Tyan S7016 Manuale utente

http://www.tyan.com

1

S7016

Version 1.1

Copyright

®

is a

registered trademark of MiTAC International Corporation.

Trademark

All registered and unregistered trademarks and company names contained in this

manual are property of their respective owners including, but not limited to the

following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

5500 Series and combinations thereof are trademarks of Intel Corporation.

AMI, AMI BIOS are trademarks of AMI Technologies.

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE is a trademark of Novell.

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Notice

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to printing.

MiTAC assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. MiTAC

retains the right to make changes to product descriptions and/or specifications at

any time, without notice. In no event will MiTAC be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

2

http://www.tyan.com

Table of Contents

Check the box contents! 3

Chapter 1: Introduction

1.1 Congratulations 5

1.2 Hardware Specifications 5

1.3 Server Engines Pilot2 8

Chapter 2: Board Installation

2.1 Board Image 10

2.2 Block Diagram 11

2.3 Board Parts, Jumpers and Connectors 12

2.4 Installing the Processor and Heatsink 22

2.5 Thermal Interface Material 25

2.6 Finishing Installing the Heatsink 26

2.7 Tips on Installing Motherboard in Chassis 27

2.8 Installing the Memory 28

2.9 Attaching Drive Cables 31

2.10 Installing Add-in Cards 32

2.11 Connecting External Devices 33

2.12 Installing the Power Supply 34

2.13 Finishing up 34

Chapter 3: BIOS Setup

3.1 BIOS Main Menu 37

3.2 Advanced Menu 38

3.3 PCI PnP Menu 66

3.4 Boot Menu 68

3.5 Security Menu 73

3.6 Chipset Menu 74

3.7 Exit Menu 80

Chapter 4: Diagnostics

4.1 Beep Codes 81

4.2 Flash Utility 81

4.3 AMI BIOS Post Code 82

Glossary

85

Technical Support

91

3

http://www.tyan.com

Check the box contents!

1x S7016 motherboard

2 x Serial ATA Cable

1 x USB2.0 cable

1 x S7016 user’s manual

1 x S7016 Quick Reference guide

1 x TYAN driver CD

1 x I/O shield

2 x 1U passive heatsinks (proprietary)

(CHSK-0380, MiTAC P/N 343780900001)

2 x mini SAS Cable (S7016WGM3NR)

1 x mini SAS Cable (S7016GM3NR)

If any of these items are missing, please contact your vendor/dealer for

replacement before continuing with the installation process.

NOTE: Please contact your vendor for optional cables and proprietary heatsinks

purchase.

4

http://www.tyan.com

NOTE

5

http://www.tyan.com

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. Based on Intel

®

5520 (Tylersburg-36D) and Intel

®

82801JIR ICH10/R chipsets, the S7016 is

designed to support up to two Nehalem-EP 5500 Series processors and up to

144GB DDR3 registered ECC 800/1066/1333 memory, providing a rich feature set

and incredible performance. Leveraging advanced technology from Intel, the S7016

is capable of offering scalable 32 and 64-bit computing, high-bandwidth memory

design, and lightning-fast PCI-E bus implementation.

The S7016 not only empowers your company in today’s demanding IT environment

but also offers a smooth path for future application usage. All of this provides the

S7016 the power and flexibility to meet the needs of nearly any server application.

Remember to visit TYAN’s Website at http://www.tyan.com. There you can find

information on all of TYAN’s products with FAQs, online manuals and BIOS

upgrades.

1.2 - Hardware Specifications

S7016WGM3NR

Supported CPU

Series

Intel Xeon Processor 5500 Series

Socket Type /

Q'ty

LGA1366 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 95W

Processor

System Bus

Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect

(QPI) support

Chipset IOH / ICH Intel 5520 / ICH10R

Supported DIMM

Qty

(18) DIMM slots

DIMM Type /

Speed

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1 per

channel for 1333MHz speed

Capacity Up to 144GB at launch w/ dual rank RDIMMs

Memory channel 3 Channels per CPU

Memory

Memory voltage 1.5V

PCI-E (1) PCI-E Gen.2 x16 slot / (2) PCI-E Gen.2 x8 slots

Expansion Slots

Recommended

TYAN Riser Card

M2083-RS, PCI-E x16 1U riser card (left) / M2081-2, PCI-E

x8 1U riser card (right)

Recommended

Barebone /

Chassis

1U Barebone GT24-B7016

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel 82576EB

Connector (2) Mini-SAS connectors (totally support 8 ports)

Storage SAS

Controller LSI SAS1068E

6

http://www.tyan.com

Speed 3.0 Gb/s

RAID RAID 0/1/1E (LSI Integrated RAID)

Connector (1) Mini-SAS (4-port) + (2) SATA

Controller ICH10R

Speed 3.0 Gb/s

SATA

RAID RAID 0/1/10/5 (Intel Matrix RAID)

Connector type D-Sub 15-pin

Resolution 1600x1200@75Hz

Graphic

Chipset ServerEngines Pilot2

USB (7) USB2.0 ports (2 at rear, 4 via cable, 1 type A onboard)

COM (2) ports (1 at rear, 1 via cable)

PS/2 (1) PS/2 connector

SAS (2) Mini-SAS (4-in-1) connectors

VGA (1) D-Sub 15-pin VGA port

RJ-45 Total (3) GbE ports, (1) shared with IPMI

Power SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (1) Mini-SAS connector & (2) SATA-II connectors

Chipset Winbond W83793G

Voltage Monitors voltage for CPU, memory, chipset & power supply

Fan Total (7) 4-pin headers / Total (6) 8-pin headers

Temperature Monitors temperature for CPU & system environment

System

Monitoring

Others Chassis intrusion detection / Watchdog timer support

Onboard Chipset Onboard ServerEngines Pilot2

ServerEngines

Pilot2 IPMI

Feature

IPMI 2.0 compliant baseboard management controller (BMC)

/ Supports storage over IP and remote platform-flash/ BIOS

update / Hardware-based security engine for SSL

acceleration

Server

Management

ServerEngines

Pilot2 iKVM

Feature

Highest resolution secured KVM over IP / Dual 10/100 Mb/s

MAC interfaces

Brand / ROM size AMI / 4MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot

/ ACPI 2.0 power management /Power on mode after power

recovery / User-configurable H/W monitoring / Auto-

configurable of hard disk types / Multiple boot options

Form Factor EATX

Form Factor

Board Dimension 12"x13" (305x330mm)

Operating

System

OS supported list

Please refer to our OS supported list.

http://www.tyan.com/tech/os_support1.aspx

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Complaint

Yes

Motherboard (1) S7016 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

Package

Contains

I/O Shield (1) I/O Shield

7

http://www.tyan.com

SATA

(2) SATA signal cables / (1) CCBL-067O, Mini-SAS cable for

GT24-B7016

SAS (1) CCBL-067O, Mini-SAS cable for GT24-B7016

Cable

USB (1) CCBL-035J, 2-port USB bracket cable

Heatsink CHSK-0380, LGA1366 CPU heatsink for S7016 (proprietary)

Riser Card

M2083-RS, PCI-E 1U riser card (left) / M2081-2, PCI-E x16

1U riser card (right)

Optional

accessories for

future upgrade

Cable

(1) CCBL-0615, COM port bracket cable / (1) CCBL-0311,

SATA 1-to-2 power cable / (1) CCBL-035J, 2-port USB

bracket cable / (1) CCBL-067O, Mini-SAS cable for GT24-

B7016

S7016GM3NR

Supported CPU

Series

Intel Xeon Processor 5500 Series

Socket Type /

Q'ty

LGA1366 / (2)

Thermal Design

Power (TDP)

wattage

Max up to 95W

Processor

System Bus

Up to 4.8/ 5.86/ 6.4GT/s with Intel QuickPath Interconnect

(QPI) support

Chipset IOH / ICH Intel 5520 / ICH10R

Supported DIMM

Qty

(18) DIMM slots

DIMM Type /

Speed

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1 per

channel for 1333MHz speed

Capacity Up to 144GB at launch w/ dual rank RDIMMs

Memory channel 3 Channels per CPU

Memory

Memory voltage 1.5V

PCI-E (1) PCI-E Gen.2 x16 slot / (2) PCI-E Gen.2 x8 slots

Expansion Slots

Recommended

TYAN Riser Card

M2083-RS, PCI-E x16 1U riser card (left) / M2081-2, PCI-E

x8 1U riser card (right)

Recommended

Barebone /

Chassis

1U Barebone GT24-B7016

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel 82576EB

Connector (1) Mini-SAS (4-port) + (2) SATA

Controller ICH10R

Speed 3.0 Gb/s

Storage SATA

RAID RAID 0/1/10/5 (Intel Matrix RAID)

Connector type D-Sub 15-pin

Resolution 1600x1200@75Hz

Graphic

Chipset ServerEngines Pilot2

USB (7) USB2.0 ports (2 at rear, 4 via cable, 1 type A onboard)

COM (2) ports (1 at rear, 1 via cable)

PS/2 (1) PS/2 connector

VGA (1) D-Sub 15-pin VGA port

RJ-45 Total (3) GbE ports, (1) shared with IPMI

Power SSI 24-pin + 8-pin + 8-pin power connectors / EPS12V

Front Panel (1) 2x12-pin SSI front panel header

Input /Output

SATA (1) Mini-SAS connector & (2) SATA-II connectors

8

http://www.tyan.com

Chipset Winbond W83793G

Voltage Monitors voltage for CPU, memory, chipset & power supply

Fan Total (7) 4-pin headers / Total (6) 8-pin headers

Temperature Monitors temperature for CPU & system environment

System

Monitoring

Others Chassis intrusion detection / Watchdog timer support

Onboard Chipset Onboard ServerEngines Pilot2

ServerEngines

Pilot2 IPMI

Feature

IPMI 2.0 compliant baseboard management controller (BMC)

/ Supports storage over IP and remote platform-flash/ BIOS

update / Hardware-based security engine for SSL

acceleration

Server

Management

ServerEngines

Pilot2 iKVM

Feature

Highest resolution secured KVM over IP / Dual 10/100 Mb/s

MAC interfaces

Brand / ROM size AMI / 4MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE boot

/ ACPI 2.0 power management /Power on mode after power

recovery / User-configurable H/W monitoring / Auto-

configurable of hard disk types / Multiple boot options

Form Factor EATX

Form Factor

Board Dimension 12"x13" (305x330mm)

Operating

System

OS supported list

Please refer to our OS supported list.

http://www.tyan.com/tech/os_support1.aspx

FCC (DoC) Class B

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS

RoHS 6/6

Complaint

Yes

Motherboard (1) S7016 Motherboard

Manual (1) User's manual / (1) Quick Ref. Guide

Installation CD (1) TYAN installation CD

I/O Shield (1) I/O Shield

SATA

(2) SATA signal cables / (1) CCBL-067O, Mini-SAS cable for

GT24-B7016

Package

Contains

Cable

USB (1) CCBL-035J, 2-port USB bracket cable

Heatsink CHSK-0380, LGA1366 CPU heatsink for S7016 (proprietary)

Riser Card

M2083-RS, PCI-E 1U riser card (left) / M2081-2, PCI-E x16

1U riser card (right)

Optional

accessories for

future upgrade

Cable

(1) CCBL-0615, COM port bracket cable / (1) CCBL-0311,

SATA 1-to-2 power cable / (1) CCBL-035J, 2-port USB

bracket cable / (1) CCBL-067O, Mini-SAS cable for GT24-

B7016

1.3 – Server Engines Pilot2

Please visit the TYAN Web Site at http://www.tyan.com to download the latest

Server Engines Pilot2 User’s Guide.

9

http://www.tyan.com

Chapter 2: Board Installation

You are now ready to install your motherboard. The mounting hole pattern of the

S7016 matches the EATX specification. Before continuing with installation, confirm

that your chassis supports an EATX motherboard.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic

bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE

DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED.

10

http://www.tyan.com

2.1 - Board Image

S7016

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above

picture.

11

http://www.tyan.com

2.2 - Block Diagram

S7016

12

http://www.tyan.com

2.3 - Board Parts, Jumpers and Connectors

S7016

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend



OPEN - Jumper OFF, without jumper cover



CLOSED – Jumper ON, with jumper cover

13

http://www.tyan.com

Jumper/Connector Function

J3 IPMB Connector

J4 Front Panel Connector

J7 PSMI Connector

J11/J12 USB Front Panel Header (blue)

J16 COM2 Connector

J17 CPLD JTAG Header

J22 ICH SGPIO Header

J27 Chassis Intrusion Header

J49/J51/J52/J53/J54/J55 8-pin 4056 Fan Connector (reserved for BB)

J5/J21/J24/J25/J28/J30/J50 4-pin Fan Connector

J57 Power Switch

J58 Reset Switch

J59 LAN3 LED Header

USB1 Type-A USB Connector

J6 SAS Enable/Disable Jumper

J56 BMC Enable/Disable Jumper

J60 BMC Update Jumper

J61 Flash Manageability Engine (ME) Jumper

JP1 Clear CMOS Jumper

JP2/JP3 COM2 Switch Jumper

JP8 BMC Flash Jumper

JP9 PCI-E x8/x16 select Jumper

14

http://www.tyan.com

J16

J3

J11

J12

J4

15

http://www.tyan.com

J11/J12: USB Front Panel Header (Blue)

10 2

9

1

Pin Signal Pin Signal

1 +5V 2 +5V

3 USB D- 4 USB D-

5 USB D+ 6 USB D+

7 GND 8 GND

9 KEY 10 GND

J16: COM2 Connector

10

9

1

Pin Signal Pin Signal

1 DCD 2 DSR

3 RXD 4 RTS

5 TXD 6 CTS

7 DTR 8 RI

9 GND 10 KEY

J4: Standard Front Panel Connector

2

4

23

2

1

NOTE1: +3.3V power rail is IDLED, WLED

(Warning LED), LANLED

NOTE2: +5V power rail is PWRLED, HDLED

Pin Signal Pin Signal

1 PWRLED+ 2 +3VSB

3 KEY 4 IDLED+

5 PWRLED- 6 IDLED-

7 HDLED+ 8 WLED1-

9 HDLED- 10 WLED2-

11 PWRSW+ 12 LAN1LED+

13 GND 14 LAN1LED-

15 RSTSW 16 SMBDAT

17 GND 18 SMBCLK

19 IDLED_SW 20 INTRD#

21 GND 22 LAN2LED+

23 NMI_SW- 24 LAN2LED-

J3: IPMB Connector

1

Pin Signal Pin Signal

1 IPMB DATA 2 GND

3 IPMB CLK 4 NC

16

http://www.tyan.com

USB1

J24

J21

J30

J50

J49

J25

J5

J28

J55

J54

J53

J52

J51

J27

J17 J22

17

http://www.tyan.com

J5/J21/J24/J25/J28/J30/J50: 4-pin Fan Header

+12V

PWM Control

GND

Tachometer

1

+12V

PWM Control

GND

Tachometer

1

Use this header to connect the

cooling fan to your

motherboard to keep the

system at optimum

performance levels.

J49/J51/J52/J53/J54/J55: 8-pin 4056 Fan Header (reserved for barebone)

Pin Signal Pin Signal

1 PWM1 2 +12V

3 TACH1 4 GND

5 GND 6 TACH2

7 +12V 8 PWM2

USB1: Type-A USB Connector

Pin Signal Pin Signal

1 +5v 2 USB D-

3 USB D+ 4 GND

J27: Chassis Intrusion Header

1

Pin Signal Pin Signal

1 INTRUDER# 2 GND

J17: CPLD JTAG Header

10

9

2

1

Pin Signal Pin Signal

1 JTAG_TCK 2 GND

3 JTAG_TDO 4 +3.3V

5 JTAG_TMS 6 NC

7 NC 8 KEY

9 JTAQG_TDI 10 GND

J22: ICH SGPIO Header

10

9

1

Pin Signal Pin Signal

1 SMBCLK 2 SDATAOUT0

3 SMBDAT 4 SDATAOUT1

5 GND 6 SLOAD

7 KEY 8 SCLOCK

9 NC 10 NC

18

http://www.tyan.com

JP2/JP3

JP8

JP1

JP9

J7

19

http://www.tyan.com

JP1: Clear CMOS Jumper

1

3

Normal

(Default)

1

3

Clear

Use this jumper when you forgot your system/setup

password or need to clear system BIOS setting.

How to clear the CMOS data

- Power off system and disconnect power

supply from AC source

- Use jumper cap to close Pin_2 and 3 for

several seconds to Clear CMOS

- Replace jumper cap to close Pin_1 and 2

Reconnect power supply to AC source

Power on system

JP2/JP3: COM2 Switch Jumper

3

1

Pin 1-2 Closed: COM2 (Default)

3

1

Pin 2-3 Closed: BMC UART2 to COM2

JP8: BMC Boot FW Flash Jumper

1

3

Pin 1-2 Closed: Disable

1

3

Pin 2-3 Closed: Enable (Default)

JP9: PCIE x8/x16 Select Jumper

1

3

Pin 1-2 Closed: PCIE Slot6 x16 (Default)

3

1

Pin 2-3 Closed: PCIE Slot5/6 x8

J7: PSMI Connector

1

Pin Signal Pin Signal

1 SMB_CLK 2 SMB_DAT

3 SMBALERT 4 GND

5 V3P3

20

http://www.tyan.com

J60/J56

J59

J6

J61

La pagina sta caricando ...

Tyan S7016 Manuale utente

Tyan S7016 Manuale utente

in altre lingue

Documenti correlati

Altri documenti