Tally Dascom DM-310 Manuale utente

Categoria
Stampanti a matrice di punti
Tipo
Manuale utente

Questo manuale è adatto anche per

User Guide DM-310/320 Dot Matrix Printer
Tally Dascom DM-310/320 User Guide V1.0
Important Safety Instructions (English)
Read the following instructions thoroughly before starting up your printer.
The device and mains-socket must all times be easily accessible.
Never carry out maintenance or repair work yourself. Always contact a qualified service
technician.
Keep this user guide in a place which is easily accessible at all times.
Place the printer on a solid and even base so that it cannot fall.
Never place the printer in the vicinity of inflammable gas or explosive substances.
Ensure the printer is connected to a socket with the correct voltage.
Always disconnect the printer from the power before opening the device to perform
maintenance work or remedy errors.
Do not expose the printer to high temperatures, direct sunlight or dust.
Keep all liquids away from the printer.
Protect the printer from shock, impact and vibration.
Make sure that both the printer and the computer are switched off before connecting the data
cable.
The print head will become very hot during printing; avoid contact with the print head after
printing has finished.
Do not perform any operation or action in any way other than those provided in this manual.
When in doubt, contact your dealer or your customer support.
Tally Dascom DM-310/320 User Guide V1.0
Wichtige Sicherheitshinweise (German)
Lesen Sie bitte diese Sicherheitshinweise durch, bevor Sie den Drucker in Betrieb nehmen.
Das Gerät und die Netzsteckdose müssen jeder Zeit leicht zugänglich sein.
Führen Sie Wartungsarbeiten und Reparaturen keinesfalls selbst aus, sondern verständigen Sie
immer einen qualifizierten Servicetechniker.
Bewahren Sie diese Dokumentation an einem jederzeit zugänglichen Ort auf.
Den Drucker auf stabilem und ebenem Untergrund so aufstellen, dass er nicht zu Boden fallen
kann.
Stellen Sie den Drucker keinesfalls in der Nähe von leicht entzündlichen Gasen oder explosiven
Stoffen auf.
Den Drucker nur an eine Steckdose mit der richtigen Spannung anschließen.
Wenn Sie den Drucker vom Netz trennen wollen, den Drucker ausschalten und immer den
Netzstecker an der Steckdose ziehen.
Den Drucker weder hohen Temperaturen noch direktem Sonnenlicht und Staub aussetzen.
Keine Flüssigkeiten mit dem Drucker in Berührung bringen.
Den Drucker keinen Erschütterungen, Stößen oder Vibrationen aussetzen.
Sicherstellen, dass der Drucker und der Computer ausgeschaltet sind, bevor das Datenkabel
angeschlossen wird.
Der Druckkopf wird während des Druckens heiß. Vor dem Berühren deshalb einige Zeit abkühlen
lassen.
Weichen Sie bei der Bedienung des Druckers nicht von den Anweisungen in der Dokumentation
ab. Bei Unklarheiten wenden Sie sich bitte an Ihren Händler oder Ihren Kundendienst.
Tally Dascom DM-310/320 User Guide V1.0
Consignes importantes de sécurité (French)
Lire attentivement les instructions suivantes avant de mettre l’imprimante en service.
Le dispositif et la prise principale doivent toujours être accessibles facilement.
Ne jamais effectuer soi-même les travaux d’entretien et de réparations. Contacter toujours un
dépanneur qualifié.
Placer l’imprimante sur un support stable de fon à ce qu’elle ne puisse pas tomber.
Ne jamais placer l’imprimante à proximité de sources de gaz aisément inflammables ou de
substances explosives.
Ne connecter l’imprimante à une prise que lorsque la tension est correcte.
Pour déconnecter l’imprimante de l’alimentation principale, mettre l’imprimante hors tension et
toujours débrancher le connecteur secteur de la prise murale.
Ne pas exposer l’imprimante à des températures élevées, à la lumière directe du soleil ou à la
poussière.
Ne pas mettre l’imprimante en contact avec des liquides.
Ne pas exposer l’imprimante à des chocs, impacts ou vibrations.
Sassurer que l’imprimante et l’ordinateur sont hors tension avant de connecter le câble de
données.
La tête d’impression est brûlante pendant l’impression. Cest pourquoi laissez-la refroidir
quelques instants avant d’y toucher.
N'exécutez aucune opération ni action d'une autre manière que celle indiquée dans ce manuel.
En cas de doute, veuillez contacter votre distributeur ou service après-vente.
Tally Dascom DM-310/320 User Guide V1.0
Indicazioni di sicurezza importanti (Italian)
Prima di mettere in funzione la stampante, leggere attentamente le seguenti indicazioni.
Il dispositivo e la presa di corrente devono essere sempre facilmente accessibili.
Non eseguire mai da sé gli interventi di manutenzione e riparazione, ma rivolgersi sempre a un
tecnico di assistenza qualificato.
Conservare le presenti istruzioni per l’uso in un luogo sempre accessibile.
Collocare la stampante su una superficie stabile, per evitare che cada a terra.
Non collocare la stampante in prossimità di gas facilmente infiammabili o di sostanze esplosive.
Collegare la stampante a una presa di corrente con tensione adeguata.
Per scollegare la stampante dalla rete di alimentazione, spegnere la stampante e disinserire
sempre il connettore di rete dalla presa.
Non esporre la stampante ad elevate temperature né alla luce solare diretta e alla polvere.
Evitare il contatto della stampante con liquidi.
Non esporre la stampante a colpi, scosse o vibrazioni.
Verificare che la stampante e il computer siano spenti prima di collegare il cavo di trasmissione
dati.
Durante la stampa, la testina si surriscal-da notevolmente. Prima di toccarla, se necessario
opportuno quindi lasciarla raffreddare qualche istante.
Non eseguire alcuna operazione o azione se non nella maniera descritta nel presente manuale.
In caso di dubbio, contattare il rivenditore o dalla società incaricata dell’assistenza.
Tally Dascom DM-310/320 User Guide V1.0
Instrucciones de seguridad importantes (Spanish)
Lea las siguientes instrucciones con esmero antes de poner la impresora en servicio.
El dispositivo y la toma de corriente deben estar ubicados de forma que sea fácil acceder a ellos.
Nunca lleve a cabo trabajos de mantenimiento o reparación Ud. mismo, sino consulte a un
técnico de servicio calificado.
Guarde las presentes instrucciones de servicio en un lugar de fácil acceso en cualquier momento.
Ponga la impresora sobre un base estable de manera que no pueda caer al suelo.
Nunca coloque la impresora en la vecindad de gases de fácil inflamabilidad o sunstancias
explosivas.
Asegure conectar la impresora sólo a un enchufe con un voltaje correcto.
Cuando quiera desconectar la impresora de la red, apague la impresora y siempre tire la clavija
de alimentación del enchufe.
No exponga la impresora a temperaturas altas, a la luz solar directa y al polvo.
No ponga la impresora en contacto con fluidos.
Nunca exponga la impresora a sacudidas, choques o vibraciones.
Asegúrese de que la impresora y el ordenador estén apagdos antes de conectar el cable de
datos.
La cabeza de impresión se pone muy caliente durante la impresión. Por lo tanto, deje enfriarlo
algún tiempo antes de tocarla.
No permita que se realice cualquier operacn o acción de una forma diferente a lo que se señala
en el manual. En caso de duda, póngase en contacto con su comerciante o con su servicio post-
venta.
Tally Dascom DM-310/320 User Guide V1.0
Правила по технике безопасности. (Russian)
Прочитайте, пожалуйста, инструкцию по технике безопасности перед включением в работу
принтера.
Устройство и розетка должны быть всегда легко доступна.
Не выполняйте технические работы и ремонт техники самостоятельно, но сообщайте о
неисправностях квалифицированным сервисным техникам.
Данная инструкция должна быть всегда доступна каждому пользователю.
Установите принтер на ровном и стабильном месте так, чтобы он не смог упасть на пол.
Ни в коем случае не ставьте принтер вблизи легко воспламеняющихся газов и взрывчатых
веществ.
Включайте принтер в розетку только с соответствующим напряжением.
Если Вы хотите отключить принтер от напряжения, сначала выключите принтер сам и затем
выньте штекер из розетки.
Берегите принтер от нагревания, от попадания на него прямых солнечных лучей и пыли.
Не допускайте попадания жидкости на принтер.
Нельзя подвергать принтер тряске, ударам и вибрации.
Убедитесь, что принтер и компьютер выключены, только после этого соедините принтер с
компьютером.
Печатающая головка нагревается во время работы принтера. Поэтому подождите какое-то
время, прежде чем дотронуться до нее.
Пользуйтесь принтером так, как это написано в документации. Если у Вас возникают
неясности, обращайтесь с вопросами к Вашим продавцам или в сервисный центр.
Tally Dascom DM-310/320 User Guide V1.0
Instruções Importantes sobre Seguraa (Portuguese)
Leia as instruções de segurança antes de usar a impressora.
A impressora e a tomada devem ser facilmente em todos os momentos acessíveis.
Consulte sempre um técnico qualificado para executar uma reparão .
Coloque a impressora sobre uma base sólida e nivelada, para que ela não sofra quedas.
Jamais instale a impressora nas proximidades de lugares onde haja gás inflamável ou substâncias
explosivas.
Assegure-se de conectar a impressora à tomada elétrica com a voltagem apro-priada.
Quando desligar a impressora da rede, desligue sempre a impressora e retire o cabo da tomada.
Não exponha a impressora a temperaturas altas ou luz solar direta.
Não aproxime substâncias líquidas da impressora.
Proteja a impressora de choques, impactos e vibrações.
Desligue a impressora e o computador antes de conectar o cabo da rede.
A cabeça da impressora pode ficar muito quente . Portanto, espere algum tempo antes de tocá-
la.
o fa nenhuma operação ou ação além das recomendadas neste manual. Em caso de vida,
contate seu revendedor ou companhia de servo.
Tally Dascom DM-310/320 User Guide V1.0
Önemli Güvenlik Talimatları (Turkish)
Lütfen, yazıcıyı işletime geçirmeden önce bu güvenlik talimatlarını nüyle dikkatle okuyun.
Cihaz ve elektrik prizinin her zaman kolayca erişilebilir olması gerekir.
Bakım ve tamir çalışmalarını kesinlikle ve hiçbir surette kendi başınıza yapmayın; her zaman
kalifiye bir uzman servis-teknisyenine haber verin.
Yazıcıyı, üzerinden yere düşmesi mkün olmayacak sabit ve z bir zemine yerleştirin.
Yazıcıyı kesinlikle ve hiçbir surette kolayca yanabilecek gaz veya patlayıcı maddeler içeren
nesnelerin yakınına koymayın.
Yazıcı akım kablosunu sadece doğru gerilime sahip bir prize takın.
Yazıcıyı şebeke ağından ayırmak istediğinizde, yazıcıyı kapatın ve ağ-fişini her zaman prizden
çıkartın.
Yazıcıyı ne yüksek ısılı ne de doğrudan güneş ışığına ve toza mâruz kalan mekânlarda bulundurun.
Yazıcı hiçbir sıvı maddeyle temasta olmamalıdır.
Yazıcı hiçbir sarsıntıya, darbeye veya titreşime mâruz kalmamalıdır.
Veri kablosu bağlanmadan önce hem yazıcının hem de bilgisayarın kapalı olduklarından emin
olmalısınız.
Yazıcının başı basma esnasında yüksek ısıya ulaşıyor. Bu yüzden lütfen dokunmadan önce kısa
re soğumasını bekleyin.
Yazıcının işletimi ve kullanımında bu dokümantasyondaki talimatların hiç dışına çıkmayın. Sorunlu
nen hususlarda tfen imâlatçınıza veya müşteri hizmetleri servisinize başvurun.
Tally Dascom DM-310/320 User Guide V1.0
TRADEMARK ACKNOWLEDGEMENTS
“IBM” is a trademark of International Business Machines Corporation.
“EPSON” is a trademark of Epson America Incorporated.
“DEC” is a trademark of Digital Equipment Corporation.
“Centronics” is a trademark of Centronics Data Computer Corporation.
“DOS” is a trademark of Microsoft Corporation.
“SAPis a trademark of SAP AG.
“Windows”, “Windows 7”,”Windows 8”, “Windows 95”, “Windows 98“, “Windows NT”, “Windows
2000”, “Windows 2003/2008/2013 Server”, “Windows XP” and “Windows Vista” are trademarks of
Microsoft Corporation.
All other product names and company names appearing in this manual are the registered
trademarks or trademarks of the individual companies.
Tally Dascom DM-310/320 User Guide V1.0
About This Manual
This manual provides information to operators of the DM-310/320 to describe basic operations to
enable safe and correct use of the printer.
Symbols Description
The symbols in this manual are identified by their level of importance, as defined below. Read the
following carefully before handling the product.
CAUTION: Provides information that must be observed to prevent damage to
the equipment or loss of date.
NOTE: Advises you of information that is essential to complete a task.
Related Software and Documents
Related Software and Documents
Document name
Description
DM-310/320 User Manual
This manual.
DM-310/320 Maintenance Manual
This manual provides developer/ engineers
with all the necessary information.
DM-310/320 Programming Guide
This provides description in Acrobat format of
the commands used by each DM printer, along
with sample programs and other information
about the printer
Software
Utility
DM-310/320 Printer Driver (Windows)
DM-310/320 Utility (Windows)
Tally Dascom DM-310/320 User Guide V1.0
TABLE OF CONTENTS
About This Manual ......................................................................................................................X
Related Software and Documents ...............................................................................................X
1 INTRODUCTION ........................................................................................................................13
1.1 Features ............................................................................................................................... 13
1.2 Printer Specification ............................................................................................................. 14
1.3 Ribbon Cassette Specification ............................................................................................... 16
1.4 Paper Specification ............................................................................................................... 16
1.5 External Dimension and Mass ............................................................................................... 18
1.6 Unpacking ............................................................................................................................ 19
1.7 Product Configurations ......................................................................................................... 21
1.8 Part Names and Functions .................................................................................................... 22
1.9 Contral Panel ........................................................................................................................ 23
1.9.1 Power Switch .................................................................................................................. 23
1.9.2 LEDs ............................................................................................................................... 23
1.9.3 Feed Key ......................................................................................................................... 24
2 SETUP ...................................................................................................................................25
2.1 Flow of Setup ..................................................................................................................... 25
2.2 Installing the Printer .............................................................................................................. 26
2.3 Attaching Power .................................................................................................................... 27
2.4 Adjusting Paper Near-end Sensor .......................................................................................... 28
2.5 Loading Ribbon Cassette ....................................................................................................... 29
2.6 Loading Paper Roll ................................................................................................................ 30
2.7 CONNECTING TO COMPUTER ................................................................................................ 33
2.7.1 Connecting USB interface ................................................................................................ 34
2.7.2 Connecting Cashdrawer Interface .................................................................................... 34
2.7.3 Connecting Serial Interface.............................................................................................. 35
2.7.4 Connecting Parallel Interface ........................................................................................... 36
2.7.5 Connecting Ethernet Interface ......................................................................................... 36
2.7.6 Connecting Wi-FI Interface .............................................................................................. 37
2.7.7 Connecting Bluetooth ..................................................................................................... 37
3 NETWORK SETUP AND CONFIGURATION ..................................................................................38
3.1 Installing Windows Driver ...................................................................................................... 38
3.2 Installing Setup Tool .............................................................................................................. 41
3.3 Setup Tool Application........................................................................................................... 45
3.3.1 Model and Interface Setting ........................................................................................... 45
3.3.2 Configuring the Printer .................................................................................................... 46
3.4 Installing Bluetooth Adapter Driver........................................................................................ 48
3.5 Update Firmware .................................................................................................................. 55
4 SETTING/CHECKING MODES .....................................................................................................58
4.1 Print a Parameter Setting Page (Self-test Page) ...................................................................... 58
4.2 Verticle Alignment Mode....................................................................................................... 60
Tally Dascom DM-310/320 User Guide V1.0
4.3 Hexadecimal Dumping Mode................................................................................................. 60
5 TROUBLESHOOTING AND MAINTENANCE .................................................................................62
5.1 Error Indicator Cable ............................................................................................................. 62
5.2 Trouble Shooting ................................................................................................................... 63
5.3 Clear a Paper Jam.................................................................................................................. 64
5.4 Maintenance ........................................................................................................................ 65
6 COMMUNICATION INTERFACE SPECIFICATIONS ........................................................................66
6.1 USB interface ........................................................................................................................ 66
6.2 Cash Drawer interface ........................................................................................................... 66
6.3 Wi-Fi interface ...................................................................................................................... 66
6.4 Bluetooth Interface ............................................................................................................... 67
6.5 Ethernet interface ................................................................................................................. 67
6.6 Serial interface ...................................................................................................................... 67
6.7 Parallel interface ................................................................................................................... 68
6.8 Power Supply ........................................................................................................................ 69
7 CHARACTER CODE PAGES ..........................................................................................................70
7.1 Common to all pages (International Character Set: USA) ........................................................ 70
7.2 International Character Sets .................................................................................................. 71
7.3 [User-defined page] .............................................................................................................. 72
7.4 [PC437: USA, Standard Europe] ............................................................................................. 73
7.5 [PC850: Multilingual] ............................................................................................................ 74
7.6 [PC860: Portuguese] ............................................................................................................. 75
7.7 [PC863: Canadian French] ..................................................................................................... 76
7.8 [PC860: Portuguese] ............................................................................................................. 77
7.9 [PC863: Canadian French] ..................................................................................................... 78
7.10 [PC865: Nordic] ................................................................................................................... 79
7.11 [PC858: Euro] ...................................................................................................................... 80
7.12 [PC866: Cyrillic #2] .............................................................................................................. 81
7.13 [PC737: Greek] .................................................................................................................... 82
7.14 [PC857: Turkish] .................................................................................................................. 83
7.15 [PC864: Arabic] ................................................................................................................... 84
7.16 [PC862: Hebrew] ................................................................................................................. 85
8 COMMAND SETS.......................................................................................................................86
8.1 ESC/POS Command Sets ........................................................................................................ 86
FCC STATEMENT...........................................................................................................................88
DASCOM REPRESENTATIVES ........................................................................................................89
Tally Dascom DM-310/320 User Guide V1.0
13
1 INTRODUCTION
The Dascom® DM-310/320 is ideally suited for point of sale applications that require color or
monochromatic one, two, or three-ply receipts. This robust, impact printer features the latest
technological advances including; drop-in paper loading, compact design, logic seeking head, built-in
programmable buzzer, and ESC/POS compatibility. The DM-310/320 is available in two models;
standard, and auto-cutter. All models are powered by an external AC adapter and feature user-
replaceable interface boards (serial, parallel, USB, Ethernet, Wi-Fi, and Bluetooth). The DM-310/320
can also be wall-mounted and is ideal for kitchen slips, delivery slips, coupons, tickets, receipts, or daily
reports.
1.1 Features
High-speed, up tp 5 lines/sec
High resolution printout, 160*144 dpi
two-color printing
Logic-seeking control
Drop-in paper loading, easy to load media
Selectable paper widths
One, two, or three ply receipts
Wide range of connectivity. The USB interface is standard interface. Serial/parallel/Ethernet/
Wi-Fi/ Bluetooth are optional interfaces. Various interface choices suit all needs.
This user guide provides all the information you need to operate your printer on a daily basis.
Tally Dascom DM-310/320 User Guide V1.0
14
1.2 Printer Specification
Print Parameter
Printing mode
Serial impact dot matrix
Printing
direction
Bi-directional
Head pins
9 pins (Pin 0.30mm)
Resolution
max 160dpiH x 144dpiV
Print speed
5.0 lines/sec
Print width
63.5mm(40 columns/ 400 half dots/ 200 full dots)
57.2mm(36 columns/ 360 half dots/ 180 full dots)
47.6mm(30 columns/ 300 half dots/ 150 full dots)
Ribbon
Colors
Single color (black), two color (black and red)
Life
Black: approx. 3 million characters (continuous printing at 25)
Black and red: black 1.5 million characters, red 750,000 characters
(continuous printing at 25)
Paper
Paper type
Good quality normal white roll paper
Paper width
76.2±0.5mm/ 69.5±0.5mm/ 57.5±0.5mm
Paper thickness
Without cutter: total thickness 0.06mm ~ 0.2mm
With cutter: total thickness 0.06mm ~ 0.18mm
Paper roll
diameter
83 mm dia. (3.25 inches) or less
(internal diameter of the paper roll core must be 10 +2/-0 mm (0.394
+0.078/-0 inches))
Paper load
Upward cover open and Easy paper loading
Paper cut
DM-310: manual tear
DM-320: manual tear and auto cutter (full cut/partial cut)
Copies
1+2
Paper Feed
Friction feed
Paper feed speed 40 lines / sec (6LPI)
Memory
Flash
32 Mbytes
Interface
Standard
USB, Cash drawer (24V)
Option
Serial, Parallel , Ethernet, Wi-Fi, Bluetooth
Character types
Font
configuration
Chinese GB18030_2000 16*16
FontA:9*9; FontB: 7*9
Code page
PC437, PC850, PC860, PC863, PC865, PC858, PC866, PC737, PC857,
PC864, PC862
Barcode
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128, CODE93
Tally Dascom DM-310/320 User Guide V1.0
15
Control Panel
Key
Feed key
Power indicator
Green LED
Paper indicator
Red LED
Error indicator
Red LED
Buzzer
Support
Detection
Sensors
Black mark sensor(left/ right), Paper end sensor, Paper near end sensor,
cover-open sensor
Power
Input
AC 100V-240V 50-60Hz
Output
DC24V, 3A,72W
Physical Spec.
Operating
condition
0~45/ 10%~90%RH
Storage
condition
-10~50/ 10%~95%RH
Dimensions
156.4(W)*249(D)*136.7(H)mm
Casing Color
Black, white
Weight
Standard model: 2.20kg
Auto cutter equipped model: 2.3kg
Auto cutter and rewinder equipped model: 2.45kg
But these exclude the AC adapter, AC case, ribbon and paper.
Durability
Print head
lifetime
150 million characters
Mechanism
lifetime
7.5 million lines (MCBF)
Cutter lifetime
Maximum 1,500,000 cuts ( with paper thickness 0.06mm);
Maximum 1,000,000 cuts (with paper thickness 0.15mm)
Emulation
ESC/POS
Noise
Less than 60dBA
Optional Kits
Splash Cover (TBD), Power Supply Case (TBD)
Software
Driver
Windows32bit: (Win 7/XP/2000); 64bit: Win 7
OPOS, Linux CUPS
Be Compatible with the EPSON POS Application (ESC/POS )
Utilities
Firmware update
Ethernet configuration utility
Wi-Fi configuration utility
Demo utility
Applicable
standard
CCC, CE-Mark (CB, LVD, EMC), UL, FCC, and Energy Star
Tally Dascom DM-310/320 User Guide V1.0
16
1.3 Ribbon Cassette Specification
Lifetime
Single color specification, color (black) : approx. 3 million characters
Two color specification, colors (red/black):
red approx. 750,000 characters/black approx. 1.5 million characters
Be sure to use a recommended ribbon cassette in order to maintain printing quality and stabilize
printer operation.
1.4 Paper Specification
Use the following printing paper in order to maintain printing quality and stabilize paper feeding.
Roll paper
Paper width:
Roll diameter:
Core diameter:
Paper thickness:
Weight:
Recommended paper:
76.2±0.7mm (3±1/36 inch)
69.5±0.6mm (3±1/36 inch)
57.5±0.5mm (2.26±0.02inch)
φ30mm to φ83mm
Interior diameter φ10 mm, exterior diameter φ27mm
or less
0.06 to 0.085mm
52.3 to 64.0 g/m2 (JIS P8124)
(45 to 55kg/1,000 sheets/788mm x 1,091mm)
Register paper (Oji Paper Co., Ltd.) or equivalent
Pressure
sensitive paper
Non-carbon 2P/3P paper, 1 original + 1 copy /2 copies
Paper width:
Roll diameter:
Core diameter:
Paper thickness:
Recommended paper:
76.2±0.7mm (3±1/36 inch)
69.5±0.6mm (3±1/36 inch)
57.5±0.5mm (2.26±0.02 inch)
φ30mm to φ83mm
Interior diameter φ10 mm, exterior diameter φ27mm
or less
0.05 to 0.20mm
But the total thickness that can be cut is from 0.05 to
0.14mm.
2P NCR Super (Mitsubishi Paper Mills Limited) (prints
in blue) or equivalent
Cautions concerning the roll paper
Starting to wind the roll paper (interior end) processing (with center core)
It must not be folded and its internal diameter must be even.
It must not be rolled back.
There must be no glue on its center core.
It must be wound with its printing side facing outwards.
When it is 2P paper, there must be no glue between the top and bottom sheets.
In the case of 3P paper, there must be no glue on the top, middle, or bottom papers.
Use pressure sensitive paper with total thickness no greater than 0.20mm and remember that the
printer will not cut paper with total thickness greater than 0.14mm.
Tally Dascom DM-310/320 User Guide V1.0
17
If you use pressure sensitive paper with total thickness greater than 0.14mm, either do not use the
cutter or else rewind the bottom paper with the rewinder to reduce the total thickness (top paper +
middle paper) to 0.14mm or less.
Tally Dascom DM-310/320 User Guide V1.0
18
1.5 External Dimension and Mass
Width: Approximately 156.4 mm
Depth: Approximately 248 mm
Height: Approximately 137 mm
Mass: DM-310: Approx. 2.2kg (excluding power adapter)
DM-320: Approx. 2.3kg (excluding power adapter)
Tally Dascom DM-310/320 User Guide V1.0
19
1.6 Unpacking
When you receive the printer, please check for possible shipping damage:
1. Inspect the outside of both the box and the printer for possible damage.
2. Open the top cover of the printer to see if the media compartments are in order.
If you discover shipping damage upon inspection:
Immediately notify the shipping company and file a damage report.
Keep all packaging material for shipping company inspection.
Notify your authorized Tally Dascom reseller.
Printer
Ribbon cassette
Partition
AC adapter
Power cord
Sample paper roll
GIG
CD
The package contents vary with different customized order requirements.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

Tally Dascom DM-310 Manuale utente

Categoria
Stampanti a matrice di punti
Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue