Ericsson DT292 Manuale utente

?

Cover Page Graphic

Place the graphic directly on the page, do not care about

putting it in the text flow. Select Graphics > Properties

and make the following settings:

• Width: 15,4 cm (Important!)

• Height: 11,2 cm (May be smaller)

• Top: 5,3 cm (Important!)

• Left: -0,3 cm (Important!)

This text should then be hidden.

DT292

BusinessPhone Communication Platform

User Guide

BusinessPhone – Cordless phone DT2922

Welcome

EN/LZTBS 170 357 R1A

3BusinessPhone – Cordless phone DT292

Table of Contents

page

Welcome .......................................................... 4

Important .........................................................6

Description .....................................................10

Switching On/Off ............................................16

Incoming Calls ...............................................17

Outgoing Calls ...............................................20

During Calls ....................................................26

Call Forwarding ..............................................31

Information .....................................................38

Mailbox System ..............................................42

Abbreviated Numbers ....................................51

Group Facilities ..............................................55

Other Useful Facilities .....................................59

Security ..........................................................67

Least Cost Routing ........................................69

Integrated Phonebook ....................................70

System Phonebook ........................................76

Write text .......................................................78

Alternative programming for Automatic Callback,

Camp-on, Intrusion ........................................ 80

Adjustments ...................................................81

Audible Signals ..............................................89

Useful Hints ....................................................90

Installation ......................................................91

Reference ......................................................98

Troubleshooting ............................................104

Glossary .......................................................106

Index ............................................................107

Welcome

BusinessPhone – Cordless phone DT2924

Welcome

Welcome to the User Guide for the Cordless phone DT292 in the

BusinessPhone Communication Platform from Ericsson.

The BusinessPhone Communication Platform consists of

BusinessPhone Compact, BusinessPhone 50,

BusinessPhone 128i and BusinessPhone 250.

The features described in this User Guide are related to version 7.0

or higher of the BusinessPhone Communication Platform. Some

might not work in earlier versions of the system and/or might be

protected by a license package that has to be bought separately.

The User Guide describes the facilities of the BusinessPhone

Communication Platform and the Cordless phone DT292 with a

default programming. There may be some differences in the way

your phone is programmed. Please consult your system

administrator if you need further information.

The latest version of this User Guide can also be downloaded from:

http://www.ericsson.com/enterprise/

5BusinessPhone – Cordless phone DT292

Welcome

Copyright

stored in retrieval systems, or transmitted in any form or by any

means, electronic, mechanical, photocopying, recording or

otherwise, without prior written permission of the publisher except

in accordance with the following terms.

If this publication is made available on Ericsson media, Ericsson

gives its consent to downloading and printing copies of the content

provided in this file only for private use and not for redistribution. No

parts of this publication may be subject to alteration, modification

or commercial use. Ericsson will not be liable for any damages

arising from use of an illegal modified or altered publication.

Warranty

ERICSSON MAKES NO WARRANTY OF ANY KIND WITH

REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE. Ericsson shall not be

liable for errors contained herein nor for incidental or consequential

damages in connection with the furnishing, performance or use of

this material.

Declaration of Conformity

Hereby, Ericsson Enterprise AB, S-131 89 Stockholm, declares that

this telephone is in conformity with the essential requirements and

other relevant provisions of the R&TTE directive 1999/5/EC.

Details to be found at: http://www.ericsson.com/sdoc

Important

BusinessPhone – Cordless phone DT2926

Important

This section describes the information that is important to know

before you use the DT292 phone and the functions described.

Note: This User guide describes the supported BusinessPhone

Communication Platform functions together with the most

commonly used phone specific functions. All phone specific

functions are listed in the menu structure., see section “Menu

structure” on page 15.

Before using the DT292 the first time you have to charge and

connect the battery, see section “Installation” on page 91.

Coverage area

Your organisations premises is covered by a number of cells which

forms the coverage area. You can make and answer calls anywhere

within this area, outside the area you will lose contact with the system.

Company coverage:

7BusinessPhone – Cordless phone DT292

Important

PIN code

Your phone is initially provided with a pre-set PIN code (Personal

Identification Number). You should change this PIN code to a

personal PIN code to prevent misuse.

To change the PIN code

Route: Settings » PhoneLock » ChangePIN

ChangePIN

Select

¦ÜÛ Press

EnterOldPIN

: is displayed.

z ¦ÜÛ Enter the current PIN code (default 0000) and press

Either

EnterNewPIN:

or

Wrong PIN

is displayed. In the latter

case, you have entered a number that does not match the current

PIN code.

z ¦ÜÛ Enter the four digits of the new PIN code and press

RepeatNewPIN

is displayed.

z ¦ÜÛ Enter the new PIN code again and press

Either

New PIN accepted

or

Wrong New PIN

is displayed.

Note the new PIN code for future use

If you enter an incorrect new PIN code three times in a row, your

phone leaves this menu option.

In other situations, if you enter an incorrect PIN code three times in

a row, your phone is blocked and

PIN Blocked, Unblock?

is

displayed. See section “IPEI code” on page 8 to un-block your

phone.

Important

BusinessPhone – Cordless phone DT2928

IPEI code

If your phone is blocked because an incorrect PIN code has been

entered three times, you can unlock it with the IPEI code

(International Portable part Equipment Identity). After entering the

IPEI code, you must enter a new PIN code.

The IPEI code is a unique code which has been assigned to your

phone. The IPEI code can be found in the

ShowIPEI

menu.

If your phone is blocked,

PIN Blocked, Unblock?

appears. The

phone must be unblocked before it can be used again.

To display the IPEI code

Route: Information » ShowIPEI

¦ÜÛ Select

ShowIPEI

and press

Enter PIN

: is displayed.

z ¦ÜÛ Enter the PIN code for your phone (default 0000) and press

The 13-digit IPEI code is displayed.

¦ÜÛ Press to leave this menu

Note: Write down the IPEI code for future use. If you cannot

retrieve the IPEI code, please contact your system

administrator. Keep the IPEI code secret to prevent misuse

of your phone.

Un-block the DT292

¦ÜÛ Press

Backdoor:

is displayed.

z ¦ÜÛ Enter the IPEI code and press

EnterNewPIN:

is displayed.

z ¦ÜÛ Enter the four digits of the new PIN code and press

RepeatNewPIN

is displayed.

z ¦ÜÛ Enter the new PIN code again and press

Either

New PIN accepted

or

Wrong New PIN

is displayed. In the

latter case, the new PIN and the code you have just entered do not

match. If

New PIN accepted

appears, you can use the phone

again.

9BusinessPhone – Cordless phone DT292

Important

Networks (menu option)

The menu option Networks should only be used for administration

purposes by Ericsson service staff. Using this menu option may

cause a logout from the DECT/GAP network, and no further calls

will be possible.

Note: In case of a logout, the phone must be logged on

again by a service technician.

Description

BusinessPhone – Cordless phone DT29210

Description

2

1

3

4

5

6

8

7

9

10

11

12

13

14

15

16

17

18

Work 4711

07-Jul 11:32

19

11BusinessPhone – Cordless phone DT292

Description

1Volume Up

Off-hook: raise earpiece volume. See section “Adjustments” on page 81.

2Volume Down

Off-hook: lower earpiece volume. See section “Adjustments” on page 81.

3Off-hook / Yes

Answer call, accept.

4 Clear (C) / Mute

Delete latest entered digit. Backspace when editing text. Cancel a

menu option. Microphone, ringer and warning on/off, see sections

“During Calls” on page 26 and “Adjustments” on page 81.

5 Control key (up)

Scroll up through menus or name list. Move left through the

choices.

61 / Space

Space when editing text. See section “Integrated Phonebook” on

page 70.

7 Battery (rear side)

See section “Installation” on page 91.

8 Star / Pause / Text case

Insert a dial tone pause. Upper/lower case in text mode. See

section “Integrated Phonebook” on page 70.

9Microphone

10 Warning light

Ringing, message waiting, battery low, exit cover area.

11 Earpiece

Please note: The phone may retain small magnetic

articles around the earpiece region.

12 Display (3 rows)

Display at rest. Work is the network name and 132 is (your)

extension number. See section “Display info” on page 13.

13 On/Off / On-hook / No

Switch on/off, end call, one menu back. Cancel a menu option.

14 Control key (down)

Scroll down through menus, name list. Move right in choices.

Description

BusinessPhone – Cordless phone DT29212

15 Keypad

16 Hands-free

Activate hands-free speaking. See sections “Incoming Calls” on

page 17, “Outgoing Calls” on page 20 and “During Calls” on

page 26.

17 R/Message

Put call on hold (inquiry), take call off hold or enter the message

system. See section “During Calls” on page 26.

18 Accessory connectors

See section “Installation” on page 91.

19 Loudspeaker (rear side)

For hands-free speaking function. See sections “Incoming Calls” on

page 17, “Outgoing Calls” on page 20 and “During Calls” on

page 26.

13BusinessPhone – Cordless phone DT292

Description

Display info

The display gives you visual feedback on all actions that you

perform, and also textual warnings. The upper two rows are text

rows (12 possible characters in each row), showing menus that you

can access, names and numbers that you edit or dial, your phone

ID etc. The lower row displays different statuses, visualised by

icons.

The DT292 display

Signs in the text rows

> Menu pointer

Shows the menu that can be accessed by pressing the YES key.

< Number to long for display

There are more digits to the left.

- Dash

Indicates that a pause is programmed in the telephone number.

CallList icon

Marks an entry in the CallList. Three different call types are

displayed:

<- Incoming call

-> Outgoing call

X Missed call

! Exclamation Mark

Marks an unread entry in an entry list.

Description

BusinessPhone – Cordless phone DT29214

Display icons

Signal strength

On when your phone is locked to the system. The bars indicate

reception quality. Four bars indicate optimal reception.

Ringer off

Ringing signal muted or microphone off.

Key lock

Keys are locked.

Call

On when your phone is off hook and flashes during ringing.

Message

Message received.

Call info

New unanswered entry in the MissedCalls list.

Battery gauge

The battery cells are flashing sequentially when the battery is being

charged and is on when charging is completed. Indicates the

amount of talk and standby time left.

Note: An alarm sounds when there is less than 15 minutes

calling time left in the battery.

Additional display features

Depending on which network you are connected to, additional

display features are available. For example displaying of date and

time. Ask your system administrator if you require additional display

features.

15BusinessPhone – Cordless phone DT292

Description

Menu structure

The available phone specific functions and network functions can

be accessed via the DT292 menus.

L or M Press to access the on hook menu when in stand-by mode or

to access the off hook menu during a call (see below)

Navigation keys

Menu Structure

AutoKeyLock

MasterReset

Language

Settings

Find&Call

DeleteAll

Options available when “on hook”

SelectNet

Priority *

Rename

Delete

Subscribe

CallList *

MissedCalls *

LastCall *

TotalCalls

ShowIPEI

Store

Find&Edit

Edit

Delete

AddNew

AddCallList

PhoneBook

Alerts

RingVolume

DiscreetRng

RingType

Internal

External

CallBack

Message

KeySound

On

Off

PhoneLock

PowerOn

Subscript

ChangePIN

Display

Light

Contrast

Networks Information

Find&Call

CallList *

GotoDTMF *

DTMF-Long *

Options available when “off hook”

LM

Move within a menu.

.i Make selection. Move to submenu.

,| Move to previous menu.

ë

Move to idle display.

Note * Available under certain circumstances.

Alarm *

SetAlarm

AlarmOff

Vibrator

OnIfSilent

On

Off

MessageKey

Mess.KeyNo

Left/Up

Right/Down

Confirm Back

Cancel

ÜÛ

ÚÙ

ë

M

L

Switching On/Off

BusinessPhone – Cordless phone DT29216

Switching On/Off

Switch on the DT292

ÚÙ Press until the display lights up

If the phone does not switch on or the battery icon starts flashing,

the battery is low. Charge the battery. While charging you can still

use your phone.

Note: If the signal strength icon is off and the message

No network is displayed you cannot make or answer calls.

Switch off the DT292

Note: During calls, you cannot switch off your phone.

ÚÙ Press until the display turns blank

Your phone is switched off.

17BusinessPhone – Cordless phone DT292

Incoming Calls

A ringing signal indicates an incoming internal- or external call.

You can also see who has called you in the CallList.

Answer calls

The ringing type tells you whether the call is an internal, external or

call-back call and the display indicates an incoming call.

Display example:

If the number is stored in the integrated Phonebook, the associated

name is shown instead.

ÜÛ Press to answer

If you do not answer the call, the number is stored as a missed call

in the CallList. See section “CallList” on page 18.

Note: Calls can be answered at any time, no matter if you

are programming, or keying in a number etc.

Handsfree

> Press to answer the call in handsfree speaking mode

You are connected to the caller via the loudspeaker and

microphone.

InternalCall

4736

Incoming Calls

BusinessPhone – Cordless phone DT29218

End the call

ÚÙ Press

The duration time of the call is shown.

Mute ring sound or warning sound

If the phone rings or a warning sounds at an inconvenient moment

you can temporarily suppress the sound:

ë Press to turn off the ringing for the moment

The ring off icon appears.

Even with the sound off, you can still answer the call. The warning

light and hook icon keep flashing. If you do not answer the call, the

number is stored as a missed call in the CallList. To turn off the ring

sound permanently, see section “Volume control” on page 81.

Note: If you decide not to answer the call, press the NO

key. The call is rejected and there is no entry in the CallList.

CallList

The last 20 dialled numbers, missed calls and answered calls are

stored in the CallList (if supported by the network).

The different call types in the CallList are marked with the following icons:

<- Incoming call

-> Outgoing call

X Missed call

Note: An exclamation mark (

!) after an entry number

means that you have not read that entry yet.

ExternalCall

Anna

19BusinessPhone – Cordless phone DT292

Incoming Calls

When there are new unanswered calls, the call info icon is

displayed and the display shows:

ÚÙ Press if you do not want to return a call

To return a call

ÜÛ Press shortly

The CallList including dialled numbers, missed calls and answered

calls appears. Each entry in the list is displayed with a number in

the upper left corner of the display. The phone beeps if there are no

names or numbers available for redial.

L or M Scroll until you have the right number or name

ÜÛ Press to dial the selected number

Tip: If you press the C/MUTE key instead of the YES key,

you can edit the number before dialling.

You can also access the CallList via the

CallList

menu.

Route: Information » CallList

The

CallList menu is only displayed, if names or numbers are

available for returning a call.

You can permanently store the numbers from your CallList in your

integrated Phonebook. See section “Add numbers from the

CallList” on page 75.

Check

Who Called?

1 X 05-Mar

Sabrina!

Outgoing Calls

BusinessPhone – Cordless phone DT29220

Outgoing Calls

Sometimes you make a call but the person is not available.

These functions will help you in your attempts to establish contact

with the called party.

You can also make a call via the Phonebooks, see section

“Integrated Phonebook” on page 70 or “System Phonebook” on

page 76.

Make calls

z Enter either a directory number to make an internal call.

Or:

0z Enter the digit(s) for external line access and the desired

public number.

Note: Which digit to press for external line access depends

on the configuration of the system.

The display shows the entered number, for example:

ÜÛ Press when the number is correct

Your phone will go off hook and dial the number.

00535554505

La pagina sta caricando ...

Ericsson DT292 Manuale utente

Ericsson DT292 Manuale utente

in altre lingue

Documenti correlati

Altri documenti