TEAC SR-L250i Manuale del proprietario

046-R250U010-R

SR-L250i

CD Clock Radio

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

GEBRUIKSAANWIJZING

Z

Includes adapters for:

iPod nano

iPod with video

iPod with Click Wheel

iPod with color display

iPod classic

iPod mini

iPod touch

Adapters sold separately:

iPod with dock connector

Comprend des adaptateurs pour:

iPod nano

iPod avec vidéo

iPod avec Click Wheel

iPod avec écran couleur

iPod classic

iPod mini

iPod touch

Adaptateurs vendus séparément:

iPod avec connecteur pour dock

Incluye adaptadores para:

iPod nano

iPod con vídeo

iPod con rueda de clic

iPod con pantalla en color

iPod classic

iPod mini

iPod touch

Adaptadores no incluidos:

iPod con conector para base

Das Produkt enhält Adapter für:

iPod nano

iPod mit Video

iPod mit Klickrad

iPod mit Farbdisplay

iPod classic

iPod mini

iPod touch

Adapter separat verkauft:

iPod mit Dock Connector

ENGLISH FRANÇAIS

Questo apparecchio è provvisto di gli adattatori per:

iPod nano

iPod con video

iPod avec Click Wheel

iPod con schermo a colori

iPod classic

iPod mini

iPod touch

Adattatori venduti separatamente:

iPod con connettore Dock

Dit product wordt geleverd met de adapters voor:

iPod nano

iPod met video

iPod met Click Wheel

iPod met kleurendisplay

iPod classic

iPod mini

iPod touch

Adapters (los verkrijgbaar):

iPod met dockaansluiting

ESPAÑOL DEUTSCH ITALIANO

NEDERLANDS

2

IMPORTANT SAFETY

INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

11) Only use attachments/accessories specified by the

manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the

cart/apparatus combination to avoid injury from

tip-over.

13) Unplug this apparatus during lightning storms or

when unused for long periods of time.

14) Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord

or plug is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

The lightning flash with arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

ENGLISH

3

< Do not expose this apparatus to dripps or splashes.

<Do not place any objects filled with liquids, such as

vases, on the apparatus.

<Do not install this apparatus in a confined space

such as a book case or similar unit.

<The apparatus draws nominal non-operating

power from the AC outlet with its STANDBY/ON

switch in the standby position.

<The apparatus should be located close enough to

the AC outlet so that you can easily grasp the

power cord plug at any time.

<An apparatus with Class

!

construction shall be

connected to an AC outlet with a protective

grounding connection.

< Batteries (battery pack or batteries installed) shall

not be exposed to excessive heat such as sunshine,

fire or the like.

< Excessive sound pressure from earphones and

headphones can cause hearing loss.

WARNING: TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR

MOISTURE.

CAUTION

< DO NOT REMOVE THE EXTERNAL CASES OR

CABINETS TO EXPOSE THE ELECTRONICS. NO USER

SERVICEABLE PARTS ARE WITHIN!

< IF YOU ARE EXPERIENCING PROBLEMS WITH THIS

PRODUCT, CONTACT TEAC FOR A SERVICE

REFERRAL. DO NOT USE THE PRODUCT UNTIL IT

HAS BEEN REPAIRED.

< USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

4

Contents

Thank you for choosing TEAC. Read this manual carefully to get the

best performance from this unit.

Before Using the Unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Emergency Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Unit Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Listening to CD/MP3 (disc) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Listening to MP3 (USB). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Listening to CD/MP3 (disc/USB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Repeat/Shuffle Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Listening to iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Operating iPod. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Listening to an External Source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Preset Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

RDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

RDS (PTY Search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

ENGLISH

5

Read this before attempting any operations.

< As the unit may become warm during operation,

always leave sufficient space around the unit for

ventilation.

< The voltage supplied to the unit should match the

voltage as printed on the rear panel. If you are in

any doubt regarding this matter, consult an

electrician.

< Choose the installation location of your unit

carefully. Avoid placing it in direct sunlight or close

to a source of heat. Also avoid locations subject to

vibrations and excessive dust, heat, cold or

moisture.

< Do not place the unit on an amplifier/receiver.

< Do not open the cabinet as this might result in

damage to the circuitry or electrical shock. If a

foreign object should get into the unit, contact

your dealer or service company.

< When removing the power plug from the wall

outlet, always pull directly on the plug, never yank

the cord.

< Do not attempt to clean the unit with chemical

solvents as this might damage the finish. Use a

clean, dry cloth.

< Keep this manual in a safe place for future

reference.

DO NOT MOVE THE UNIT DURING PLAYBACK

During playback, the disc rotates at high speed. Do

NOT lift or move the unit during playback. Doing so

may damage the disc.

WHEN MOVING THIS UNIT

When changing places of installation or packing

the unit for moving, be sure to remove the disc and

return the disc table to its original position in the

player. Then, press the power switch to turn the

power off, and disconnect the power cord. Moving

this unit with the disc loaded may result in damage

to this unit.

Before Using the Unit

Maintenance

If the surface of the unit gets dirty, wipe with a soft

cloth or use diluted neutral cleaning liquid. Be sure

to remove any fluid completely. Do not use thinner,

benzine or alcohol as they may damage the surface

of the unit.

Beware of condensation

When the unit (or a disc) is moved from a cold to a

warm place, or used after a sudden temperature

change, there is a danger of condensation; vapor in

the air could condense on the internal mechanism,

making correct operation impossible. To prevent

this, or if this occurs, leave the unit for one or two

hours with the power turned on. The unit will

stabilize at the temperature of its surroundings.

Disposal of your old appliance

1.When this crossed-out wheeled

bin symbol is attached to a

product it means the product is

covered by the European Directive

2002/96/EC.

2. All electrical and electronic products should be

disposed of separately from the municipal waste

stream via designated collection facilities

appointed by the government or the local

authorities.

3. The correct disposal of your old appliance will

help prevent potential negative consequences for

the environment and human health.

4. For more detailed information about disposal of

your old appliance, please contact your city

office, waste disposal service or the shop where

you purchased the product.

6

< Never use such chemicals as record sprays,

antistatic sprays or fluid, benzene or thinner to

clean the discs. Such chemicals will do irreparable

damage to the disc’s plastic surface.

< Discs should be returned to their cases after use to

avoid dust and scratches that could cause the laser

pickup to “skip”.

< Do not expose discs to direct sunlight or high

humidity and temperature for extended periods.

Long exposure to high temperatures will warp the

disc.

< CD-R/CD-RW discs are more sensitive to the effects

of heat and ultraviolet rays than ordinary CDs. It is

important that they are not stored in a location

where direct sunlight will fall on them and which is

away from sources of heat such as radiators or

heat-generating electrical devices.

< Printable CD-R/CD-RW discs aren’t recommended,

as the label side might be sticky and damage the

unit.

< Do not stick papers or protective sheets on the

discs and do not use any protective coating spray.

< Use a soft oil-based felt-tipped pen to write the

information on the label side. Never use a ball-point

or hard-tipped pen, as this may cause damage to

the recorded side.

< Never use a stabilizer. Using commercially available

CD stabilizers with this unit will damage the

mechanisms and cause them to malfunction.

< Do not use irregular shape CDs (octagonal, heart-

shape, etc.). CDs of this sort can damage the unit.

< If you are in any doubt as to the care and handling

of a CD-R/CD-RW disc, read the precautions

supplied with the disc, or contact the disc

manufacturer directly.

Discs that can be played on this unit:

• Commercial audio CD’s bearing the “Compact

Disc Digital Audio” logo:

• Properly finalized CD-R/CD-RW discs.

Note:

< Depending on the quality of the disc and/or the

condition of the recording, some CD-R discs may

not be playable.

< Copy-protected discs and other discs which do not

conform to the CD standard may not play back

correctly in this player.

If you use such discs in this unit, TEAC Corporation

and its subsidiaries cannot be responsible for any

consequences or guarantee the quality of

reproduction. If you experience problems with such

non-standard discs, you should contact the

producers of the disc.

< Always load the disc with the label side up.

(Compact discs can be played or recorded only on

one side.)

< To remove a disc from its storage case, press down

on the center of the case and lift the disc out,

holding it carefully by the edges.

How to remove the disc How to hold the disc

< Should the disc become dirty, wipe the surface

radially with a soft, dry cloth. Never clean the disc

using a circular motion.

Discs

ENGLISH

7

MP3 compatibility

< This unit can play MP3 files recorded on a CD-R,

CD-RW or USB memory card.

< File names of MP3 should be alphanumeric

characters. This unit cannot display symbols and

full-size or 2 bytes-wide characters (such as

Japanese, Chinese, etc.) correctly. Also, be sure to

use the file extension “.mp3”.

< The disc must be finalized in order to play.

< The CD-ROM must be ISO 9660 compatible.

< When more than 200 files or folders are recorded

on the disc, the unit might not be able to play it

correctly.

< Mono or stereo MPEG-1 Audio Layer 3 format, 44.1

or 48 kHz, fixed bit-rate.

< Audio encoded at 128 Kbps should sound close to

regular audio CD quality. Although this player will

play lower bit-rate MP3 tracks, the sound quality

becomes noticeably worse at lower bit-rates.

Emergency Switch

If the disc cannot be ejected, remove the disc by

following procedure.

1 In the standby mode, push the emergency switch

(white switch in the hole) on the bottom of the unit.

The disc comes out.

2 Remove the disc.

3 Turn on the unit and insert the disc again.

< If “EJECT ERROR” is displayed, unplug the power

cord from the outlet and plug it again.

< If you remove the disc while the unit is turned on,

the mechanism is still stuck. In this case, press the

eject button (L) once to recover the unit.

< The emergency switch does not work when the

unit is disconnected from the AC outlet.

8

Connections

DCBA

FE

1

2

3

CAUTION:

< Switch off (standby) the power before making connections.

< Read the instructions of each component you intend to use with this unit.

< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords.

AC wall

socket

ENGLISH

9

AM loop antenna

Connect the supplied AM loop antenna to the

AM ANTENNA terminal.

Place the antenna in the direction which gives the

best reception.

AUX IN

You can connect a portable audio player to this

jack.

See page 27 for details.

PHONES

For private listening, insert the headphones plug

into this jack, and adjust the volume using the

VOLUME button.

See page 17 for details.

DC IN jack

Connect the provided AC adapter to this jack.

Then connect the AC adapter’s plug to the AC

wall socket.

< Do not use any AC adapters other than the one

included with this unit to avoid fire, electric shock,

etc. Be sure to connect the adapter to an AC wall

socket that supplies the correct voltage.

FM antenna

While in FM mode, tune in an FM station and

extend the lead to find the best position for the

reception. This antenna may need to be

repositioned if you move your unit to a new

location.

E

D

C

B

A

Battery compartment

The battery supplies a backup power to the built-

in clock and memory, when the unit is

momentarily disconnected from the AC outlet.

Battery installation

1.Loosen the lid using a coin, etc.

2.Remove the lid.

3.Insert a CR2032 lithium-ion battery with it’s

positive

+ face facing outer side.

4.Replace the lid.

Battery replacement

If the clock comes to indicate the wrong time,

replace the battery with a new one.

Precautions concerning button-shaped battery

< Be sure to insert the battery with correct positive

“+” and negative “_” polarities.

< Do not heat or disassemble battery and never

dispose of old battery by throwing them in a fire.

F

10

Unit Functions

F

G

H

J

A

C

B

D

E

I

R

B

C

F

G

H

Q

O

K

I

B C D FE G H

Q

P O MN L K J IR

A A

Speakers (Stereo)

DISPLAY

In standby mode, use this button to check the timer

on/off time.

In CD, USB or TUNER mode, if the clock is

displayed, use this button to check the current

track/elapsed playing time or frequency.

During the snooze function is working, use this

button to display the current time.

ALARM 1, ALARM 2

Hold down these buttons for more than 2 seconds

to enter the timer setting mode.

These buttons are also used to turn on or off the

timer function.

Dock connector

Before use, insert an appropriate Dock adapter in

the Dock (see page 13).

Insert an iPod mobile digital device into this dock.

USB connector

Connect your USB memory card to this connector.

If an iPod shuffle is connected to this connector, it

cannot be played.

E

D

C

B

A

Note:

To simplify explanations, instructions in this manual

refer to the names of the buttons and controls on

the front panel only. Associated controls on the

remote control will also operate similarly.

ENGLISH

11

FM/AM

In TUNER mode, press this button to select FM or

AM.

MEMORY/CLOCK ADJ

In CD or USB mode, use this button to programme

tracks.

In TUNER mode, use this button to store preset

channels into memory.

This button is also used for clock adjustment and to

set the timer.

STOP (H)

Use this button to stop playback.

PLAY/PAUSE (y/J)

Use this button to start or pause playback of iPod.

Eject (L)

Use this button to eject the disc.

TUNING/TIME (.//, ‡/°)

In TUNER mode, use these buttons to tune in a

station.

In CD or iPod mode, use these buttons to skip

tracks. Hold down this button to search for a part

of a track.

SNOOZE/DIMMER

After the TIMER ON time is reached, use this button

to turn the unit off for 5 minutes.

This button is also used for display dimming.

Display

Disc slot

VOLUME

Press these buttons to adjust the volume level.

Remote sensor

When operating the remote control unit, point it

towards here.

Standby/on ( )

Use this button to turn the unit on or standby.

Q

P

O

N

M

L

K

J

I

H

G

F

FUNCTION

Use these buttons to select the source you want to

listen to.

PRESET/SCROLL/FOLDER (‡/°)

In TUNER mode, use these buttons to select a

preset station.

In iPod mode, use these buttons to scroll up and

down the menu.

MENU

Use this button to go back to the previous menu.

BASS

Use this button to enter bass level adjustment

mode.

SLEEP

Use this button to set sleep timer.

MP3/RDS

In FM TUNER mode, use this button to select an

RDS mode.

During playback of MP3 disc or USB memory card,

use this button to display the current folder

name/file name, title, folder number/file number.

INTRO/PTY

In CD or USB mode, use this button for intro

playback.

In FM TUNER mode, use this button to select a

programme type for RDS.

FM MODE/PLAY MODE

In FM TUNER mode, use this button to select stereo

or monaural.

In CD or USB mode, use this button to select repeat

or shuffle playback.

SELECT

Use this button to confirm selection in menus.

TREBLE

Use this button to enter treble level adjustment

mode.

MUTING

Use this button to mute the sound.

J

I

H

G

F

E

D

C

B

A

R

12

Lights in repeat or shuffle mode.

Lights when the timer is on.

Lights during CD, USB or iPod playback.

When the unit is on, one of these indicators lights to show the current

source.

Lights in programme mode or preset tuning mode.

Lights during muting.

Lights when an FM stereo broadcast is tuned.

Lights when the sleep function is active.

Shows the digital clock, frequency, elapsed time sleep time or preset

channels, etc.

Lights when an FM RDS broadcast is tuned.

Lights when the MP3 CD is loaded.

K

J

I

H

G

F

E

D

C

B

A

Display

D

B

C

FE

H

G

I

A

JK

ENGLISH

13

Getting Started

The SR-L250i comes mounted with an adapter “60GB

(color) + Photo 40/60GB”. To play your iPod through

the SR-L250i, you have first to check if the factory

mounted adapter fits your model of iPod. If it does

not, you have to replace it with a correct one, as

explained below.

1. Remove the adapter from the Dock of the SR-

L250i.

Hold the left and right sides of the adapter and

gently pull it up.

2. Choose the Dock adapter that fits your iPod

mobile digital device.

“nano” for iPod nano 1st and 2nd generations.

“nano 3G” for iPod nano 3rd generation.

“60GB (color) + Photo 40GB/60GB” for iPod with

Click Wheel (40 GB), iPod with color display, iPod

with video (60 GB) and iPod classic (160 GB).

“20GB + U2” for iPod with Click Wheel (20 GB, U2

Special Edition), iPod with video (30 GB) and iPod

classic (80 GB).

“mini” for iPod mini.

“iPod touch” for iPod touch.

< Use a commercially available adapter to play iPod

with Dock connector.

3. Insert the adapter into the Dock of the SR-

L250i.

Fit the front edge of the adapter into the Dock, and

then press the back edge of the adapter onto the

Dock until a slight “click” is heard indicating the

adapter is inserted correctly.

< When you need to remove the adapter, hold the

left and right sides of the adapter and gently pull it

up.

Compatible iPod Software

In case your iPod will not work with the SR-L250i or

with the remote control unit, software update may

solve the problem.

Visit the Apple website and download the latest

iPod Software.

http://www.apple.com/ipod/download/

iPod is a trademark of Apple Computer, Inc.,

registered in the U.S. and other countries.

1

2

14

Remote Control Unit

The provided remote control unit allows the unit to be

operated from a distance.

When operating the remote control unit, point it

towards the remote sensor on the front panel of the

unit.

< Even if the remote control unit is operated within

the effective range (5 m), remote control operation

may be impossible if there are any obstacles

between the unit and the remote control unit.

< If the remote control unit is operated near other

products which generate infrared rays, or if other

remote control devices using infrared rays are used

near the unit, it may operate incorrectly. Conversely,

the other products may operate incorrectly.

Battery installation

1. Remove the battery compartment cover.

2. Insert two “AAA” (R03 or UM-4) dry batteries.

Make sure that the batteries are inserted with their

positive “

+ ” and negative “_ ” polarities

positioned correctly.

3. Close the cover.

Battery replacement

If the distance required between the remote control

unit and main unit decreases, the batteries are

exhausted. In this case replace the batteries with

new ones.

Precautions concerning batteries

< Be sure to insert the batteries with correct positive

“+” and negative “_” polarities.

< Use batteries of the same type. Never use different

types of batteries together.

< Rechargeable and non-rechargeable batteries can

be used. Refer to the precautions on their labels.

< When the remote control unit is not to be used for

a long time (more than a month), remove the

batteries from the remote control unit to prevent

them from leaking. If they leak, wipe away the

liquid inside the battery compartment and replace

the batteries with new ones.

< Do not heat or disassemble batteries and never

dispose of old batteries by throwing them in a fire.

ENGLISH

15

Press the CLOCK ADJ button.

The “minute” value blinks.

Press the SKIP button (. or /) to set the

current minute.

Press the CLOCK ADJ button.

The clock starts.

6

5

4

Setting the Clock

< In CD, USB or TUNER mode, if current track/elapsed

playing time or frequency are displayed, press the

DISPLAY button once to display the clock.

Press the CLOCK ADJ button.

“12 HR” or “24 HR” blinks on the display. If you

want to change the hour mode, press the . or

/ button.

< When no button is pressed for 8 seconds, the timer

setting mode will be cancelled.

Press the CLOCK ADJ button again.

The “hour” value blinks.

Press the SKIP button (. or /) to set the

current hour.

3

2

1

MEMORY/CLOCK ADJ

/

16

Basic Operation

Press the button to turn the unit on.

< The unit turns on with the source that was last

selected. If the iPod that is in playback mode is

inserted into the Dock, the SR-L250i will

automatically turn on and start playback of the

iPod.

< If you insert the disc in standby mode, the SR-L250i

will automatically turn on and start disc playback.

Press the FUNCTION button to select a source.

< To listen to an external source connected to the

AUX IN jack, select AUX.

< If you select “iPod” when no iPod is docked, the

iPod indicator on the display blinks.

Play the source, and adjust the volume using

the VOLUME button (– or +).

The volume is adjustable from MIN (0) to MAX (40).

Hold down the VOLUME – or + button to turn

down or up the volume continuously.

3

2

1

2 31

Dimmer

You can change the front panel’s display

brightness. Use the DIMMER button to change the

brightness among three levels.

< This function will be cancelled when the

button is pressed.

Muting

To mute the sound temporarily, press the MUTING

button. Press the MUTING button again to restore

the sound.

< The MUTING indicator lights on the display to

indicate that the muting is engaged.

< If you change the volume or source during the

muting, the muting will be cancelled.

ENGLISH

17

Adjusting the bass and treble sound

You can change the bass and treble sound between

“–5” to “+5”.

Press the BASS or TREBLE button. And then press

the VOLUME button (– or +) to adjust the sound

level within 3 seconds.

Headphones

Insert the headphones plug into the PHONES jack,

and adjust the volume.

CAUTION

Always lower the volume level prior to plugging in

your headphones. TO AVOID DAMAGING YOUR

HEARING - Do not place your headphones on your

head until after you have plugged them in.

Sleep timer

Each press of the SLEEP button permits setting an

interval (from 90 down to 10 minutes). The unit will

automatically turn off and then into Standby mode.

Each press of the SLEEP button changes the time

indication by 10 minutes.

< When you want to check remaining time, press the

SLEEP button once.

< If you press the SLEEP button twice, the sleep timer

is cancelled.

Lighting-up the display window in

standby mode

To light up the display window in standby mode,

press the SNOOZE/DIMMER button.

The display window is lit for 20 seconds.

< The display window is lit with the highest

brightness regardless the setting of dimmer.

90 80 10

………

OFF

18

Listening to CD/MP3 (disc)

1 2 3

Press the FUNCTION button to select “CD”.

Insert a disc with the printed label face up.

When you insert the disc in each function, the SR-

L250i will switch the function to “CD” and starts

playback.

< Do not push the disc forcibly.

< Do not insert more than one disc.

< Do not attach adhesive label, etc. to either side of

discs, as doing so may cause malfunction.

< Do not use irregular-shaped discs.

2

1

< It takes a few seconds for the unit to load the disc.

No buttons will work during loading. Wait until the

total number of the tracks and the total playing

time of the disc are displayed.

< When no disc is loaded in the CD player, “NO

DISC” is displayed.

When a CD is loaded

total tracks total playing time

When a MP3 disc is loaded

total number of folders total tracks

Press the PLAY/PAUSE button (y/J) to start

playback.

Playback starts from the first track of the disc.

< MP3 tracks recorded out of folders are

automatically put in the “ROOT” folder, and

playback starts from the first track of the ROOT

folder.

< When the playback of all the tracks has finished,

the unit stops automatically.

Do not tilt the unit with a disc inserted. It may

damage the disc and cause a malfunction.

3

ENGLISH

19

Listening to MP3 (USB)

< Do NOT use a high-capacity USB hard disc with this

unit.

Press the FUNCTION button to select “USB”.

Plug your USB memory card into the USB

connector.

< You can reverse steps and .

< It takes a few seconds for the unit to load the

USB memory card. No buttons will work during

loading. Wait until the total number of the tracks

and the total number of folders on the USB

memory card are displayed.

< If the USB memory comes into contact with the

iPod and/or Dock, remove the iPod and/or Dock.

< If an iPod shuffle is connected to this connector,

it cannot be played.

When a USB memory card is loaded

total number of folders total tracks

21

2

1

Press the PLAY/PAUSE button (y/J) to start

playback.

Playback starts from the first track on the USB

memory card.

< MP3 tracks recorded out of folders are

automatically put in the “ROOT” folder, and

playback starts from the first track of the ROOT

folder.

< When the playback of all the tracks has finished,

the unit stops automatically.

3

20

Listening to CD/MP3 (disc/USB)

To suspend playback temporarily

(pause mode)

Press the PLAY/PAUSE button (G /J ) during

playback. Playback stops at the current position. To

resume playback, press the PLAY/PAUSE button

(

G/J) again.

To stop playback

Press the STOP button (H) to stop playback.

/

To skip to the next or a previous

track

During playback, press the SKIP button

(.or/) repeatedly until the desired track is

found. The selected track will be played from the

beginning.

In the stop mode, press the SKIP button

(

.or/) repeatedly until the desired track is

found. Press the PLAY/PAUSE button (

G/J) to start

playback from the selected track.

< When the . button is pressed during playback,

the track being played will be played from the

beginning. To return to the beginning of the

previous track, press the

. button twice.

< During programmed playback, the next or previous

track in the program is played.

Search for a part of a track

During playback, hold down the SKIP button

(.or/) and release it when the desired part is

found.

La pagina sta caricando ...

TEAC SR-L250i Manuale del proprietario

Questo manuale è adatto anche per

TEAC SR-L250i Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti