Dymo RHINO 6000 Manuale utente

Marca: Dymo

Modello: RHINO 6000

Categoria: Stampanti per etichette

Tipo: Manuale utente

Questo manuale è adatto anche per

Printer Rhino 6000

www.rhinolabeling.com

User Guide

Figure 1 RHINO 6000 Printer

Cut/Feed

Print/# of copies

Escape

Backspace

Shift

Save/Insert

Barcode

Backlight

Library

Tape Exit

LCD Display

Symbol

Hot Keys

Navigation keys

USB connector

Power connector

Space bar

Power

Clear

Recall/Remove

Settings

Size/CAPS

Serialization

Enter

iii

Contents

About Your New Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Connecting the Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Connecting the Power Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Inserting the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Recharging the Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Inserting and Removing the Tape Cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Setting the Tape Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Selecting a Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Selecting Units of Measure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting to Know Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Using the Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Adjusting the Display Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hiding the Caption Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CAPS Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Shift Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Escape Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Navigation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Backspace Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Clear Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Cutter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Hot Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Working with Label Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Creating a Label File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Adding Labels to a Label File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Removing Labels from a File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Printing a Label File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Formatting a Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Changing the Text Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Changing the Text Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Creating Multi-Line Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using International Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Creating Industrial Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Creating Wire Wrap Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Creating Vertical Wrap Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Creating Horizontal Wrap Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Creating Self-Laminating Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Creating Flag Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Creating Fixed Length Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Creating Patch Panel Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Creating Terminal Block Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Creating Module Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Using Fuse Multipliers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Printing Empty Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Creating Vertical Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Changing the Label Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Changing the Label Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Printing Vertical Lines between Cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Using Barcodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Adding a Barcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Editing a Barcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Deleting a Barcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Hiding Barcode Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Adding Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Inserting Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Inserting User Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Using the Text Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Inserting Library Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Adding My Library Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Deleting My Library Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Adding Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Creating a Series of Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Using Simple Serialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Using Simultaneous Serialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using Advanced Serialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Printing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Printing Multiple Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Collating Multiple Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Pausing between Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Advancing the Label Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Adjusting Print Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Using Printer Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Saving a Label File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Recalling a Label File from Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Deleting a Label File from Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Cleaning Your Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Using RHINO Connect Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Connecting to your Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Library Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

About Your New Printer

With your new RHINO label printer, you can create a

wide variety of high-quality, self-adhesive labels. You

can choose to print your labels in many different sizes,

and styles. The printer uses RHINO Industrial label tape

cassettes in widths of 1/4” (6 mm), 3/8” (9 mm), 1/2”

(12 mm), 3/4” (19 mm), or 1” (24 mm). RHINO tape

cassettes are also available in a wide range of

materials, such as flexible nylon, permanent polyester,

vinyl, non-adhesive tag, and heat shrink tubes.

Visit www.rhinolabeling.com for information on

the full line of labels and accessories for your printer.

Warranty Registration

Please complete the warranty registration card and

return it to the appropriate customer service address

within seven days. Visit www.rhinolabeling.com

for details.

Getting Started

Follow the instructions in this section to start using

your printer for the first time.

Connecting the Power

The printer can operate on battery or AC power. A

power adapter and a rechargeable battery pack is

included with your printer.

The printer can operate with six AA alkaline

batteries for power; however, alkaline batteries should

only be used as temporary backup power.

To save power, the printer will automatically turn off

after five minutes of inactivity.

Connecting the Power Adapter

The printer uses a 110V-240V power adapter.

Connecting the power adapter with the battery pack

inserted recharges the battery pack.

To connect the power adapter

1. Plug the power adapter into the power connector

on the bottom of the printer. See Figure 2.

Figure 2

2. Plug the other end of the power adapter into a

power outlet.

Inserting the Battery Pack

The printer uses the rechargeable, Lithium-ion battery

pack when not connected to the power adapter. As

temporary backup power, the printer can operate

using six AA alkaline batteries.

To insert the battery pack

1. Press the thumb latch on the back of the printer to

remove battery compartment lid. See Figure 3.

Figure 3

2. Snap the battery pack into the battery

compartment lid. See Figure 3.

3. Replace the battery compartment lid.

Press thumb

latch to open

Snap

battery

pack into lid

Remove the batteries if the printer will not be

used for a long period of time.

Recharging the Battery Pack

The battery pack automatically recharges while the

printer is connected to a power source through the

power adapter. Charging the battery pack for the first

time will take approximately eight hours; recharging

the battery pack will take approximately two hours.

Inserting and Removing the Tape

Cassette

Your printer comes with a starter tape cassette. Visit

www.rhinolabeling.com for information about

purchasing additional tape cassettes.

To insert the tape cassette

1. Gently lift the tape cassette door on the back of the

printer.

2. Make sure the tape and ribbon are taut across the

mouth of the cassette and that the tape passes

between the guides. If necessary, turn the ribbon

rewind spool clockwise to tighten the ribbon.

3. Insert the cassette with the tape and ribbon

positioned between the guideposts.

Figure 4

4. Press gently on the cassette until the cassette

moves into place. The insertion mechanism will

guide the cassette into place.

5. Close the tape cassette door.

To remove the tape cassette

1. Lift the tape cassette door on the back of the printer.

2. Press the cassette eject button. The tape cassette is

lifted from the printer.

3. Gently remove the tape cassette.

4. Insert a new tape cassette as described above.

5. Reset the tape width as described in Setting the

Tape Width.

Setting the Tape Width

Each time you insert a tape cassette into the printer,

you are prompted to set the tape width so the printer

knows what size label tape you are currently using.

Some of the features you use to design labels are

dependent on the width of the tape.

However, to create a label for a tape width different

than what is currently in the printer, you can set the

tape width from the Settings menu.

To set the tape width

1. Press SETTINGS. The Settings menu appears on the

display.

2. Select Tape Width.

3. Select the width of the label tape currently inserted

in the printer.

4. Press OK and then select Done (ESC).

Selecting a Language

Several language-related features on the printer are

determined by the language setting, such as special

characters, menu text, and so on. By default the

language is set to English.

Eject Button

Lift

Guide posts

Ribbon rewind

spool

To select a language

1. Press SETTINGS and select Language.

2. Select the language.

3. Press OK and then select Done (ESC).

Selecting Units of Measure

You can choose to work in inches or millimeters.

To select the units of measure

1. Press SETTINGS and select Units.

2. Select Inch or mm.

3. Press OK and then select Done (ESC).

Getting to Know Your Printer

Become familiar with the location of the feature and

function keys on your printer. See Figure 1 on the

inside front cover. The following sections describe each

feature in detail.

Power

The button turns the power on and off. If no keys

are pressed after five minutes, the power is turned off

automatically.

When the printer is turned off, the current label file

and its settings are remembered for the next time the

printer is turned on. If the battery pack and power

adapter are disconnected at the same time, some of

the settings are remembered; however, the current

label file is lost and you will need to reset the tape

width when you reconnect the power and turn on the

printer.

LCD Display

The printer’s LCD display includes a caption bar across

the top, showing the current label type, and feature

indicators on the right side, showing which features

are currently selected. See Figure 5.

Figure 5

When the text you have entered will not fit on the

label as currently defined, the portion of the text that

will not fit is shaded. If you attempt to print the label

containing text that will not fit, the excess text will not

be printed.

Using the Backlight

In low light conditions, you can turn on the backlight

to make it easier to see the display. To save power, the

backlight will turn off automatically after 15 seconds

of inactivity. Pressing any key will turn the backlight

back on again. The backlight key acts as a toggle to

turn the light on and off.

To toggle backlighting on and off

♦ Press .

Adjusting the Display Contrast

In addition to backlighting, you can adjust the display

contrast to help in different lighting conditions.

To adjust the display contrast

1. Press SETTINGS.

2. Select LCD contrast and press OK.

3. Use the arrow keys to select a value between

0 (lighter) and 8 (darker). The contrast changes as

you select the different settings.

4. Press OK, and then select Done (ESC).

CAPS

AUTO

Abc

xx8

Label

Position

i88/i88

88/88

Feature

indicators

Caption bar

Battery level

indicator

Hiding the Caption Bar

The Caption bar at the top of the display shows the

current label type and for some label types, additional

information about the label, such as size or barcode

type. The Caption bar can be hidden to allow more

lines of the label to be shown in the display. This is very

useful for multi-line labels.

To hide the Caption bar

1. Press SETTINGS.

2. Select Caption bar and press OK.

3. Select Hide, press OK, and then select Done (ESC).

CAPS Mode

The CAPS key toggles capitalization on and off. When

CAPS mode is turned on, the CAPS indicator is shown

on the display and all letters that you enter will be

capitalized. The factory default setting is CAPS mode

on. When CAPS mode is off, all letters entered appear

in lower case.

To toggle CAPS on and off

♦ Press CAPS (SHIFT + SIZE).

Shift Key

The SHIFT keys are used to select the function or

symbol printed above a key. For example, when you

press the 9 key, the number 9 appears in the display;

however, if you press SHIFT and then 9, an asterisk (*)

appears in the display. Pressing one of the Shift keys

toggles the function on and off, so you do not need to

hold down both keys together.

Escape Key

The ESC key returns you to the previous menu from

within any menu without making a selection.

Navigation Keys

The navigation keys operate as follows:

Backspace Key

The key removes the character to the left of the

cursor.

Clear Key

The CLR key clears all current text settings and format,

returning the display to the General label type.

Cutter Button

The Cutter button cuts the label tape. When printing

multiple labels, the printer pauses after printing each

label so that you can cut the label. You can turn this

feature off, so that multiple labels will print

continuously. See Pausing between Labels on

page 14.

Hot Keys

A number of hot keys are available for creating specific

types of labels, adding barcodes, inserting symbols,

and using the text from the library. These hot keys are

described in detail later in this user guide.

Key Function

Moves one character to the left in the display

Returns to the previous menu (can also use

ESC)

SHIFT

Moves one label to the left in the display

Moves one character to the right in the display

Moves to the next menu level (can also use

OK)

SHIFT

Moves one label to the right in the display

;

Moves up in a list of items

Moves down in a list of items

Selects a menu item

Working with Label Files

The printer creates and stores labels as label files. A

label file can contain one or more labels. When you

create a new label, you also create a new label file. You

can then insert additional labels, remove labels, and

store the group of labels as a label file in memory.

Creating a Label File

The printer remembers the last label that you were

working on when the power was turned off. You need

to clear that label text and formatting before you

create a new label.

To create a new label file

1. If necessary, press CLR to clear the previous label

and formatting from the display.

2. Type some text using the keypad.

3. Format the text using Text Size or Text Style. See

Formatting a Label on page 5.

4. Save the label to memory. See Saving a Label File

on page 15.

Adding Labels to a Label File

You can add additional labels to an existing label file.

To add a label to a file

1. Press INSERT (SHIFT + SAVE).

2. Select To the right to add a label to the right of the

cursor position or To the left to add a label to the

left of the cursor position.

3. Press OK. A new blank label is inserted in the

display to the left or right of the current label.

You can move from label to label using the arrow keys.

Removing Labels from a File

You can remove one or more labels from a label file.

To remove a label

1. Press REMOVE (SHIFT + RECALL).

2. Select one of the following:

• All to remove all of the labels in the file.

• Current to remove the label at the current

cursor position.

• Range and then select the range of labels to

remove.

3. Press OK. The selected labels are removed from the

display.

Printing a Label File

When you print a label file, you choose whether to

print all of the labels, the current label, or a range of

labels in the file.

To print labels

1. Press PRINT. If your label file contains more than

one label, a print menu is displayed.

2. Select one of the following:

• All to print all of the labels in the file.

• Current to print the label at the current cursor

position.

• Range and then select the range of labels to

print.

3. Press OK. The labels selected are printed.

4. Press CUT and remove the labels.

Formatting a Label

You can choose from a number of formatting options

to enhance the appearance of your labels.

Changing the Text Size

You can print the text on your label in eight sizes:

extra-extra-small, extra-small, small, medium, large,

extra-large, extra-extra-large and BIG (all capital

letters). The text size selected applies to all the text on

all the labels in a label file.

You can also select Auto as the text size. When Auto is

selected, the best text size is automatically determined

for the height and width of the label you are creating.

BIG font is not used when Auto text size is selected.

The text size available for you to use depends on

the width set for the label tape and the type of label

you are creating.

To set the font size

♦ Press SIZE. Each time you press SIZE, the next

available font size is highlighted on the Size feature

indicator on the display.

You can also select the font size from the Settings

menu.

Changing the Text Style

You can print the text on your label in several styles:

bold, italic, underlined, and boxed. And, you can

choose normal width or narrow width. The text style

applies to all the text on all the labels in the label file,

including most symbols. Text style is not applied to

user defined symbols.

To set the text style

1. Press SETTINGS.

2. Select Text style and press OK.

3. Use the arrow keys to select a style.

4. Press OK and then select Done (ESC).

Creating Multi-Line Labels

You can create multi-line labels depending upon the

width of the label tape, as follows:

The display shows two lines of text with the Caption

bar displayed; or three lines with the caption bar

hidden. Use the arrow keys to scroll through multiple

lines. See Hiding the Caption Bar on page 4.

To create a multi-line label

1. Type the text for the first line, and press ENTER.

2. Type the text for the next line.

3. Repeat these steps for each additional line.

Using International Characters

The printer supports the extended Latin character set

using RACE technology. Similar to using a mobile

phone keypad, holding down a letter key will scroll

through variations of that letter.

For example, if you hold down the letter a, you will see

a à á â ã ä å and so on through all the variations

available. The order in which the character variations

appear depends on the language you selected to use.

Creating Industrial Labels

You can quickly create labels for special industrial

applications, such as cable wraps, flags, patch panels,

terminal blocks, or modules. You can create fixed

length labels or self-laminated labels.

Hot keys are available for each of the label types

available. The current label type is displayed in the

Caption bar. By default, the label type is General with

no special formatting, text centered, and the length

automatically determined by the amount of text.

The hot keys toggle the label type on and off. For

example, if you choose Flag and later want a General

label, just press the Flag key a second time to remove

the Flag settings and return to General label type.

Tape

Width

1/4”

(6 mm)

3/8”

(9 mm)

1/2”

(12 mm)

3/4”

(19 mm)

1”

(24 mm)

# Lines 13355

Creating Wire Wrap Labels

You can create several types of labels that wrap around

a cable or wire: vertical wire wrap, horizontal wire

wrap, self-laminating, and flag labels.

Creating Vertical Wrap Labels

A Vertical Wrap label is placed

around the width of a wire or

cable. You can enter up to five

lines of text and the text is

repeated as many times as

possible depending on the size of the text and the

length of the label.

You select from a number of different wire gauges or

cable lengths. The printer then determines the size of

the label. The following table shows the selections

available.

To create a vertical wrap label

1. Press V.WRAP.

2. Select the desired wire gauge or cable size, and

press OK.

3. Select Done (ESC) to create the label.

To create multiple labels quickly, see Creating a

Series of Labels on page 12.

Creating Horizontal Wrap Labels

A Horizontal Wrap label is

placed horizontally along the

length of the wire or cable. The

label text is repeated as many

times as possible depending on the size of the text and

the width of the tape.

To create a horizontal wrap label

1. Press H.WRAP (SHIFT + V.WRAP).

2. Enter the label length and press OK. Select AUTO to

have the length automatically set to fit the text.

3. Select Done (ESC) to create the label.

To create multiple labels quickly, see Creating a

Series of Labels on page 12.

Creating Self-Laminating Labels

The Self-Laminating label is

designed to be used with RHINO

Self-Laminating Labels (part

number 1734821). The text of the

label is printed on the top portion

of the label so the clear, bottom

half of the label can wrap around and cover the text.

Self-Laminating tape is 24 mm wide; however, you can

only enter two lines of text and are limited to using

extra-extra-small, extra-small, and small font sizes.

To print a self-laminating label

1. Press SELF-LAM (SHIFT + FLAG).

2. Enter the label length or select AUTO to have the

label length automatically set to fit the text.

3. Press OK.

4. Select Done (ESC) to create the label.

To create multiple labels quickly, see Creating a

Series of Labels on page 12.

CAT X CABLE 3.0”

COAX CABLE 4.0”

22-16 AWG CABLE 5.0”

14-10 AWG (Default) CABLE 6.0”

8-4 AWG FIBER 0.1” - 1/4”

3-1 AWG FIBER 1/4” - 1/2”

1/0-4/0 AWG FIBER 1/2” - 1”

Creating Flag Labels

Flag labels wrap around a wire or

cable leaving the text part of the

label extending out from the

cable. The text on flag labels is

automatically printed on both

ends of the label leaving a blank

space in the middle that wraps around the cable.

When the label is applied to the cable, both ends of

the label are applied back to back leaving a tail or flag.

The result is a label that can be read from both sides.

To print a flag label

1. Press FLAG.

2. Enter the length for the flag portion of the label.

Select AUTO to have the length automatically set to

fit the text. The total length of the label is calculated

by doubling the flag length and adding 34 mm to

wrap around the cable.

3. Select Done (ESC) to create the label.

4. Enter the text for the label and press PRINT.

To create multiple labels quickly, see Creating a

Series of Labels on page 12.

Creating Fixed Length Labels

Normally, the length of the label is determined by the

length of the text entered. However, you may wish to

make a label for a specific purpose that is a fixed

length regardless of the length of the text.

The factory default fixed length is 1.0” (25 mm). Any

change you make to the fixed length setting remains

in effect until you change it.

To set the label length

1. Press FIXED.

2. Enter the length of the label and press OK.

Any text that does not fit within the fixed length

appears shaded in the display and will be truncated

when the label is printed.

Creating Patch Panel Labels

Patch panel mode allows you to

label a row of ports on a patch

panel. You select the distance

between ports, enter the desired

text, and print. The result is a long

label with multiple, evenly spaced

text for each port.

To create a patch panel label

1. Press PPANEL.

2. Select Port distance.

3. Enter the distance between each port and press OK.

The factory default is 0.6” (15 mm).

4. Select # of ports.

5. Enter the number of ports and press OK.

6. Select Done (ESC) to create the label.

Each port is separated by a solid black line on the

display.

7. Enter the text for each port in the label. Use the left

or right arrow key to move from port to port.

To create data for the ports automatically, see

Creating a Series of Labels on page 12.

To print vertical lines between the ports, see Printing

Vertical Lines between Cells on page 10.

Creating Terminal Block Labels

Terminal block labels are very

similar to patch panel labels;

however, the text is printed

vertically for each block.

To create a terminal block

label

1. Press TBLOCK.

2. Select # of blocks and press OK.

3. Enter the number of blocks and press OK.

4. Select Block size and press OK.

5. Enter the width of each block and press OK. The

factory default is 0.5” (17.5 mm).

6. Select Done (ESC) to create the label.

7. Enter the text for each terminal.

Use SHIFT + , or = to move among terminals.

To create data for the terminal blocks automatically,

see Creating a Series of Labels on page 12.

Creating Module Labels

The Module label type allows you

to label a row of fuses. You set the

width of a fuse and the number of

fuses, enter the desired text for

each fuse, and print. The result is a

long label with multiple, evenly

spaced text for each port. You can use fuse multipliers

to adjust the width of individual modules as necessary.

To create a module label

1. Press MODULE.

2. Select Fuse length and press OK.

3. Enter the fuse length and press OK. Select the

length that applies to the smallest size fuse in the

module. You can then use fuse multipliers to

increase the size of any individual modules that are

larger. See step 6. The factory default fuse length is

0.5” or 17.5 mm.

4. Select # of modules and press OK.

5. Enter the number of modules for this label and

press OK.

6. Adjust the size of individual modules using fuse

multipliers. See Using Fuse Multipliers.

7. Select Done (ESC) to create the label.

8. Enter the text for each module. Use the left or right

arrow key to move from module to module.

To create the data for the modules automatically, see

Creating a Series of Labels on page 12.

Using Fuse Multipliers

Fuse multipliers allow you to adjust the size of

individual fuse modules within a module type label.

To adjust the size of an individual module

1. Create a module label as described in Creating

Module Labels.

2. Press SETTINGS.

3. Select Current label config. and press OK.

4. Select Multipliers and press OK.

5. Use the arrow keys to select the module number to

adjust and press =.

6. Select the multiplier for that module.

7. Press OK and then Done (ESC) to return to the

label.

Printing Empty Modules

You can choose to print empty modules at the end of

Module labels. By default, printing empty modules is

turned off.

To print empty modules

1. Press SETTINGS.

2. Select Print empty modules and press OK.

3. Select On and press OK.

4. Select Done (ESC) to return to the label.

Any empty modules at the end of a module label will

now be printed.

Creating Vertical Labels

You can choose to print labels with

the text running vertically. Labels

with multiple lines of text will

print as multiple columns of text.

To print a vertical label

1. Enter the text for your label.

2. Press VERTICAL.

3. Enter a length for the label. Select AUTO to have the

length of the label automatically set to fit the text.

4. Press OK to create the label.

Changing the Label Type

Once you create a label using one label type, you can

easily change the label type without losing your data.

When you change from a multi-cell label, such as a

patch panel, to a single cell label, such as General or

Flag, each cell becomes a new label. All blank cells are

deleted.

If the data from one label type will not fit in the new

label type, the text that will not fit is shaded in the

display.

To change the label type

1. Press the hot key for the new label type.

2. Make any necessary adjustments to the settings for

the label type.

Changing the Label Settings

Once you create a specific label, you can change the

settings without starting all over again.

To change the label settings

1. Press SETTINGS.

2. Select Current label config. and press OK.

The settings for the particular label type are

displayed.

3. Make the necessary changes.

4. Press OK and then select Done (ESC).

Printing Vertical Lines between Cells

For multiple cell labels, such as Patch Panel, Terminal

Block, and Module, you can choose to print a vertical

line between each of the cells.

To print vertical lines between cells

1. Press SETTINGS.

2. Select Vert. lines and press OK.

3. Select On.

4. Press OK and then select Done (ESC).

A vertical mark is printed between each cell.

Using Barcodes

The printer can generate the following types of

barcodes.

You can only print a barcode on 3/4” (19 mm) and

1”(24 mm) wide label tape. You can choose to print

the human-readable text or not, and you can serialize

barcodes.

The barcode prints horizontally along the label with

the text in small print underneath the barcode. You

can optionally add text before and after the barcode.

Adding a Barcode

The barcode text appears on the label in the display

just like any other text. However, if the cursor is

positioned within the barcode text, Barcode and the

type of barcode are displayed in the Caption bar.

To add a barcode

1. Press BARCODE.

2. Use the arrow keys to select the barcode type, and

press OK.

3. Enter the text for the barcode within the barcode

and press OK.

Editing a Barcode

You edit an existing barcode or delete a barcode in the

same manner.

To edit a barcode

1. Move the cursor anywhere within the barcode text.

2. Press BARCODE or type a character. A message

appears asking if you would like to edit the barcode.

Code 39 EAN 8

Code 128 Auto EAN13

UPC A UPC E

3. Press OK. The text of the existing barcode appears.

4. Edit the barcode text and press OK.

Deleting a Barcode

A barcode is entered on the label as one character.

To delete a barcode

1. Place the cursor at the end of the barcode on the

display.

2. Press .

Hiding Barcode Text

You can choose to hide the human-readable text for

the barcode.

To hide barcode text

1. Press SETTINGS.

2. Select Barcode HR and press OK.

3. Select Off.

4. Press OK and then select Done (ESC).

Adding Symbols

Your printer includes a set of default symbols to use on

your labels. The symbols are separated into several

categories:

A complete list of the default symbols can be found

beginning on page 17.

Some of the more popular symbols can be accessed

from the number keys using SHIFT plus the number.

For example, pressing SHIFT + 1 inserts an open

bracket ([).

If you transfer a custom set of symbols from the RHINO

Connect™ Software to the printer, an additional set of

User symbols becomes available. See Using RHINO

Connect Software on page 16 for more information.

Inserting Symbols

Symbols added to a label can be formatted or deleted

just like any other character you enter.

To insert a symbol

1. Press SYMBOL.

2. Select Default, if necessary.

3. Select a category of symbols.

4. Use the arrow keys to find the symbol you want.

5. Press OK to insert the symbol on the label.

Inserting User Symbols

Custom symbols downloaded from RHINO Connect

Software are stored as User symbols. See Using

RHINO Connect Software on page 16 for more

information.

You insert User symbols in the same manner as pre-

defined symbols; however, User symbols cannot be

formatted.

To insert a User symbol

1. Press SYMBOL.

2. Select User.

3. Use the arrow keys to find the symbol you want.

4. Press OK to insert the symbol on the label.

Using the Text Library

Your printer includes a pre-defined text library. The

library is separated into several categories:

An additional category, called My Library, is available

for you to add custom text to use on your labels.

Electrical Brackets

Voice/Data Arrows

Audio/Video Numbers

Warning Home Electrical

Punctuation Currency

Location Voice/Data

Audio Security

Video

My Library text is not included when you select

All from the Library menu.

A complete list of pre-defined text strings can be

found beginning on page 18.

Inserting Library Text

Library text added to a label can be edited, formatted,

or deleted just like text you enter from the keypad.

To add text to a label

1. Press LIBRARY.

2. Select one of the categories.

3. Press the first letter of the text string you wish to

use. The cursor jumps to the first text string that

begins with that letter.

4. Press OK to insert the text on the label.

Adding My Library Text

You can download custom text from RHINO Connect

Software or you can add custom text to the library

directly from the printer. See Using RHINO Connect

Software on page 16 for more information.

To add custom text

1. Press LIBRARY.

2. Use the arrow keys to select My Library.

3. Select Add new string and press OK.

4. Enter the text and press OK.

The text is added to My Library.

Deleting My Library Text

You can delete custom text from My Library.

To delete My Library text

1. Press LIBRARY.

2. Use the arrow keys to select My Library.

3. Select the text to delete.

4. Press . A confirmation message appears.

5. Press OK to delete the text.

Adding Graphics

When labels are transferred to the printer from RHINO

Connect Software, any images are stored separately in

the printer as graphic files. You can apply these graphic

files to most labels. When a graphic cannot be used

with a certain label, a warning appears on the display.

See RHINO Connect Software Online Help for more

information about placing images on a label.

To add a graphic

1. Press SETTINGS.

2. Select Choose graphic and press OK.

3. Select the graphic file you want to use and press OK.

The graphic does not appear in the display, but will

print on the label.

Creating a Series of Labels

You can automatically generate labels by creating a

series. You create a starting pattern, and then set the

increment and count for the series.

You can serialize any number or letter by selecting the

position to be incremented, such as the number 2 in

123 or the letter B in ABC. For example, when the 2 is

selected in 123 and the increment #=3, the resulting

labels would print as 123, 133, and 143.

Letters can be incremented from A to Z and a to z, and

numbers from 1 to 9. When the letter Z or the number

9 is reached during serialization, a letter or number is

added to increase the increment. For example, Az

increments to Aaa, AZ increments to BA, and A9

increments to A10.

Three methods of serialization are available: simple,

simultaneous, and advanced.

Using Simple Serialization

Simple serialization creates a series of labels by

incrementing one alphanumeric character in the

pattern. For example, 101, 102, 103, 104, and so on.

To use simple serialization

1. Enter the text for your label.

2. Press SERIAL. A box appears around the first

character in the label.

3. Use the arrow keys to move the cursor to the

position you wish to increment and press OK.

4. Select the amount you want to increment each

label and press OK. You choose to increment in

steps up to 10.

5. Select the number of labels you want to create and

press OK. You can choose to create up to 99 labels.

A new label is added in the display for each label in the

series.

To print multiple copies of the same serialized

label, press # COPIES (SHIFT + PRINT) and enter the

number of copies of each label to print. See Printing

Multiple Copies on page 14.

Using Simultaneous Serialization

Simultaneous serialization creates a series of labels by

incrementing two different alphanumeric characters

at the same time. For example, A-101, B-102, C-103,

and so on.

To use simultaneous serialization

1. Enter the text for your label.

2. Press ADV.SER. (SHIFT + SERIAL).

3. Select Simultaneous and press OK. A box appears

around the character where the cursor was

positioned.

4. Select the first character position you want to

increment and press OK.

5. Select the second character position you want to

increment and press OK.

6. Select the amount you want to increment these

characters on each label and press OK. You can

choose to increment in steps up to 10.

7. Select the number of times to increment these

characters and press OK.

A new label is added in the display for each label in the

series.

Using Advanced Serialization

Advanced serialization creates a series of labels by

allowing you to select two sequences in the pattern

and increment them consecutively.

For example, A-101, A-102, A-103, B-101, B-102, B-

103, C-101, C-102, C-103, and so on.

To use advanced serialization

1. Enter the text for your label.

2. Press ADV.SER. (SHIFT + SERIAL).

3. Select Advanced and press OK. A box appears

around the character where the cursor was

positioned.

4. Select the first character position you want to

increment and press OK.

5. Select the amount you want to increment this

character position and press OK. You can choose to

increment in steps up to 10.

6. Select the number of times to increment this

character position and press OK.

7. Repeat Steps 4 through 6 for the second character

position you want to increment.

A new label is added in the display for each label in the

series.

Printing Options

You can choose to print multiple copies of the same

label, collate the copies, pause to cut between labels,

advance the label tape, and adjust the print contrast.

Printing Multiple Copies

You can print up to 99 copies of the same label at one

time.

To print multiple copies

1. Press # COPIES (SHIFT + PRINT).

2. Press the

S arrow to increase the number of copies

to print. The default is 2 copies.

3. Press the

T arrow to decrease the number of

copies (maximum is 99).

4. Press OK or PRINT to begin printing.

You may notice a brief pause in printing

between each label for more complex formats.

When printing is finished, the number of copies to

print returns to 2.

Collating Multiple Copies

When printing multiple copies of a label file containing

more than one label, all the copies of a label are

printed before the next label starts printing. You can

choose to have the label file print collated, so each

complete copy of the file prints before the second copy

starts. The following example shows three copies of a

label file containing three labels printed normally and

collated.

Normal

A101 A101 A101 A102 A102 A102 A103 A103 A103

Collated

A101 A102 A103 A101 A102 A103 A101 A102 A103

To collate multiple copies

1. Press SETTINGS.

2. Select Collate multi. copies and press OK.

3. Select On.

4. Press OK and then select Done (ESC).

Pausing between Labels

By default the printer pauses after printing each label

so you can cut the label. You can turn this feature off to

have the labels print continuously.

To set the printer to print continuously

1. Press SETTINGS.

2. Select Pause to cut btw labels and press OK.

3. Select Off.

4. Press OK and then select Done (ESC).

Advancing the Label Tape

The default leader space for all labels is approximately

5/16” (10 mm). To add additional blank space to the

beginning or end of your label, you can feed the tape

in 5/16” (10 mm) increments.

To advance the tape

1. Press FEED (SHIFT + CUT).

2. Press OK to advance the tape.

Adjusting Print Contrast

Depending on the label material you choose, you may

need to lighten or darken the print on the label.

To adjust the print contrast

1. Press SETTINGS.

2. Select Print contrast and press OK.

3. Use the arrow keys to adjust the print contrast.

4. Press OK and then select Done (ESC).

5. Repeat as necessary until you are satisfied with the

print quality.

La pagina sta caricando ...

Dymo RHINO 6000 Manuale utente

Marca: Dymo

Modello: RHINO 6000

Categoria: Stampanti per etichette

Tipo: Manuale utente

Questo manuale è adatto anche per

Printer Rhino 6000

Scarica il pdf

rapporto

in altre lingue

English: Dymo RHINO 6000 User manual

Dymo RHINO 6000 Manuale utente

Questo manuale è adatto anche per

Dymo RHINO 6000 Manuale utente

in altre lingue

Documenti correlati

Altri documenti