Biostar TF7050-M2 Manuale del proprietario

TF7050-M2/TF7025-M2 Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protec tion against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interfere nce will not occur in a particular ins tallatio n.

The ve ndor makes no represe ntations or warranties with respec t to the

contents here and specially disclaims any implied warranties of merchantability

o r fi tness fo r a ny purpose . F urt he r t he ve ndo r res e rves t he ri ght to rev is e t h is

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplication of this publication, in part or in whole, is not allowed without first

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction ............................................. 3

1.1 Be fore You Start................................................................... 3

1.2 Package Checklist................................................................ 3

1.3 Motherboard Features.......................................................... 4

1.4 Re ar Panel Conne cto rs (for TF7050-M2) ................................ 6

1.5 Rear Panel Conne ctors (for TF7025-M2)................................. 7

1.6 Motherboard Layout (for TF7050-M2)................................... 8

1.7 Mothe rboard Layout (for TF7025-M2) ................................... 9

Chapter 2: Hardware Installation............................10

2.1 Installing Central Processing Unit (CPU)...............................10

2.2 FAN Headers.......................................................................12

2.3 Installing System Memory.....................................................13

2.4 Conne ctors and Slots ............................................................15

Chapter 3: Headers & Jumpers Setup .....................17

3.1 How to Setup Jumpers..........................................................17

3.2 Detail Settings.....................................................................17

Chapter 4: RAID Functions.......................................25

4.1 Operation System................................................................25

4.2 Raid Arrays.........................................................................25

4.3 How RAID Wo rks.................................................................25

Chapter 5: OverClock Quick Guide ..........................29

5.1 T-Power Introduction...........................................................29

5.2 T-Powe r BIOS Feature .........................................................30

5.3 T-Powe r Windows Fe ature...................................................36

Chapter 6: Useful Help .............................................43

6.1 Driver Installation Note .......................................................43

6.2 Award BIOS Beep Code........................................................44

6.3 Extra Information................................................................44

6.4 Troubleshooting...................................................................46

Appendencies: SPEC In Other Language ................48

German................................................................................................48

France..................................................................................................50

Italian..................................................................................................52

Spanish ................................................................................................54

Portuguese...........................................................................................56

Polish...................................................................................................58

Russian................................................................................................60

Arabic..................................................................................................62

Japanese ..............................................................................................64

T F7050 -M2/T F7025-M2

3

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk you for choosing our pro duct. Be fore yo u start installing the

mo therboa rd , plea se make sure you fo llow the instructions be low:

 Prepare a dry and stable working environment with

s ufficie nt ligh ting .

 Always disconnect the computer from power outlet

be fo re ope ra tion.

 Befo re you take the mo the rboa rd ou t f rom a n ti-s ta tic

bag, ground yourself properly by touching any safely

grounded appliance, or use grounded wrist strap to

remove the static charge.

 Avo id tou ch ing the compone nts o n mo the rboa rd o r the

rear side of the boa rd unless necessary. Hold the bo a rd

on the edge, do not try to bend or flex the board.

 Do no t leave any unfastened small parts inside the

case after installation. Loose parts will cause short

circuits which ma y damage the equipment.

 Keep the computer from dangerous area, such as heat

source, humid a ir and wate r.

1.2 PACKAGE CHECKLIST

HDD Cable X 1

Se ria l ATA Cab le X 1

Rear I/O Panel for ATX Case X 1

User’s Ma nual X 1

Fully Setup Driver CD X 1

FDD Cable X 1 (optional)

USB 2.0 Cable X1 (optional)

S/P DI F ou t Ca ble X 1 (op tiona l)

Se ria l ATA Po we r Cab le X 1 (o ptio nal)

Motherboard Manual

4

1.3 MOT HERBOARD FEATURES

TF7050-M2 TF7025-M2

CPU

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 /

Sempron processors

AMD 64 Arc hitecture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

Socket AM2

AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 /

Sempron processors

AMD 64 Arc hitecture enables 32 and 64 bit

computing

Supports Hyper Transport and Cool=n=Quiet

FSB

Supports up to 1 GHz Bandwidth

Support HyperTransport

Supports up to 1 GHz Bandwidth

Support HyperTransport

Chipset GeForce 7050PV/NF630a GeForce 7025/NF630a

Super I/O

ITE 8716F

Provides the most commonl

y

us e d l e

g

ac

y

Su

p

e

r

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

ITE 8716F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Environment Control initiatives,

H/W Monitor

Fan Speed Controller

ITE's "Smart Guardian" function

Main

Memory

DDR2 DIMM Slots x 4

Max Memory Capacity 4GB

Eac h DIMM supports 256/512MB & 1GB DDR2

Dual Channel Mode DDR2 memory module

Supports DDR2 400/ 533 / 667 / 800

Registered DIMM and ECC DIMM is not

supported

DDR2 DIMM Slots x 4

Max Memory Capacity 4GB

Eac h DIMM supports 256/512MB & 1GB DDR2

Dual Channel Mode DDR2 memory module

Supports DDR2 400/ 533 / 667 / 800

Registered DIMM and ECC DIMM is not

supported

Graphics

Integrated in GeForce 7050PV/NF630a Chipset

Max Shared Video Memory is 256MB

Integrated in GeForce 7025/NF630a Chipset

Max Shared Video Memory is 256MB

IDE

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Master Mode

supports PIO Mode 0~4,

SA TA II

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

Integrated Serial ATA Controller

Data transfer rates up to 3 Gb/s.

SATA Version 2.0 specification compliant.

LAN

Realtek RTL 8111B / 8101E (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for RTL 8111B only)

Half / Full duplex capability

Realtek RTL 8111B / 8101E (optional)

10 / 100 Mb/s / 1Gb/s auto negotiation (Gigabit

bandwidth is for RTL 8111B only)

Half / Full duplex capability

T F7050 -M2/T F7025-M2

5

TF7050-M2 TF7025-M2

Sound

ALC888 (Ver 5.x) / ALC861VD (Ver 6.x)

7.1 channels audio out (Ver 5. x) /

5.1 channels audio out (Ver 6. x)

High Definition Audio

2 channels audio out for HDMI Audio

ALC888 (Ver 5.x) / ALC861VD (Ver 6.x)

7.1 channels audio out (Ver 5. x) /

5.1 channels audio out (Ver 6. x)

High Definition Audio

PCI s lot x2 PCI s lot x2

PCI Express x16 slot x1 PCI Express x16 slot x1

Slots

PCI Express x 1 slot x1 PCI Express x 1 slot x1

Floppy c onnector x1 Floppy c onnector x1

Printer Port c onnector x1 Printer Port c onnector x1

IDE Connector x1 IDE Connector x1

SA TA Connect or x4 SA TA C onnector x4

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD-in Connec tor x1 CD-in Connec tor x1

S/PDIF out connector x1 S/PDIF out connector x1

S/PDIF in connector (O ptional) x1 S/PDIF in connector (O ptional) x1

CPU Fan header x1 CPU Fan header x1

Sys tem Fan header x3 Sys tem Fan header x3

CMOS clear header x1 CMOS clear header x1

USB connector x3 USB connector x3

S eri al port C onnect or x1 S eri al port Connect or x1

Power Connector (24pin) x1 Power Connector (24pin) x1

On Board

Connector

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

S-Video port x1

HDMI port x1

VGA port x1

LAN port x1

USB Port x4

Audio Jack (for Ver 5.x) x6

Audio Jack (for Ver 6.x) x3

PS/2 Keyboard x1

PS/2 Mouse x1

VGA port x1

DVI-D port x1

LAN port x1

USB Port x4

Audio Jack (for Ver 5.x) x6

Audio Jack (for Ver 6.x) x3

Board Size 235 mm(W) x 244 mm(L) 235 mm(W) x 244 mm(L)

Special

Features

RAID 0 / 1 / 5 / 0+1 s upport RAID 0 / 1 / 5 / 0+1 s upport

OS Support

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Windows 2000 / XP / VISTA

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Motherboard Manual

6

1.4 REAR PANEL CONNECTORS (FOR TF7050-M2)

X

PS/2 Mouse Port

Y

PS/2 Keyboard Port

Z S-Video TV-Out Port

Transmit a nal og vi deo sig nals to TV or an y ot her dis pla y p anels eq uip pe d with S- Vide o

input .

[ HDMI Port

The Hig h- Definition Multim edia Int erfac e ( HDMI) is an all- dig ital audio / vide o int er fac e

capa ble of tra nsmit ting unc o mpress ed s trea ms t o a n AV recei ver or a ny co mp atibl e dig ital

audi o a nd/ or vide o monitor, suc h as a dig ital tele visio n.

The HDMI a udio fu nction is n ot s upp or te d b y Win do ws 20 00 / XP.

\ D-Sub VGA Port

Transmit a nal og vi deo sig nals to co mputer monitor or an y ot her dis pla y p an els eq uip pe d

with D- S ub VGA in put .

] USB 2.0 Port x 4 ^ RJ-45 LAN Port

_ Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x)

Port 2-Channel 4-Channel 6-Channel/8-Channel

Blue Line- In Line-In Line-In

Green Line-Out Front Sp eaker Out Front Sp eaker Out

Pink Mic In Mic In Mic In

Orange Center/ Sub woof er

Black Rear Spea ker O ut Rear Spe a ker O ut Rear Spe a ker O ut

Grey Side S pe a ker O ut

NOTE: The HDMI a udio is c urrentl y onl y s upported b y Wi ndows VIS TA.

NOTE: The G eForce 7050P V/NF6 30 a chips et uses the sa me c ha nn el to con tr ol S-Vid eo an d

D- Sub f or tr ans mitting a nal og vi deo sig nals, so th ese ports c an not work simultan eo usl y.

T F7050 -M2/T F7025-M2

7

1.5 REAR PANEL CONNECTORS (FOR TF7025-M2)

X

PS/2 Mouse Port

Y

PS/2 Keyboard Port

Z DVI-D VGA Port

The Dig ital Visual I nt er face (DVI) is a vid eo i nterf ace tr ans mitting dig ital vid eo sig nals to

dig ital displa y de vices s uch as flat pan el LCDs or dig ital pr oject or s. Th e DVI-D co nn ector

allows dig ital sig nals trans mission onl y.

[ D-Sub VGA Port

Transmit a nal og vi deo sig nals to co mputer monitor or an y ot her dis pla y p an els eq uip pe d

with D- S ub VGA in put .

\ USB 2.0 Port x 4 ] RJ-45 LAN Port

^ Audio Jack x 6 (for Ver 5.x) / Audio Jack x 3 (for Ver 6.x)

Port 2-Channel 4-Channel 6-Channel/8-Channel

Blue Line- In Line-In Line-In

Green Line-Out Front Sp eaker Out Front Sp eaker Out

Pink Mic In Mic In Mic In

Orange Center/ Sub woof er

Black Rear Spea ker O ut Rear Spe a ker O ut Rear Spe a ker O ut

Grey Side S pe a ker O ut

Motherboard Manual

8

1.6 MOTHERBOARD LAYOUT (FOR TF7050-M2)

JK BM S1

JTVOUT1

JHDMI

VGA

JUSB1

JUSBLAN1

JAUDIO2

(for Ver 5.x)

JAUDIOF1

Codec

JCDI N1

Super I/ O

JP R NT1

JCOM1

JUSB2 JU S B3 JU S B4

JSFAN1

JSFA N 2

J PAN EL1

PWR SW1 RS TS W1

SA TA 3 SA TA 4

SA TA 2SATA1

BIOS

FDD1

IDE1

JATX PW R 1

DI M MA1

DI M MB1

DI M MB2

DI M MA2

JC FAN 1

Socket A M2

GeF or ce

7050PV/

aNF630

LAN

JNFAN1

PCI1

PCI2

PE X1 _1

PEX16_1

JSPDIF_OUT1JSPDIF_I N1

BAT1

JCMOS1

JATXPWR2

LED_D1

LED_D2

JU SB V1

JU S BV2

JA U DI O 1

(f or Ver 6.x)

Not e: represents the 1■

st

pin.

T F7050 -M2/T F7025-M2

9

1.7 MOTHERBOARD LAYOUT (FOR TF7025-M2)

JKB M S1

VGA

JUSB1

JUSBLAN1

JAUDIO2

(for Ver 5.x)

JAUDIOF1

Codec

JCDIN1

Super I/O

JPR NT1

JC OM1

JUSB2 JU S B3 JU S B4

JSFAN1

JS FAN 2

J PAN EL1

PWRSW1 RS TSW1

SA TA 3 S ATA 4

SA TA 2SATA1

BIOS

FDD1

IDE1

JATXPWR1

DI M MA1

DI M MB1

DI M MB2

DI M MA2

JCFAN1

Socket A M2

GeF or ce

702 5 /

aNF630

LAN

JNFAN1

PCI1

PCI2

PE X1 _1

PEX16_1

JSPDIF_O UT1JSPDI F_IN1

BAT1

JCMOS1

JAT XP WR 2

LED_D1

LED_D2

J U SB V1

JU S BV2

JA U DI O 1

(for Ver 6. x)

DVI-D

Not e: represents the 1■

st

pin.

Motherboard Manual

10

CHAPTER 2: HARDWARE INSTALLATION

2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only

in the correct orientation.

T F7050 -M2/T F7025-M2

11

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

Motherboard Manual

12

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3

FAN RPM rate

sense

1

4

4 Smart Fan

Control (By Fan)

JNFAN1: North Bridge Fan Header

JSFAN1/JSFAN2: System Fan Header

Assignment

1 Ground

2 +12V

13

JSFAN2

1

3

JNFAN1

JSFAN1

1

3

3 FAN RPM

rate sense

Note:

The JCFAN1 su pp or ts 4-pin he ad c onnect or. The J SFAN1/JSFAN2 an d JNFAN1

supp or t 3-pi n hea d conn ector s. When co nnec ting wit h wir es onto co nnec tors, pleas e

not e that the r ed wir e is th e p ositive and should be con nec ted to pin #2, a nd t he blac k

wir e is Gro un d a nd s ho uld be c on nect ed to GND.

T F7050 -M2/T F7025-M2

13

2.3 INST ALLING SYSTEM MEMORY

A. Memory Modules

DIMMA1

DIMMB1

DIMMA2

DIMMB2

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

Motherboard Manual

14

B. Mem ory Capacity

DIMM Socket

Location

DDR2 Module

To t a l Me m o r y

Size

DIMMA1 256MB/512MB/1024MB

DIMMB1 256MB/512MB/1024MB

DIMMA2 256MB/512MB/1024MB

DIMMB2 256MB/512MB/1024MB

Max is 4GB.

C. D ual Channel Memory in stallation

To trigger the Dual Channel f unction of the motherboard, the memory module

must meet the following requirements:

Install memory module of the same density in pairs, shown in the f ollowing table.

Dual Channel Status

DI MMA1

DI MMB 1 DI MMA2 DI MMB2

Enabled O O X X

Enabled X X O O

Enabled O O O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or

x16)

T F7050 -M2/T F7025-M2

15

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Di sk Connector

The motherboard prov ides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the

prov ided f loppy drive ribbon cables.

133

234

ID E1: Hard Disk C onne ctor

The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO

Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality.

The IDE connector can connect a master and a slave drive, so y ou can connect

up to two hard disk driv es.

21

3940

Motherboard Manual

16

PEX16_1: PCI-Express x16 Slot

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 4GB/s simultaneously per

direction, f or an aggregate of 8GB/s totally.

PEX1_1: PCI-Express x1 slots

- PCI-Express 1.0a compliant.

- Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins.

- 2X bandwidth ov er the traditional PCI architecture.

PEX1_1

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands f or

Peripheral Component Interconnect, and it is a bus standard for expansion

cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

T F7050 -M2/T F7025-M2

17

CHAPTER 3: HEADERS & JUM PERS SETUP

3.1 HOW T O SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DET AIL SET T IN GS

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep

button and speaker connection. It allows user to connect the PC case’s f ront

panel switch functions.

1

8

16

SLP

PWR_LED

On/Off

RST

HL ED

SPK

++

+

9

-

Pin Assignment Functio n Pin Assignment Functio n

1 +5V 9 Sleep control

2 N/A 10 Ground

Sleep button

3 N/A 11 N/A N/A

4 Speaker

Speaker

Connector

12 Power LED (+)

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)

Hard drive

LED

14 Power LED (-)

Power LED

7 Ground 15 Power button

8 Reset control

Reset button

16 Ground

Power-on button

Motherboard Manual

18

J ATXPW R1 : ATX P o we r S ou rce C onne cto r

This connector allows user to connect 24-pin power connector on the ATX

power supply.

1

12

13

24

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V

14 -12V 2 +3.3V

15 Ground 3 Ground

16 PS_ON 4 +5V

17 Ground 5 Ground

18 Ground 6 +5V

19 Ground 7 Ground

20 NC 8 PW_OK

21 +5V 9 Standby Voltage+5V

22 +5V 10 +12V

23 +5V 11 +12V

24 Ground 12 +3.3V

J ATXPW R2 : ATX P o we r S ou rce C onne cto r

By connecting this connector, it will provide +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 Ground

1

3

2

4

4 Ground

T F7050 -M2/T F7025-M2

19

JUSB2/JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC f ront panel,

and also can be connected with internal USB devices, like USB card reader.

Pin Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

10 NC

1

2

9

10

JUSB2

JUSB3

JUS B4

J USB V1 /J USB V2: Po we r So urce Hea de rs f o r USB P o rts

Pin 1-2 Close:

JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1.

JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3/JUSB4).

Pin 2-3 Close:

JUSBV1: USB ports at JUSB1/JUSBLAN1 are powered by +5V standby

v oltage.

JUSBV2: USB ports at front panel (JUSB2/JUSB3/JUSB4) are powered by

+5V standby voltage.

31

1

3

Pin 1-2 close

JUSBV1

JUSBV2

1

3

1

3

Pin 2-3 close

Note:

In ord er to s up port this f unctio n “P ower-On s yst em vi a USB de vic e,” “JUSBV1 / JUSB V2”

jump er cap sh ould be plac ed on Pin 2-3 in di vidu all y.

Motherboard Manual

20

SATA1~SATA4: Serial ATA Connectors

The motherboard has a PCI to SATA Controller with 4 channels SATA interf ace.

Assignment

1 Ground

2 TX+

3 TX-

4 Ground

5 RX-

6 RX+

147

SA TA 1

SATA2 SATA4

SATA3

7 Ground

JAUDIO F1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC f ront

panel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic Left in

2 Ground

3 Mic Right in

4 GPIO

5 Right line in

6 Jack Sense

7 Front Sense

8 Key

9 Left line in

10 Jack Sense

1

9

2

10

JCDIN1: CD-RO M Audio-in Connector

This connector allows user to connect the audio source f rom the v ariaty dev ices,

like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc..

Assignment

1 Left Channel

Input

2 Ground

3 Ground

14

4 Right Channel

Input

La pagina sta caricando ...

Biostar TF7050-M2 Manuale del proprietario

Questo manuale è adatto anche per

Biostar TF7050-M2 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti