Edirol UA-5 Getting Started

Thank you for purchasing the UA-5 USB Audio Interface.

Before using this unit, carefully read the sections entitled: “USING

THE UNIT SAFELY” and “IMPORTANT NOTES” (Getting

Started p. 2- p.4). These sections provide important information

concerning the proper operation of the unit. Additionally, in order

to feel assured that you have gained a good grasp of every feature

provided by your new unit, Getting Started should be read in its

entirety. The manual should be saved and kept on hand as a

convenient reference.

Getting Started

02897501 ’02-1-A3-31N

Getting Started

Erste Schritte

Démarrage

Operazioni preliminari

Guía de iniciación

To resize thickness, move all items on the front cover to left or right

form without the written permission of ROLAND CORPORATION.

Information

When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor

in your country as shown below.

U. S. A. / CANADA

EDIROL Corporation North

America

425 Sequoia Drive, Suite 114

Bellingham, WA 98226

U. S. A.

TEL: (360) 594-4276

FAX: (360) 594-4271

http://www.edirol.com/

AUSTRALIA

EDIROL Australia Pty. Ltd.

72 Central Avenue

Oak Flats NSW 2529

AUSTRALIA

TEL: (02) 4257 9091

http://www.edirol.com.au

EUROPE

EDIROL (Europe) Ltd.

Studio 3.4 114 Power Road

London W4 5PY

U. K.

TEL: +44 (0)20 8747 5949

FAX:+44 (0)20 8747 5948

http://www.edirol.com/europe

Deutschland

TEL: 0700 33 47 65 20

France

TEL: 0810 000 371

Italia

TEL: 02 93778329

As of January 1, 2002 (EDIROL-1)

EGYPT

Al Fanny Trading Office

9, EBN Hagar A1 Askalany Street,

ARD E1 Golf, Heliopolis,

Cairo 11341, EGYPT

TEL: 20-2-417-1828

REUNION

Maison FO - YAM Marcel

25 Rue Jules Hermann,

Chaudron - BP79 97 491

Ste Clotilde Cedex,

REUNION ISLAND

TEL: (0262) 218-429

SOUTH AFRICA

That Other Music Shop

(PTY) Ltd.

11 Melle St., Braamfontein,

Johannesbourg, SOUTH AFRICA

P.O.Box 32918, Braamfontein 2017

Johannesbourg, SOUTH AFRICA

TEL: (011) 403 4105

Paul Bothner (PTY) Ltd.

17 Werdmuller Centre,

Main Road, Claremont 7708

SOUTH AFRICA

P.O.BOX 23032, Claremont 7735,

SOUTH AFRICA

TEL: (021) 674 4030

AFRICAAFRICA

HONG KONG

Tom Lee Music Co., Ltd.

Service Division

22-32 Pun Shan Street, Tsuen

Wan, New Territories,

HONG KONG

TEL: 2415 0911

ASIA

INDIA

Rivera Digitec (India) Pvt. Ltd.

409, Nirman Kendra Mahalaxmi

Flats Compound Off. Dr. Edwin

Moses Road, Mumbai-400011,

INDIA

TEL: (022) 498 3079

CHILE

Comercial Fancy II S.A.

Rut.: 96.919.420-1

Nataniel Cox #739, 4th Floor

Santiago - Centro, CHILE

TEL: (02) 688-9540

PERU

VIDEO Broadcast S.A.

Portinari 199 (ESQ. HALS)

San Borja, Lima 41

REP. OF PERU

TEL: (01) 4758226

INDONESIA

PT Citra IntiRama

J1. Cideng Timur No. 15J-150

Jakarta Pusat

INDONESIA

TEL: (021) 6324170

MALAYSIA

BENTLEY MUSIC SDN BHD

140 & 142, Jalan Bukit Bintang

55100 Kuala Lumpur,MALAYSIA

TEL: (03) 2144-3333

PHILIPPINES

G.A. Yupangco & Co. Inc.

339 Gil J. Puyat Avenue

Makati, Metro Manila 1200,

PHILIPPINES

TEL: (02) 899 9801

KOREA

Cosmos Corporation

1461-9, Seocho-Dong,

Seocho Ku, Seoul, KOREA

TEL: (02) 3486-8855

SINGAPORE

CRISTOFORI MUSIC PTE

LTD

Blk 3014, Bedok Industrial Park E,

#02-2148, SINGAPORE 489980

TEL: 243 9555

TAIWAN

ROLAND TAIWAN

ENTERPRISE CO., LTD.

Room 5, 9fl. No. 112 Chung Shan

N.Road Sec.2, Taipei, TAIWAN,

R.O.C.

TEL: (02) 2561 3339

THAILAND

Theera Music Co. , Ltd.

330 Verng NakornKasem, Soi 2,

Bangkok 10100, THAILAND

TEL: (02) 2248821

VIETNAM

Saigon Music

138 Tran Quang Khai St.,

District 1

Ho Chi Minh City

VIETNAM

TEL: (08) 844-4068

ARGENTINA

Instrumentos Musicales S.A.

Av.Santa Fe 2055

(1123) Buenos Aires

ARGENTINA

TEL: (011) 4508-2700

BRAZIL

Roland Brasil Ltda

Rua San Jose, 780 Sala B

Parque Industrial San Jose

Cotia - Sao Paulo - SP, BRAZIL

TEL: (011) 4615 5666

NEW ZEALAND

Roland Corporation Ltd.

32 Shaddock Street, Mount Eden,

Auckland, NEW ZEALAND

TEL: (09) 3098 715

AUSTRALIA/

NEW ZEALAND

CENTRAL/LATIN

AMERICA

MEXICO

Casa Veerkamp, s.a. de c.v.

Av. Toluca No. 323, Col. Olivar

de los Padres 01780 Mexico D.F.

MEXICO

TEL: 668-0480

VENEZUELA

Musicland Digital C.A.

Av. Francisco de Miranda,

Centro Parque de Cristal, Nivel

C2 Local 20 Caracas

VENEZUELA

TEL: (212) 285-8586

URUGUAY

Todo Musica S.A.

Francisco Acuna de Figueroa 1771

C.P.: 11.800

Montevideo, URUGUAY

TEL: (02) 924-2335

DENMARK

Roland Scandinavia A/S

Nordhavnsvej 7, Postbox 880,

DK-2100 Copenhagen

DENMARK

TEL: (039)16 6200

FRANCE

Roland France SA

4, Rue Paul Henri SPAAK,

Parc de l'Esplanade, F 77 462 St.

Thibault, Lagny Cedex FRANCE

TEL: 01 600 73 500

FINLAND

Roland Scandinavia As,

Filial Finland

Lauttasaarentie 54 B

Fin-00201 Helsinki, FINLAND

TEL: (9) 682 4020

GERMANY

Roland Elektronische

Musikinstrumente HmbH.

Oststrasse 96, 22844 Norderstedt,

GERMANY

TEL: (040) 52 60090

HUNGARY

Intermusica Ltd.

Warehouse Area ‘DEPO’ Pf.83

H-2046 Torokbalint, HUNGARY

TEL: (23) 511011

AUSTRIA

Roland Austria GES.M.B.H.

Siemensstrasse 4, P.O. Box 74,

A-6063 RUM, AUSTRIA

TEL: (0512) 26 44 260

BELGIUM/HOLLAND/

LUXEMBOURG

Roland Benelux N. V.

Houtstraat 3, B-2260, Oevel

(Westerlo) BELGIUM

TEL: (014) 575811

EUROPE

GREECE

STOLLAS S.A.

Music Sound Light

155, New National Road

Patras 26442, GREECE

TEL: (061) 43-5400

IRELAND

Roland Ireland

Audio House, Belmont Court,

Donnybrook, Dublin 4.

Republic of IRELAND

TEL: (01) 2603501

ITALY

Roland Italy S. p. A.

Viale delle Industrie 8,

20020 Arese, Milano, ITALY

TEL: (02) 937-78300

NORWAY

Roland Scandinavia Avd.

Kontor Norge

Lilleakerveien 2 Postboks 95

Lilleaker N-0216 Oslo

NORWAY

TEL: 273 0074

PORTUGAL

Tecnologias Musica e Audio,

Roland Portugal, S.A.

Cais Das Pedras, 8/9-1 Dto

4050-465 PORTO

PORTUGAL

TEL: (022) 608 00 60

POLAND

P. P. H. Brzostowicz

UL. Gibraltarska 4.

PL-03664 Warszawa POLAND

TEL: (022) 679 44 19

RUSSIA

MuTek

3-Bogatyrskaya Str. 1.k.l

107 564 Moscow, RUSSIA

TEL: (095) 169 5043

SPAIN

Roland Electronics

de España, S. A.

Calle Bolivia 239, 08020

Barcelona, SPAIN

TEL: (93) 308 1000

SWITZERLAND

Roland (Switzerland) AG

Musitronic AG

Gerberstrasse 5, Postfach,

CH-4410 Liestal, SWITZERLAND

TEL: (061) 927-8383

SWEDEN

Roland Scandinavia A/S

SWEDISH SALES OFFICE

Danvik Center 28, 2 tr.

S-131 30 Nacka SWEDEN

TEL: (08) 702 0020

UKRAINE

TIC-TAC

Mira Str. 19/108

P.O. Box 180

295400 Munkachevo, UKRAINE

TEL: (03131) 414-40

UNITED KINGDOM

Roland (U.K.) Ltd.

Atlantic Close, Swansea

Enterprise Park, SWANSEA

SA7 9FJ,

UNITED KINGDOM

TEL: (01792) 700139

ROMANIA

FBS LINES

Piata Libertatii 1,

RO-4200 Gheorgheni

TEL: (066) 164-609

BAHRAIN

Moon Stores

No.16, Bab Al Bahrain Avenue,

P.O.Box 247, Manama 304,

State of BAHRAIN

TEL: 211 005

ISRAEL

Halilit P. Greenspoon &

Sons Ltd.

8 Retzif Ha’aliya Hashnya St.

Tel-Aviv-Yafo ISRAEL

TEL: (03) 6823666

JORDAN

AMMAN Trading Agency

245 Prince Mohammad St.,

Amman 1118, JORDAN

TEL: (06) 464-1200

KUWAIT

Easa Husain Al-Yousifi

Abdullah Salem Street,

Safat, KUWAIT

TEL: 243-6399

LEBANON

A. Chahine & Fils

Gerge Zeidan St., Chahine Bldg.,

Achrafieh, P.O.Box: 16-5857

Beirut, LEBANON

TEL: (01) 20-1441

CYPRUS

Radex Sound Equipment Ltd.

17, Diagorou Street, Nicosia,

CYPRUS

TEL: (02) 66-9426

IRAN

MOCO, INC.

No.41 Nike St., Dr.Shariyati Ave.,

Roberoye Cerahe Mirdamad

Tehran, IRAN

TEL: (021) 285-4169

MIDDLE EAST

QATAR

Badie Studio & Stores

P.O. Box 62,

Doha, QATAR

TEL: 423554

SAUDI ARABIA

aDawliah Universal

Electronics APL

Corniche Road, Aldossary Bldg.,

1st Floor, Alkhobar,

SAUDI ARABIA

P.O.Box 2154, Alkhobar 31952

SAUDI ARABIA

TEL: (03) 898 2081

SYRIA

Technical Light & Sound

Center

Bldg. No. 47,

Khaled Ebn Al Walid St.

Damascus, SYRIA

TEL: (011) 221-1230

TURKEY

Barkat Muzik aletleri ithalat

ve ihracat Ltd Sti

Siraselviler Caddesi Siraselviler

Pasaji No:74/20

Taksim - Istanbul, TURKEY

TEL: (0212) 2499324

U.A.E.

Zak Electronics & Musical

Instruments Co. L.L.C.

Zabeel Road, Al Sherooq Bldg.,

No. 14, Grand Floor, Dubai, U.A.E.

TEL: (04) 3360715

CHINA

Beijing Xinghai Musical

Instruments Co., Ltd.

6 Huangmuchang Chao Yang

District, Beijing, CHINA

TEL: (010) 6774 7491

Shanghai Xingtong Acoustics

Equipment CO.,Ltd.

5F. No.1500 Pingliang Road

New East Club Plaza, Shanghai,

CHINA

TEL: (021) 5580-0800

2

To resize thickness, move all items on the front cover to left or right

This product complies with the requirements of European Directive 89/336/EEC.

For EU Countries

For Canada

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

NOTICE

AVIS

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

Unauthorized changes or modification to this system can void the users authority to operate this equipment.

This equipment requires shielded interface cables in order to meet FCC class B Limit.

For the USA

DECLARATION OF CONFORMITY

Compliance Information Statement

Model Name :

Type of Equipment :

Responsible Party :

Address :

Telephone :

UA-5

USB Audio Interface

Edirol Corporation North America

425 Sequoia Drive, Suite 114, Bellingham, WA 98226

(360) 594-4276

USING THE UNIT SAFELY

001

• Before using this unit, make sure to

read the instructions below, and the

Owner’s Manual.

..................................................................................................

002c

• Do not open (or modify in any way)

the unit or its AC adaptor.

..................................................................................................

003

• Do not attempt to repair the unit, or

replace parts within it (except when

this manual provides specific instruc-

tions directing you to do so). Refer all

servicing to your retailer, the nearest

Roland Service Center, or an autho-

rized Roland distributor, as listed on

the “Information” page.

..................................................................................................

004

• Never use or store the unit in places

that are:

• Subject to temperature extremes

(e.g., direct sunlight in an enclosed

vehicle, near a heating duct, on top

of heat-generating equipment); or

are

• Damp (e.g., baths, washrooms, on

wet floors); or are

• Humid; or are

• Exposed to rain; or are

• Dusty; or are

• Subject to high levels of vibration.

007

• Make sure you always have the unit

placed so it is level and sure to remain

stable. Never place it on stands that

could wobble, or on inclined surfaces.

..................................................................................................

009

• Do not excessively twist or bend the

power cord, nor place heavy objects

on it. Doing so can damage the cord,

producing severed elements and short

circuits. Damaged cords are fire and

shock hazards!

..................................................................................................

010

• This unit, either alone or in combi-

nation with an amplifier and

headphones or speakers, may be

capable of producing sound levels that

could cause permanent hearing loss.

Do not operate for a long period of

time at a high volume level, or at a

level that is uncomfortable. If you

experience any hearing loss or ringing

in the ears, you should immediately

stop using the unit, and consult an

audiologist.

..................................................................................................

011

• Do not allow any objects (e.g.,

flammable material, coins, pins); or

liquids of any kind (water, soft drinks,

etc.) to penetrate the unit.

Used for instructions intended to alert

the user to the risk of injury or material

damage should the unit be used

improperly.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic

animals or pets.

Used for instructions intended to alert

the user to the risk of death or severe

injury should the unit be used

improperly.

The ● symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In

the case of the symbol at left, it means that the power-

cord plug must be unplugged from the outlet.

The symbol alerts the user to important instructions

or warnings.The specific meaning of the symbol is

determined by the design contained within the

triangle. In the case of the symbol at left, it is used for

general cautions, warnings, or alerts to danger.

The symbol alerts the user to items that must never

be carried out (are forbidden). The specific thing that

must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it

means that the unit must never be disassembled.

3

012c

• Immediately turn the power off,

remove the AC adaptor from the

outlet, and request servicing by your

retailer, the nearest EDIROL/Roland Service

Center, or an authorized EDIROL/Roland

distributor, as listed on the “Information”

page when:

• The AC adaptor or the power-supply cord

has been damaged; or

• Objects have fallen into, or liquid has been

spilled onto the unit; or

• The unit has been exposed to rain (or

otherwise has become wet); or

• The unit does not appear to operate

normally or exhibits a marked change in

performance.

..................................................................................................

013

• In households with small children, an

adult should provide supervision until

the child is capable of following all the rules

essential for the safe operation of the unit.

..................................................................................................

014

• Protect the unit from strong impact.

(Do not drop it!)

..................................................................................................

015

• Do not force the unit’s power-supply

cord to share an outlet with an unrea-

sonable number of other devices. Be

especially careful when using extension

cords—the total power used by all devices

you have connected to the extension cord’s

outlet must never exceed the power rating

(watts/amperes) for the extension cord.

Excessive loads can cause the insulation on

the cord to heat up and eventually melt

through.

..................................................................................................

016

• Before using the unit in a foreign

country, consult with your retailer, the

nearest Roland Service Center, or an

authorized Roland distributor, as listed on the

“Information” page.

..................................................................................................

023

• DO NOT play a CD-ROM disc on a

conventional audio CD player. The

resulting sound may be of a level that

could cause permanent hearing loss.

Damage to speakers or other system

components may result.

101b

• The unit and the AC adaptor should

be located so their location or position

does not interfere with their proper

ventilation.

..................................................................................................

102d

• Always grasp only the plug or the

body of the AC adaptor when

plugging into, or unplugging from, an

outlet or this unit.

..................................................................................................

103b

• Whenever the unit is to remain

unused for an extended period of

time, disconnect the AC adaptor.

..................................................................................................

104

• Try to prevent cords and cables from

becoming entangled. Also, all cords

and cables should be placed so they

are out of the reach of children.

..................................................................................................

106

• Never climb on top of, nor place heavy

objects on the unit.

..................................................................................................

107d

• Never handle the AC adaptor body, or

its plugs, with wet hands when

plugging into, or unplugging from, an

outlet or this unit.

..................................................................................................

108b

• Before moving the unit, disconnect the

AC adaptor and all cords coming from

external devices.

..................................................................................................

109b

• Before cleaning the unit, turn off the

power and unplug the AC adaptor

from the outlet.

..................................................................................................

110b

• Whenever you suspect the possibility

of lightning in your area, disconnect

the AC adaptor from the outlet.

..................................................................................................

118

• Should you remove the optical

connector caps, make sure to put them

in a safe place out of children's reach,

so there is no chance of them being

swallowed accidentally.

4

IMPORTANT NOTES

291a

In addition to the items listed under “USING THE UNIT SAFELY” on page 2-3, please read and

observe the following:

Power Supply

301

• Do not use this unit on the same power circuit

with any device that will generate line noise

(such as an electric motor or variable lighting

system).

302

• The AC adaptor will begin to generate heat

after long hours of consecutive use. This is

normal, and is not a cause for concern.

307

• Before connecting this unit to other devices,

turn off the power to all units. This will help

prevent malfunctions and/or damage to

speakers or other devices.

Placement

351

• Using the unit near power amplifiers (or

other equipment containing large power

transformers) may induce hum. To alleviate

the problem, change the orientation of this

unit; or move it farther away from the source

of interference.

352

• This device may interfere with radio and

television reception. Do not use this device in

the vicinity of such receivers.

354a

• Do not expose the unit to direct sunlight,

place it near devices that radiate heat, leave it

inside an enclosed vehicle, or otherwise

subject it to temperature extremes. Excessive

heat can deform or discolor the unit.

355

• To avoid possible breakdown, do not use the

unit in a wet area, such as an area exposed to

rain or other moisture.

Maintenance

401a

• For everyday cleaning wipe the unit with a

soft, dry cloth or one that has been slightly

dampened with water. To remove stubborn

dirt, use a cloth impregnated with a mild,

non-abrasive detergent. Afterwards, be sure

to wipe the unit thoroughly with a soft, dry

cloth.

402

• Never use benzine, thinners, alcohol or

solvents of any kind, to avoid the possibility

of discoloration and/or deformation.

Additional Precautions

553

• Use a reasonable amount of care when using

the unit’s buttons, sliders, or other controls;

and when using its jacks and connectors.

Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables,

grasp the connector itself—never pull on the

cable. This way you will avoid causing shorts,

or damage to the cable’s internal elements.

558a

• To avoid disturbing your neighbors, try to

keep the unit’s volume at reasonable levels.

You may prefer to use headphones, so you do

not need to be concerned about those around

you (especially when it is late at night).

559a

• When you need to transport the unit, package

it in the box (including padding) that it came

in, if possible. Otherwise, you will need to use

equivalent packaging materials.

562

• Use a cable from Roland to make the

connection. If using some other make of

connection cable, please note the following

precautions.

• Some connection cables contain resistors.

Do not use cables that incorporate resistors

for connecting to this unit. The use of such

cables can cause the sound level to be

extremely low, or impossible to hear. For

information on cable specifications, contact

the manufacturer of the cable.

564

• Before you open the included CD-ROM, you

must read the “license agreement.” Opening

the CD-ROM will be taken to mean your

acceptance of the license agreement.

Handling CD-ROMs

801

• Avoid touching or scratching the shiny

underside (encoded surface) of the disc.

Damaged or dirty CD-ROM discs may not be

read properly. Keep your discs clean using a

commercially available CD cleaner.

5

INDEX

IMPORTANT NOTES ........................................................................4

Features of the UA-5........................................................................6

Check the contents of the package................................................8

Names of things and what they do...............................................10

Getting Connected and Installing Drivers (Windows)................15

Getting Connected and Installing Drivers (Macintosh)..............34

UA-5 application guide..................................................................42

Troubleshooting.............................................................................52

Anschlsse herstellen und Treiber installieren (Windows).........66

Anschlüsse herstellen und Treiber installieren (Macintosh).....85

Hinweise zum Einsatz des UA-5...................................................93

Fehlerbehebung...........................................................................103

Installation des pilotes et connexions (Windows)....................117

Installation des pilotes et connexions (Macintosh)..................136

Guide des applications de l’UA-5...............................................144

En cas de problème.....................................................................154

Collegamenti e installazione Driver (Windows) ........................168

Collegamenti e installazione dei driver (Macintosh).................187

Guida all’uso dell’UA-5................................................................195

Ricerca e soluzione dei problemi...............................................205

Conexión e instalación de los controladores (Windows) ........219

Conexión e instalación de los controladores (Macintosh) ......238

Guía de aplicaciones del UA-5....................................................246

Resolución de problemas ...........................................................256

Main Specifications......................................................................270

* Microsoft and Windows are registered trademarks of Microsoft Corporation.

* Screen shots in this documents are reprinted with permission from Microsoft Corporation.

* Windows® 98 is known officially as: “Microsoft® Windows® 98 operating system.”

* Windows® 2000 is known officially as: “Microsoft® Windows® 2000 operating system.”

* Windows® Me is known officially as: “Microsoft® Windows® Millennium Edition operating

system.”

* Apple and Macintosh are registered trademark of Apple Computer, Inc.

* MacOS is a trademark of Apple Computer, Inc.

* All product names mentioned in this document are trademarks or registered trademarks of

their respective owners.

6

Features of the UA-5

24bit/96kHz processing High Quality Sound

The UA-5 offers a complete digital recording and playback, ready to use on both

desktop and laptop computers, with professional quality audio resolution up to 24-

bit/96 kHz. *

* 24-bit/96 kHz processing only when using ASIO or WDM driver

* Simultaneous recording/playback is 48 kHz

Wide variety of input/output connectors

UA-5 provides a wide range of input connectors (both XLR/standard type),

including Hi-Z Guitar preamp, dynamic microphone, phantom-powered

condenser MIC’s, optical & coaxial S/P DIF I/O.

Hardware Direct Monitoring function

Its unique Hardware Direct Monitoring function enables zero latency monitoring of

input signals through headphones or analog output. Built-in hardware switch to

turn on/off the monitoring function with ASIO 2.0 compatible software

applications.

ASIO 2.0 /WDM compatible driver

Dedicated drivers are compatible with WDM (Windows 2000) and ASIO 2.0 (Win/

Mac), application allowing high performance with music software such as

SONAR™, Cubase™, Logic™.

* Roland will provide no guarantee or support regarding operation with sequencer software or

audio editing software made by another manufacturer. Please contact the manufacturer of the

software you are using.

7

Features of the UA-5

What is USB?

USB stands for Universal Serial Bus. It is a new interface used to connect various

peripheral devices to a computer.

USB allows more than one peripheral device to be connected via a single USB cable,

and also allows data to be transmitted more rapidly than conventional serial ports.

Peripherals can also be connected or disconnected with the power turned on, and

the computer will automatically recognize the peripheral that has been plugged in.

(Some peripherals may require settings or other operations to be performed.)

About SCMS

SCMS (Serial Copy Management System) is a function that protects the rights of the

copyright owner by prohibiting second-generation or later copying via a digital

connection to a consumer digital audio device such as a DAT recorder or MD

recorder. When a recording is made via a digital connection on a digital recorder

that has this function, SCMS data will be recorded along with the digital audio

signal. A digital audio signal containing this SCMS data cannot be recorded again

via a digital connection.

SCMS on the UA-5

On the UA-5, SCMS will affect operation only for digital signals input from an

external device. If a digital audio signal containing SCMS data is input from a MD

or other media that was digitally copied from a commercial music CD, the UA-5

will operate as follows.

When inputting from the UA-5's digital input connector:

The UA-5 cannot record this signal on your computer.

Nor will the sound be output from the analog output (master output jacks,

headphone jack) or digital output connector. If the input is valid, the Power

indicator will blink.

When inputting from the UA-5's analog inputs (line in jacks):

Recording can be performed as usual.

A note regarding copyright

* Unauthorized recording, public performance, broadcast, sale, or distribution of a work (CD

recording, video, broadcast, etc.) whose copyright is owned by a third party is forbidden by law.

Any infringement on the rights of a third party you may commit using the UA-5 is solely your

own responsibility, and no responsibility shall be born by the manufacturer of the UA-5.

Unauthorized duplication, even for purposes of personal use, of a copyrighted work belonging to

a third party by circumventing technical means of protection such as SCMS constitutes

infringement of the copyright of that third party, and is forbidden by law.

8

Check the contents of the package

●

UA-5

fig.UA-5

●

AC adaptor

fig.03-1

This is the only AC adaptor you should use

with the UA-5. Do not use any AC adaptor

other than the supplied one, since doing so

may cause malfunction.

●

USB cable

fig.03-2

Use this to connect the USB connector of

your computer with the USB connector of

the UA-5. For details on connections and

driver installation, refer to Windows–> p. 15

or Macintosh–> p. 34

* Please use only the included USB cable. If you require a replacement due to loss or damage,

please contact a “EDIROL/Roland Service Center” listed in the “Information” section at the

end of this manual.

●

UA-5 Driver CD-ROM

fig.03-3

This contains the driver required in order to

use the UA-5.

●

Getting Started

fig.03-5e

This is the manual you are reading. Please

keep it on hand for reference.

Thank you for purchasing the UA-5 USB Audio Interface.

Before using this unit, carefully read the sections entitled: “USING

THE UNIT SAFELY” and “IMPORTANT NOTES” (Getting

Started p. 2- p.4). These sections provide important information

concerning the proper operation of the unit. Additionally, in order

to feel assured that you have gained a good grasp of every feature

provided by your new unit, Getting Started should be read in its

entirety. The manual should be saved and kept on hand as a

convenient reference.

Getting Started

Erste Schritte

Démarrage

Operazioni preliminari

Guía de iniciación

form without the written permission of ROLAND CORPORATION.

9

Check the contents of the package

●

Ferrite Core

The ferrite core should be attached to the cord of your headphones.

Attaching the Ferrite Core

Before using headphones, make sure to attach the ferrite core.

If you will be using headphones, please follow the instructions below to clamp the

supplied ferrite core over the cord. Afterwards, make sure to leave it on the cord,

since it serves in blocking electromagnetic noise.

Anbringen des Ferritkerns ................................................................................. Deutsch

Vor der Verwendung von Kopfhörern stellen Sie sicher, daß der Ferritkern angebracht ist.

Wenn Sie Kopfhörer verwenden, folgen Sie bitte den Anweisungen unten, um den

mitgelieferten Ferritkern über das Kabel zu klemmen. Anschließend stellen Sie sicher, daß er

auf dem Kabel bleibt, da er dazu dient, elektromagnetische Störungen zu blockieren.

Installation de la ferrite de protection .............................................................Français

Avant d’utiliser les écouteurs, assurez-vous que la ferrite de protection soit bien en place.

Si vous désirez utiliser les écouteurs, veuillez suivre les instructions ci-dessous pour fixer au

cordon la ferrite de protection fournie. Une fois installée, assurez-vous de la laisser en place sur

le cordon, car elle permet de bloquer les interférences électromagnétiques.

Fissaggio del nucleo in Ferrite ......................................................................... Italiano

Prima di usare le cuffie, assicuratevi di fissare il nucleo in ferrite.

In caso di utilizzo delle cuffie, seguite le istruzioni di seguito perSerrare il nucleo in ferrite

fornito sul filo. In seguito, assicuratevi di lasciarlo sul filo, perchè serve a bloccare

l'inquinamento elettromagnetico.

Fijación del núcleo de ferrita .............................................................................Español

Antes de usar los audífonos, asegúrese de fijar el núcleo de ferrita.

Si va a usar audífonos, siga las instrucciones que se indican a continuación para sujetar el núcleo

de ferrita que se incluye sobre el cable. Posteriormente, asegúrese de dejarlo en el cable, ya que

sirve para bloquear el ruido electromagnético.

1. Open the ferrite core and position it over the

cord.

* Make sure to position it so it's close to the plug.

2. Wrap the cord around the ferrite core; one

turn is enough.

3. Close it firmly; you should hear a distinct

sound as it clicks shut.

* Take care not to get your fingers pinched when

attaching the ferrite core.

* Make sure you don't apply undue force and

damage the cord when clamping on the ferrite

core.

10

Names of things and what they do

Front panel

fig.04-1

1. Input jacks 1, 2

fig.04-1ae

These are input jacks for analog audio signals. These

are combination XLR and phone jacks, allowing you to

connect either type of plug. Both balanced and

unbalanced devices can be connected. The XLR-type

connections support 48 V phantom power, allowing

phantom powered condenser mics to be connected. In

this case, turn the

Phantom power switch

on

(lit).

* Unless condenser mics requiring phantom power are connected, you must be sure to turn

the Phantom power switch

off

(dark). Supplying phantom power to a dynamic mic or audio

playback device will cause malfunction. For details on your type of mic, refer to the manual

that came with your mic. (The phantom power supply of the UA-5 is DC 48V, maximum

10mA.)

2. Input sensitivity knobs

These adjust the sensitivity of

Input jacks 1 and 2

. The jack will be at mic level (-50

dBv) when the knob is turned fully right, and at line level (0 dBv) when turned fully

left.

3 5

2

4

6

7

81

910

11

12

13

14

XLR type

P

U

S

H

Phone type

(Unbalanced)

TRS

phone type

(Balanced)

fig.04-1b

The UA-5 has balanced (XLR/TRS)

type input jacks. The pin connections

of connectors are shown below. Before

making connections, please check the

pin connections of the device you are

connecting.

1:GND

2:HOT

3:COLD

GND(SLEEVE)

HOT(TIP)

COLD(RING)

11

Names of things and what they do

3. Input impedance select switch

Depending on the device connected to

Input jack 2

, use this switch to select either

high impedance (Hi-Z) or low impedance (Lo-Z). If you are connecting a guitar or

bass to

Input jack 2

, set this switch to the high impedance setting (Hi-Z).

4. Phantom power switch

This is an on/off switch for the phantom power that is supplied to XLR-type

Input

jacks 1 and 2

.

* If devices that do not require phantom power are connected to the XLR jacks, you must turn

the Phantom power switch

off

to prevent malfunction.

5. Peak indicator

This indicator allows you to avoid distorting the audio sources connected to Input

jacks 1 and 2 and the Input jacks 3 and 4. The Peak indicator will light in red at

the level at which the sound begins to distort (-3 dB). Adjust the Input sensitivity

knobs so that the Peak indicator does not light.

6. Recording source select switch

This selects the input jack that will be sent via USB to the computer as the recording

source.

DIGITAL->

The input of the Digital input connector (coaxial or optical) will be sent to the

computer. Use the Digital input selector select to select the jack that will be used

for digital input.

ANALOG->

The analog audio signals being input to Input jacks 1 and 2 and the Input jacks 3

and 4 will be sent to the computer. The audio signals from Input jacks 1 and 2 that

have passed through the Input sensitivity knob, together with the analog audio

signals from the Input jacks 3 and 4 that have passed through the Input jacks 3

and 4 adjustment volume, will be sent as audio data to the computer. For details

refer to the Block diagram (p. 14).

7. Sampling frequency select switch

This selects the Sampling frequency at which audio signals will be recorded and

played back. In order for this setting to take effect, you must exit all applications,

then switch the UA-5's power off, then on again.

About the Sampling frequency select switch setting

• The UA-5’s Sampling frequency select switch must be set to match the

sampling frequency of the application you are using.

• 96 kHz REC and 96 kHz PLAY are valid only in Advanced mode (when

the Mode select switch is ON).

• When the Sampling frequency select switch is in the 96 kHz REC

position, you will not hear the playback sound from your application.

• When the Sampling frequency select switch is in the 96 kHz PLAY

position, the sound from the instrument or audio device connected to the

UA-5 cannot be recorded by your application.

12

Names of things and what they do

fig.04-1

8. Input monitor stereo/mono select button

This button selects whether the input signal from the Input jacks 1 and 2, Input

jacks 3 and 4, and the Digital input connector will be monitored in stereo or in

MONO. You should also set this to MONO when you are connecting a guitar to only

Input jack 2.

Even when this is set to Mono, the audio signal sent via USB to the computer will

be stereo.

9. Input monitor volume

This adjusts the volume at which the input signal from Input jacks 1/2, Input jacks

3/4, and the Digital input connector will be output to the Headphone jack and

Master output jacks. When this is turned all the way to the right, the volume will be

the same as the volume of the recorded signal.

10. Input monitor switch

This button selects whether the input signal from the Input jacks 1 and 2, Input

jacks 3 and 4, and the Digital input connector will be sent without change from

the Headphone jack and the Master output jack. When this is on, the input signal

will be output. When this is off, the input signal will not be output. Turn this button

off (dark) if the audio data is being “thru-ed” within your computer, or if a mixer is

connected and the input signal is being output directly from the mixer for

monitoring.

* Input monitor switches can also be controlled directly from an ASIO 2.0-compatible

application such as Cubase.

11. Master volume

This adjusts the volume that is output from the Headphone jack and the Master

output jacks.

12. Headphone jack

A set of headphones can be connected here. The Headphone jack will output the

same sound as that of the Master output jacks. Sound will be output from the

Master output jacks even when headphones are connected.

13. Power indicator

This will light in red when the power is on.

If SCMS-flagged signals are being input from a Digital input connector (optical/

coaxial), this will blink.

If the ADVANCE (mode select) switch is OFF, this will blink if the sampling

frequency select switch is set to 96 kHz PLAY/96 kHz REC.

14. Power switch

Press this switch to turn the power on/off.

3 5

2

4

6

7

81

910

11

12

13

14

13

Names of things and what they do

Rear panel

fig.04-2

15. USB connector

Connect your computer here via a USB cable. Do not connect or disconnect the USB

cable while an audio playback application is recording or playing. Doing so may

cause the application to hang up.

16. ADVANCE (mode select) switch

This switches the operating mode.

In order for the settings to take effect, you must exit all applications and turn on the

power of the UA-5 once again.

On (Advanced mode)

The driver included with the UA-5 will be used to record/play/edit audio on

sequencer software or waveform editing software with high audio quality and

stable timing.

Off (Standard Driver mode)

Select this mode when using applications that use the audio driver included with

your operating system, and utilize functionality specific to your operating system.

For details on the operating mode, refer to Advanced mode and Standard Driver

mode (Windows–> p. 15 / Macintosh–> p. 34).

17. Digital input connector (coaxial)

Connect a coaxial cable here when you want to digitally input an audio signal from

a device such as a CD/MD/DAT.

18. Digital output connector (coaxial)

Connect a coaxial cable here when you want to digitally output an audio signal to

a digital recorder such as an MD or DAT.

19. Digital input select switch

This selects whether the coaxial or optical connector will be used for digital input.

20. Digital input connector (optical)

Connect an optical cable here when you want to digitally input an audio signal from

a device such as a CD/MD/DAT.

15

16

17

18

19

20

21

22

25

26

23

24

14

Names of things and what they do

fig.04-2

21. Digital output connector (optical)

Connect a coaxial cable here when you want to digitally output an audio signal to

a digital recorder such an MD or DAT.

22. Input jacks 3 and 4 adjustment volume

Adjusts the Input level of Input jacks 3 and 4.

23. Input jacks 3, 4

Make connections here when you want to input audio signals from an audio device

or MIDI sound generator.

24. Master output jacks (RCA phono type)

25. Master output jacks (phone type)

These are output jacks for analog audio signals. The same sound is output from the

RCA phono-type jacks and the phone-type jacks. Use the jacks appropriate for the

connected device or type of cable.

26. AC adaptor jack

Connect the included AC adaptor to this jack.

Block diagram

fig.04-3

15

16

17

18

19

20

21

22

25

26

23

24

15

Español Italiano Français Deutsch English

Getting Connected and Installing

Drivers (Windows)

If you are using a Macintosh computer, please proceed to Getting Connected and

Installing Drivers (Macintosh) (p. 34).

What is a driver?

fig.05-1e_50

A “driver” is software that

transfers data between the

UA-5 and application

software running on your

computer, when your

computer and the UA-5

are connected by a USB

cable. The driver sends

data from your application to the UA-5, and from the UA-5 to your application.

Advanced mode and Standard driver mode

The UA-5 has two operating modes, Advanced mode and Standard mode, and a

different driver is used by each mode.

■ Advanced mode

The UA-5 will operate in this mode when the rear panel Mode select switch is

turned ON. The special driver included on the UA-5 Driver CD-ROM will be used,

allowing audio to be recorded/played/edited with high quality and stable timing.

In Advanced mode, audio signals can be transferred between the UA-5 and the

computer at a resolution of 24 bits and sampling frequencies of 44.1/48/96 kHz.

Select this mode if you are using an application that allows high-quality audio

recording/playback/editing, such as an application that supports 24 bit audio

(e.g., the Cakewalk series or Cool Edit) or an ASIO-compatible application (e.g.,

Cubase VST or Logic Audio).

■ Standard driver mode

The UA-5 will operate in this mode when the rear panel Mode select switch is

turned OFF. The standard USB audio driver included with Windows will be used.

In standard driver mode, audio signals are transferred between the UA-5 and the

computer at a resolution of 16 bits and sampling frequencies of 44.1/48 kHz.

Select this mode if you are using an application that uses Window’s own

functionality, such as an application that uses the computer’s CD-ROM drive to

play back CD-audio, or an application that uses the software synthesizer included

with Windows.

The standard driver that is included with Windows does not support ASIO.

Application

USB

driver

Computer

USB cable

USB port

UA-5

If you want to use the UA-5 in Advanced mode, proceed to Installing the special

driver (p. 16). If you want to use OS-standard driver mode, proceed to Installing

the OS-standard driver (p. 25).

16

Getting Connected and Installing Drivers (Windows)

Installing the special driver

■ Windows 2000 users

WDM driver and MME driver

The UA-5 Driver CD-ROM contains two types of driver for Windows 2000.

Before you install the driver, select the driver that will be appropriate for the

application you want to use.

WDM driver

You should use this driver if you have specified WDM driver mode for SONAR or

a similar application. This will provide the highest-quality audio performance.

* It is not possible to use 24-bit audio with applications that do not support a WDM driver

mode, such as Cool Edit or Media Player.

MME driver

This driver allows you to use 24-bit audio even from applications that do not have

a WDM driver mode, such as Cool Edit.

* It is not possible to use the MME driver from WDM driver mode of an application such as

SONAR.

Switching between Advanced mode and Standard driver mode

If you first install both the special driver and the standard driver, you will be able

to switch between Advance and Standard driver modes by operating the UA-5's

ADVANCE (mode select) switch.

* In order for the setting of the ADVANCE (mode select) switch to take effect, you must

exit all sequencer software and other applications that use the UA-5, switch off the UA-5,

then turn it back on again.

The installation procedure will differ depending on your system.

Please proceed to one of the following sections, depending on the system you use.

• Windows 2000 users..................................(p. 16)

• Windows Me/98 users..............................(p. 22)

It is not possible to install both the WDM driver and the MME driver. You must

select one beforehand, and install only that driver. If after installing one of these

drivers you decide to change drivers, you must first delete the already-installed

driver and then install the new driver. (->Deleting the special driver (p. 63))

17

Español Italiano Français Deutsch English

Getting Connected and Installing Drivers (Windows)

Installing the driver

The WDM driver and the MME driver can be installed using

the same procedure.

1

With the UA-5 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB

mouse (if used).

2

Log on to Windows as a user with administrative

privileges (such as Administrator).

3

Open the System Properties dialog box.

Click the Windows Start button, and from the menu that

appears, select Settings | Control Panel. In Control Panel,

double-click the System icon.

fig.05-2e_30

4

Open the Driver Signing

Options dialog box.

Click the Hardware tab, and

then click [Driver Signature].

fig.05-3e_30

5

Make sure that “File

signature verification” is

set to “Ignore.”

If it is set to “Ignore”, simply

click [OK].

If it is not set to “Ignore”, make

a note of the current setting

(“Warn” or “Block”). Then

change the setting to “Ignore”

and click [OK].

If the UA-5 is already

connected to your computer

and a message of “Add New

Hardware Wizard” is

displayed, go to the UA-5

Driver CD-ROM folder named

Driver\Win2000 \WDM or

Driver\Win2000\MME, open

the file Readme_e.htm, and

read the “Troubleshooting”

section entitled “You

attempted to install using

the above procedure, but

were notable to.”

If you changed “File signature

verification” in step 5, you

must restore the previous

setting after you have installed

the driver. (–> If you changed

“File signature verification”

(p. 21))

18

Getting Connected and Installing Drivers (Windows)

6

Open the System Properties dialog box.

Click [OK].

7

Exit all currently running software (applications).

Also close any open windows. If you are using virus checking

or similar software, be sure to exit it as well.

8

Insert the CD-ROM.

Insert the UA-5 Driver CD-ROM into the CD-ROM drive of

your computer.

fig.05-4e_30

9

Open the “Run...” dialog

box.

Click the Windows Start button.

From the menu that appears, select

“Run...”

fig.05-5e_30

10

In the dialog box that

appears, input the

following into the

“Open” field, and click

[OK].

If installing the WDM driver

D:\Driver\Win2000\WDM\Setupinf.exe

If installing the MME driver

D:\Driver\Win2000\MME\Setupinf.exe

The drive name “D:” may be

different for your system.

Specify the drive name of your

CD-ROM drive.

In this manual, the location of

folders and files is given in

terms of the file path, using \ as

the delimiter. For example,

WDM\Setupinf.exe indicates

the Setupinf.exe file found in

the WDM folder.

19

Español Italiano Français Deutsch English

Getting Connected and Installing Drivers (Windows)

fig.05-6e_30

11

The SETUPINF dialog

box will appear.

You are now ready to install

the driver.

Drag the title bar to move the

SETUPINF dialog box into the

upper part of the screen.

* Do not click [OK] at this time.

12

With the power turned off, use a USB cable to

connect the UA-5 to your computer.

13

Set the UA-5’s mode select switch to the ON

position.

14

Turn on the power of the UA-5.

Connect the AC adaptor to the UA-5's AC adaptor jack, and

insert the AC adaptor's plug into an AC power outlet. Then,

turn on the power of the UA-5.

If a message of “The driver is

already installed” appears,

you can connect the UA-5 to

your computer and use it.

This unit is equipped with a

protection circuit. A brief

interval (a few seconds) after

power up is required before

the unit will operate normally.

If in step 5 the “File

signature verification”

setting was not set to

“Ignore”, a “Digital

signature not found”

dialog box will appear.

If “File signature verification” is set to “Warn,”

1. Click [Yes].

2. Continue the installation.

If “File signature verification” is set to “Block”

1. Click [OK].

2. When the “New hardware detection wizard”

appears, click [Finish].

3. Perform the installation as described in the

“Troubleshooting” section on Device Manager shows

20

Getting Connected and Installing Drivers (Windows)

fig.05-8e_30

4

The Insert disk

dialog box will

appear.

Click [OK].

fig.05-9e_30

5

The File is needed

dialog box will

appear.

In the Copy files from

field, type the folder

name that is shown in

the Setupinf dialog box,

and click [OK].

fig.05-10e_30

6

The “Find new

hardware wizard”

may be displayed.

Verify that “EDIROL

UA-5 (WDM)” or

“EDIROL UA-5 (MME)”

is displayed, and click

[Finish].

If the “Find new hardware wizard” dialog box is not

displayed, proceed to step 18.

fig.05-11e_30

7

Restart Windows.

The Change system

settings dialog box may

appear. Click [Yes].

Windows will restart automatically.

If the Change system settings dialog box does not appear,

restart Windows from the Start menu.

If the Insert disk dialog box

does not appear, please read

The “Insert Disk” dialog box

does not appear (p. 55)

La pagina sta caricando ...

Edirol UA-5 Getting Started

Questo manuale è adatto anche per

Edirol UA-5 Getting Started

in altre lingue

Documenti correlati

Altri documenti