Cameo S4 IP Manuale utente

USER‘S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D‘UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘USO

S4 IP

LED SOFTLIGHT PANEL - IP65

CLS4IP

RGBW

CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ /

CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 8

INTENDED USE 8

DEFINITIONS AND SYMBOL EXPLANATIONS 8

SAFETY INSTRUCTIONS 9

NOTES ON PORTABLE OUTDOOR DEVICES 12

INCLUDED 12

INTRODUCTION 12

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 13

OPERATION 16

MOUNT TV SPIGOT ON U-BRACKET 32

STAND MOUNTING 33

USE TV SPIGOT FOR TRUSS MOUNTING 34

OMEGA BRACKET 35

DIFFUSER DISC 36

OPTIONAL ACCESSORIES 38

CARE, MAINTENANCE AND REPAIR 39

DIMENSIONS (mm) 40

TECHNICAL DATA 41

EXPLANATION OF IP PROTECTION CLASS 43

MINIMUM DISTANCE TO ILLUMINATED SURFACE 43

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 43

DISPOSAL 44

MANUFACTURER’S DECLARATIONS 44

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 47

BESTIMMUNGSGEMÄSSER GEBRAUCH 47

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 47

SICHERHEITSHINWEISE 48

HINWEISE FÜR ORTSVERÄNDERLICHE OUTDOOR-GERÄTE 52

LIEFERUMFANG 52

EINFÜHRUNG 52

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 53

BEDIENUNG 56

TV-ZAPFEN AM U-BÜGEL MONTIEREN 73

STATIVMONTAGE 74

TV-ZAPFEN FÜR TRAVERSENMONTAGE NUTZEN 75

OMEGA-BÜGEL 76

DIFFUSORSCHEIBE 77

OPTIONALES ZUBEHÖR 79

PFLEGE, WARTUNG UND REPARATUR 80

ABMESSUNGEN (mm) 81

TECHNISCHE DATEN 82

ERLÄUTERUNGEN ZUR IP-SCHUTZART 84

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 84

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 84

ENTSORGUNG 85

HERSTELLERERKLÄRUNGEN 86

FRANÇAIS

INFORMATIONS CONCERNANT CE MANUEL D’UTILISATION 87

UTILISATION CONFORME 87

EXPLICATIONS DES TERMES ET DES SYMBOLES 87

CONSIGNES DE SÉCURITÉ 88

REMARQUES CONCERNANT LES APPAREILS D’EXTÉRIEUR MOBILES 92

CONTENU DE LA LIVRAISON 92

INTRODUCTION 92

RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET D’AFFICHAGE 94

UTILISATION 97

INSTALLATION DU GOUJON ADAPTATEUR TV SUR L’ÉTRIER EN U 114

MONTAGE SUR TRÉPIED 115

UTILISER UN GOUJON ADAPTATEUR TV POUR MONTAGE SUR TRAVERSE 116

ÉTRIER OMEGA 117

DISQUE DIFFUSEUR 118

ACCESSOIRES EN OPTION 120

ENTRETIEN, MAINTENANCE ET RÉPARATION 121

DIMENSIONS (mm) 122

CARACTÉRISTIQUES TECHNIQUES 123

EXPLICATIONS RELATIVES À L’INDICE DE PROTECTIONIP 125

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE 125

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX NORMALEMENT INFLAMMABLES 125

ÉLIMINATION 126

DÉCLARATIONS DU FABRICANT 127

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE INSTRUCCIONES 128

USO PREVISTO 128

TÉRMINOS Y SÍMBOLOS 128

INSTRUCCIONES DE SEGURIDAD 129

INDICACIONES PARA EQUIPOS PORTÁTILES DE EXTERIOR 133

VOLUMEN DE SUMINISTRO 133

INTRODUCCIÓN 133

CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS DE VISUALIZACIÓN 135

FUNCIONAMIENTO 138

MONTAJE DEL ADAPTADOR DE ESPIGA EN LA ABRAZADERA EN U 154

MONTAJE DEL TRÍPODE 155

USAR ADAPTADOR DE ESPIGA PARA MONTAJE EN TRAVESAÑO 156

SOPORTE DE MONTAJE OMEGA 157

DISCO DIFUSOR 158

ACCESORIOS OPCIONALES 160

CUIDADO, MANTENIMIENTO Y REPARACIÓN 161

DIMENSIONES (mm) 162

DATOS TÉCNICOS 163

EXPLICACIÓN SOBRE LA CLASE DE PROTECCIÓN IP 165

DISTANCIA MÍNIMA CON RESPECTO A LA SUPERFICIE ILUMINADA 165

DISTANCIA MÍNIMA CON RESPECTO A MATERIALES NORMALMENTE INFLAMABLES 165

ELIMINACIÓN 166

DECLARACIONES DEL FABRICANTE 167

POLSKI

INFORMACJE DOTYCZĄCE NINIEJSZEJ INSTRUKCJI OBSŁUGI 168

UŻYTKOWANIE ZGODNE ZPRZEZNACZENIEM 168

OBJAŚNIENIA TERMINOLOGII ISYMBOLI 168

ZASADY BEZPIECZEŃSTWA 169

UWAGI DOTYCZĄCE PRZENOŚNEGO SPRZĘTU ZEWNĘTRZNEGO 172

ZAKRES DOSTAWY 172

WPROWADZENIE 172

PRZYŁĄCZA, ELEMENTY OBSŁUGI IWSKAŹNIKI 174

OBSŁUGA 177

MONTAŻ ADAPTERA GWINTOWEGO NA UCHWYCIE U 194

MONTAŻ NA STATYWIE 195

KORZYSTANIE ZADAPTERA GWINTOWEGO DO MONTAŻU NA TRAWERSIE 196

UCHWYT OMEGA 197

TARCZA DYFUZORA 198

AKCESORIA DODATKOWE 200

CZYSZCZENIE, KONSERWACJA INAPRAWY 201

WYMIARY (mm) 202

DANE TECHNICZNE 203

OBJAŚNIENIA DOTYCZĄCE STOPNIA OCHRONY IP 205

MINIMALNA ODLEGŁOŚĆ OD POWIERZCHNI OŚWIETLANEJ 205

MINIMALNA ODLEGŁOŚĆ OD MATERIAŁÓW NORMALNIE PALNYCH 205

UTYLIZACJA 206

ITALIANO

INFORMAZIONI SUL PRESENTE MANUALE D'USO 207

UTILIZZO CONFORME 207

SPIEGAZIONE DI CONCETTI E SIMBOLI 207

INDICAZIONI SULLA SICUREZZA 208

AVVERTENZE PER DISPOSITIVI PORTATILI PER ESTERNI 211

FORNITURA 212

INTRODUZIONE 212

CONNETTORI, ELEMENTI DI COMANDO E VISUALIZZAZIONE 213

UTILIZZO 216

INSTALLAZIONE DEL CODOLO TV SULLA STAFFA A U 233

MONTAGGIO SU SUPPORTO 234

UTILIZZARE CODOLI TV PER IL MONTAGGIO SU TRAVERSA 235

STAFFA OMEGA 236

DIFFUSORE 237

ACCESSORI OPZIONALI 239

PULIZIA, MANUTENZIONE E RIPARAZIONE 240

DIMENSIONI (mm) 241

DATI TECNICI 242

SPIEGAZIONI SULLA PROTEZIONE IP 244

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 244

DISTANZA MINIMA DAI MATERIALI NORMALMENTE INFIAMMABILI 244

SMALTIMENTO 245

DICHIARAZIONI DEL PRODUTTORE 246

DMX

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX / CONTROL DMX /

STEROWANIE DMX / CONTROLLO DMX 247

8

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of problem-free operation. Please read this user manual carefully to be able to use

your new Cameo product quickly and optimally. Further information about Cameo Light is availab-

le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

The product is a device for event technology!

This product has been developed for professional use in the ﬁeld of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualiﬁed users with specialist knowledge of event

technology!

Use of the product outside the speciﬁed technical data and operating conditions is considered

inappropriate!

Liability for damage and third-party damage to persons and property due to inappropriate use is

excluded!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. HAZARD: The word HAZARD, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates situations in

which there is an immediate danger or risk of potentially fatal injury.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, indicates situations or

conditions that could result in injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, indicates situations

or conditions that could result in damage to property and/or the environment.

9

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no

user-replaceable parts.

This symbol indicates additional information on the operation

of the product.

SAFETY INSTRUCTIONS

HAZARD:

1. Do not open the device and do not perform any modiﬁcations.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and unplug it from

the power source. The device may be repaired only by authorised repair technici-

ans.

3. For devices of protection class 1, the protective conductor must be connected

correctly. Never disconnect the protective conductor. Devices of protection class 2

do not have a protective conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device may not be operated if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the device's power cable is damaged, the device may not be used.

4. Permanently connected power cables may only be replaced by a qualiﬁed person.

10

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

CAUTION:

1. Do not switch on the device if it has been exposed to extreme temperature ﬂuctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached room temperature.

2. Ensure that the voltage and frequency of the mains supply match the values spe-

ciﬁed on the device. If the device has a voltage selector switch, do not connect the

device until it has been set correctly. Use only suitable power cables.

3. To disconnect the device from the mains on all poles, it is not sufﬁcient to press the

on/off switch on the device.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Ensure that suitable measures have been taken against overvoltage (e.g. lightning

strikes).

6. Observe the speciﬁed maximum output current on devices with a Power Out

connection. Ensure that the total current consumption of all connected devices

does not exceed the speciﬁed value.

7. Replace plug-in power cables with original cables only.

HAZARD:

1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons

(including children) with reduced physical, sensory or mental capabilities.

2. Risk of falling! Make sure that the device is securely installed and will not fall

down. Only use suitable stands or mounts (particularly for ﬁxed installations).

Ensure that accessories are properly installed and secured. Ensure that applicable

safety regulations are observed.

WARNING:

1. Use the device in the prescribed manner only.

2. Operate the device using only accessories of the type recommended and supplied

by the manufacturer.

3. Observe safety regulations applicable in your country during installation.

4. After connecting the device, ensure that all cables are routed so as to avoid dama-

ge or accidents, such as from tripping.

5. Always observe the speciﬁed minimum distance to normally ﬂammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

11

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

CAUTION:

1. Moving components such as mounting brackets may become jammed.

2. In the case of devices with motor-driven components, there is a risk of injury due

to the movement of the device. Sudden movement of the device can cause shock

reactions.

3. The housing surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

device to cool sufﬁciently before removal, maintenance work and charging etc.

ATTENTION:

1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or

other heat sources. Ensure that the device is always installed in such a way that it

is sufﬁciently cooled and cannot overheat.

2. Do not place any ignition sources, such as burning candles, near the device.

3. Ventilation openings must not be covered and fans must not be blocked.

4. For transport, use the original packaging or packaging provided by the manufactu-

rer.

5. Avoid any impacts to or shaking of the device.

6. Observe the IP rating and the ambient conditions such as temperature and humidi-

ty according to the speciﬁcations.

7. Devices can be continuously further developed. In the event of deviating informa-

tion on operating conditions, performance or other device properties between the

user manual and the device labelling, the information on the device always has

priority.

8. The device is not suitable for tropical climate zones or for operation over 2,000 m

above sea level.

9. Unless explicitly stated, the device is not suitable for operation under marine

conditions.

PLEASE NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

12

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

4. Permanently installed lamps are built into these lighting units. These may not be

replaced by the user. The lamps contained in this lighting unit may only be replaced

by the manufacturer, its service partner, or a similarly qualiﬁed person.

NOTES ON PORTABLE OUTDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed for temporary

operation.

2. Continuous operation or permanent structural installation – particularly outdoors –

can impair the function, surfaces and seals and accelerate material fatigue.

3. Damage to the surface coating can impair the device's corrosion protection. Dama-

ged surface coating

(e.g. scratches) must be promptly repaired by suitable measures.

INCLUDED

Remove the product from the packaging and remove all packaging material.

Please check the completeness and integrity of the delivery and notify your distribution partner

immediately after purchase if the delivery is not complete or if it is damaged.

Product includes:

X1x S4 Softlight spotlight

X1x U-bracket (pre-assembled)

X1x Omega double bracket

X1x standard diffuser disc (pre-assembled)

X1x 28 mm TV spigot incl. M10 ﬁxing screw plus Belleville spring and washer

X1x power cable

XUser manual

INTRODUCTION

IP65 Softlight

CLS4IP

CONTROL FUNCTIONS:

1CH DIM, 2CH DIM 16bit, 2CH CCT, 4CH CCT, 3CH RGB, 4CH RGBW, 8CH RGBW 16bit, 6CH HSI-

CCT, 7CH preset, 7CH RGB-CCT, 7CH direct, 10CH direct-CCT, 10CH HSI-CCT, 16CH direct-CCT,

18CH full access, 6CH x y and 32CH pixel DMX control

DMX512

ArtNet

sACN

W-DMX™

RDM

Master / slave operation

Standalone functions

13

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

FEATURES:

Protection class IP65. RGB+WW colour spectrum. 544 0.5 W LEDs per colour (4 x 544). DMX512.

ArtNet sACN. W-DMX™. 5-pin DMX connections. RJ45 connectors. Blackout button. Button with

direct access to CCT mode. 2 freely assignable user buttons. U-bracket and 28 mm TV spigot

included. One standard diffuser disc included. Wide range of optional accessories.

The spotlight features the RDM standard (Remote Device Management). Remote device

management allows the user to view the status and configuration of RDM terminals via an RDM-

capable controller. Cameo UNICON also provides access to the entire spotlight menu.

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

S4 IP

Cameo ® is a brand of the Adam Hall Group · Adam-Hall-Str.1· 61267 Neu-Anspach ·

Germany · www.adamhall.com Designed and Engineered in Germany. Assembled in PRC.

Adam Hall Ltd. The Seedbed Business Centre SS3 9QY Essex | United Kingdom

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) This device must

accept any interference received, including interference that may cause undesired operation.

CONFORMS TO UL STD 1598

CERTIFIED TO CSA STD C22.2 N0.250

CAN ICES-003(B) / NMB-003(B)

No User-replaceable Parts inside!

Product name: SP4 IP

Product key: CLS4IP

Power consumption: max. 472 W

Operating voltage: 100-240 V AC 50-60 Hz

Protection: IP 65

Ta = -15° C - 45° C

FCC-ID: 2AFF6-PI4SLC

IC ID: 22349-PI4SLC

MAX. LOAD OF OUTLET: 7.3A

MAX. CHARGE DE SORTIE: 7.3A

WEIGHT: 17.5 kg

10 11

12 13

6

4

5

3

12

71514

16

1717

9

8

14

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

1 POWER IN

IP65 power input socket with rubber sealing cap (compatible with TRUE1). Operating voltage

100–240 V AC/50–60 Hz. Connection via supplied power cable (when not in use, always close

with rubber sealing cap).

2 POWER OUT

IP65 power output socket with rubber sealing cap (compatible with TRUE1). Facilitates power

supply to other CAMEO spotlights. Ensure that the total current consumption of all connected

devices does not exceed the value specified on the device in amperes (A) (when not in use,

always close with the rubber sealing cap).

3 DMX IN

Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console; when not in

use, always close with the rubber sealing cap).

4 DMX OUT

Female IP65 5-pin XLR socket for sending DMX control signal (when not in use, always close with

the rubber sealing cap).

5 DATA IN

RJ45 IP65 network connector for connection to an ArtNet or sACN network. When setting up the

network, use IP65 cables of category CAT-5e or better (always seal with the rubber sealing cap

when not in use).

6 DATA OUT

RJ45 network connection with protection class IP65 for forwarding the control signal. When

setting up the network, use IP65 cables of category CAT-5e or better (always seal with the rubber

sealing cap when not in use).

7 BATTERY IN

Male 4-pin XLR socket with IP65 protection rating for connecting external batteries (batteries

not included in delivery). A double V-mount adapter with connecting cable is optionally available

(article number CLSVMOUNTAP).

15

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

8 LC DISPLAY

The LC display shows the currently activated mode (main display), the menu items in the menu

and the numerical value or operational status in certain menu items. If there is no input for

approx. one minute, the display automatically returns to the main display. Note regarding the

main display in operating modes with external control: As soon as the control signal is interrupted,

the characters in the display begin to flash. When there is a control signal again, the flashing

stops.

9 DIM / SELECT / ENTER

Rotary-push encoder for the adjustment and control of the spotlight.

DIM – In the stand-alone modes CCT, HSI, Direct LED, Colour Coordinates, Gel, User Colour, Play

Loop and Light Simulation, the encoder has the function of the master dimmer (rotate encoder).

SELECT – Turn the encoder to SELECT the menu items on the menu level and change a value in a

menu item (e.g. DMX start address).

ENTER - 1. Press ENTER to access the menu level to select the mode. 2. You move down one

level in the menu structure. 3. You can confirm a value or status change by pressing ENTER, such

as changing the DMX start address.

10 The function of the middle push-button rotary encoder (turn and press) is shown in the

corresponding menu item in the centre of the display (centre line = turn, bottom line = press).

11 ESC

If the press function of the right push button rotary encoder is not explicitly shown at the bottom

right of the display, pressing the encoder has the function of moving up one level in the menu

structure.

12 BLACKOUT

Shortcut button with blackout function. Press the button to activate blackout. Press the button

again to deactivate blackout.

13 CCT

Shortcut button for directly calling up the stand-alone mode CCT.

14 USER 1

With a stand-alone mode, freely assignable button 1 (see menu item Settings -> User Buttons).

15 USER 2

With a stand-alone mode, freely assignable button 2 (see menu item Settings -> User Buttons).

16

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

16 W-DMX

Antenna for W-DMX™ control.

17 CARRY HANDLE

Ergonomic carrying handle for convenient transport.

OPERATION

PLEASE NOTE

When the spotlight is started, “Welcome to Cameo”, the model name and the software version

are briefly shown on the display. After this process, the spotlight is operational and the previously

activated operating mode is launched.

MAIN DISPLAY IN DMX MODE

The main display in DMX mode shows the currently set DMX start address, DMX mode and further

information (see illustration).

= DMX signal present = no DMX signal

Currently activated operating

mode

W-DMX status

DMX mode

DMX start address

Next free DMX start address

Press encoder =

Mode selection

Press encoder =

Open the main menu (Menu)

17

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

MAIN DISPLAY IN THE ARTNET OR SACN MODE

The main display in ArtNet or sACN mode shows the DMX mode, the currently set DMX start

address, the IP address and universe group and the universe (see illustration).

Currently activated operating mode

W-DMX status

DMX mode

DMX start address

IP address

Universe and Group

Press encoder =

Mode selection

Press encoder =

Open the main menu (Menu)

W-DMX™

To pair a W-DMX receiver with a W-DMX-compatible transmitter, W-DMX must be switched on

in the receiver’s settings menu under Wireless Settings (WDMX State -> On), the device must

be configured as a receiver (Operating Mode -> Receive) and the Reset command must be

executed (Receive Reset -> Yes). The receiver is now in pairing standby and waiting for a pairing

request from a transmitter. Start the pairing by selecting Link in the menu of the transmitter and

confirming; the pairing now takes place automatically. In the same way, several receivers can be

paired simultaneously or one after the other to a transmitter (e.g. for master / slave operation).

A W-DMX connection is always maintained until the connection is disconnected by means of the

Reset command in the receiver or the Unlink command in the transmitter, regardless of whether a

device has been disconnected from the power supply in the meantime.

W-DMX

deactivated

W-DMX

as receiver

activated,

not paired

W-DMX

as receiver

activated

and

paired,

Transmitter

switched off

or out of

range

W-DMX

as receiver

activated

and

paired,

no

DMX signal

W-DMX

as receiver

activated

and

paired,

DMX signal

is present

W-DMX

as trans-

mitter

with G3

standard

activated,

DMX signal

is present

W-DMX

as trans-

mitter

with G4s

standard

activated,

DMX signal

is present

W-DMX

as trans-

mitter

with G3

standard

activated,

no

DMX signal

W-DMX

as trans-

mitter

with G4s

standard

activated,

no

DMX signal

18

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

SETTING DMX START ADDRESS (DMX address)

Starting from the main display, press the right rotary-push encoder to enter the main menu.

Rotate the left encoder (SELECT) to select the menu item DMX Address (see left arrow) and

confirm by pushing the encoder (ENTER). You can now configure the DMX start address as

required by rotating the left encoder (the highest value depends on the selected DMX mode).

Confirm the entry by pressing the left encoder (ENTER), which will also automatically return you

to the main display and activate DMX mode. At the same time, the following DMX start address

(Next Free Address) is displayed for the selected start address plus channel number of the

selected DMX mode. The menu item for selecting the desired DMX mode can be reached directly

from the DMX Address menu item by pressing the middle rotary-push encoder (DMX mode); the

previously set DMX start address is automatically saved.

CONFIGURING DMX MODE

Starting from the main display, press the right rotary-push encoder to enter the main menu

(MENU). Rotate the left encoder (SELECT) to select the menu item DMX Mode (see left arrow)

and confirm by pushing the encoder (ENTER). You can now select the desired DMX mode by

turning the left encoder. Confirm the selection by pressing the left encoder (ENTER), which will

also automatically return you to the main display and activate DMX mode. The menu item for

setting the desired DMX start address can be reached directly from the DMX Mode menu item

by pressing the middle rotary-push encoder (DMX address); the previously selected DMX mode

is automatically saved. Tables with the channel assignment of the different DMX modes can be

found in these instructions under DMX CONTROL.

ENABLE EXTERNAL CONTROL BY DMX, ARTNET AND SACN

Starting from the main display, press the left push button rotary encoder to access the menu for

selecting the mode. Rotate the left encoder (SELECT) to SELECT DMX (see left arrow) and confirm

by pressing the left encoder (ENTER). The control protocol preselected in the Protocol menu item

in the main menu is now activated (DMX512 / Artnet / sACN).

To configure the two control protocols ArtNet and sACN as desired, press the right encoder

(menu), then select Protocol and confirm (Enter). Select the desired protocol, confirm, then select

the submenu items for setting and confirm again (see table).

Protocol ArtNet and sACN

Select by turning the left encoder, confirm by pressing, change value or status by turning,

confirm by pressing. Back with ESC.

Universe Setting the universe 000–255

Universe Group Setting the Universe Group 000 – 127

DMX Address Setting the DMX start address 001–512

DMX Mode Selecting the DMX mode 1CH dim ... 32CH

pixel

IP Address Setting the IP address:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

4. Set block with right encoder

Press left encoder to save (Enter)

xxx.xxx.xxx.xxx

Subnet Mask Setting the subnet mask:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

4. Set block with right encoder

Press left encoder to save (Enter)

xxx.xxx.xxx.xxx

Signal routing Forwarding the control signal via XLR Out Send to XLR

Forwarding the control signal via W-DMX Send to WDMX

Forwarding the control signal via XLR Out and

W-DMX

Send to both

Actuation via XLR with ArtNet or sACN signal

interruption

Backup by XLR

19