Tyan S3950 Manuale utente

1

http://www.TYAN.com

Tomcat H1000S

///

S3950

Revision 1.00

may be reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregistered trademarks and company names contained in this manual

are property of their respective owners including, but not limited to the following.

TYAN, Tomcat H1000S (S3950) are trademarks of TYAN Computer Corporation.

AMD, AMD Opteron, and combinations thereof, are trademarks of Advanced Micro

Devices, Inc.

HyperTransport is a licensed trademark of the HyperTransport Technology Consortium.

AMI, AMIBIOS are trademarks of AMI Software Incorporated.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of SuSE AG.

Linux is a trademark of Linus Torvalds.

QLogic, Zircon, and combinations thereof are trademarks of QLogic Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Broadcom is a trademark of Broadcom Corporation and/or its subsidiaries

XGI is a trademark of XGI Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corporation.

Information contained in this document is furnished by TYAN Computer Corporation and

has been reviewed for accuracy and reliability prior to printing. TYAN assumes no liability

whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of

TYAN products including liability or warranties relating to fitness for a particular purpose or

merchantability. TYAN retains the right to make changes to product descriptions and/or

specifications at any time, without notice. In no event will TYAN be held liable for any direct

or indirect, incidental or consequential damage, loss of use, loss of data or other malady

resulting from errors or inaccuracies of information contained in this document.

2

http://www.TYAN.com

Table of Contents

Check the box contents! 3

Chapter 1: Introduction

1.00 Congratulations…………………………………………………………………… 4

1.01 Hardware Specifications……………………………………………………….… 4

Chapter 2: Board Installation

2.00 Board Image………………………………………………………………………… 7

2.01 Block Diagram…………………………………………………………………….... 8

2.02 Board Parts, Jumpers and Connectors………………………………………….. 9

2.03 Jumper Settings……………………………………………………………………. 10

2.04 Front Panel SATE LED Pin Header (J11)…………………………………..…… 11

2.05 USB Front Pane (J14)…………...………………………………………………… 12

2.06 COM PORT Pin Header (J20)……………………………………..……………… 12

2.07 FAN Connectors with speed control (J21~25, J33, J34)………………..….….. 13

2.08 2 x 7 Pin Fan Connector (J27)….………………………………………………… 13

2.09 IPMB Pin Header (J28)………………………….………………………………… 14

2.10 SMDC CON25X2_M3291 (J29)………………..…………………………………. 14

2.11 Front Panel Connector (J30)…………………………..………………………….. 15

2.12 TYFP2 For Barebone (J31)…………………………………………..…………… 15

2.13 LCM Pin Header (J32)…………………..…………………………………………. 16

2.14 PCI-X Bus Frequency Configuration Header (J6)…………………….………… 16

2.15 Clear CMOS Jumper by Software (JP1)…………………….….……………….. 17

2.16 PCI/PCI-X Mode Select (JP2)…………………….………………………………. 17

2.17 VGA Enable (JP3)…………..……………………………………………………… 18

2.18 Clear CMOS Jumper by Hardware (JP6)…………..……………………………. 18

2.19 Tips on Installing Motherboard in Chassis………………………………………. 19

2.20 Installing the Memory………………………………………………………………. 21

2.21 Installing the Processor and Heatsink…………………...………....................... 23

2.22 Thermal Interface Material………………………………………………………… 25

2.23 Heatsink Installation Procedures…………………………………………………. 26

2.24 Attaching Drive Cables……………………………………………………………. 28

2.25 Installing Add-in Cards……………………………….......................................... 30

2.26 Installing Optional SO-DIMM Modules…………………………………………… 31

2.27 Connecting External Devices………………………………………………...…… 32

2.28 Installing the Power Supply…………………………………………………...…... 33

2.29 Finishing up…………………………………………………………………………. 33

Chapter 3: BIOS Setup

3.1 BIOS Setup Utility……..…………………………………………………………… 34

3.2 BIOS Menu Bar………….…………………………………………………………. 35

3.3 BIOS Legend Bar……….………………………………………………………….. 35

3.4 BIOS Main Menu……..…………………………………………………………….. 37

3.5 BIOS Advanced Menu...……………………………..……………………………. 38

3.6 BIOS PCI/PnP Menu..……………………………………………………...……… 57

3.7 BIOS Boot Menu……………………………………………………………………. 59

3.8 BIOS Security Menu……………………………………………………………….. 64

3.9 BIOS Chipset Menu………………………………………………………………... 65

3.10 BIOS Exit Menu……………………………………………….……………………. 74

Chapter 4: Diagnostics

4.1 Beep Codes…………………………………………………...……………………. 75

4.2 Flash Utility………………………………………………………………………….. 75

Glossary 76

Technical Support 81

3

http://www.TYAN.com

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1x Tomcat H1000S (S3950) motherboard

1 x 34-Pin floppy drive cable

4 x SATA cable

2 x SATA Drive Power Adapter

1 x Ultra-DMA-66/100 IDE cable

1 x Tomcat H1000S (S3950) User’s Manual

1 x Tomcat H1000S (S3950) Quick Reference Guide

1 x TYAN driver CD

1 x I/O shield

1 x CPU Retention Frame

If any of these items are missing, please contact your vendor/dealer for replacement

before continuing with the installation process.

4

http://www.TYAN.com

Chapter 1: Introduction

1.00 – Congratulations!

You have purchased one of the most powerful AMD Opteron

TM

processor solutions, the

Tomcat H1000S (S3950). The Tomcat H1000S (S3950) is a flexible AMD

®

platform for

multiple applications, based on the HT-1000 chipset. The S3950 is designed to support

the AMD Opteron

TM

processor on an AM2 socket. It features an integrated Dual Gigabit

Ethernet LAN, built-in 16MB XGI XG20

TM

video plus four serial ATA ports. The S3950

offers exceptional performance and versatility for your server platform needs.

Remember to visit TYAN’s Website at http://www.tyan.com

. There you can find

information on all of TYAN’s products with FAQs, distributors list and BIOS setting

explanations.

1.01 – Hardware Specifications

Processor

- Single AM2 socket

- Supports AMD Opteron

TM

1000 Series

Processor

- Up to 800 MHz Hyper-Transport link

support

Chipset

- Broadcom HT1000

- SMSC SCH4307 Super I/O chip

Memory

- Four 240-pin unbuffered DDR2 DIMM

sockets

- Supports up to 8GB of unbuffered

ECC DDR2 400,533,667

- Dual channel memory bus

Expansion Slots

- One 64-bit, 133MHz (3.3V) PCI-X slot

- Four 32-bit, 33MHz PCI v2.3 slots

- Tyan TARO™ SO-DIMM

- Total of five usable slots

Integrated I/O Interfaces

- One floppy connector supports up to two

drives

- One IDE connectors for two IDE devices

- Two USB 2.0 Headers (via cable, 2 x 5pin)

- 2 x 25 connector for Tyan IPMI SMDC

card (M3291)

Integrated 2D Graphics

- XGI XG20 graphics controller

- 16MB Frame Buffer of video memory

(upgradeable to 32MB)

Back Panel I/O Ports

- One PS/2 Keyboard & Mouse ports

- Two RJ45 10/100/1000 Base-T port

w/ activity LED

- Two USB 2.0 ports

- One 9-pin UART Serial port

- One 15-pin VGA port

Integrated LAN Controllers

- Two Intel i82541PI GbE LAN

controllers

- Operating on PCI 32-bit/33MHz bus

- With ASF 2.0/WfM/Teaming support

BIOS

- AMI BIOS® on 8Mbit LPC Flash ROM

- Serial Console Redirect

- USB boot supported

- Supports ACPI

- PnP, DMI 2.0, WfM 2.0 Power

Management

5

http://www.TYAN.com

- Four SATA ports

- One COM2 header

System Management

- One Analog Device ADT7476

- Temperature and voltage monitoring

- One (1) 3+1-pin CPU fan header with

tachometer monitoring and smart FAN

control

- Six (6) 3+1-pin system fan headers with

tachometer monitoring, all of them support

smart FAN control

- One 2 x 7-pin fan con (reserve to support

TYAN FAN Adapter Board---M1012)

- Watchdog timer support

Integrated SATA Controller

- Supports four SATA ports running at

1.5Gb/s with NCQ

- RAID 0, 1, 5 and 10 supported

Power

- Onboard 4-phase VRD

- EPS12V (24+8) power connectors

Form Factor

- ATX footprint

- 12" x 9.6"; 305mm x 244mm

- 6-layer board

Regulatory

- FCC Class B (Declaration of

Conformity)

- European Community CE

(Declaration of Conformity)

Software Specifications

OS (Operating System) Support

Microsoft Windows Server 2003 + SP1 32-bit

Microsoft Windows Server 2003 64-bit

SuSE 9.3 Pro 32/64-bit

SuSE 9.0 + SP2 32/64-bit

SuSE 10 64-bit

RHEL3 Update 5 32-bit

RHEL4 Update 1 32/64-bit

TYAN reserves the right to add support or discontinue support for any OS with or

without notice.

6

http://www.TYAN.com

Chapter 2: Board Installation

Installation

You are now ready to install your motherboard. The mounting-hole pattern of the Tomcat

H1000S (S3950) matches the ATX specification. Before continuing with installation,

confirm that your chassis supports an ATX motherboard.

How to install our products right…. the first time!

The first thing you should do is read this user’s manual. It contains important information

that will make configuration and setup much easier. Here are some precautions you should

take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the antistatic

bag. Unplug the power from your computer power supply and then touch a

safely grounded object to release static charge (i.e. power supply case). For the

safest conditions, Tyan recommends wearing a static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the board, or

flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory

modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic bag

that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your chassis,

as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED

7

http://www.TYAN.com

2.00 – Board Image

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above

picture.

The following page includes details on the vital components of this motherboard.

8

http://www.TYAN.com

2.01--Block Diagram

9

http://www.TYAN.com

2.02 – Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

http://www.tyan.com

10

2.03 – Jumper Settings

Jumper Function Settings

J11

Front Panel SATA LED

Pin Header

See Section 2.04

J14 USB Front Panel See Section 2.05

J20 COM PORT Pin Header See Section 2.06

J21~J25,

J33, J34

FAN Connectors with speed control See Section 2.07

J27 2 x 7 Pin Fan Connector See Section 2.08

J28 IPMB Pin Header See Section 2.09

J29 SMDC Connector See Section 2.10

J30 Front Panel Connector See Section 2.11

J31 TYFP2 For Barebone See Section 2.12

J32 LCM Pin Header See Section 2.13

J6

PCI-X Bus Frequency Configuration

Header

See Section 2.14

JP1 Clear CMOS Jumper by Software See Section 2.15

JP2 PCI/PCIX Mode Select See Section 2.16

JP3 VGA Enable See Section 2.17

JP6 Clear CMOS Jumper by Hardware See Section 2.18

http://www.tyan.com

11

Jumper Legend

OPEN - Jumper OFF Without jumper covered

CLOSED - Jumper ON With jumper covered

To indicate the location of pin-1

2.04 – Front Panel SATA LED Pin Header (J11)

Signal

Description

#

Signal

Description

SATA1 LED+

1 2

SATA1 LED--

SATA2 LED+

3 4

SATA2 LED--

SATA3 LED+

5 6

SATA3 LED--

SATA4 LED+

7 8

SATA4 LED--

http://www.tyan.com

12

2.05 – USB2.0 Header (J14)

Signal

Description

#

Signal

Description

USB PWR

1 2

USB PWR

USB 3 - -

3 4

USB 4 - -

USB 3 +

5 6

USB 4 +

GND

7 8

GND

KEY

9 10

GND

2.06 – COM2 PORT Pin Header (J20)

Signal

Description

#

Signal

Description

DCD

1 2

DSR

RXD

3 4

RTS

TXD

5 6

CTS

DTR

7 8

RI

GND

9 10

KEY

http://www.tyan.com

13

2. 07 – FAN Connectors with Speed Control (J21~J25, J33, J34)

Pin_4: Speed control

Pin_3 : Tachometer

Pin_2 : +12V

Pin_1

Pin_1 : GND

2.08 – 2 x 7 Pin Fan Connector (J27)

NOTE: This 2 x 7 Pin Fan Connector is

for Tyan Barebone use only.

Signal Pin Pin Signal

BB_FAN1_TACH

1 2

NC

BB_FAN2_TACH

3 4

NC

BB_FAN3_TACH

5 6

NC

BB_FAN4_TACH

7 8

NC

BB_FAN5_TACH

9 10

NC

GND

11 12

Key

GND

13 14

FAN1_PWM

http://www.tyan.com

14

2.09 – IPMB Pin Header (J28)

Pin_4 : NC

Pin_3 : IPMB CLK

Pin_2 : GND

Pin_1

Pin_1 : IPMB DATA

2.10 – SMDC Connector (J29)

For connection with Tyan Server

Management Daughter Card (SMDC).

The SMDC connector is compatible only

with the Tyan M3291 (SMDC).

http://www.tyan.com

15

2.11 – Front Panel Connector (J30)

Signal PIN # PIN # Signal

HDD

LED+

1 2

PWR

LED+

HDD

LED-

3 4

PWR

LED-

Reset

Button -

5 6

POWER

S/W

Reset

Button+

7 8

POWER

S/W

NMI

9 10

FANFAIL

LED

NMI

11 12

FANFAIL

LED

5VSB

13 14

NC

SDA

15 16

GND

SCL

17 18

Intruder

2.12 – TYFP2 For TYAN Barebone (J31)

Signal

Description

#

Signal

Description

LAN1 LED+

1 2

LAN1 LED--

LAN2 LED+

3 4

LAN2 LED--

NC

5 6

NC

ID LED+

7 8

ID LED--

ID BUTTON+

9 10

ID BUTTON--

NC

11 12

KEY

http://www.tyan.com

16

2.13 – LCM Pin Header (J32)

VCC PIN 1 PIN 2 RXD2

KEY PIN 3 PIN 4 GND

5VSB PIN 5 PIN 6 TXD2

2.14 – PCI-X Bus Frequency Configuration Header (J6)

OPEN - Jumper OFF

CLOSED - Jumper ON

J6 is used to adjust PCI-X frequency

Open(Default): 66MHz/100MHz;

Closed: 133MHz

http://www.tyan.com

17

2.15 – Clear CMOS Jumper by Software (JP1)

Pin_3

Pin_1

DEFAULT

Pin_3

Pin_1

Clear CMOS

By Software

NOTE: BIOS will clear CMOS

during the POST process

automatically when selected.

2.16 - PCI/PCI-X Mode Select (JP2)

Pin_3

Pin_1

Auto Detect PCI-X

Device

Pin_3

Pin_1

Force to PCI Mode

http://www.tyan.com

18

2.17 – VGA Enable (JP3)

Pin_3

Pin_1

DEFAULT

VGA Enable

Pin_3

Pin_1

Disable

XG20 VGA

2.18 – Clear CMOS Jumper by Hardware (JP6)

Pin_3

Pin_1

DEFAULT

Pin_3

Pin_1

You can reset the CMOS settings by using

this jumper or if you have forgotten your

system/setup password.

- Power off system and

disconnect both power

connectors from the

motherboard

- Use jumper cap to close

Pin_2 and Pin_3 for

several seconds to Clear

CMOS

- Put jumper cap back to

Pin_1 and Pin_2 (default

setting)

Reconnect power and power on the system

http://www.tyan.com

19

2.19 – Tips on Installing the Motherboard in Chassis

Before installing your motherboard, make sure your chassis has the necessary

motherboard support studs installed. These studs are usually metal and are gold in color.

Usually, the chassis manufacturer will pre-install the support studs. If you’re unsure of stud

placement, simply lay the motherboard inside the chassis and align the screw holes of the

motherboard to the studs inside the case. If there are any studs missing, you will know

right away since the motherboard will not be able to be securely installed.

Thunder H1000S (S3950) Mounting Hole Placement

http://www.tyan.com

20

Some chassis include plastic studs instead of metal. Although the plastic studs are usable,

Tyan recommends using metal studs with screws that will fasten the motherboard more

securely

in place.

Below is a chart detailing what the most common motherboard studs look like and how

they should be installed.

TIP: Use metal studs if possible, as they hold the motherboard into place more securely

than plastic standoffs.

La pagina sta caricando ...

Tyan S3950 Manuale utente

Questo manuale è adatto anche per

Tyan S3950 Manuale utente

in altre lingue

Documenti correlati

Altri documenti