Tyan Thunder h2000M S3992-E Manuale utente

http://www.tyan.com

1

Thunder h2000M

///

S3992-E

Version 1.0

Copyright

this manual may be reproduced or translated without prior written consent from

TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Taro and Thunder h2000M are trademarks of TYAN Computer

Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.

Nvidia and nForce are trademarks of Nvidia Corporation.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of Novell.

Linux is a trademark of Linus Torvalds.

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

2

Table of Contents

Chapter 1: Introduction

1.1 Congratulations Page 5

1.2 Hardware Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 8

2.2 Block Diagram Page 9

2.3 Board Parts, Jumpers and Connectors Page 10

2.4 Tips on Installing Motherboard in Chassis Page 22

2.5 Installing the Processor(s) Page 23

2.6 Installing the Memory Page 28

2.7 Attaching Drive Cables Page 31

2.8 Installing Add-In Cards Page 33

2.9 Installing Optional SO-DIMM Modules Page 34

2.10 Connecting External Devices Page 35

2.11 Installing the Power Supply Page 36

2.12 Finishing Up Page 37

Chapter 3: BIOS

3.1 BIOS Setup Utility Page 39

3.2 BIOS Menu Bar Page 40

3.3 BIOS Legend Bar Page 40

3.4 BIOS Main Menu Page 42

3.5 BIOS Advanced Menu Page 43

3.6 BIOS PnP/PCI Menu Page 63

3.7 BIOS Boot Menu Page 65

3.8 BIOS Security Menu Page 69

3.9 BIOS Chipset Menu Page 70

3.10 BIOS Exit Menu Page 82

Chapter 4: Diagnostics

4.1 Beep Codes Page 83

4.2 Flash Utility Page 83

4.3 AMIBIOS Post Code Page 84

Appendix: SMDC Information Page 87

Glossary Page 89

Technical Support Page 95

http://www.tyan.com

3

Check the box contents!

The retail motherboard package should contain the following:

1x Thunder h2000M motherboard

1x 34-Pin floppy drive cable

4 x SATA cable

2 x S-ATA Power cable

1 x Ultra-DMA-100/66 IDE cable

1 x USB2.0 cable

1 x COM Port cable

1 x Thunder h2000M User’s Manual

1 x Thunder h2000M Quick Reference Guide

1 x TYAN driver CD

1 x I/O shield

2 x CPU Retention Frame and Back Plate

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

http://www.tyan.com

4

NOTE

http://www.tyan.com

5

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions available. The

Thunder h2000M (S3992-E) is a high-end server motherboard, based on the

ServerWorks BCM5780 & BCM5785 chipsets. It also includes the SMSC

SCH4307 Super I/O and SMSC EMC6D103 Hardware Monitoring chipsets.

This motherboard is designed to support up to two AMD Opteron™ Rev. F 2000

Series / Barcelona Quad core processors and DDRII 667/533 memory. The

S3992-E is ideal for CPU, memory, and network intensive applications required

in the HPC and clustering environments.

Remember to visit TYAN’s Website at http://www.tyan.com

. There you can find

information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

Processors

• Two uPGA 1207-pin ZIF sockets

• Supports up to two AMD Opteron

TM

Rev. F 2000 Series Santa Rosa Dual

core processors, and Barcelona Quad

core processors

• Supports AMD dual dynamic power

feature

• Integrated 128-bit DDRII memory

controller

Chipset

• ServerWorks BCM5780 (HT2000) +

BCM5785 (HT1000) chipsets

• SMSC SCH4307 Super I/O chip*

* S3992 and S3992-E are with

different Super I/O chips.

Memory

•

128-bit dual channel memory bus

• Total sixteen (16) 240-pin 1.8V DDRII

DIMM sockets (8 on CPU1 and 8 on

CPU2)

• Supports up to DDRII 667MHz

• Registered, ECC module supported

Integrated Video Controller

•

ATI ES1000 controller

• 32MB DDR frame buffer

Integrated Enhanced IDE

Controller

•

Single-channel master mode supports

up to two IDE devices

• Supports IDE drives and ATAPI-

compliant devices

Integrated SATA Controllers

• Supports four SATA ports at 1.5 Gb/s

with NCQ (BCM5785 Chipset)

• RAID 0/1/5/10 supported

BIOS

• AMI BIOS on 8Mbit LPC Flash ROM

• ACPI 2.0 and SRAT support

• PXE via Ethernet, USB device boot

• SMBIOS 2.3.1, BBS 1.1 compliant

• Headless Operation via serial console

redirect

• 48-bit LBA Support

http://www.tyan.com

6

System Management

•

Two (2) EMC6D103 hardware

monitoring IC

• Eight (8) 3+1 fan headers support

tachometer monitoring, six (6) of them

with smart FAN control

• Temperature and voltage monitoring

• W atchdog timer support

Expansion Slots

•

Two (2) PCI Express X16 slots (each

w/ x8 signal)

• Two (2) PCI-X 133/100MHz slots

• One (1) PCI-X 100MHz slot

• One (1) PCI 32-bit/33MHz, v2.3

compliant slot

• One (1) TYAN “TARO” SO-DIMM

socket

Integrated I/O

• One floppy connector

• One IDE connector

• Four SATA connectors

• Four USB2.0 ports (2 at rear, 2 via

cable)

• Two COM ports (1 at rear, 1 via cable)

• Tyan 2 x 9 front panel pin header

• Tyan 2 x 6 front panel pin header for

LAN/ID LED

• Tyan 2 x 7 pin header (2.0mm) for

FAN tachometer and PWM

• 2 x 25 connector for optional TYAN

IPMI SMDC

Back Panel I/O Ports

• Stacked PS/2 Mouse & Keyboard

ports

• Stacked 2 USB ports and 1 10/100

RJ45 port

• One 9-pin COM port

• One 15-pin VGA connector

• Two side-by-side RJ-45 ports

Form Factor

•

Extended ATX footprint (13” x 12”)

• EPS12V/ATX 12V universal power

connectors

Integrated LAN Controllers

•

Dual GbE LAN (from BCM 5780)

- Embedded in BCM5780

- Two 10/100/1000 RJ-45 LAN ports

w/LED

• One Intel i82551 QM fast Ethernet

controller

- One 10/100 RJ-45 LAN port w/LED

- Operating on 32bit/33MHz PCI bus

Optional Modules

•

M3291, IPMI 2.0 Remote System

Mgmt card

- Renesas H8S2167 BMC controller

- BT, KCS, Logging support

- IPMI-over-LAN

- Remote power on/off and reset

• M7901/M7902, Ultra 320 SCSI TARO

card

- Adaptec AIC-7901/7902 single/dual-

channel Ultra320 SCSI controller

- Adaptec Host RAID 0, 1, 10 supported

• M9000 SAS/SATA II TARO card

- Adaptec AIC-9405/9410 SAS

controller

- Supports up to 4-port (M9000-5) and

8-port (M9000-10) SAS & SATA running

at 3.0Gb/s

- Adaptec HostRAID 0, 1 & 10

supported

Power

•

Onboard dual 4-phase VRM

• EPS12V/SSI v3.51 (24+8) power

connectors

Regulatory

•

FCC Class B (DoC)

• European Community CE (DoC)

http://www.tyan.com

7

Chapter 2: Board Installation

Precautions: The Thunder h2000M supports SSI, EPS12V type power supplies

(24pin + 8pin) and will not operate with any other types. For proper power

supply installation procedures see page 36.

DO NOT USE ATX 2.x or ATXGES power supplies as they will damage the

board and void your warranty.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

http://www.tyan.com

8

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

The following page includes details on the vital components of this

motherboard.

http://www.tyan.com

9

2.2 - Block Diagram

Thunder h2000M (S3992-E) Block Diagram

http://www.tyan.com

10

2.3 - Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

 OPEN - Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

http://www.tyan.com

11

Jumper/Connector Function

FAN5/FAN6 4-pin Fan Connector

CPUFAN1/CPUFAN2/FAN1/

FAN2/FAN3/FAN4

4-pin Fan Connector with Speed Control

J19 IPMB Connector

J28 USB Front Panel Connector

J30/J39/J40/J41 SATA Connectors

J47 LAN & ID LED and ID Switch Connector

J49 Front Panel Header

JP1/JP2

SMDC/ASF2.0 Select Jumper

(Close 1-2) Default, support ASF 2.0

(Close 2-3) support SMDC card

JP3

VGA Enable/Disable Jumper

(Close 1-2) Default, enabled

(Close 2-3) Disabled

JP4

LAN3 Enable/Disable Jumper

(Close 1-2) Default, enabled

(Close 2-3) Disabled

JP5 (S1/S2) / JP8 (P1)

PCI-X Mode Select Jumper

(Close 1-2) Default, Based on Card

(Close 2-3) Force to run at PCI mode

(only 66 or 33 MHz)

JP7 (S1/S2) / JP9 (P1)

PCI-X Frequency Select Jumper

(Close 1-2) Default, based on Card

(Close 2-3) 100MHz or less

JP11

Clear CMOS Jumper

(Close 1-2) Default

(Close 2-3) Clear CMOS

LED1 Standby Power LED

LED2 Power On LED

J43/J46/J60 Reserved for OEM only

http://www.tyan.com

12

CPUFAN1

FAN2

FAN5

FAN1

FAN6

CPUFAN2

FAN4

FAN3

http://www.tyan.com

13

FAN1~4/CPUFAN1~2: 4-pin Fan Connector with Speed Control

CPUFAN1/FAN1~4

+1 2V

PWM

GN

D

Tachometer

1

CPUFAN2

+12V

PWM

GND

Ta c h o m e t e r

1

Use these headers to connect the cooling fans to

the motherboard to keep the system stable and

reliable.

This connector supports the tachometer monitoring

and auto fan speed control.

J13: CPUFAN2 J48: CPUFAN1 J50: FAN3

J51: FAN1 J56: FAN4 J57: FAN2

Pin 1 Pin 2 Pin 3 Pin 4

GND +12V Tachometer PWM

FAN5/FAN6: 4-pin Fan Connector

FAN5

+12V

NC

GND

Ta ch omete r

1

FAN6

+1 2V

NC

GN

D

Tachometer

1

Use these headers to connect cooling fans to the

motherboard to keep the system stable and

reliable.

J7: FAN5 J8: FAN6

Pin 1 Pin 2 Pin 3 Pin 4

GND +12V Tachometer NC

J9: COM2 Header

1

9

2 1

0

Use these pin definitions to connect a port to COM2.

Signal Pin Pin Signal

DCD 1 2 DSR

RXD 3 4 RTS

TXD 5 6 CTS

DTR 7 8 RI

GND 9 10 KEY

http://www.tyan.com

14

J18

J28

J19

http://www.tyan.com

15

J18: SMDC Connector

J33

CON25X2_M3291

1

3

5

7

9

11

13

15

17

19

21

23

25

27

29

31

33

35

37

41

43

45

47

49

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34

36

38

40

44

46

48

50

LAD0

LAD2

GND1

GND2

GND3

GND4

I2C1DA

I2C4CLK

GND6

I2C3DA

I2C2CLK

5VSB2

PWRBTN#

RSTBTN#

OEMBTN#

EXTSMI#

CPUNMI#

SIO_RXD

SIO_TXD

SIO_RTS#

SIO_CTS#

SERIRQ

GND12

SMALERTB#

LAD 1

LAD 3

LFRAME#

PCI_CLK

PCIRST#

I2C1CLK

GND5

I2C4DA

I2C3CLK

5VSB1

I2C2DA

GND7

PCIPME#

COM_TXD

COM_RXD

SOL_CTRL

GND8

COM_RTS#

COM_CTS#

SYSPWRGD

OEMGPI O

BMC_RST#

SMALERTA#

BMC_DET#

For connection with Tyan Server

Management Daughter Card (SMDC).

The SMDC connector is only compatible

with Tyan M3291 (SMDC).

J19: IPMB Pin Header

1

Pin 1 IPMB

DATA

Pin 2 GND

Pin 3 IPMB

CLK

Pin 4 NC

J28: USB Front Panel Header

1 9

2 10

Use this header to connect to front panel USB connector.

Signal Pin Pin Signal

USBPWR 1 2 USBPWR

USB3- 3 4 USB4-

USB3+ 5 6 USB4+

GND 7 8 GND

KEY 9 10 GND

http://www.tyan.com

16

J47

J49

J42

http://www.tyan.com

17

J42: SO-DIMM Socket

Connect SAS/SATA II Daughter Card (compatible with

Tyan M9000-10, M7901/7902 Ultra 320 SCSI “TARO”

card).

J47: LAN & ID LED and ID Switch Connector

1 11

2 1

2

Use these pin definitions to connect a port to LAN & ID

LED and ID Switch.

Signal Pin Pin Signal

LAN1 LED+ 1 2 LAN1 LED-

LAN2 LED+ 3 4 LAN2 LED-

LAN3 LED+ 5 6 LAN3 LED-

ID LED+ 7 8 ID LED1-

ID S/W+ 9 10 ID S/W-

NC 11 12 KEY

J49: Front Panel Header

SMbus Clock

SMbus Data

5Vsb

NMI

VCC

Reset SW+

GND

HDD LED-

HDD LED+

17

15

13

11

9

7 5

3

1

18

16

14

12

10 8 6

4 2

NC

GND

Key

WLED-

WLED+

GND

Power S/W+

Power LED-

Power LED+

The motherboard

provides one front

panel header for

electrical

connection to the

front panel

switches and

LED’s.

http://www.tyan.com

18

JP8

JP3

JP2

JP5JP1

JP4

http://www.tyan.com

19

JP1/JP2: SMDC/ASF2.0 Select Jumper

JP3: VGA Enable/Disable Jumper

1

3

(Default) - Enable VGA

1

3

Disable VGA

JP4: LAN3 Enable/Disable Jumper

1

3

(Default) - Enable LAN3 (Intel 82551)

1

3

Disable LAN3

JP5: S1/S2 PCI-X Mode Select Jumper

JP8: P1 PCI-X Mode Select Jumper

3

1

(Default) - Based on card

3

1

Force to run at PCI mode (only 66 or 33 MHz)

JP1 JP2

1

3

1

3

(Default) - Support ASF2.0

JP1 JP2

1

3

1

3

Support SMDC card

http://www.tyan.com

20

JP11

JP7

JP9

La pagina sta caricando ...

Tyan Thunder h2000M S3992-E Manuale utente

Questo manuale è adatto anche per

Tyan Thunder h2000M S3992-E Manuale utente

in altre lingue

Documenti correlati

Altri documenti