressora

Druccker, Stapatore, Imprimante

Rev.2.3 :: Cod. - P/N 501.1181.00

3

This Quick Start Guide is a short description of the MP-4000 TH Printer and includes basic information

regarding installation and operation. For detailed information on this product, please check the User's

Manual available at our website "Support" section.

www.bematech.com

MP-4000 TH Quick Start Guide

P/N: 501.1181.00 - Rev.2.3

April 2009

(July 2007 - First edition)

No part of this publication may be copied, reproduced, adapted or translated without the prior written permission of Bematech S.A., except when allowed by patent

rights.

Information in this publication is purely informative, subjected to change without notice and no liability is assumed with respect to its use.

However, as product improvements become available, Bematech S.A. will make every effort to provide updated information for the products described in this

publication. The latest version of this manual can be obtained through Bematech website:

www.bematech.com

Notwithstanding the other exceptions contained in this Manual, the consequences and responsibility are assumed by the Purchaser of this product or third parties as a

result of: (a) intentional use for any improper, unintended or unauthorized applications of this product, including any particular purpose; (b) unauthorized

modifications, repairs, or alterations to this product; (c) use of the product without complying with Bematech S.A. Corporation’s operating and maintenance

instructions; (d) use of the product as component in systems or other applications in which the failure of this could create a situation where personal injury or material

damages may occur. In the events described above, Bematech S.A. and its officers, administrators, employees, subsidiaries, affiliates and dealers shall not be held

responsible or respond by any claim, costs, damages, losses, expenses and any other direct or indirect injury, as well as claims which alleges that Bematech S.A. was

negligent regarding the design or manufacture of the product.

Bematech S.A. shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as

original Bematech products or approved products by Bematech S.A.

Any product names or its logotypes mentioned in this publication may be trademarks of its respective owners and shall be here recognized.

Product warranties are only the ones expressly mentioned in the User’s Manual. Bematech S.A. disclaims any and all implied warranties for the product, including

but not limited to implied warranties of merchantability or fitness for a particular purpose. In addition, Bematech S.A. shall not be responsible or liable for any

special, incidental or consequential damages or lost profits or savings arising from the use of the product by the Purchaser, the User or third parties.

EMC, Safety and Other Standards Applied

WEEE

This product complies with the WEEE 2002/96/EC Directive from the European Community.

RoHS

This product complies with the RoHS 2002/95/EC Directive from the European Community.

México:

Safety: NOM-019-SCFI-1998

North America:

EMI: FCC Class A

Safety: UL 60950

Europe:

CE Marking

Safety: EN 60950

4

ENGLISH

• These item may be different depending on the product configuration.

5

ENGLISH

Installing your Printer

Unpacking

After removing the printer out of its box, verify that the following items are included:

• Printer

• Quick Start Guide

• Communication cable

• Power Supply and power cord

• Thermal Paper roll

• Spacer

Printer Description

Off / On

Power On LED

Paper

Cut

button

Paper Feed button

Info LED

switch

Cover Opening Lever

LED Indication

During printer operation, 2 LEDs are used to indicate the printer status. In case an error occurs, it

will be indicated through the Info LED. The color and number of blinks of the Info LED will

indicate the type of error. The blinks and the pauses are cyclical.

Info LED

Info

GREEN

Ready

LED Status

Ready to print

Ready to print, but near Paper End

Cover Open

No paper

Thermal printhead overheating, will print slowly,

wait to cool down

Cutter error, to recover open the cover (ERS)

Communication error / command ignored

Please refer to the User's Manual for

troubleshooting

On

Blinking

On

Blinking

2 blinks

3 blinks

4 blinks

Meaning

YELLOW

Recoverable error

RED

Unrecoverable error

Power LED

LED Status Meaning

Printer switched off

Printer switched on

(Power Supply OK)

Off

On

6

ENGLISH

Installing

Connect the DC cable of the power supply to the DC connector of the printer as shown below –

note that the arrow in the DC connector must be facing up.

Connect the communication cable to the printer and to the host system (i.e. a PC or other terminal).

To Ethernet interface installation, please consult the User's Manual available at www.bematech.com

DC Connector

Drawer Connector

Communication Port Connector

Serial DB-9

DC Connector

Drawer Connector

Communication Port Connector

USB

DC Connector

Drawer Connector

Communication Port Connector

Bi-directional parallel

DC Con nector

Drawer Connector

Communication Port Connector

Ethernet

7

ENGLISH

DC Connector

Drawer Connector

Communication Port Connector

Serial DB-25

1 - Lift cover lever

Up

3 - Close cover.2 - Drop paper

Observe paper side

as shown above.

Power supply´s

AC connector.

Make sure that the printer is turned off. Connect the power cord to the

power supply‘s AC connector and to an electrical outlet. Also make sure

that the electrical outlet is appropriately grounded.

Turn on the printer using the on / off switch located on the left side of the

printer. Check if the Power On LED is lit. The printer will initialize and

indicate the printer status ( ).

Loading Paper

To load the paper roll, lift the cover lever and open the cover as shown

below. Close the cover holding a slip of paper towards the outside of the

printer. Look if the Info LED is lit. If the Info LED is green, your printer is

ready to use.

8

ENGLISH

Paper width adjustment

To change the paper width simply pull the spacer and insert it in the new paper

width position, as shown below.

The printer must also be programmed to print only in the new paper width.

Please refer to the User's Manual for further details.

The spacer can be used to adjust the roll with widths from 2 up to 3 and a quarter of an inch.

Adjusted for 58mm

Spacer

82.5mm: No Spacer

Adjusted for 76mm

Adjusted for 80mm

9

ENGLISH

Self-testing and Help summary

To run a self-test, turn off the printer, press and hold the Paper Feed button and switch the printer on.

When the printer starts printing, release the Feed button. A message will be printed asking you to wait

for the self-test, choose the Configuration Mode or enter in Data Dump Mode. After the self-test the

printer returns to the “Ready” status (green Info LED).

For a Help summary, turn off the printer and turn the printer on while keeping the Cut button pressed.

Usage Environment

The MP-4000 TH should operate placed on a plain and stable surface. Keep the printer unobstructed -

especially the paper exit.

Do not hold or pull the receipts which are being printed.

This product is designed for indoor applications. Avoid using it in environments with high

humidity, subject to dust or intense heat.

CAUTION !

This printer can support different drawer models with a jumper configuration. Please refer to the

User’s Manual before connecting your cash drawer to the printer. Some drawer models may

damage the printer when connected with a wrong jumper configuration.

Drawer Activation

10

ENGLISH

Drivers:

This package installs the Windows API driver, Manuals, User Software, Printer and the Spooler

driver.

?DO NOT connect your printer prior to installing the drivers.

1. Run the file (BemaSetupMP4K.exe).

2. Select the installation wizard language and press OK.

3. Read the initial instructions on the Welcome Window and press NEXT.

4. The wizard will automatically install the drivers and system libraries.

5. Select the printer Interface and the port and configuration depending on the chosen interface. For

Ethernet, fill in the printer IP address. Press INSTALL.

6. Connect your MP-4000 TH to the installed port in your PC, make sure that it is turned on and with

paper loaded.

7. Select whether you wish to print a test page or not.

The default spooler driver configurations are:

1. regular (non-scalable)

2. 76mm (3in) / 30cm (11.8in) print width / page length

To change the printer properties you may right click on the MP-4000 TH icon under START\Printers

and Faxes and launch the properties menu.

External cleaning:

Clean the external cabinet with a soft cloth, moistened in water or neutral detergent. Never use a

tow chemically treated or chemical substances like alcohol or similar solvent. The use of these

products can make the cabinet of the printer changes its color or be deformed.

11

ENGLISH

Esta Guía Referencia Rápida es una descripción corta de la impresora MP-4000 TH e incluye la

información básica con respecto la instalación y a la operación. Para saber si hay información detallada

sobre este producto, comprobar por favor el manual de usuario disponible en nuestra sección de la

“ayuda” del Web site.

www.bematech.com/es

MP-4000 TH Guía de Referencia Rapida

P/N: 501.1181.00 - Revisión 2.3

Abril de 2009

(Julio de 2007 - Primera edición)

Ninguna parte de esta publicación puede ser copiada, reproducida, adaptada o traducida sin la previa autorización escrita de Bematech S.A., excepto cuando

permitido por derechos de patente.

Los datos de esta publicación son puramente informativos, sujetos a cambios sin previo aviso y no se asume responsabilidad con respecto al uso de estos. Sin

embargo, a medida que estén disponibles mejorías en el producto, Bematech S.A. dedicará todos sus esfuerzos para suministrar informaciones actualizadas de los

productos descriptos en esta publicación. La versión más reciente de este Manual puede ser obtenida a través del sitio de Internet de Bematech:

www.bematech.com/es

No obstante las otras excepciones contenidas en este Manual, las consecuencias y la responsabilidades son asumidas por el Comprador de este producto o terceras

personas como resultado de: (a) uso intencional para cualquier aplicacion impropia, no intencional o no autorizada de este producto, incluyendo cualquier

propósito específico; (b) modificaciones no autorizadas, reparaciones o alteraciones de este producto; (c) uso del producto sin cumplir las instrucciones

operacionales y de mantenimiento de la empresa Bematech S.A.; (d) uso del producto como componente en sistemas u otras aplicaciones en las cuales la falla de

éste podría crear una situación donde podrían ocurrir heridas personales o daños materiales. En los eventos mencionados anteriormente, Bematech S.A. y sus

representantes legales, administradores, empleados, subsidiarias, afiliadas y distribuidores no serán considerados responsables o responderán por cualquier

reclamo, costos, daños, pérdidas, gastos y cualquier otro perjuicio directo o indirecto, así como también por reclamaciones en las cuales se alegue que Bematech

S.A. fue negligente con respecto al diseño o a la manufactura del producto.

Bematech S.A. no será responsable por cualquier daño o problema resultante del uso de cualquier opcione o cualquier producto consumibe fuera de aquellos

designados como productos originales Bematech o productos aprobados por Bematech S.A.

Las garantías del producto son solamente aquellas mencionadas expresamente en el Manual del Usuario. Bematech S.A. rechaza cualquier y todas las garantías

implícitas del producto, incluyendo, pero no limitándose, a garantías implícitas de comercialización o adaptación para una finalidad específica. Adicionalmente,

Bematech S.A. no será responsable o pasible por cualquier daño, lucro o ahorros perdidos, sean especiales, accidentales o consecuentes, resultantes del uso del

producto por el Comprador, el Usuario o terceras personas.

EMC and Safety Standards Applied

WEEE

Este producto esta en conformidad con las directivas de la regla WEEE 2002/96/EC Directiva de la Comunidad Europea.

RoHS

Este producto esta en conformidad con las directivas de la regla ROHS 2002/95/EC Directiva de la Comunidad Europea.

México:

Safety: NOM-019-SCFI-1998

North America:

EMI: FCC Class A

Safety: UL 60950

Europe:

CE Marking

Safety: EN 60950

12

ESPAÑOL

Instalando su Impresora

Desembalando

Después de sacar la impresora de su caja verificar que se incluyeron los siguientes ítems:

• Impresora

• Guía de Referencia Rápida

• Cable de Comunicación

• Fuente y Cable de Poder

• Rollo de Papel Térmico

• Espaciador

•S ítems pu Estoeden ser diferentes dependiendo de la configuración del producto.

13

ESPAÑOL

Printer Description

Encendido LED

Botón de Corte de Papel

Botón de Alimentación de Papel

Info LED

Apagado / Encendido

Palanca de Apertura de la Cubierta

Indicación LED

Dos luces LED indican el estatus de la impresora cuando está funcionando. La luz Info LED indicará

cuando un error haya ocurrido. La luz Info LED indicará el tipo de error por medio del color y

cantidad de parpadeos. Los parpadeos y las pausas son cíclicos.

LED Info

Info

VERDE

Lista

Apariencia

Lista para imprimir

Listo para imprimir pero papel por acabar

Cubierta abierta

Sin papel

El cabezal de la impresora está recalentando, imprimirá

lentamente, espere para permitir el enfriamiento

Error del cortador, abra la cubierta para recuperar (ERS)

Error de comunicación / comando ignorado

Favor de consultar el Manual del Usuario para un diag-

nóstico del problema

On

Parpadeando

On

Parpadeando

2 parpadeos

3 parpadeos

4 parpadeos

Significado

AMARILLO

Error recuperable

ROJO

Error No-recuperable

LED de Encendido

Apariencia Significado

Impresora desconectada

Impresora conectada

(Suministro eléctrico OK)

Off

On

14

ESPAÑOL

Instalando

Conecte el cable DC de la fuente de poder al conector DC de la impresora, tal como se muestra

abajo – tome nota que la flecha del conector DC debe de estar orientada hacia arriba.

Conecte el cable de comunicación a la impresora y al sistema anfitrión (p. ej. una computadora u otro

terminal).

Para instalación de la interfaz Ethernet, consulte el Manual de usuario disponible en el sitio

www.bematech.com

Conector DC

Conector Cajón