Netgear WN3500RP Manuale utente

350 East Plumeria Drive

San Jose, CA 95134

USA

October 2011

202-11049-01

v1.0

Universal Dual Band WiFi

Extender – Wallplug Edition

User Manual

2

Universal Dual Band WiFi Extender – Wallplug Edition

Support

Thank you for choosing NETGEAR.

After installing your device, locate the serial number on the label of your product and use it to register your product

at

https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.

NETGEAR recommends registering your product through the NETGEAR web site. For product updates and web

support, visit

http://support.netgear.com.

Phone (US & Canada only): 1-888-NETGEAR.

Phone (Other Countries): Check the list of phone numbers at

http://support.netgear.com/general/contact/default.aspx.

NETGEAR recommends that you use only the official NETGEAR support resources.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of

NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change

3

Contents

Chapter 1 Getting Started

How the Extender Works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

When to Use Your Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Buttons and Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Insert the AC Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Attach the Stand and Power Adapter Cord . . . . . . . . . . . . . . . . . . . . . . 11

Cable Equipment to the Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Install the Extender. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Position the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Extender Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Music Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Chapter 2 Extender Network Settings

Log In to the Extender . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Use NETGEAR genie After Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Add a WPS Client to the Extender WiFi Network . . . . . . . . . . . . . . . . . . . . 20

Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connect the Extender to an Existing Wireless Network . . . . . . . . . . . . . 20

Extender Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Extender IP Address Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Maintenance Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Status Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Attached Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Back Up and Manage Extender Settings . . . . . . . . . . . . . . . . . . . . . . . . 27

Set the Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Advanced Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

FastLane Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Chapter 3 Troubleshooting

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Connecting to http://www.mywifiext.net . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Joining WiFi Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

4

Universal Dual Band WiFi Extender – Desktop/Wallplug

Appendix A Supplementary Information

Factory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Technical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Appendix B Notification of Compliance

5

1

1. Getting Started

This chapter covers the following topics:

• How the Extender Works

• Hardware Features

• Install the Extender

• Position the Extender

• Extender Performance

• Music Playback

For more information about the topics covered in this manual, visit the support website at

http://support.netgear.com.

Getting Started

6

Universal Dual Band WiFi Extender – Desktop/Wallplug

How the Extender Works

The extender works like a bridge between a WiFi router and a computer or wireless device

outside the wireless router’s range. The extender has two main jobs:

1. The extend

er connects to a WiFi network.

When the extender connects wirelessly to a network, it

acts as a network client. This is

similar to how a computer connects to a network.

2. T

he extender acts as an access point for computers.

The extender has its own wireless network called NETGEAR_EXT that wireless

compute

rs can join. In its role as an access point, the extender performs tasks that

wireless routers do, such as broadcasting its network name (SSID).

The extender needs to do each of these jobs so that both ends of the bridge are in place.

The extender is halfway

between the router

and the computer.

Figure 1. Range extender in a home

When to Use Your Extender

NETGEAR recommends that you connect to the extender only when your home network

connection is poor. Because data traffic routed through the extender is inherently slower than

traffic routed directly from the network, the computer should stay on the network if the

connection is good enough. NETGEAR recommends that you connect through the extender

network only when the computer is in a “dead zone” where connection from the network is

very poor or non-existent.

Getting Started

7

Universal Dual Band WiFi Extender – Desktop/Wallplug

The extender LEDs can help you tell if the extender is correctly set up and working as it

should.

• The b

est performance is delivered when the Link Rate LED or and the

Wireless Device to Extender LED

are green.

• A worka

ble performance is delivered when the Link Rate LED is amber and the Wireless

Device to Extender LED

is green.

Hardware Features

The following sections describe the hardware features of the extender.

Package Contents

Your box should contain the items shown in the following figure.

Extender

Stand

Power adapter cord

AC plug

Figure 2. Package contents for the extender

Getting Started

8

Universal Dual Band WiFi Extender – Desktop/Wallplug

LEDs

The LEDs show how the extender is working.

WPS

Link Rate 2.4 GHz

Wireless Device to Extender

Link Rate 5 GHz

Power On/Off

Figure 3. Extender front panel

The following table describes the LEDs.

Table 1. LED Description

LED Description

Power

• On. Power is supplied to the extender.

• Of

f. Power is not supplied to the extender.

Link Rate

Indicates a 2.4 GHz or 5 GHz wireless connection between the

extender and a router. The LED turns on to indicate the type of

connection:

• Gr

een is best.

• Amber is

good.

• Red is

poor.

• Off. Not connected to router.

Wireless Device to

Extende

r

This LED is solid green when the extender is connected to a wireless

device.

WPS

This LED indicates a WPS wireless connection.

• So

lid green. There is wireless security (WPA or WPA2).

• Blin

king green. A WPS connection is in progress.

• Of

f. No wireless security.

Getting Started

9

Universal Dual Band WiFi Extender – Desktop/Wallplug

Buttons and Ports

The following figure shows the buttons and ports on the extender.

Power

WPS

Ethernet port

USB port

Reset Factory Defaults

Audio port

On/Of

Figure 4. Extender side and bottom panels.

The Power On/Off button and WPS button are on the side panel.

• Power On/Off button. Use

this button to turn on and off the extender.

• WPS button. Use

this button to connect the extender to your existing WiFi network. For

more information, see Add a WPS Client to the Extender WiFi Network on p

age 20.

The ports and Reset factory settings button are on the bottom panel.

• Audi

o port. Use the Audio port to connect the extender to your speaker.

• USB port. Use

the USB port to connect the extender to a printer.

• Res

et factory settings button. To reset the extender to its original factory settings,

insert a paper clip into the reset hole and hold it until the Power LED flashes.

• Ethe

rnet port. Use the Ethernet port on the extender to connect an Ethernet-enabled

device wirelessly to your network.

Getting Started

10

Universal Dual Band WiFi Extender – Desktop/Wallplug

Insert the AC Plug

You can use the AC plug to plug the extender directly into an outlet, or you can attach the

stand and plug in the power adapter cord (see Attach the Stand and Power Adapter Cord on

page 11).

1

2

3

Figure 5. If you want to plug the extender directly into an outlet, insert the AC plug.



To insert the AC plug:

1 Slid

e the tab on the top of the AC plug into the open position.

2 Align the AC plug with

the extender as shown.

3 Press firmly so

that the AC plug is securely attached to the extender.

You can now plug the extender into an electrical outlet.

Getting Started

11

Universal Dual Band WiFi Extender – Desktop/Wallplug

Attach the Stand and Power Adapter Cord

The extender comes with a stand and power adapter cord. You can attach them as shown if

you do not want to plug the extender directly into an outlet.

1

2

3

Figure 6. Attach the stand and the power adapter cord.



To attach the stand and power adapter cord:

1 Slide th

e stand onto the extender as shown.

2 T

urn the adapter so that you can see the side with the power adapter input.

3 Conn

ect the power adapter cord to the extender.

You can now plug the other end of the power adapter cord into an electrical outlet.

Cable Equipment to the Ports

You can connect computers or other devices to the USB port and the Ethernet port on the

extender,

CAUTION:

Do not connect the extender to a router using an Ethernet port. If you do

so, the extender does not work because it is designed to use only a WiFi

connection to the router.

Getting Started

12

Universal Dual Band WiFi Extender – Desktop/Wallplug

 To cable a computer to the extender:

1. Locate the ports on the extender.

Ethernet port

USB port

2. Use an Ethernet cable or USB cable to connect your computer the extender.

3. Plug

in the AC adapter or attach the stand and power adapter cord to the extender, and

then plug it into an electrical outlet.

If you want to log in to the extender, see Log In to the Extender on p

age 17.

 To use the extender as a one-port WiFi adapter:

1 Make su

re that the extender is connected to your existing wireless WiFi network.

2 Plug the Et

hernet cable from your Ethernet-enabled device (connected TV, Blu-ray player,

gaming console) to the Ethernet port of the extender.

Install the Extender

 To install the extender:

1 Eithe

r connect the AC plug, or attach the stand and the power adapter cord.

2 Fin

d a place to install the extender that is about halfway between the router and the

computer or wireless device that is outside of the range of the router.

DO DON’T

If you have to use a different location, see Position the Extender on page 14.

3 Power u

p the extender.

• If you co

nnected the AC plug to the extender, plug it directly into an electrical outlet.

• If you att

ached the stand and power adapter, plug the power adapter into an electrical

outlet.

Getting Started

13

Universal Dual Band WiFi Extender – Desktop/Wallplug

4 Wait until the Power LED turns green.

5 Use a co

mputer or wireless device to connect to the extender. During installation, it might be

easier to use a computer or device that is in the same room as the extender.

• F

or a wired connection, connect your computer or wireless device to the extender

with an Ethernet cable.

• F

or a wireless connection, use a WiFi network manager to find and connect to

NETGEAR_EXT (the SSID) wireless network.

Tip: You can use any WiFi network manager utility on a computer or tablet to

find and connect to the extender wireless network.

After the connection with the computer is established, the Wireless Device to Extender

LE

D

turns green.

6 On your compute

r or wireless device, launch an Internet browser.

The browser displays the genie screen.

If you do not seethe genie screen, type http://www.mywifiext.net in the address field of

your browser.

The genie scans for wireless networks in your area.

7 Follow t

he genie steps to set up the extender to work with your network and to set up your

computer or wireless device to connect to the extender network.

These steps are explained in Use NETGEAR genie After Installation on p

age 18.

Getting Started

14

Universal Dual Band WiFi Extender – Desktop/Wallplug

Position the Extender

The best connection is established when there is a clear line of sight between the extender

and the router and between the extender and the computer or wireless device. If this straight

path is blocked by a thick wall or other materials, move the extender to a different location

half-way between the computer and the router.

If the Link Rate LED is green or amber and the Wireless Device to Extender LED is green,

the e

xtender is working as expected.

 To place the extender and apply power:

1 Place the extende

r an equal distance between your router and the wireless device

located outside the range of your router.

2 Plug the extender into an electrical outlet, and wait 1 minute until the Power LED turns

green.

• If you have to

use a different location, move the extender closer to the device, but still

within the wireless range of the router.

• During

installation, you can put the extender in the same room as the router. After you

complete installation, you can move the extender to a location that is halfway between

the router and your computer, and still displaying a green link rate.

 To improve the Link Rate LED from red or amber to green:

1 If the Link Rate LED is red

, move the extender closer to the router or to a different spot

where it provides a better line of sight.

2 As

you move the extender, check the LEDs until you find a location where the Link Rate

LED is green or amber, and the Wireless Device to Extender LED

is green.

3 Y

ou might have to unplug the extender as you move it to a different location. If you do, from

the new location, power up the extender and continue to check the LEDs.

Once the LEDs show that the extender is in a good location, open a browser and go to

http:/

/www.mywifiext.net to continue the setup process.

Getting Started

15

Universal Dual Band WiFi Extender – Desktop/Wallplug

Extender Performance

The Link Rate LEDs indicate the performance of the 2.4 GHz or 5 GHz wireless connection

from the extender to a router.

• The best performance is delivered when the Link Rate LED is green.

• A workable perfo

rmance is delivered when the Link Rate LED is amber.

• A red

Link Rate LED indicates a poor connection or no connection between the extender

and the router.

• Make sure that your

Wireless Device to Extender LED is green before you check the

Link Rate LED for performance.

 To improve extender performance:

1 Move

the extender closer to the router or to a different location with a better line of sight.

2 As you mo

ve the extender, check the Link Rate and the Wireless Device to Extender LEDs

on the extender until you find a good location. These LEDs should remain solid green.

Music Playback

The extender supports the DLNA DMR function, which means you can stream your network

music and play it back through the extender audio jack.

• W

indows 7 users can use Windows Media Player (WMP) to play back music.

• And

roid phone, iPhone, or iPad users can download NETGEAR genie to play back music

(go to http://www.netgear.com/genie).

• DLNA DMR suppo

rts mp3, wave. flac, and aac file formats.

• T

he 3.5 mm stereo port supports earphones and powered speakers.

16

2

2. Extender Network Settings

This chapter covers the following topics:

• Log In to the Extender

• Add a WPS Client to the Extender WiFi Network

• Setup Menu

• Maintenance Settings

• Advanced Settings

Extender Network Settings

17

Universal Dual Band WiFi Extender – Desktop/Wallplug

Log In to the Extender

You can log in to the extender to use NETGEAR genie or to use the menu selections to view

or change the extender’s settings.

 To log in:

1. L

aunch an Internet browser such as Mozilla Firefox or Microsoft Internet Explorer.

2. In the address

field of your browser, enter http://www.mywifiext.net. You are prompted to

enter a user name and password.

If you do not see the log in prompt, make sure to include http:// wh

en you type

http://www.mywifiext.net in your browser.

3. T

ype admin for the user name. The default password is password. NETGEAR

recommends that you set a more secure password after you log in (see Set the Password

on page 23).

• If your extende

r has an Internet connection, the Firmware Upgrade screen displays

(see Upgrade the Firmware on p

age 24), and the software checks for new firmware at

the NETGEAR website.

• The S

tatus screen displays with the menu on the left. This screen shows what the

current settings are for the extender.

If you have trouble connecting:

• If you co

nnect an Ethernet cable to the extender, and launch your browser quickly, the

computer might still need a couple of minutes to recognize the Ethernet LAN connection

before you can connect.

• Make sure tha

t your Ethernet cable is securely connected to the extender and the

computer, and that the extender LAN LED is on. If the LED is not lit, reconnect the

Ethernet cable, and relaunch your Internet browser.

Extender Network Settings

18

Universal Dual Band WiFi Extender – Desktop/Wallplug

Use NETGEAR genie After Installation

NETGEAR genie can help you set up your extender to connect to a wireless network. For

information about more configuration options, see Chapter 2, Extender Network Settings.

The installation guide (included in the

package) explains how to install your extender. During

installation, when you launch your Internet browser, NETGEAR genie automatically displays.

 After installation, to use genie again:

1. Log in to the e

xtender.

Note: Once you begin using genie, you have to complete all of its steps

before you can exit.

2. Select Setup Wizard.

The software detects wireless networks in your area and displays a list:

3 Either select a network from the list, or select the Manually input my wireless SSID radio

button and type the SSID.

Extender Network Settings

19

Universal Dual Band WiFi Extender – Desktop/Wallplug

If the network is secure, you are prompted to enter the passphrase (network password):

4. Enter the password for your wireless network and click Continue.

The genie sets up a WiFi connection from the e

xtender to the router, which takes about 2

minutes. Then the following screen displays.

5. Review the settings, and make sure that they are correct. Then, click Continue.

The Device-to-Extender settings are applied, which takes about 2 minutes. Then the

f

ollowing screen displays..

6 Join the extender network with your wireless computer or device.

7. Select the

check box.

8 Click C

ontinue.

Extender Network Settings

20

Universal Dual Band WiFi Extender – Desktop/Wallplug

Add a WPS Client to the Extender WiFi Network

WPS (Wi-Fi Protected Setup) lets you join a secure WiFi network without typing its password.

Instead, you use a WPS button or enter a PIN to connect. WPS supports WPA and WPA2

wireless security.

Note: You cannot use the Push 'N' Connect WPS button on the extender

to connect the extender to your wireless network. The WPS button

on the extender can be used only to connect a computer to the

extender.

 To join the extender’s network using WPS:

1. Select Add WPS Cli

ent. The following screen displays:

2. Select a radio button.

• Push Bu

tton (recommended). Either click the button or press the WPS

button on the front of the extender.

• PIN Number.

Select the radio button, and a PIN displays.

The extender tries to find the wireless client (the computer) that is attempting to join the

network. If you are

using a WPS button, it tries for 2 minutes. If you are using a PIN, it

tries for 4 minutes.

3. Go to your wireless computer

. Use its WPS software to try to connect to the extender.

Setup Menu

Connect the Extender to an Existing Wireless Network

You can wirelessly connect the extender to your home network.

La pagina si sta caricando...

Netgear WN3500RP Manuale utente

Questo manuale è adatto anche per

Netgear WN3500RP Manuale utente

in altre lingue

Documenti correlati

Altri documenti