Datalogic DL9600 Viper Manuale utente

DL9600 Viper™

User’s Manual

DL9600 Viper™

User’s Manual

DL9600 Viper™

USER'S MANUAL

DATALOGIC S.p.A.

Via Candini 2

40012 - Lippo di Calderara di Reno

Bologna - Italy

DL9600 Viper™- User's Manual

Ed.: 01/2004

Datalogic reserves the right to make modifications and improvements without prior notification.

Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or

consequential damages resulting from the use of this material.

Product names mentioned herein are for identification purposes only and may be trademarks and or

registered trademarks of their respective companies.

822000063 (Rev. C)

iii

CONTENTS

REFERENCES .............................................................................................v

Conventions.................................................................................................. v

Reference Documentation ............................................................................ v

Service, Support and Warranty..................................................................... v

SAFETY REGULATIONS............................................................................vi

General Safety Rules....................................................................................vi

Laser Safety.................................................................................................vii

Radio Compliance.........................................................................................xi

FCC Compliance..........................................................................................xii

GENERAL VIEW.......................................................................................xiii

1 INTRODUCTION ..........................................................................................1

1.1 DL9600 Viper™ Terminal Description........................................................... 1

1.2 Package Contents......................................................................................... 3

1.3 Accessories................................................................................................... 4

2 CONNECTIONS ...........................................................................................5

2.1 Terminal Connection to the Host Computer.................................................. 5

2.1.1 Connection Through CC9600 Cradle............................................................ 5

2.1.2 RS232 Direct Connection.............................................................................. 5

2.1.3 RF Connection.............................................................................................. 6

2.2 Connection Cables........................................................................................ 7

3 BIOS SETUP MENU.....................................................................................8

3.1 General Information ...................................................................................... 8

3.2 Activating the Setup Procedure..................................................................... 8

3.3 Password ...................................................................................................... 9

3.4 The Setup Menu and its Configurable Items................................................. 9

3.5 Changing the Values of the Menu Items ..................................................... 10

3.6 Structure of the DL9600 Setup Pages ........................................................ 11

3.6.1 Console....................................................................................................... 11

3.6.2 Devices ....................................................................................................... 13

3.6.3 Power.......................................................................................................... 14

3.6.4 Activities...................................................................................................... 15

3.7 Exit Menu.................................................................................................... 16

3.8 Exit from the Setup Procedure.................................................................... 16

4 USE AND FUNCTIONING..........................................................................17

4.1 Terminal Startup ......................................................................................... 17

4.2 Barcode Scanning....................................................................................... 18

4.2.1 Linear Barcode Scanning............................................................................ 18

iv

4.2.2 2D Barcode Scanning ................................................................................. 19

4.3 Description of the Keys (32-key Models)..................................................... 20

4.3.1 Display Control and Power Keys................................................................. 20

4.3.2 Key Selection.............................................................................................. 21

4.3.3 Special Key Sequences .............................................................................. 22

4.4 Description of the Keys (48-key Models)..................................................... 24

4.4.1 Display Control and Power Keys................................................................. 24

4.4.2 Key Selection.............................................................................................. 25

4.4.3 Special Key Sequences .............................................................................. 26

4.5 Control Panel .............................................................................................. 28

4.6 Status Indicators ......................................................................................... 29

4.7 File Transfer................................................................................................ 29

5 MAINTENANCE .........................................................................................30

5.1 Charging the Batteries ................................................................................ 30

5.2 Replacing the Batteries............................................................................... 31

5.3 Cleaning the Terminal................................................................................. 32

6 TECHNICAL FEATURES...........................................................................33

6.1 Technical Data............................................................................................ 33

6.2 Reading Diagrams ...................................................................................... 34

GLOSSARY................................................................................................ 36

INDEX.........................................................................................................38

v

REFERENCES

CONVENTIONS

This manual uses the following conventions:

“User” refers to anyone using a DL9600 Viper™.

“Device” refers to the DL9600 Viper™.

“You” refers to the System Administrator or Technical Support person using this

manual to install, mount, operate, maintain or troubleshoot a DL9600 Viper™.

REFERENCE DOCUMENTATION

For further details refer to the Development System Manual of DS for Mobile@work.

SERVICE, SUPPORT AND WARRANTY

Datalogic provides several services as well as technical support through its website.

Log on to www.datalogic.com/services/support and click on the links

indicated for

further information including:

- Services – Warranty Extensions and Maintenance Agreements

- Support – Software Driver Downloads

- Contact Us – Listing of Datalogic Subsidiaries and Quality Partners

- Authorised Repair Centres

vi

SAFETY REGULATIONS

NOTE

Read this manual carefully before performing any type of connection

to the DL9600 Viper™ terminal.

The user is responsible for any damages caused by incorrect use of

the equipment or by inobservance of the indication supplied in this

manual.

GENERAL SAFETY RULES

− Use only the components supplied by the manufacturer for the specific DL9600

Viper™ terminal being used. The use of cradles other than those supplied with

the DL9600 Viper™ terminal or indicated in the list in the appendix could cause

serious damage to the DL9600 Viper™ terminal.

− Do not attempt to disassemble the DL9600 Viper™ terminal, as it does not

contain parts that can be repaired by the user. Any tampering will invalidate the

warranty.

− When replacing the batteries or at the end of the operative life of the DL9600

Viper™ terminal, disposal must be performed in compliance with the laws in

force.

− Do not submerge the DL9600 Viper™ terminal in liquid products.

vii

LASER SAFETY

The laser light is visible to the human eye and is emitted from the window indicated in

the figure.

This product complies with 21 CFR Subchapter J

CAUTION - CLASS

2

LASER LIGHT

WHEN OPEN

DO NOT STARE

INTO BEAM

AVOID EXPOSURE

LASER LIGHT

IS EMITTED FROM

THIS APERTURE

LASER LIGHT - DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

MAX. OUTPUT RADIATION 1.4 mW - EMITTED WAVE LENGTH 630~680 nm

EN60825-1:2001

Model No. DL9600 XXXXXX

X

i%-5k

S/N.

DATALOGIC S.P.A.

Via Candini, 2

Calderara di Reno (BO)

Italy

!

N2468

Laser output window

viii

I D F E

La luce laser è visibile

all'occhio umano e

viene emessa dalla

finestra indicata nella

figura.

Die Laserstrahlung ist für

das menschliche Auge

sichtbar und wird am

Strahlaustrittsfenster

ausgesendet (siehe Bild).

Le rayon laser est visible

à l'oeil nu et il est émis

par la fenêtre désignée

sur l'illustration dans la

figure.

La luz láser es visible al

ojo humano y es emitida

por la ventana indicada

en la figura.

LUCE LASER

NON FISSARE IL FASCIO

APPARECCHIO LASER DI

CLASSE 2

MINIMA POTENZA DI

USCITA:

LUNGHEZZA D'ONDA

EMESSA:

CONFORME A EN 60825-1

(2001)

LASERSTRAHLUNG

NICHT IN DER STRAHL

BLINKEN

PRODUKT DER

LASERKLASSE 2

MAXIMALE

AUSGANGLEISTUNG:

WELLENLÄNGE:

ENTSPR. EN 60825-1

(2001)

RAYON LASER

EVITER DE REGARDER

LE RAYON

APPAREIL LASER DE

CLASSE 2

PUISSANCE DE SORTIE:

LONGUER D'ONDE EMISE:

CONFORME A EN 60825-1

(2001)

RAYO LÁSER

NO MIRAR FIJO EL RAYO

APARATO LÁSER DE

CLASE 2

MÁXIMA POTENCIA DE

SALIDA:

LONGITUD DE ONDA

EMITIDA:

CONFORME A EN 60825-1

(2001)

ENGLISH

The following information is provided to comply with the rules imposed by

international authorities and refers to the correct use of your terminal.

STANDARD LASER SAFETY REGULATIONS

This product conforms to the applicable requirements of both CDRH 21 CFR 1040

and EN 60825-1 at the date of manufacture.

For installation, use and maintenance, it is not necessary to open the device.

CAUTION

Use of controls or adjustments or performance of procedures other

than those specified herein may result in exposure to hazardous

visible laser light.

The product utilizes a low-power laser diode. Although staring directly at the laser

beam momentarily causes no known biological damage, avoid staring at the beam as

one would with any very strong light source, such as the sun. Avoid that the laser

beam hits the eye of an observer, even through reflective surfaces such as mirrors,

etc.

ix

ITALIANO

Le seguenti informazioni vengono fornite dietro direttive delle autorità internazionali e

si riferiscono all’uso corretto del terminale.

NORMATIVE STANDARD PER LA SICUREZZA LASER

Questo prodotto risulta conforme alle normative vigenti sulla sicurezza laser alla data

di produzione: CDRH 21 CFR 1040 e EN 60825-1.

Non si rende mai necessario aprire l’appa-recchio per motivi di installazione, utilizzo

o manutenzione.

ATTENZIONE

L'utilizzo di procedure o regolazioni differenti da quelle descritte

nella documentazione può provocare un'esposizione pericolosa

a luce laser visibile.

Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni

riportati dall’occhio umano in seguito ad una esposizione di breve durata, evitare di

fissare il raggio laser così come si eviterebbe qualsiasi altra sorgente di luminosità

intensa, ad esempio il sole. Evitare inoltre di dirigere il raggio laser negli occhi di un

osservatore, anche attraverso superfici riflettenti come gli specchi.

DEUTSCH

Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von

internationalen Behörden auferlegt wurden, und sie beziehen sich auf den korrekten

Gebrauch vom Terminal.

NORM FÜR DIE LASERSICHERHEIT

Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH

21 CFR 1040 Normen für die Lasersicherheit.

Es ist nicht notwendig, das Gerät wegen Betrieb oder Installations-, und Wartungs-

arbeiten zu öffnen.

ACHTUNG

Jegliche Änderungen am Gerät sowie Vorgehensweisen, die nicht

in dieser Betriebsanleitung beschrieben werden, können ein

gefährliches Laserlicht verursachen.

Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit keine Augenschäden von

kurzen Einstrahlungen bekannt sind, sollten Sie es vermeiden für längere Zeit in den

Laserstrahl zu schauen, genauso wenig wie in starke Lichtquellen (z.B. die Sonne).

Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch

gegen reflektierende Oberflächen zu richten.

x

FRANÇAIS

Les informations suivantes sont fournies selon les règles fixées par les autorités

internationales et se refèrent à une correcte utilisation du terminal.

NORMES DE SECURITE LASER

Ce produit est conforme aux normes de sécurité laser en vigueur à sa date de

fabrication: CDRH 21 CFR 1040 et EN 60825-1.

Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation, l’utilisation ou l’entretien.

ATTENTION

L'utilisation de procédures ou réglages différents de ceux donnés

ici peut entrainer une dangereuse exposition à lumière laser

visible.

Le produit utilise une diode laser. Aucun dommage aux yeux humains n’a été

constaté à la suite d’une exposition au rayon laser. Eviter de regarder fixement le

rayon, comme toute autre source lumineuse intense telle que le soleil. Eviter aussi

de diriger le rayon vers les yeux d’un observateur, même à travers des surfaces

réfléchissantes (miroirs, par exemple).

ESPAÑOL

Las informaciones siguientes son presentadas en conformidad con las disposiciones

de las autoridades internacionales y se refieren al uso correcto del terminal.

NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER

Este aparato resulta conforme a las normativas vigentes de seguridad láser a la

fecha de producción: CDRH 21 CFR 1040 y EN 60825-1.

No es necesario abrir el aparato para la instalación, la utilización o la manutención.

ATENCIÓN

La utilización de procedimientos o regulaciones diferentes de

aquellas describidas en la documentción puede causar una

exposición peligrosa a la luz láser visible.

El aparato utiliza un diodo láser a baja potencia. No son notorios daños a los ojos

humanos a consecuencia de una exposición de corta duración. Eviten de mirar fijo el

rayo láser así como evitarían cualquiera otra fuente de luminosidad intensa, por

ejemplo el sol. Además, eviten de dirigir el rayo láser hacia los ojos de un

observador, también a través de superficies reflectantes como los espejos.

xi

RADIO COMPLIANCE

In radio systems configured with portable terminals and access points, the

frequencies to be used must be allowed by the spectrum authorities of the specific

country in which the installation takes place. Be absolutely sure that the system

frequencies are correctly set to be compliant with the spectrum requirements of the

country.

The Radio Card used in this product automatically adapts to the frequencies set by

the system and does not require any parameter settings.

NOTE

For RadioReady versions, the correct conformity label for your radio

model must be applied to the DL9600 Viper™ terminal to indicate

that the terminal is in conformity with the directives related to the

DL9600 Viper™/RF version.

Information for the User

ENGLISH

Contact the competent authority responsible for the management of radio frequency

devices of your country to verify the eventual necessity of a user license. Refer to the

web site http://europa.eu.int/comm/enterprise/rtte/spectr.htm

for further information.

ITALIANO

Prendi contatto con l'autorità competente per la gestione degli apparati a radio

frequenza del tuo paese, per verificarne l'eventuale necessità della licenza d'uso.

Inoltre puoi trovare ulteriori informazioni al sito:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm

.

FRANÇAIS

Contactez l'autorité compétente en la gestion des appareils à radio fréquence de

votre pays pour vérifier la nécessité du permis d'usage. Pour tout renseignement

vous pouvez vous adresser au site web:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm

.

DEUTSCH

Um die Notwendigkeit der Verwendungslizenz zu prüfen, wenden Sie sich an die

Behörde, die auf der Radiofrequenzgerätsführung Ihres Lands bewandert ist. Weitere

Informationen sind verfügbar auf dem Web Site:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm

.

xii

ESPAÑOL

Contacta con la autoridad competente para la gestión de los dispositivos de radio

frecuencia de tu país, para verificar si es necesario la licencia de uso. Además se

puede encontrar mas información en el sitio web:

http://europa.eu.int/comm/enterprise/rtte/spectr.htm

.

FCC COMPLIANCE

This compliance refers only to the DL9600 Viper™ batch version.

This device complies with PART 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference which may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

xiii

GENERAL VIEW

Key:

A) Good Read LED

B) Keyboard status/Battery low LED

C) Display

D) Charging status LED

E) Keyboard

F) Connector for direct RS232 connection and battery charging

G) Laser beam output window

H) Recharge contacts for CC9600 cradle

I) Trigger

J) IrDA port

A

B

C

D

E

F

G

H

I

J

xiv

INTRODUCTION

1

1 INTRODUCTION

1.1 DL9600 VIPER™ TERMINAL DESCRIPTION

Belonging to the Datalogic Mobile@work™ family of rugged portable terminals, the

DL9600 Viper™ is a powerful pistol grip terminal, based on PC-like architecture and

RadioReady concept. Viper™ has been conceived to match the demanding

requirements of harsh environments found in industrial applications, with no

compromises in terms of reliability and robustness. For this reason its state-of-the-art

technology is completely protected from mechanical shocks and sealed against water

and dust penetration.

Built to be an open system, Viper™ supports the most widespread mobile standards,

such as IEEE 802.11b and OpenAir, depending on the PC card used making

communication management extremely straightforward in both new and existing

installations.

The various laser scanning models offer excellent reading features including a 2D

code model that is optimized for aggressive performance on high-density PDF417

labels, RSS and other 2-D symbols including Composite Codes, and Micro PDF.

Furthermore, an innovative user interface, featuring one of the largest LCD display in

existence on a pistol grip terminal, 1/4 VGA, and a spacious, intuitive keyboard,

improves efficiency at the point of data collection.

In order to maximize functionality, Viper™ has been developed to be modular:

batteries, keyboard, scanning engine and WLAN can be shaped to meet all the

requirements of the application.

Since industrial environments are characterized by day-long use, Viper™ has been

designed with the user in mind: lightweight and well balanced together with a hand-

fitting shape provide the best user comfort in its product class.

Communication management to the legacy system takes advantage of the new

software product line that includes terminal emulation connectivity for OS/400, Unix,

Microsoft Windows platforms, including the most used ERPs, such as SAP R/3.

Viper™ is fully supported by the Mobile@work™ CD-ROM containing a vast

assortment of Software Development Tools and Utility Programs included in the

package.

DL9600 VIPER™

2

1

Key:

A) Good Read LED

B) Keyboard status/Battery low LED

C) Display

D) Charging status LED

E) Keyboard

F) Connector for direct RS232 connection and battery charging

G) Laser beam output window

H) Recharge contacts for CC9600 cradle

I) Trigger

J) IrDA port

A

B

C

D

E

F

G

H

I

J

INTRODUCTION

3

1

1.2 PACKAGE CONTENTS

The DL9600 terminal package contains:

− 1 DL9600 terminal;

− 1 user’s manual and attached documentation;

− 1 CD-ROM Mobile@work containing Software Development System and Utility

programs

− 1 rechargeable battery pack;

− Models including terminal emulation software may also include terminal-specific

keyboard overlays.

Any other packages will contain the accessories necessary for the DL9600 terminal

connection to the host computer and to the network: the cradle, power supply, and

one or more connection cables.

Remove all the components from their packaging, check their integrity and congruity

with the packing documents.

CAUTION

Keep the original packaging for use when sending products to the

technical assistance center. Damage caused by improper

packaging is not covered under the warranty.

NOTE

Rechargeable battery packs are not initially charged. Therefore the

first operation to perform is to charge them. See paragraph 5.1.

DL9600 VIPER™

4

1

1.3 ACCESSORIES

 Cradle

94A154841 CC9600 Transceiver charger

Battery charger and optical transceiver for connections between terminal and

host computer in RS232 and RS485.

 Charger

94A154840 MBC9600 multi-slot battery charger (4 slots)

 Batteries

94ACC4661 B-9600 LI BATTERY PACK 1800 [email protected] V

94ACC4660 B-9600 NM BATTERY PACK 1000 [email protected] V

 Software

Twin Client Terminal emulation

 Power Supply

FPS18 Power Supply for CC9600 transceiver charger, DL9600 terminal (through

CAB-4001) and for the MBC9600 multi-slot battery charge r:

94ACC4595 FPS18 power supply without cord

94ACC1150 Power cord EU 3- pin

94ACC1160 Power cord AUS 3- pin

94ACC1170 Power cord USA 3- pin

94ACC1180 Power cord UK 3- pin

 Cables

94A054300 cable for RS232 direct connection between the terminal and the PC.

It also provides a power jack for the connection to the FPS18.

94A054000 cable for RS232 between the CC9600 cradle and a PC/AT or

compatible.

94A054010 cable for RS232 between the CC9600 cradle and a PC/XT or

compatible.

94A054030 kit consisting of two cables for Eavesdrop and Modem connection

between cradle and Host.

La pagina sta caricando ...

Datalogic DL9600 Viper Manuale utente

Datalogic DL9600 Viper Manuale utente

in altre lingue

Documenti correlati

Altri documenti